| /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/circ_buf.h> |
| #include <linux/slab.h> |
| #include <linux/sysrq.h> |
| |
| #include <drm/drm_drv.h> |
| #include <drm/drm_irq.h> |
| |
| #include "display/intel_display_types.h" |
| #include "display/intel_fifo_underrun.h" |
| #include "display/intel_hotplug.h" |
| #include "display/intel_lpe_audio.h" |
| #include "display/intel_psr.h" |
| |
| #include "gt/intel_gt.h" |
| #include "gt/intel_gt_irq.h" |
| #include "gt/intel_gt_pm_irq.h" |
| #include "gt/intel_rps.h" |
| |
| #include "i915_drv.h" |
| #include "i915_irq.h" |
| #include "i915_trace.h" |
| #include "intel_pm.h" |
| |
| /** |
| * DOC: interrupt handling |
| * |
| * These functions provide the basic support for enabling and disabling the |
| * interrupt handling support. There's a lot more functionality in i915_irq.c |
| * and related files, but that will be described in separate chapters. |
| */ |
| |
| typedef bool (*long_pulse_detect_func)(enum hpd_pin pin, u32 val); |
| |
| static const u32 hpd_ilk[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = DE_DP_A_HOTPLUG, |
| }; |
| |
| static const u32 hpd_ivb[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = DE_DP_A_HOTPLUG_IVB, |
| }; |
| |
| static const u32 hpd_bdw[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = GEN8_PORT_DP_A_HOTPLUG, |
| }; |
| |
| static const u32 hpd_ibx[HPD_NUM_PINS] = { |
| [HPD_CRT] = SDE_CRT_HOTPLUG, |
| [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG, |
| }; |
| |
| static const u32 hpd_cpt[HPD_NUM_PINS] = { |
| [HPD_CRT] = SDE_CRT_HOTPLUG_CPT, |
| [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG_CPT, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT, |
| }; |
| |
| static const u32 hpd_spt[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = SDE_PORTA_HOTPLUG_SPT, |
| [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT, |
| [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT, |
| [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT, |
| [HPD_PORT_E] = SDE_PORTE_HOTPLUG_SPT, |
| }; |
| |
| static const u32 hpd_mask_i915[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_EN, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_EN, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_EN, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_EN, |
| }; |
| |
| static const u32 hpd_status_g4x[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_STATUS, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS, |
| }; |
| |
| static const u32 hpd_status_i915[HPD_NUM_PINS] = { |
| [HPD_CRT] = CRT_HOTPLUG_INT_STATUS, |
| [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915, |
| [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915, |
| [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS, |
| [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS, |
| [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS, |
| }; |
| |
| static const u32 hpd_bxt[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = BXT_DE_PORT_HP_DDIA, |
| [HPD_PORT_B] = BXT_DE_PORT_HP_DDIB, |
| [HPD_PORT_C] = BXT_DE_PORT_HP_DDIC, |
| }; |
| |
| static const u32 hpd_gen11[HPD_NUM_PINS] = { |
| [HPD_PORT_C] = GEN11_TC1_HOTPLUG | GEN11_TBT1_HOTPLUG, |
| [HPD_PORT_D] = GEN11_TC2_HOTPLUG | GEN11_TBT2_HOTPLUG, |
| [HPD_PORT_E] = GEN11_TC3_HOTPLUG | GEN11_TBT3_HOTPLUG, |
| [HPD_PORT_F] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG, |
| }; |
| |
| static const u32 hpd_gen12[HPD_NUM_PINS] = { |
| [HPD_PORT_D] = GEN11_TC1_HOTPLUG | GEN11_TBT1_HOTPLUG, |
| [HPD_PORT_E] = GEN11_TC2_HOTPLUG | GEN11_TBT2_HOTPLUG, |
| [HPD_PORT_F] = GEN11_TC3_HOTPLUG | GEN11_TBT3_HOTPLUG, |
| [HPD_PORT_G] = GEN11_TC4_HOTPLUG | GEN11_TBT4_HOTPLUG, |
| [HPD_PORT_H] = GEN12_TC5_HOTPLUG | GEN12_TBT5_HOTPLUG, |
| [HPD_PORT_I] = GEN12_TC6_HOTPLUG | GEN12_TBT6_HOTPLUG, |
| }; |
| |
| static const u32 hpd_icp[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = SDE_DDI_HOTPLUG_ICP(PORT_A), |
| [HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(PORT_B), |
| [HPD_PORT_C] = SDE_TC_HOTPLUG_ICP(PORT_TC1), |
| [HPD_PORT_D] = SDE_TC_HOTPLUG_ICP(PORT_TC2), |
| [HPD_PORT_E] = SDE_TC_HOTPLUG_ICP(PORT_TC3), |
| [HPD_PORT_F] = SDE_TC_HOTPLUG_ICP(PORT_TC4), |
| }; |
| |
| static const u32 hpd_tgp[HPD_NUM_PINS] = { |
| [HPD_PORT_A] = SDE_DDI_HOTPLUG_ICP(PORT_A), |
| [HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(PORT_B), |
| [HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(PORT_C), |
| [HPD_PORT_D] = SDE_TC_HOTPLUG_ICP(PORT_TC1), |
| [HPD_PORT_E] = SDE_TC_HOTPLUG_ICP(PORT_TC2), |
| [HPD_PORT_F] = SDE_TC_HOTPLUG_ICP(PORT_TC3), |
| [HPD_PORT_G] = SDE_TC_HOTPLUG_ICP(PORT_TC4), |
| [HPD_PORT_H] = SDE_TC_HOTPLUG_ICP(PORT_TC5), |
| [HPD_PORT_I] = SDE_TC_HOTPLUG_ICP(PORT_TC6), |
| }; |
| |
| static void intel_hpd_init_pins(struct drm_i915_private *dev_priv) |
| { |
| struct i915_hotplug *hpd = &dev_priv->hotplug; |
| |
| if (HAS_GMCH(dev_priv)) { |
| if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv)) |
| hpd->hpd = hpd_status_g4x; |
| else |
| hpd->hpd = hpd_status_i915; |
| return; |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 12) |
| hpd->hpd = hpd_gen12; |
| else if (INTEL_GEN(dev_priv) >= 11) |
| hpd->hpd = hpd_gen11; |
| else if (IS_GEN9_LP(dev_priv)) |
| hpd->hpd = hpd_bxt; |
| else if (INTEL_GEN(dev_priv) >= 8) |
| hpd->hpd = hpd_bdw; |
| else if (INTEL_GEN(dev_priv) >= 7) |
| hpd->hpd = hpd_ivb; |
| else |
| hpd->hpd = hpd_ilk; |
| |
| if (!HAS_PCH_SPLIT(dev_priv) || HAS_PCH_NOP(dev_priv)) |
| return; |
| |
| if (HAS_PCH_TGP(dev_priv) || HAS_PCH_JSP(dev_priv)) |
| hpd->pch_hpd = hpd_tgp; |
| else if (HAS_PCH_ICP(dev_priv) || HAS_PCH_MCC(dev_priv)) |
| hpd->pch_hpd = hpd_icp; |
| else if (HAS_PCH_CNP(dev_priv) || HAS_PCH_SPT(dev_priv)) |
| hpd->pch_hpd = hpd_spt; |
| else if (HAS_PCH_LPT(dev_priv) || HAS_PCH_CPT(dev_priv)) |
| hpd->pch_hpd = hpd_cpt; |
| else if (HAS_PCH_IBX(dev_priv)) |
| hpd->pch_hpd = hpd_ibx; |
| else |
| MISSING_CASE(INTEL_PCH_TYPE(dev_priv)); |
| } |
| |
| static void |
| intel_handle_vblank(struct drm_i915_private *dev_priv, enum pipe pipe) |
| { |
| struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| |
| drm_crtc_handle_vblank(&crtc->base); |
| } |
| |
| void gen3_irq_reset(struct intel_uncore *uncore, i915_reg_t imr, |
| i915_reg_t iir, i915_reg_t ier) |
| { |
| intel_uncore_write(uncore, imr, 0xffffffff); |
| intel_uncore_posting_read(uncore, imr); |
| |
| intel_uncore_write(uncore, ier, 0); |
| |
| /* IIR can theoretically queue up two events. Be paranoid. */ |
| intel_uncore_write(uncore, iir, 0xffffffff); |
| intel_uncore_posting_read(uncore, iir); |
| intel_uncore_write(uncore, iir, 0xffffffff); |
| intel_uncore_posting_read(uncore, iir); |
| } |
| |
| void gen2_irq_reset(struct intel_uncore *uncore) |
| { |
| intel_uncore_write16(uncore, GEN2_IMR, 0xffff); |
| intel_uncore_posting_read16(uncore, GEN2_IMR); |
| |
| intel_uncore_write16(uncore, GEN2_IER, 0); |
| |
| /* IIR can theoretically queue up two events. Be paranoid. */ |
| intel_uncore_write16(uncore, GEN2_IIR, 0xffff); |
| intel_uncore_posting_read16(uncore, GEN2_IIR); |
| intel_uncore_write16(uncore, GEN2_IIR, 0xffff); |
| intel_uncore_posting_read16(uncore, GEN2_IIR); |
| } |
| |
| /* |
| * We should clear IMR at preinstall/uninstall, and just check at postinstall. |
| */ |
| static void gen3_assert_iir_is_zero(struct intel_uncore *uncore, i915_reg_t reg) |
| { |
| u32 val = intel_uncore_read(uncore, reg); |
| |
| if (val == 0) |
| return; |
| |
| drm_WARN(&uncore->i915->drm, 1, |
| "Interrupt register 0x%x is not zero: 0x%08x\n", |
| i915_mmio_reg_offset(reg), val); |
| intel_uncore_write(uncore, reg, 0xffffffff); |
| intel_uncore_posting_read(uncore, reg); |
| intel_uncore_write(uncore, reg, 0xffffffff); |
| intel_uncore_posting_read(uncore, reg); |
| } |
| |
| static void gen2_assert_iir_is_zero(struct intel_uncore *uncore) |
| { |
| u16 val = intel_uncore_read16(uncore, GEN2_IIR); |
| |
| if (val == 0) |
| return; |
| |
| drm_WARN(&uncore->i915->drm, 1, |
| "Interrupt register 0x%x is not zero: 0x%08x\n", |
| i915_mmio_reg_offset(GEN2_IIR), val); |
| intel_uncore_write16(uncore, GEN2_IIR, 0xffff); |
| intel_uncore_posting_read16(uncore, GEN2_IIR); |
| intel_uncore_write16(uncore, GEN2_IIR, 0xffff); |
| intel_uncore_posting_read16(uncore, GEN2_IIR); |
| } |
| |
| void gen3_irq_init(struct intel_uncore *uncore, |
| i915_reg_t imr, u32 imr_val, |
| i915_reg_t ier, u32 ier_val, |
| i915_reg_t iir) |
| { |
| gen3_assert_iir_is_zero(uncore, iir); |
| |
| intel_uncore_write(uncore, ier, ier_val); |
| intel_uncore_write(uncore, imr, imr_val); |
| intel_uncore_posting_read(uncore, imr); |
| } |
| |
| void gen2_irq_init(struct intel_uncore *uncore, |
| u32 imr_val, u32 ier_val) |
| { |
| gen2_assert_iir_is_zero(uncore); |
| |
| intel_uncore_write16(uncore, GEN2_IER, ier_val); |
| intel_uncore_write16(uncore, GEN2_IMR, imr_val); |
| intel_uncore_posting_read16(uncore, GEN2_IMR); |
| } |
| |
| /* For display hotplug interrupt */ |
| static inline void |
| i915_hotplug_interrupt_update_locked(struct drm_i915_private *dev_priv, |
| u32 mask, |
| u32 bits) |
| { |
| u32 val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| drm_WARN_ON(&dev_priv->drm, bits & ~mask); |
| |
| val = I915_READ(PORT_HOTPLUG_EN); |
| val &= ~mask; |
| val |= bits; |
| I915_WRITE(PORT_HOTPLUG_EN, val); |
| } |
| |
| /** |
| * i915_hotplug_interrupt_update - update hotplug interrupt enable |
| * @dev_priv: driver private |
| * @mask: bits to update |
| * @bits: bits to enable |
| * NOTE: the HPD enable bits are modified both inside and outside |
| * of an interrupt context. To avoid that read-modify-write cycles |
| * interfer, these bits are protected by a spinlock. Since this |
| * function is usually not called from a context where the lock is |
| * held already, this function acquires the lock itself. A non-locking |
| * version is also available. |
| */ |
| void i915_hotplug_interrupt_update(struct drm_i915_private *dev_priv, |
| u32 mask, |
| u32 bits) |
| { |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_hotplug_interrupt_update_locked(dev_priv, mask, bits); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| /** |
| * ilk_update_display_irq - update DEIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void ilk_update_display_irq(struct drm_i915_private *dev_priv, |
| u32 interrupt_mask, |
| u32 enabled_irq_mask) |
| { |
| u32 new_val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| drm_WARN_ON(&dev_priv->drm, enabled_irq_mask & ~interrupt_mask); |
| |
| if (drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv))) |
| return; |
| |
| new_val = dev_priv->irq_mask; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->irq_mask) { |
| dev_priv->irq_mask = new_val; |
| I915_WRITE(DEIMR, dev_priv->irq_mask); |
| POSTING_READ(DEIMR); |
| } |
| } |
| |
| /** |
| * bdw_update_port_irq - update DE port interrupt |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| static void bdw_update_port_irq(struct drm_i915_private *dev_priv, |
| u32 interrupt_mask, |
| u32 enabled_irq_mask) |
| { |
| u32 new_val; |
| u32 old_val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| drm_WARN_ON(&dev_priv->drm, enabled_irq_mask & ~interrupt_mask); |
| |
| if (drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv))) |
| return; |
| |
| old_val = I915_READ(GEN8_DE_PORT_IMR); |
| |
| new_val = old_val; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != old_val) { |
| I915_WRITE(GEN8_DE_PORT_IMR, new_val); |
| POSTING_READ(GEN8_DE_PORT_IMR); |
| } |
| } |
| |
| /** |
| * bdw_update_pipe_irq - update DE pipe interrupt |
| * @dev_priv: driver private |
| * @pipe: pipe whose interrupt to update |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void bdw_update_pipe_irq(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| u32 interrupt_mask, |
| u32 enabled_irq_mask) |
| { |
| u32 new_val; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| drm_WARN_ON(&dev_priv->drm, enabled_irq_mask & ~interrupt_mask); |
| |
| if (drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv))) |
| return; |
| |
| new_val = dev_priv->de_irq_mask[pipe]; |
| new_val &= ~interrupt_mask; |
| new_val |= (~enabled_irq_mask & interrupt_mask); |
| |
| if (new_val != dev_priv->de_irq_mask[pipe]) { |
| dev_priv->de_irq_mask[pipe] = new_val; |
| I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]); |
| POSTING_READ(GEN8_DE_PIPE_IMR(pipe)); |
| } |
| } |
| |
| /** |
| * ibx_display_interrupt_update - update SDEIMR |
| * @dev_priv: driver private |
| * @interrupt_mask: mask of interrupt bits to update |
| * @enabled_irq_mask: mask of interrupt bits to enable |
| */ |
| void ibx_display_interrupt_update(struct drm_i915_private *dev_priv, |
| u32 interrupt_mask, |
| u32 enabled_irq_mask) |
| { |
| u32 sdeimr = I915_READ(SDEIMR); |
| sdeimr &= ~interrupt_mask; |
| sdeimr |= (~enabled_irq_mask & interrupt_mask); |
| |
| drm_WARN_ON(&dev_priv->drm, enabled_irq_mask & ~interrupt_mask); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv))) |
| return; |
| |
| I915_WRITE(SDEIMR, sdeimr); |
| POSTING_READ(SDEIMR); |
| } |
| |
| u32 i915_pipestat_enable_mask(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| u32 status_mask = dev_priv->pipestat_irq_mask[pipe]; |
| u32 enable_mask = status_mask << 16; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (INTEL_GEN(dev_priv) < 5) |
| goto out; |
| |
| /* |
| * On pipe A we don't support the PSR interrupt yet, |
| * on pipe B and C the same bit MBZ. |
| */ |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, |
| status_mask & PIPE_A_PSR_STATUS_VLV)) |
| return 0; |
| /* |
| * On pipe B and C we don't support the PSR interrupt yet, on pipe |
| * A the same bit is for perf counters which we don't use either. |
| */ |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, |
| status_mask & PIPE_B_PSR_STATUS_VLV)) |
| return 0; |
| |
| enable_mask &= ~(PIPE_FIFO_UNDERRUN_STATUS | |
| SPRITE0_FLIP_DONE_INT_EN_VLV | |
| SPRITE1_FLIP_DONE_INT_EN_VLV); |
| if (status_mask & SPRITE0_FLIP_DONE_INT_STATUS_VLV) |
| enable_mask |= SPRITE0_FLIP_DONE_INT_EN_VLV; |
| if (status_mask & SPRITE1_FLIP_DONE_INT_STATUS_VLV) |
| enable_mask |= SPRITE1_FLIP_DONE_INT_EN_VLV; |
| |
| out: |
| drm_WARN_ONCE(&dev_priv->drm, |
| enable_mask & ~PIPESTAT_INT_ENABLE_MASK || |
| status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: enable_mask=0x%x, status_mask=0x%x\n", |
| pipe_name(pipe), enable_mask, status_mask); |
| |
| return enable_mask; |
| } |
| |
| void i915_enable_pipestat(struct drm_i915_private *dev_priv, |
| enum pipe pipe, u32 status_mask) |
