| /* |
| * dcdbas.c: Dell Systems Management Base Driver |
| * |
| * The Dell Systems Management Base Driver provides a sysfs interface for |
| * systems management software to perform System Management Interrupts (SMIs) |
| * and Host Control Actions (power cycle or power off after OS shutdown) on |
| * Dell systems. |
| * |
| * See Documentation/dcdbas.txt for more information. |
| * |
| * Copyright (C) 1995-2006 Dell Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License v2.0 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/acpi.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/errno.h> |
| #include <linux/cpu.h> |
| #include <linux/gfp.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/mc146818rtc.h> |
| #include <linux/module.h> |
| #include <linux/reboot.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/mutex.h> |
| |
| #include "dcdbas.h" |
| |
| #define DRIVER_NAME "dcdbas" |
| #define DRIVER_VERSION "5.6.0-3.3" |
| #define DRIVER_DESCRIPTION "Dell Systems Management Base Driver" |
| |
| static struct platform_device *dcdbas_pdev; |
| |
| static u8 *smi_data_buf; |
| static dma_addr_t smi_data_buf_handle; |
| static unsigned long smi_data_buf_size; |
| static unsigned long max_smi_data_buf_size = MAX_SMI_DATA_BUF_SIZE; |
| static u32 smi_data_buf_phys_addr; |
| static DEFINE_MUTEX(smi_data_lock); |
| static u8 *eps_buffer; |
| |
| static unsigned int host_control_action; |
| static unsigned int host_control_smi_type; |
| static unsigned int host_control_on_shutdown; |
| |
| static bool wsmt_enabled; |
| |
| /** |
| * smi_data_buf_free: free SMI data buffer |
| */ |
| static void smi_data_buf_free(void) |
| { |
| if (!smi_data_buf || wsmt_enabled) |
| return; |
| |
| dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n", |
| __func__, smi_data_buf_phys_addr, smi_data_buf_size); |
| |
| dma_free_coherent(&dcdbas_pdev->dev, smi_data_buf_size, smi_data_buf, |
| smi_data_buf_handle); |
| smi_data_buf = NULL; |
| smi_data_buf_handle = 0; |
| smi_data_buf_phys_addr = 0; |
| smi_data_buf_size = 0; |
| } |
| |
| /** |
| * smi_data_buf_realloc: grow SMI data buffer if needed |
| */ |
| static int smi_data_buf_realloc(unsigned long size) |
| { |
| void *buf; |
| dma_addr_t handle; |
| |
| if (smi_data_buf_size >= size) |
| return 0; |
| |
| if (size > max_smi_data_buf_size) |
| return -EINVAL; |
| |
| /* new buffer is needed */ |
| buf = dma_alloc_coherent(&dcdbas_pdev->dev, size, &handle, GFP_KERNEL); |
| if (!buf) { |
| dev_dbg(&dcdbas_pdev->dev, |
| "%s: failed to allocate memory size %lu\n", |
| __func__, size); |
| return -ENOMEM; |
| } |
| /* memory zeroed by dma_alloc_coherent */ |
| |
| if (smi_data_buf) |
| memcpy(buf, smi_data_buf, smi_data_buf_size); |
| |
| /* free any existing buffer */ |
| smi_data_buf_free(); |
| |
| /* set up new buffer for use */ |
| smi_data_buf = buf; |
| smi_data_buf_handle = handle; |
| smi_data_buf_phys_addr = (u32) virt_to_phys(buf); |
| smi_data_buf_size = size; |
| |
| dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n", |
| __func__, smi_data_buf_phys_addr, smi_data_buf_size); |
| |
| return 0; |
| } |
| |
| static ssize_t smi_data_buf_phys_addr_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%x\n", smi_data_buf_phys_addr); |
| } |
| |
