|  | /* | 
|  | BlueZ - Bluetooth protocol stack for Linux | 
|  | Copyright (C) 2000-2001 Qualcomm Incorporated | 
|  | Copyright (C) 2011 ProFUSION Embedded Systems | 
|  |  | 
|  | Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License version 2 as | 
|  | published by the Free Software Foundation; | 
|  |  | 
|  | THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS | 
|  | OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
|  | FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. | 
|  | IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY | 
|  | CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES | 
|  | WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  |  | 
|  | ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, | 
|  | COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS | 
|  | SOFTWARE IS DISCLAIMED. | 
|  | */ | 
|  |  | 
|  | /* Bluetooth HCI core. */ | 
|  |  | 
|  | #include <linux/export.h> | 
|  | #include <linux/idr.h> | 
|  | #include <linux/rfkill.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/crypto.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  | #include <net/bluetooth/l2cap.h> | 
|  | #include <net/bluetooth/mgmt.h> | 
|  |  | 
|  | #include "hci_request.h" | 
|  | #include "hci_debugfs.h" | 
|  | #include "smp.h" | 
|  | #include "leds.h" | 
|  |  | 
|  | static void hci_rx_work(struct work_struct *work); | 
|  | static void hci_cmd_work(struct work_struct *work); | 
|  | static void hci_tx_work(struct work_struct *work); | 
|  |  | 
|  | /* HCI device list */ | 
|  | LIST_HEAD(hci_dev_list); | 
|  | DEFINE_RWLOCK(hci_dev_list_lock); | 
|  |  | 
|  | /* HCI callback list */ | 
|  | LIST_HEAD(hci_cb_list); | 
|  | DEFINE_MUTEX(hci_cb_list_lock); | 
|  |  | 
|  | /* HCI ID Numbering */ | 
|  | static DEFINE_IDA(hci_index_ida); | 
|  |  | 
|  | /* ---- HCI debugfs entries ---- */ | 
|  |  | 
|  | static ssize_t dut_mode_read(struct file *file, char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct hci_dev *hdev = file->private_data; | 
|  | char buf[3]; | 
|  |  | 
|  | buf[0] = hci_dev_test_flag(hdev, HCI_DUT_MODE) ? 'Y' : 'N'; | 
|  | buf[1] = '\n'; | 
|  | buf[2] = '\0'; | 
|  | return simple_read_from_buffer(user_buf, count, ppos, buf, 2); | 
|  | } | 
|  |  | 
|  | static ssize_t dut_mode_write(struct file *file, const char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct hci_dev *hdev = file->private_data; | 
|  | struct sk_buff *skb; | 
|  | char buf[32]; | 
|  | size_t buf_size = min(count, (sizeof(buf)-1)); | 
|  | bool enable; | 
|  |  | 
|  | if (!test_bit(HCI_UP, &hdev->flags)) | 
|  | return -ENETDOWN; | 
|  |  | 
|  | if (copy_from_user(buf, user_buf, buf_size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | buf[buf_size] = '\0'; | 
|  | if (strtobool(buf, &enable)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (enable == hci_dev_test_flag(hdev, HCI_DUT_MODE)) | 
|  | return -EALREADY; | 
|  |  | 
|  | hci_req_sync_lock(hdev); | 
|  | if (enable) | 
|  | skb = __hci_cmd_sync(hdev, HCI_OP_ENABLE_DUT_MODE, 0, NULL, | 
|  | HCI_CMD_TIMEOUT); | 
|  | else | 
|  | skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, | 
|  | HCI_CMD_TIMEOUT); | 
|  | hci_req_sync_unlock(hdev); | 
|  |  | 
|  | if (IS_ERR(skb)) | 
|  | return PTR_ERR(skb); | 
|  |  | 
|  | kfree_skb(skb); | 
|  |  | 
|  | hci_dev_change_flag(hdev, HCI_DUT_MODE); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static const struct file_operations dut_mode_fops = { | 
|  | .open		= simple_open, | 
|  | .read		= dut_mode_read, | 
|  | .write		= dut_mode_write, | 
|  | .llseek		= default_llseek, | 
|  | }; | 
|  |  | 
|  | static ssize_t vendor_diag_read(struct file *file, char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct hci_dev *hdev = file->private_data; | 
|  | char buf[3]; | 
|  |  | 
|  | buf[0] = hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) ? 'Y' : 'N'; | 
|  | buf[1] = '\n'; | 
|  | buf[2] = '\0'; | 
|  | return simple_read_from_buffer(user_buf, count, ppos, buf, 2); | 
|  | } | 
|  |  | 
|  | static ssize_t vendor_diag_write(struct file *file, const char __user *user_buf, | 
|  | size_t count, loff_t *ppos) | 
|  | { | 
|  | struct hci_dev *hdev = file->private_data; | 
|  | char buf[32]; | 
|  | size_t buf_size = min(count, (sizeof(buf)-1)); | 
|  | bool enable; | 
|  | int err; | 
|  |  | 
|  | if (copy_from_user(buf, user_buf, buf_size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | buf[buf_size] = '\0'; | 
|  | if (strtobool(buf, &enable)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* When the diagnostic flags are not persistent and the transport | 
|  | * is not active, then there is no need for the vendor callback. | 
|  | * | 
|  | * Instead just store the desired value. If needed the setting | 
|  | * will be programmed when the controller gets powered on. | 
|  | */ | 
|  | if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && | 
|  | !test_bit(HCI_RUNNING, &hdev->flags)) | 
|  | goto done; | 
|  |  | 
|  | hci_req_sync_lock(hdev); | 
|  | err = hdev->set_diag(hdev, enable); | 
|  | hci_req_sync_unlock(hdev); | 
|  |  | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | done: | 
|  | if (enable) | 
|  | hci_dev_set_flag(hdev, HCI_VENDOR_DIAG); | 
|  | else | 
|  | hci_dev_clear_flag(hdev, HCI_VENDOR_DIAG); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static const struct file_operations vendor_diag_fops = { | 
|  | .open		= simple_open, | 
|  | .read		= vendor_diag_read, | 
|  | .write		= vendor_diag_write, | 
|  | .llseek		= default_llseek, | 
|  | }; | 
|  |  | 
|  | static void hci_debugfs_create_basic(struct hci_dev *hdev) | 
|  | { | 
|  | debugfs_create_file("dut_mode", 0644, hdev->debugfs, hdev, | 
|  | &dut_mode_fops); | 
|  |  | 
|  | if (hdev->set_diag) | 
|  | debugfs_create_file("vendor_diag", 0644, hdev->debugfs, hdev, | 
|  | &vendor_diag_fops); | 
|  | } | 
|  |  | 
|  | static int hci_reset_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | BT_DBG("%s %ld", req->hdev->name, opt); | 
|  |  | 
|  | /* Reset device */ | 
|  | set_bit(HCI_RESET, &req->hdev->flags); | 
|  | hci_req_add(req, HCI_OP_RESET, 0, NULL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bredr_init(struct hci_request *req) | 
|  | { | 
|  | req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_PACKET_BASED; | 
|  |  | 
|  | /* Read Local Supported Features */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); | 
|  |  | 
|  | /* Read Local Version */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); | 
|  |  | 
|  | /* Read BD Address */ | 
|  | hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); | 
|  | } | 
|  |  | 
|  | static void amp_init1(struct hci_request *req) | 
|  | { | 
|  | req->hdev->flow_ctl_mode = HCI_FLOW_CTL_MODE_BLOCK_BASED; | 
|  |  | 
|  | /* Read Local Version */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); | 
|  |  | 
|  | /* Read Local Supported Commands */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); | 
|  |  | 
|  | /* Read Local AMP Info */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL); | 
|  |  | 
|  | /* Read Data Blk size */ | 
|  | hci_req_add(req, HCI_OP_READ_DATA_BLOCK_SIZE, 0, NULL); | 
|  |  | 
|  | /* Read Flow Control Mode */ | 
|  | hci_req_add(req, HCI_OP_READ_FLOW_CONTROL_MODE, 0, NULL); | 
|  |  | 
|  | /* Read Location Data */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCATION_DATA, 0, NULL); | 
|  | } | 
|  |  | 
|  | static int amp_init2(struct hci_request *req) | 
|  | { | 
|  | /* Read Local Supported Features. Not all AMP controllers | 
|  | * support this so it's placed conditionally in the second | 
|  | * stage init. | 
|  | */ | 
|  | if (req->hdev->commands[14] & 0x20) | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hci_init1_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  |  | 
|  | BT_DBG("%s %ld", hdev->name, opt); | 
|  |  | 
|  | /* Reset */ | 
|  | if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) | 
|  | hci_reset_req(req, 0); | 
|  |  | 
|  | switch (hdev->dev_type) { | 
|  | case HCI_PRIMARY: | 
|  | bredr_init(req); | 
|  | break; | 
|  | case HCI_AMP: | 
|  | amp_init1(req); | 
|  | break; | 
|  | default: | 
|  | BT_ERR("Unknown device type %d", hdev->dev_type); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bredr_setup(struct hci_request *req) | 
|  | { | 
|  | __le16 param; | 
|  | __u8 flt_type; | 
|  |  | 
|  | /* Read Buffer Size (ACL mtu, max pkt, etc.) */ | 
|  | hci_req_add(req, HCI_OP_READ_BUFFER_SIZE, 0, NULL); | 
|  |  | 
|  | /* Read Class of Device */ | 
|  | hci_req_add(req, HCI_OP_READ_CLASS_OF_DEV, 0, NULL); | 
|  |  | 
|  | /* Read Local Name */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_NAME, 0, NULL); | 
|  |  | 
|  | /* Read Voice Setting */ | 
|  | hci_req_add(req, HCI_OP_READ_VOICE_SETTING, 0, NULL); | 
|  |  | 
|  | /* Read Number of Supported IAC */ | 
|  | hci_req_add(req, HCI_OP_READ_NUM_SUPPORTED_IAC, 0, NULL); | 
|  |  | 
|  | /* Read Current IAC LAP */ | 
|  | hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL); | 
|  |  | 
|  | /* Clear Event Filters */ | 
|  | flt_type = HCI_FLT_CLEAR_ALL; | 
|  | hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); | 
|  |  | 
|  | /* Connection accept timeout ~20 secs */ | 
|  | param = cpu_to_le16(0x7d00); | 
|  | hci_req_add(req, HCI_OP_WRITE_CA_TIMEOUT, 2, ¶m); | 
|  | } | 
|  |  | 
|  | static void le_setup(struct hci_request *req) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  |  | 
|  | /* Read LE Buffer Size */ | 
|  | hci_req_add(req, HCI_OP_LE_READ_BUFFER_SIZE, 0, NULL); | 
|  |  | 
|  | /* Read LE Local Supported Features */ | 
|  | hci_req_add(req, HCI_OP_LE_READ_LOCAL_FEATURES, 0, NULL); | 
|  |  | 
|  | /* Read LE Supported States */ | 
|  | hci_req_add(req, HCI_OP_LE_READ_SUPPORTED_STATES, 0, NULL); | 
|  |  | 
|  | /* LE-only controllers have LE implicitly enabled */ | 
|  | if (!lmp_bredr_capable(hdev)) | 
|  | hci_dev_set_flag(hdev, HCI_LE_ENABLED); | 
|  | } | 
|  |  | 
|  | static void hci_setup_event_mask(struct hci_request *req) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  |  | 
|  | /* The second byte is 0xff instead of 0x9f (two reserved bits | 
|  | * disabled) since a Broadcom 1.2 dongle doesn't respond to the | 
|  | * command otherwise. | 
|  | */ | 
|  | u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; | 
|  |  | 
|  | /* CSR 1.1 dongles does not accept any bitfield so don't try to set | 
|  | * any event mask for pre 1.2 devices. | 
|  | */ | 
|  | if (hdev->hci_ver < BLUETOOTH_VER_1_2) | 
|  | return; | 
|  |  | 
|  | if (lmp_bredr_capable(hdev)) { | 
|  | events[4] |= 0x01; /* Flow Specification Complete */ | 
|  | } else { | 
|  | /* Use a different default for LE-only devices */ | 
|  | memset(events, 0, sizeof(events)); | 
|  | events[1] |= 0x20; /* Command Complete */ | 
|  | events[1] |= 0x40; /* Command Status */ | 
|  | events[1] |= 0x80; /* Hardware Error */ | 
|  |  | 
|  | /* If the controller supports the Disconnect command, enable | 
|  | * the corresponding event. In addition enable packet flow | 
|  | * control related events. | 
|  | */ | 
|  | if (hdev->commands[0] & 0x20) { | 
|  | events[0] |= 0x10; /* Disconnection Complete */ | 
|  | events[2] |= 0x04; /* Number of Completed Packets */ | 
|  | events[3] |= 0x02; /* Data Buffer Overflow */ | 
|  | } | 
|  |  | 
|  | /* If the controller supports the Read Remote Version | 
|  | * Information command, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->commands[2] & 0x80) | 
|  | events[1] |= 0x08; /* Read Remote Version Information | 
|  | * Complete | 
|  | */ | 
|  |  | 
|  | if (hdev->le_features[0] & HCI_LE_ENCRYPTION) { | 
|  | events[0] |= 0x80; /* Encryption Change */ | 
|  | events[5] |= 0x80; /* Encryption Key Refresh Complete */ | 
|  | } | 
|  | } | 
|  |  | 
|  | if (lmp_inq_rssi_capable(hdev) || | 
|  | test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) | 
|  | events[4] |= 0x02; /* Inquiry Result with RSSI */ | 
|  |  | 
|  | if (lmp_ext_feat_capable(hdev)) | 
|  | events[4] |= 0x04; /* Read Remote Extended Features Complete */ | 
|  |  | 
|  | if (lmp_esco_capable(hdev)) { | 
|  | events[5] |= 0x08; /* Synchronous Connection Complete */ | 
|  | events[5] |= 0x10; /* Synchronous Connection Changed */ | 
|  | } | 
|  |  | 
|  | if (lmp_sniffsubr_capable(hdev)) | 
|  | events[5] |= 0x20; /* Sniff Subrating */ | 
|  |  | 
|  | if (lmp_pause_enc_capable(hdev)) | 
|  | events[5] |= 0x80; /* Encryption Key Refresh Complete */ | 
|  |  | 
|  | if (lmp_ext_inq_capable(hdev)) | 
|  | events[5] |= 0x40; /* Extended Inquiry Result */ | 
|  |  | 
|  | if (lmp_no_flush_capable(hdev)) | 
|  | events[7] |= 0x01; /* Enhanced Flush Complete */ | 
|  |  | 
|  | if (lmp_lsto_capable(hdev)) | 
|  | events[6] |= 0x80; /* Link Supervision Timeout Changed */ | 
|  |  | 
|  | if (lmp_ssp_capable(hdev)) { | 
|  | events[6] |= 0x01;	/* IO Capability Request */ | 
|  | events[6] |= 0x02;	/* IO Capability Response */ | 
|  | events[6] |= 0x04;	/* User Confirmation Request */ | 
|  | events[6] |= 0x08;	/* User Passkey Request */ | 
|  | events[6] |= 0x10;	/* Remote OOB Data Request */ | 
|  | events[6] |= 0x20;	/* Simple Pairing Complete */ | 
|  | events[7] |= 0x04;	/* User Passkey Notification */ | 
|  | events[7] |= 0x08;	/* Keypress Notification */ | 
|  | events[7] |= 0x10;	/* Remote Host Supported | 
|  | * Features Notification | 
|  | */ | 
|  | } | 
|  |  | 
|  | if (lmp_le_capable(hdev)) | 
|  | events[7] |= 0x20;	/* LE Meta-Event */ | 
|  |  | 
|  | hci_req_add(req, HCI_OP_SET_EVENT_MASK, sizeof(events), events); | 
|  | } | 
|  |  | 
|  | static int hci_init2_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  |  | 
|  | if (hdev->dev_type == HCI_AMP) | 
|  | return amp_init2(req); | 
|  |  | 
|  | if (lmp_bredr_capable(hdev)) | 
|  | bredr_setup(req); | 
|  | else | 
|  | hci_dev_clear_flag(hdev, HCI_BREDR_ENABLED); | 
|  |  | 
|  | if (lmp_le_capable(hdev)) | 
|  | le_setup(req); | 
|  |  | 
|  | /* All Bluetooth 1.2 and later controllers should support the | 
|  | * HCI command for reading the local supported commands. | 
|  | * | 
|  | * Unfortunately some controllers indicate Bluetooth 1.2 support, | 
|  | * but do not have support for this command. If that is the case, | 
|  | * the driver can quirk the behavior and skip reading the local | 
|  | * supported commands. | 
|  | */ | 
|  | if (hdev->hci_ver > BLUETOOTH_VER_1_1 && | 
|  | !test_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks)) | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL); | 
|  |  | 
|  | if (lmp_ssp_capable(hdev)) { | 
|  | /* When SSP is available, then the host features page | 
|  | * should also be available as well. However some | 
|  | * controllers list the max_page as 0 as long as SSP | 
|  | * has not been enabled. To achieve proper debugging | 
|  | * output, force the minimum max_page to 1 at least. | 
|  | */ | 
|  | hdev->max_page = 0x01; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) { | 
|  | u8 mode = 0x01; | 
|  |  | 
|  | hci_req_add(req, HCI_OP_WRITE_SSP_MODE, | 
|  | sizeof(mode), &mode); | 
|  | } else { | 
|  | struct hci_cp_write_eir cp; | 
|  |  | 
|  | memset(hdev->eir, 0, sizeof(hdev->eir)); | 
|  | memset(&cp, 0, sizeof(cp)); | 
|  |  | 
|  | hci_req_add(req, HCI_OP_WRITE_EIR, sizeof(cp), &cp); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (lmp_inq_rssi_capable(hdev) || | 
|  | test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) { | 
|  | u8 mode; | 
|  |  | 
|  | /* If Extended Inquiry Result events are supported, then | 
|  | * they are clearly preferred over Inquiry Result with RSSI | 
|  | * events. | 
|  | */ | 
|  | mode = lmp_ext_inq_capable(hdev) ? 0x02 : 0x01; | 
