| /* drivers/gpu/drm/exynos5433_drm_decon.c |
| * |
| * Copyright (C) 2015 Samsung Electronics Co.Ltd |
| * Authors: |
| * Joonyoung Shim <jy0922.shim@samsung.com> |
| * Hyungwon Hwang <human.hwang@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundationr |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/component.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <video/exynos5433_decon.h> |
| |
| #include "exynos_drm_drv.h" |
| #include "exynos_drm_crtc.h" |
| #include "exynos_drm_fb.h" |
| #include "exynos_drm_plane.h" |
| #include "exynos_drm_iommu.h" |
| |
| #define WINDOWS_NR 3 |
| #define CURSOR_WIN 2 |
| #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 |
| |
| static const char * const decon_clks_name[] = { |
| "pclk", |
| "aclk_decon", |
| "aclk_smmu_decon0x", |
| "aclk_xiu_decon0x", |
| "pclk_smmu_decon0x", |
| "sclk_decon_vclk", |
| "sclk_decon_eclk", |
| }; |
| |
| enum decon_iftype { |
| IFTYPE_RGB, |
| IFTYPE_I80, |
| IFTYPE_HDMI |
| }; |
| |
| enum decon_flag_bits { |
| BIT_CLKS_ENABLED, |
| BIT_IRQS_ENABLED, |
| BIT_WIN_UPDATED, |
| BIT_SUSPENDED |
| }; |
| |
| struct decon_context { |
| struct device *dev; |
| struct drm_device *drm_dev; |
| struct exynos_drm_crtc *crtc; |
| struct exynos_drm_plane planes[WINDOWS_NR]; |
| void __iomem *addr; |
| struct clk *clks[ARRAY_SIZE(decon_clks_name)]; |
| int pipe; |
| unsigned long flags; |
| enum decon_iftype out_type; |
| int first_win; |
| }; |
| |
| static const uint32_t decon_formats[] = { |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_ARGB8888, |
| }; |
| |
| static inline void decon_set_bits(struct decon_context *ctx, u32 reg, u32 mask, |
| u32 val) |
| { |
| val = (val & mask) | (readl(ctx->addr + reg) & ~mask); |
| writel(val, ctx->addr + reg); |
| } |
| |
| static int decon_enable_vblank(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| u32 val; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return -EPERM; |
| |
| if (test_and_set_bit(BIT_IRQS_ENABLED, &ctx->flags)) { |
| val = VIDINTCON0_INTEN; |
| if (ctx->out_type == IFTYPE_I80) |
| val |= VIDINTCON0_FRAMEDONE; |
| else |
| val |= VIDINTCON0_INTFRMEN; |
| |
| writel(val, ctx->addr + DECON_VIDINTCON0); |
| } |
| |
| return 0; |
| } |
| |
| static void decon_disable_vblank(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| if (test_and_clear_bit(BIT_IRQS_ENABLED, &ctx->flags)) |
| writel(0, ctx->addr + DECON_VIDINTCON0); |
| } |
| |
| static void decon_setup_trigger(struct decon_context *ctx) |
| { |
| u32 val = (ctx->out_type != IFTYPE_HDMI) |
| ? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | |
| TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN |
| : TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | |
| TRIGCON_HWTRIGMASK_I80_RGB | TRIGCON_HWTRIGEN_I80_RGB; |
| writel(val, ctx->addr + DECON_TRIGCON); |
| } |
| |
| static void decon_commit(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| struct drm_display_mode *m = &crtc->base.mode; |
| u32 val; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| if (ctx->out_type == IFTYPE_HDMI) { |
| m->crtc_hsync_start = m->crtc_hdisplay + 10; |
| m->crtc_hsync_end = m->crtc_htotal - 92; |
| m->crtc_vsync_start = m->crtc_vdisplay + 1; |
| m->crtc_vsync_end = m->crtc_vsync_start + 1; |
| } |
| |
| decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID, 0); |
| |
| /* enable clock gate */ |
| val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; |
| writel(val, ctx->addr + DECON_CMU); |
| |
| /* lcd on and use command if */ |
| val = VIDOUT_LCD_ON; |
| if (ctx->out_type == IFTYPE_I80) |
| val |= VIDOUT_COMMAND_IF; |
| else |
| val |= VIDOUT_RGB_IF; |
| writel(val, ctx->addr + DECON_VIDOUTCON0); |