| { |
| i915_reg_t reg = PIPESTAT(pipe); |
| u32 enable_mask; |
| |
| drm_WARN_ONCE(&dev_priv->drm, status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: status_mask=0x%x\n", |
| pipe_name(pipe), status_mask); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv)); |
| |
| if ((dev_priv->pipestat_irq_mask[pipe] & status_mask) == status_mask) |
| return; |
| |
| dev_priv->pipestat_irq_mask[pipe] |= status_mask; |
| enable_mask = i915_pipestat_enable_mask(dev_priv, pipe); |
| |
| I915_WRITE(reg, enable_mask | status_mask); |
| POSTING_READ(reg); |
| } |
| |
| void i915_disable_pipestat(struct drm_i915_private *dev_priv, |
| enum pipe pipe, u32 status_mask) |
| { |
| i915_reg_t reg = PIPESTAT(pipe); |
| u32 enable_mask; |
| |
| drm_WARN_ONCE(&dev_priv->drm, status_mask & ~PIPESTAT_INT_STATUS_MASK, |
| "pipe %c: status_mask=0x%x\n", |
| pipe_name(pipe), status_mask); |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| drm_WARN_ON(&dev_priv->drm, !intel_irqs_enabled(dev_priv)); |
| |
| if ((dev_priv->pipestat_irq_mask[pipe] & status_mask) == 0) |
| return; |
| |
| dev_priv->pipestat_irq_mask[pipe] &= ~status_mask; |
| enable_mask = i915_pipestat_enable_mask(dev_priv, pipe); |
| |
| I915_WRITE(reg, enable_mask | status_mask); |
| POSTING_READ(reg); |
| } |
| |
| static bool i915_has_asle(struct drm_i915_private *dev_priv) |
| { |
| if (!dev_priv->opregion.asle) |
| return false; |
| |
| return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv); |
| } |
| |
| /** |
| * i915_enable_asle_pipestat - enable ASLE pipestat for OpRegion |
| * @dev_priv: i915 device private |
| */ |
| static void i915_enable_asle_pipestat(struct drm_i915_private *dev_priv) |
| { |
| if (!i915_has_asle(dev_priv)) |
| return; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_LEGACY_BLC_EVENT_STATUS); |
| if (INTEL_GEN(dev_priv) >= 4) |
| i915_enable_pipestat(dev_priv, PIPE_A, |
| PIPE_LEGACY_BLC_EVENT_STATUS); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| /* |
| * This timing diagram depicts the video signal in and |
| * around the vertical blanking period. |
| * |
| * Assumptions about the fictitious mode used in this example: |
| * vblank_start >= 3 |
| * vsync_start = vblank_start + 1 |
| * vsync_end = vblank_start + 2 |
| * vtotal = vblank_start + 3 |
| * |
| * start of vblank: |
| * latch double buffered registers |
| * increment frame counter (ctg+) |
| * generate start of vblank interrupt (gen4+) |
| * | |
| * | frame start: |
| * | generate frame start interrupt (aka. vblank interrupt) (gmch) |
| * | may be shifted forward 1-3 extra lines via PIPECONF |
| * | | |
| * | | start of vsync: |
| * | | generate vsync interrupt |
| * | | | |
| * ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx |
| * . \hs/ . \hs/ \hs/ \hs/ . \hs/ |
| * ----va---> <-----------------vb--------------------> <--------va------------- |
| * | | <----vs-----> | |
| * -vbs-----> <---vbs+1---> <---vbs+2---> <-----0-----> <-----1-----> <-----2--- (scanline counter gen2) |
| * -vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2---> <-----0--- (scanline counter gen3+) |
| * -vbs-2---> <---vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2- (scanline counter hsw+ hdmi) |
| * | | | |
| * last visible pixel first visible pixel |
| * | increment frame counter (gen3/4) |
| * pixel counter = vblank_start * htotal pixel counter = 0 (gen3/4) |
| * |
| * x = horizontal active |
| * _ = horizontal blanking |
| * hs = horizontal sync |
| * va = vertical active |
| * vb = vertical blanking |
| * vs = vertical sync |
| * vbs = vblank_start (number) |
| * |
| * Summary: |
| * - most events happen at the start of horizontal sync |
| * - frame start happens at the start of horizontal blank, 1-4 lines |
| * (depending on PIPECONF settings) after the start of vblank |
| * - gen3/4 pixel and frame counter are synchronized with the start |
| * of horizontal active on the first line of vertical active |
| */ |
| |
| /* Called from drm generic code, passed a 'crtc', which |
| * we use as a pipe index |
| */ |
| u32 i915_get_vblank_counter(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| struct drm_vblank_crtc *vblank = &dev_priv->drm.vblank[drm_crtc_index(crtc)]; |
| const struct drm_display_mode *mode = &vblank->hwmode; |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| i915_reg_t high_frame, low_frame; |
| u32 high1, high2, low, pixel, vbl_start, hsync_start, htotal; |
| unsigned long irqflags; |
| |
| /* |
| * On i965gm TV output the frame counter only works up to |
| * the point when we enable the TV encoder. After that the |
| * frame counter ceases to work and reads zero. We need a |
| * vblank wait before enabling the TV encoder and so we |
| * have to enable vblank interrupts while the frame counter |
| * is still in a working state. However the core vblank code |
| * does not like us returning non-zero frame counter values |
| * when we've told it that we don't have a working frame |
| * counter. Thus we must stop non-zero values leaking out. |
| */ |
| if (!vblank->max_vblank_count) |
| return 0; |
| |
| htotal = mode->crtc_htotal; |
| hsync_start = mode->crtc_hsync_start; |
| vbl_start = mode->crtc_vblank_start; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vbl_start = DIV_ROUND_UP(vbl_start, 2); |
| |
| /* Convert to pixel count */ |
| vbl_start *= htotal; |
| |
| /* Start of vblank event occurs at start of hsync */ |
| vbl_start -= htotal - hsync_start; |
| |
| high_frame = PIPEFRAME(pipe); |
| low_frame = PIPEFRAMEPIXEL(pipe); |
| |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| |
| /* |
| * High & low register fields aren't synchronized, so make sure |
| * we get a low value that's stable across two reads of the high |
| * register. |
| */ |
| do { |
| high1 = intel_de_read_fw(dev_priv, high_frame) & PIPE_FRAME_HIGH_MASK; |
| low = intel_de_read_fw(dev_priv, low_frame); |
| high2 = intel_de_read_fw(dev_priv, high_frame) & PIPE_FRAME_HIGH_MASK; |
| } while (high1 != high2); |
| |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| high1 >>= PIPE_FRAME_HIGH_SHIFT; |
| pixel = low & PIPE_PIXEL_MASK; |
| low >>= PIPE_FRAME_LOW_SHIFT; |
| |
| /* |
| * The frame counter increments at beginning of active. |
| * Cook up a vblank counter by also checking the pixel |
| * counter against vblank start. |
| */ |
| return (((high1 << 8) | low) + (pixel >= vbl_start)) & 0xffffff; |
| } |
| |
| u32 g4x_get_vblank_counter(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| |
| return I915_READ(PIPE_FRMCOUNT_G4X(pipe)); |
| } |
| |
| /* |
| * On certain encoders on certain platforms, pipe |
| * scanline register will not work to get the scanline, |
| * since the timings are driven from the PORT or issues |
| * with scanline register updates. |
| * This function will use Framestamp and current |
| * timestamp registers to calculate the scanline. |
| */ |
| static u32 __intel_get_crtc_scanline_from_timestamp(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct drm_vblank_crtc *vblank = |
| &crtc->base.dev->vblank[drm_crtc_index(&crtc->base)]; |
| const struct drm_display_mode *mode = &vblank->hwmode; |
| u32 vblank_start = mode->crtc_vblank_start; |
| u32 vtotal = mode->crtc_vtotal; |
| u32 htotal = mode->crtc_htotal; |
| u32 clock = mode->crtc_clock; |
| u32 scanline, scan_prev_time, scan_curr_time, scan_post_time; |
| |
| /* |
| * To avoid the race condition where we might cross into the |
| * next vblank just between the PIPE_FRMTMSTMP and TIMESTAMP_CTR |
| * reads. We make sure we read PIPE_FRMTMSTMP and TIMESTAMP_CTR |
| * during the same frame. |
| */ |
| do { |
| /* |
| * This field provides read back of the display |
| * pipe frame time stamp. The time stamp value |
| * is sampled at every start of vertical blank. |
| */ |
| scan_prev_time = intel_de_read_fw(dev_priv, |
| PIPE_FRMTMSTMP(crtc->pipe)); |
| |
| /* |
| * The TIMESTAMP_CTR register has the current |
| * time stamp value. |
| */ |
| scan_curr_time = intel_de_read_fw(dev_priv, IVB_TIMESTAMP_CTR); |
| |
| scan_post_time = intel_de_read_fw(dev_priv, |
| PIPE_FRMTMSTMP(crtc->pipe)); |
| } while (scan_post_time != scan_prev_time); |
| |
| scanline = div_u64(mul_u32_u32(scan_curr_time - scan_prev_time, |
| clock), 1000 * htotal); |
| scanline = min(scanline, vtotal - 1); |
| scanline = (scanline + vblank_start) % vtotal; |
| |
| return scanline; |
| } |
| |
| /* |
| * intel_de_read_fw(), only for fast reads of display block, no need for |
| * forcewake etc. |
| */ |
| static int __intel_get_crtc_scanline(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| const struct drm_display_mode *mode; |
| struct drm_vblank_crtc *vblank; |
| enum pipe pipe = crtc->pipe; |
| int position, vtotal; |
| |
| if (!crtc->active) |
| return -1; |
| |
| vblank = &crtc->base.dev->vblank[drm_crtc_index(&crtc->base)]; |
| mode = &vblank->hwmode; |
| |
| if (crtc->mode_flags & I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP) |
| return __intel_get_crtc_scanline_from_timestamp(crtc); |
| |
| vtotal = mode->crtc_vtotal; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vtotal /= 2; |
| |
| if (IS_GEN(dev_priv, 2)) |
| position = intel_de_read_fw(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN2; |
| else |
| position = intel_de_read_fw(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; |
| |
| /* |
| * On HSW, the DSL reg (0x70000) appears to return 0 if we |
| * read it just before the start of vblank. So try it again |
| * so we don't accidentally end up spanning a vblank frame |
| * increment, causing the pipe_update_end() code to squak at us. |
| * |
| * The nature of this problem means we can't simply check the ISR |
| * bit and return the vblank start value; nor can we use the scanline |
| * debug register in the transcoder as it appears to have the same |
| * problem. We may need to extend this to include other platforms, |
| * but so far testing only shows the problem on HSW. |
| */ |
| if (HAS_DDI(dev_priv) && !position) { |
| int i, temp; |
| |
| for (i = 0; i < 100; i++) { |
| udelay(1); |
| temp = intel_de_read_fw(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; |
| if (temp != position) { |
| position = temp; |
| break; |
| } |
| } |
| } |
| |
| /* |
| * See update_scanline_offset() for the details on the |
| * scanline_offset adjustment. |
| */ |
| return (position + crtc->scanline_offset) % vtotal; |
| } |
| |
| static bool i915_get_crtc_scanoutpos(struct drm_crtc *_crtc, |
| bool in_vblank_irq, |
| int *vpos, int *hpos, |
| ktime_t *stime, ktime_t *etime, |
| const struct drm_display_mode *mode) |
| { |
| struct drm_device *dev = _crtc->dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_crtc *crtc = to_intel_crtc(_crtc); |
| enum pipe pipe = crtc->pipe; |
| int position; |
| int vbl_start, vbl_end, hsync_start, htotal, vtotal; |
| unsigned long irqflags; |
| bool use_scanline_counter = INTEL_GEN(dev_priv) >= 5 || |
| IS_G4X(dev_priv) || IS_GEN(dev_priv, 2) || |
| crtc->mode_flags & I915_MODE_FLAG_USE_SCANLINE_COUNTER; |
| |
| if (drm_WARN_ON(&dev_priv->drm, !mode->crtc_clock)) { |
| drm_dbg(&dev_priv->drm, |
| "trying to get scanoutpos for disabled " |
| "pipe %c\n", pipe_name(pipe)); |
| return false; |
| } |
| |
| htotal = mode->crtc_htotal; |
| hsync_start = mode->crtc_hsync_start; |
| vtotal = mode->crtc_vtotal; |
| vbl_start = mode->crtc_vblank_start; |
| vbl_end = mode->crtc_vblank_end; |
| |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| vbl_start = DIV_ROUND_UP(vbl_start, 2); |
| vbl_end /= 2; |
| vtotal /= 2; |
| } |
| |
| /* |
| * Lock uncore.lock, as we will do multiple timing critical raw |
| * register reads, potentially with preemption disabled, so the |
| * following code must not block on uncore.lock. |
| */ |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| |
| /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ |
| |
| /* Get optional system timestamp before query. */ |
| if (stime) |
| *stime = ktime_get(); |
| |
| if (use_scanline_counter) { |
| /* No obvious pixelcount register. Only query vertical |
| * scanout position from Display scan line register. |
| */ |
| position = __intel_get_crtc_scanline(crtc); |
| } else { |
| /* Have access to pixelcount since start of frame. |
| * We can split this into vertical and horizontal |
| * scanout position. |
| */ |
| position = (intel_de_read_fw(dev_priv, PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT; |
| |
| /* convert to pixel counts */ |
| vbl_start *= htotal; |
| vbl_end *= htotal; |
| vtotal *= htotal; |
| |
| /* |
| * In interlaced modes, the pixel counter counts all pixels, |
| * so one field will have htotal more pixels. In order to avoid |
| * the reported position from jumping backwards when the pixel |
| * counter is beyond the length of the shorter field, just |
| * clamp the position the length of the shorter field. This |
| * matches how the scanline counter based position works since |
| * the scanline counter doesn't count the two half lines. |
| */ |
| if (position >= vtotal) |
| position = vtotal - 1; |
| |
| /* |
| * Start of vblank interrupt is triggered at start of hsync, |
| * just prior to the first active line of vblank. However we |
| * consider lines to start at the leading edge of horizontal |
| * active. So, should we get here before we've crossed into |
| * the horizontal active of the first line in vblank, we would |
| * not set the DRM_SCANOUTPOS_INVBL flag. In order to fix that, |
| * always add htotal-hsync_start to the current pixel position. |
| */ |
| position = (position + htotal - hsync_start) % vtotal; |
| } |
| |
| /* Get optional system timestamp after query. */ |
| if (etime) |
| *etime = ktime_get(); |
| |
| /* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */ |
| |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| /* |
| * While in vblank, position will be negative |
| * counting up towards 0 at vbl_end. And outside |
| * vblank, position will be positive counting |
| * up since vbl_end. |
| */ |
| if (position >= vbl_start) |
| position -= vbl_end; |
| else |
| position += vtotal - vbl_end; |
| |
| if (use_scanline_counter) { |
| *vpos = position; |
| *hpos = 0; |
| } else { |
| *vpos = position / htotal; |
| *hpos = position - (*vpos * htotal); |
| } |
| |
| return true; |
| } |
| |
| bool intel_crtc_get_vblank_timestamp(struct drm_crtc *crtc, int *max_error, |
| ktime_t *vblank_time, bool in_vblank_irq) |
| { |
| return drm_crtc_vblank_helper_get_vblank_timestamp_internal( |
| crtc, max_error, vblank_time, in_vblank_irq, |
| i915_get_crtc_scanoutpos); |
| } |
| |