| static ssize_t smi_data_buf_size_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%lu\n", smi_data_buf_size); |
| } |
| |
| static ssize_t smi_data_buf_size_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| unsigned long buf_size; |
| ssize_t ret; |
| |
| buf_size = simple_strtoul(buf, NULL, 10); |
| |
| /* make sure SMI data buffer is at least buf_size */ |
| mutex_lock(&smi_data_lock); |
| ret = smi_data_buf_realloc(buf_size); |
| mutex_unlock(&smi_data_lock); |
| if (ret) |
| return ret; |
| |
| return count; |
| } |
| |
| static ssize_t smi_data_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t pos, size_t count) |
| { |
| ssize_t ret; |
| |
| mutex_lock(&smi_data_lock); |
| ret = memory_read_from_buffer(buf, count, &pos, smi_data_buf, |
| smi_data_buf_size); |
| mutex_unlock(&smi_data_lock); |
| return ret; |
| } |
| |
| static ssize_t smi_data_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t pos, size_t count) |
| { |
| ssize_t ret; |
| |
| if ((pos + count) > max_smi_data_buf_size) |
| return -EINVAL; |
| |
| mutex_lock(&smi_data_lock); |
| |
| ret = smi_data_buf_realloc(pos + count); |
| if (ret) |
| goto out; |
| |
| memcpy(smi_data_buf + pos, buf, count); |
| ret = count; |
| out: |
| mutex_unlock(&smi_data_lock); |
| return ret; |
| } |
| |
| static ssize_t host_control_action_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%u\n", host_control_action); |
| } |
| |
| static ssize_t host_control_action_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| ssize_t ret; |
| |
| /* make sure buffer is available for host control command */ |
| mutex_lock(&smi_data_lock); |
| ret = smi_data_buf_realloc(sizeof(struct apm_cmd)); |
| mutex_unlock(&smi_data_lock); |
| if (ret) |
| return ret; |
| |
| host_control_action = simple_strtoul(buf, NULL, 10); |
| return count; |
| } |
| |
| static ssize_t host_control_smi_type_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%u\n", host_control_smi_type); |
| } |
| |
| static ssize_t host_control_smi_type_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| host_control_smi_type = simple_strtoul(buf, NULL, 10); |
| return count; |
| } |
| |
| static ssize_t host_control_on_shutdown_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%u\n", host_control_on_shutdown); |
| } |
| |
| static ssize_t host_control_on_shutdown_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| host_control_on_shutdown = simple_strtoul(buf, NULL, 10); |
| return count; |
| } |
| |
| static int raise_smi(void *par) |
| { |
| struct smi_cmd *smi_cmd = par; |
| |
| if (smp_processor_id() != 0) { |
| dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n", |
| __func__); |
| return -EBUSY; |
| } |
| |
| /* generate SMI */ |
| /* inb to force posted write through and make SMI happen now */ |
| asm volatile ( |
| "outb %b0,%w1\n" |
| "inb %w1" |
| : /* no output args */ |
| : "a" (smi_cmd->command_code), |
| "d" (smi_cmd->command_address), |
| "b" (smi_cmd->ebx), |
| "c" (smi_cmd->ecx) |
| : "memory" |
| ); |
| |
| return 0; |
| } |
| /** |
| * dcdbas_smi_request: generate SMI request |
| * |
| * Called with smi_data_lock. |
| */ |
| int dcdbas_smi_request(struct smi_cmd *smi_cmd) |
| { |
| int ret; |
| |
| if (smi_cmd->magic != SMI_CMD_MAGIC) { |
| dev_info(&dcdbas_pdev->dev, "%s: invalid magic value\n", |
