| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2018 Intel Corporation */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/if_vlan.h> |
| #include <linux/aer.h> |
| |
| #include "igc.h" |
| #include "igc_hw.h" |
| |
| #define DRV_VERSION "0.0.1-k" |
| #define DRV_SUMMARY "Intel(R) 2.5G Ethernet Linux Driver" |
| |
| static int debug = -1; |
| |
| MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); |
| MODULE_DESCRIPTION(DRV_SUMMARY); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION(DRV_VERSION); |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
| |
| char igc_driver_name[] = "igc"; |
| char igc_driver_version[] = DRV_VERSION; |
| static const char igc_driver_string[] = DRV_SUMMARY; |
| static const char igc_copyright[] = |
| "Copyright(c) 2018 Intel Corporation."; |
| |
| static const struct igc_info *igc_info_tbl[] = { |
| [board_base] = &igc_base_info, |
| }; |
| |
| static const struct pci_device_id igc_pci_tbl[] = { |
| { PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_LM), board_base }, |
| { PCI_VDEVICE(INTEL, IGC_DEV_ID_I225_V), board_base }, |
| /* required last entry */ |
| {0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, igc_pci_tbl); |
| |
| /* forward declaration */ |
| static void igc_clean_tx_ring(struct igc_ring *tx_ring); |
| static int igc_sw_init(struct igc_adapter *); |
| static void igc_configure(struct igc_adapter *adapter); |
| static void igc_power_down_link(struct igc_adapter *adapter); |
| static void igc_set_default_mac_filter(struct igc_adapter *adapter); |
| static void igc_set_rx_mode(struct net_device *netdev); |
| static void igc_write_itr(struct igc_q_vector *q_vector); |
| static void igc_assign_vector(struct igc_q_vector *q_vector, int msix_vector); |
| static void igc_free_q_vector(struct igc_adapter *adapter, int v_idx); |
| static void igc_set_interrupt_capability(struct igc_adapter *adapter, |
| bool msix); |
| static void igc_free_q_vectors(struct igc_adapter *adapter); |
| static void igc_irq_disable(struct igc_adapter *adapter); |
| static void igc_irq_enable(struct igc_adapter *adapter); |
| static void igc_configure_msix(struct igc_adapter *adapter); |
| static bool igc_alloc_mapped_page(struct igc_ring *rx_ring, |
| struct igc_rx_buffer *bi); |
| |
| enum latency_range { |
| lowest_latency = 0, |
| low_latency = 1, |
| bulk_latency = 2, |
| latency_invalid = 255 |
| }; |
| |
| static void igc_reset(struct igc_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| struct igc_hw *hw = &adapter->hw; |
| |
| hw->mac.ops.reset_hw(hw); |
| |
| if (hw->mac.ops.init_hw(hw)) |
| dev_err(&pdev->dev, "Hardware Error\n"); |
| |
| if (!netif_running(adapter->netdev)) |
| igc_power_down_link(adapter); |
| |
| igc_get_phy_info(hw); |
| } |
| |
| /** |
| * igc_power_up_link - Power up the phy/serdes link |
| * @adapter: address of board private structure |
| */ |
| static void igc_power_up_link(struct igc_adapter *adapter) |
| { |
| igc_reset_phy(&adapter->hw); |
| |
| if (adapter->hw.phy.media_type == igc_media_type_copper) |
| igc_power_up_phy_copper(&adapter->hw); |
| |
| igc_setup_link(&adapter->hw); |
| } |
| |
| /** |
| * igc_power_down_link - Power down the phy/serdes link |
| * @adapter: address of board private structure |
| */ |
| static void igc_power_down_link(struct igc_adapter *adapter) |
| { |
| if (adapter->hw.phy.media_type == igc_media_type_copper) |
| igc_power_down_phy_copper_base(&adapter->hw); |
| } |
| |
| /** |
| * igc_release_hw_control - release control of the h/w to f/w |
| * @adapter: address of board private structure |
| * |
| * igc_release_hw_control resets CTRL_EXT:DRV_LOAD bit. |
| * For ASF and Pass Through versions of f/w this means that the |
| * driver is no longer loaded. |
| */ |
| static void igc_release_hw_control(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| u32 ctrl_ext; |
| |
| /* Let firmware take over control of h/w */ |
| ctrl_ext = rd32(IGC_CTRL_EXT); |
| wr32(IGC_CTRL_EXT, |
| ctrl_ext & ~IGC_CTRL_EXT_DRV_LOAD); |
| } |
| |
| /** |
| * igc_get_hw_control - get control of the h/w from f/w |
| * @adapter: address of board private structure |
| * |
| * igc_get_hw_control sets CTRL_EXT:DRV_LOAD bit. |
| * For ASF and Pass Through versions of f/w this means that |
| * the driver is loaded. |
| */ |
| static void igc_get_hw_control(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| u32 ctrl_ext; |
| |
| /* Let firmware know the driver has taken over */ |
| ctrl_ext = rd32(IGC_CTRL_EXT); |
| wr32(IGC_CTRL_EXT, |
| ctrl_ext | IGC_CTRL_EXT_DRV_LOAD); |
| } |
| |
| /** |
| * igc_free_tx_resources - Free Tx Resources per Queue |
| * @tx_ring: Tx descriptor ring for a specific queue |
| * |
| * Free all transmit software resources |
| */ |
| static void igc_free_tx_resources(struct igc_ring *tx_ring) |
| { |
| igc_clean_tx_ring(tx_ring); |
| |
| vfree(tx_ring->tx_buffer_info); |
| tx_ring->tx_buffer_info = NULL; |
| |
| /* if not set, then don't free */ |
| if (!tx_ring->desc) |
| return; |
| |
| dma_free_coherent(tx_ring->dev, tx_ring->size, |
| tx_ring->desc, tx_ring->dma); |
| |
| tx_ring->desc = NULL; |
| } |
| |
| /** |
| * igc_free_all_tx_resources - Free Tx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| */ |
| static void igc_free_all_tx_resources(struct igc_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| igc_free_tx_resources(adapter->tx_ring[i]); |
| } |
| |
| /** |
| * igc_clean_tx_ring - Free Tx Buffers |
| * @tx_ring: ring to be cleaned |
| */ |
| static void igc_clean_tx_ring(struct igc_ring *tx_ring) |
| { |
| u16 i = tx_ring->next_to_clean; |
| struct igc_tx_buffer *tx_buffer = &tx_ring->tx_buffer_info[i]; |
| |
| while (i != tx_ring->next_to_use) { |
| union igc_adv_tx_desc *eop_desc, *tx_desc; |
| |
| /* Free all the Tx ring sk_buffs */ |
| dev_kfree_skb_any(tx_buffer->skb); |
| |
| /* unmap skb header data */ |
| dma_unmap_single(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| |
| /* check for eop_desc to determine the end of the packet */ |
| eop_desc = tx_buffer->next_to_watch; |
| tx_desc = IGC_TX_DESC(tx_ring, i); |
| |
| /* unmap remaining buffers */ |
| while (tx_desc != eop_desc) { |
| tx_buffer++; |
| tx_desc++; |
| i++; |
| if (unlikely(i == tx_ring->count)) { |
| i = 0; |
| tx_buffer = tx_ring->tx_buffer_info; |
| tx_desc = IGC_TX_DESC(tx_ring, 0); |
| } |
| |
| /* unmap any remaining paged data */ |
| if (dma_unmap_len(tx_buffer, len)) |
| dma_unmap_page(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| } |
| |
| /* move us one more past the eop_desc for start of next pkt */ |
| tx_buffer++; |
| i++; |
| if (unlikely(i == tx_ring->count)) { |
| i = 0; |
| tx_buffer = tx_ring->tx_buffer_info; |
| } |
| } |
| |
| /* reset BQL for queue */ |
| netdev_tx_reset_queue(txring_txq(tx_ring)); |
| |
| /* reset next_to_use and next_to_clean */ |
| tx_ring->next_to_use = 0; |
| tx_ring->next_to_clean = 0; |
| } |
| |
| /** |
| * igc_clean_all_tx_rings - Free Tx Buffers for all queues |
| * @adapter: board private structure |
| */ |
| static void igc_clean_all_tx_rings(struct igc_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| if (adapter->tx_ring[i]) |
| igc_clean_tx_ring(adapter->tx_ring[i]); |
| } |
| |
| /** |
| * igc_setup_tx_resources - allocate Tx resources (Descriptors) |
| * @tx_ring: tx descriptor ring (for a specific queue) to setup |
| * |
| * Return 0 on success, negative on failure |
| */ |
| static int igc_setup_tx_resources(struct igc_ring *tx_ring) |
| { |
| struct device *dev = tx_ring->dev; |
| int size = 0; |
| |
| size = sizeof(struct igc_tx_buffer) * tx_ring->count; |
| tx_ring->tx_buffer_info = vzalloc(size); |
| if (!tx_ring->tx_buffer_info) |