| int intel_get_crtc_scanline(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| unsigned long irqflags; |
| int position; |
| |
| spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); |
| position = __intel_get_crtc_scanline(crtc); |
| spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); |
| |
| return position; |
| } |
| |
| /** |
| * ivb_parity_work - Workqueue called when a parity error interrupt |
| * occurred. |
| * @work: workqueue struct |
| * |
| * Doesn't actually do anything except notify userspace. As a consequence of |
| * this event, userspace should try to remap the bad rows since statistically |
| * it is likely the same row is more likely to go bad again. |
| */ |
| static void ivb_parity_work(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, typeof(*dev_priv), l3_parity.error_work); |
| struct intel_gt *gt = &dev_priv->gt; |
| u32 error_status, row, bank, subbank; |
| char *parity_event[6]; |
| u32 misccpctl; |
| u8 slice = 0; |
| |
| /* We must turn off DOP level clock gating to access the L3 registers. |
| * In order to prevent a get/put style interface, acquire struct mutex |
| * any time we access those registers. |
| */ |
| mutex_lock(&dev_priv->drm.struct_mutex); |
| |
| /* If we've screwed up tracking, just let the interrupt fire again */ |
| if (drm_WARN_ON(&dev_priv->drm, !dev_priv->l3_parity.which_slice)) |
| goto out; |
| |
| misccpctl = I915_READ(GEN7_MISCCPCTL); |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE); |
| POSTING_READ(GEN7_MISCCPCTL); |
| |
| while ((slice = ffs(dev_priv->l3_parity.which_slice)) != 0) { |
| i915_reg_t reg; |
| |
| slice--; |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, |
| slice >= NUM_L3_SLICES(dev_priv))) |
| break; |
| |
| dev_priv->l3_parity.which_slice &= ~(1<<slice); |
| |
| reg = GEN7_L3CDERRST1(slice); |
| |
| error_status = I915_READ(reg); |
| row = GEN7_PARITY_ERROR_ROW(error_status); |
| bank = GEN7_PARITY_ERROR_BANK(error_status); |
| subbank = GEN7_PARITY_ERROR_SUBBANK(error_status); |
| |
| I915_WRITE(reg, GEN7_PARITY_ERROR_VALID | GEN7_L3CDERRST1_ENABLE); |
| POSTING_READ(reg); |
| |
| parity_event[0] = I915_L3_PARITY_UEVENT "=1"; |
| parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row); |
| parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank); |
| parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank); |
| parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice); |
| parity_event[5] = NULL; |
| |
| kobject_uevent_env(&dev_priv->drm.primary->kdev->kobj, |
| KOBJ_CHANGE, parity_event); |
| |
| DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n", |
| slice, row, bank, subbank); |
| |
| kfree(parity_event[4]); |
| kfree(parity_event[3]); |
| kfree(parity_event[2]); |
| kfree(parity_event[1]); |
| } |
| |
| I915_WRITE(GEN7_MISCCPCTL, misccpctl); |
| |
| out: |
| drm_WARN_ON(&dev_priv->drm, dev_priv->l3_parity.which_slice); |
| spin_lock_irq(>->irq_lock); |
| gen5_gt_enable_irq(gt, GT_PARITY_ERROR(dev_priv)); |
| spin_unlock_irq(>->irq_lock); |
| |
| mutex_unlock(&dev_priv->drm.struct_mutex); |
| } |
| |
| static bool gen11_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_C: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC1); |
| case HPD_PORT_D: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC2); |
| case HPD_PORT_E: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC3); |
| case HPD_PORT_F: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC4); |
| default: |
| return false; |
| } |
| } |
| |
| static bool gen12_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_D: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC1); |
| case HPD_PORT_E: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC2); |
| case HPD_PORT_F: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC3); |
| case HPD_PORT_G: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC4); |
| case HPD_PORT_H: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC5); |
| case HPD_PORT_I: |
| return val & GEN11_HOTPLUG_CTL_LONG_DETECT(PORT_TC6); |
| default: |
| return false; |
| } |
| } |
| |
| static bool bxt_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & PORTA_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool icp_ddi_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(PORT_A); |
| case HPD_PORT_B: |
| return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(PORT_B); |
| case HPD_PORT_C: |
| return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(PORT_C); |
| default: |
| return false; |
| } |
| } |
| |
| static bool icp_tc_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_C: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC1); |
| case HPD_PORT_D: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC2); |
| case HPD_PORT_E: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC3); |
| case HPD_PORT_F: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC4); |
| default: |
| return false; |
| } |
| } |
| |
| static bool tgp_tc_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_D: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC1); |
| case HPD_PORT_E: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC2); |
| case HPD_PORT_F: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC3); |
| case HPD_PORT_G: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC4); |
| case HPD_PORT_H: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC5); |
| case HPD_PORT_I: |
| return val & ICP_TC_HPD_LONG_DETECT(PORT_TC6); |
| default: |
| return false; |
| } |
| } |
| |
| static bool spt_port_hotplug2_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_E: |
| return val & PORTE_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool spt_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & PORTA_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_D: |
| return val & PORTD_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool ilk_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_A: |
| return val & DIGITAL_PORTA_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool pch_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_LONG_DETECT; |
| case HPD_PORT_D: |
| return val & PORTD_HOTPLUG_LONG_DETECT; |
| default: |
| return false; |
| } |
| } |
| |
| static bool i9xx_port_hotplug_long_detect(enum hpd_pin pin, u32 val) |
| { |
| switch (pin) { |
| case HPD_PORT_B: |
| return val & PORTB_HOTPLUG_INT_LONG_PULSE; |
| case HPD_PORT_C: |
| return val & PORTC_HOTPLUG_INT_LONG_PULSE; |
| case HPD_PORT_D: |
| return val & PORTD_HOTPLUG_INT_LONG_PULSE; |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * Get a bit mask of pins that have triggered, and which ones may be long. |
| * This can be called multiple times with the same masks to accumulate |
| * hotplug detection results from several registers. |
| * |
| * Note that the caller is expected to zero out the masks initially. |
| */ |
| static void intel_get_hpd_pins(struct drm_i915_private *dev_priv, |
| u32 *pin_mask, u32 *long_mask, |
| u32 hotplug_trigger, u32 dig_hotplug_reg, |
| const u32 hpd[HPD_NUM_PINS], |
| bool long_pulse_detect(enum hpd_pin pin, u32 val)) |
| { |
| enum hpd_pin pin; |
| |
| BUILD_BUG_ON(BITS_PER_TYPE(*pin_mask) < HPD_NUM_PINS); |
| |
| for_each_hpd_pin(pin) { |
| if ((hpd[pin] & hotplug_trigger) == 0) |
| continue; |
| |
| *pin_mask |= BIT(pin); |
| |
| if (long_pulse_detect(pin, dig_hotplug_reg)) |
| *long_mask |= BIT(pin); |
| } |
| |
| drm_dbg(&dev_priv->drm, |
| "hotplug event received, stat 0x%08x, dig 0x%08x, pins 0x%08x, long 0x%08x\n", |
| hotplug_trigger, dig_hotplug_reg, *pin_mask, *long_mask); |
| |
| } |
| |
| static void gmbus_irq_handler(struct drm_i915_private *dev_priv) |
| { |
| wake_up_all(&dev_priv->gmbus_wait_queue); |
| } |
| |
| static void dp_aux_irq_handler(struct drm_i915_private *dev_priv) |
| { |
| wake_up_all(&dev_priv->gmbus_wait_queue); |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| static void display_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| u32 crc0, u32 crc1, |
| u32 crc2, u32 crc3, |
| u32 crc4) |
| { |
| struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| struct intel_pipe_crc *pipe_crc = &crtc->pipe_crc; |
| u32 crcs[5] = { crc0, crc1, crc2, crc3, crc4 }; |
| |
| trace_intel_pipe_crc(crtc, crcs); |
| |
| spin_lock(&pipe_crc->lock); |
| /* |
| * For some not yet identified reason, the first CRC is |
| * bonkers. So let's just wait for the next vblank and read |
| * out the buggy result. |
| * |
| * On GEN8+ sometimes the second CRC is bonkers as well, so |
| * don't trust that one either. |
| */ |
| if (pipe_crc->skipped <= 0 || |
| (INTEL_GEN(dev_priv) >= 8 && pipe_crc->skipped == 1)) { |
| pipe_crc->skipped++; |
| spin_unlock(&pipe_crc->lock); |
| return; |
| } |
| spin_unlock(&pipe_crc->lock); |
| |
| drm_crtc_add_crc_entry(&crtc->base, true, |
| drm_crtc_accurate_vblank_count(&crtc->base), |
| crcs); |
| } |
| #else |
| static inline void |
| display_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe, |
| u32 crc0, u32 crc1, |
| u32 crc2, u32 crc3, |
| u32 crc4) {} |
| #endif |
| |
| |
| static void hsw_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| display_pipe_crc_irq_handler(dev_priv, pipe, |
| I915_READ(PIPE_CRC_RES_1_IVB(pipe)), |
| 0, 0, 0, 0); |
| } |
| |
| static void ivb_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| display_pipe_crc_irq_handler(dev_priv, pipe, |
| I915_READ(PIPE_CRC_RES_1_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_2_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_3_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_4_IVB(pipe)), |
| I915_READ(PIPE_CRC_RES_5_IVB(pipe))); |
| } |
| |
| static void i9xx_pipe_crc_irq_handler(struct drm_i915_private *dev_priv, |
| enum pipe pipe) |
| { |
| u32 res1, res2; |
| |
| if (INTEL_GEN(dev_priv) >= 3) |
| res1 = I915_READ(PIPE_CRC_RES_RES1_I915(pipe)); |
| else |
| res1 = 0; |
| |
| if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) |
| res2 = I915_READ(PIPE_CRC_RES_RES2_G4X(pipe)); |
| else |
| res2 = 0; |
| |
| display_pipe_crc_irq_handler(dev_priv, pipe, |
| I915_READ(PIPE_CRC_RES_RED(pipe)), |
| I915_READ(PIPE_CRC_RES_GREEN(pipe)), |
| I915_READ(PIPE_CRC_RES_BLUE(pipe)), |
| res1, res2); |
| } |
| |
| static void i9xx_pipestat_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| I915_WRITE(PIPESTAT(pipe), |
| PIPESTAT_INT_STATUS_MASK | |
| PIPE_FIFO_UNDERRUN_STATUS); |
| |
| dev_priv->pipestat_irq_mask[pipe] = 0; |
| } |
| } |
| |
| static void i9xx_pipestat_irq_ack(struct drm_i915_private *dev_priv, |
| u32 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| enum pipe pipe; |
| |
| spin_lock(&dev_priv->irq_lock); |
| |
| if (!dev_priv->display_irqs_enabled) { |
| spin_unlock(&dev_priv->irq_lock); |
| return; |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| i915_reg_t reg; |
| u32 status_mask, enable_mask, iir_bit = 0; |
| |
| /* |
| * PIPESTAT bits get signalled even when the interrupt is |
| * disabled with the mask bits, and some of the status bits do |
| * not generate interrupts at all (like the underrun bit). Hence |
| * we need to be careful that we only handle what we want to |
| * handle. |
| */ |
| |
| /* fifo underruns are filterered in the underrun handler. */ |
| status_mask = PIPE_FIFO_UNDERRUN_STATUS; |
| |
| switch (pipe) { |
| default: |
| case PIPE_A: |
| iir_bit = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; |
| break; |
| case PIPE_B: |
| iir_bit = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; |
| break; |
| case PIPE_C: |
| iir_bit = I915_DISPLAY_PIPE_C_EVENT_INTERRUPT; |
| break; |
| } |
| if (iir & iir_bit) |
| status_mask |= dev_priv->pipestat_irq_mask[pipe]; |
| |
| if (!status_mask) |
| continue; |
| |
| reg = PIPESTAT(pipe); |
| pipe_stats[pipe] = I915_READ(reg) & status_mask; |
| enable_mask = i915_pipestat_enable_mask(dev_priv, pipe); |
| |
| /* |
| * Clear the PIPE*STAT regs before the IIR |
| * |
| * Toggle the enable bits to make sure we get an |
| * edge in the ISR pipe event bit if we don't clear |
| * all the enabled status bits. Otherwise the edge |
| * triggered IIR on i965/g4x wouldn't notice that |
| * an interrupt is still pending. |
| */ |
| if (pipe_stats[pipe]) { |
| I915_WRITE(reg, pipe_stats[pipe]); |
| I915_WRITE(reg, enable_mask); |
| } |
| } |
| spin_unlock(&dev_priv->irq_lock); |
| } |
| |
| static void i8xx_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u16 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS) |
| intel_handle_vblank(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| } |
| |
| static void i915_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u32 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| bool blc_event = false; |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS) |
| intel_handle_vblank(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev_priv); |
| } |
| |
| static void i965_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u32 iir, u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| bool blc_event = false; |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS) |
| intel_handle_vblank(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS) |
| blc_event = true; |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (blc_event || (iir & I915_ASLE_INTERRUPT)) |
| intel_opregion_asle_intr(dev_priv); |
| |
| if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static void valleyview_pipestat_irq_handler(struct drm_i915_private *dev_priv, |
| u32 pipe_stats[I915_MAX_PIPES]) |
| { |
| enum pipe pipe; |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS) |
| intel_handle_vblank(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_CRC_DONE_INTERRUPT_STATUS) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| } |
| |
| if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_status = 0, hotplug_status_mask; |
| int i; |
| |
| if (IS_G4X(dev_priv) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| hotplug_status_mask = HOTPLUG_INT_STATUS_G4X | |
| DP_AUX_CHANNEL_MASK_INT_STATUS_G4X; |
| else |
| hotplug_status_mask = HOTPLUG_INT_STATUS_I915; |
| |
| /* |
| * We absolutely have to clear all the pending interrupt |
| * bits in PORT_HOTPLUG_STAT. Otherwise the ISR port |
| * interrupt bit won't have an edge, and the i965/g4x |
| * edge triggered IIR will not notice that an interrupt |
| * is still pending. We can't use PORT_HOTPLUG_EN to |
| * guarantee the edge as the act of toggling the enable |
| * bits can itself generate a new hotplug interrupt :( |
| */ |
| for (i = 0; i < 10; i++) { |
| u32 tmp = I915_READ(PORT_HOTPLUG_STAT) & hotplug_status_mask; |
| |
| if (tmp == 0) |
| return hotplug_status; |
| |
