| /* |
| * Analog Devices ADV7511 HDMI transmitter driver |
| * |
| * Copyright 2012 Analog Devices Inc. |
| * Copyright (c) 2016, Linaro Limited |
| * |
| * Licensed under the GPL-2. |
| */ |
| |
| #include <sound/core.h> |
| #include <sound/hdmi-codec.h> |
| #include <sound/pcm.h> |
| #include <sound/soc.h> |
| #include <linux/of_graph.h> |
| |
| #include "adv7511.h" |
| |
| static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs, |
| unsigned int *cts, unsigned int *n) |
| { |
| switch (fs) { |
| case 32000: |
| *n = 4096; |
| break; |
| case 44100: |
| *n = 6272; |
| break; |
| case 48000: |
| *n = 6144; |
| break; |
| } |
| |
| *cts = ((f_tmds * *n) / (128 * fs)) * 1000; |
| } |
| |
| static int adv7511_update_cts_n(struct adv7511 *adv7511) |
| { |
| unsigned int cts = 0; |
| unsigned int n = 0; |
| |
| adv7511_calc_cts_n(adv7511->f_tmds, adv7511->f_audio, &cts, &n); |
| |
| regmap_write(adv7511->regmap, ADV7511_REG_N0, (n >> 16) & 0xf); |
| regmap_write(adv7511->regmap, ADV7511_REG_N1, (n >> 8) & 0xff); |
| regmap_write(adv7511->regmap, ADV7511_REG_N2, n & 0xff); |
| |
| regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL0, |
| (cts >> 16) & 0xf); |
| regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL1, |
| (cts >> 8) & 0xff); |
| regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL2, |
| cts & 0xff); |
| |
| return 0; |
| } |
| |
| int adv7511_hdmi_hw_params(struct device *dev, void *data, |
| struct hdmi_codec_daifmt *fmt, |
| struct hdmi_codec_params *hparms) |
| { |
| struct adv7511 *adv7511 = dev_get_drvdata(dev); |
| unsigned int audio_source, i2s_format = 0; |
| unsigned int invert_clock; |
| unsigned int rate; |
| unsigned int len; |
| |
| switch (hparms->sample_rate) { |
| case 32000: |
| rate = ADV7511_SAMPLE_FREQ_32000; |
| break; |
| case 44100: |
| rate = ADV7511_SAMPLE_FREQ_44100; |
| break; |
| case 48000: |
| rate = ADV7511_SAMPLE_FREQ_48000; |
| break; |
| case 88200: |
| rate = ADV7511_SAMPLE_FREQ_88200; |
| break; |
| case 96000: |
| rate = ADV7511_SAMPLE_FREQ_96000; |
| break; |
| case 176400: |
| rate = ADV7511_SAMPLE_FREQ_176400; |
| break; |
| case 192000: |
| rate = ADV7511_SAMPLE_FREQ_192000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (hparms->sample_width) { |
| case 16: |
| len = ADV7511_I2S_SAMPLE_LEN_16; |
| break; |
| case 18: |
| len = ADV7511_I2S_SAMPLE_LEN_18; |
| break; |
| case 20: |
| len = ADV7511_I2S_SAMPLE_LEN_20; |
| break; |
| case 24: |
| len = ADV7511_I2S_SAMPLE_LEN_24; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt->fmt) { |
| case HDMI_I2S: |
| audio_source = ADV7511_AUDIO_SOURCE_I2S; |
| i2s_format = ADV7511_I2S_FORMAT_I2S; |
| break; |
| case HDMI_RIGHT_J: |
| audio_source = ADV7511_AUDIO_SOURCE_I2S; |
| i2s_format = ADV7511_I2S_FORMAT_RIGHT_J; |
| break; |
| case HDMI_LEFT_J: |
| audio_source = ADV7511_AUDIO_SOURCE_I2S; |
| i2s_format = ADV7511_I2S_FORMAT_LEFT_J; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| invert_clock = fmt->bit_clk_inv; |
| |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_SOURCE, 0x70, |
| audio_source << 4); |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, BIT(6), |
| invert_clock << 6); |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_I2S_CONFIG, 0x03, |
| i2s_format); |
| |
| adv7511->audio_source = audio_source; |
| |
| adv7511->f_audio = hparms->sample_rate; |
| |
| adv7511_update_cts_n(adv7511); |
| |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG3, |
| ADV7511_AUDIO_CFG3_LEN_MASK, len); |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, |
| ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4); |
| regmap_write(adv7511->regmap, 0x73, 0x1); |
| |
| return 0; |
| } |
| |
| static int audio_startup(struct device *dev, void *data) |
| { |
| struct adv7511 *adv7511 = dev_get_drvdata(dev); |
| |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, |
| BIT(7), 0); |
| |
| /* hide Audio infoframe updates */ |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, |
| BIT(5), BIT(5)); |
| /* enable N/CTS, enable Audio sample packets */ |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1, |
| BIT(5), BIT(5)); |
| /* enable N/CTS */ |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1, |
| BIT(6), BIT(6)); |
| /* not copyrighted */ |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG1, |
| BIT(5), BIT(5)); |
| /* enable audio infoframes */ |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1, |
| BIT(3), BIT(3)); |
| /* AV mute disable */ |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0), |
| BIT(7) | BIT(6), BIT(7)); |
| /* use Audio infoframe updated info */ |
| regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1), |
| BIT(5), 0); |
| return 0; |
| } |
| |
| static void audio_shutdown(struct device *dev, void *data) |
| { |
| } |
| |
| static int adv7511_hdmi_i2s_get_dai_id(struct snd_soc_component *component, |
| struct device_node *endpoint) |
| { |
| struct of_endpoint of_ep; |
| int ret; |
| |
| ret = of_graph_parse_endpoint(endpoint, &of_ep); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * HDMI sound should be located as reg = <2> |
| * Then, it is sound port 0 |
| */ |
| if (of_ep.port == 2) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static const struct hdmi_codec_ops adv7511_codec_ops = { |
| .hw_params = adv7511_hdmi_hw_params, |
| .audio_shutdown = audio_shutdown, |
| .audio_startup = audio_startup, |
| .get_dai_id = adv7511_hdmi_i2s_get_dai_id, |
| }; |
| |
| static const struct hdmi_codec_pdata codec_data = { |
| .ops = &adv7511_codec_ops, |
| .max_i2s_channels = 2, |
| .i2s = 1, |
| }; |
| |
| int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511) |
| { |
| adv7511->audio_pdev = platform_device_register_data(dev, |
| HDMI_CODEC_DRV_NAME, |
| PLATFORM_DEVID_AUTO, |
| &codec_data, |
| sizeof(codec_data)); |
| return PTR_ERR_OR_ZERO(adv7511->audio_pdev); |
| } |
| |
| void adv7511_audio_exit(struct adv7511 *adv7511) |
| { |
| if (adv7511->audio_pdev) { |
| platform_device_unregister(adv7511->audio_pdev); |
| adv7511->audio_pdev = NULL; |
| } |
| } |