| goto err; |
| |
| /* round up to nearest 4K */ |
| tx_ring->size = tx_ring->count * sizeof(union igc_adv_tx_desc); |
| tx_ring->size = ALIGN(tx_ring->size, 4096); |
| |
| tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, |
| &tx_ring->dma, GFP_KERNEL); |
| |
| if (!tx_ring->desc) |
| goto err; |
| |
| tx_ring->next_to_use = 0; |
| tx_ring->next_to_clean = 0; |
| |
| return 0; |
| |
| err: |
| vfree(tx_ring->tx_buffer_info); |
| dev_err(dev, |
| "Unable to allocate memory for the transmit descriptor ring\n"); |
| return -ENOMEM; |
| } |
| |
| /** |
| * igc_setup_all_tx_resources - wrapper to allocate Tx resources for all queues |
| * @adapter: board private structure |
| * |
| * Return 0 on success, negative on failure |
| */ |
| static int igc_setup_all_tx_resources(struct igc_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| err = igc_setup_tx_resources(adapter->tx_ring[i]); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Allocation for Tx Queue %u failed\n", i); |
| for (i--; i >= 0; i--) |
| igc_free_tx_resources(adapter->tx_ring[i]); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| /** |
| * igc_clean_rx_ring - Free Rx Buffers per Queue |
| * @rx_ring: ring to free buffers from |
| */ |
| static void igc_clean_rx_ring(struct igc_ring *rx_ring) |
| { |
| u16 i = rx_ring->next_to_clean; |
| |
| if (rx_ring->skb) |
| dev_kfree_skb(rx_ring->skb); |
| rx_ring->skb = NULL; |
| |
| /* Free all the Rx ring sk_buffs */ |
| while (i != rx_ring->next_to_alloc) { |
| struct igc_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i]; |
| |
| /* Invalidate cache lines that may have been written to by |
| * device so that we avoid corrupting memory. |
| */ |
| dma_sync_single_range_for_cpu(rx_ring->dev, |
| buffer_info->dma, |
| buffer_info->page_offset, |
| igc_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| |
| /* free resources associated with mapping */ |
| dma_unmap_page_attrs(rx_ring->dev, |
| buffer_info->dma, |
| igc_rx_pg_size(rx_ring), |
| DMA_FROM_DEVICE, |
| IGC_RX_DMA_ATTR); |
| __page_frag_cache_drain(buffer_info->page, |
| buffer_info->pagecnt_bias); |
| |
| i++; |
| if (i == rx_ring->count) |
| i = 0; |
| } |
| |
| rx_ring->next_to_alloc = 0; |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| } |
| |
| /** |
| * igc_clean_all_rx_rings - Free Rx Buffers for all queues |
| * @adapter: board private structure |
| */ |
| static void igc_clean_all_rx_rings(struct igc_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| if (adapter->rx_ring[i]) |
| igc_clean_rx_ring(adapter->rx_ring[i]); |
| } |
| |
| /** |
| * igc_free_rx_resources - Free Rx Resources |
| * @rx_ring: ring to clean the resources from |
| * |
| * Free all receive software resources |
| */ |
| static void igc_free_rx_resources(struct igc_ring *rx_ring) |
| { |
| igc_clean_rx_ring(rx_ring); |
| |
| vfree(rx_ring->rx_buffer_info); |
| rx_ring->rx_buffer_info = NULL; |
| |
| /* if not set, then don't free */ |
| if (!rx_ring->desc) |
| return; |
| |
| dma_free_coherent(rx_ring->dev, rx_ring->size, |
| rx_ring->desc, rx_ring->dma); |
| |
| rx_ring->desc = NULL; |
| } |
| |
| /** |
| * igc_free_all_rx_resources - Free Rx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all receive software resources |
| */ |
| static void igc_free_all_rx_resources(struct igc_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| igc_free_rx_resources(adapter->rx_ring[i]); |
| } |
| |
| /** |
| * igc_setup_rx_resources - allocate Rx resources (Descriptors) |
| * @rx_ring: rx descriptor ring (for a specific queue) to setup |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int igc_setup_rx_resources(struct igc_ring *rx_ring) |
| { |
| struct device *dev = rx_ring->dev; |
| int size, desc_len; |
| |
| size = sizeof(struct igc_rx_buffer) * rx_ring->count; |
| rx_ring->rx_buffer_info = vzalloc(size); |
| if (!rx_ring->rx_buffer_info) |
| goto err; |
| |
| desc_len = sizeof(union igc_adv_rx_desc); |
| |
| /* Round up to nearest 4K */ |
| rx_ring->size = rx_ring->count * desc_len; |
| rx_ring->size = ALIGN(rx_ring->size, 4096); |
| |
| rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, |
| &rx_ring->dma, GFP_KERNEL); |
| |
| if (!rx_ring->desc) |
| goto err; |
| |
| rx_ring->next_to_alloc = 0; |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| |
| return 0; |
| |
| err: |
| vfree(rx_ring->rx_buffer_info); |
| rx_ring->rx_buffer_info = NULL; |
| dev_err(dev, |
| "Unable to allocate memory for the receive descriptor ring\n"); |
| return -ENOMEM; |
| } |
| |
| /** |
| * igc_setup_all_rx_resources - wrapper to allocate Rx resources |
| * (Descriptors) for all queues |
| * @adapter: board private structure |
| * |
| * Return 0 on success, negative on failure |
| */ |
| static int igc_setup_all_rx_resources(struct igc_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| err = igc_setup_rx_resources(adapter->rx_ring[i]); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Allocation for Rx Queue %u failed\n", i); |
| for (i--; i >= 0; i--) |
| igc_free_rx_resources(adapter->rx_ring[i]); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| /** |
| * igc_configure_rx_ring - Configure a receive ring after Reset |
| * @adapter: board private structure |
| * @ring: receive ring to be configured |
| * |
| * Configure the Rx unit of the MAC after a reset. |
| */ |
| static void igc_configure_rx_ring(struct igc_adapter *adapter, |
| struct igc_ring *ring) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| union igc_adv_rx_desc *rx_desc; |
| int reg_idx = ring->reg_idx; |
| u32 srrctl = 0, rxdctl = 0; |
| u64 rdba = ring->dma; |
| |
| /* disable the queue */ |
| wr32(IGC_RXDCTL(reg_idx), 0); |
| |
| /* Set DMA base address registers */ |
| wr32(IGC_RDBAL(reg_idx), |
| rdba & 0x00000000ffffffffULL); |
| wr32(IGC_RDBAH(reg_idx), rdba >> 32); |
| wr32(IGC_RDLEN(reg_idx), |
| ring->count * sizeof(union igc_adv_rx_desc)); |
| |
| /* initialize head and tail */ |
| ring->tail = adapter->io_addr + IGC_RDT(reg_idx); |
| wr32(IGC_RDH(reg_idx), 0); |
| writel(0, ring->tail); |
| |
| /* reset next-to- use/clean to place SW in sync with hardware */ |
| ring->next_to_clean = 0; |
| ring->next_to_use = 0; |
| |
| /* set descriptor configuration */ |
| srrctl = IGC_RX_HDR_LEN << IGC_SRRCTL_BSIZEHDRSIZE_SHIFT; |
| if (ring_uses_large_buffer(ring)) |
| srrctl |= IGC_RXBUFFER_3072 >> IGC_SRRCTL_BSIZEPKT_SHIFT; |
| else |
| srrctl |= IGC_RXBUFFER_2048 >> IGC_SRRCTL_BSIZEPKT_SHIFT; |
| srrctl |= IGC_SRRCTL_DESCTYPE_ADV_ONEBUF; |
| |
| wr32(IGC_SRRCTL(reg_idx), srrctl); |
| |
| rxdctl |= IGC_RX_PTHRESH; |
| rxdctl |= IGC_RX_HTHRESH << 8; |
| rxdctl |= IGC_RX_WTHRESH << 16; |
| |
| /* initialize rx_buffer_info */ |
| memset(ring->rx_buffer_info, 0, |
| sizeof(struct igc_rx_buffer) * ring->count); |
| |
| /* initialize Rx descriptor 0 */ |
| rx_desc = IGC_RX_DESC(ring, 0); |
| rx_desc->wb.upper.length = 0; |
| |
| /* enable receive descriptor fetching */ |
| rxdctl |= IGC_RXDCTL_QUEUE_ENABLE; |
| |
| wr32(IGC_RXDCTL(reg_idx), rxdctl); |
| } |
| |
| /** |
| * igc_configure_rx - Configure receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Rx unit of the MAC after a reset. |
| */ |
| static void igc_configure_rx(struct igc_adapter *adapter) |
| { |
| int i; |
| |
| /* Setup the HW Rx Head and Tail Descriptor Pointers and |
| * the Base and Length of the Rx Descriptor Ring |
| */ |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| igc_configure_rx_ring(adapter, adapter->rx_ring[i]); |
| } |
| |
| /** |
| * igc_configure_tx_ring - Configure transmit ring after Reset |
| * @adapter: board private structure |
| * @ring: tx ring to configure |
| * |