| hotplug_status |= tmp; |
| I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); |
| } |
| |
| drm_WARN_ONCE(&dev_priv->drm, 1, |
| "PORT_HOTPLUG_STAT did not clear (0x%08x)\n", |
| I915_READ(PORT_HOTPLUG_STAT)); |
| |
| return hotplug_status; |
| } |
| |
| static void i9xx_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_status) |
| { |
| u32 pin_mask = 0, long_mask = 0; |
| u32 hotplug_trigger; |
| |
| if (IS_G4X(dev_priv) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X; |
| else |
| hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915; |
| |
| if (hotplug_trigger) { |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, hotplug_trigger, |
| dev_priv->hotplug.hpd, |
| i9xx_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| if ((IS_G4X(dev_priv) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && |
| hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X) |
| dp_aux_irq_handler(dev_priv); |
| } |
| |
| static irqreturn_t valleyview_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *dev_priv = arg; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| do { |
| u32 iir, gt_iir, pm_iir; |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 hotplug_status = 0; |
| u32 ier = 0; |
| |
| gt_iir = I915_READ(GTIIR); |
| pm_iir = I915_READ(GEN6_PMIIR); |
| iir = I915_READ(VLV_IIR); |
| |
| if (gt_iir == 0 && pm_iir == 0 && iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* |
| * Theory on interrupt generation, based on empirical evidence: |
| * |
| * x = ((VLV_IIR & VLV_IER) || |
| * (((GT_IIR & GT_IER) || (GEN6_PMIIR & GEN6_PMIER)) && |
| * (VLV_MASTER_IER & MASTER_INTERRUPT_ENABLE))); |
| * |
| * A CPU interrupt will only be raised when 'x' has a 0->1 edge. |
| * Hence we clear MASTER_INTERRUPT_ENABLE and VLV_IER to |
| * guarantee the CPU interrupt will be raised again even if we |
| * don't end up clearing all the VLV_IIR, GT_IIR, GEN6_PMIIR |
| * bits this time around. |
| */ |
| I915_WRITE(VLV_MASTER_IER, 0); |
| ier = I915_READ(VLV_IER); |
| I915_WRITE(VLV_IER, 0); |
| |
| if (gt_iir) |
| I915_WRITE(GTIIR, gt_iir); |
| if (pm_iir) |
| I915_WRITE(GEN6_PMIIR, pm_iir); |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & (I915_LPE_PIPE_A_INTERRUPT | |
| I915_LPE_PIPE_B_INTERRUPT)) |
| intel_lpe_audio_irq_handler(dev_priv); |
| |
| /* |
| * VLV_IIR is single buffered, and reflects the level |
| * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. |
| */ |
| if (iir) |
| I915_WRITE(VLV_IIR, iir); |
| |
| I915_WRITE(VLV_IER, ier); |
| I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); |
| |
| if (gt_iir) |
| gen6_gt_irq_handler(&dev_priv->gt, gt_iir); |
| if (pm_iir) |
| gen6_rps_irq_handler(&dev_priv->gt.rps, pm_iir); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| valleyview_pipestat_irq_handler(dev_priv, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| return ret; |
| } |
| |
| static irqreturn_t cherryview_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *dev_priv = arg; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| do { |
| u32 master_ctl, iir; |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 hotplug_status = 0; |
| u32 ier = 0; |
| |
| master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL; |
| iir = I915_READ(VLV_IIR); |
| |
| if (master_ctl == 0 && iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* |
| * Theory on interrupt generation, based on empirical evidence: |
| * |
| * x = ((VLV_IIR & VLV_IER) || |
| * ((GEN8_MASTER_IRQ & ~GEN8_MASTER_IRQ_CONTROL) && |
| * (GEN8_MASTER_IRQ & GEN8_MASTER_IRQ_CONTROL))); |
| * |
| * A CPU interrupt will only be raised when 'x' has a 0->1 edge. |
| * Hence we clear GEN8_MASTER_IRQ_CONTROL and VLV_IER to |
| * guarantee the CPU interrupt will be raised again even if we |
| * don't end up clearing all the VLV_IIR and GEN8_MASTER_IRQ_CONTROL |
| * bits this time around. |
| */ |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| ier = I915_READ(VLV_IER); |
| I915_WRITE(VLV_IER, 0); |
| |
| gen8_gt_irq_handler(&dev_priv->gt, master_ctl); |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & (I915_LPE_PIPE_A_INTERRUPT | |
| I915_LPE_PIPE_B_INTERRUPT | |
| I915_LPE_PIPE_C_INTERRUPT)) |
| intel_lpe_audio_irq_handler(dev_priv); |
| |
| /* |
| * VLV_IIR is single buffered, and reflects the level |
| * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last. |
| */ |
| if (iir) |
| I915_WRITE(VLV_IIR, iir); |
| |
| I915_WRITE(VLV_IER, ier); |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| valleyview_pipestat_irq_handler(dev_priv, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| return ret; |
| } |
| |
| static void ibx_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_trigger) |
| { |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| /* |
| * Somehow the PCH doesn't seem to really ack the interrupt to the CPU |
| * unless we touch the hotplug register, even if hotplug_trigger is |
| * zero. Not acking leads to "The master control interrupt lied (SDE)!" |
| * errors. |
| */ |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| if (!hotplug_trigger) { |
| u32 mask = PORTA_HOTPLUG_STATUS_MASK | |
| PORTD_HOTPLUG_STATUS_MASK | |
| PORTC_HOTPLUG_STATUS_MASK | |
| PORTB_HOTPLUG_STATUS_MASK; |
| dig_hotplug_reg &= ~mask; |
| } |
| |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| if (!hotplug_trigger) |
| return; |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, dig_hotplug_reg, |
| dev_priv->hotplug.pch_hpd, |
| pch_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| static void ibx_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| enum pipe pipe; |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK; |
| |
| ibx_hpd_irq_handler(dev_priv, hotplug_trigger); |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK) { |
| int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK) >> |
| SDE_AUDIO_POWER_SHIFT); |
| drm_dbg(&dev_priv->drm, "PCH audio power change on port %d\n", |
| port_name(port)); |
| } |
| |
| if (pch_iir & SDE_AUX_MASK) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_GMBUS) |
| gmbus_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_AUDIO_HDCP_MASK) |
| drm_dbg(&dev_priv->drm, "PCH HDCP audio interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_TRANS_MASK) |
| drm_dbg(&dev_priv->drm, "PCH transcoder audio interrupt\n"); |
| |
| if (pch_iir & SDE_POISON) |
| drm_err(&dev_priv->drm, "PCH poison interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK) { |
| for_each_pipe(dev_priv, pipe) |
| drm_dbg(&dev_priv->drm, " pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| } |
| |
| if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE)) |
| drm_dbg(&dev_priv->drm, "PCH transcoder CRC done interrupt\n"); |
| |
| if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR)) |
| drm_dbg(&dev_priv->drm, |
| "PCH transcoder CRC error interrupt\n"); |
| |
| if (pch_iir & SDE_TRANSA_FIFO_UNDER) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, PIPE_A); |
| |
| if (pch_iir & SDE_TRANSB_FIFO_UNDER) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, PIPE_B); |
| } |
| |
| static void ivb_err_int_handler(struct drm_i915_private *dev_priv) |
| { |
| u32 err_int = I915_READ(GEN7_ERR_INT); |
| enum pipe pipe; |
| |
| if (err_int & ERR_INT_POISON) |
| drm_err(&dev_priv->drm, "Poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (err_int & ERR_INT_FIFO_UNDERRUN(pipe)) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| if (err_int & ERR_INT_PIPE_CRC_DONE(pipe)) { |
| if (IS_IVYBRIDGE(dev_priv)) |
| ivb_pipe_crc_irq_handler(dev_priv, pipe); |
| else |
| hsw_pipe_crc_irq_handler(dev_priv, pipe); |
| } |
| } |
| |
| I915_WRITE(GEN7_ERR_INT, err_int); |
| } |
| |
| static void cpt_serr_int_handler(struct drm_i915_private *dev_priv) |
| { |
| u32 serr_int = I915_READ(SERR_INT); |
| enum pipe pipe; |
| |
| if (serr_int & SERR_INT_POISON) |
| drm_err(&dev_priv->drm, "PCH poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) |
| if (serr_int & SERR_INT_TRANS_FIFO_UNDERRUN(pipe)) |
| intel_pch_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| I915_WRITE(SERR_INT, serr_int); |
| } |
| |
| static void cpt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| enum pipe pipe; |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_CPT; |
| |
| ibx_hpd_irq_handler(dev_priv, hotplug_trigger); |
| |
| if (pch_iir & SDE_AUDIO_POWER_MASK_CPT) { |
| int port = ffs((pch_iir & SDE_AUDIO_POWER_MASK_CPT) >> |
| SDE_AUDIO_POWER_SHIFT_CPT); |
| drm_dbg(&dev_priv->drm, "PCH audio power change on port %c\n", |
| port_name(port)); |
| } |
| |
| if (pch_iir & SDE_AUX_MASK_CPT) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_GMBUS_CPT) |
| gmbus_irq_handler(dev_priv); |
| |
| if (pch_iir & SDE_AUDIO_CP_REQ_CPT) |
| drm_dbg(&dev_priv->drm, "Audio CP request interrupt\n"); |
| |
| if (pch_iir & SDE_AUDIO_CP_CHG_CPT) |
| drm_dbg(&dev_priv->drm, "Audio CP change interrupt\n"); |
| |
| if (pch_iir & SDE_FDI_MASK_CPT) { |
| for_each_pipe(dev_priv, pipe) |
| drm_dbg(&dev_priv->drm, " pipe %c FDI IIR: 0x%08x\n", |
| pipe_name(pipe), |
| I915_READ(FDI_RX_IIR(pipe))); |
| } |
| |
| if (pch_iir & SDE_ERROR_CPT) |
| cpt_serr_int_handler(dev_priv); |
| } |
| |
| static void icp_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| u32 ddi_hotplug_trigger, tc_hotplug_trigger; |
| u32 pin_mask = 0, long_mask = 0; |
| bool (*tc_port_hotplug_long_detect)(enum hpd_pin pin, u32 val); |
| |
| if (HAS_PCH_TGP(dev_priv)) { |
| ddi_hotplug_trigger = pch_iir & SDE_DDI_MASK_TGP; |
| tc_hotplug_trigger = pch_iir & SDE_TC_MASK_TGP; |
| tc_port_hotplug_long_detect = tgp_tc_port_hotplug_long_detect; |
| } else if (HAS_PCH_JSP(dev_priv)) { |
| ddi_hotplug_trigger = pch_iir & SDE_DDI_MASK_TGP; |
| tc_hotplug_trigger = 0; |
| } else if (HAS_PCH_MCC(dev_priv)) { |
| ddi_hotplug_trigger = pch_iir & SDE_DDI_MASK_ICP; |
| tc_hotplug_trigger = pch_iir & SDE_TC_HOTPLUG_ICP(PORT_TC1); |
| tc_port_hotplug_long_detect = icp_tc_port_hotplug_long_detect; |
| } else { |
| drm_WARN(&dev_priv->drm, !HAS_PCH_ICP(dev_priv), |
| "Unrecognized PCH type 0x%x\n", |
| INTEL_PCH_TYPE(dev_priv)); |
| |
| ddi_hotplug_trigger = pch_iir & SDE_DDI_MASK_ICP; |
| tc_hotplug_trigger = pch_iir & SDE_TC_MASK_ICP; |
| tc_port_hotplug_long_detect = icp_tc_port_hotplug_long_detect; |
| } |
| |
| if (ddi_hotplug_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(SHOTPLUG_CTL_DDI); |
| I915_WRITE(SHOTPLUG_CTL_DDI, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| ddi_hotplug_trigger, dig_hotplug_reg, |
| dev_priv->hotplug.pch_hpd, |
| icp_ddi_port_hotplug_long_detect); |
| } |
| |
| if (tc_hotplug_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(SHOTPLUG_CTL_TC); |
| I915_WRITE(SHOTPLUG_CTL_TC, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| tc_hotplug_trigger, dig_hotplug_reg, |
| dev_priv->hotplug.pch_hpd, |
| tc_port_hotplug_long_detect); |
| } |
| |
| if (pin_mask) |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| |
| if (pch_iir & SDE_GMBUS_ICP) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static void spt_irq_handler(struct drm_i915_private *dev_priv, u32 pch_iir) |
| { |
| u32 hotplug_trigger = pch_iir & SDE_HOTPLUG_MASK_SPT & |
| ~SDE_PORTE_HOTPLUG_SPT; |
| u32 hotplug2_trigger = pch_iir & SDE_PORTE_HOTPLUG_SPT; |
| u32 pin_mask = 0, long_mask = 0; |
| |
| if (hotplug_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, dig_hotplug_reg, |
| dev_priv->hotplug.pch_hpd, |
| spt_port_hotplug_long_detect); |
| } |
| |
| if (hotplug2_trigger) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG2); |
| I915_WRITE(PCH_PORT_HOTPLUG2, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug2_trigger, dig_hotplug_reg, |
| dev_priv->hotplug.pch_hpd, |
| spt_port_hotplug2_long_detect); |
| } |
| |
| if (pin_mask) |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| |
| if (pch_iir & SDE_GMBUS_CPT) |
| gmbus_irq_handler(dev_priv); |
| } |
| |
| static void ilk_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_trigger) |
| { |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| dig_hotplug_reg = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL); |
| I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, dig_hotplug_reg, |
| dev_priv->hotplug.hpd, |
| ilk_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| static void ilk_display_irq_handler(struct drm_i915_private *dev_priv, |
| u32 de_iir) |
| { |
| enum pipe pipe; |
| u32 hotplug_trigger = de_iir & DE_DP_A_HOTPLUG; |
| |
| if (hotplug_trigger) |
| ilk_hpd_irq_handler(dev_priv, hotplug_trigger); |
| |
| if (de_iir & DE_AUX_CHANNEL_A) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (de_iir & DE_GSE) |
| intel_opregion_asle_intr(dev_priv); |
| |
| if (de_iir & DE_POISON) |
| drm_err(&dev_priv->drm, "Poison interrupt\n"); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (de_iir & DE_PIPE_VBLANK(pipe)) |
| intel_handle_vblank(dev_priv, pipe); |
| |
| if (de_iir & DE_PIPE_FIFO_UNDERRUN(pipe)) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| if (de_iir & DE_PIPE_CRC_DONE(pipe)) |
| i9xx_pipe_crc_irq_handler(dev_priv, pipe); |
| } |
| |
| /* check event from PCH */ |
| if (de_iir & DE_PCH_EVENT) { |
| u32 pch_iir = I915_READ(SDEIIR); |
| |
| if (HAS_PCH_CPT(dev_priv)) |
| cpt_irq_handler(dev_priv, pch_iir); |
| else |
| ibx_irq_handler(dev_priv, pch_iir); |
| |
| /* should clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| } |
| |
| if (IS_GEN(dev_priv, 5) && de_iir & DE_PCU_EVENT) |
| gen5_rps_irq_handler(&dev_priv->gt.rps); |
| } |
| |
| static void ivb_display_irq_handler(struct drm_i915_private *dev_priv, |
| u32 de_iir) |
| { |
| enum pipe pipe; |
| u32 hotplug_trigger = de_iir & DE_DP_A_HOTPLUG_IVB; |
| |
| if (hotplug_trigger) |
| ilk_hpd_irq_handler(dev_priv, hotplug_trigger); |
| |
| if (de_iir & DE_ERR_INT_IVB) |
| ivb_err_int_handler(dev_priv); |
| |
| if (de_iir & DE_EDP_PSR_INT_HSW) { |
| u32 psr_iir = I915_READ(EDP_PSR_IIR); |
| |
| intel_psr_irq_handler(dev_priv, psr_iir); |
| I915_WRITE(EDP_PSR_IIR, psr_iir); |
| } |
| |
| if (de_iir & DE_AUX_CHANNEL_A_IVB) |
| dp_aux_irq_handler(dev_priv); |
| |
| if (de_iir & DE_GSE_IVB) |
| intel_opregion_asle_intr(dev_priv); |
| |
| for_each_pipe(dev_priv, pipe) { |
| if (de_iir & (DE_PIPE_VBLANK_IVB(pipe))) |
| intel_handle_vblank(dev_priv, pipe); |
| } |
| |
| /* check event from PCH */ |
| if (!HAS_PCH_NOP(dev_priv) && (de_iir & DE_PCH_EVENT_IVB)) { |
| u32 pch_iir = I915_READ(SDEIIR); |
| |
| cpt_irq_handler(dev_priv, pch_iir); |
| |
| /* clear PCH hotplug event before clear CPU irq */ |
| I915_WRITE(SDEIIR, pch_iir); |
| } |
| } |
| |
| /* |