|  |  | 
|  | hci_req_add(req, HCI_OP_WRITE_INQUIRY_MODE, 1, &mode); | 
|  | } | 
|  |  | 
|  | if (lmp_inq_tx_pwr_capable(hdev)) | 
|  | hci_req_add(req, HCI_OP_READ_INQ_RSP_TX_POWER, 0, NULL); | 
|  |  | 
|  | if (lmp_ext_feat_capable(hdev)) { | 
|  | struct hci_cp_read_local_ext_features cp; | 
|  |  | 
|  | cp.page = 0x01; | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, | 
|  | sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_LINK_SECURITY)) { | 
|  | u8 enable = 1; | 
|  | hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, sizeof(enable), | 
|  | &enable); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void hci_setup_link_policy(struct hci_request *req) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  | struct hci_cp_write_def_link_policy cp; | 
|  | u16 link_policy = 0; | 
|  |  | 
|  | if (lmp_rswitch_capable(hdev)) | 
|  | link_policy |= HCI_LP_RSWITCH; | 
|  | if (lmp_hold_capable(hdev)) | 
|  | link_policy |= HCI_LP_HOLD; | 
|  | if (lmp_sniff_capable(hdev)) | 
|  | link_policy |= HCI_LP_SNIFF; | 
|  | if (lmp_park_capable(hdev)) | 
|  | link_policy |= HCI_LP_PARK; | 
|  |  | 
|  | cp.policy = cpu_to_le16(link_policy); | 
|  | hci_req_add(req, HCI_OP_WRITE_DEF_LINK_POLICY, sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | static void hci_set_le_support(struct hci_request *req) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  | struct hci_cp_write_le_host_supported cp; | 
|  |  | 
|  | /* LE-only devices do not support explicit enablement */ | 
|  | if (!lmp_bredr_capable(hdev)) | 
|  | return; | 
|  |  | 
|  | memset(&cp, 0, sizeof(cp)); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) { | 
|  | cp.le = 0x01; | 
|  | cp.simul = 0x00; | 
|  | } | 
|  |  | 
|  | if (cp.le != lmp_host_le_capable(hdev)) | 
|  | hci_req_add(req, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(cp), | 
|  | &cp); | 
|  | } | 
|  |  | 
|  | static void hci_set_event_mask_page_2(struct hci_request *req) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  | u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; | 
|  |  | 
|  | /* If Connectionless Slave Broadcast master role is supported | 
|  | * enable all necessary events for it. | 
|  | */ | 
|  | if (lmp_csb_master_capable(hdev)) { | 
|  | events[1] |= 0x40;	/* Triggered Clock Capture */ | 
|  | events[1] |= 0x80;	/* Synchronization Train Complete */ | 
|  | events[2] |= 0x10;	/* Slave Page Response Timeout */ | 
|  | events[2] |= 0x20;	/* CSB Channel Map Change */ | 
|  | } | 
|  |  | 
|  | /* If Connectionless Slave Broadcast slave role is supported | 
|  | * enable all necessary events for it. | 
|  | */ | 
|  | if (lmp_csb_slave_capable(hdev)) { | 
|  | events[2] |= 0x01;	/* Synchronization Train Received */ | 
|  | events[2] |= 0x02;	/* CSB Receive */ | 
|  | events[2] |= 0x04;	/* CSB Timeout */ | 
|  | events[2] |= 0x08;	/* Truncated Page Complete */ | 
|  | } | 
|  |  | 
|  | /* Enable Authenticated Payload Timeout Expired event if supported */ | 
|  | if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) | 
|  | events[2] |= 0x80; | 
|  |  | 
|  | hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events); | 
|  | } | 
|  |  | 
|  | static int hci_init3_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  | u8 p; | 
|  |  | 
|  | hci_setup_event_mask(req); | 
|  |  | 
|  | if (hdev->commands[6] & 0x20 && | 
|  | !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { | 
|  | struct hci_cp_read_stored_link_key cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, BDADDR_ANY); | 
|  | cp.read_all = 0x01; | 
|  | hci_req_add(req, HCI_OP_READ_STORED_LINK_KEY, sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | if (hdev->commands[5] & 0x10) | 
|  | hci_setup_link_policy(req); | 
|  |  | 
|  | if (hdev->commands[8] & 0x01) | 
|  | hci_req_add(req, HCI_OP_READ_PAGE_SCAN_ACTIVITY, 0, NULL); | 
|  |  | 
|  | /* Some older Broadcom based Bluetooth 1.2 controllers do not | 
|  | * support the Read Page Scan Type command. Check support for | 
|  | * this command in the bit mask of supported commands. | 
|  | */ | 
|  | if (hdev->commands[13] & 0x01) | 
|  | hci_req_add(req, HCI_OP_READ_PAGE_SCAN_TYPE, 0, NULL); | 
|  |  | 
|  | if (lmp_le_capable(hdev)) { | 
|  | u8 events[8]; | 
|  |  | 
|  | memset(events, 0, sizeof(events)); | 
|  |  | 
|  | if (hdev->le_features[0] & HCI_LE_ENCRYPTION) | 
|  | events[0] |= 0x10;	/* LE Long Term Key Request */ | 
|  |  | 
|  | /* If controller supports the Connection Parameters Request | 
|  | * Link Layer Procedure, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->le_features[0] & HCI_LE_CONN_PARAM_REQ_PROC) | 
|  | events[0] |= 0x20;	/* LE Remote Connection | 
|  | * Parameter Request | 
|  | */ | 
|  |  | 
|  | /* If the controller supports the Data Length Extension | 
|  | * feature, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) | 
|  | events[0] |= 0x40;	/* LE Data Length Change */ | 
|  |  | 
|  | /* If the controller supports Extended Scanner Filter | 
|  | * Policies, enable the correspondig event. | 
|  | */ | 
|  | if (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY) | 
|  | events[1] |= 0x04;	/* LE Direct Advertising | 
|  | * Report | 
|  | */ | 
|  |  | 
|  | /* If the controller supports the LE Set Scan Enable command, | 
|  | * enable the corresponding advertising report event. | 
|  | */ | 
|  | if (hdev->commands[26] & 0x08) | 
|  | events[0] |= 0x02;	/* LE Advertising Report */ | 
|  |  | 
|  | /* If the controller supports the LE Create Connection | 
|  | * command, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->commands[26] & 0x10) | 
|  | events[0] |= 0x01;	/* LE Connection Complete */ | 
|  |  | 
|  | /* If the controller supports the LE Connection Update | 
|  | * command, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->commands[27] & 0x04) | 
|  | events[0] |= 0x04;	/* LE Connection Update | 
|  | * Complete | 
|  | */ | 
|  |  | 
|  | /* If the controller supports the LE Read Remote Used Features | 
|  | * command, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->commands[27] & 0x20) | 
|  | events[0] |= 0x08;	/* LE Read Remote Used | 
|  | * Features Complete | 
|  | */ | 
|  |  | 
|  | /* If the controller supports the LE Read Local P-256 | 
|  | * Public Key command, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->commands[34] & 0x02) | 
|  | events[0] |= 0x80;	/* LE Read Local P-256 | 
|  | * Public Key Complete | 
|  | */ | 
|  |  | 
|  | /* If the controller supports the LE Generate DHKey | 
|  | * command, enable the corresponding event. | 
|  | */ | 
|  | if (hdev->commands[34] & 0x04) | 
|  | events[1] |= 0x01;	/* LE Generate DHKey Complete */ | 
|  |  | 
|  | hci_req_add(req, HCI_OP_LE_SET_EVENT_MASK, sizeof(events), | 
|  | events); | 
|  |  | 
|  | if (hdev->commands[25] & 0x40) { | 
|  | /* Read LE Advertising Channel TX Power */ | 
|  | hci_req_add(req, HCI_OP_LE_READ_ADV_TX_POWER, 0, NULL); | 
|  | } | 
|  |  | 
|  | if (hdev->commands[26] & 0x40) { | 
|  | /* Read LE White List Size */ | 
|  | hci_req_add(req, HCI_OP_LE_READ_WHITE_LIST_SIZE, | 
|  | 0, NULL); | 
|  | } | 
|  |  | 
|  | if (hdev->commands[26] & 0x80) { | 
|  | /* Clear LE White List */ | 
|  | hci_req_add(req, HCI_OP_LE_CLEAR_WHITE_LIST, 0, NULL); | 
|  | } | 
|  |  | 
|  | if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) { | 
|  | /* Read LE Maximum Data Length */ | 
|  | hci_req_add(req, HCI_OP_LE_READ_MAX_DATA_LEN, 0, NULL); | 
|  |  | 
|  | /* Read LE Suggested Default Data Length */ | 
|  | hci_req_add(req, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL); | 
|  | } | 
|  |  | 
|  | hci_set_le_support(req); | 
|  | } | 
|  |  | 
|  | /* Read features beyond page 1 if available */ | 
|  | for (p = 2; p < HCI_MAX_PAGES && p <= hdev->max_page; p++) { | 
|  | struct hci_cp_read_local_ext_features cp; | 
|  |  | 
|  | cp.page = p; | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_EXT_FEATURES, | 
|  | sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hci_init4_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  |  | 
|  | /* Some Broadcom based Bluetooth controllers do not support the | 
|  | * Delete Stored Link Key command. They are clearly indicating its | 
|  | * absence in the bit mask of supported commands. | 
|  | * | 
|  | * Check the supported commands and only if the the command is marked | 
|  | * as supported send it. If not supported assume that the controller | 
|  | * does not have actual support for stored link keys which makes this | 
|  | * command redundant anyway. | 
|  | * | 
|  | * Some controllers indicate that they support handling deleting | 
|  | * stored link keys, but they don't. The quirk lets a driver | 
|  | * just disable this command. | 
|  | */ | 
|  | if (hdev->commands[6] & 0x80 && | 
|  | !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) { | 
|  | struct hci_cp_delete_stored_link_key cp; | 
|  |  | 
|  | bacpy(&cp.bdaddr, BDADDR_ANY); | 
|  | cp.delete_all = 0x01; | 
|  | hci_req_add(req, HCI_OP_DELETE_STORED_LINK_KEY, | 
|  | sizeof(cp), &cp); | 
|  | } | 
|  |  | 
|  | /* Set event mask page 2 if the HCI command for it is supported */ | 
|  | if (hdev->commands[22] & 0x04) | 
|  | hci_set_event_mask_page_2(req); | 
|  |  | 
|  | /* Read local codec list if the HCI command is supported */ | 
|  | if (hdev->commands[29] & 0x20) | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_CODECS, 0, NULL); | 
|  |  | 
|  | /* Get MWS transport configuration if the HCI command is supported */ | 
|  | if (hdev->commands[30] & 0x08) | 
|  | hci_req_add(req, HCI_OP_GET_MWS_TRANSPORT_CONFIG, 0, NULL); | 
|  |  | 
|  | /* Check for Synchronization Train support */ | 
|  | if (lmp_sync_train_capable(hdev)) | 
|  | hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL); | 
|  |  | 
|  | /* Enable Secure Connections if supported and configured */ | 
|  | if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) && | 
|  | bredr_sc_enabled(hdev)) { | 
|  | u8 support = 0x01; | 
|  |  | 
|  | hci_req_add(req, HCI_OP_WRITE_SC_SUPPORT, | 
|  | sizeof(support), &support); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __hci_init(struct hci_dev *hdev) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = __hci_req_sync(hdev, hci_init1_req, 0, HCI_INIT_TIMEOUT, NULL); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SETUP)) | 
|  | hci_debugfs_create_basic(hdev); | 
|  |  | 
|  | err = __hci_req_sync(hdev, hci_init2_req, 0, HCI_INIT_TIMEOUT, NULL); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* HCI_PRIMARY covers both single-mode LE, BR/EDR and dual-mode | 
|  | * BR/EDR/LE type controllers. AMP controllers only need the | 
|  | * first two stages of init. | 
|  | */ | 
|  | if (hdev->dev_type != HCI_PRIMARY) | 
|  | return 0; | 
|  |  | 
|  | err = __hci_req_sync(hdev, hci_init3_req, 0, HCI_INIT_TIMEOUT, NULL); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | err = __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT, NULL); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* This function is only called when the controller is actually in | 
|  | * configured state. When the controller is marked as unconfigured, | 
|  | * this initialization procedure is not run. | 
|  | * | 
|  | * It means that it is possible that a controller runs through its | 
|  | * setup phase and then discovers missing settings. If that is the | 
|  | * case, then this function will not be called. It then will only | 
|  | * be called during the config phase. | 
|  | * | 
|  | * So only when in setup phase or config phase, create the debugfs | 
|  | * entries and register the SMP channels. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_SETUP) && | 
|  | !hci_dev_test_flag(hdev, HCI_CONFIG)) | 
|  | return 0; | 
|  |  | 
|  | hci_debugfs_create_common(hdev); | 
|  |  | 
|  | if (lmp_bredr_capable(hdev)) | 
|  | hci_debugfs_create_bredr(hdev); | 
|  |  | 
|  | if (lmp_le_capable(hdev)) | 
|  | hci_debugfs_create_le(hdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hci_init0_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | struct hci_dev *hdev = req->hdev; | 
|  |  | 
|  | BT_DBG("%s %ld", hdev->name, opt); | 
|  |  | 
|  | /* Reset */ | 
|  | if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) | 
|  | hci_reset_req(req, 0); | 
|  |  | 
|  | /* Read Local Version */ | 
|  | hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL); | 
|  |  | 
|  | /* Read BD Address */ | 
|  | if (hdev->set_bdaddr) | 
|  | hci_req_add(req, HCI_OP_READ_BD_ADDR, 0, NULL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __hci_unconf_init(struct hci_dev *hdev) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) | 
|  | return 0; | 
|  |  | 
|  | err = __hci_req_sync(hdev, hci_init0_req, 0, HCI_INIT_TIMEOUT, NULL); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SETUP)) | 
|  | hci_debugfs_create_basic(hdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hci_scan_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | __u8 scan = opt; | 
|  |  | 
|  | BT_DBG("%s %x", req->hdev->name, scan); | 
|  |  | 
|  | /* Inquiry and Page scans */ | 
|  | hci_req_add(req, HCI_OP_WRITE_SCAN_ENABLE, 1, &scan); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hci_auth_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | __u8 auth = opt; | 
|  |  | 
|  | BT_DBG("%s %x", req->hdev->name, auth); | 
|  |  | 
|  | /* Authentication */ | 
|  | hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, 1, &auth); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hci_encrypt_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | __u8 encrypt = opt; | 
|  |  | 
|  | BT_DBG("%s %x", req->hdev->name, encrypt); | 
|  |  | 
|  | /* Encryption */ | 
|  | hci_req_add(req, HCI_OP_WRITE_ENCRYPT_MODE, 1, &encrypt); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int hci_linkpol_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | __le16 policy = cpu_to_le16(opt); | 
|  |  | 
|  | BT_DBG("%s %x", req->hdev->name, policy); | 
|  |  | 
|  | /* Default link policy */ | 
|  | hci_req_add(req, HCI_OP_WRITE_DEF_LINK_POLICY, 2, &policy); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Get HCI device by index. | 
|  | * Device is held on return. */ | 
|  | struct hci_dev *hci_dev_get(int index) | 
|  | { | 
|  | struct hci_dev *hdev = NULL, *d; | 
|  |  | 
|  | BT_DBG("%d", index); | 
|  |  | 
|  | if (index < 0) | 
|  | return NULL; | 
|  |  | 
|  | read_lock(&hci_dev_list_lock); | 
|  | list_for_each_entry(d, &hci_dev_list, list) { | 
|  | if (d->id == index) { | 
|  | hdev = hci_dev_hold(d); | 
|  | break; | 
|  | } | 
|  | } | 
|  | read_unlock(&hci_dev_list_lock); | 
|  | return hdev; | 
|  | } | 
|  |  | 
|  | /* ---- Inquiry support ---- */ | 
|  |  | 
|  | bool hci_discovery_active(struct hci_dev *hdev) | 
|  | { | 
|  | struct discovery_state *discov = &hdev->discovery; | 
|  |  | 
|  | switch (discov->state) { | 
|  | case DISCOVERY_FINDING: | 
|  | case DISCOVERY_RESOLVING: | 
|  | return true; | 
|  |  | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | void hci_discovery_set_state(struct hci_dev *hdev, int state) | 
|  | { | 
|  | int old_state = hdev->discovery.state; | 
|  |  | 
|  | BT_DBG("%s state %u -> %u", hdev->name, hdev->discovery.state, state); | 
|  |  | 
|  | if (old_state == state) | 
|  | return; | 
|  |  | 
|  | hdev->discovery.state = state; | 
|  |  | 
|  | switch (state) { | 
|  | case DISCOVERY_STOPPED: | 
|  | hci_update_background_scan(hdev); | 
|  |  | 
|  | if (old_state != DISCOVERY_STARTING) | 
|  | mgmt_discovering(hdev, 0); | 
|  | break; | 
|  | case DISCOVERY_STARTING: | 
|  | break; | 
|  | case DISCOVERY_FINDING: | 
|  | mgmt_discovering(hdev, 1); | 
|  | break; | 
|  | case DISCOVERY_RESOLVING: | 