| * Configure a transmit ring after a reset. |
| */ |
| static void igc_configure_tx_ring(struct igc_adapter *adapter, |
| struct igc_ring *ring) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| int reg_idx = ring->reg_idx; |
| u64 tdba = ring->dma; |
| u32 txdctl = 0; |
| |
| /* disable the queue */ |
| wr32(IGC_TXDCTL(reg_idx), 0); |
| wrfl(); |
| mdelay(10); |
| |
| wr32(IGC_TDLEN(reg_idx), |
| ring->count * sizeof(union igc_adv_tx_desc)); |
| wr32(IGC_TDBAL(reg_idx), |
| tdba & 0x00000000ffffffffULL); |
| wr32(IGC_TDBAH(reg_idx), tdba >> 32); |
| |
| ring->tail = adapter->io_addr + IGC_TDT(reg_idx); |
| wr32(IGC_TDH(reg_idx), 0); |
| writel(0, ring->tail); |
| |
| txdctl |= IGC_TX_PTHRESH; |
| txdctl |= IGC_TX_HTHRESH << 8; |
| txdctl |= IGC_TX_WTHRESH << 16; |
| |
| txdctl |= IGC_TXDCTL_QUEUE_ENABLE; |
| wr32(IGC_TXDCTL(reg_idx), txdctl); |
| } |
| |
| /** |
| * igc_configure_tx - Configure transmit Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx unit of the MAC after a reset. |
| */ |
| static void igc_configure_tx(struct igc_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| igc_configure_tx_ring(adapter, adapter->tx_ring[i]); |
| } |
| |
| /** |
| * igc_setup_mrqc - configure the multiple receive queue control registers |
| * @adapter: Board private structure |
| */ |
| static void igc_setup_mrqc(struct igc_adapter *adapter) |
| { |
| } |
| |
| /** |
| * igc_setup_rctl - configure the receive control registers |
| * @adapter: Board private structure |
| */ |
| static void igc_setup_rctl(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| u32 rctl; |
| |
| rctl = rd32(IGC_RCTL); |
| |
| rctl &= ~(3 << IGC_RCTL_MO_SHIFT); |
| rctl &= ~(IGC_RCTL_LBM_TCVR | IGC_RCTL_LBM_MAC); |
| |
| rctl |= IGC_RCTL_EN | IGC_RCTL_BAM | IGC_RCTL_RDMTS_HALF | |
| (hw->mac.mc_filter_type << IGC_RCTL_MO_SHIFT); |
| |
| /* enable stripping of CRC. Newer features require |
| * that the HW strips the CRC. |
| */ |
| rctl |= IGC_RCTL_SECRC; |
| |
| /* disable store bad packets and clear size bits. */ |
| rctl &= ~(IGC_RCTL_SBP | IGC_RCTL_SZ_256); |
| |
| /* enable LPE to allow for reception of jumbo frames */ |
| rctl |= IGC_RCTL_LPE; |
| |
| /* disable queue 0 to prevent tail write w/o re-config */ |
| wr32(IGC_RXDCTL(0), 0); |
| |
| /* This is useful for sniffing bad packets. */ |
| if (adapter->netdev->features & NETIF_F_RXALL) { |
| /* UPE and MPE will be handled by normal PROMISC logic |
| * in set_rx_mode |
| */ |
| rctl |= (IGC_RCTL_SBP | /* Receive bad packets */ |
| IGC_RCTL_BAM | /* RX All Bcast Pkts */ |
| IGC_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ |
| |
| rctl &= ~(IGC_RCTL_DPF | /* Allow filtered pause */ |
| IGC_RCTL_CFIEN); /* Disable VLAN CFIEN Filter */ |
| } |
| |
| wr32(IGC_RCTL, rctl); |
| } |
| |
| /** |
| * igc_setup_tctl - configure the transmit control registers |
| * @adapter: Board private structure |
| */ |
| static void igc_setup_tctl(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| u32 tctl; |
| |
| /* disable queue 0 which icould be enabled by default */ |
| wr32(IGC_TXDCTL(0), 0); |
| |
| /* Program the Transmit Control Register */ |
| tctl = rd32(IGC_TCTL); |
| tctl &= ~IGC_TCTL_CT; |
| tctl |= IGC_TCTL_PSP | IGC_TCTL_RTLC | |
| (IGC_COLLISION_THRESHOLD << IGC_CT_SHIFT); |
| |
| /* Enable transmits */ |
| tctl |= IGC_TCTL_EN; |
| |
| wr32(IGC_TCTL, tctl); |
| } |
| |
| /** |
| * igc_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int igc_set_mac(struct net_device *netdev, void *p) |
| { |
| struct igc_adapter *adapter = netdev_priv(netdev); |
| struct igc_hw *hw = &adapter->hw; |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); |
| |
| /* set the correct pool for the new PF MAC address in entry 0 */ |
| igc_set_default_mac_filter(adapter); |
| |
| return 0; |
| } |
| |
| static void igc_tx_csum(struct igc_ring *tx_ring, struct igc_tx_buffer *first) |
| { |
| } |
| |
| static int __igc_maybe_stop_tx(struct igc_ring *tx_ring, const u16 size) |
| { |
| struct net_device *netdev = tx_ring->netdev; |
| |
| netif_stop_subqueue(netdev, tx_ring->queue_index); |
| |
| /* memory barriier comment */ |
| smp_mb(); |
| |
| /* We need to check again in a case another CPU has just |
| * made room available. |
| */ |
| if (igc_desc_unused(tx_ring) < size) |
| return -EBUSY; |
| |
| /* A reprieve! */ |
| netif_wake_subqueue(netdev, tx_ring->queue_index); |
| |
| u64_stats_update_begin(&tx_ring->tx_syncp2); |
| tx_ring->tx_stats.restart_queue2++; |
| u64_stats_update_end(&tx_ring->tx_syncp2); |
| |
| return 0; |
| } |
| |
| static inline int igc_maybe_stop_tx(struct igc_ring *tx_ring, const u16 size) |
| { |
| if (igc_desc_unused(tx_ring) >= size) |
| return 0; |
| return __igc_maybe_stop_tx(tx_ring, size); |
| } |
| |
| static u32 igc_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) |
| { |
| /* set type for advanced descriptor with frame checksum insertion */ |
| u32 cmd_type = IGC_ADVTXD_DTYP_DATA | |
| IGC_ADVTXD_DCMD_DEXT | |
| IGC_ADVTXD_DCMD_IFCS; |
| |
| return cmd_type; |
| } |
| |
| static void igc_tx_olinfo_status(struct igc_ring *tx_ring, |
| union igc_adv_tx_desc *tx_desc, |
| u32 tx_flags, unsigned int paylen) |
| { |
| u32 olinfo_status = paylen << IGC_ADVTXD_PAYLEN_SHIFT; |
| |
| /* insert L4 checksum */ |
| olinfo_status |= (tx_flags & IGC_TX_FLAGS_CSUM) * |
| ((IGC_TXD_POPTS_TXSM << 8) / |
| IGC_TX_FLAGS_CSUM); |
| |
| /* insert IPv4 checksum */ |
| olinfo_status |= (tx_flags & IGC_TX_FLAGS_IPV4) * |
| (((IGC_TXD_POPTS_IXSM << 8)) / |
| IGC_TX_FLAGS_IPV4); |
| |
| tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); |
| } |
| |
| static int igc_tx_map(struct igc_ring *tx_ring, |
| struct igc_tx_buffer *first, |
| const u8 hdr_len) |
| { |
| struct sk_buff *skb = first->skb; |
| struct igc_tx_buffer *tx_buffer; |
| union igc_adv_tx_desc *tx_desc; |
| u32 tx_flags = first->tx_flags; |
| struct skb_frag_struct *frag; |
| u16 i = tx_ring->next_to_use; |
| unsigned int data_len, size; |
| dma_addr_t dma; |
| u32 cmd_type = igc_tx_cmd_type(skb, tx_flags); |
| |
| tx_desc = IGC_TX_DESC(tx_ring, i); |
| |
| igc_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len); |
| |
| size = skb_headlen(skb); |
| data_len = skb->data_len; |
| |
| dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); |
| |
| tx_buffer = first; |
| |
| for (frag = &skb_shinfo(skb)->frags[0];; frag++) { |
| if (dma_mapping_error(tx_ring->dev, dma)) |
| goto dma_error; |
| |
| /* record length, and DMA address */ |
| dma_unmap_len_set(tx_buffer, len, size); |
| dma_unmap_addr_set(tx_buffer, dma, dma); |
| |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); |
| |
| while (unlikely(size > IGC_MAX_DATA_PER_TXD)) { |
| tx_desc->read.cmd_type_len = |
| cpu_to_le32(cmd_type ^ IGC_MAX_DATA_PER_TXD); |
| |
| i++; |
| tx_desc++; |
| if (i == tx_ring->count) { |
| tx_desc = IGC_TX_DESC(tx_ring, 0); |
| i = 0; |
| } |
| tx_desc->read.olinfo_status = 0; |
| |
| dma += IGC_MAX_DATA_PER_TXD; |
| size -= IGC_MAX_DATA_PER_TXD; |
| |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); |
| } |
| |
| if (likely(!data_len)) |
| break; |
| |
| tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); |
| |
| i++; |
| tx_desc++; |
| if (i == tx_ring->count) { |
| tx_desc = IGC_TX_DESC(tx_ring, 0); |
| i = 0; |
| } |
| tx_desc->read.olinfo_status = 0; |
| |
| size = skb_frag_size(frag); |
| data_len -= size; |
| |
| dma = skb_frag_dma_map(tx_ring->dev, frag, 0, |
| size, DMA_TO_DEVICE); |
| |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| } |
| |
| /* write last descriptor with RS and EOP bits */ |
| cmd_type |= size | IGC_TXD_DCMD; |
| tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); |
| |
| netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); |
| |
| /* set the timestamp */ |
| first->time_stamp = jiffies; |
| |
| skb_tx_timestamp(skb); |
| |
| /* Force memory writes to complete before letting h/w know there |
| * are new descriptors to fetch. (Only applicable for weak-ordered |
| * memory model archs, such as IA-64). |
| * |
| * We also need this memory barrier to make certain all of the |
| * status bits have been updated before next_to_watch is written. |
| */ |
| wmb(); |
| |
| /* set next_to_watch value indicating a packet is present */ |
| first->next_to_watch = tx_desc; |
| |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| |
| tx_ring->next_to_use = i; |
| |
| /* Make sure there is space in the ring for the next send. */ |
| igc_maybe_stop_tx(tx_ring, DESC_NEEDED); |
| |
| if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) { |
| writel(i, tx_ring->tail); |
| |
| /* we need this if more than one processor can write to our tail |
| * at a time, it synchronizes IO on IA64/Altix systems |
| */ |
| mmiowb(); |
| } |
| |
| return 0; |
| dma_error: |
| dev_err(tx_ring->dev, "TX DMA map failed\n"); |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| |
| /* clear dma mappings for failed tx_buffer_info map */ |
| while (tx_buffer != first) { |
| if (dma_unmap_len(tx_buffer, len)) |
| dma_unmap_page(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| dma_unmap_len_set(tx_buffer, len, 0); |
| |
| if (i-- == 0) |
| i += tx_ring->count; |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| } |
| |
| if (dma_unmap_len(tx_buffer, len)) |
| dma_unmap_single(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| dma_unmap_len_set(tx_buffer, len, 0); |
| |
| dev_kfree_skb_any(tx_buffer->skb); |
| tx_buffer->skb = NULL; |
| |
| tx_ring->next_to_use = i; |
| |
| return -1; |
| } |
| |
| static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb, |
| struct igc_ring *tx_ring) |
| { |
| u16 count = TXD_USE_COUNT(skb_headlen(skb)); |
| __be16 protocol = vlan_get_protocol(skb); |
| struct igc_tx_buffer *first; |
| u32 tx_flags = 0; |
| unsigned short f; |
| u8 hdr_len = 0; |
| |
| /* need: 1 descriptor per page * PAGE_SIZE/IGC_MAX_DATA_PER_TXD, |
| * + 1 desc for skb_headlen/IGC_MAX_DATA_PER_TXD, |
| * + 2 desc gap to keep tail from touching head, |
| * + 1 desc for context descriptor, |
| * otherwise try next time |
| */ |
| for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) |
| count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); |
| |
| if (igc_maybe_stop_tx(tx_ring, count + 3)) { |
| /* this is a hard error */ |
| return NETDEV_TX_BUSY; |
| } |
| |
| /* record the location of the first descriptor for this packet */ |
| first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; |
| first->skb = skb; |
| first->bytecount = skb->len; |
| first->gso_segs = 1; |
| |
| /* record initial flags and protocol */ |
| first->tx_flags = tx_flags; |
| first->protocol = protocol; |
| |
| igc_tx_csum(tx_ring, first); |
| |
| igc_tx_map(tx_ring, first, hdr_len); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static inline struct igc_ring *igc_tx_queue_mapping(struct igc_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| unsigned int r_idx = skb->queue_mapping; |
| |
| if (r_idx >= adapter->num_tx_queues) |
| r_idx = r_idx % adapter->num_tx_queues; |
| |
| return adapter->tx_ring[r_idx]; |
| } |
| |
| static netdev_tx_t igc_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct igc_adapter *adapter = netdev_priv(netdev); |
| |
| /* The minimum packet size with TCTL.PSP set is 17 so pad the skb |
| * in order to meet this minimum size requirement. |
| */ |
| if (skb->len < 17) { |
| if (skb_padto(skb, 17)) |
| return NETDEV_TX_OK; |
| skb->len = 17; |
| } |
| |
| return igc_xmit_frame_ring(skb, igc_tx_queue_mapping(adapter, skb)); |
| } |
| |
| static inline void igc_rx_hash(struct igc_ring *ring, |
| union igc_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| if (ring->netdev->features & NETIF_F_RXHASH) |
| skb_set_hash(skb, |
| le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), |
| PKT_HASH_TYPE_L3); |
| } |
| |
| /** |
| * igc_process_skb_fields - Populate skb header fields from Rx descriptor |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @rx_desc: pointer to the EOP Rx descriptor |
| * @skb: pointer to current skb being populated |
| * |
| * This function checks the ring, descriptor, and packet information in |
| * order to populate the hash, checksum, VLAN, timestamp, protocol, and |
| * other fields within the skb. |
| */ |
| static void igc_process_skb_fields(struct igc_ring *rx_ring, |
| union igc_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| igc_rx_hash(rx_ring, rx_desc, skb); |
| |
| skb_record_rx_queue(skb, rx_ring->queue_index); |
| |
| skb->protocol = eth_type_trans(skb, rx_ring->netdev); |
| } |
| |
| static struct igc_rx_buffer *igc_get_rx_buffer(struct igc_ring *rx_ring, |
| const unsigned int size) |
| { |
| struct igc_rx_buffer *rx_buffer; |
| |
| rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; |
| prefetchw(rx_buffer->page); |
| |
| /* we are reusing so sync this buffer for CPU use */ |
| dma_sync_single_range_for_cpu(rx_ring->dev, |
| rx_buffer->dma, |
| rx_buffer->page_offset, |
| size, |
| DMA_FROM_DEVICE); |
| |
| rx_buffer->pagecnt_bias--; |
| |
| return rx_buffer; |
| } |
| |
| /** |
| * igc_add_rx_frag - Add contents of Rx buffer to sk_buff |
| * @rx_ring: rx descriptor ring to transact packets on |
| * @rx_buffer: buffer containing page to add |
| * @skb: sk_buff to place the data into |
| * @size: size of buffer to be added |
| * |
| * This function will add the data contained in rx_buffer->page to the skb. |
| */ |
| static void igc_add_rx_frag(struct igc_ring *rx_ring, |
| struct igc_rx_buffer *rx_buffer, |
| struct sk_buff *skb, |
| unsigned int size) |
| { |
| #if (PAGE_SIZE < 8192) |
| unsigned int truesize = igc_rx_pg_size(rx_ring) / 2; |
| |
| skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page, |
| rx_buffer->page_offset, size, truesize); |
| rx_buffer->page_offset ^= truesize; |
| #else |
| unsigned int truesize = ring_uses_build_skb(rx_ring) ? |
| SKB_DATA_ALIGN(IGC_SKB_PAD + size) : |
| SKB_DATA_ALIGN(size); |
| skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page, |
| rx_buffer->page_offset, size, truesize); |
| rx_buffer->page_offset += truesize; |
| #endif |
| } |
| |
| static struct sk_buff *igc_build_skb(struct igc_ring *rx_ring, |
| struct igc_rx_buffer *rx_buffer, |
| union igc_adv_rx_desc *rx_desc, |
| unsigned int size) |
| { |
| void *va = page_address(rx_buffer->page) + rx_buffer->page_offset; |
| #if (PAGE_SIZE < 8192) |
| unsigned int truesize = igc_rx_pg_size(rx_ring) / 2; |
| #else |
| unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + |
| SKB_DATA_ALIGN(IGC_SKB_PAD + size); |
| #endif |
| struct sk_buff *skb; |
| |
| /* prefetch first cache line of first page */ |
| prefetch(va); |
| #if L1_CACHE_BYTES < 128 |
| prefetch(va + L1_CACHE_BYTES); |
| #endif |
| |
| /* build an skb around the page buffer */ |
| skb = build_skb(va - IGC_SKB_PAD, truesize); |
| if (unlikely(!skb)) |
| return NULL; |
| |
| /* update pointers within the skb to store the data */ |
| skb_reserve(skb, IGC_SKB_PAD); |
| __skb_put(skb, size); |
| |
| /* update buffer offset */ |
| #if (PAGE_SIZE < 8192) |
| rx_buffer->page_offset ^= truesize; |
| #else |
| rx_buffer->page_offset += truesize; |
| #endif |
| |
| return skb; |
| } |
| |
| static struct sk_buff *igc_construct_skb(struct igc_ring *rx_ring, |
| struct igc_rx_buffer *rx_buffer, |
| union igc_adv_rx_desc *rx_desc, |
| unsigned int size) |
| { |