| * To handle irqs with the minimum potential races with fresh interrupts, we: |
| * 1 - Disable Master Interrupt Control. |
| * 2 - Find the source(s) of the interrupt. |
| * 3 - Clear the Interrupt Identity bits (IIR). |
| * 4 - Process the interrupt(s) that had bits set in the IIRs. |
| * 5 - Re-enable Master Interrupt Control. |
| */ |
| static irqreturn_t ilk_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *i915 = arg; |
| void __iomem * const regs = i915->uncore.regs; |
| u32 de_iir, gt_iir, de_ier, sde_ier = 0; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (unlikely(!intel_irqs_enabled(i915))) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(&i915->runtime_pm); |
| |
| /* disable master interrupt before clearing iir */ |
| de_ier = raw_reg_read(regs, DEIER); |
| raw_reg_write(regs, DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); |
| |
| /* Disable south interrupts. We'll only write to SDEIIR once, so further |
| * interrupts will will be stored on its back queue, and then we'll be |
| * able to process them after we restore SDEIER (as soon as we restore |
| * it, we'll get an interrupt if SDEIIR still has something to process |
| * due to its back queue). */ |
| if (!HAS_PCH_NOP(i915)) { |
| sde_ier = raw_reg_read(regs, SDEIER); |
| raw_reg_write(regs, SDEIER, 0); |
| } |
| |
| /* Find, clear, then process each source of interrupt */ |
| |
| gt_iir = raw_reg_read(regs, GTIIR); |
| if (gt_iir) { |
| raw_reg_write(regs, GTIIR, gt_iir); |
| if (INTEL_GEN(i915) >= 6) |
| gen6_gt_irq_handler(&i915->gt, gt_iir); |
| else |
| gen5_gt_irq_handler(&i915->gt, gt_iir); |
| ret = IRQ_HANDLED; |
| } |
| |
| de_iir = raw_reg_read(regs, DEIIR); |
| if (de_iir) { |
| raw_reg_write(regs, DEIIR, de_iir); |
| if (INTEL_GEN(i915) >= 7) |
| ivb_display_irq_handler(i915, de_iir); |
| else |
| ilk_display_irq_handler(i915, de_iir); |
| ret = IRQ_HANDLED; |
| } |
| |
| if (INTEL_GEN(i915) >= 6) { |
| u32 pm_iir = raw_reg_read(regs, GEN6_PMIIR); |
| if (pm_iir) { |
| raw_reg_write(regs, GEN6_PMIIR, pm_iir); |
| gen6_rps_irq_handler(&i915->gt.rps, pm_iir); |
| ret = IRQ_HANDLED; |
| } |
| } |
| |
| raw_reg_write(regs, DEIER, de_ier); |
| if (sde_ier) |
| raw_reg_write(regs, SDEIER, sde_ier); |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| enable_rpm_wakeref_asserts(&i915->runtime_pm); |
| |
| return ret; |
| } |
| |
| static void bxt_hpd_irq_handler(struct drm_i915_private *dev_priv, |
| u32 hotplug_trigger) |
| { |
| u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; |
| |
| dig_hotplug_reg = I915_READ(PCH_PORT_HOTPLUG); |
| I915_WRITE(PCH_PORT_HOTPLUG, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| hotplug_trigger, dig_hotplug_reg, |
| dev_priv->hotplug.hpd, |
| bxt_port_hotplug_long_detect); |
| |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| } |
| |
| static void gen11_hpd_irq_handler(struct drm_i915_private *dev_priv, u32 iir) |
| { |
| u32 pin_mask = 0, long_mask = 0; |
| u32 trigger_tc = iir & GEN11_DE_TC_HOTPLUG_MASK; |
| u32 trigger_tbt = iir & GEN11_DE_TBT_HOTPLUG_MASK; |
| long_pulse_detect_func long_pulse_detect; |
| |
| if (INTEL_GEN(dev_priv) >= 12) |
| long_pulse_detect = gen12_port_hotplug_long_detect; |
| else |
| long_pulse_detect = gen11_port_hotplug_long_detect; |
| |
| if (trigger_tc) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(GEN11_TC_HOTPLUG_CTL); |
| I915_WRITE(GEN11_TC_HOTPLUG_CTL, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| trigger_tc, dig_hotplug_reg, |
| dev_priv->hotplug.hpd, |
| long_pulse_detect); |
| } |
| |
| if (trigger_tbt) { |
| u32 dig_hotplug_reg; |
| |
| dig_hotplug_reg = I915_READ(GEN11_TBT_HOTPLUG_CTL); |
| I915_WRITE(GEN11_TBT_HOTPLUG_CTL, dig_hotplug_reg); |
| |
| intel_get_hpd_pins(dev_priv, &pin_mask, &long_mask, |
| trigger_tbt, dig_hotplug_reg, |
| dev_priv->hotplug.hpd, |
| long_pulse_detect); |
| } |
| |
| if (pin_mask) |
| intel_hpd_irq_handler(dev_priv, pin_mask, long_mask); |
| else |
| drm_err(&dev_priv->drm, |
| "Unexpected DE HPD interrupt 0x%08x\n", iir); |
| } |
| |
| static u32 gen8_de_port_aux_mask(struct drm_i915_private *dev_priv) |
| { |
| u32 mask; |
| |
| if (INTEL_GEN(dev_priv) >= 12) |
| return TGL_DE_PORT_AUX_DDIA | |
| TGL_DE_PORT_AUX_DDIB | |
| TGL_DE_PORT_AUX_DDIC | |
| TGL_DE_PORT_AUX_USBC1 | |
| TGL_DE_PORT_AUX_USBC2 | |
| TGL_DE_PORT_AUX_USBC3 | |
| TGL_DE_PORT_AUX_USBC4 | |
| TGL_DE_PORT_AUX_USBC5 | |
| TGL_DE_PORT_AUX_USBC6; |
| |
| |
| mask = GEN8_AUX_CHANNEL_A; |
| if (INTEL_GEN(dev_priv) >= 9) |
| mask |= GEN9_AUX_CHANNEL_B | |
| GEN9_AUX_CHANNEL_C | |
| GEN9_AUX_CHANNEL_D; |
| |
| if (IS_CNL_WITH_PORT_F(dev_priv) || IS_GEN(dev_priv, 11)) |
| mask |= CNL_AUX_CHANNEL_F; |
| |
| if (IS_GEN(dev_priv, 11)) |
| mask |= ICL_AUX_CHANNEL_E; |
| |
| return mask; |
| } |
| |
| static u32 gen8_de_pipe_fault_mask(struct drm_i915_private *dev_priv) |
| { |
| if (IS_ROCKETLAKE(dev_priv)) |
| return RKL_DE_PIPE_IRQ_FAULT_ERRORS; |
| else if (INTEL_GEN(dev_priv) >= 11) |
| return GEN11_DE_PIPE_IRQ_FAULT_ERRORS; |
| else if (INTEL_GEN(dev_priv) >= 9) |
| return GEN9_DE_PIPE_IRQ_FAULT_ERRORS; |
| else |
| return GEN8_DE_PIPE_IRQ_FAULT_ERRORS; |
| } |
| |
| static void |
| gen8_de_misc_irq_handler(struct drm_i915_private *dev_priv, u32 iir) |
| { |
| bool found = false; |
| |
| if (iir & GEN8_DE_MISC_GSE) { |
| intel_opregion_asle_intr(dev_priv); |
| found = true; |
| } |
| |
| if (iir & GEN8_DE_EDP_PSR) { |
| u32 psr_iir; |
| i915_reg_t iir_reg; |
| |
| if (INTEL_GEN(dev_priv) >= 12) |
| iir_reg = TRANS_PSR_IIR(dev_priv->psr.transcoder); |
| else |
| iir_reg = EDP_PSR_IIR; |
| |
| psr_iir = I915_READ(iir_reg); |
| I915_WRITE(iir_reg, psr_iir); |
| |
| if (psr_iir) |
| found = true; |
| |
| intel_psr_irq_handler(dev_priv, psr_iir); |
| } |
| |
| if (!found) |
| drm_err(&dev_priv->drm, "Unexpected DE Misc interrupt\n"); |
| } |
| |
| static irqreturn_t |
| gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl) |
| { |
| irqreturn_t ret = IRQ_NONE; |
| u32 iir; |
| enum pipe pipe; |
| |
| if (master_ctl & GEN8_DE_MISC_IRQ) { |
| iir = I915_READ(GEN8_DE_MISC_IIR); |
| if (iir) { |
| I915_WRITE(GEN8_DE_MISC_IIR, iir); |
| ret = IRQ_HANDLED; |
| gen8_de_misc_irq_handler(dev_priv, iir); |
| } else { |
| drm_err(&dev_priv->drm, |
| "The master control interrupt lied (DE MISC)!\n"); |
| } |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 11 && (master_ctl & GEN11_DE_HPD_IRQ)) { |
| iir = I915_READ(GEN11_DE_HPD_IIR); |
| if (iir) { |
| I915_WRITE(GEN11_DE_HPD_IIR, iir); |
| ret = IRQ_HANDLED; |
| gen11_hpd_irq_handler(dev_priv, iir); |
| } else { |
| drm_err(&dev_priv->drm, |
| "The master control interrupt lied, (DE HPD)!\n"); |
| } |
| } |
| |
| if (master_ctl & GEN8_DE_PORT_IRQ) { |
| iir = I915_READ(GEN8_DE_PORT_IIR); |
| if (iir) { |
| u32 tmp_mask; |
| bool found = false; |
| |
| I915_WRITE(GEN8_DE_PORT_IIR, iir); |
| ret = IRQ_HANDLED; |
| |
| if (iir & gen8_de_port_aux_mask(dev_priv)) { |
| dp_aux_irq_handler(dev_priv); |
| found = true; |
| } |
| |
| if (IS_GEN9_LP(dev_priv)) { |
| tmp_mask = iir & BXT_DE_PORT_HOTPLUG_MASK; |
| if (tmp_mask) { |
| bxt_hpd_irq_handler(dev_priv, tmp_mask); |
| found = true; |
| } |
| } else if (IS_BROADWELL(dev_priv)) { |
| tmp_mask = iir & GEN8_PORT_DP_A_HOTPLUG; |
| if (tmp_mask) { |
| ilk_hpd_irq_handler(dev_priv, tmp_mask); |
| found = true; |
| } |
| } |
| |
| if (IS_GEN9_LP(dev_priv) && (iir & BXT_DE_PORT_GMBUS)) { |
| gmbus_irq_handler(dev_priv); |
| found = true; |
| } |
| |
| if (!found) |
| drm_err(&dev_priv->drm, |
| "Unexpected DE Port interrupt\n"); |
| } |
| else |
| drm_err(&dev_priv->drm, |
| "The master control interrupt lied (DE PORT)!\n"); |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| u32 fault_errors; |
| |
| if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe))) |
| continue; |
| |
| iir = I915_READ(GEN8_DE_PIPE_IIR(pipe)); |
| if (!iir) { |
| drm_err(&dev_priv->drm, |
| "The master control interrupt lied (DE PIPE)!\n"); |
| continue; |
| } |
| |
| ret = IRQ_HANDLED; |
| I915_WRITE(GEN8_DE_PIPE_IIR(pipe), iir); |
| |
| if (iir & GEN8_PIPE_VBLANK) |
| intel_handle_vblank(dev_priv, pipe); |
| |
| if (iir & GEN8_PIPE_CDCLK_CRC_DONE) |
| hsw_pipe_crc_irq_handler(dev_priv, pipe); |
| |
| if (iir & GEN8_PIPE_FIFO_UNDERRUN) |
| intel_cpu_fifo_underrun_irq_handler(dev_priv, pipe); |
| |
| fault_errors = iir & gen8_de_pipe_fault_mask(dev_priv); |
| if (fault_errors) |
| drm_err(&dev_priv->drm, |
| "Fault errors on pipe %c: 0x%08x\n", |
| pipe_name(pipe), |
| fault_errors); |
| } |
| |
| if (HAS_PCH_SPLIT(dev_priv) && !HAS_PCH_NOP(dev_priv) && |
| master_ctl & GEN8_DE_PCH_IRQ) { |
| /* |
| * FIXME(BDW): Assume for now that the new interrupt handling |
| * scheme also closed the SDE interrupt handling race we've seen |
| * on older pch-split platforms. But this needs testing. |
| */ |
| iir = I915_READ(SDEIIR); |
| if (iir) { |
| I915_WRITE(SDEIIR, iir); |
| ret = IRQ_HANDLED; |
| |
| if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) |
| icp_irq_handler(dev_priv, iir); |
| else if (INTEL_PCH_TYPE(dev_priv) >= PCH_SPT) |
| spt_irq_handler(dev_priv, iir); |
| else |
| cpt_irq_handler(dev_priv, iir); |
| } else { |
| /* |
| * Like on previous PCH there seems to be something |
| * fishy going on with forwarding PCH interrupts. |
| */ |
| drm_dbg(&dev_priv->drm, |
| "The master control interrupt lied (SDE)!\n"); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static inline u32 gen8_master_intr_disable(void __iomem * const regs) |
| { |
| raw_reg_write(regs, GEN8_MASTER_IRQ, 0); |
| |
| /* |
| * Now with master disabled, get a sample of level indications |
| * for this interrupt. Indications will be cleared on related acks. |
| * New indications can and will light up during processing, |
| * and will generate new interrupt after enabling master. |
| */ |
| return raw_reg_read(regs, GEN8_MASTER_IRQ); |
| } |
| |
| static inline void gen8_master_intr_enable(void __iomem * const regs) |
| { |
| raw_reg_write(regs, GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| } |
| |
| static irqreturn_t gen8_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *dev_priv = arg; |
| void __iomem * const regs = dev_priv->uncore.regs; |
| u32 master_ctl; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| master_ctl = gen8_master_intr_disable(regs); |
| if (!master_ctl) { |
| gen8_master_intr_enable(regs); |
| return IRQ_NONE; |
| } |
| |
| /* Find, queue (onto bottom-halves), then clear each source */ |
| gen8_gt_irq_handler(&dev_priv->gt, master_ctl); |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| if (master_ctl & ~GEN8_GT_IRQS) { |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| gen8_de_irq_handler(dev_priv, master_ctl); |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| } |
| |
| gen8_master_intr_enable(regs); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static u32 |
| gen11_gu_misc_irq_ack(struct intel_gt *gt, const u32 master_ctl) |
| { |
| void __iomem * const regs = gt->uncore->regs; |
| u32 iir; |
| |
| if (!(master_ctl & GEN11_GU_MISC_IRQ)) |
| return 0; |
| |
| iir = raw_reg_read(regs, GEN11_GU_MISC_IIR); |
| if (likely(iir)) |
| raw_reg_write(regs, GEN11_GU_MISC_IIR, iir); |
| |
| return iir; |
| } |
| |
| static void |
| gen11_gu_misc_irq_handler(struct intel_gt *gt, const u32 iir) |
| { |
| if (iir & GEN11_GU_MISC_GSE) |
| intel_opregion_asle_intr(gt->i915); |
| } |
| |
| static inline u32 gen11_master_intr_disable(void __iomem * const regs) |
| { |
| raw_reg_write(regs, GEN11_GFX_MSTR_IRQ, 0); |
| |
| /* |
| * Now with master disabled, get a sample of level indications |
| * for this interrupt. Indications will be cleared on related acks. |
| * New indications can and will light up during processing, |
| * and will generate new interrupt after enabling master. |
| */ |
| return raw_reg_read(regs, GEN11_GFX_MSTR_IRQ); |
| } |
| |
| static inline void gen11_master_intr_enable(void __iomem * const regs) |
| { |
| raw_reg_write(regs, GEN11_GFX_MSTR_IRQ, GEN11_MASTER_IRQ); |
| } |
| |
| static void |
| gen11_display_irq_handler(struct drm_i915_private *i915) |
| { |
| void __iomem * const regs = i915->uncore.regs; |
| const u32 disp_ctl = raw_reg_read(regs, GEN11_DISPLAY_INT_CTL); |
| |
| disable_rpm_wakeref_asserts(&i915->runtime_pm); |
| /* |
| * GEN11_DISPLAY_INT_CTL has same format as GEN8_MASTER_IRQ |
| * for the display related bits. |
| */ |
| raw_reg_write(regs, GEN11_DISPLAY_INT_CTL, 0x0); |
| gen8_de_irq_handler(i915, disp_ctl); |
| raw_reg_write(regs, GEN11_DISPLAY_INT_CTL, |
| GEN11_DISPLAY_IRQ_ENABLE); |
| |
| enable_rpm_wakeref_asserts(&i915->runtime_pm); |
| } |
| |
| static __always_inline irqreturn_t |
| __gen11_irq_handler(struct drm_i915_private * const i915, |
| u32 (*intr_disable)(void __iomem * const regs), |
| void (*intr_enable)(void __iomem * const regs)) |
| { |
| void __iomem * const regs = i915->uncore.regs; |
| struct intel_gt *gt = &i915->gt; |
| u32 master_ctl; |
| u32 gu_misc_iir; |
| |
| if (!intel_irqs_enabled(i915)) |
| return IRQ_NONE; |
| |
| master_ctl = intr_disable(regs); |
| if (!master_ctl) { |
| intr_enable(regs); |
| return IRQ_NONE; |
| } |
| |
| /* Find, queue (onto bottom-halves), then clear each source */ |
| gen11_gt_irq_handler(gt, master_ctl); |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| if (master_ctl & GEN11_DISPLAY_IRQ) |
| gen11_display_irq_handler(i915); |
| |
| gu_misc_iir = gen11_gu_misc_irq_ack(gt, master_ctl); |
| |
| intr_enable(regs); |
| |
| gen11_gu_misc_irq_handler(gt, gu_misc_iir); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t gen11_irq_handler(int irq, void *arg) |
| { |
| return __gen11_irq_handler(arg, |
| gen11_master_intr_disable, |
| gen11_master_intr_enable); |
| } |
| |
| static u32 dg1_master_intr_disable_and_ack(void __iomem * const regs) |
| { |
| u32 val; |
| |
| /* First disable interrupts */ |
| raw_reg_write(regs, DG1_MSTR_UNIT_INTR, 0); |
| |
| /* Get the indication levels and ack the master unit */ |
| val = raw_reg_read(regs, DG1_MSTR_UNIT_INTR); |
| if (unlikely(!val)) |
| return 0; |
| |
| raw_reg_write(regs, DG1_MSTR_UNIT_INTR, val); |
| |
| /* |
| * Now with master disabled, get a sample of level indications |
| * for this interrupt and ack them right away - we keep GEN11_MASTER_IRQ |
| * out as this bit doesn't exist anymore for DG1 |
| */ |
| val = raw_reg_read(regs, GEN11_GFX_MSTR_IRQ) & ~GEN11_MASTER_IRQ; |
| if (unlikely(!val)) |
| return 0; |
| |
| raw_reg_write(regs, GEN11_GFX_MSTR_IRQ, val); |
| |
| return val; |
| } |
| |
| static inline void dg1_master_intr_enable(void __iomem * const regs) |
| { |