| __func__); |
| return -EBADR; |
| } |
| |
| /* SMI requires CPU 0 */ |
| get_online_cpus(); |
| ret = smp_call_on_cpu(0, raise_smi, smi_cmd, true); |
| put_online_cpus(); |
| |
| return ret; |
| } |
| |
| /** |
| * smi_request_store: |
| * |
| * The valid values are: |
| * 0: zero SMI data buffer |
| * 1: generate calling interface SMI |
| * 2: generate raw SMI |
| * |
| * User application writes smi_cmd to smi_data before telling driver |
| * to generate SMI. |
| */ |
| static ssize_t smi_request_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct smi_cmd *smi_cmd; |
| unsigned long val = simple_strtoul(buf, NULL, 10); |
| ssize_t ret; |
| |
| mutex_lock(&smi_data_lock); |
| |
| if (smi_data_buf_size < sizeof(struct smi_cmd)) { |
| ret = -ENODEV; |
| goto out; |
| } |
| smi_cmd = (struct smi_cmd *)smi_data_buf; |
| |
| switch (val) { |
| case 2: |
| /* Raw SMI */ |
| ret = dcdbas_smi_request(smi_cmd); |
| if (!ret) |
| ret = count; |
| break; |
| case 1: |
| /* |
| * Calling Interface SMI |
| * |
| * Provide physical address of command buffer field within |
| * the struct smi_cmd to BIOS. |
| * |
| * Because the address that smi_cmd (smi_data_buf) points to |
| * will be from memremap() of a non-memory address if WSMT |
| * is present, we can't use virt_to_phys() on smi_cmd, so |
| * we have to use the physical address that was saved when |
| * the virtual address for smi_cmd was received. |
| */ |
| smi_cmd->ebx = smi_data_buf_phys_addr + |
| offsetof(struct smi_cmd, command_buffer); |
| ret = dcdbas_smi_request(smi_cmd); |
| if (!ret) |
| ret = count; |
| break; |
| case 0: |
| memset(smi_data_buf, 0, smi_data_buf_size); |
| ret = count; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| out: |
| mutex_unlock(&smi_data_lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(dcdbas_smi_request); |
| |
| /** |
| * host_control_smi: generate host control SMI |
| * |
| * Caller must set up the host control command in smi_data_buf. |
| */ |
| static int host_control_smi(void) |
| { |
| struct apm_cmd *apm_cmd; |
| u8 *data; |
| unsigned long flags; |
| u32 num_ticks; |
| s8 cmd_status; |
| u8 index; |
| |
| apm_cmd = (struct apm_cmd *)smi_data_buf; |
| apm_cmd->status = ESM_STATUS_CMD_UNSUCCESSFUL; |
| |
| switch (host_control_smi_type) { |
| case HC_SMITYPE_TYPE1: |
| spin_lock_irqsave(&rtc_lock, flags); |
| /* write SMI data buffer physical address */ |
| data = (u8 *)&smi_data_buf_phys_addr; |
| for (index = PE1300_CMOS_CMD_STRUCT_PTR; |
| index < (PE1300_CMOS_CMD_STRUCT_PTR + 4); |
| index++, data++) { |
| outb(index, |
| (CMOS_BASE_PORT + CMOS_PAGE2_INDEX_PORT_PIIX4)); |
| outb(*data, |
| (CMOS_BASE_PORT + CMOS_PAGE2_DATA_PORT_PIIX4)); |
| } |
| |
| /* first set status to -1 as called by spec */ |
| cmd_status = ESM_STATUS_CMD_UNSUCCESSFUL; |
| outb((u8) cmd_status, PCAT_APM_STATUS_PORT); |
| |
| /* generate SMM call */ |
| outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT); |
| spin_unlock_irqrestore(&rtc_lock, flags); |
| |
| /* wait a few to see if it executed */ |
| num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING; |
| while ((cmd_status = inb(PCAT_APM_STATUS_PORT)) |
| == ESM_STATUS_CMD_UNSUCCESSFUL) { |
| num_ticks--; |
| if (num_ticks == EXPIRED_TIMER) |
| return -ETIME; |
| } |
| break; |
| |