| void *va = page_address(rx_buffer->page) + rx_buffer->page_offset; |
| #if (PAGE_SIZE < 8192) |
| unsigned int truesize = igc_rx_pg_size(rx_ring) / 2; |
| #else |
| unsigned int truesize = SKB_DATA_ALIGN(size); |
| #endif |
| unsigned int headlen; |
| struct sk_buff *skb; |
| |
| /* prefetch first cache line of first page */ |
| prefetch(va); |
| #if L1_CACHE_BYTES < 128 |
| prefetch(va + L1_CACHE_BYTES); |
| #endif |
| |
| /* allocate a skb to store the frags */ |
| skb = napi_alloc_skb(&rx_ring->q_vector->napi, IGC_RX_HDR_LEN); |
| if (unlikely(!skb)) |
| return NULL; |
| |
| /* Determine available headroom for copy */ |
| headlen = size; |
| if (headlen > IGC_RX_HDR_LEN) |
| headlen = eth_get_headlen(va, IGC_RX_HDR_LEN); |
| |
| /* align pull length to size of long to optimize memcpy performance */ |
| memcpy(__skb_put(skb, headlen), va, ALIGN(headlen, sizeof(long))); |
| |
| /* update all of the pointers */ |
| size -= headlen; |
| if (size) { |
| skb_add_rx_frag(skb, 0, rx_buffer->page, |
| (va + headlen) - page_address(rx_buffer->page), |
| size, truesize); |
| #if (PAGE_SIZE < 8192) |
| rx_buffer->page_offset ^= truesize; |
| #else |
| rx_buffer->page_offset += truesize; |
| #endif |
| } else { |
| rx_buffer->pagecnt_bias++; |
| } |
| |
| return skb; |
| } |
| |
| /** |
| * igc_reuse_rx_page - page flip buffer and store it back on the ring |
| * @rx_ring: rx descriptor ring to store buffers on |
| * @old_buff: donor buffer to have page reused |
| * |
| * Synchronizes page for reuse by the adapter |
| */ |
| static void igc_reuse_rx_page(struct igc_ring *rx_ring, |
| struct igc_rx_buffer *old_buff) |
| { |
| u16 nta = rx_ring->next_to_alloc; |
| struct igc_rx_buffer *new_buff; |
| |
| new_buff = &rx_ring->rx_buffer_info[nta]; |
| |
| /* update, and store next to alloc */ |
| nta++; |
| rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; |
| |
| /* Transfer page from old buffer to new buffer. |
| * Move each member individually to avoid possible store |
| * forwarding stalls. |
| */ |
| new_buff->dma = old_buff->dma; |
| new_buff->page = old_buff->page; |
| new_buff->page_offset = old_buff->page_offset; |
| new_buff->pagecnt_bias = old_buff->pagecnt_bias; |
| } |
| |
| static inline bool igc_page_is_reserved(struct page *page) |
| { |
| return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page); |
| } |
| |
| static bool igc_can_reuse_rx_page(struct igc_rx_buffer *rx_buffer) |
| { |
| unsigned int pagecnt_bias = rx_buffer->pagecnt_bias; |
| struct page *page = rx_buffer->page; |
| |
| /* avoid re-using remote pages */ |
| if (unlikely(igc_page_is_reserved(page))) |
| return false; |
| |
| #if (PAGE_SIZE < 8192) |
| /* if we are only owner of page we can reuse it */ |
| if (unlikely((page_ref_count(page) - pagecnt_bias) > 1)) |
| return false; |
| #else |
| #define IGC_LAST_OFFSET \ |
| (SKB_WITH_OVERHEAD(PAGE_SIZE) - IGC_RXBUFFER_2048) |
| |
| if (rx_buffer->page_offset > IGC_LAST_OFFSET) |
| return false; |
| #endif |
| |
| /* If we have drained the page fragment pool we need to update |
| * the pagecnt_bias and page count so that we fully restock the |
| * number of references the driver holds. |
| */ |
| if (unlikely(!pagecnt_bias)) { |
| page_ref_add(page, USHRT_MAX); |
| rx_buffer->pagecnt_bias = USHRT_MAX; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * igc_is_non_eop - process handling of non-EOP buffers |
| * @rx_ring: Rx ring being processed |
| * @rx_desc: Rx descriptor for current buffer |
| * @skb: current socket buffer containing buffer in progress |
| * |
| * This function updates next to clean. If the buffer is an EOP buffer |
| * this function exits returning false, otherwise it will place the |
| * sk_buff in the next buffer to be chained and return true indicating |
| * that this is in fact a non-EOP buffer. |
| */ |
| static bool igc_is_non_eop(struct igc_ring *rx_ring, |
| union igc_adv_rx_desc *rx_desc) |
| { |
| u32 ntc = rx_ring->next_to_clean + 1; |
| |
| /* fetch, update, and store next to clean */ |
| ntc = (ntc < rx_ring->count) ? ntc : 0; |
| rx_ring->next_to_clean = ntc; |
| |
| prefetch(IGC_RX_DESC(rx_ring, ntc)); |
| |
| if (likely(igc_test_staterr(rx_desc, IGC_RXD_STAT_EOP))) |
| return false; |
| |
| return true; |
| } |
| |
| /** |
| * igc_cleanup_headers - Correct corrupted or empty headers |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @rx_desc: pointer to the EOP Rx descriptor |
| * @skb: pointer to current skb being fixed |
| * |
| * Address the case where we are pulling data in on pages only |
| * and as such no data is present in the skb header. |
| * |
| * In addition if skb is not at least 60 bytes we need to pad it so that |
| * it is large enough to qualify as a valid Ethernet frame. |
| * |
| * Returns true if an error was encountered and skb was freed. |
| */ |
| static bool igc_cleanup_headers(struct igc_ring *rx_ring, |
| union igc_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| if (unlikely((igc_test_staterr(rx_desc, |
| IGC_RXDEXT_ERR_FRAME_ERR_MASK)))) { |
| struct net_device *netdev = rx_ring->netdev; |
| |
| if (!(netdev->features & NETIF_F_RXALL)) { |
| dev_kfree_skb_any(skb); |
| return true; |
| } |
| } |
| |
| /* if eth_skb_pad returns an error the skb was freed */ |
| if (eth_skb_pad(skb)) |
| return true; |
| |
| return false; |
| } |
| |
| static void igc_put_rx_buffer(struct igc_ring *rx_ring, |
| struct igc_rx_buffer *rx_buffer) |
| { |
| if (igc_can_reuse_rx_page(rx_buffer)) { |
| /* hand second half of page back to the ring */ |
| igc_reuse_rx_page(rx_ring, rx_buffer); |
| } else { |
| /* We are not reusing the buffer so unmap it and free |
| * any references we are holding to it |
| */ |
| dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, |
| igc_rx_pg_size(rx_ring), DMA_FROM_DEVICE, |
| IGC_RX_DMA_ATTR); |
| __page_frag_cache_drain(rx_buffer->page, |
| rx_buffer->pagecnt_bias); |
| } |
| |
| /* clear contents of rx_buffer */ |
| rx_buffer->page = NULL; |
| } |
| |
| /** |
| * igc_alloc_rx_buffers - Replace used receive buffers; packet split |
| * @adapter: address of board private structure |
| */ |
| static void igc_alloc_rx_buffers(struct igc_ring *rx_ring, u16 cleaned_count) |
| { |
| union igc_adv_rx_desc *rx_desc; |
| u16 i = rx_ring->next_to_use; |
| struct igc_rx_buffer *bi; |
| u16 bufsz; |
| |
| /* nothing to do */ |
| if (!cleaned_count) |
| return; |
| |
| rx_desc = IGC_RX_DESC(rx_ring, i); |
| bi = &rx_ring->rx_buffer_info[i]; |
| i -= rx_ring->count; |
| |
| bufsz = igc_rx_bufsz(rx_ring); |
| |
| do { |
| if (!igc_alloc_mapped_page(rx_ring, bi)) |
| break; |
| |
| /* sync the buffer for use by the device */ |
| dma_sync_single_range_for_device(rx_ring->dev, bi->dma, |
| bi->page_offset, bufsz, |
| DMA_FROM_DEVICE); |
| |
| /* Refresh the desc even if buffer_addrs didn't change |
| * because each write-back erases this info. |
| */ |
| rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); |
| |
| rx_desc++; |
| bi++; |
| i++; |
| if (unlikely(!i)) { |
| rx_desc = IGC_RX_DESC(rx_ring, 0); |
| bi = rx_ring->rx_buffer_info; |
| i -= rx_ring->count; |
| } |
| |
| /* clear the length for the next_to_use descriptor */ |
| rx_desc->wb.upper.length = 0; |
| |
| cleaned_count--; |
| } while (cleaned_count); |
| |
| i += rx_ring->count; |
| |
| if (rx_ring->next_to_use != i) { |
| /* record the next descriptor to use */ |
| rx_ring->next_to_use = i; |
| |
| /* update next to alloc since we have filled the ring */ |
| rx_ring->next_to_alloc = i; |
| |
| /* Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| writel(i, rx_ring->tail); |
| } |
| } |
| |
| static int igc_clean_rx_irq(struct igc_q_vector *q_vector, const int budget) |