| raw_reg_write(regs, DG1_MSTR_UNIT_INTR, DG1_MSTR_IRQ); |
| } |
| |
| static irqreturn_t dg1_irq_handler(int irq, void *arg) |
| { |
| return __gen11_irq_handler(arg, |
| dg1_master_intr_disable_and_ack, |
| dg1_master_intr_enable); |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| int i8xx_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_enable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| int i915gm_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| |
| /* |
| * Vblank interrupts fail to wake the device up from C2+. |
| * Disabling render clock gating during C-states avoids |
| * the problem. There is a small power cost so we do this |
| * only when vblank interrupts are actually enabled. |
| */ |
| if (dev_priv->vblank_enabled++ == 0) |
| I915_WRITE(SCPD0, _MASKED_BIT_ENABLE(CSTATE_RENDER_CLOCK_GATE_DISABLE)); |
| |
| return i8xx_enable_vblank(crtc); |
| } |
| |
| int i965_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_enable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| int ilk_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| u32 bit = INTEL_GEN(dev_priv) >= 7 ? |
| DE_PIPE_VBLANK_IVB(pipe) : DE_PIPE_VBLANK(pipe); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ilk_enable_display_irq(dev_priv, bit); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| /* Even though there is no DMC, frame counter can get stuck when |
| * PSR is active as no frames are generated. |
| */ |
| if (HAS_PSR(dev_priv)) |
| drm_crtc_vblank_restore(crtc); |
| |
| return 0; |
| } |
| |
| int bdw_enable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| bdw_enable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| |
| /* Even if there is no DMC, frame counter can get stuck when |
| * PSR is active as no frames are generated, so check only for PSR. |
| */ |
| if (HAS_PSR(dev_priv)) |
| drm_crtc_vblank_restore(crtc); |
| |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| void i8xx_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, PIPE_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| void i915gm_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| |
| i8xx_disable_vblank(crtc); |
| |
| if (--dev_priv->vblank_enabled == 0) |
| I915_WRITE(SCPD0, _MASKED_BIT_DISABLE(CSTATE_RENDER_CLOCK_GATE_DISABLE)); |
| } |
| |
| void i965_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| i915_disable_pipestat(dev_priv, pipe, |
| PIPE_START_VBLANK_INTERRUPT_STATUS); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| void ilk_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| u32 bit = INTEL_GEN(dev_priv) >= 7 ? |
| DE_PIPE_VBLANK_IVB(pipe) : DE_PIPE_VBLANK(pipe); |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| ilk_disable_display_irq(dev_priv, bit); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| void bdw_disable_vblank(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->dev); |
| enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| bdw_disable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK); |
| spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| } |
| |
| static void ibx_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| if (HAS_PCH_NOP(dev_priv)) |
| return; |
| |
| GEN3_IRQ_RESET(uncore, SDE); |
| |
| if (HAS_PCH_CPT(dev_priv) || HAS_PCH_LPT(dev_priv)) |
| I915_WRITE(SERR_INT, 0xffffffff); |
| } |
| |
| /* |
| * SDEIER is also touched by the interrupt handler to work around missed PCH |
| * interrupts. Hence we can't update it after the interrupt handler is enabled - |
| * instead we unconditionally enable all PCH interrupt sources here, but then |
| * only unmask them as needed with SDEIMR. |
| * |
| * This function needs to be called before interrupts are enabled. |
| */ |
| static void ibx_irq_pre_postinstall(struct drm_i915_private *dev_priv) |
| { |
| if (HAS_PCH_NOP(dev_priv)) |
| return; |
| |
| drm_WARN_ON(&dev_priv->drm, I915_READ(SDEIER) != 0); |
| I915_WRITE(SDEIER, 0xffffffff); |
| POSTING_READ(SDEIER); |
| } |
| |
| static void vlv_display_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| intel_uncore_write(uncore, DPINVGTT, DPINVGTT_STATUS_MASK_CHV); |
| else |
| intel_uncore_write(uncore, DPINVGTT, DPINVGTT_STATUS_MASK); |
| |
| i915_hotplug_interrupt_update_locked(dev_priv, 0xffffffff, 0); |
| intel_uncore_write(uncore, PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| GEN3_IRQ_RESET(uncore, VLV_); |
| dev_priv->irq_mask = ~0u; |
| } |
| |
| static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| u32 pipestat_mask; |
| u32 enable_mask; |
| enum pipe pipe; |
| |
| pipestat_mask = PIPE_CRC_DONE_INTERRUPT_STATUS; |
| |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS); |
| for_each_pipe(dev_priv, pipe) |
| i915_enable_pipestat(dev_priv, pipe, pipestat_mask); |
| |
| enable_mask = I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_LPE_PIPE_A_INTERRUPT | |
| I915_LPE_PIPE_B_INTERRUPT; |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT | |
| I915_LPE_PIPE_C_INTERRUPT; |
| |
| drm_WARN_ON(&dev_priv->drm, dev_priv->irq_mask != ~0u); |
| |
| dev_priv->irq_mask = ~enable_mask; |
| |
| GEN3_IRQ_INIT(uncore, VLV_, dev_priv->irq_mask, enable_mask); |
| } |
| |
| /* drm_dma.h hooks |
| */ |
| static void ilk_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| GEN3_IRQ_RESET(uncore, DE); |
| if (IS_GEN(dev_priv, 7)) |
| intel_uncore_write(uncore, GEN7_ERR_INT, 0xffffffff); |
| |
| if (IS_HASWELL(dev_priv)) { |
| intel_uncore_write(uncore, EDP_PSR_IMR, 0xffffffff); |
| intel_uncore_write(uncore, EDP_PSR_IIR, 0xffffffff); |
| } |
| |
| gen5_gt_irq_reset(&dev_priv->gt); |
| |
| ibx_irq_reset(dev_priv); |
| } |
| |
| static void valleyview_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| I915_WRITE(VLV_MASTER_IER, 0); |
| POSTING_READ(VLV_MASTER_IER); |
| |
| gen5_gt_irq_reset(&dev_priv->gt); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static void gen8_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| enum pipe pipe; |
| |
| gen8_master_intr_disable(dev_priv->uncore.regs); |
| |
| gen8_gt_irq_reset(&dev_priv->gt); |
| |
| intel_uncore_write(uncore, EDP_PSR_IMR, 0xffffffff); |
| intel_uncore_write(uncore, EDP_PSR_IIR, 0xffffffff); |
| |
| for_each_pipe(dev_priv, pipe) |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_RESET_NDX(uncore, DE_PIPE, pipe); |
| |
| GEN3_IRQ_RESET(uncore, GEN8_DE_PORT_); |
| GEN3_IRQ_RESET(uncore, GEN8_DE_MISC_); |
| GEN3_IRQ_RESET(uncore, GEN8_PCU_); |
| |
| if (HAS_PCH_SPLIT(dev_priv)) |
| ibx_irq_reset(dev_priv); |
| } |
| |
| static void gen11_display_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| enum pipe pipe; |
| u32 trans_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | |
| BIT(TRANSCODER_C) | BIT(TRANSCODER_D); |
| |
| intel_uncore_write(uncore, GEN11_DISPLAY_INT_CTL, 0); |
| |
| if (INTEL_GEN(dev_priv) >= 12) { |
| enum transcoder trans; |
| |
| for_each_cpu_transcoder_masked(dev_priv, trans, trans_mask) { |
| enum intel_display_power_domain domain; |
| |
| domain = POWER_DOMAIN_TRANSCODER(trans); |
| if (!intel_display_power_is_enabled(dev_priv, domain)) |
| continue; |
| |
| intel_uncore_write(uncore, TRANS_PSR_IMR(trans), 0xffffffff); |
| intel_uncore_write(uncore, TRANS_PSR_IIR(trans), 0xffffffff); |
| } |
| } else { |
| intel_uncore_write(uncore, EDP_PSR_IMR, 0xffffffff); |
| intel_uncore_write(uncore, EDP_PSR_IIR, 0xffffffff); |
| } |
| |
| for_each_pipe(dev_priv, pipe) |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_RESET_NDX(uncore, DE_PIPE, pipe); |
| |
| GEN3_IRQ_RESET(uncore, GEN8_DE_PORT_); |
| GEN3_IRQ_RESET(uncore, GEN8_DE_MISC_); |
| GEN3_IRQ_RESET(uncore, GEN11_DE_HPD_); |
| |
| if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) |
| GEN3_IRQ_RESET(uncore, SDE); |
| |
| /* Wa_14010685332:icl,jsl,ehl,tgl,rkl */ |
| if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) { |
| intel_uncore_rmw(uncore, SOUTH_CHICKEN1, |
| SBCLK_RUN_REFCLK_DIS, SBCLK_RUN_REFCLK_DIS); |
| intel_uncore_rmw(uncore, SOUTH_CHICKEN1, |
| SBCLK_RUN_REFCLK_DIS, 0); |
| } |
| } |
| |
| static void gen11_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| if (HAS_MASTER_UNIT_IRQ(dev_priv)) |
| dg1_master_intr_disable_and_ack(dev_priv->uncore.regs); |
| else |
| gen11_master_intr_disable(dev_priv->uncore.regs); |
| |
| gen11_gt_irq_reset(&dev_priv->gt); |
| gen11_display_irq_reset(dev_priv); |
| |
| GEN3_IRQ_RESET(uncore, GEN11_GU_MISC_); |
| GEN3_IRQ_RESET(uncore, GEN8_PCU_); |
| } |
| |
| void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv, |
| u8 pipe_mask) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| u32 extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN; |
| enum pipe pipe; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| if (!intel_irqs_enabled(dev_priv)) { |
| spin_unlock_irq(&dev_priv->irq_lock); |
| return; |
| } |
| |
| for_each_pipe_masked(dev_priv, pipe, pipe_mask) |
| GEN8_IRQ_INIT_NDX(uncore, DE_PIPE, pipe, |
| dev_priv->de_irq_mask[pipe], |
| ~dev_priv->de_irq_mask[pipe] | extra_ier); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv, |
| u8 pipe_mask) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| enum pipe pipe; |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| |
| if (!intel_irqs_enabled(dev_priv)) { |
| spin_unlock_irq(&dev_priv->irq_lock); |
| return; |
| } |
| |
| for_each_pipe_masked(dev_priv, pipe, pipe_mask) |
| GEN8_IRQ_RESET_NDX(uncore, DE_PIPE, pipe); |
| |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| /* make sure we're done processing display irqs */ |
| intel_synchronize_irq(dev_priv); |
| } |
| |
| static void cherryview_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| I915_WRITE(GEN8_MASTER_IRQ, 0); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| |
| gen8_gt_irq_reset(&dev_priv->gt); |
| |
| GEN3_IRQ_RESET(uncore, GEN8_PCU_); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_reset(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static u32 intel_hpd_enabled_irqs(struct drm_i915_private *dev_priv, |
| const u32 hpd[HPD_NUM_PINS]) |
| { |
| struct intel_encoder *encoder; |
| u32 enabled_irqs = 0; |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) |
| if (dev_priv->hotplug.stats[encoder->hpd_pin].state == HPD_ENABLED) |
| enabled_irqs |= hpd[encoder->hpd_pin]; |
| |
| return enabled_irqs; |
| } |
| |
| static void ibx_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug; |
| |
| /* |
| * Enable digital hotplug on the PCH, and configure the DP short pulse |
| * duration to 2ms (which is the minimum in the Display Port spec). |
| * The pulse duration bits are reserved on LPT+. |
| */ |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug &= ~(PORTB_PULSE_DURATION_MASK | |
| PORTC_PULSE_DURATION_MASK | |
| PORTD_PULSE_DURATION_MASK); |
| hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms; |
| hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms; |
| hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms; |
| /* |
| * When CPU and PCH are on the same package, port A |
| * HPD must be enabled in both north and south. |
| */ |
| if (HAS_PCH_LPT_LP(dev_priv)) |
| hotplug |= PORTA_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| } |
| |
| static void ibx_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| if (HAS_PCH_IBX(dev_priv)) |
| hotplug_irqs = SDE_HOTPLUG_MASK; |
| else |
| hotplug_irqs = SDE_HOTPLUG_MASK_CPT; |
| |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.pch_hpd); |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| ibx_hpd_detection_setup(dev_priv); |
| } |
| |
| static void icp_hpd_detection_setup(struct drm_i915_private *dev_priv, |
| u32 ddi_hotplug_enable_mask, |
| u32 tc_hotplug_enable_mask) |
| { |
| u32 hotplug; |
| |
| hotplug = I915_READ(SHOTPLUG_CTL_DDI); |
| hotplug |= ddi_hotplug_enable_mask; |
| I915_WRITE(SHOTPLUG_CTL_DDI, hotplug); |
| |
| if (tc_hotplug_enable_mask) { |
| hotplug = I915_READ(SHOTPLUG_CTL_TC); |
| hotplug |= tc_hotplug_enable_mask; |
| I915_WRITE(SHOTPLUG_CTL_TC, hotplug); |
| } |
| } |
| |
| static void icp_hpd_irq_setup(struct drm_i915_private *dev_priv, |
| u32 sde_ddi_mask, u32 sde_tc_mask, |
| u32 ddi_enable_mask, u32 tc_enable_mask) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| hotplug_irqs = sde_ddi_mask | sde_tc_mask; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.pch_hpd); |
| |
| if (INTEL_PCH_TYPE(dev_priv) <= PCH_TGP) |
| I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ); |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| icp_hpd_detection_setup(dev_priv, ddi_enable_mask, tc_enable_mask); |
| } |
| |
| /* |
| * EHL doesn't need most of gen11_hpd_irq_setup, it's handling only the |
| * equivalent of SDE. |
| */ |
| static void mcc_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| icp_hpd_irq_setup(dev_priv, |
| SDE_DDI_MASK_ICP, SDE_TC_HOTPLUG_ICP(PORT_TC1), |
| ICP_DDI_HPD_ENABLE_MASK, ICP_TC_HPD_ENABLE(PORT_TC1)); |
| } |
| |
| /* |
| * JSP behaves exactly the same as MCC above except that port C is mapped to |
| * the DDI-C pins instead of the TC1 pins. This means we should follow TGP's |
| * masks & tables rather than ICP's masks & tables. |
| */ |
| static void jsp_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| icp_hpd_irq_setup(dev_priv, |
| SDE_DDI_MASK_TGP, 0, |
| TGP_DDI_HPD_ENABLE_MASK, 0); |
| } |
| |
| static void gen11_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug; |
| |
| hotplug = I915_READ(GEN11_TC_HOTPLUG_CTL); |
| hotplug |= GEN11_HOTPLUG_CTL_ENABLE(PORT_TC1) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC2) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC3) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC4); |
| I915_WRITE(GEN11_TC_HOTPLUG_CTL, hotplug); |
| |
| hotplug = I915_READ(GEN11_TBT_HOTPLUG_CTL); |
| hotplug |= GEN11_HOTPLUG_CTL_ENABLE(PORT_TC1) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC2) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC3) | |
| GEN11_HOTPLUG_CTL_ENABLE(PORT_TC4); |
| I915_WRITE(GEN11_TBT_HOTPLUG_CTL, hotplug); |
| } |
| |
| static void gen11_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| u32 val; |
| |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.hpd); |
| hotplug_irqs = GEN11_DE_TC_HOTPLUG_MASK | GEN11_DE_TBT_HOTPLUG_MASK; |
| |
| val = I915_READ(GEN11_DE_HPD_IMR); |
| val &= ~hotplug_irqs; |
| val |= ~enabled_irqs & hotplug_irqs; |
| I915_WRITE(GEN11_DE_HPD_IMR, val); |
| POSTING_READ(GEN11_DE_HPD_IMR); |
| |
| gen11_hpd_detection_setup(dev_priv); |
| |
| if (INTEL_PCH_TYPE(dev_priv) >= PCH_TGP) |
| icp_hpd_irq_setup(dev_priv, SDE_DDI_MASK_TGP, SDE_TC_MASK_TGP, |
| TGP_DDI_HPD_ENABLE_MASK, TGP_TC_HPD_ENABLE_MASK); |