| case HC_SMITYPE_TYPE2: |
| case HC_SMITYPE_TYPE3: |
| spin_lock_irqsave(&rtc_lock, flags); |
| /* write SMI data buffer physical address */ |
| data = (u8 *)&smi_data_buf_phys_addr; |
| for (index = PE1400_CMOS_CMD_STRUCT_PTR; |
| index < (PE1400_CMOS_CMD_STRUCT_PTR + 4); |
| index++, data++) { |
| outb(index, (CMOS_BASE_PORT + CMOS_PAGE1_INDEX_PORT)); |
| outb(*data, (CMOS_BASE_PORT + CMOS_PAGE1_DATA_PORT)); |
| } |
| |
| /* generate SMM call */ |
| if (host_control_smi_type == HC_SMITYPE_TYPE3) |
| outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT); |
| else |
| outb(ESM_APM_CMD, PE1400_APM_CONTROL_PORT); |
| |
| /* restore RTC index pointer since it was written to above */ |
| CMOS_READ(RTC_REG_C); |
| spin_unlock_irqrestore(&rtc_lock, flags); |
| |
| /* read control port back to serialize write */ |
| cmd_status = inb(PE1400_APM_CONTROL_PORT); |
| |
| /* wait a few to see if it executed */ |
| num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING; |
| while (apm_cmd->status == ESM_STATUS_CMD_UNSUCCESSFUL) { |
| num_ticks--; |
| if (num_ticks == EXPIRED_TIMER) |
| return -ETIME; |
| } |
| break; |
| |
| default: |
| dev_dbg(&dcdbas_pdev->dev, "%s: invalid SMI type %u\n", |
| __func__, host_control_smi_type); |
| return -ENOSYS; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * dcdbas_host_control: initiate host control |
| * |
| * This function is called by the driver after the system has |
| * finished shutting down if the user application specified a |
| * host control action to perform on shutdown. It is safe to |
| * use smi_data_buf at this point because the system has finished |
| * shutting down and no userspace apps are running. |
| */ |
| static void dcdbas_host_control(void) |
| { |
| struct apm_cmd *apm_cmd; |
| u8 action; |
| |
| if (host_control_action == HC_ACTION_NONE) |
| return; |
| |
| action = host_control_action; |
| host_control_action = HC_ACTION_NONE; |
| |
| if (!smi_data_buf) { |
| dev_dbg(&dcdbas_pdev->dev, "%s: no SMI buffer\n", __func__); |
| return; |
| } |
| |
| if (smi_data_buf_size < sizeof(struct apm_cmd)) { |
| dev_dbg(&dcdbas_pdev->dev, "%s: SMI buffer too small\n", |
| __func__); |
| return; |
| } |
| |
| apm_cmd = (struct apm_cmd *)smi_data_buf; |
| |
| /* power off takes precedence */ |
| if (action & HC_ACTION_HOST_CONTROL_POWEROFF) { |
| apm_cmd->command = ESM_APM_POWER_CYCLE; |
| apm_cmd->reserved = 0; |
| *((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 0; |
| host_control_smi(); |
| } else if (action & HC_ACTION_HOST_CONTROL_POWERCYCLE) { |
| apm_cmd->command = ESM_APM_POWER_CYCLE; |
| apm_cmd->reserved = 0; |
| *((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 20; |
| host_control_smi(); |
| } |
| } |
| |
| /* WSMT */ |
| |
| static u8 checksum(u8 *buffer, u8 length) |
| { |
| u8 sum = 0; |
| u8 *end = buffer + length; |
| |
| while (buffer < end) |
| sum += *buffer++; |
| return sum; |
| } |
| |
| static inline struct smm_eps_table *check_eps_table(u8 *addr) |
| { |
| struct smm_eps_table *eps = (struct smm_eps_table *)addr; |
| |
| if (strncmp(eps->smm_comm_buff_anchor, SMM_EPS_SIG, 4) != 0) |
| return NULL; |
| |
| if (checksum(addr, eps->length) != 0) |
| return NULL; |
| |
| return eps; |
| } |
| |
| static int dcdbas_check_wsmt(void) |
| { |