| { |
| unsigned int total_bytes = 0, total_packets = 0; |
| struct igc_ring *rx_ring = q_vector->rx.ring; |
| struct sk_buff *skb = rx_ring->skb; |
| u16 cleaned_count = igc_desc_unused(rx_ring); |
| |
| while (likely(total_packets < budget)) { |
| union igc_adv_rx_desc *rx_desc; |
| struct igc_rx_buffer *rx_buffer; |
| unsigned int size; |
| |
| /* return some buffers to hardware, one at a time is too slow */ |
| if (cleaned_count >= IGC_RX_BUFFER_WRITE) { |
| igc_alloc_rx_buffers(rx_ring, cleaned_count); |
| cleaned_count = 0; |
| } |
| |
| rx_desc = IGC_RX_DESC(rx_ring, rx_ring->next_to_clean); |
| size = le16_to_cpu(rx_desc->wb.upper.length); |
| if (!size) |
| break; |
| |
| /* This memory barrier is needed to keep us from reading |
| * any other fields out of the rx_desc until we know the |
| * descriptor has been written back |
| */ |
| dma_rmb(); |
| |
| rx_buffer = igc_get_rx_buffer(rx_ring, size); |
| |
| /* retrieve a buffer from the ring */ |
| if (skb) |
| igc_add_rx_frag(rx_ring, rx_buffer, skb, size); |
| else if (ring_uses_build_skb(rx_ring)) |
| skb = igc_build_skb(rx_ring, rx_buffer, rx_desc, size); |
| else |
| skb = igc_construct_skb(rx_ring, rx_buffer, |
| rx_desc, size); |
| |
| /* exit if we failed to retrieve a buffer */ |
| if (!skb) { |
| rx_ring->rx_stats.alloc_failed++; |
| rx_buffer->pagecnt_bias++; |
| break; |
| } |
| |
| igc_put_rx_buffer(rx_ring, rx_buffer); |
| cleaned_count++; |
| |
| /* fetch next buffer in frame if non-eop */ |
| if (igc_is_non_eop(rx_ring, rx_desc)) |
| continue; |
| |
| /* verify the packet layout is correct */ |
| if (igc_cleanup_headers(rx_ring, rx_desc, skb)) { |
| skb = NULL; |
| continue; |
| } |
| |
| /* probably a little skewed due to removing CRC */ |
| total_bytes += skb->len; |
| |
| /* populate checksum, timestamp, VLAN, and protocol */ |
| igc_process_skb_fields(rx_ring, rx_desc, skb); |
| |
| napi_gro_receive(&q_vector->napi, skb); |
| |
| /* reset skb pointer */ |
| skb = NULL; |
| |
| /* update budget accounting */ |
| total_packets++; |
| } |
| |
| /* place incomplete frames back on ring for completion */ |
| rx_ring->skb = skb; |
| |
| u64_stats_update_begin(&rx_ring->rx_syncp); |
| rx_ring->rx_stats.packets += total_packets; |
| rx_ring->rx_stats.bytes += total_bytes; |
| u64_stats_update_end(&rx_ring->rx_syncp); |
| q_vector->rx.total_packets += total_packets; |
| q_vector->rx.total_bytes += total_bytes; |
| |
| if (cleaned_count) |
| igc_alloc_rx_buffers(rx_ring, cleaned_count); |
| |
| return total_packets; |
| } |
| |
| static inline unsigned int igc_rx_offset(struct igc_ring *rx_ring) |
| { |
| return ring_uses_build_skb(rx_ring) ? IGC_SKB_PAD : 0; |
| } |
| |
| static bool igc_alloc_mapped_page(struct igc_ring *rx_ring, |
| struct igc_rx_buffer *bi) |
| { |
| struct page *page = bi->page; |
| dma_addr_t dma; |
| |
| /* since we are recycling buffers we should seldom need to alloc */ |
| if (likely(page)) |
| return true; |
| |
| /* alloc new page for storage */ |
| page = dev_alloc_pages(igc_rx_pg_order(rx_ring)); |
| if (unlikely(!page)) { |
| rx_ring->rx_stats.alloc_failed++; |
| return false; |
| } |
| |
| /* map page for use */ |
| dma = dma_map_page_attrs(rx_ring->dev, page, 0, |
| igc_rx_pg_size(rx_ring), |
| DMA_FROM_DEVICE, |
| IGC_RX_DMA_ATTR); |
| |
| /* if mapping failed free memory back to system since |
| * there isn't much point in holding memory we can't use |
| */ |
| if (dma_mapping_error(rx_ring->dev, dma)) { |
| __free_page(page); |
| |
| rx_ring->rx_stats.alloc_failed++; |
| return false; |
| } |
| |
| bi->dma = dma; |
| bi->page = page; |
| bi->page_offset = igc_rx_offset(rx_ring); |
| bi->pagecnt_bias = 1; |
| |
| return true; |
| } |
| |
| /** |
| * igc_clean_tx_irq - Reclaim resources after transmit completes |
| * @q_vector: pointer to q_vector containing needed info |
| * @napi_budget: Used to determine if we are in netpoll |
| * |
| * returns true if ring is completely cleaned |
| */ |
| static bool igc_clean_tx_irq(struct igc_q_vector *q_vector, int napi_budget) |
| { |
| struct igc_adapter *adapter = q_vector->adapter; |
| unsigned int total_bytes = 0, total_packets = 0; |
| unsigned int budget = q_vector->tx.work_limit; |
| struct igc_ring *tx_ring = q_vector->tx.ring; |
| unsigned int i = tx_ring->next_to_clean; |
| struct igc_tx_buffer *tx_buffer; |
| union igc_adv_tx_desc *tx_desc; |
| |
| if (test_bit(__IGC_DOWN, &adapter->state)) |
| return true; |
| |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| tx_desc = IGC_TX_DESC(tx_ring, i); |
| i -= tx_ring->count; |
| |
| do { |
| union igc_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; |
| |
| /* if next_to_watch is not set then there is no work pending */ |
| if (!eop_desc) |
| break; |
| |
| /* prevent any other reads prior to eop_desc */ |
| smp_rmb(); |
| |
| /* if DD is not set pending work has not been completed */ |
| if (!(eop_desc->wb.status & cpu_to_le32(IGC_TXD_STAT_DD))) |
| break; |
| |
| /* clear next_to_watch to prevent false hangs */ |
| tx_buffer->next_to_watch = NULL; |
| |
| /* update the statistics for this packet */ |
| total_bytes += tx_buffer->bytecount; |
| total_packets += tx_buffer->gso_segs; |
| |
| /* free the skb */ |
| napi_consume_skb(tx_buffer->skb, napi_budget); |
| |
| /* unmap skb header data */ |
| dma_unmap_single(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| |
| /* clear tx_buffer data */ |
| dma_unmap_len_set(tx_buffer, len, 0); |
| |
| /* clear last DMA location and unmap remaining buffers */ |
| while (tx_desc != eop_desc) { |
| tx_buffer++; |
| tx_desc++; |
| i++; |
| if (unlikely(!i)) { |
| i -= tx_ring->count; |
| tx_buffer = tx_ring->tx_buffer_info; |
| tx_desc = IGC_TX_DESC(tx_ring, 0); |
| } |
| |
| /* unmap any remaining paged data */ |
| if (dma_unmap_len(tx_buffer, len)) { |
| dma_unmap_page(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| dma_unmap_len_set(tx_buffer, len, 0); |
| } |
| } |
| |
| /* move us one more past the eop_desc for start of next pkt */ |
| tx_buffer++; |
| tx_desc++; |
| i++; |
| if (unlikely(!i)) { |
| i -= tx_ring->count; |
| tx_buffer = tx_ring->tx_buffer_info; |
| tx_desc = IGC_TX_DESC(tx_ring, 0); |
| } |
| |
| /* issue prefetch for next Tx descriptor */ |
| prefetch(tx_desc); |
| |
| /* update budget accounting */ |
| budget--; |
| } while (likely(budget)); |
| |
| netdev_tx_completed_queue(txring_txq(tx_ring), |
| total_packets, total_bytes); |
| |
| i += tx_ring->count; |
| tx_ring->next_to_clean = i; |
| u64_stats_update_begin(&tx_ring->tx_syncp); |
| tx_ring->tx_stats.bytes += total_bytes; |
| tx_ring->tx_stats.packets += total_packets; |
| u64_stats_update_end(&tx_ring->tx_syncp); |
| q_vector->tx.total_bytes += total_bytes; |
| q_vector->tx.total_packets += total_packets; |
| |
| if (test_bit(IGC_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) { |
| struct igc_hw *hw = &adapter->hw; |
| |
| /* Detect a transmit hang in hardware, this serializes the |
| * check with the clearing of time_stamp and movement of i |
| */ |
| clear_bit(IGC_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); |
| if (tx_buffer->next_to_watch && |
| time_after(jiffies, tx_buffer->time_stamp + |
| (adapter->tx_timeout_factor * HZ)) && |
| !(rd32(IGC_STATUS) & IGC_STATUS_TXOFF)) { |
| /* detected Tx unit hang */ |
| dev_err(tx_ring->dev, |
| "Detected Tx Unit Hang\n" |
| " Tx Queue <%d>\n" |
| " TDH <%x>\n" |
| " TDT <%x>\n" |
| " next_to_use <%x>\n" |
| " next_to_clean <%x>\n" |
| "buffer_info[next_to_clean]\n" |
| " time_stamp <%lx>\n" |
| " next_to_watch <%p>\n" |
| " jiffies <%lx>\n" |
| " desc.status <%x>\n", |
| tx_ring->queue_index, |