|  | break; | 
|  | case DISCOVERY_STOPPING: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void hci_inquiry_cache_flush(struct hci_dev *hdev) | 
|  | { | 
|  | struct discovery_state *cache = &hdev->discovery; | 
|  | struct inquiry_entry *p, *n; | 
|  |  | 
|  | list_for_each_entry_safe(p, n, &cache->all, all) { | 
|  | list_del(&p->all); | 
|  | kfree(p); | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&cache->unknown); | 
|  | INIT_LIST_HEAD(&cache->resolve); | 
|  | } | 
|  |  | 
|  | struct inquiry_entry *hci_inquiry_cache_lookup(struct hci_dev *hdev, | 
|  | bdaddr_t *bdaddr) | 
|  | { | 
|  | struct discovery_state *cache = &hdev->discovery; | 
|  | struct inquiry_entry *e; | 
|  |  | 
|  | BT_DBG("cache %p, %pMR", cache, bdaddr); | 
|  |  | 
|  | list_for_each_entry(e, &cache->all, all) { | 
|  | if (!bacmp(&e->data.bdaddr, bdaddr)) | 
|  | return e; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct inquiry_entry *hci_inquiry_cache_lookup_unknown(struct hci_dev *hdev, | 
|  | bdaddr_t *bdaddr) | 
|  | { | 
|  | struct discovery_state *cache = &hdev->discovery; | 
|  | struct inquiry_entry *e; | 
|  |  | 
|  | BT_DBG("cache %p, %pMR", cache, bdaddr); | 
|  |  | 
|  | list_for_each_entry(e, &cache->unknown, list) { | 
|  | if (!bacmp(&e->data.bdaddr, bdaddr)) | 
|  | return e; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct inquiry_entry *hci_inquiry_cache_lookup_resolve(struct hci_dev *hdev, | 
|  | bdaddr_t *bdaddr, | 
|  | int state) | 
|  | { | 
|  | struct discovery_state *cache = &hdev->discovery; | 
|  | struct inquiry_entry *e; | 
|  |  | 
|  | BT_DBG("cache %p bdaddr %pMR state %d", cache, bdaddr, state); | 
|  |  | 
|  | list_for_each_entry(e, &cache->resolve, list) { | 
|  | if (!bacmp(bdaddr, BDADDR_ANY) && e->name_state == state) | 
|  | return e; | 
|  | if (!bacmp(&e->data.bdaddr, bdaddr)) | 
|  | return e; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void hci_inquiry_cache_update_resolve(struct hci_dev *hdev, | 
|  | struct inquiry_entry *ie) | 
|  | { | 
|  | struct discovery_state *cache = &hdev->discovery; | 
|  | struct list_head *pos = &cache->resolve; | 
|  | struct inquiry_entry *p; | 
|  |  | 
|  | list_del(&ie->list); | 
|  |  | 
|  | list_for_each_entry(p, &cache->resolve, list) { | 
|  | if (p->name_state != NAME_PENDING && | 
|  | abs(p->data.rssi) >= abs(ie->data.rssi)) | 
|  | break; | 
|  | pos = &p->list; | 
|  | } | 
|  |  | 
|  | list_add(&ie->list, pos); | 
|  | } | 
|  |  | 
|  | u32 hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data, | 
|  | bool name_known) | 
|  | { | 
|  | struct discovery_state *cache = &hdev->discovery; | 
|  | struct inquiry_entry *ie; | 
|  | u32 flags = 0; | 
|  |  | 
|  | BT_DBG("cache %p, %pMR", cache, &data->bdaddr); | 
|  |  | 
|  | hci_remove_remote_oob_data(hdev, &data->bdaddr, BDADDR_BREDR); | 
|  |  | 
|  | if (!data->ssp_mode) | 
|  | flags |= MGMT_DEV_FOUND_LEGACY_PAIRING; | 
|  |  | 
|  | ie = hci_inquiry_cache_lookup(hdev, &data->bdaddr); | 
|  | if (ie) { | 
|  | if (!ie->data.ssp_mode) | 
|  | flags |= MGMT_DEV_FOUND_LEGACY_PAIRING; | 
|  |  | 
|  | if (ie->name_state == NAME_NEEDED && | 
|  | data->rssi != ie->data.rssi) { | 
|  | ie->data.rssi = data->rssi; | 
|  | hci_inquiry_cache_update_resolve(hdev, ie); | 
|  | } | 
|  |  | 
|  | goto update; | 
|  | } | 
|  |  | 
|  | /* Entry not in the cache. Add new one. */ | 
|  | ie = kzalloc(sizeof(*ie), GFP_KERNEL); | 
|  | if (!ie) { | 
|  | flags |= MGMT_DEV_FOUND_CONFIRM_NAME; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | list_add(&ie->all, &cache->all); | 
|  |  | 
|  | if (name_known) { | 
|  | ie->name_state = NAME_KNOWN; | 
|  | } else { | 
|  | ie->name_state = NAME_NOT_KNOWN; | 
|  | list_add(&ie->list, &cache->unknown); | 
|  | } | 
|  |  | 
|  | update: | 
|  | if (name_known && ie->name_state != NAME_KNOWN && | 
|  | ie->name_state != NAME_PENDING) { | 
|  | ie->name_state = NAME_KNOWN; | 
|  | list_del(&ie->list); | 
|  | } | 
|  |  | 
|  | memcpy(&ie->data, data, sizeof(*data)); | 
|  | ie->timestamp = jiffies; | 
|  | cache->timestamp = jiffies; | 
|  |  | 
|  | if (ie->name_state == NAME_NOT_KNOWN) | 
|  | flags |= MGMT_DEV_FOUND_CONFIRM_NAME; | 
|  |  | 
|  | done: | 
|  | return flags; | 
|  | } | 
|  |  | 
|  | static int inquiry_cache_dump(struct hci_dev *hdev, int num, __u8 *buf) | 
|  | { | 
|  | struct discovery_state *cache = &hdev->discovery; | 
|  | struct inquiry_info *info = (struct inquiry_info *) buf; | 
|  | struct inquiry_entry *e; | 
|  | int copied = 0; | 
|  |  | 
|  | list_for_each_entry(e, &cache->all, all) { | 
|  | struct inquiry_data *data = &e->data; | 
|  |  | 
|  | if (copied >= num) | 
|  | break; | 
|  |  | 
|  | bacpy(&info->bdaddr, &data->bdaddr); | 
|  | info->pscan_rep_mode	= data->pscan_rep_mode; | 
|  | info->pscan_period_mode	= data->pscan_period_mode; | 
|  | info->pscan_mode	= data->pscan_mode; | 
|  | memcpy(info->dev_class, data->dev_class, 3); | 
|  | info->clock_offset	= data->clock_offset; | 
|  |  | 
|  | info++; | 
|  | copied++; | 
|  | } | 
|  |  | 
|  | BT_DBG("cache %p, copied %d", cache, copied); | 
|  | return copied; | 
|  | } | 
|  |  | 
|  | static int hci_inq_req(struct hci_request *req, unsigned long opt) | 
|  | { | 
|  | struct hci_inquiry_req *ir = (struct hci_inquiry_req *) opt; | 
|  | struct hci_dev *hdev = req->hdev; | 
|  | struct hci_cp_inquiry cp; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (test_bit(HCI_INQUIRY, &hdev->flags)) | 
|  | return 0; | 
|  |  | 
|  | /* Start Inquiry */ | 
|  | memcpy(&cp.lap, &ir->lap, 3); | 
|  | cp.length  = ir->length; | 
|  | cp.num_rsp = ir->num_rsp; | 
|  | hci_req_add(req, HCI_OP_INQUIRY, sizeof(cp), &cp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int hci_inquiry(void __user *arg) | 
|  | { | 
|  | __u8 __user *ptr = arg; | 
|  | struct hci_inquiry_req ir; | 
|  | struct hci_dev *hdev; | 
|  | int err = 0, do_inquiry = 0, max_rsp; | 
|  | long timeo; | 
|  | __u8 *buf; | 
|  |  | 
|  | if (copy_from_user(&ir, ptr, sizeof(ir))) | 
|  | return -EFAULT; | 
|  |  | 
|  | hdev = hci_dev_get(ir.dev_id); | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | err = -EBUSY; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hdev->dev_type != HCI_PRIMARY) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | if (inquiry_cache_age(hdev) > INQUIRY_CACHE_AGE_MAX || | 
|  | inquiry_cache_empty(hdev) || ir.flags & IREQ_CACHE_FLUSH) { | 
|  | hci_inquiry_cache_flush(hdev); | 
|  | do_inquiry = 1; | 
|  | } | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | timeo = ir.length * msecs_to_jiffies(2000); | 
|  |  | 
|  | if (do_inquiry) { | 
|  | err = hci_req_sync(hdev, hci_inq_req, (unsigned long) &ir, | 
|  | timeo, NULL); | 
|  | if (err < 0) | 
|  | goto done; | 
|  |  | 
|  | /* Wait until Inquiry procedure finishes (HCI_INQUIRY flag is | 
|  | * cleared). If it is interrupted by a signal, return -EINTR. | 
|  | */ | 
|  | if (wait_on_bit(&hdev->flags, HCI_INQUIRY, | 
|  | TASK_INTERRUPTIBLE)) | 
|  | return -EINTR; | 
|  | } | 
|  |  | 
|  | /* for unlimited number of responses we will use buffer with | 
|  | * 255 entries | 
|  | */ | 
|  | max_rsp = (ir.num_rsp == 0) ? 255 : ir.num_rsp; | 
|  |  | 
|  | /* cache_dump can't sleep. Therefore we allocate temp buffer and then | 
|  | * copy it to the user space. | 
|  | */ | 
|  | buf = kmalloc(sizeof(struct inquiry_info) * max_rsp, GFP_KERNEL); | 
|  | if (!buf) { | 
|  | err = -ENOMEM; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | ir.num_rsp = inquiry_cache_dump(hdev, max_rsp, buf); | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | BT_DBG("num_rsp %d", ir.num_rsp); | 
|  |  | 
|  | if (!copy_to_user(ptr, &ir, sizeof(ir))) { | 
|  | ptr += sizeof(ir); | 
|  | if (copy_to_user(ptr, buf, sizeof(struct inquiry_info) * | 
|  | ir.num_rsp)) | 
|  | err = -EFAULT; | 
|  | } else | 
|  | err = -EFAULT; | 
|  |  | 
|  | kfree(buf); | 
|  |  | 
|  | done: | 
|  | hci_dev_put(hdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int hci_dev_do_open(struct hci_dev *hdev) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | BT_DBG("%s %p", hdev->name, hdev); | 
|  |  | 
|  | hci_req_sync_lock(hdev); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { | 
|  | ret = -ENODEV; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_SETUP) && | 
|  | !hci_dev_test_flag(hdev, HCI_CONFIG)) { | 
|  | /* Check for rfkill but allow the HCI setup stage to | 
|  | * proceed (which in itself doesn't cause any RF activity). | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_RFKILLED)) { | 
|  | ret = -ERFKILL; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* Check for valid public address or a configured static | 
|  | * random adddress, but let the HCI setup proceed to | 
|  | * be able to determine if there is a public address | 
|  | * or not. | 
|  | * | 
|  | * In case of user channel usage, it is not important | 
|  | * if a public address or static random address is | 
|  | * available. | 
|  | * | 
|  | * This check is only valid for BR/EDR controllers | 
|  | * since AMP controllers do not have an address. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | 
|  | hdev->dev_type == HCI_PRIMARY && | 
|  | !bacmp(&hdev->bdaddr, BDADDR_ANY) && | 
|  | !bacmp(&hdev->static_addr, BDADDR_ANY)) { | 
|  | ret = -EADDRNOTAVAIL; | 
|  | goto done; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(HCI_UP, &hdev->flags)) { | 
|  | ret = -EALREADY; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hdev->open(hdev)) { | 
|  | ret = -EIO; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | set_bit(HCI_RUNNING, &hdev->flags); | 
|  | hci_sock_dev_event(hdev, HCI_DEV_OPEN); | 
|  |  | 
|  | atomic_set(&hdev->cmd_cnt, 1); | 
|  | set_bit(HCI_INIT, &hdev->flags); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_SETUP)) { | 
|  | hci_sock_dev_event(hdev, HCI_DEV_SETUP); | 
|  |  | 
|  | if (hdev->setup) | 
|  | ret = hdev->setup(hdev); | 
|  |  | 
|  | /* The transport driver can set these quirks before | 
|  | * creating the HCI device or in its setup callback. | 
|  | * | 
|  | * In case any of them is set, the controller has to | 
|  | * start up as unconfigured. | 
|  | */ | 
|  | if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) || | 
|  | test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks)) | 
|  | hci_dev_set_flag(hdev, HCI_UNCONFIGURED); | 
|  |  | 
|  | /* For an unconfigured controller it is required to | 
|  | * read at least the version information provided by | 
|  | * the Read Local Version Information command. | 
|  | * | 
|  | * If the set_bdaddr driver callback is provided, then | 
|  | * also the original Bluetooth public device address | 
|  | * will be read using the Read BD Address command. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) | 
|  | ret = __hci_unconf_init(hdev); | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_CONFIG)) { | 
|  | /* If public address change is configured, ensure that | 
|  | * the address gets programmed. If the driver does not | 
|  | * support changing the public address, fail the power | 
|  | * on procedure. | 
|  | */ | 
|  | if (bacmp(&hdev->public_addr, BDADDR_ANY) && | 
|  | hdev->set_bdaddr) | 
|  | ret = hdev->set_bdaddr(hdev, &hdev->public_addr); | 
|  | else | 
|  | ret = -EADDRNOTAVAIL; | 
|  | } | 
|  |  | 
|  | if (!ret) { | 
|  | if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && | 
|  | !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | ret = __hci_init(hdev); | 
|  | if (!ret && hdev->post_init) | 
|  | ret = hdev->post_init(hdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If the HCI Reset command is clearing all diagnostic settings, | 
|  | * then they need to be reprogrammed after the init procedure | 
|  | * completed. | 
|  | */ | 
|  | if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && | 
|  | hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) && hdev->set_diag) | 
|  | ret = hdev->set_diag(hdev, true); | 
|  |  | 
|  | clear_bit(HCI_INIT, &hdev->flags); | 
|  |  | 
|  | if (!ret) { | 
|  | hci_dev_hold(hdev); | 
|  | hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); | 
|  | set_bit(HCI_UP, &hdev->flags); | 
|  | hci_sock_dev_event(hdev, HCI_DEV_UP); | 
|  | hci_leds_update_powered(hdev, true); | 
|  | if (!hci_dev_test_flag(hdev, HCI_SETUP) && | 
|  | !hci_dev_test_flag(hdev, HCI_CONFIG) && | 
|  | !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && | 
|  | !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | 
|  | hci_dev_test_flag(hdev, HCI_MGMT) && | 
|  | hdev->dev_type == HCI_PRIMARY) { | 
|  | ret = __hci_req_hci_power_on(hdev); | 
|  | mgmt_power_on(hdev, ret); | 
|  | } | 
|  | } else { | 
|  | /* Init failed, cleanup */ | 
|  | flush_work(&hdev->tx_work); | 
|  | flush_work(&hdev->cmd_work); | 
|  | flush_work(&hdev->rx_work); | 
|  |  | 
|  | skb_queue_purge(&hdev->cmd_q); | 
|  | skb_queue_purge(&hdev->rx_q); | 
|  |  | 
|  | if (hdev->flush) | 
|  | hdev->flush(hdev); | 
|  |  | 
|  | if (hdev->sent_cmd) { | 
|  | kfree_skb(hdev->sent_cmd); | 
|  | hdev->sent_cmd = NULL; | 
|  | } | 
|  |  | 
|  | clear_bit(HCI_RUNNING, &hdev->flags); | 
|  | hci_sock_dev_event(hdev, HCI_DEV_CLOSE); | 
|  |  | 
|  | hdev->close(hdev); | 
|  | hdev->flags &= BIT(HCI_RAW); | 
|  | } | 
|  |  | 
|  | done: | 
|  | hci_req_sync_unlock(hdev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* ---- HCI ioctl helpers ---- */ | 
|  |  | 
|  | int hci_dev_open(__u16 dev) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  | int err; | 
|  |  | 
|  | hdev = hci_dev_get(dev); | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Devices that are marked as unconfigured can only be powered | 
|  | * up as user channel. Trying to bring them up as normal devices | 
|  | * will result into a failure. Only user channel operation is | 
|  | * possible. | 
|  | * | 
|  | * When this function is called for a user channel, the flag | 
|  | * HCI_USER_CHANNEL will be set first before attempting to | 
|  | * open the device. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && | 
|  | !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* We need to ensure that no other power on/off work is pending | 
|  | * before proceeding to call hci_dev_do_open. This is | 
|  | * particularly important if the setup procedure has not yet | 
|  | * completed. | 
|  | */ | 
|  | if (hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) | 
|  | cancel_delayed_work(&hdev->power_off); | 
|  |  | 
|  | /* After this call it is guaranteed that the setup procedure | 
|  | * has finished. This means that error conditions like RFKILL | 
|  | * or no valid public or static random address apply. | 
|  | */ | 
|  | flush_workqueue(hdev->req_workqueue); | 
|  |  | 
|  | /* For controllers not using the management interface and that | 
|  | * are brought up using legacy ioctl, set the HCI_BONDABLE bit | 
|  | * so that pairing works for them. Once the management interface | 
|  | * is in use this bit will be cleared again and userspace has | 
|  | * to explicitly enable it. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | 
|  | !hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | hci_dev_set_flag(hdev, HCI_BONDABLE); | 
|  |  | 
|  | err = hci_dev_do_open(hdev); | 
|  |  | 
|  | done: | 
|  | hci_dev_put(hdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | static void hci_pend_le_actions_clear(struct hci_dev *hdev) | 
|  | { | 
|  | struct hci_conn_params *p; | 
|  |  | 
|  | list_for_each_entry(p, &hdev->le_conn_params, list) { | 
|  | if (p->conn) { | 
|  | hci_conn_drop(p->conn); | 
|  | hci_conn_put(p->conn); | 
|  | p->conn = NULL; | 
|  | } | 
|  | list_del_init(&p->action); | 
|  | } | 