| struct acpi_table_wsmt *wsmt = NULL; |
| struct smm_eps_table *eps = NULL; |
| u64 remap_size; |
| u8 *addr; |
| |
| acpi_get_table(ACPI_SIG_WSMT, 0, (struct acpi_table_header **)&wsmt); |
| if (!wsmt) |
| return 0; |
| |
| /* Check if WSMT ACPI table shows that protection is enabled */ |
| if (!(wsmt->protection_flags & ACPI_WSMT_FIXED_COMM_BUFFERS) || |
| !(wsmt->protection_flags & ACPI_WSMT_COMM_BUFFER_NESTED_PTR_PROTECTION)) |
| return 0; |
| |
| /* Scan for EPS (entry point structure) */ |
| for (addr = (u8 *)__va(0xf0000); |
| addr < (u8 *)__va(0x100000 - sizeof(struct smm_eps_table)); |
| addr += 16) { |
| eps = check_eps_table(addr); |
| if (eps) |
| break; |
| } |
| |
| if (!eps) { |
| dev_dbg(&dcdbas_pdev->dev, "found WSMT, but no EPS found\n"); |
| return -ENODEV; |
| } |
| |
| /* |
| * Get physical address of buffer and map to virtual address. |
| * Table gives size in 4K pages, regardless of actual system page size. |
| */ |
| if (upper_32_bits(eps->smm_comm_buff_addr + 8)) { |
| dev_warn(&dcdbas_pdev->dev, "found WSMT, but EPS buffer address is above 4GB\n"); |
| return -EINVAL; |
| } |
| /* |
| * Limit remap size to MAX_SMI_DATA_BUF_SIZE + 8 (since the first 8 |
| * bytes are used for a semaphore, not the data buffer itself). |
| */ |
| remap_size = eps->num_of_4k_pages * PAGE_SIZE; |
| if (remap_size > MAX_SMI_DATA_BUF_SIZE + 8) |
| remap_size = MAX_SMI_DATA_BUF_SIZE + 8; |
| eps_buffer = memremap(eps->smm_comm_buff_addr, remap_size, MEMREMAP_WB); |
| if (!eps_buffer) { |
| dev_warn(&dcdbas_pdev->dev, "found WSMT, but failed to map EPS buffer\n"); |
| return -ENOMEM; |
| } |
| |
| /* First 8 bytes is for a semaphore, not part of the smi_data_buf */ |
| smi_data_buf_phys_addr = eps->smm_comm_buff_addr + 8; |
| smi_data_buf = eps_buffer + 8; |
| smi_data_buf_size = remap_size - 8; |
| max_smi_data_buf_size = smi_data_buf_size; |
| wsmt_enabled = true; |
| dev_info(&dcdbas_pdev->dev, |
| "WSMT found, using firmware-provided SMI buffer.\n"); |
| return 1; |
| } |
| |
| /** |
| * dcdbas_reboot_notify: handle reboot notification for host control |
| */ |
| static int dcdbas_reboot_notify(struct notifier_block *nb, unsigned long code, |
| void *unused) |
| { |
| switch (code) { |
| case SYS_DOWN: |
| case SYS_HALT: |
| case SYS_POWER_OFF: |
| if (host_control_on_shutdown) { |
| /* firmware is going to perform host control action */ |
| printk(KERN_WARNING "Please wait for shutdown " |
| "action to complete...\n"); |
| dcdbas_host_control(); |
| } |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block dcdbas_reboot_nb = { |
| .notifier_call = dcdbas_reboot_notify, |
| .next = NULL, |
| .priority = INT_MIN |
| }; |
| |
| static DCDBAS_BIN_ATTR_RW(smi_data); |
| |
| static struct bin_attribute *dcdbas_bin_attrs[] = { |
| &bin_attr_smi_data, |
| NULL |
| }; |
| |
| static DCDBAS_DEV_ATTR_RW(smi_data_buf_size); |
| static DCDBAS_DEV_ATTR_RO(smi_data_buf_phys_addr); |
| static DCDBAS_DEV_ATTR_WO(smi_request); |
| static DCDBAS_DEV_ATTR_RW(host_control_action); |
| static DCDBAS_DEV_ATTR_RW(host_control_smi_type); |
| static DCDBAS_DEV_ATTR_RW(host_control_on_shutdown); |
| |
| static struct attribute *dcdbas_dev_attrs[] = { |
| &dev_attr_smi_data_buf_size.attr, |
| &dev_attr_smi_data_buf_phys_addr.attr, |
| &dev_attr_smi_request.attr, |