| else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) |
| icp_hpd_irq_setup(dev_priv, SDE_DDI_MASK_ICP, SDE_TC_MASK_ICP, |
| ICP_DDI_HPD_ENABLE_MASK, ICP_TC_HPD_ENABLE_MASK); |
| } |
| |
| static void spt_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 val, hotplug; |
| |
| /* Display WA #1179 WaHardHangonHotPlug: cnp */ |
| if (HAS_PCH_CNP(dev_priv)) { |
| val = I915_READ(SOUTH_CHICKEN1); |
| val &= ~CHASSIS_CLK_REQ_DURATION_MASK; |
| val |= CHASSIS_CLK_REQ_DURATION(0xf); |
| I915_WRITE(SOUTH_CHICKEN1, val); |
| } |
| |
| /* Enable digital hotplug on the PCH */ |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug |= PORTA_HOTPLUG_ENABLE | |
| PORTB_HOTPLUG_ENABLE | |
| PORTC_HOTPLUG_ENABLE | |
| PORTD_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| |
| hotplug = I915_READ(PCH_PORT_HOTPLUG2); |
| hotplug |= PORTE_HOTPLUG_ENABLE; |
| I915_WRITE(PCH_PORT_HOTPLUG2, hotplug); |
| } |
| |
| static void spt_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP) |
| I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ); |
| |
| hotplug_irqs = SDE_HOTPLUG_MASK_SPT; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.pch_hpd); |
| |
| ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| spt_hpd_detection_setup(dev_priv); |
| } |
| |
| static void ilk_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug; |
| |
| /* |
| * Enable digital hotplug on the CPU, and configure the DP short pulse |
| * duration to 2ms (which is the minimum in the Display Port spec) |
| * The pulse duration bits are reserved on HSW+. |
| */ |
| hotplug = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL); |
| hotplug &= ~DIGITAL_PORTA_PULSE_DURATION_MASK; |
| hotplug |= DIGITAL_PORTA_HOTPLUG_ENABLE | |
| DIGITAL_PORTA_PULSE_DURATION_2ms; |
| I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, hotplug); |
| } |
| |
| static void ilk_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| if (INTEL_GEN(dev_priv) >= 8) { |
| hotplug_irqs = GEN8_PORT_DP_A_HOTPLUG; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.hpd); |
| |
| bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } else if (INTEL_GEN(dev_priv) >= 7) { |
| hotplug_irqs = DE_DP_A_HOTPLUG_IVB; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.hpd); |
| |
| ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } else { |
| hotplug_irqs = DE_DP_A_HOTPLUG; |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.hpd); |
| |
| ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| } |
| |
| ilk_hpd_detection_setup(dev_priv); |
| |
| ibx_hpd_irq_setup(dev_priv); |
| } |
| |
| static void __bxt_hpd_detection_setup(struct drm_i915_private *dev_priv, |
| u32 enabled_irqs) |
| { |
| u32 hotplug; |
| |
| hotplug = I915_READ(PCH_PORT_HOTPLUG); |
| hotplug |= PORTA_HOTPLUG_ENABLE | |
| PORTB_HOTPLUG_ENABLE | |
| PORTC_HOTPLUG_ENABLE; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "Invert bit setting: hp_ctl:%x hp_port:%x\n", |
| hotplug, enabled_irqs); |
| hotplug &= ~BXT_DDI_HPD_INVERT_MASK; |
| |
| /* |
| * For BXT invert bit has to be set based on AOB design |
| * for HPD detection logic, update it based on VBT fields. |
| */ |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIA) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_A)) |
| hotplug |= BXT_DDIA_HPD_INVERT; |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIB) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_B)) |
| hotplug |= BXT_DDIB_HPD_INVERT; |
| if ((enabled_irqs & BXT_DE_PORT_HP_DDIC) && |
| intel_bios_is_port_hpd_inverted(dev_priv, PORT_C)) |
| hotplug |= BXT_DDIC_HPD_INVERT; |
| |
| I915_WRITE(PCH_PORT_HOTPLUG, hotplug); |
| } |
| |
| static void bxt_hpd_detection_setup(struct drm_i915_private *dev_priv) |
| { |
| __bxt_hpd_detection_setup(dev_priv, BXT_DE_PORT_HOTPLUG_MASK); |
| } |
| |
| static void bxt_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_irqs, enabled_irqs; |
| |
| enabled_irqs = intel_hpd_enabled_irqs(dev_priv, dev_priv->hotplug.hpd); |
| hotplug_irqs = BXT_DE_PORT_HOTPLUG_MASK; |
| |
| bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs); |
| |
| __bxt_hpd_detection_setup(dev_priv, enabled_irqs); |
| } |
| |
| static void ibx_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| u32 mask; |
| |
| if (HAS_PCH_NOP(dev_priv)) |
| return; |
| |
| if (HAS_PCH_IBX(dev_priv)) |
| mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON; |
| else if (HAS_PCH_CPT(dev_priv) || HAS_PCH_LPT(dev_priv)) |
| mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; |
| else |
| mask = SDE_GMBUS_CPT; |
| |
| gen3_assert_iir_is_zero(&dev_priv->uncore, SDEIIR); |
| I915_WRITE(SDEIMR, ~mask); |
| |
| if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) || |
| HAS_PCH_LPT(dev_priv)) |
| ibx_hpd_detection_setup(dev_priv); |
| else |
| spt_hpd_detection_setup(dev_priv); |
| } |
| |
| static void ilk_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| u32 display_mask, extra_mask; |
| |
| if (INTEL_GEN(dev_priv) >= 7) { |
| display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | |
| DE_PCH_EVENT_IVB | DE_AUX_CHANNEL_A_IVB); |
| extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB | |
| DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB | |
| DE_DP_A_HOTPLUG_IVB); |
| } else { |
| display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT | |
| DE_AUX_CHANNEL_A | DE_PIPEB_CRC_DONE | |
| DE_PIPEA_CRC_DONE | DE_POISON); |
| extra_mask = (DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT | |
| DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN | |
| DE_DP_A_HOTPLUG); |
| } |
| |
| if (IS_HASWELL(dev_priv)) { |
| gen3_assert_iir_is_zero(uncore, EDP_PSR_IIR); |
| display_mask |= DE_EDP_PSR_INT_HSW; |
| } |
| |
| dev_priv->irq_mask = ~display_mask; |
| |
| ibx_irq_pre_postinstall(dev_priv); |
| |
| GEN3_IRQ_INIT(uncore, DE, dev_priv->irq_mask, |
| display_mask | extra_mask); |
| |
| gen5_gt_irq_postinstall(&dev_priv->gt); |
| |
| ilk_hpd_detection_setup(dev_priv); |
| |
| ibx_irq_postinstall(dev_priv); |
| |
| if (IS_IRONLAKE_M(dev_priv)) { |
| /* Enable PCU event interrupts |
| * |
| * spinlocking not required here for correctness since interrupt |
| * setup is guaranteed to run in single-threaded context. But we |
| * need it to make the assert_spin_locked happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| ilk_enable_display_irq(dev_priv, DE_PCU_EVENT); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| } |
| |
| void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv) |
| { |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (dev_priv->display_irqs_enabled) |
| return; |
| |
| dev_priv->display_irqs_enabled = true; |
| |
| if (intel_irqs_enabled(dev_priv)) { |
| vlv_display_irq_reset(dev_priv); |
| vlv_display_irq_postinstall(dev_priv); |
| } |
| } |
| |
| void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv) |
| { |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| if (!dev_priv->display_irqs_enabled) |
| return; |
| |
| dev_priv->display_irqs_enabled = false; |
| |
| if (intel_irqs_enabled(dev_priv)) |
| vlv_display_irq_reset(dev_priv); |
| } |
| |
| |
| static void valleyview_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| gen5_gt_irq_postinstall(&dev_priv->gt); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_postinstall(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE); |
| POSTING_READ(VLV_MASTER_IER); |
| } |
| |
| static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| u32 de_pipe_masked = gen8_de_pipe_fault_mask(dev_priv) | |
| GEN8_PIPE_CDCLK_CRC_DONE; |
| u32 de_pipe_enables; |
| u32 de_port_masked = gen8_de_port_aux_mask(dev_priv); |
| u32 de_port_enables; |
| u32 de_misc_masked = GEN8_DE_EDP_PSR; |
| u32 trans_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | |
| BIT(TRANSCODER_C) | BIT(TRANSCODER_D); |
| enum pipe pipe; |
| |
| if (INTEL_GEN(dev_priv) <= 10) |
| de_misc_masked |= GEN8_DE_MISC_GSE; |
| |
| if (IS_GEN9_LP(dev_priv)) |
| de_port_masked |= BXT_DE_PORT_GMBUS; |
| |
| de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK | |
| GEN8_PIPE_FIFO_UNDERRUN; |
| |
| de_port_enables = de_port_masked; |
| if (IS_GEN9_LP(dev_priv)) |
| de_port_enables |= BXT_DE_PORT_HOTPLUG_MASK; |
| else if (IS_BROADWELL(dev_priv)) |
| de_port_enables |= GEN8_PORT_DP_A_HOTPLUG; |
| |
| if (INTEL_GEN(dev_priv) >= 12) { |
| enum transcoder trans; |
| |
| for_each_cpu_transcoder_masked(dev_priv, trans, trans_mask) { |
| enum intel_display_power_domain domain; |
| |
| domain = POWER_DOMAIN_TRANSCODER(trans); |
| if (!intel_display_power_is_enabled(dev_priv, domain)) |
| continue; |
| |
| gen3_assert_iir_is_zero(uncore, TRANS_PSR_IIR(trans)); |
| } |
| } else { |
| gen3_assert_iir_is_zero(uncore, EDP_PSR_IIR); |
| } |
| |
| for_each_pipe(dev_priv, pipe) { |
| dev_priv->de_irq_mask[pipe] = ~de_pipe_masked; |
| |
| if (intel_display_power_is_enabled(dev_priv, |
| POWER_DOMAIN_PIPE(pipe))) |
| GEN8_IRQ_INIT_NDX(uncore, DE_PIPE, pipe, |
| dev_priv->de_irq_mask[pipe], |
| de_pipe_enables); |
| } |
| |
| GEN3_IRQ_INIT(uncore, GEN8_DE_PORT_, ~de_port_masked, de_port_enables); |
| GEN3_IRQ_INIT(uncore, GEN8_DE_MISC_, ~de_misc_masked, de_misc_masked); |
| |
| if (INTEL_GEN(dev_priv) >= 11) { |
| u32 de_hpd_masked = 0; |
| u32 de_hpd_enables = GEN11_DE_TC_HOTPLUG_MASK | |
| GEN11_DE_TBT_HOTPLUG_MASK; |
| |
| GEN3_IRQ_INIT(uncore, GEN11_DE_HPD_, ~de_hpd_masked, |
| de_hpd_enables); |
| gen11_hpd_detection_setup(dev_priv); |
| } else if (IS_GEN9_LP(dev_priv)) { |
| bxt_hpd_detection_setup(dev_priv); |
| } else if (IS_BROADWELL(dev_priv)) { |
| ilk_hpd_detection_setup(dev_priv); |
| } |
| } |
| |
| static void gen8_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| if (HAS_PCH_SPLIT(dev_priv)) |
| ibx_irq_pre_postinstall(dev_priv); |
| |
| gen8_gt_irq_postinstall(&dev_priv->gt); |
| gen8_de_irq_postinstall(dev_priv); |
| |
| if (HAS_PCH_SPLIT(dev_priv)) |
| ibx_irq_postinstall(dev_priv); |
| |
| gen8_master_intr_enable(dev_priv->uncore.regs); |
| } |
| |
| static void icp_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| u32 mask = SDE_GMBUS_ICP; |
| |
| drm_WARN_ON(&dev_priv->drm, I915_READ(SDEIER) != 0); |
| I915_WRITE(SDEIER, 0xffffffff); |
| POSTING_READ(SDEIER); |
| |
| gen3_assert_iir_is_zero(&dev_priv->uncore, SDEIIR); |
| I915_WRITE(SDEIMR, ~mask); |
| |
| if (HAS_PCH_TGP(dev_priv)) |
| icp_hpd_detection_setup(dev_priv, TGP_DDI_HPD_ENABLE_MASK, |
| TGP_TC_HPD_ENABLE_MASK); |
| else if (HAS_PCH_JSP(dev_priv)) |
| icp_hpd_detection_setup(dev_priv, TGP_DDI_HPD_ENABLE_MASK, 0); |
| else if (HAS_PCH_MCC(dev_priv)) |
| icp_hpd_detection_setup(dev_priv, ICP_DDI_HPD_ENABLE_MASK, |
| ICP_TC_HPD_ENABLE(PORT_TC1)); |
| else |
| icp_hpd_detection_setup(dev_priv, ICP_DDI_HPD_ENABLE_MASK, |
| ICP_TC_HPD_ENABLE_MASK); |
| } |
| |
| static void gen11_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| u32 gu_misc_masked = GEN11_GU_MISC_GSE; |
| |
| if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) |
| icp_irq_postinstall(dev_priv); |
| |
| gen11_gt_irq_postinstall(&dev_priv->gt); |
| gen8_de_irq_postinstall(dev_priv); |
| |
| GEN3_IRQ_INIT(uncore, GEN11_GU_MISC_, ~gu_misc_masked, gu_misc_masked); |
| |
| I915_WRITE(GEN11_DISPLAY_INT_CTL, GEN11_DISPLAY_IRQ_ENABLE); |
| |
| if (HAS_MASTER_UNIT_IRQ(dev_priv)) { |
| dg1_master_intr_enable(uncore->regs); |
| POSTING_READ(DG1_MSTR_UNIT_INTR); |
| } else { |
| gen11_master_intr_enable(uncore->regs); |
| POSTING_READ(GEN11_GFX_MSTR_IRQ); |
| } |
| } |
| |
| static void cherryview_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| gen8_gt_irq_postinstall(&dev_priv->gt); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display_irqs_enabled) |
| vlv_display_irq_postinstall(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| I915_WRITE(GEN8_MASTER_IRQ, GEN8_MASTER_IRQ_CONTROL); |
| POSTING_READ(GEN8_MASTER_IRQ); |
| } |
| |
| static void i8xx_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| GEN2_IRQ_RESET(uncore); |
| } |
| |
| static void i8xx_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| u16 enable_mask; |
| |
| intel_uncore_write16(uncore, |
| EMR, |
| ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT); |
| |
| enable_mask = |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| GEN2_IRQ_INIT(uncore, dev_priv->irq_mask, enable_mask); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| } |
| |
| static void i8xx_error_irq_ack(struct drm_i915_private *i915, |
| u16 *eir, u16 *eir_stuck) |
| { |
| struct intel_uncore *uncore = &i915->uncore; |
| u16 emr; |
| |
| *eir = intel_uncore_read16(uncore, EIR); |
| |
| if (*eir) |
| intel_uncore_write16(uncore, EIR, *eir); |
| |
| *eir_stuck = intel_uncore_read16(uncore, EIR); |
| if (*eir_stuck == 0) |
| return; |
| |
| /* |
| * Toggle all EMR bits to make sure we get an edge |
| * in the ISR master error bit if we don't clear |
| * all the EIR bits. Otherwise the edge triggered |
| * IIR on i965/g4x wouldn't notice that an interrupt |
| * is still pending. Also some EIR bits can't be |
| * cleared except by handling the underlying error |
| * (or by a GPU reset) so we mask any bit that |
| * remains set. |
| */ |
| emr = intel_uncore_read16(uncore, EMR); |
| intel_uncore_write16(uncore, EMR, 0xffff); |
| intel_uncore_write16(uncore, EMR, emr | *eir_stuck); |
| } |
| |
| static void i8xx_error_irq_handler(struct drm_i915_private *dev_priv, |
| u16 eir, u16 eir_stuck) |
| { |
| DRM_DEBUG("Master Error: EIR 0x%04x\n", eir); |
| |
| if (eir_stuck) |
| drm_dbg(&dev_priv->drm, "EIR stuck: 0x%04x, masked\n", |
| eir_stuck); |
| } |
| |
| static void i9xx_error_irq_ack(struct drm_i915_private *dev_priv, |
| u32 *eir, u32 *eir_stuck) |
| { |
| u32 emr; |
| |
| *eir = I915_READ(EIR); |
| |
| I915_WRITE(EIR, *eir); |
| |
| *eir_stuck = I915_READ(EIR); |
| if (*eir_stuck == 0) |
| return; |
| |
| /* |
| * Toggle all EMR bits to make sure we get an edge |
| * in the ISR master error bit if we don't clear |
| * all the EIR bits. Otherwise the edge triggered |
| * IIR on i965/g4x wouldn't notice that an interrupt |
| * is still pending. Also some EIR bits can't be |
| * cleared except by handling the underlying error |
| * (or by a GPU reset) so we mask any bit that |
| * remains set. |
| */ |
| emr = I915_READ(EMR); |
| I915_WRITE(EMR, 0xffffffff); |
| I915_WRITE(EMR, emr | *eir_stuck); |
| } |
| |
| static void i9xx_error_irq_handler(struct drm_i915_private *dev_priv, |
| u32 eir, u32 eir_stuck) |
| { |
| DRM_DEBUG("Master Error, EIR 0x%08x\n", eir); |
| |
| if (eir_stuck) |
| drm_dbg(&dev_priv->drm, "EIR stuck: 0x%08x, masked\n", |
| eir_stuck); |
| } |
| |