| |
| val = VIDTCON2_LINEVAL(m->vdisplay - 1) | |
| VIDTCON2_HOZVAL(m->hdisplay - 1); |
| writel(val, ctx->addr + DECON_VIDTCON2); |
| |
| if (ctx->out_type != IFTYPE_I80) { |
| val = VIDTCON00_VBPD_F( |
| m->crtc_vtotal - m->crtc_vsync_end - 1) | |
| VIDTCON00_VFPD_F( |
| m->crtc_vsync_start - m->crtc_vdisplay - 1); |
| writel(val, ctx->addr + DECON_VIDTCON00); |
| |
| val = VIDTCON01_VSPW_F( |
| m->crtc_vsync_end - m->crtc_vsync_start - 1); |
| writel(val, ctx->addr + DECON_VIDTCON01); |
| |
| val = VIDTCON10_HBPD_F( |
| m->crtc_htotal - m->crtc_hsync_end - 1) | |
| VIDTCON10_HFPD_F( |
| m->crtc_hsync_start - m->crtc_hdisplay - 1); |
| writel(val, ctx->addr + DECON_VIDTCON10); |
| |
| val = VIDTCON11_HSPW_F( |
| m->crtc_hsync_end - m->crtc_hsync_start - 1); |
| writel(val, ctx->addr + DECON_VIDTCON11); |
| } |
| |
| decon_setup_trigger(ctx); |
| |
| /* enable output and display signal */ |
| decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0); |
| } |
| |
| static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, |
| struct drm_framebuffer *fb) |
| { |
| unsigned long val; |
| |
| val = readl(ctx->addr + DECON_WINCONx(win)); |
| val &= ~WINCONx_BPPMODE_MASK; |
| |
| switch (fb->pixel_format) { |
| case DRM_FORMAT_XRGB1555: |
| val |= WINCONx_BPPMODE_16BPP_I1555; |
| val |= WINCONx_HAWSWP_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_RGB565: |
| val |= WINCONx_BPPMODE_16BPP_565; |
| val |= WINCONx_HAWSWP_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| val |= WINCONx_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_ARGB8888: |
| val |= WINCONx_BPPMODE_32BPP_A8888; |
| val |= WINCONx_WSWP_F | WINCONx_BLD_PIX_F | WINCONx_ALPHA_SEL_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| default: |
| DRM_ERROR("Proper pixel format is not set\n"); |
| return; |
| } |
| |
| DRM_DEBUG_KMS("bpp = %u\n", fb->bits_per_pixel); |
| |
| /* |
| * In case of exynos, setting dma-burst to 16Word causes permanent |
| * tearing for very small buffers, e.g. cursor buffer. Burst Mode |
| * switching which is based on plane size is not recommended as |
| * plane size varies a lot towards the end of the screen and rapid |
| * movement causes unstable DMA which results into iommu crash/tear. |
| */ |
| |
| if (fb->width < MIN_FB_WIDTH_FOR_16WORD_BURST) { |
| val &= ~WINCONx_BURSTLEN_MASK; |
| val |= WINCONx_BURSTLEN_8WORD; |
| } |
| |
| writel(val, ctx->addr + DECON_WINCONx(win)); |
| } |
| |
| static void decon_shadow_protect_win(struct decon_context *ctx, int win, |
| bool protect) |
| { |
| decon_set_bits(ctx, DECON_SHADOWCON, SHADOWCON_Wx_PROTECT(win), |
| protect ? ~0 : 0); |
| } |
| |
| static void decon_atomic_begin(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| decon_shadow_protect_win(ctx, plane->zpos, true); |
| } |
| |
| #define BIT_VAL(x, e, s) (((x) & ((1 << ((e) - (s) + 1)) - 1)) << (s)) |
| #define COORDINATE_X(x) BIT_VAL((x), 23, 12) |
| #define COORDINATE_Y(x) BIT_VAL((x), 11, 0) |
| |
| static void decon_update_plane(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct exynos_drm_plane_state *state = |
| to_exynos_plane_state(plane->base.state); |
| struct decon_context *ctx = crtc->ctx; |
| struct drm_framebuffer *fb = state->base.fb; |
| unsigned int win = plane->zpos; |
| unsigned int bpp = fb->bits_per_pixel >> 3; |
| unsigned int pitch = fb->pitches[0]; |
| dma_addr_t dma_addr = exynos_drm_fb_dma_addr(fb, 0); |
| u32 val; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| val = COORDINATE_X(state->crtc.x) | COORDINATE_Y(state->crtc.y); |
| writel(val, ctx->addr + DECON_VIDOSDxA(win)); |
| |
| val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) | |