|  |  | 
|  | BT_DBG("All LE pending actions cleared"); | 
|  | } | 
|  |  | 
|  | int hci_dev_do_close(struct hci_dev *hdev) | 
|  | { | 
|  | bool auto_off; | 
|  |  | 
|  | BT_DBG("%s %p", hdev->name, hdev); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && | 
|  | !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | 
|  | test_bit(HCI_UP, &hdev->flags)) { | 
|  | /* Execute vendor specific shutdown routine */ | 
|  | if (hdev->shutdown) | 
|  | hdev->shutdown(hdev); | 
|  | } | 
|  |  | 
|  | cancel_delayed_work(&hdev->power_off); | 
|  |  | 
|  | hci_request_cancel_all(hdev); | 
|  | hci_req_sync_lock(hdev); | 
|  |  | 
|  | if (!test_and_clear_bit(HCI_UP, &hdev->flags)) { | 
|  | cancel_delayed_work_sync(&hdev->cmd_timer); | 
|  | hci_req_sync_unlock(hdev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | hci_leds_update_powered(hdev, false); | 
|  |  | 
|  | /* Flush RX and TX works */ | 
|  | flush_work(&hdev->tx_work); | 
|  | flush_work(&hdev->rx_work); | 
|  |  | 
|  | if (hdev->discov_timeout > 0) { | 
|  | hdev->discov_timeout = 0; | 
|  | hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); | 
|  | hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE)) | 
|  | cancel_delayed_work(&hdev->service_cache); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | cancel_delayed_work_sync(&hdev->rpa_expired); | 
|  |  | 
|  | /* Avoid potential lockdep warnings from the *_flush() calls by | 
|  | * ensuring the workqueue is empty up front. | 
|  | */ | 
|  | drain_workqueue(hdev->workqueue); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  |  | 
|  | hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | 
|  |  | 
|  | auto_off = hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF); | 
|  |  | 
|  | if (!auto_off && hdev->dev_type == HCI_PRIMARY && | 
|  | !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | 
|  | hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | __mgmt_power_off(hdev); | 
|  |  | 
|  | hci_inquiry_cache_flush(hdev); | 
|  | hci_pend_le_actions_clear(hdev); | 
|  | hci_conn_hash_flush(hdev); | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | smp_unregister(hdev); | 
|  |  | 
|  | hci_sock_dev_event(hdev, HCI_DEV_DOWN); | 
|  |  | 
|  | if (hdev->flush) | 
|  | hdev->flush(hdev); | 
|  |  | 
|  | /* Reset device */ | 
|  | skb_queue_purge(&hdev->cmd_q); | 
|  | atomic_set(&hdev->cmd_cnt, 1); | 
|  | if (test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks) && | 
|  | !auto_off && !hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | 
|  | set_bit(HCI_INIT, &hdev->flags); | 
|  | __hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT, NULL); | 
|  | clear_bit(HCI_INIT, &hdev->flags); | 
|  | } | 
|  |  | 
|  | /* flush cmd  work */ | 
|  | flush_work(&hdev->cmd_work); | 
|  |  | 
|  | /* Drop queues */ | 
|  | skb_queue_purge(&hdev->rx_q); | 
|  | skb_queue_purge(&hdev->cmd_q); | 
|  | skb_queue_purge(&hdev->raw_q); | 
|  |  | 
|  | /* Drop last sent command */ | 
|  | if (hdev->sent_cmd) { | 
|  | cancel_delayed_work_sync(&hdev->cmd_timer); | 
|  | kfree_skb(hdev->sent_cmd); | 
|  | hdev->sent_cmd = NULL; | 
|  | } | 
|  |  | 
|  | clear_bit(HCI_RUNNING, &hdev->flags); | 
|  | hci_sock_dev_event(hdev, HCI_DEV_CLOSE); | 
|  |  | 
|  | /* After this point our queues are empty | 
|  | * and no tasks are scheduled. */ | 
|  | hdev->close(hdev); | 
|  |  | 
|  | /* Clear flags */ | 
|  | hdev->flags &= BIT(HCI_RAW); | 
|  | hci_dev_clear_volatile_flags(hdev); | 
|  |  | 
|  | /* Controller radio is available but is currently powered down */ | 
|  | hdev->amp_status = AMP_STATUS_POWERED_DOWN; | 
|  |  | 
|  | memset(hdev->eir, 0, sizeof(hdev->eir)); | 
|  | memset(hdev->dev_class, 0, sizeof(hdev->dev_class)); | 
|  | bacpy(&hdev->random_addr, BDADDR_ANY); | 
|  |  | 
|  | hci_req_sync_unlock(hdev); | 
|  |  | 
|  | hci_dev_put(hdev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int hci_dev_close(__u16 dev) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  | int err; | 
|  |  | 
|  | hdev = hci_dev_get(dev); | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | err = -EBUSY; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) | 
|  | cancel_delayed_work(&hdev->power_off); | 
|  |  | 
|  | err = hci_dev_do_close(hdev); | 
|  |  | 
|  | done: | 
|  | hci_dev_put(hdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int hci_dev_do_reset(struct hci_dev *hdev) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | BT_DBG("%s %p", hdev->name, hdev); | 
|  |  | 
|  | hci_req_sync_lock(hdev); | 
|  |  | 
|  | /* Drop queues */ | 
|  | skb_queue_purge(&hdev->rx_q); | 
|  | skb_queue_purge(&hdev->cmd_q); | 
|  |  | 
|  | /* Avoid potential lockdep warnings from the *_flush() calls by | 
|  | * ensuring the workqueue is empty up front. | 
|  | */ | 
|  | drain_workqueue(hdev->workqueue); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | hci_inquiry_cache_flush(hdev); | 
|  | hci_conn_hash_flush(hdev); | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | if (hdev->flush) | 
|  | hdev->flush(hdev); | 
|  |  | 
|  | atomic_set(&hdev->cmd_cnt, 1); | 
|  | hdev->acl_cnt = 0; hdev->sco_cnt = 0; hdev->le_cnt = 0; | 
|  |  | 
|  | ret = __hci_req_sync(hdev, hci_reset_req, 0, HCI_INIT_TIMEOUT, NULL); | 
|  |  | 
|  | hci_req_sync_unlock(hdev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int hci_dev_reset(__u16 dev) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  | int err; | 
|  |  | 
|  | hdev = hci_dev_get(dev); | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!test_bit(HCI_UP, &hdev->flags)) { | 
|  | err = -ENETDOWN; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | err = -EBUSY; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | err = hci_dev_do_reset(hdev); | 
|  |  | 
|  | done: | 
|  | hci_dev_put(hdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int hci_dev_reset_stat(__u16 dev) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  | int ret = 0; | 
|  |  | 
|  | hdev = hci_dev_get(dev); | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | ret = -EBUSY; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | 
|  | ret = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | memset(&hdev->stat, 0, sizeof(struct hci_dev_stats)); | 
|  |  | 
|  | done: | 
|  | hci_dev_put(hdev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void hci_update_scan_state(struct hci_dev *hdev, u8 scan) | 
|  | { | 
|  | bool conn_changed, discov_changed; | 
|  |  | 
|  | BT_DBG("%s scan 0x%02x", hdev->name, scan); | 
|  |  | 
|  | if ((scan & SCAN_PAGE)) | 
|  | conn_changed = !hci_dev_test_and_set_flag(hdev, | 
|  | HCI_CONNECTABLE); | 
|  | else | 
|  | conn_changed = hci_dev_test_and_clear_flag(hdev, | 
|  | HCI_CONNECTABLE); | 
|  |  | 
|  | if ((scan & SCAN_INQUIRY)) { | 
|  | discov_changed = !hci_dev_test_and_set_flag(hdev, | 
|  | HCI_DISCOVERABLE); | 
|  | } else { | 
|  | hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); | 
|  | discov_changed = hci_dev_test_and_clear_flag(hdev, | 
|  | HCI_DISCOVERABLE); | 
|  | } | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_MGMT)) | 
|  | return; | 
|  |  | 
|  | if (conn_changed || discov_changed) { | 
|  | /* In case this was disabled through mgmt */ | 
|  | hci_dev_set_flag(hdev, HCI_BREDR_ENABLED); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) | 
|  | hci_req_update_adv_data(hdev, hdev->cur_adv_instance); | 
|  |  | 
|  | mgmt_new_settings(hdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | int hci_dev_cmd(unsigned int cmd, void __user *arg) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  | struct hci_dev_req dr; | 
|  | int err = 0; | 
|  |  | 
|  | if (copy_from_user(&dr, arg, sizeof(dr))) | 
|  | return -EFAULT; | 
|  |  | 
|  | hdev = hci_dev_get(dr.dev_id); | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | err = -EBUSY; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (hdev->dev_type != HCI_PRIMARY) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | switch (cmd) { | 
|  | case HCISETAUTH: | 
|  | err = hci_req_sync(hdev, hci_auth_req, dr.dev_opt, | 
|  | HCI_INIT_TIMEOUT, NULL); | 
|  | break; | 
|  |  | 
|  | case HCISETENCRYPT: | 
|  | if (!lmp_encrypt_capable(hdev)) { | 
|  | err = -EOPNOTSUPP; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!test_bit(HCI_AUTH, &hdev->flags)) { | 
|  | /* Auth must be enabled first */ | 
|  | err = hci_req_sync(hdev, hci_auth_req, dr.dev_opt, | 
|  | HCI_INIT_TIMEOUT, NULL); | 
|  | if (err) | 
|  | break; | 
|  | } | 
|  |  | 
|  | err = hci_req_sync(hdev, hci_encrypt_req, dr.dev_opt, | 
|  | HCI_INIT_TIMEOUT, NULL); | 
|  | break; | 
|  |  | 
|  | case HCISETSCAN: | 
|  | err = hci_req_sync(hdev, hci_scan_req, dr.dev_opt, | 
|  | HCI_INIT_TIMEOUT, NULL); | 
|  |  | 
|  | /* Ensure that the connectable and discoverable states | 
|  | * get correctly modified as this was a non-mgmt change. | 
|  | */ | 
|  | if (!err) | 
|  | hci_update_scan_state(hdev, dr.dev_opt); | 
|  | break; | 
|  |  | 
|  | case HCISETLINKPOL: | 
|  | err = hci_req_sync(hdev, hci_linkpol_req, dr.dev_opt, | 
|  | HCI_INIT_TIMEOUT, NULL); | 
|  | break; | 
|  |  | 
|  | case HCISETLINKMODE: | 
|  | hdev->link_mode = ((__u16) dr.dev_opt) & | 
|  | (HCI_LM_MASTER | HCI_LM_ACCEPT); | 
|  | break; | 
|  |  | 
|  | case HCISETPTYPE: | 
|  | hdev->pkt_type = (__u16) dr.dev_opt; | 
|  | break; | 
|  |  | 
|  | case HCISETACLMTU: | 
|  | hdev->acl_mtu  = *((__u16 *) &dr.dev_opt + 1); | 
|  | hdev->acl_pkts = *((__u16 *) &dr.dev_opt + 0); | 
|  | break; | 
|  |  | 
|  | case HCISETSCOMTU: | 
|  | hdev->sco_mtu  = *((__u16 *) &dr.dev_opt + 1); | 
|  | hdev->sco_pkts = *((__u16 *) &dr.dev_opt + 0); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | done: | 
|  | hci_dev_put(hdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int hci_get_dev_list(void __user *arg) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  | struct hci_dev_list_req *dl; | 
|  | struct hci_dev_req *dr; | 
|  | int n = 0, size, err; | 
|  | __u16 dev_num; | 
|  |  | 
|  | if (get_user(dev_num, (__u16 __user *) arg)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (!dev_num || dev_num > (PAGE_SIZE * 2) / sizeof(*dr)) | 
|  | return -EINVAL; | 
|  |  | 
|  | size = sizeof(*dl) + dev_num * sizeof(*dr); | 
|  |  | 
|  | dl = kzalloc(size, GFP_KERNEL); | 
|  | if (!dl) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dr = dl->dev_req; | 
|  |  | 
|  | read_lock(&hci_dev_list_lock); | 
|  | list_for_each_entry(hdev, &hci_dev_list, list) { | 
|  | unsigned long flags = hdev->flags; | 
|  |  | 
|  | /* When the auto-off is configured it means the transport | 
|  | * is running, but in that case still indicate that the | 
|  | * device is actually down. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) | 
|  | flags &= ~BIT(HCI_UP); | 
|  |  | 
|  | (dr + n)->dev_id  = hdev->id; | 
|  | (dr + n)->dev_opt = flags; | 
|  |  | 
|  | if (++n >= dev_num) | 
|  | break; | 
|  | } | 
|  | read_unlock(&hci_dev_list_lock); | 
|  |  | 
|  | dl->dev_num = n; | 
|  | size = sizeof(*dl) + n * sizeof(*dr); | 
|  |  | 
|  | err = copy_to_user(arg, dl, size); | 
|  | kfree(dl); | 
|  |  | 
|  | return err ? -EFAULT : 0; | 
|  | } | 
|  |  | 
|  | int hci_get_dev_info(void __user *arg) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  | struct hci_dev_info di; | 
|  | unsigned long flags; | 
|  | int err = 0; | 
|  |  | 
|  | if (copy_from_user(&di, arg, sizeof(di))) | 
|  | return -EFAULT; | 
|  |  | 
|  | hdev = hci_dev_get(di.dev_id); | 
|  | if (!hdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* When the auto-off is configured it means the transport | 
|  | * is running, but in that case still indicate that the | 
|  | * device is actually down. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) | 
|  | flags = hdev->flags & ~BIT(HCI_UP); | 
|  | else | 
|  | flags = hdev->flags; | 
|  |  | 
|  | strcpy(di.name, hdev->name); | 
|  | di.bdaddr   = hdev->bdaddr; | 
|  | di.type     = (hdev->bus & 0x0f) | ((hdev->dev_type & 0x03) << 4); | 
|  | di.flags    = flags; | 
|  | di.pkt_type = hdev->pkt_type; | 
|  | if (lmp_bredr_capable(hdev)) { | 
|  | di.acl_mtu  = hdev->acl_mtu; | 
|  | di.acl_pkts = hdev->acl_pkts; | 
|  | di.sco_mtu  = hdev->sco_mtu; | 
|  | di.sco_pkts = hdev->sco_pkts; | 
|  | } else { | 
|  | di.acl_mtu  = hdev->le_mtu; | 
|  | di.acl_pkts = hdev->le_pkts; | 
|  | di.sco_mtu  = 0; | 
|  | di.sco_pkts = 0; | 
|  | } | 
|  | di.link_policy = hdev->link_policy; | 
|  | di.link_mode   = hdev->link_mode; | 
|  |  | 
|  | memcpy(&di.stat, &hdev->stat, sizeof(di.stat)); | 
|  | memcpy(&di.features, &hdev->features, sizeof(di.features)); | 
|  |  | 
|  | if (copy_to_user(arg, &di, sizeof(di))) | 
|  | err = -EFAULT; | 
|  |  | 
|  | hci_dev_put(hdev); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* ---- Interface to HCI drivers ---- */ | 
|  |  | 
|  | static int hci_rfkill_set_block(void *data, bool blocked) | 
|  | { | 
|  | struct hci_dev *hdev = data; | 
|  |  | 
|  | BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked); | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (blocked) { | 
|  | hci_dev_set_flag(hdev, HCI_RFKILLED); | 
|  | if (!hci_dev_test_flag(hdev, HCI_SETUP) && | 
|  | !hci_dev_test_flag(hdev, HCI_CONFIG)) | 
|  | hci_dev_do_close(hdev); | 
|  | } else { | 
|  | hci_dev_clear_flag(hdev, HCI_RFKILLED); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct rfkill_ops hci_rfkill_ops = { | 
|  | .set_block = hci_rfkill_set_block, | 
|  | }; | 
|  |  | 
|  | static void hci_power_on(struct work_struct *work) | 
|  | { | 
|  | struct hci_dev *hdev = container_of(work, struct hci_dev, power_on); | 
|  | int err; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (test_bit(HCI_UP, &hdev->flags) && | 
|  | hci_dev_test_flag(hdev, HCI_MGMT) && | 
|  | hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) { | 
|  | cancel_delayed_work(&hdev->power_off); | 
|  | hci_req_sync_lock(hdev); | 
|  | err = __hci_req_hci_power_on(hdev); | 
|  | hci_req_sync_unlock(hdev); | 
|  | mgmt_power_on(hdev, err); | 
|  | return; | 
|  | } | 
|  |  | 
|  | err = hci_dev_do_open(hdev); | 
|  | if (err < 0) { | 
|  | hci_dev_lock(hdev); | 
|  | mgmt_set_powered_failed(hdev, err); | 
|  | hci_dev_unlock(hdev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* During the HCI setup phase, a few error conditions are | 
|  | * ignored and they need to be checked now. If they are still | 
|  | * valid, it is important to turn the device back off. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_RFKILLED) || | 
|  | hci_dev_test_flag(hdev, HCI_UNCONFIGURED) || | 
|  | (hdev->dev_type == HCI_PRIMARY && | 
|  | !bacmp(&hdev->bdaddr, BDADDR_ANY) && | 
|  | !bacmp(&hdev->static_addr, BDADDR_ANY))) { | 
|  | hci_dev_clear_flag(hdev, HCI_AUTO_OFF); | 
|  | hci_dev_do_close(hdev); | 
|  | } else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) { | 
|  | queue_delayed_work(hdev->req_workqueue, &hdev->power_off, | 
|  | HCI_AUTO_OFF_TIMEOUT); | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_and_clear_flag(hdev, HCI_SETUP)) { | 
|  | /* For unconfigured devices, set the HCI_RAW flag | 
|  | * so that userspace can easily identify them. | 
|  | */ | 
|  | if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) | 
|  | set_bit(HCI_RAW, &hdev->flags); | 
|  |  | 
|  | /* For fully configured devices, this will send | 
|  | * the Index Added event. For unconfigured devices, | 
|  | * it will send Unconfigued Index Added event. | 
|  | * | 
|  | * Devices with HCI_QUIRK_RAW_DEVICE are ignored | 
|  | * and no event will be send. | 
|  | */ | 
|  | mgmt_index_added(hdev); | 
|  | } else if (hci_dev_test_and_clear_flag(hdev, HCI_CONFIG)) { | 
|  | /* When the controller is now configured, then it | 