| rd32(IGC_TDH(tx_ring->reg_idx)), |
| readl(tx_ring->tail), |
| tx_ring->next_to_use, |
| tx_ring->next_to_clean, |
| tx_buffer->time_stamp, |
| tx_buffer->next_to_watch, |
| jiffies, |
| tx_buffer->next_to_watch->wb.status); |
| netif_stop_subqueue(tx_ring->netdev, |
| tx_ring->queue_index); |
| |
| /* we are about to reset, no point in enabling stuff */ |
| return true; |
| } |
| } |
| |
| #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) |
| if (unlikely(total_packets && |
| netif_carrier_ok(tx_ring->netdev) && |
| igc_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { |
| /* Make sure that anybody stopping the queue after this |
| * sees the new next_to_clean. |
| */ |
| smp_mb(); |
| if (__netif_subqueue_stopped(tx_ring->netdev, |
| tx_ring->queue_index) && |
| !(test_bit(__IGC_DOWN, &adapter->state))) { |
| netif_wake_subqueue(tx_ring->netdev, |
| tx_ring->queue_index); |
| |
| u64_stats_update_begin(&tx_ring->tx_syncp); |
| tx_ring->tx_stats.restart_queue++; |
| u64_stats_update_end(&tx_ring->tx_syncp); |
| } |
| } |
| |
| return !!budget; |
| } |
| |
| /** |
| * igc_up - Open the interface and prepare it to handle traffic |
| * @adapter: board private structure |
| */ |
| static void igc_up(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| int i = 0; |
| |
| /* hardware has been reset, we need to reload some things */ |
| igc_configure(adapter); |
| |
| clear_bit(__IGC_DOWN, &adapter->state); |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) |
| napi_enable(&adapter->q_vector[i]->napi); |
| |
| if (adapter->msix_entries) |
| igc_configure_msix(adapter); |
| else |
| igc_assign_vector(adapter->q_vector[0], 0); |
| |
| /* Clear any pending interrupts. */ |
| rd32(IGC_ICR); |
| igc_irq_enable(adapter); |
| |
| netif_tx_start_all_queues(adapter->netdev); |
| |
| /* start the watchdog. */ |
| hw->mac.get_link_status = 1; |
| schedule_work(&adapter->watchdog_task); |
| } |
| |
| /** |
| * igc_update_stats - Update the board statistics counters |
| * @adapter: board private structure |
| */ |
| static void igc_update_stats(struct igc_adapter *adapter) |
| { |
| } |
| |
| static void igc_nfc_filter_exit(struct igc_adapter *adapter) |
| { |
| } |
| |
| /** |
| * igc_down - Close the interface |
| * @adapter: board private structure |
| */ |
| static void igc_down(struct igc_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct igc_hw *hw = &adapter->hw; |
| u32 tctl, rctl; |
| int i = 0; |
| |
| set_bit(__IGC_DOWN, &adapter->state); |
| |
| /* disable receives in the hardware */ |
| rctl = rd32(IGC_RCTL); |
| wr32(IGC_RCTL, rctl & ~IGC_RCTL_EN); |
| /* flush and sleep below */ |
| |
| igc_nfc_filter_exit(adapter); |
| |
| /* set trans_start so we don't get spurious watchdogs during reset */ |
| netif_trans_update(netdev); |
| |
| netif_carrier_off(netdev); |
| netif_tx_stop_all_queues(netdev); |
| |
| /* disable transmits in the hardware */ |
| tctl = rd32(IGC_TCTL); |
| tctl &= ~IGC_TCTL_EN; |
| wr32(IGC_TCTL, tctl); |
| /* flush both disables and wait for them to finish */ |
| wrfl(); |
| usleep_range(10000, 20000); |
| |
| igc_irq_disable(adapter); |
| |
| adapter->flags &= ~IGC_FLAG_NEED_LINK_UPDATE; |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) { |
| if (adapter->q_vector[i]) { |
| napi_synchronize(&adapter->q_vector[i]->napi); |
| napi_disable(&adapter->q_vector[i]->napi); |
| } |
| } |
| |
| del_timer_sync(&adapter->watchdog_timer); |
| del_timer_sync(&adapter->phy_info_timer); |
| |
| /* record the stats before reset*/ |
| spin_lock(&adapter->stats64_lock); |
| igc_update_stats(adapter); |
| spin_unlock(&adapter->stats64_lock); |
| |
| adapter->link_speed = 0; |
| adapter->link_duplex = 0; |
| |
| if (!pci_channel_offline(adapter->pdev)) |
| igc_reset(adapter); |
| |
| /* clear VLAN promisc flag so VFTA will be updated if necessary */ |
| adapter->flags &= ~IGC_FLAG_VLAN_PROMISC; |
| |
| igc_clean_all_tx_rings(adapter); |
| igc_clean_all_rx_rings(adapter); |
| } |
| |
| static void igc_reinit_locked(struct igc_adapter *adapter) |
| { |
| WARN_ON(in_interrupt()); |
| while (test_and_set_bit(__IGC_RESETTING, &adapter->state)) |
| usleep_range(1000, 2000); |
| igc_down(adapter); |
| igc_up(adapter); |
| clear_bit(__IGC_RESETTING, &adapter->state); |
| } |
| |
| static void igc_reset_task(struct work_struct *work) |
| { |
| struct igc_adapter *adapter; |
| |
| adapter = container_of(work, struct igc_adapter, reset_task); |
| |
| netdev_err(adapter->netdev, "Reset adapter\n"); |
| igc_reinit_locked(adapter); |
| } |
| |
| /** |
| * igc_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int igc_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| struct igc_adapter *adapter = netdev_priv(netdev); |
| struct pci_dev *pdev = adapter->pdev; |
| |
| /* adjust max frame to be at least the size of a standard frame */ |
| if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) |
| max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; |
| |
| while (test_and_set_bit(__IGC_RESETTING, &adapter->state)) |
| usleep_range(1000, 2000); |
| |
| /* igc_down has a dependency on max_frame_size */ |
| adapter->max_frame_size = max_frame; |
| |
| if (netif_running(netdev)) |
| igc_down(adapter); |
| |
| dev_info(&pdev->dev, "changing MTU from %d to %d\n", |
| netdev->mtu, new_mtu); |
| netdev->mtu = new_mtu; |
| |
| if (netif_running(netdev)) |
| igc_up(adapter); |
| else |
| igc_reset(adapter); |
| |
| clear_bit(__IGC_RESETTING, &adapter->state); |
| |
| return 0; |
| } |
| |
| /** |
| * igc_get_stats - Get System Network Statistics |
| * @netdev: network interface device structure |
| * |
| * Returns the address of the device statistics structure. |
| * The statistics are updated here and also from the timer callback. |
| */ |
| static struct net_device_stats *igc_get_stats(struct net_device *netdev) |
| { |
| struct igc_adapter *adapter = netdev_priv(netdev); |
| |
| if (!test_bit(__IGC_RESETTING, &adapter->state)) |
| igc_update_stats(adapter); |
| |
| /* only return the current stats */ |
| return &netdev->stats; |
| } |
| |
| /** |
| * igc_configure - configure the hardware for RX and TX |
| * @adapter: private board structure |
| */ |
| static void igc_configure(struct igc_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int i = 0; |
| |
| igc_get_hw_control(adapter); |
| igc_set_rx_mode(netdev); |
| |
| igc_setup_tctl(adapter); |
| igc_setup_mrqc(adapter); |
| igc_setup_rctl(adapter); |
| |
| igc_configure_tx(adapter); |
| igc_configure_rx(adapter); |
| |
| igc_rx_fifo_flush_base(&adapter->hw); |
| |
| /* call igc_desc_unused which always leaves |
| * at least 1 descriptor unused to make sure |
| * next_to_use != next_to_clean |
| */ |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| struct igc_ring *ring = adapter->rx_ring[i]; |
| |
| igc_alloc_rx_buffers(ring, igc_desc_unused(ring)); |
| } |
| } |
| |
| /** |
| * igc_rar_set_index - Sync RAL[index] and RAH[index] registers with MAC table |
| * @adapter: Pointer to adapter structure |
| * @index: Index of the RAR entry which need to be synced with MAC table |
| */ |
| static void igc_rar_set_index(struct igc_adapter *adapter, u32 index) |
| { |
| u8 *addr = adapter->mac_table[index].addr; |
| struct igc_hw *hw = &adapter->hw; |
| u32 rar_low, rar_high; |
| |
| /* HW expects these to be in network order when they are plugged |
| * into the registers which are little endian. In order to guarantee |
| * that ordering we need to do an leXX_to_cpup here in order to be |
| * ready for the byteswap that occurs with writel |
| */ |
| rar_low = le32_to_cpup((__le32 *)(addr)); |
| rar_high = le16_to_cpup((__le16 *)(addr + 4)); |
| |