| COORDINATE_Y(state->crtc.y + state->crtc.h - 1); |
| writel(val, ctx->addr + DECON_VIDOSDxB(win)); |
| |
| val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) | |
| VIDOSD_Wx_ALPHA_B_F(0x0); |
| writel(val, ctx->addr + DECON_VIDOSDxC(win)); |
| |
| val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) | |
| VIDOSD_Wx_ALPHA_B_F(0x0); |
| writel(val, ctx->addr + DECON_VIDOSDxD(win)); |
| |
| writel(dma_addr, ctx->addr + DECON_VIDW0xADD0B0(win)); |
| |
| val = dma_addr + pitch * state->src.h; |
| writel(val, ctx->addr + DECON_VIDW0xADD1B0(win)); |
| |
| if (ctx->out_type != IFTYPE_HDMI) |
| val = BIT_VAL(pitch - state->crtc.w * bpp, 27, 14) |
| | BIT_VAL(state->crtc.w * bpp, 13, 0); |
| else |
| val = BIT_VAL(pitch - state->crtc.w * bpp, 29, 15) |
| | BIT_VAL(state->crtc.w * bpp, 14, 0); |
| writel(val, ctx->addr + DECON_VIDW0xADD2(win)); |
| |
| decon_win_set_pixfmt(ctx, win, fb); |
| |
| /* window enable */ |
| decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, ~0); |
| |
| /* standalone update */ |
| decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); |
| } |
| |
| static void decon_disable_plane(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| unsigned int win = plane->zpos; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| decon_shadow_protect_win(ctx, win, true); |
| |
| /* window disable */ |
| decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0); |
| |
| decon_shadow_protect_win(ctx, win, false); |
| |
| /* standalone update */ |
| decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); |
| } |
| |
| static void decon_atomic_flush(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| decon_shadow_protect_win(ctx, plane->zpos, false); |
| |
| if (ctx->out_type == IFTYPE_I80) |
| set_bit(BIT_WIN_UPDATED, &ctx->flags); |
| } |
| |
| static void decon_swreset(struct decon_context *ctx) |
| { |
| unsigned int tries; |
| |
| writel(0, ctx->addr + DECON_VIDCON0); |
| for (tries = 2000; tries; --tries) { |
| if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_STOP_STATUS) |
| break; |
| udelay(10); |
| } |
| |
| WARN(tries == 0, "failed to disable DECON\n"); |
| |
| writel(VIDCON0_SWRESET, ctx->addr + DECON_VIDCON0); |
| for (tries = 2000; tries; --tries) { |
| if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_SWRESET) |
| break; |
| udelay(10); |
| } |
| |
| WARN(tries == 0, "failed to software reset DECON\n"); |
| |
| if (ctx->out_type != IFTYPE_HDMI) |
| return; |
| |
| writel(VIDCON0_CLKVALUP | VIDCON0_VLCKFREE, ctx->addr + DECON_VIDCON0); |
| decon_set_bits(ctx, DECON_CMU, |
| CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F, ~0); |
| writel(VIDCON1_VCLK_RUN_VDEN_DISABLE, ctx->addr + DECON_VIDCON1); |
| writel(CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F | CRCCTRL_CRCCLKEN, |
| ctx->addr + DECON_CRCCTRL); |
| decon_setup_trigger(ctx); |
| } |
| |
| static void decon_enable(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| if (!test_and_clear_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| pm_runtime_get_sync(ctx->dev); |
| |
| set_bit(BIT_CLKS_ENABLED, &ctx->flags); |
| |
| /* if vblank was enabled status, enable it again. */ |
| if (test_and_clear_bit(BIT_IRQS_ENABLED, &ctx->flags)) |
| decon_enable_vblank(ctx->crtc); |
| |
| decon_commit(ctx->crtc); |
| |
| set_bit(BIT_SUSPENDED, &ctx->flags); |
| } |
| |
| static void decon_disable(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| int i; |
| |
| if (test_bit(BIT_SUSPENDED, &ctx->flags)) |
| return; |
| |
| /* |
| * We need to make sure that all windows are disabled before we |
| * suspend that connector. Otherwise we might try to scan from |