| static irqreturn_t i8xx_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *dev_priv = arg; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| do { |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u16 eir = 0, eir_stuck = 0; |
| u16 iir; |
| |
| iir = intel_uncore_read16(&dev_priv->uncore, GEN2_IIR); |
| if (iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i8xx_error_irq_ack(dev_priv, &eir, &eir_stuck); |
| |
| intel_uncore_write16(&dev_priv->uncore, GEN2_IIR, iir); |
| |
| if (iir & I915_USER_INTERRUPT) |
| intel_engine_signal_breadcrumbs(dev_priv->gt.engine[RCS0]); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i8xx_error_irq_handler(dev_priv, eir, eir_stuck); |
| |
| i8xx_pipestat_irq_handler(dev_priv, iir, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| return ret; |
| } |
| |
| static void i915_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| if (I915_HAS_HOTPLUG(dev_priv)) { |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| } |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| GEN3_IRQ_RESET(uncore, GEN2_); |
| } |
| |
| static void i915_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| u32 enable_mask; |
| |
| I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH)); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT); |
| |
| enable_mask = |
| I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| if (I915_HAS_HOTPLUG(dev_priv)) { |
| /* Enable in IER... */ |
| enable_mask |= I915_DISPLAY_PORT_INTERRUPT; |
| /* and unmask in IMR */ |
| dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT; |
| } |
| |
| GEN3_IRQ_INIT(uncore, GEN2_, dev_priv->irq_mask, enable_mask); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| i915_enable_asle_pipestat(dev_priv); |
| } |
| |
| static irqreturn_t i915_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *dev_priv = arg; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| do { |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 eir = 0, eir_stuck = 0; |
| u32 hotplug_status = 0; |
| u32 iir; |
| |
| iir = I915_READ(GEN2_IIR); |
| if (iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| if (I915_HAS_HOTPLUG(dev_priv) && |
| iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_ack(dev_priv, &eir, &eir_stuck); |
| |
| I915_WRITE(GEN2_IIR, iir); |
| |
| if (iir & I915_USER_INTERRUPT) |
| intel_engine_signal_breadcrumbs(dev_priv->gt.engine[RCS0]); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_handler(dev_priv, eir, eir_stuck); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| i915_pipestat_irq_handler(dev_priv, iir, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| return ret; |
| } |
| |
| static void i965_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| |
| i915_hotplug_interrupt_update(dev_priv, 0xffffffff, 0); |
| I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT)); |
| |
| i9xx_pipestat_irq_reset(dev_priv); |
| |
| GEN3_IRQ_RESET(uncore, GEN2_); |
| } |
| |
| static void i965_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| struct intel_uncore *uncore = &dev_priv->uncore; |
| u32 enable_mask; |
| u32 error_mask; |
| |
| /* |
| * Enable some error detection, note the instruction error mask |
| * bit is reserved, so we leave it masked. |
| */ |
| if (IS_G4X(dev_priv)) { |
| error_mask = ~(GM45_ERROR_PAGE_TABLE | |
| GM45_ERROR_MEM_PRIV | |
| GM45_ERROR_CP_PRIV | |
| I915_ERROR_MEMORY_REFRESH); |
| } else { |
| error_mask = ~(I915_ERROR_PAGE_TABLE | |
| I915_ERROR_MEMORY_REFRESH); |
| } |
| I915_WRITE(EMR, error_mask); |
| |
| /* Unmask the interrupts that we always want on. */ |
| dev_priv->irq_mask = |
| ~(I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT); |
| |
| enable_mask = |
| I915_ASLE_INTERRUPT | |
| I915_DISPLAY_PORT_INTERRUPT | |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | |
| I915_MASTER_ERROR_INTERRUPT | |
| I915_USER_INTERRUPT; |
| |
| if (IS_G4X(dev_priv)) |
| enable_mask |= I915_BSD_USER_INTERRUPT; |
| |
| GEN3_IRQ_INIT(uncore, GEN2_, dev_priv->irq_mask, enable_mask); |
| |
| /* Interrupt setup is already guaranteed to be single-threaded, this is |
| * just to make the assert_spin_locked check happy. */ |
| spin_lock_irq(&dev_priv->irq_lock); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| i915_enable_asle_pipestat(dev_priv); |
| } |
| |
| static void i915_hpd_irq_setup(struct drm_i915_private *dev_priv) |
| { |
| u32 hotplug_en; |
| |
| lockdep_assert_held(&dev_priv->irq_lock); |
| |
| /* Note HDMI and DP share hotplug bits */ |
| /* enable bits are the same for all generations */ |
| hotplug_en = intel_hpd_enabled_irqs(dev_priv, hpd_mask_i915); |
| /* Programming the CRT detection parameters tends |
| to generate a spurious hotplug event about three |
| seconds later. So just do it once. |
| */ |
| if (IS_G4X(dev_priv)) |
| hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; |
| hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; |
| |
| /* Ignore TV since it's buggy */ |
| i915_hotplug_interrupt_update_locked(dev_priv, |
| HOTPLUG_INT_EN_MASK | |
| CRT_HOTPLUG_VOLTAGE_COMPARE_MASK | |
| CRT_HOTPLUG_ACTIVATION_PERIOD_64, |
| hotplug_en); |
| } |
| |
| static irqreturn_t i965_irq_handler(int irq, void *arg) |
| { |
| struct drm_i915_private *dev_priv = arg; |
| irqreturn_t ret = IRQ_NONE; |
| |
| if (!intel_irqs_enabled(dev_priv)) |
| return IRQ_NONE; |
| |
| /* IRQs are synced during runtime_suspend, we don't require a wakeref */ |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| do { |
| u32 pipe_stats[I915_MAX_PIPES] = {}; |
| u32 eir = 0, eir_stuck = 0; |
| u32 hotplug_status = 0; |
| u32 iir; |
| |
| iir = I915_READ(GEN2_IIR); |
| if (iir == 0) |
| break; |
| |
| ret = IRQ_HANDLED; |
| |
| if (iir & I915_DISPLAY_PORT_INTERRUPT) |
| hotplug_status = i9xx_hpd_irq_ack(dev_priv); |
| |
| /* Call regardless, as some status bits might not be |
| * signalled in iir */ |
| i9xx_pipestat_irq_ack(dev_priv, iir, pipe_stats); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_ack(dev_priv, &eir, &eir_stuck); |
| |
| I915_WRITE(GEN2_IIR, iir); |
| |
| if (iir & I915_USER_INTERRUPT) |
| intel_engine_signal_breadcrumbs(dev_priv->gt.engine[RCS0]); |
| |
| if (iir & I915_BSD_USER_INTERRUPT) |
| intel_engine_signal_breadcrumbs(dev_priv->gt.engine[VCS0]); |
| |
| if (iir & I915_MASTER_ERROR_INTERRUPT) |
| i9xx_error_irq_handler(dev_priv, eir, eir_stuck); |
| |
| if (hotplug_status) |
| i9xx_hpd_irq_handler(dev_priv, hotplug_status); |
| |
| i965_pipestat_irq_handler(dev_priv, iir, pipe_stats); |
| } while (0); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| return ret; |
| } |
| |
| /** |
| * intel_irq_init - initializes irq support |
| * @dev_priv: i915 device instance |
| * |
| * This function initializes all the irq support including work items, timers |
| * and all the vtables. It does not setup the interrupt itself though. |
| */ |
| void intel_irq_init(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| int i; |
| |
| intel_hpd_init_pins(dev_priv); |
| |
| intel_hpd_init_work(dev_priv); |
| |
| INIT_WORK(&dev_priv->l3_parity.error_work, ivb_parity_work); |
| for (i = 0; i < MAX_L3_SLICES; ++i) |
| dev_priv->l3_parity.remap_info[i] = NULL; |
| |
| /* pre-gen11 the guc irqs bits are in the upper 16 bits of the pm reg */ |
| if (HAS_GT_UC(dev_priv) && INTEL_GEN(dev_priv) < 11) |
| dev_priv->gt.pm_guc_events = GUC_INTR_GUC2HOST << 16; |
| |
| dev->vblank_disable_immediate = true; |
| |
| /* Most platforms treat the display irq block as an always-on |
| * power domain. vlv/chv can disable it at runtime and need |
| * special care to avoid writing any of the display block registers |
| * outside of the power domain. We defer setting up the display irqs |
| * in this case to the runtime pm. |
| */ |
| dev_priv->display_irqs_enabled = true; |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| dev_priv->display_irqs_enabled = false; |
| |
| dev_priv->hotplug.hpd_storm_threshold = HPD_STORM_DEFAULT_THRESHOLD; |
| /* If we have MST support, we want to avoid doing short HPD IRQ storm |
| * detection, as short HPD storms will occur as a natural part of |
| * sideband messaging with MST. |
| * On older platforms however, IRQ storms can occur with both long and |
| * short pulses, as seen on some G4x systems. |
| */ |
| dev_priv->hotplug.hpd_short_storm_enabled = !HAS_DP_MST(dev_priv); |
| |
| if (HAS_GMCH(dev_priv)) { |
| if (I915_HAS_HOTPLUG(dev_priv)) |
| dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup; |
| } else { |
| if (HAS_PCH_JSP(dev_priv)) |
| dev_priv->display.hpd_irq_setup = jsp_hpd_irq_setup; |
| else if (HAS_PCH_MCC(dev_priv)) |
| dev_priv->display.hpd_irq_setup = mcc_hpd_irq_setup; |
| else if (INTEL_GEN(dev_priv) >= 11) |
| dev_priv->display.hpd_irq_setup = gen11_hpd_irq_setup; |
| else if (IS_GEN9_LP(dev_priv)) |
| dev_priv->display.hpd_irq_setup = bxt_hpd_irq_setup; |
| else if (INTEL_PCH_TYPE(dev_priv) >= PCH_SPT) |
| dev_priv->display.hpd_irq_setup = spt_hpd_irq_setup; |
| else |
| dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup; |
| } |
| } |
| |
| /** |
| * intel_irq_fini - deinitializes IRQ support |
| * @i915: i915 device instance |
| * |
| * This function deinitializes all the IRQ support. |
| */ |
| void intel_irq_fini(struct drm_i915_private *i915) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_L3_SLICES; ++i) |
| kfree(i915->l3_parity.remap_info[i]); |
| } |
| |
| static irq_handler_t intel_irq_handler(struct drm_i915_private *dev_priv) |
| { |
| if (HAS_GMCH(dev_priv)) { |
| if (IS_CHERRYVIEW(dev_priv)) |
| return cherryview_irq_handler; |
| else if (IS_VALLEYVIEW(dev_priv)) |
| return valleyview_irq_handler; |
| else if (IS_GEN(dev_priv, 4)) |
| return i965_irq_handler; |
| else if (IS_GEN(dev_priv, 3)) |
| return i915_irq_handler; |
| else |
| return i8xx_irq_handler; |
| } else { |
| if (HAS_MASTER_UNIT_IRQ(dev_priv)) |
| return dg1_irq_handler; |
| if (INTEL_GEN(dev_priv) >= 11) |
| return gen11_irq_handler; |
| else if (INTEL_GEN(dev_priv) >= 8) |
| return gen8_irq_handler; |
| else |
| return ilk_irq_handler; |
| } |
| } |
| |
| static void intel_irq_reset(struct drm_i915_private *dev_priv) |
| { |
| if (HAS_GMCH(dev_priv)) { |
| if (IS_CHERRYVIEW(dev_priv)) |
| cherryview_irq_reset(dev_priv); |
| else if (IS_VALLEYVIEW(dev_priv)) |
| valleyview_irq_reset(dev_priv); |
| else if (IS_GEN(dev_priv, 4)) |
| i965_irq_reset(dev_priv); |
| else if (IS_GEN(dev_priv, 3)) |
| i915_irq_reset(dev_priv); |
| else |
| i8xx_irq_reset(dev_priv); |
| } else { |
| if (INTEL_GEN(dev_priv) >= 11) |
| gen11_irq_reset(dev_priv); |
| else if (INTEL_GEN(dev_priv) >= 8) |
| gen8_irq_reset(dev_priv); |
| else |
| ilk_irq_reset(dev_priv); |
| } |
| } |
| |
| static void intel_irq_postinstall(struct drm_i915_private *dev_priv) |
| { |
| if (HAS_GMCH(dev_priv)) { |
| if (IS_CHERRYVIEW(dev_priv)) |
| cherryview_irq_postinstall(dev_priv); |
| else if (IS_VALLEYVIEW(dev_priv)) |
| valleyview_irq_postinstall(dev_priv); |
| else if (IS_GEN(dev_priv, 4)) |
| i965_irq_postinstall(dev_priv); |
| else if (IS_GEN(dev_priv, 3)) |
| i915_irq_postinstall(dev_priv); |
| else |
| i8xx_irq_postinstall(dev_priv); |
| } else { |
| if (INTEL_GEN(dev_priv) >= 11) |
| gen11_irq_postinstall(dev_priv); |
| else if (INTEL_GEN(dev_priv) >= 8) |
| gen8_irq_postinstall(dev_priv); |
| else |
| ilk_irq_postinstall(dev_priv); |
| } |
| } |
| |
| /** |
| * intel_irq_install - enables the hardware interrupt |
| * @dev_priv: i915 device instance |
| * |
| * This function enables the hardware interrupt handling, but leaves the hotplug |
| * handling still disabled. It is called after intel_irq_init(). |
| * |
| * In the driver load and resume code we need working interrupts in a few places |
| * but don't want to deal with the hassle of concurrent probe and hotplug |
| * workers. Hence the split into this two-stage approach. |
| */ |
| int intel_irq_install(struct drm_i915_private *dev_priv) |
| { |
| int irq = dev_priv->drm.pdev->irq; |
| int ret; |
| |
| /* |
| * We enable some interrupt sources in our postinstall hooks, so mark |
| * interrupts as enabled _before_ actually enabling them to avoid |
| * special cases in our ordering checks. |
| */ |
| dev_priv->runtime_pm.irqs_enabled = true; |
| |
| dev_priv->drm.irq_enabled = true; |
| |
| intel_irq_reset(dev_priv); |
| |
| ret = request_irq(irq, intel_irq_handler(dev_priv), |
| IRQF_SHARED, DRIVER_NAME, dev_priv); |
| if (ret < 0) { |
| dev_priv->drm.irq_enabled = false; |
| return ret; |
| } |
| |
| intel_irq_postinstall(dev_priv); |
| |
| return ret; |
| } |
| |
| /** |
| * intel_irq_uninstall - finilizes all irq handling |
| * @dev_priv: i915 device instance |
| * |
| * This stops interrupt and hotplug handling and unregisters and frees all |
| * resources acquired in the init functions. |
| */ |
| void intel_irq_uninstall(struct drm_i915_private *dev_priv) |
| { |
| int irq = dev_priv->drm.pdev->irq; |
| |
| /* |
| * FIXME we can get called twice during driver probe |
| * error handling as well as during driver remove due to |
| * intel_modeset_driver_remove() calling us out of sequence. |
| * Would be nice if it didn't do that... |
| */ |
| if (!dev_priv->drm.irq_enabled) |
| return; |
| |
| dev_priv->drm.irq_enabled = false; |
| |
| intel_irq_reset(dev_priv); |
| |
| free_irq(irq, dev_priv); |
| |
| intel_hpd_cancel_work(dev_priv); |
| dev_priv->runtime_pm.irqs_enabled = false; |
| } |
| |
| /** |
| * intel_runtime_pm_disable_interrupts - runtime interrupt disabling |
| * @dev_priv: i915 device instance |
| * |
| * This function is used to disable interrupts at runtime, both in the runtime |
| * pm and the system suspend/resume code. |
| */ |
| void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv) |
| { |
| intel_irq_reset(dev_priv); |
| dev_priv->runtime_pm.irqs_enabled = false; |
| intel_synchronize_irq(dev_priv); |
| } |
| |
| /** |
| * intel_runtime_pm_enable_interrupts - runtime interrupt enabling |
| * @dev_priv: i915 device instance |
| * |
| * This function is used to enable interrupts at runtime, both in the runtime |
| * pm and the system suspend/resume code. |
| */ |
| void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv) |
| { |
| dev_priv->runtime_pm.irqs_enabled = true; |
| intel_irq_reset(dev_priv); |
| intel_irq_postinstall(dev_priv); |
| } |
| |
| bool intel_irqs_enabled(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * We only use drm_irq_uninstall() at unload and VT switch, so |
| * this is the only thing we need to check. |
| */ |
| return dev_priv->runtime_pm.irqs_enabled; |
| } |
| |
| void intel_synchronize_irq(struct drm_i915_private *i915) |
| { |
| synchronize_irq(i915->drm.pdev->irq); |
| } |