|  | * is important to clear the HCI_RAW flag. | 
|  | */ | 
|  | if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) | 
|  | clear_bit(HCI_RAW, &hdev->flags); | 
|  |  | 
|  | /* Powering on the controller with HCI_CONFIG set only | 
|  | * happens with the transition from unconfigured to | 
|  | * configured. This will send the Index Added event. | 
|  | */ | 
|  | mgmt_index_added(hdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_power_off(struct work_struct *work) | 
|  | { | 
|  | struct hci_dev *hdev = container_of(work, struct hci_dev, | 
|  | power_off.work); | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | hci_dev_do_close(hdev); | 
|  | } | 
|  |  | 
|  | static void hci_error_reset(struct work_struct *work) | 
|  | { | 
|  | struct hci_dev *hdev = container_of(work, struct hci_dev, error_reset); | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (hdev->hw_error) | 
|  | hdev->hw_error(hdev, hdev->hw_error_code); | 
|  | else | 
|  | BT_ERR("%s hardware error 0x%2.2x", hdev->name, | 
|  | hdev->hw_error_code); | 
|  |  | 
|  | if (hci_dev_do_close(hdev)) | 
|  | return; | 
|  |  | 
|  | hci_dev_do_open(hdev); | 
|  | } | 
|  |  | 
|  | void hci_uuids_clear(struct hci_dev *hdev) | 
|  | { | 
|  | struct bt_uuid *uuid, *tmp; | 
|  |  | 
|  | list_for_each_entry_safe(uuid, tmp, &hdev->uuids, list) { | 
|  | list_del(&uuid->list); | 
|  | kfree(uuid); | 
|  | } | 
|  | } | 
|  |  | 
|  | void hci_link_keys_clear(struct hci_dev *hdev) | 
|  | { | 
|  | struct link_key *key; | 
|  |  | 
|  | list_for_each_entry_rcu(key, &hdev->link_keys, list) { | 
|  | list_del_rcu(&key->list); | 
|  | kfree_rcu(key, rcu); | 
|  | } | 
|  | } | 
|  |  | 
|  | void hci_smp_ltks_clear(struct hci_dev *hdev) | 
|  | { | 
|  | struct smp_ltk *k; | 
|  |  | 
|  | list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { | 
|  | list_del_rcu(&k->list); | 
|  | kfree_rcu(k, rcu); | 
|  | } | 
|  | } | 
|  |  | 
|  | void hci_smp_irks_clear(struct hci_dev *hdev) | 
|  | { | 
|  | struct smp_irk *k; | 
|  |  | 
|  | list_for_each_entry_rcu(k, &hdev->identity_resolving_keys, list) { | 
|  | list_del_rcu(&k->list); | 
|  | kfree_rcu(k, rcu); | 
|  | } | 
|  | } | 
|  |  | 
|  | struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr) | 
|  | { | 
|  | struct link_key *k; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(k, &hdev->link_keys, list) { | 
|  | if (bacmp(bdaddr, &k->bdaddr) == 0) { | 
|  | rcu_read_unlock(); | 
|  | return k; | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static bool hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, | 
|  | u8 key_type, u8 old_key_type) | 
|  | { | 
|  | /* Legacy key */ | 
|  | if (key_type < 0x03) | 
|  | return true; | 
|  |  | 
|  | /* Debug keys are insecure so don't store them persistently */ | 
|  | if (key_type == HCI_LK_DEBUG_COMBINATION) | 
|  | return false; | 
|  |  | 
|  | /* Changed combination key and there's no previous one */ | 
|  | if (key_type == HCI_LK_CHANGED_COMBINATION && old_key_type == 0xff) | 
|  | return false; | 
|  |  | 
|  | /* Security mode 3 case */ | 
|  | if (!conn) | 
|  | return true; | 
|  |  | 
|  | /* BR/EDR key derived using SC from an LE link */ | 
|  | if (conn->type == LE_LINK) | 
|  | return true; | 
|  |  | 
|  | /* Neither local nor remote side had no-bonding as requirement */ | 
|  | if (conn->auth_type > 0x01 && conn->remote_auth > 0x01) | 
|  | return true; | 
|  |  | 
|  | /* Local side had dedicated bonding as requirement */ | 
|  | if (conn->auth_type == 0x02 || conn->auth_type == 0x03) | 
|  | return true; | 
|  |  | 
|  | /* Remote side had dedicated bonding as requirement */ | 
|  | if (conn->remote_auth == 0x02 || conn->remote_auth == 0x03) | 
|  | return true; | 
|  |  | 
|  | /* If none of the above criteria match, then don't store the key | 
|  | * persistently */ | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static u8 ltk_role(u8 type) | 
|  | { | 
|  | if (type == SMP_LTK) | 
|  | return HCI_ROLE_MASTER; | 
|  |  | 
|  | return HCI_ROLE_SLAVE; | 
|  | } | 
|  |  | 
|  | struct smp_ltk *hci_find_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 addr_type, u8 role) | 
|  | { | 
|  | struct smp_ltk *k; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { | 
|  | if (addr_type != k->bdaddr_type || bacmp(bdaddr, &k->bdaddr)) | 
|  | continue; | 
|  |  | 
|  | if (smp_ltk_is_sc(k) || ltk_role(k->type) == role) { | 
|  | rcu_read_unlock(); | 
|  | return k; | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct smp_irk *hci_find_irk_by_rpa(struct hci_dev *hdev, bdaddr_t *rpa) | 
|  | { | 
|  | struct smp_irk *irk; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(irk, &hdev->identity_resolving_keys, list) { | 
|  | if (!bacmp(&irk->rpa, rpa)) { | 
|  | rcu_read_unlock(); | 
|  | return irk; | 
|  | } | 
|  | } | 
|  |  | 
|  | list_for_each_entry_rcu(irk, &hdev->identity_resolving_keys, list) { | 
|  | if (smp_irk_matches(hdev, irk->val, rpa)) { | 
|  | bacpy(&irk->rpa, rpa); | 
|  | rcu_read_unlock(); | 
|  | return irk; | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct smp_irk *hci_find_irk_by_addr(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 addr_type) | 
|  | { | 
|  | struct smp_irk *irk; | 
|  |  | 
|  | /* Identity Address must be public or static random */ | 
|  | if (addr_type == ADDR_LE_DEV_RANDOM && (bdaddr->b[5] & 0xc0) != 0xc0) | 
|  | return NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(irk, &hdev->identity_resolving_keys, list) { | 
|  | if (addr_type == irk->addr_type && | 
|  | bacmp(bdaddr, &irk->bdaddr) == 0) { | 
|  | rcu_read_unlock(); | 
|  | return irk; | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct link_key *hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, | 
|  | bdaddr_t *bdaddr, u8 *val, u8 type, | 
|  | u8 pin_len, bool *persistent) | 
|  | { | 
|  | struct link_key *key, *old_key; | 
|  | u8 old_key_type; | 
|  |  | 
|  | old_key = hci_find_link_key(hdev, bdaddr); | 
|  | if (old_key) { | 
|  | old_key_type = old_key->type; | 
|  | key = old_key; | 
|  | } else { | 
|  | old_key_type = conn ? conn->key_type : 0xff; | 
|  | key = kzalloc(sizeof(*key), GFP_KERNEL); | 
|  | if (!key) | 
|  | return NULL; | 
|  | list_add_rcu(&key->list, &hdev->link_keys); | 
|  | } | 
|  |  | 
|  | BT_DBG("%s key for %pMR type %u", hdev->name, bdaddr, type); | 
|  |  | 
|  | /* Some buggy controller combinations generate a changed | 
|  | * combination key for legacy pairing even when there's no | 
|  | * previous key */ | 
|  | if (type == HCI_LK_CHANGED_COMBINATION && | 
|  | (!conn || conn->remote_auth == 0xff) && old_key_type == 0xff) { | 
|  | type = HCI_LK_COMBINATION; | 
|  | if (conn) | 
|  | conn->key_type = type; | 
|  | } | 
|  |  | 
|  | bacpy(&key->bdaddr, bdaddr); | 
|  | memcpy(key->val, val, HCI_LINK_KEY_SIZE); | 
|  | key->pin_len = pin_len; | 
|  |  | 
|  | if (type == HCI_LK_CHANGED_COMBINATION) | 
|  | key->type = old_key_type; | 
|  | else | 
|  | key->type = type; | 
|  |  | 
|  | if (persistent) | 
|  | *persistent = hci_persistent_key(hdev, conn, type, | 
|  | old_key_type); | 
|  |  | 
|  | return key; | 
|  | } | 
|  |  | 
|  | struct smp_ltk *hci_add_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 addr_type, u8 type, u8 authenticated, | 
|  | u8 tk[16], u8 enc_size, __le16 ediv, __le64 rand) | 
|  | { | 
|  | struct smp_ltk *key, *old_key; | 
|  | u8 role = ltk_role(type); | 
|  |  | 
|  | old_key = hci_find_ltk(hdev, bdaddr, addr_type, role); | 
|  | if (old_key) | 
|  | key = old_key; | 
|  | else { | 
|  | key = kzalloc(sizeof(*key), GFP_KERNEL); | 
|  | if (!key) | 
|  | return NULL; | 
|  | list_add_rcu(&key->list, &hdev->long_term_keys); | 
|  | } | 
|  |  | 
|  | bacpy(&key->bdaddr, bdaddr); | 
|  | key->bdaddr_type = addr_type; | 
|  | memcpy(key->val, tk, sizeof(key->val)); | 
|  | key->authenticated = authenticated; | 
|  | key->ediv = ediv; | 
|  | key->rand = rand; | 
|  | key->enc_size = enc_size; | 
|  | key->type = type; | 
|  |  | 
|  | return key; | 
|  | } | 
|  |  | 
|  | struct smp_irk *hci_add_irk(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 addr_type, u8 val[16], bdaddr_t *rpa) | 
|  | { | 
|  | struct smp_irk *irk; | 
|  |  | 
|  | irk = hci_find_irk_by_addr(hdev, bdaddr, addr_type); | 
|  | if (!irk) { | 
|  | irk = kzalloc(sizeof(*irk), GFP_KERNEL); | 
|  | if (!irk) | 
|  | return NULL; | 
|  |  | 
|  | bacpy(&irk->bdaddr, bdaddr); | 
|  | irk->addr_type = addr_type; | 
|  |  | 
|  | list_add_rcu(&irk->list, &hdev->identity_resolving_keys); | 
|  | } | 
|  |  | 
|  | memcpy(irk->val, val, 16); | 
|  | bacpy(&irk->rpa, rpa); | 
|  |  | 
|  | return irk; | 
|  | } | 
|  |  | 
|  | int hci_remove_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr) | 
|  | { | 
|  | struct link_key *key; | 
|  |  | 
|  | key = hci_find_link_key(hdev, bdaddr); | 
|  | if (!key) | 
|  | return -ENOENT; | 
|  |  | 
|  | BT_DBG("%s removing %pMR", hdev->name, bdaddr); | 
|  |  | 
|  | list_del_rcu(&key->list); | 
|  | kfree_rcu(key, rcu); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int hci_remove_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 bdaddr_type) | 
|  | { | 
|  | struct smp_ltk *k; | 
|  | int removed = 0; | 
|  |  | 
|  | list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { | 
|  | if (bacmp(bdaddr, &k->bdaddr) || k->bdaddr_type != bdaddr_type) | 
|  | continue; | 
|  |  | 
|  | BT_DBG("%s removing %pMR", hdev->name, bdaddr); | 
|  |  | 
|  | list_del_rcu(&k->list); | 
|  | kfree_rcu(k, rcu); | 
|  | removed++; | 
|  | } | 
|  |  | 
|  | return removed ? 0 : -ENOENT; | 
|  | } | 
|  |  | 
|  | void hci_remove_irk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 addr_type) | 
|  | { | 
|  | struct smp_irk *k; | 
|  |  | 
|  | list_for_each_entry_rcu(k, &hdev->identity_resolving_keys, list) { | 
|  | if (bacmp(bdaddr, &k->bdaddr) || k->addr_type != addr_type) | 
|  | continue; | 
|  |  | 
|  | BT_DBG("%s removing %pMR", hdev->name, bdaddr); | 
|  |  | 
|  | list_del_rcu(&k->list); | 
|  | kfree_rcu(k, rcu); | 
|  | } | 
|  | } | 
|  |  | 
|  | bool hci_bdaddr_is_paired(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type) | 
|  | { | 
|  | struct smp_ltk *k; | 
|  | struct smp_irk *irk; | 
|  | u8 addr_type; | 
|  |  | 
|  | if (type == BDADDR_BREDR) { | 
|  | if (hci_find_link_key(hdev, bdaddr)) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* Convert to HCI addr type which struct smp_ltk uses */ | 
|  | if (type == BDADDR_LE_PUBLIC) | 
|  | addr_type = ADDR_LE_DEV_PUBLIC; | 
|  | else | 
|  | addr_type = ADDR_LE_DEV_RANDOM; | 
|  |  | 
|  | irk = hci_get_irk(hdev, bdaddr, addr_type); | 
|  | if (irk) { | 
|  | bdaddr = &irk->bdaddr; | 
|  | addr_type = irk->addr_type; | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { | 
|  | if (k->bdaddr_type == addr_type && !bacmp(bdaddr, &k->bdaddr)) { | 
|  | rcu_read_unlock(); | 
|  | return true; | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* HCI command timer function */ | 
|  | static void hci_cmd_timeout(struct work_struct *work) | 
|  | { | 
|  | struct hci_dev *hdev = container_of(work, struct hci_dev, | 
|  | cmd_timer.work); | 
|  |  | 
|  | if (hdev->sent_cmd) { | 
|  | struct hci_command_hdr *sent = (void *) hdev->sent_cmd->data; | 
|  | u16 opcode = __le16_to_cpu(sent->opcode); | 
|  |  | 
|  | BT_ERR("%s command 0x%4.4x tx timeout", hdev->name, opcode); | 
|  | } else { | 
|  | BT_ERR("%s command tx timeout", hdev->name); | 
|  | } | 
|  |  | 
|  | atomic_set(&hdev->cmd_cnt, 1); | 
|  | queue_work(hdev->workqueue, &hdev->cmd_work); | 
|  | } | 
|  |  | 
|  | struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev, | 
|  | bdaddr_t *bdaddr, u8 bdaddr_type) | 
|  | { | 
|  | struct oob_data *data; | 
|  |  | 
|  | list_for_each_entry(data, &hdev->remote_oob_data, list) { | 
|  | if (bacmp(bdaddr, &data->bdaddr) != 0) | 
|  | continue; | 
|  | if (data->bdaddr_type != bdaddr_type) | 
|  | continue; | 
|  | return data; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 bdaddr_type) | 
|  | { | 
|  | struct oob_data *data; | 
|  |  | 
|  | data = hci_find_remote_oob_data(hdev, bdaddr, bdaddr_type); | 
|  | if (!data) | 
|  | return -ENOENT; | 
|  |  | 
|  | BT_DBG("%s removing %pMR (%u)", hdev->name, bdaddr, bdaddr_type); | 
|  |  | 
|  | list_del(&data->list); | 
|  | kfree(data); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void hci_remote_oob_data_clear(struct hci_dev *hdev) | 
|  | { | 
|  | struct oob_data *data, *n; | 
|  |  | 
|  | list_for_each_entry_safe(data, n, &hdev->remote_oob_data, list) { | 
|  | list_del(&data->list); | 
|  | kfree(data); | 
|  | } | 
|  | } | 
|  |  | 
|  | int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 bdaddr_type, u8 *hash192, u8 *rand192, | 
|  | u8 *hash256, u8 *rand256) | 
|  | { | 
|  | struct oob_data *data; | 
|  |  | 
|  | data = hci_find_remote_oob_data(hdev, bdaddr, bdaddr_type); | 
|  | if (!data) { | 
|  | data = kmalloc(sizeof(*data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | bacpy(&data->bdaddr, bdaddr); | 
|  | data->bdaddr_type = bdaddr_type; | 
|  | list_add(&data->list, &hdev->remote_oob_data); | 
|  | } | 
|  |  | 
|  | if (hash192 && rand192) { | 
|  | memcpy(data->hash192, hash192, sizeof(data->hash192)); | 
|  | memcpy(data->rand192, rand192, sizeof(data->rand192)); | 
|  | if (hash256 && rand256) | 
|  | data->present = 0x03; | 
|  | } else { | 
|  | memset(data->hash192, 0, sizeof(data->hash192)); | 
|  | memset(data->rand192, 0, sizeof(data->rand192)); | 
|  | if (hash256 && rand256) | 
|  | data->present = 0x02; | 
|  | else | 
|  | data->present = 0x00; | 
|  | } | 
|  |  | 
|  | if (hash256 && rand256) { | 
|  | memcpy(data->hash256, hash256, sizeof(data->hash256)); | 
|  | memcpy(data->rand256, rand256, sizeof(data->rand256)); | 
|  | } else { | 
|  | memset(data->hash256, 0, sizeof(data->hash256)); | 
|  | memset(data->rand256, 0, sizeof(data->rand256)); | 
|  | if (hash192 && rand192) | 
|  | data->present = 0x01; | 
|  | } | 
|  |  | 
|  | BT_DBG("%s for %pMR", hdev->name, bdaddr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | struct adv_info *hci_find_adv_instance(struct hci_dev *hdev, u8 instance) | 
|  | { | 
|  | struct adv_info *adv_instance; | 
|  |  | 
|  | list_for_each_entry(adv_instance, &hdev->adv_instances, list) { | 
|  | if (adv_instance->instance == instance) | 
|  | return adv_instance; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | struct adv_info *hci_get_next_instance(struct hci_dev *hdev, u8 instance) | 
|  | { | 
|  | struct adv_info *cur_instance; | 
|  |  | 
|  | cur_instance = hci_find_adv_instance(hdev, instance); | 
|  | if (!cur_instance) | 
|  | return NULL; | 
|  |  | 
|  | if (cur_instance == list_last_entry(&hdev->adv_instances, | 
|  | struct adv_info, list)) | 
|  | return list_first_entry(&hdev->adv_instances, | 
|  | struct adv_info, list); | 
|  | else | 
|  | return list_next_entry(cur_instance, list); | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | int hci_remove_adv_instance(struct hci_dev *hdev, u8 instance) | 
|  | { | 
|  | struct adv_info *adv_instance; | 
|  |  | 
|  | adv_instance = hci_find_adv_instance(hdev, instance); | 
|  | if (!adv_instance) | 
|  | return -ENOENT; | 
|  |  | 
|  | BT_DBG("%s removing %dMR", hdev->name, instance); | 
|  |  | 
|  | if (hdev->cur_adv_instance == instance) { | 
|  | if (hdev->adv_instance_timeout) { | 
|  | cancel_delayed_work(&hdev->adv_instance_expire); | 
|  | hdev->adv_instance_timeout = 0; | 
|  | } | 
|  | hdev->cur_adv_instance = 0x00; | 
|  | } | 
|  |  | 
|  | list_del(&adv_instance->list); | 
|  | kfree(adv_instance); | 
|  |  | 
|  | hdev->adv_instance_cnt--; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | void hci_adv_instances_clear(struct hci_dev *hdev) | 