| * a destroyed buffer later. |
| */ |
| for (i = ctx->first_win; i < WINDOWS_NR; i++) |
| decon_disable_plane(crtc, &ctx->planes[i]); |
| |
| decon_swreset(ctx); |
| |
| clear_bit(BIT_CLKS_ENABLED, &ctx->flags); |
| |
| pm_runtime_put_sync(ctx->dev); |
| |
| set_bit(BIT_SUSPENDED, &ctx->flags); |
| } |
| |
| void decon_te_irq_handler(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| if (!test_bit(BIT_CLKS_ENABLED, &ctx->flags)) |
| return; |
| |
| if (test_and_clear_bit(BIT_WIN_UPDATED, &ctx->flags)) |
| decon_set_bits(ctx, DECON_TRIGCON, TRIGCON_SWTRIGCMD, ~0); |
| |
| drm_crtc_handle_vblank(&ctx->crtc->base); |
| } |
| |
| static void decon_clear_channels(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| int win, i, ret; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { |
| ret = clk_prepare_enable(ctx->clks[i]); |
| if (ret < 0) |
| goto err; |
| } |
| |
| for (win = 0; win < WINDOWS_NR; win++) { |
| decon_shadow_protect_win(ctx, win, true); |
| decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0); |
| decon_shadow_protect_win(ctx, win, false); |
| decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); |
| } |
| /* TODO: wait for possible vsync */ |
| msleep(50); |
| |
| err: |
| while (--i >= 0) |
| clk_disable_unprepare(ctx->clks[i]); |
| } |
| |
| static struct exynos_drm_crtc_ops decon_crtc_ops = { |
| .enable = decon_enable, |
| .disable = decon_disable, |
| .enable_vblank = decon_enable_vblank, |
| .disable_vblank = decon_disable_vblank, |
| .atomic_begin = decon_atomic_begin, |
| .update_plane = decon_update_plane, |
| .disable_plane = decon_disable_plane, |
| .atomic_flush = decon_atomic_flush, |
| .te_handler = decon_te_irq_handler, |
| }; |
| |
| static int decon_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| struct drm_device *drm_dev = data; |
| struct exynos_drm_private *priv = drm_dev->dev_private; |
| struct exynos_drm_plane *exynos_plane; |
| enum exynos_drm_output_type out_type; |
| enum drm_plane_type type; |
| unsigned int win; |
| int ret; |
| |
| ctx->drm_dev = drm_dev; |
| ctx->pipe = priv->pipe++; |
| |
| for (win = ctx->first_win; win < WINDOWS_NR; win++) { |
| int tmp = (win == ctx->first_win) ? 0 : win; |
| |
| type = exynos_plane_get_type(tmp, CURSOR_WIN); |
| ret = exynos_plane_init(drm_dev, &ctx->planes[win], |
| 1 << ctx->pipe, type, decon_formats, |
| ARRAY_SIZE(decon_formats), win); |
| if (ret) |
| return ret; |
| } |
| |
| exynos_plane = &ctx->planes[ctx->first_win]; |
| out_type = (ctx->out_type == IFTYPE_HDMI) ? EXYNOS_DISPLAY_TYPE_HDMI |
| : EXYNOS_DISPLAY_TYPE_LCD; |
| ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base, |
| ctx->pipe, out_type, |
| &decon_crtc_ops, ctx); |
| if (IS_ERR(ctx->crtc)) { |
| ret = PTR_ERR(ctx->crtc); |
| goto err; |
| } |
| |
| decon_clear_channels(ctx->crtc); |
| |
| ret = drm_iommu_attach_device(drm_dev, dev); |
| if (ret) |
| goto err; |
| |
| return ret; |
| err: |
| priv->pipe--; |
| return ret; |
| } |
| |
| static void decon_unbind(struct device *dev, struct device *master, void *data) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| |
| decon_disable(ctx->crtc); |
| |
| /* detach this sub driver from iommu mapping if supported. */ |
| drm_iommu_detach_device(ctx->drm_dev, ctx->dev); |
| } |
| |
| static const struct component_ops decon_component_ops = { |
| .bind = decon_bind, |
| .unbind = decon_unbind, |
| }; |
| |
| static irqreturn_t decon_irq_handler(int irq, void *dev_id) |
| { |
| struct decon_context *ctx = dev_id; |
| u32 val; |
| int win; |
| |
| if (!test_bit(BIT_CLKS_ENABLED, &ctx->flags)) |
| goto out; |
| |
| val = readl(ctx->addr + DECON_VIDINTCON1); |