| &dev_attr_host_control_action.attr, |
| &dev_attr_host_control_smi_type.attr, |
| &dev_attr_host_control_on_shutdown.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group dcdbas_attr_group = { |
| .attrs = dcdbas_dev_attrs, |
| .bin_attrs = dcdbas_bin_attrs, |
| }; |
| |
| static int dcdbas_probe(struct platform_device *dev) |
| { |
| int error; |
| |
| host_control_action = HC_ACTION_NONE; |
| host_control_smi_type = HC_SMITYPE_NONE; |
| |
| dcdbas_pdev = dev; |
| |
| /* Check if ACPI WSMT table specifies protected SMI buffer address */ |
| error = dcdbas_check_wsmt(); |
| if (error < 0) |
| return error; |
| |
| /* |
| * BIOS SMI calls require buffer addresses be in 32-bit address space. |
| * This is done by setting the DMA mask below. |
| */ |
| error = dma_set_coherent_mask(&dcdbas_pdev->dev, DMA_BIT_MASK(32)); |
| if (error) |
| return error; |
| |
| error = sysfs_create_group(&dev->dev.kobj, &dcdbas_attr_group); |
| if (error) |
| return error; |
| |
| register_reboot_notifier(&dcdbas_reboot_nb); |
| |
| dev_info(&dev->dev, "%s (version %s)\n", |
| DRIVER_DESCRIPTION, DRIVER_VERSION); |
| |
| return 0; |
| } |
| |
| static int dcdbas_remove(struct platform_device *dev) |
| { |
| unregister_reboot_notifier(&dcdbas_reboot_nb); |
| sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group); |
| |
| return 0; |
| } |
| |
| static struct platform_driver dcdbas_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| }, |
| .probe = dcdbas_probe, |
| .remove = dcdbas_remove, |
| }; |
| |
| static const struct platform_device_info dcdbas_dev_info __initconst = { |
| .name = DRIVER_NAME, |
| .id = -1, |
| .dma_mask = DMA_BIT_MASK(32), |
| }; |
| |
| static struct platform_device *dcdbas_pdev_reg; |
| |
| /** |
| * dcdbas_init: initialize driver |
| */ |
| static int __init dcdbas_init(void) |
| { |
| int error; |
| |
| error = platform_driver_register(&dcdbas_driver); |
| if (error) |
| return error; |
| |
| dcdbas_pdev_reg = platform_device_register_full(&dcdbas_dev_info); |
| if (IS_ERR(dcdbas_pdev_reg)) { |
| error = PTR_ERR(dcdbas_pdev_reg); |
| goto err_unregister_driver; |
| } |
| |
| return 0; |
| |
| err_unregister_driver: |
| platform_driver_unregister(&dcdbas_driver); |
| return error; |
| } |
| |
| /** |
| * dcdbas_exit: perform driver cleanup |
| */ |
| static void __exit dcdbas_exit(void) |
| { |
| /* |
| * make sure functions that use dcdbas_pdev are called |
| * before platform_device_unregister |
| */ |
| unregister_reboot_notifier(&dcdbas_reboot_nb); |
| |
| /* |
| * We have to free the buffer here instead of dcdbas_remove |
| * because only in module exit function we can be sure that |
| * all sysfs attributes belonging to this module have been |
| * released. |
| */ |
| if (dcdbas_pdev) |
| smi_data_buf_free(); |
| if (eps_buffer) |
| memunmap(eps_buffer); |
| platform_device_unregister(dcdbas_pdev_reg); |
| platform_driver_unregister(&dcdbas_driver); |
| } |
| |
| subsys_initcall_sync(dcdbas_init); |
| module_exit(dcdbas_exit); |
| |
| MODULE_DESCRIPTION(DRIVER_DESCRIPTION " (version " DRIVER_VERSION ")"); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_AUTHOR("Dell Inc."); |
| MODULE_LICENSE("GPL"); |
| /* Any System or BIOS claiming to be by Dell */ |
| MODULE_ALIAS("dmi:*:[bs]vnD[Ee][Ll][Ll]*:*"); |