|  | { | 
|  | struct adv_info *adv_instance, *n; | 
|  |  | 
|  | if (hdev->adv_instance_timeout) { | 
|  | cancel_delayed_work(&hdev->adv_instance_expire); | 
|  | hdev->adv_instance_timeout = 0; | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(adv_instance, n, &hdev->adv_instances, list) { | 
|  | list_del(&adv_instance->list); | 
|  | kfree(adv_instance); | 
|  | } | 
|  |  | 
|  | hdev->adv_instance_cnt = 0; | 
|  | hdev->cur_adv_instance = 0x00; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | int hci_add_adv_instance(struct hci_dev *hdev, u8 instance, u32 flags, | 
|  | u16 adv_data_len, u8 *adv_data, | 
|  | u16 scan_rsp_len, u8 *scan_rsp_data, | 
|  | u16 timeout, u16 duration) | 
|  | { | 
|  | struct adv_info *adv_instance; | 
|  |  | 
|  | adv_instance = hci_find_adv_instance(hdev, instance); | 
|  | if (adv_instance) { | 
|  | memset(adv_instance->adv_data, 0, | 
|  | sizeof(adv_instance->adv_data)); | 
|  | memset(adv_instance->scan_rsp_data, 0, | 
|  | sizeof(adv_instance->scan_rsp_data)); | 
|  | } else { | 
|  | if (hdev->adv_instance_cnt >= HCI_MAX_ADV_INSTANCES || | 
|  | instance < 1 || instance > HCI_MAX_ADV_INSTANCES) | 
|  | return -EOVERFLOW; | 
|  |  | 
|  | adv_instance = kzalloc(sizeof(*adv_instance), GFP_KERNEL); | 
|  | if (!adv_instance) | 
|  | return -ENOMEM; | 
|  |  | 
|  | adv_instance->pending = true; | 
|  | adv_instance->instance = instance; | 
|  | list_add(&adv_instance->list, &hdev->adv_instances); | 
|  | hdev->adv_instance_cnt++; | 
|  | } | 
|  |  | 
|  | adv_instance->flags = flags; | 
|  | adv_instance->adv_data_len = adv_data_len; | 
|  | adv_instance->scan_rsp_len = scan_rsp_len; | 
|  |  | 
|  | if (adv_data_len) | 
|  | memcpy(adv_instance->adv_data, adv_data, adv_data_len); | 
|  |  | 
|  | if (scan_rsp_len) | 
|  | memcpy(adv_instance->scan_rsp_data, | 
|  | scan_rsp_data, scan_rsp_len); | 
|  |  | 
|  | adv_instance->timeout = timeout; | 
|  | adv_instance->remaining_time = timeout; | 
|  |  | 
|  | if (duration == 0) | 
|  | adv_instance->duration = HCI_DEFAULT_ADV_DURATION; | 
|  | else | 
|  | adv_instance->duration = duration; | 
|  |  | 
|  | BT_DBG("%s for %dMR", hdev->name, instance); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct bdaddr_list *hci_bdaddr_list_lookup(struct list_head *bdaddr_list, | 
|  | bdaddr_t *bdaddr, u8 type) | 
|  | { | 
|  | struct bdaddr_list *b; | 
|  |  | 
|  | list_for_each_entry(b, bdaddr_list, list) { | 
|  | if (!bacmp(&b->bdaddr, bdaddr) && b->bdaddr_type == type) | 
|  | return b; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | void hci_bdaddr_list_clear(struct list_head *bdaddr_list) | 
|  | { | 
|  | struct bdaddr_list *b, *n; | 
|  |  | 
|  | list_for_each_entry_safe(b, n, bdaddr_list, list) { | 
|  | list_del(&b->list); | 
|  | kfree(b); | 
|  | } | 
|  | } | 
|  |  | 
|  | int hci_bdaddr_list_add(struct list_head *list, bdaddr_t *bdaddr, u8 type) | 
|  | { | 
|  | struct bdaddr_list *entry; | 
|  |  | 
|  | if (!bacmp(bdaddr, BDADDR_ANY)) | 
|  | return -EBADF; | 
|  |  | 
|  | if (hci_bdaddr_list_lookup(list, bdaddr, type)) | 
|  | return -EEXIST; | 
|  |  | 
|  | entry = kzalloc(sizeof(*entry), GFP_KERNEL); | 
|  | if (!entry) | 
|  | return -ENOMEM; | 
|  |  | 
|  | bacpy(&entry->bdaddr, bdaddr); | 
|  | entry->bdaddr_type = type; | 
|  |  | 
|  | list_add(&entry->list, list); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int hci_bdaddr_list_del(struct list_head *list, bdaddr_t *bdaddr, u8 type) | 
|  | { | 
|  | struct bdaddr_list *entry; | 
|  |  | 
|  | if (!bacmp(bdaddr, BDADDR_ANY)) { | 
|  | hci_bdaddr_list_clear(list); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | entry = hci_bdaddr_list_lookup(list, bdaddr, type); | 
|  | if (!entry) | 
|  | return -ENOENT; | 
|  |  | 
|  | list_del(&entry->list); | 
|  | kfree(entry); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | struct hci_conn_params *hci_conn_params_lookup(struct hci_dev *hdev, | 
|  | bdaddr_t *addr, u8 addr_type) | 
|  | { | 
|  | struct hci_conn_params *params; | 
|  |  | 
|  | list_for_each_entry(params, &hdev->le_conn_params, list) { | 
|  | if (bacmp(¶ms->addr, addr) == 0 && | 
|  | params->addr_type == addr_type) { | 
|  | return params; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list, | 
|  | bdaddr_t *addr, u8 addr_type) | 
|  | { | 
|  | struct hci_conn_params *param; | 
|  |  | 
|  | list_for_each_entry(param, list, action) { | 
|  | if (bacmp(¶m->addr, addr) == 0 && | 
|  | param->addr_type == addr_type) | 
|  | return param; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | struct hci_conn_params *hci_conn_params_add(struct hci_dev *hdev, | 
|  | bdaddr_t *addr, u8 addr_type) | 
|  | { | 
|  | struct hci_conn_params *params; | 
|  |  | 
|  | params = hci_conn_params_lookup(hdev, addr, addr_type); | 
|  | if (params) | 
|  | return params; | 
|  |  | 
|  | params = kzalloc(sizeof(*params), GFP_KERNEL); | 
|  | if (!params) { | 
|  | BT_ERR("Out of memory"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | bacpy(¶ms->addr, addr); | 
|  | params->addr_type = addr_type; | 
|  |  | 
|  | list_add(¶ms->list, &hdev->le_conn_params); | 
|  | INIT_LIST_HEAD(¶ms->action); | 
|  |  | 
|  | params->conn_min_interval = hdev->le_conn_min_interval; | 
|  | params->conn_max_interval = hdev->le_conn_max_interval; | 
|  | params->conn_latency = hdev->le_conn_latency; | 
|  | params->supervision_timeout = hdev->le_supv_timeout; | 
|  | params->auto_connect = HCI_AUTO_CONN_DISABLED; | 
|  |  | 
|  | BT_DBG("addr %pMR (type %u)", addr, addr_type); | 
|  |  | 
|  | return params; | 
|  | } | 
|  |  | 
|  | static void hci_conn_params_free(struct hci_conn_params *params) | 
|  | { | 
|  | if (params->conn) { | 
|  | hci_conn_drop(params->conn); | 
|  | hci_conn_put(params->conn); | 
|  | } | 
|  |  | 
|  | list_del(¶ms->action); | 
|  | list_del(¶ms->list); | 
|  | kfree(params); | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | void hci_conn_params_del(struct hci_dev *hdev, bdaddr_t *addr, u8 addr_type) | 
|  | { | 
|  | struct hci_conn_params *params; | 
|  |  | 
|  | params = hci_conn_params_lookup(hdev, addr, addr_type); | 
|  | if (!params) | 
|  | return; | 
|  |  | 
|  | hci_conn_params_free(params); | 
|  |  | 
|  | hci_update_background_scan(hdev); | 
|  |  | 
|  | BT_DBG("addr %pMR (type %u)", addr, addr_type); | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | void hci_conn_params_clear_disabled(struct hci_dev *hdev) | 
|  | { | 
|  | struct hci_conn_params *params, *tmp; | 
|  |  | 
|  | list_for_each_entry_safe(params, tmp, &hdev->le_conn_params, list) { | 
|  | if (params->auto_connect != HCI_AUTO_CONN_DISABLED) | 
|  | continue; | 
|  |  | 
|  | /* If trying to estabilish one time connection to disabled | 
|  | * device, leave the params, but mark them as just once. | 
|  | */ | 
|  | if (params->explicit_connect) { | 
|  | params->auto_connect = HCI_AUTO_CONN_EXPLICIT; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | list_del(¶ms->list); | 
|  | kfree(params); | 
|  | } | 
|  |  | 
|  | BT_DBG("All LE disabled connection parameters were removed"); | 
|  | } | 
|  |  | 
|  | /* This function requires the caller holds hdev->lock */ | 
|  | static void hci_conn_params_clear_all(struct hci_dev *hdev) | 
|  | { | 
|  | struct hci_conn_params *params, *tmp; | 
|  |  | 
|  | list_for_each_entry_safe(params, tmp, &hdev->le_conn_params, list) | 
|  | hci_conn_params_free(params); | 
|  |  | 
|  | BT_DBG("All LE connection parameters were removed"); | 
|  | } | 
|  |  | 
|  | /* Copy the Identity Address of the controller. | 
|  | * | 
|  | * If the controller has a public BD_ADDR, then by default use that one. | 
|  | * If this is a LE only controller without a public address, default to | 
|  | * the static random address. | 
|  | * | 
|  | * For debugging purposes it is possible to force controllers with a | 
|  | * public address to use the static random address instead. | 
|  | * | 
|  | * In case BR/EDR has been disabled on a dual-mode controller and | 
|  | * userspace has configured a static address, then that address | 
|  | * becomes the identity address instead of the public BR/EDR address. | 
|  | */ | 
|  | void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr, | 
|  | u8 *bdaddr_type) | 
|  | { | 
|  | if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) || | 
|  | !bacmp(&hdev->bdaddr, BDADDR_ANY) || | 
|  | (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) && | 
|  | bacmp(&hdev->static_addr, BDADDR_ANY))) { | 
|  | bacpy(bdaddr, &hdev->static_addr); | 
|  | *bdaddr_type = ADDR_LE_DEV_RANDOM; | 
|  | } else { | 
|  | bacpy(bdaddr, &hdev->bdaddr); | 
|  | *bdaddr_type = ADDR_LE_DEV_PUBLIC; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Alloc HCI device */ | 
|  | struct hci_dev *hci_alloc_dev(void) | 
|  | { | 
|  | struct hci_dev *hdev; | 
|  |  | 
|  | hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); | 
|  | if (!hdev) | 
|  | return NULL; | 
|  |  | 
|  | hdev->pkt_type  = (HCI_DM1 | HCI_DH1 | HCI_HV1); | 
|  | hdev->esco_type = (ESCO_HV1); | 
|  | hdev->link_mode = (HCI_LM_ACCEPT); | 
|  | hdev->num_iac = 0x01;		/* One IAC support is mandatory */ | 
|  | hdev->io_capability = 0x03;	/* No Input No Output */ | 
|  | hdev->manufacturer = 0xffff;	/* Default to internal use */ | 
|  | hdev->inq_tx_power = HCI_TX_POWER_INVALID; | 
|  | hdev->adv_tx_power = HCI_TX_POWER_INVALID; | 
|  | hdev->adv_instance_cnt = 0; | 
|  | hdev->cur_adv_instance = 0x00; | 
|  | hdev->adv_instance_timeout = 0; | 
|  |  | 
|  | hdev->sniff_max_interval = 800; | 
|  | hdev->sniff_min_interval = 80; | 
|  |  | 
|  | hdev->le_adv_channel_map = 0x07; | 
|  | hdev->le_adv_min_interval = 0x0800; | 
|  | hdev->le_adv_max_interval = 0x0800; | 
|  | hdev->le_scan_interval = 0x0060; | 
|  | hdev->le_scan_window = 0x0030; | 
|  | hdev->le_conn_min_interval = 0x0028; | 
|  | hdev->le_conn_max_interval = 0x0038; | 
|  | hdev->le_conn_latency = 0x0000; | 
|  | hdev->le_supv_timeout = 0x002a; | 
|  | hdev->le_def_tx_len = 0x001b; | 
|  | hdev->le_def_tx_time = 0x0148; | 
|  | hdev->le_max_tx_len = 0x001b; | 
|  | hdev->le_max_tx_time = 0x0148; | 
|  | hdev->le_max_rx_len = 0x001b; | 
|  | hdev->le_max_rx_time = 0x0148; | 
|  |  | 
|  | hdev->rpa_timeout = HCI_DEFAULT_RPA_TIMEOUT; | 
|  | hdev->discov_interleaved_timeout = DISCOV_INTERLEAVED_TIMEOUT; | 
|  | hdev->conn_info_min_age = DEFAULT_CONN_INFO_MIN_AGE; | 
|  | hdev->conn_info_max_age = DEFAULT_CONN_INFO_MAX_AGE; | 
|  |  | 
|  | mutex_init(&hdev->lock); | 
|  | mutex_init(&hdev->req_lock); | 
|  |  | 
|  | INIT_LIST_HEAD(&hdev->mgmt_pending); | 
|  | INIT_LIST_HEAD(&hdev->blacklist); | 
|  | INIT_LIST_HEAD(&hdev->whitelist); | 
|  | INIT_LIST_HEAD(&hdev->uuids); | 
|  | INIT_LIST_HEAD(&hdev->link_keys); | 
|  | INIT_LIST_HEAD(&hdev->long_term_keys); | 
|  | INIT_LIST_HEAD(&hdev->identity_resolving_keys); | 
|  | INIT_LIST_HEAD(&hdev->remote_oob_data); | 
|  | INIT_LIST_HEAD(&hdev->le_white_list); | 
|  | INIT_LIST_HEAD(&hdev->le_conn_params); | 
|  | INIT_LIST_HEAD(&hdev->pend_le_conns); | 
|  | INIT_LIST_HEAD(&hdev->pend_le_reports); | 
|  | INIT_LIST_HEAD(&hdev->conn_hash.list); | 
|  | INIT_LIST_HEAD(&hdev->adv_instances); | 
|  |  | 
|  | INIT_WORK(&hdev->rx_work, hci_rx_work); | 
|  | INIT_WORK(&hdev->cmd_work, hci_cmd_work); | 
|  | INIT_WORK(&hdev->tx_work, hci_tx_work); | 
|  | INIT_WORK(&hdev->power_on, hci_power_on); | 
|  | INIT_WORK(&hdev->error_reset, hci_error_reset); | 
|  |  | 
|  | INIT_DELAYED_WORK(&hdev->power_off, hci_power_off); | 
|  |  | 
|  | skb_queue_head_init(&hdev->rx_q); | 
|  | skb_queue_head_init(&hdev->cmd_q); | 
|  | skb_queue_head_init(&hdev->raw_q); | 
|  |  | 
|  | init_waitqueue_head(&hdev->req_wait_q); | 
|  |  | 
|  | INIT_DELAYED_WORK(&hdev->cmd_timer, hci_cmd_timeout); | 
|  |  | 
|  | hci_request_setup(hdev); | 
|  |  | 
|  | hci_init_sysfs(hdev); | 
|  | discovery_init(hdev); | 
|  |  | 
|  | return hdev; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_alloc_dev); | 
|  |  | 
|  | /* Free HCI device */ | 
|  | void hci_free_dev(struct hci_dev *hdev) | 
|  | { | 
|  | /* will free via device release */ | 
|  | put_device(&hdev->dev); | 
|  | } | 
|  | EXPORT_SYMBOL(hci_free_dev); | 
|  |  | 
|  | /* Register HCI device */ | 
|  | int hci_register_dev(struct hci_dev *hdev) | 
|  | { | 
|  | int id, error; | 
|  |  | 
|  | if (!hdev->open || !hdev->close || !hdev->send) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Do not allow HCI_AMP devices to register at index 0, | 
|  | * so the index can be used as the AMP controller ID. | 
|  | */ | 
|  | switch (hdev->dev_type) { | 
|  | case HCI_PRIMARY: | 
|  | id = ida_simple_get(&hci_index_ida, 0, 0, GFP_KERNEL); | 
|  | break; | 
|  | case HCI_AMP: | 
|  | id = ida_simple_get(&hci_index_ida, 1, 0, GFP_KERNEL); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (id < 0) | 
|  | return id; | 
|  |  | 
|  | sprintf(hdev->name, "hci%d", id); | 
|  | hdev->id = id; | 
|  |  | 
|  | BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus); | 
|  |  | 
|  | hdev->workqueue = alloc_workqueue("%s", WQ_HIGHPRI | WQ_UNBOUND | | 
|  | WQ_MEM_RECLAIM, 1, hdev->name); | 
|  | if (!hdev->workqueue) { | 
|  | error = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | hdev->req_workqueue = alloc_workqueue("%s", WQ_HIGHPRI | WQ_UNBOUND | | 
|  | WQ_MEM_RECLAIM, 1, hdev->name); | 
|  | if (!hdev->req_workqueue) { | 
|  | destroy_workqueue(hdev->workqueue); | 
|  | error = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(bt_debugfs)) | 
|  | hdev->debugfs = debugfs_create_dir(hdev->name, bt_debugfs); | 
|  |  | 
|  | dev_set_name(&hdev->dev, "%s", hdev->name); | 
|  |  | 
|  | error = device_add(&hdev->dev); | 
|  | if (error < 0) | 
|  | goto err_wqueue; | 
|  |  | 
|  | hci_leds_init(hdev); | 
|  |  | 
|  | hdev->rfkill = rfkill_alloc(hdev->name, &hdev->dev, | 
|  | RFKILL_TYPE_BLUETOOTH, &hci_rfkill_ops, | 
|  | hdev); | 
|  | if (hdev->rfkill) { | 
|  | if (rfkill_register(hdev->rfkill) < 0) { | 
|  | rfkill_destroy(hdev->rfkill); | 
|  | hdev->rfkill = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) | 
|  | hci_dev_set_flag(hdev, HCI_RFKILLED); | 
|  |  | 
|  | hci_dev_set_flag(hdev, HCI_SETUP); | 
|  | hci_dev_set_flag(hdev, HCI_AUTO_OFF); | 
|  |  | 
|  | if (hdev->dev_type == HCI_PRIMARY) { | 
|  | /* Assume BR/EDR support until proven otherwise (such as | 
|  | * through reading supported features during init. | 
|  | */ | 
|  | hci_dev_set_flag(hdev, HCI_BREDR_ENABLED); | 
|  | } | 
|  |  | 
|  | write_lock(&hci_dev_list_lock); | 
|  | list_add(&hdev->list, &hci_dev_list); | 
|  | write_unlock(&hci_dev_list_lock); | 
|  |  | 
|  | /* Devices that are marked for raw-only usage are unconfigured | 
|  | * and should not be included in normal operation. | 
|  | */ | 
|  | if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) | 
|  | hci_dev_set_flag(hdev, HCI_UNCONFIGURED); | 
|  |  | 
|  | hci_sock_dev_event(hdev, HCI_DEV_REG); | 
|  | hci_dev_hold(hdev); | 
|  |  | 
|  | queue_work(hdev->req_workqueue, &hdev->power_on); | 
|  |  | 
|  | return id; | 
|  |  | 
|  | err_wqueue: | 
|  | destroy_workqueue(hdev->workqueue); | 
|  | destroy_workqueue(hdev->req_workqueue); | 
|  | err: | 
|  | ida_simple_remove(&hci_index_ida, hdev->id); | 
|  |  | 
|  | return error; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_register_dev); | 
|  |  | 
|  | /* Unregister HCI device */ | 
|  | void hci_unregister_dev(struct hci_dev *hdev) | 
|  | { | 
|  | int id; | 
|  |  | 
|  | BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus); | 
|  |  | 
|  | hci_dev_set_flag(hdev, HCI_UNREGISTER); | 
|  |  | 
|  | id = hdev->id; | 