| val &= VIDINTCON1_INTFRMDONEPEND | VIDINTCON1_INTFRMPEND; |
| |
| if (val) { |
| for (win = ctx->first_win; win < WINDOWS_NR ; win++) { |
| struct exynos_drm_plane *plane = &ctx->planes[win]; |
| |
| if (!plane->pending_fb) |
| continue; |
| |
| exynos_drm_crtc_finish_update(ctx->crtc, plane); |
| } |
| |
| /* clear */ |
| writel(val, ctx->addr + DECON_VIDINTCON1); |
| } |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_PM |
| static int exynos5433_decon_suspend(struct device *dev) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) |
| clk_disable_unprepare(ctx->clks[i]); |
| |
| return 0; |
| } |
| |
| static int exynos5433_decon_resume(struct device *dev) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| int i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { |
| ret = clk_prepare_enable(ctx->clks[i]); |
| if (ret < 0) |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| while (--i >= 0) |
| clk_disable_unprepare(ctx->clks[i]); |
| |
| return ret; |
| } |
| #endif |
| |
| static const struct dev_pm_ops exynos5433_decon_pm_ops = { |
| SET_RUNTIME_PM_OPS(exynos5433_decon_suspend, exynos5433_decon_resume, |
| NULL) |
| }; |
| |
| static const struct of_device_id exynos5433_decon_driver_dt_match[] = { |
| { |
| .compatible = "samsung,exynos5433-decon", |
| .data = (void *)IFTYPE_RGB |
| }, |
| { |
| .compatible = "samsung,exynos5433-decon-tv", |
| .data = (void *)IFTYPE_HDMI |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match); |
| |
| static int exynos5433_decon_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id; |
| struct device *dev = &pdev->dev; |
| struct decon_context *ctx; |
| struct resource *res; |
| int ret; |
| int i; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| __set_bit(BIT_SUSPENDED, &ctx->flags); |
| ctx->dev = dev; |
| |
| of_id = of_match_device(exynos5433_decon_driver_dt_match, &pdev->dev); |
| ctx->out_type = (enum decon_iftype)of_id->data; |
| |
| if (ctx->out_type == IFTYPE_HDMI) |
| ctx->first_win = 1; |
| else if (of_get_child_by_name(dev->of_node, "i80-if-timings")) |
| ctx->out_type = IFTYPE_I80; |
| |
| for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { |
| struct clk *clk; |
| |
| clk = devm_clk_get(ctx->dev, decon_clks_name[i]); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| ctx->clks[i] = clk; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "cannot find IO resource\n"); |
| return -ENXIO; |
| } |
| |
| ctx->addr = devm_ioremap_resource(dev, res); |
| if (IS_ERR(ctx->addr)) { |
| dev_err(dev, "ioremap failed\n"); |
| return PTR_ERR(ctx->addr); |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, |
| (ctx->out_type == IFTYPE_I80) ? "lcd_sys" : "vsync"); |
| if (!res) { |
| dev_err(dev, "cannot find IRQ resource\n"); |
| return -ENXIO; |
| } |
| |
| ret = devm_request_irq(dev, res->start, decon_irq_handler, 0, |
| "drm_decon", ctx); |
| if (ret < 0) { |
| dev_err(dev, "lcd_sys irq request failed\n"); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, ctx); |
| |
| pm_runtime_enable(dev); |
| |
| ret = component_add(dev, &decon_component_ops); |
| if (ret) |
| goto err_disable_pm_runtime; |
| |
| return 0; |
| |
| err_disable_pm_runtime: |
| pm_runtime_disable(dev); |
| |
| return ret; |
| } |
| |
| static int exynos5433_decon_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| |
| component_del(&pdev->dev, &decon_component_ops); |
| |
| return 0; |
| } |
| |
| struct platform_driver exynos5433_decon_driver = { |
| .probe = exynos5433_decon_probe, |
| .remove = exynos5433_decon_remove, |
| .driver = { |
| .name = "exynos5433-decon", |
| .pm = &exynos5433_decon_pm_ops, |
| .of_match_table = exynos5433_decon_driver_dt_match, |
| }, |
| }; |