|  |  | 
|  | write_lock(&hci_dev_list_lock); | 
|  | list_del(&hdev->list); | 
|  | write_unlock(&hci_dev_list_lock); | 
|  |  | 
|  | cancel_work_sync(&hdev->power_on); | 
|  |  | 
|  | hci_dev_do_close(hdev); | 
|  |  | 
|  | if (!test_bit(HCI_INIT, &hdev->flags) && | 
|  | !hci_dev_test_flag(hdev, HCI_SETUP) && | 
|  | !hci_dev_test_flag(hdev, HCI_CONFIG)) { | 
|  | hci_dev_lock(hdev); | 
|  | mgmt_index_removed(hdev); | 
|  | hci_dev_unlock(hdev); | 
|  | } | 
|  |  | 
|  | /* mgmt_index_removed should take care of emptying the | 
|  | * pending list */ | 
|  | BUG_ON(!list_empty(&hdev->mgmt_pending)); | 
|  |  | 
|  | hci_sock_dev_event(hdev, HCI_DEV_UNREG); | 
|  |  | 
|  | if (hdev->rfkill) { | 
|  | rfkill_unregister(hdev->rfkill); | 
|  | rfkill_destroy(hdev->rfkill); | 
|  | } | 
|  |  | 
|  | device_del(&hdev->dev); | 
|  |  | 
|  | debugfs_remove_recursive(hdev->debugfs); | 
|  | kfree_const(hdev->hw_info); | 
|  | kfree_const(hdev->fw_info); | 
|  |  | 
|  | destroy_workqueue(hdev->workqueue); | 
|  | destroy_workqueue(hdev->req_workqueue); | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | hci_bdaddr_list_clear(&hdev->blacklist); | 
|  | hci_bdaddr_list_clear(&hdev->whitelist); | 
|  | hci_uuids_clear(hdev); | 
|  | hci_link_keys_clear(hdev); | 
|  | hci_smp_ltks_clear(hdev); | 
|  | hci_smp_irks_clear(hdev); | 
|  | hci_remote_oob_data_clear(hdev); | 
|  | hci_adv_instances_clear(hdev); | 
|  | hci_bdaddr_list_clear(&hdev->le_white_list); | 
|  | hci_conn_params_clear_all(hdev); | 
|  | hci_discovery_filter_clear(hdev); | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | hci_dev_put(hdev); | 
|  |  | 
|  | ida_simple_remove(&hci_index_ida, id); | 
|  | } | 
|  | EXPORT_SYMBOL(hci_unregister_dev); | 
|  |  | 
|  | /* Suspend HCI device */ | 
|  | int hci_suspend_dev(struct hci_dev *hdev) | 
|  | { | 
|  | hci_sock_dev_event(hdev, HCI_DEV_SUSPEND); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_suspend_dev); | 
|  |  | 
|  | /* Resume HCI device */ | 
|  | int hci_resume_dev(struct hci_dev *hdev) | 
|  | { | 
|  | hci_sock_dev_event(hdev, HCI_DEV_RESUME); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_resume_dev); | 
|  |  | 
|  | /* Reset HCI device */ | 
|  | int hci_reset_dev(struct hci_dev *hdev) | 
|  | { | 
|  | const u8 hw_err[] = { HCI_EV_HARDWARE_ERROR, 0x01, 0x00 }; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = bt_skb_alloc(3, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hci_skb_pkt_type(skb) = HCI_EVENT_PKT; | 
|  | memcpy(skb_put(skb, 3), hw_err, 3); | 
|  |  | 
|  | /* Send Hardware Error to upper stack */ | 
|  | return hci_recv_frame(hdev, skb); | 
|  | } | 
|  | EXPORT_SYMBOL(hci_reset_dev); | 
|  |  | 
|  | /* Receive frame from HCI drivers */ | 
|  | int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | if (!hdev || (!test_bit(HCI_UP, &hdev->flags) | 
|  | && !test_bit(HCI_INIT, &hdev->flags))) { | 
|  | kfree_skb(skb); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | if (hci_skb_pkt_type(skb) != HCI_EVENT_PKT && | 
|  | hci_skb_pkt_type(skb) != HCI_ACLDATA_PKT && | 
|  | hci_skb_pkt_type(skb) != HCI_SCODATA_PKT) { | 
|  | kfree_skb(skb); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Incoming skb */ | 
|  | bt_cb(skb)->incoming = 1; | 
|  |  | 
|  | /* Time stamp */ | 
|  | __net_timestamp(skb); | 
|  |  | 
|  | skb_queue_tail(&hdev->rx_q, skb); | 
|  | queue_work(hdev->workqueue, &hdev->rx_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_recv_frame); | 
|  |  | 
|  | /* Receive diagnostic message from HCI drivers */ | 
|  | int hci_recv_diag(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | /* Mark as diagnostic packet */ | 
|  | hci_skb_pkt_type(skb) = HCI_DIAG_PKT; | 
|  |  | 
|  | /* Time stamp */ | 
|  | __net_timestamp(skb); | 
|  |  | 
|  | skb_queue_tail(&hdev->rx_q, skb); | 
|  | queue_work(hdev->workqueue, &hdev->rx_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_recv_diag); | 
|  |  | 
|  | void hci_set_hw_info(struct hci_dev *hdev, const char *fmt, ...) | 
|  | { | 
|  | va_list vargs; | 
|  |  | 
|  | va_start(vargs, fmt); | 
|  | kfree_const(hdev->hw_info); | 
|  | hdev->hw_info = kvasprintf_const(GFP_KERNEL, fmt, vargs); | 
|  | va_end(vargs); | 
|  | } | 
|  | EXPORT_SYMBOL(hci_set_hw_info); | 
|  |  | 
|  | void hci_set_fw_info(struct hci_dev *hdev, const char *fmt, ...) | 
|  | { | 
|  | va_list vargs; | 
|  |  | 
|  | va_start(vargs, fmt); | 
|  | kfree_const(hdev->fw_info); | 
|  | hdev->fw_info = kvasprintf_const(GFP_KERNEL, fmt, vargs); | 
|  | va_end(vargs); | 
|  | } | 
|  | EXPORT_SYMBOL(hci_set_fw_info); | 
|  |  | 
|  | /* ---- Interface to upper protocols ---- */ | 
|  |  | 
|  | int hci_register_cb(struct hci_cb *cb) | 
|  | { | 
|  | BT_DBG("%p name %s", cb, cb->name); | 
|  |  | 
|  | mutex_lock(&hci_cb_list_lock); | 
|  | list_add_tail(&cb->list, &hci_cb_list); | 
|  | mutex_unlock(&hci_cb_list_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_register_cb); | 
|  |  | 
|  | int hci_unregister_cb(struct hci_cb *cb) | 
|  | { | 
|  | BT_DBG("%p name %s", cb, cb->name); | 
|  |  | 
|  | mutex_lock(&hci_cb_list_lock); | 
|  | list_del(&cb->list); | 
|  | mutex_unlock(&hci_cb_list_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_unregister_cb); | 
|  |  | 
|  | static void hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | BT_DBG("%s type %d len %d", hdev->name, hci_skb_pkt_type(skb), | 
|  | skb->len); | 
|  |  | 
|  | /* Time stamp */ | 
|  | __net_timestamp(skb); | 
|  |  | 
|  | /* Send copy to monitor */ | 
|  | hci_send_to_monitor(hdev, skb); | 
|  |  | 
|  | if (atomic_read(&hdev->promisc)) { | 
|  | /* Send copy to the sockets */ | 
|  | hci_send_to_sock(hdev, skb); | 
|  | } | 
|  |  | 
|  | /* Get rid of skb owner, prior to sending to the driver. */ | 
|  | skb_orphan(skb); | 
|  |  | 
|  | if (!test_bit(HCI_RUNNING, &hdev->flags)) { | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | err = hdev->send(hdev, skb); | 
|  | if (err < 0) { | 
|  | BT_ERR("%s sending frame failed (%d)", hdev->name, err); | 
|  | kfree_skb(skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Send HCI command */ | 
|  | int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen, | 
|  | const void *param) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | BT_DBG("%s opcode 0x%4.4x plen %d", hdev->name, opcode, plen); | 
|  |  | 
|  | skb = hci_prepare_cmd(hdev, opcode, plen, param); | 
|  | if (!skb) { | 
|  | BT_ERR("%s no memory for command", hdev->name); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Stand-alone HCI commands must be flagged as | 
|  | * single-command requests. | 
|  | */ | 
|  | bt_cb(skb)->hci.req_flags |= HCI_REQ_START; | 
|  |  | 
|  | skb_queue_tail(&hdev->cmd_q, skb); | 
|  | queue_work(hdev->workqueue, &hdev->cmd_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Get data from the previously sent command */ | 
|  | void *hci_sent_cmd_data(struct hci_dev *hdev, __u16 opcode) | 
|  | { | 
|  | struct hci_command_hdr *hdr; | 
|  |  | 
|  | if (!hdev->sent_cmd) | 
|  | return NULL; | 
|  |  | 
|  | hdr = (void *) hdev->sent_cmd->data; | 
|  |  | 
|  | if (hdr->opcode != cpu_to_le16(opcode)) | 
|  | return NULL; | 
|  |  | 
|  | BT_DBG("%s opcode 0x%4.4x", hdev->name, opcode); | 
|  |  | 
|  | return hdev->sent_cmd->data + HCI_COMMAND_HDR_SIZE; | 
|  | } | 
|  |  | 
|  | /* Send HCI command and wait for command commplete event */ | 
|  | struct sk_buff *hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen, | 
|  | const void *param, u32 timeout) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (!test_bit(HCI_UP, &hdev->flags)) | 
|  | return ERR_PTR(-ENETDOWN); | 
|  |  | 
|  | bt_dev_dbg(hdev, "opcode 0x%4.4x plen %d", opcode, plen); | 
|  |  | 
|  | hci_req_sync_lock(hdev); | 
|  | skb = __hci_cmd_sync(hdev, opcode, plen, param, timeout); | 
|  | hci_req_sync_unlock(hdev); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  | EXPORT_SYMBOL(hci_cmd_sync); | 
|  |  | 
|  | /* Send ACL data */ | 
|  | static void hci_add_acl_hdr(struct sk_buff *skb, __u16 handle, __u16 flags) | 
|  | { | 
|  | struct hci_acl_hdr *hdr; | 
|  | int len = skb->len; | 
|  |  | 
|  | skb_push(skb, HCI_ACL_HDR_SIZE); | 
|  | skb_reset_transport_header(skb); | 
|  | hdr = (struct hci_acl_hdr *)skb_transport_header(skb); | 
|  | hdr->handle = cpu_to_le16(hci_handle_pack(handle, flags)); | 
|  | hdr->dlen   = cpu_to_le16(len); | 
|  | } | 
|  |  | 
|  | static void hci_queue_acl(struct hci_chan *chan, struct sk_buff_head *queue, | 
|  | struct sk_buff *skb, __u16 flags) | 
|  | { | 
|  | struct hci_conn *conn = chan->conn; | 
|  | struct hci_dev *hdev = conn->hdev; | 
|  | struct sk_buff *list; | 
|  |  | 
|  | skb->len = skb_headlen(skb); | 
|  | skb->data_len = 0; | 
|  |  | 
|  | hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT; | 
|  |  | 
|  | switch (hdev->dev_type) { | 
|  | case HCI_PRIMARY: | 
|  | hci_add_acl_hdr(skb, conn->handle, flags); | 
|  | break; | 
|  | case HCI_AMP: | 
|  | hci_add_acl_hdr(skb, chan->handle, flags); | 
|  | break; | 
|  | default: | 
|  | BT_ERR("%s unknown dev_type %d", hdev->name, hdev->dev_type); | 
|  | return; | 
|  | } | 
|  |  | 
|  | list = skb_shinfo(skb)->frag_list; | 
|  | if (!list) { | 
|  | /* Non fragmented */ | 
|  | BT_DBG("%s nonfrag skb %p len %d", hdev->name, skb, skb->len); | 
|  |  | 
|  | skb_queue_tail(queue, skb); | 
|  | } else { | 
|  | /* Fragmented */ | 
|  | BT_DBG("%s frag %p len %d", hdev->name, skb, skb->len); | 
|  |  | 
|  | skb_shinfo(skb)->frag_list = NULL; | 
|  |  | 
|  | /* Queue all fragments atomically. We need to use spin_lock_bh | 
|  | * here because of 6LoWPAN links, as there this function is | 
|  | * called from softirq and using normal spin lock could cause | 
|  | * deadlocks. | 
|  | */ | 
|  | spin_lock_bh(&queue->lock); | 
|  |  | 
|  | __skb_queue_tail(queue, skb); | 
|  |  | 
|  | flags &= ~ACL_START; | 
|  | flags |= ACL_CONT; | 
|  | do { | 
|  | skb = list; list = list->next; | 
|  |  | 
|  | hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT; | 
|  | hci_add_acl_hdr(skb, conn->handle, flags); | 
|  |  | 
|  | BT_DBG("%s frag %p len %d", hdev->name, skb, skb->len); | 
|  |  | 
|  | __skb_queue_tail(queue, skb); | 
|  | } while (list); | 
|  |  | 
|  | spin_unlock_bh(&queue->lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | void hci_send_acl(struct hci_chan *chan, struct sk_buff *skb, __u16 flags) | 
|  | { | 
|  | struct hci_dev *hdev = chan->conn->hdev; | 
|  |  | 
|  | BT_DBG("%s chan %p flags 0x%4.4x", hdev->name, chan, flags); | 
|  |  | 
|  | hci_queue_acl(chan, &chan->data_q, skb, flags); | 
|  |  | 
|  | queue_work(hdev->workqueue, &hdev->tx_work); | 
|  | } | 
|  |  | 
|  | /* Send SCO data */ | 
|  | void hci_send_sco(struct hci_conn *conn, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_dev *hdev = conn->hdev; | 
|  | struct hci_sco_hdr hdr; | 
|  |  | 
|  | BT_DBG("%s len %d", hdev->name, skb->len); | 
|  |  | 
|  | hdr.handle = cpu_to_le16(conn->handle); | 
|  | hdr.dlen   = skb->len; | 
|  |  | 
|  | skb_push(skb, HCI_SCO_HDR_SIZE); | 
|  | skb_reset_transport_header(skb); | 
|  | memcpy(skb_transport_header(skb), &hdr, HCI_SCO_HDR_SIZE); | 
|  |  | 
|  | hci_skb_pkt_type(skb) = HCI_SCODATA_PKT; | 
|  |  | 
|  | skb_queue_tail(&conn->data_q, skb); | 
|  | queue_work(hdev->workqueue, &hdev->tx_work); | 
|  | } | 
|  |  | 
|  | /* ---- HCI TX task (outgoing data) ---- */ | 
|  |  | 
|  | /* HCI Connection scheduler */ | 
|  | static struct hci_conn *hci_low_sent(struct hci_dev *hdev, __u8 type, | 
|  | int *quote) | 
|  | { | 
|  | struct hci_conn_hash *h = &hdev->conn_hash; | 
|  | struct hci_conn *conn = NULL, *c; | 
|  | unsigned int num = 0, min = ~0; | 
|  |  | 
|  | /* We don't have to lock device here. Connections are always | 
|  | * added and removed with TX task disabled. */ | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(c, &h->list, list) { | 
|  | if (c->type != type || skb_queue_empty(&c->data_q)) | 
|  | continue; | 
|  |  | 
|  | if (c->state != BT_CONNECTED && c->state != BT_CONFIG) | 
|  | continue; | 
|  |  | 
|  | num++; | 
|  |  | 
|  | if (c->sent < min) { | 
|  | min  = c->sent; | 
|  | conn = c; | 
|  | } | 
|  |  | 
|  | if (hci_conn_num(hdev, type) == num) | 
|  | break; | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (conn) { | 
|  | int cnt, q; | 
|  |  | 
|  | switch (conn->type) { | 
|  | case ACL_LINK: | 
|  | cnt = hdev->acl_cnt; | 
|  | break; | 
|  | case SCO_LINK: | 
|  | case ESCO_LINK: | 
|  | cnt = hdev->sco_cnt; | 
|  | break; | 
|  | case LE_LINK: | 
|  | cnt = hdev->le_mtu ? hdev->le_cnt : hdev->acl_cnt; | 
|  | break; | 
|  | default: | 
|  | cnt = 0; | 
|  | BT_ERR("Unknown link type"); | 
|  | } | 
|  |  | 
|  | q = cnt / num; | 
|  | *quote = q ? q : 1; | 
|  | } else | 
|  | *quote = 0; | 
|  |  | 
|  | BT_DBG("conn %p quote %d", conn, *quote); | 
|  | return conn; | 
|  | } | 
|  |  | 
|  | static void hci_link_tx_to(struct hci_dev *hdev, __u8 type) | 
|  | { | 
|  | struct hci_conn_hash *h = &hdev->conn_hash; | 
|  | struct hci_conn *c; | 
|  |  | 
|  | BT_ERR("%s link tx timeout", hdev->name); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | /* Kill stalled connections */ | 
|  | list_for_each_entry_rcu(c, &h->list, list) { | 
|  | if (c->type == type && c->sent) { | 
|  | BT_ERR("%s killing stalled connection %pMR", | 
|  | hdev->name, &c->dst); | 
|  | hci_disconnect(c, HCI_ERROR_REMOTE_USER_TERM); | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static struct hci_chan *hci_chan_sent(struct hci_dev *hdev, __u8 type, | 
|  | int *quote) | 
|  | { | 
|  | struct hci_conn_hash *h = &hdev->conn_hash; | 
|  | struct hci_chan *chan = NULL; | 
|  | unsigned int num = 0, min = ~0, cur_prio = 0; | 
|  | struct hci_conn *conn; | 
|  | int cnt, q, conn_num = 0; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(conn, &h->list, list) { | 
|  | struct hci_chan *tmp; | 
|  |  | 
|  | if (conn->type != type) | 
|  | continue; | 
|  |  | 
|  | if (conn->state != BT_CONNECTED && conn->state != BT_CONFIG) | 
|  | continue; | 
|  |  | 
|  | conn_num++; | 
|  |  | 
|  | list_for_each_entry_rcu(tmp, &conn->chan_list, list) { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (skb_queue_empty(&tmp->data_q)) | 
|  | continue; | 
|  |  | 
|  | skb = skb_peek(&tmp->data_q); | 
|  | if (skb->priority < cur_prio) | 
|  | continue; | 
|  |  | 
|  | if (skb->priority > cur_prio) { | 
|  | num = 0; | 
|  | min = ~0; | 
|  | cur_prio = skb->priority; | 
|  | } | 
|  |  | 
|  | num++; | 
|  |  | 
|  | if (conn->sent < min) { | 
|  | min  = conn->sent; | 
|  | chan = tmp; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (hci_conn_num(hdev, type) == conn_num) | 
|  | break; | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (!chan) | 
|  | return NULL; | 
|  |  | 
|  | switch (chan->conn->type) { | 
|  | case ACL_LINK: | 
|  | cnt = hdev->acl_cnt; | 
|  | break; | 
|  | case AMP_LINK: | 
|  | cnt = hdev->block_cnt; | 
|  | break; | 
|  | case SCO_LINK: | 
|  | case ESCO_LINK: | 
|  | cnt = hdev->sco_cnt; | 
|  | break; | 
|  | case LE_LINK: | 
|  | cnt = hdev->le_mtu ? hdev->le_cnt : hdev->acl_cnt; | 
|  | break; | 
|  | default: | 
|  | cnt = 0; | 
|  | BT_ERR("Unknown link type"); | 
|  | } | 
|  |  | 
|  | q = cnt / num; | 
|  | *quote = q ? q : 1; | 
|  | BT_DBG("chan %p quote %d", chan, *quote); | 
|  | return chan; | 
|  | } | 
|  |  | 
|  | static void hci_prio_recalculate(struct hci_dev *hdev, __u8 type) | 
|  | { | 
|  | struct hci_conn_hash *h = &hdev->conn_hash; | 
|  | struct hci_conn *conn; | 
|  | int num = 0; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(conn, &h->list, list) { | 
|  | struct hci_chan *chan; | 
|  |  | 
|  | if (conn->type != type) | 
|  | continue; | 
|  |  | 
|  | if (conn->state != BT_CONNECTED && conn->state != BT_CONFIG) | 
|  | continue; | 
|  |  | 
|  | num++; | 
|  |  | 
|  | list_for_each_entry_rcu(chan, &conn->chan_list, list) { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (chan->sent) { | 
|  | chan->sent = 0; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (skb_queue_empty(&chan->data_q)) | 
|  | continue; | 
|  |  | 
|  | skb = skb_peek(&chan->data_q); | 
|  | if (skb->priority >= HCI_PRIO_MAX - 1) | 
|  | continue; | 
|  |  | 
|  | skb->priority = HCI_PRIO_MAX - 1; | 
|  |  | 
|  | BT_DBG("chan %p skb %p promoted to %d", chan, skb, | 
|  | skb->priority); | 
|  | } | 
|  |  | 
|  | if (hci_conn_num(hdev, type) == num) | 
|  | break; | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | } | 
|  |  | 
|  | static inline int __get_blocks(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | /* Calculate count of blocks used by this packet */ | 
|  | return DIV_ROUND_UP(skb->len - HCI_ACL_HDR_SIZE, hdev->block_len); | 
|  | } | 
|  |  | 
|  | static void __check_timeout(struct hci_dev *hdev, unsigned int cnt) | 
|  | { | 
|  | if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | 
|  | /* ACL tx timeout must be longer than maximum | 
|  | * link supervision timeout (40.9 seconds) */ | 
|  | if (!cnt && time_after(jiffies, hdev->acl_last_tx + | 
|  | HCI_ACL_TX_TIMEOUT)) | 
|  | hci_link_tx_to(hdev, ACL_LINK); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_sched_acl_pkt(struct hci_dev *hdev) | 
|  | { | 
|  | unsigned int cnt = hdev->acl_cnt; | 
|  | struct hci_chan *chan; | 
|  | struct sk_buff *skb; | 
|  | int quote; | 
|  |  | 
|  | __check_timeout(hdev, cnt); | 
|  |  | 
|  | while (hdev->acl_cnt && | 
|  | (chan = hci_chan_sent(hdev, ACL_LINK, "e))) { | 
|  | u32 priority = (skb_peek(&chan->data_q))->priority; | 
|  | while (quote-- && (skb = skb_peek(&chan->data_q))) { | 
|  | BT_DBG("chan %p skb %p len %d priority %u", chan, skb, | 
|  | skb->len, skb->priority); | 
|  |  | 
|  | /* Stop if priority has changed */ | 
|  | if (skb->priority < priority) | 
|  | break; | 
|  |  | 
|  | skb = skb_dequeue(&chan->data_q); | 
|  |  | 
|  | hci_conn_enter_active_mode(chan->conn, | 
|  | bt_cb(skb)->force_active); | 
|  |  | 
|  | hci_send_frame(hdev, skb); | 
|  | hdev->acl_last_tx = jiffies; | 
|  |  | 
|  | hdev->acl_cnt--; | 
|  | chan->sent++; | 
|  | chan->conn->sent++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (cnt != hdev->acl_cnt) | 
|  | hci_prio_recalculate(hdev, ACL_LINK); | 
|  | } | 
|  |  | 
|  | static void hci_sched_acl_blk(struct hci_dev *hdev) | 
|  | { | 
|  | unsigned int cnt = hdev->block_cnt; | 
|  | struct hci_chan *chan; | 
|  | struct sk_buff *skb; | 
|  | int quote; | 
|  | u8 type; | 
|  |  | 
|  | __check_timeout(hdev, cnt); | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (hdev->dev_type == HCI_AMP) | 
|  | type = AMP_LINK; | 
|  | else | 
|  | type = ACL_LINK; | 
|  |  | 
|  | while (hdev->block_cnt > 0 && | 
|  | (chan = hci_chan_sent(hdev, type, "e))) { | 
|  | u32 priority = (skb_peek(&chan->data_q))->priority; | 
|  | while (quote > 0 && (skb = skb_peek(&chan->data_q))) { | 
|  | int blocks; | 
|  |  | 
|  | BT_DBG("chan %p skb %p len %d priority %u", chan, skb, | 
|  | skb->len, skb->priority); | 
|  |  | 
|  | /* Stop if priority has changed */ | 
|  | if (skb->priority < priority) | 
|  | break; | 
|  |  | 
|  | skb = skb_dequeue(&chan->data_q); | 
|  |  | 
|  | blocks = __get_blocks(hdev, skb); | 
|  | if (blocks > hdev->block_cnt) | 
|  | return; | 
|  |  | 
|  | hci_conn_enter_active_mode(chan->conn, | 
|  | bt_cb(skb)->force_active); | 
|  |  | 
|  | hci_send_frame(hdev, skb); | 
|  | hdev->acl_last_tx = jiffies; | 
|  |  | 
|  | hdev->block_cnt -= blocks; | 
|  | quote -= blocks; | 
|  |  | 
|  | chan->sent += blocks; | 
|  | chan->conn->sent += blocks; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (cnt != hdev->block_cnt) | 
|  | hci_prio_recalculate(hdev, type); | 
|  | } | 
|  |  | 
|  | static void hci_sched_acl(struct hci_dev *hdev) | 
|  | { | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | /* No ACL link over BR/EDR controller */ | 
|  | if (!hci_conn_num(hdev, ACL_LINK) && hdev->dev_type == HCI_PRIMARY) | 
|  | return; | 
|  |  | 
|  | /* No AMP link over AMP controller */ | 
|  | if (!hci_conn_num(hdev, AMP_LINK) && hdev->dev_type == HCI_AMP) | 
|  | return; | 
|  |  | 
|  | switch (hdev->flow_ctl_mode) { | 
|  | case HCI_FLOW_CTL_MODE_PACKET_BASED: | 
|  | hci_sched_acl_pkt(hdev); | 
|  | break; | 
|  |  | 
|  | case HCI_FLOW_CTL_MODE_BLOCK_BASED: | 
|  | hci_sched_acl_blk(hdev); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Schedule SCO */ | 
|  | static void hci_sched_sco(struct hci_dev *hdev) | 
|  | { | 
|  | struct hci_conn *conn; | 
|  | struct sk_buff *skb; | 
|  | int quote; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!hci_conn_num(hdev, SCO_LINK)) | 
|  | return; | 
|  |  | 
|  | while (hdev->sco_cnt && (conn = hci_low_sent(hdev, SCO_LINK, "e))) { | 
|  | while (quote-- && (skb = skb_dequeue(&conn->data_q))) { | 
|  | BT_DBG("skb %p len %d", skb, skb->len); | 
|  | hci_send_frame(hdev, skb); | 
|  |  | 
|  | conn->sent++; | 
|  | if (conn->sent == ~0) | 
|  | conn->sent = 0; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_sched_esco(struct hci_dev *hdev) | 
|  | { | 
|  | struct hci_conn *conn; | 
|  | struct sk_buff *skb; | 
|  | int quote; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!hci_conn_num(hdev, ESCO_LINK)) | 
|  | return; | 
|  |  | 
|  | while (hdev->sco_cnt && (conn = hci_low_sent(hdev, ESCO_LINK, | 
|  | "e))) { | 
|  | while (quote-- && (skb = skb_dequeue(&conn->data_q))) { | 
|  | BT_DBG("skb %p len %d", skb, skb->len); | 
|  | hci_send_frame(hdev, skb); | 
|  |  | 
|  | conn->sent++; | 
|  | if (conn->sent == ~0) | 
|  | conn->sent = 0; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_sched_le(struct hci_dev *hdev) | 
|  | { | 
|  | struct hci_chan *chan; | 
|  | struct sk_buff *skb; | 
|  | int quote, cnt, tmp; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | if (!hci_conn_num(hdev, LE_LINK)) | 
|  | return; | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | 
|  | /* LE tx timeout must be longer than maximum | 
|  | * link supervision timeout (40.9 seconds) */ | 
|  | if (!hdev->le_cnt && hdev->le_pkts && | 
|  | time_after(jiffies, hdev->le_last_tx + HZ * 45)) | 
|  | hci_link_tx_to(hdev, LE_LINK); | 
|  | } | 
|  |  | 
|  | cnt = hdev->le_pkts ? hdev->le_cnt : hdev->acl_cnt; | 
|  | tmp = cnt; | 
|  | while (cnt && (chan = hci_chan_sent(hdev, LE_LINK, "e))) { | 
|  | u32 priority = (skb_peek(&chan->data_q))->priority; | 
|  | while (quote-- && (skb = skb_peek(&chan->data_q))) { | 
|  | BT_DBG("chan %p skb %p len %d priority %u", chan, skb, | 
|  | skb->len, skb->priority); | 
|  |  | 
|  | /* Stop if priority has changed */ | 
|  | if (skb->priority < priority) | 
|  | break; | 
|  |  | 
|  | skb = skb_dequeue(&chan->data_q); | 
|  |  | 
|  | hci_send_frame(hdev, skb); | 
|  | hdev->le_last_tx = jiffies; | 
|  |  | 
|  | cnt--; | 
|  | chan->sent++; | 
|  | chan->conn->sent++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (hdev->le_pkts) | 
|  | hdev->le_cnt = cnt; | 
|  | else | 
|  | hdev->acl_cnt = cnt; | 
|  |  | 
|  | if (cnt != tmp) | 
|  | hci_prio_recalculate(hdev, LE_LINK); | 
|  | } | 
|  |  | 
|  | static void hci_tx_work(struct work_struct *work) | 
|  | { | 
|  | struct hci_dev *hdev = container_of(work, struct hci_dev, tx_work); | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | BT_DBG("%s acl %d sco %d le %d", hdev->name, hdev->acl_cnt, | 
|  | hdev->sco_cnt, hdev->le_cnt); | 
|  |  | 
|  | if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | /* Schedule queues and send stuff to HCI driver */ | 
|  | hci_sched_acl(hdev); | 
|  | hci_sched_sco(hdev); | 
|  | hci_sched_esco(hdev); | 
|  | hci_sched_le(hdev); | 
|  | } | 
|  |  | 
|  | /* Send next queued raw (unknown type) packet */ | 
|  | while ((skb = skb_dequeue(&hdev->raw_q))) | 
|  | hci_send_frame(hdev, skb); | 
|  | } | 
|  |  | 
|  | /* ----- HCI RX task (incoming data processing) ----- */ | 
|  |  | 
|  | /* ACL data packet */ | 
|  | static void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_acl_hdr *hdr = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  | __u16 handle, flags; | 
|  |  | 
|  | skb_pull(skb, HCI_ACL_HDR_SIZE); | 
|  |  | 
|  | handle = __le16_to_cpu(hdr->handle); | 
|  | flags  = hci_flags(handle); | 
|  | handle = hci_handle(handle); | 
|  |  | 
|  | BT_DBG("%s len %d handle 0x%4.4x flags 0x%4.4x", hdev->name, skb->len, | 
|  | handle, flags); | 
|  |  | 
|  | hdev->stat.acl_rx++; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | conn = hci_conn_hash_lookup_handle(hdev, handle); | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | if (conn) { | 
|  | hci_conn_enter_active_mode(conn, BT_POWER_FORCE_ACTIVE_OFF); | 
|  |  | 
|  | /* Send to upper protocol */ | 
|  | l2cap_recv_acldata(conn, skb, flags); | 
|  | return; | 
|  | } else { | 
|  | BT_ERR("%s ACL packet for unknown connection handle %d", | 
|  | hdev->name, handle); | 
|  | } | 
|  |  | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | /* SCO data packet */ | 
|  | static void hci_scodata_packet(struct hci_dev *hdev, struct sk_buff *skb) | 
|  | { | 
|  | struct hci_sco_hdr *hdr = (void *) skb->data; | 
|  | struct hci_conn *conn; | 
|  | __u16 handle; | 
|  |  | 
|  | skb_pull(skb, HCI_SCO_HDR_SIZE); | 
|  |  | 
|  | handle = __le16_to_cpu(hdr->handle); | 
|  |  | 
|  | BT_DBG("%s len %d handle 0x%4.4x", hdev->name, skb->len, handle); | 
|  |  | 
|  | hdev->stat.sco_rx++; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | conn = hci_conn_hash_lookup_handle(hdev, handle); | 
|  | hci_dev_unlock(hdev); | 
|  |  | 
|  | if (conn) { | 
|  | /* Send to upper protocol */ | 
|  | sco_recv_scodata(conn, skb); | 
|  | return; | 
|  | } else { | 
|  | BT_ERR("%s SCO packet for unknown connection handle %d", | 
|  | hdev->name, handle); | 
|  | } | 
|  |  | 
|  | kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static bool hci_req_is_complete(struct hci_dev *hdev) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = skb_peek(&hdev->cmd_q); | 
|  | if (!skb) | 
|  | return true; | 
|  |  | 
|  | return (bt_cb(skb)->hci.req_flags & HCI_REQ_START); | 
|  | } | 
|  |  | 
|  | static void hci_resend_last(struct hci_dev *hdev) | 
|  | { | 
|  | struct hci_command_hdr *sent; | 
|  | struct sk_buff *skb; | 
|  | u16 opcode; | 
|  |  | 
|  | if (!hdev->sent_cmd) | 
|  | return; | 
|  |  | 
|  | sent = (void *) hdev->sent_cmd->data; | 
|  | opcode = __le16_to_cpu(sent->opcode); | 
|  | if (opcode == HCI_OP_RESET) | 
|  | return; | 
|  |  | 
|  | skb = skb_clone(hdev->sent_cmd, GFP_KERNEL); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | skb_queue_head(&hdev->cmd_q, skb); | 
|  | queue_work(hdev->workqueue, &hdev->cmd_work); | 
|  | } | 
|  |  | 
|  | void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status, | 
|  | hci_req_complete_t *req_complete, | 
|  | hci_req_complete_skb_t *req_complete_skb) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | unsigned long flags; | 
|  |  | 
|  | BT_DBG("opcode 0x%04x status 0x%02x", opcode, status); | 
|  |  | 
|  | /* If the completed command doesn't match the last one that was | 
|  | * sent we need to do special handling of it. | 
|  | */ | 
|  | if (!hci_sent_cmd_data(hdev, opcode)) { | 
|  | /* Some CSR based controllers generate a spontaneous | 
|  | * reset complete event during init and any pending | 
|  | * command will never be completed. In such a case we | 
|  | * need to resend whatever was the last sent | 
|  | * command. | 
|  | */ | 
|  | if (test_bit(HCI_INIT, &hdev->flags) && opcode == HCI_OP_RESET) | 
|  | hci_resend_last(hdev); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* If the command succeeded and there's still more commands in | 
|  | * this request the request is not yet complete. | 
|  | */ | 
|  | if (!status && !hci_req_is_complete(hdev)) | 
|  | return; | 
|  |  | 
|  | /* If this was the last command in a request the complete | 
|  | * callback would be found in hdev->sent_cmd instead of the | 
|  | * command queue (hdev->cmd_q). | 
|  | */ | 
|  | if (bt_cb(hdev->sent_cmd)->hci.req_flags & HCI_REQ_SKB) { | 
|  | *req_complete_skb = bt_cb(hdev->sent_cmd)->hci.req_complete_skb; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (bt_cb(hdev->sent_cmd)->hci.req_complete) { | 
|  | *req_complete = bt_cb(hdev->sent_cmd)->hci.req_complete; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Remove all pending commands belonging to this request */ | 
|  | spin_lock_irqsave(&hdev->cmd_q.lock, flags); | 
|  | while ((skb = __skb_dequeue(&hdev->cmd_q))) { | 
|  | if (bt_cb(skb)->hci.req_flags & HCI_REQ_START) { | 
|  | __skb_queue_head(&hdev->cmd_q, skb); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (bt_cb(skb)->hci.req_flags & HCI_REQ_SKB) | 
|  | *req_complete_skb = bt_cb(skb)->hci.req_complete_skb; | 
|  | else | 
|  | *req_complete = bt_cb(skb)->hci.req_complete; | 
|  | kfree_skb(skb); | 
|  | } | 
|  | spin_unlock_irqrestore(&hdev->cmd_q.lock, flags); | 
|  | } | 
|  |  | 
|  | static void hci_rx_work(struct work_struct *work) | 
|  | { | 
|  | struct hci_dev *hdev = container_of(work, struct hci_dev, rx_work); | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | BT_DBG("%s", hdev->name); | 
|  |  | 
|  | while ((skb = skb_dequeue(&hdev->rx_q))) { | 
|  | /* Send copy to monitor */ | 
|  | hci_send_to_monitor(hdev, skb); | 
|  |  | 
|  | if (atomic_read(&hdev->promisc)) { | 
|  | /* Send copy to the sockets */ | 
|  | hci_send_to_sock(hdev, skb); | 
|  | } | 
|  |  | 
|  | if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | 
|  | kfree_skb(skb); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (test_bit(HCI_INIT, &hdev->flags)) { | 
|  | /* Don't process data packets in this states. */ | 
|  | switch (hci_skb_pkt_type(skb)) { | 
|  | case HCI_ACLDATA_PKT: | 
|  | case HCI_SCODATA_PKT: | 
|  | kfree_skb(skb); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Process frame */ | 
|  | switch (hci_skb_pkt_type(skb)) { | 
|  | case HCI_EVENT_PKT: | 
|  | BT_DBG("%s Event packet", hdev->name); | 
|  | hci_event_packet(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_ACLDATA_PKT: | 
|  | BT_DBG("%s ACL data packet", hdev->name); | 
|  | hci_acldata_packet(hdev, skb); | 
|  | break; | 
|  |  | 
|  | case HCI_SCODATA_PKT: | 
|  | BT_DBG("%s SCO data packet", hdev->name); | 
|  | hci_scodata_packet(hdev, skb); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | kfree_skb(skb); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void hci_cmd_work(struct work_struct *work) | 
|  | { | 
|  | struct hci_dev *hdev = container_of(work, struct hci_dev, cmd_work); | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | BT_DBG("%s cmd_cnt %d cmd queued %d", hdev->name, | 
|  | atomic_read(&hdev->cmd_cnt), skb_queue_len(&hdev->cmd_q)); | 
|  |  | 
|  | /* Send queued commands */ | 
|  | if (atomic_read(&hdev->cmd_cnt)) { | 
|  | skb = skb_dequeue(&hdev->cmd_q); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | kfree_skb(hdev->sent_cmd); | 
|  |  | 
|  | hdev->sent_cmd = skb_clone(skb, GFP_KERNEL); | 
|  | if (hdev->sent_cmd) { | 
|  | atomic_dec(&hdev->cmd_cnt); | 
|  | hci_send_frame(hdev, skb); | 
|  | if (test_bit(HCI_RESET, &hdev->flags)) | 
|  | cancel_delayed_work(&hdev->cmd_timer); | 
|  | else | 
|  | schedule_delayed_work(&hdev->cmd_timer, | 
|  | HCI_CMD_TIMEOUT); | 
|  | } else { | 
|  | skb_queue_head(&hdev->cmd_q, skb); | 
|  | queue_work(hdev->workqueue, &hdev->cmd_work); | 
|  | } | 
|  | } | 
|  | } |