| /* Indicate to hardware the Address is Valid. */ |
| if (adapter->mac_table[index].state & IGC_MAC_STATE_IN_USE) { |
| if (is_valid_ether_addr(addr)) |
| rar_high |= IGC_RAH_AV; |
| |
| rar_high |= IGC_RAH_POOL_1 << |
| adapter->mac_table[index].queue; |
| } |
| |
| wr32(IGC_RAL(index), rar_low); |
| wrfl(); |
| wr32(IGC_RAH(index), rar_high); |
| wrfl(); |
| } |
| |
| /* Set default MAC address for the PF in the first RAR entry */ |
| static void igc_set_default_mac_filter(struct igc_adapter *adapter) |
| { |
| struct igc_mac_addr *mac_table = &adapter->mac_table[0]; |
| |
| ether_addr_copy(mac_table->addr, adapter->hw.mac.addr); |
| mac_table->state = IGC_MAC_STATE_DEFAULT | IGC_MAC_STATE_IN_USE; |
| |
| igc_rar_set_index(adapter, 0); |
| } |
| |
| /** |
| * igc_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_rx_mode entry point is called whenever the unicast or multicast |
| * address lists or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper unicast, multicast, |
| * promiscuous mode, and all-multi behavior. |
| */ |
| static void igc_set_rx_mode(struct net_device *netdev) |
| { |
| } |
| |
| /** |
| * igc_msix_other - msix other interrupt handler |
| * @irq: interrupt number |
| * @data: pointer to a q_vector |
| */ |
| static irqreturn_t igc_msix_other(int irq, void *data) |
| { |
| struct igc_adapter *adapter = data; |
| struct igc_hw *hw = &adapter->hw; |
| u32 icr = rd32(IGC_ICR); |
| |
| /* reading ICR causes bit 31 of EICR to be cleared */ |
| if (icr & IGC_ICR_DRSTA) |
| schedule_work(&adapter->reset_task); |
| |
| if (icr & IGC_ICR_DOUTSYNC) { |
| /* HW is reporting DMA is out of sync */ |
| adapter->stats.doosync++; |
| } |
| |
| if (icr & IGC_ICR_LSC) { |
| hw->mac.get_link_status = 1; |
| /* guard against interrupt when we're going down */ |
| if (!test_bit(__IGC_DOWN, &adapter->state)) |
| mod_timer(&adapter->watchdog_timer, jiffies + 1); |
| } |
| |
| wr32(IGC_EIMS, adapter->eims_other); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * igc_write_ivar - configure ivar for given MSI-X vector |
| * @hw: pointer to the HW structure |
| * @msix_vector: vector number we are allocating to a given ring |
| * @index: row index of IVAR register to write within IVAR table |
| * @offset: column offset of in IVAR, should be multiple of 8 |
| * |
| * The IVAR table consists of 2 columns, |
| * each containing an cause allocation for an Rx and Tx ring, and a |
| * variable number of rows depending on the number of queues supported. |
| */ |
| static void igc_write_ivar(struct igc_hw *hw, int msix_vector, |
| int index, int offset) |
| { |
| u32 ivar = array_rd32(IGC_IVAR0, index); |
| |
| /* clear any bits that are currently set */ |
| ivar &= ~((u32)0xFF << offset); |
| |
| /* write vector and valid bit */ |
| ivar |= (msix_vector | IGC_IVAR_VALID) << offset; |
| |
| array_wr32(IGC_IVAR0, index, ivar); |
| } |
| |
| static void igc_assign_vector(struct igc_q_vector *q_vector, int msix_vector) |
| { |
| struct igc_adapter *adapter = q_vector->adapter; |
| struct igc_hw *hw = &adapter->hw; |
| int rx_queue = IGC_N0_QUEUE; |
| int tx_queue = IGC_N0_QUEUE; |
| |
| if (q_vector->rx.ring) |
| rx_queue = q_vector->rx.ring->reg_idx; |
| if (q_vector->tx.ring) |
| tx_queue = q_vector->tx.ring->reg_idx; |
| |
| switch (hw->mac.type) { |
| case igc_i225: |
| if (rx_queue > IGC_N0_QUEUE) |
| igc_write_ivar(hw, msix_vector, |
| rx_queue >> 1, |
| (rx_queue & 0x1) << 4); |
| if (tx_queue > IGC_N0_QUEUE) |
| igc_write_ivar(hw, msix_vector, |
| tx_queue >> 1, |
| ((tx_queue & 0x1) << 4) + 8); |
| q_vector->eims_value = BIT(msix_vector); |
| break; |
| default: |
| WARN_ONCE(hw->mac.type != igc_i225, "Wrong MAC type\n"); |
| break; |
| } |
| |
| /* add q_vector eims value to global eims_enable_mask */ |
| adapter->eims_enable_mask |= q_vector->eims_value; |
| |
| /* configure q_vector to set itr on first interrupt */ |
| q_vector->set_itr = 1; |
| } |
| |
| /** |
| * igc_configure_msix - Configure MSI-X hardware |
| * @adapter: Pointer to adapter structure |
| * |
| * igc_configure_msix sets up the hardware to properly |
| * generate MSI-X interrupts. |
| */ |
| static void igc_configure_msix(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| int i, vector = 0; |
| u32 tmp; |
| |
| adapter->eims_enable_mask = 0; |
| |
| /* set vector for other causes, i.e. link changes */ |
| switch (hw->mac.type) { |
| case igc_i225: |
| /* Turn on MSI-X capability first, or our settings |
| * won't stick. And it will take days to debug. |
| */ |
| wr32(IGC_GPIE, IGC_GPIE_MSIX_MODE | |
| IGC_GPIE_PBA | IGC_GPIE_EIAME | |
| IGC_GPIE_NSICR); |
| |
| /* enable msix_other interrupt */ |
| adapter->eims_other = BIT(vector); |
| tmp = (vector++ | IGC_IVAR_VALID) << 8; |
| |
| wr32(IGC_IVAR_MISC, tmp); |
| break; |
| default: |
| /* do nothing, since nothing else supports MSI-X */ |
| break; |
| } /* switch (hw->mac.type) */ |
| |
| adapter->eims_enable_mask |= adapter->eims_other; |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) |
| igc_assign_vector(adapter->q_vector[i], vector++); |
| |
| wrfl(); |
| } |
| |
| static irqreturn_t igc_msix_ring(int irq, void *data) |
| { |
| struct igc_q_vector *q_vector = data; |
| |
| /* Write the ITR value calculated from the previous interrupt. */ |
| igc_write_itr(q_vector); |
| |
| napi_schedule(&q_vector->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * igc_request_msix - Initialize MSI-X interrupts |
| * @adapter: Pointer to adapter structure |
| * |
| * igc_request_msix allocates MSI-X vectors and requests interrupts from the |
| * kernel. |
| */ |
| static int igc_request_msix(struct igc_adapter *adapter) |
| { |
| int i = 0, err = 0, vector = 0, free_vector = 0; |
| struct net_device *netdev = adapter->netdev; |
| |
| err = request_irq(adapter->msix_entries[vector].vector, |
| &igc_msix_other, 0, netdev->name, adapter); |
| if (err) |
| goto err_out; |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) { |
| struct igc_q_vector *q_vector = adapter->q_vector[i]; |
| |
| vector++; |
| |
| q_vector->itr_register = adapter->io_addr + IGC_EITR(vector); |
| |
| if (q_vector->rx.ring && q_vector->tx.ring) |
| sprintf(q_vector->name, "%s-TxRx-%u", netdev->name, |
| q_vector->rx.ring->queue_index); |
| else if (q_vector->tx.ring) |
| sprintf(q_vector->name, "%s-tx-%u", netdev->name, |
| q_vector->tx.ring->queue_index); |
| else if (q_vector->rx.ring) |
| sprintf(q_vector->name, "%s-rx-%u", netdev->name, |
| q_vector->rx.ring->queue_index); |
| else |
| sprintf(q_vector->name, "%s-unused", netdev->name); |
| |
| err = request_irq(adapter->msix_entries[vector].vector, |
| igc_msix_ring, 0, q_vector->name, |
| q_vector); |
| if (err) |
| goto err_free; |
| } |
| |
| igc_configure_msix(adapter); |
| return 0; |
| |
| err_free: |
| /* free already assigned IRQs */ |
| free_irq(adapter->msix_entries[free_vector++].vector, adapter); |
| |
| vector--; |
| for (i = 0; i < vector; i++) { |
| free_irq(adapter->msix_entries[free_vector++].vector, |
| adapter->q_vector[i]); |
| } |
| err_out: |
| return err; |
| } |
| |
| /** |
| * igc_reset_q_vector - Reset config for interrupt vector |
| * @adapter: board private structure to initialize |
| * @v_idx: Index of vector to be reset |
| * |
| * If NAPI is enabled it will delete any references to the |
| * NAPI struct. This is preparation for igc_free_q_vector. |
| */ |
| static void igc_reset_q_vector(struct igc_adapter *adapter, int v_idx) |
| { |
| struct igc_q_vector *q_vector = adapter->q_vector[v_idx]; |
| |
| /* if we're coming from igc_set_interrupt_capability, the vectors are |
| * not yet allocated |
| */ |
| if (!q_vector) |
| return; |
| |
| if (q_vector->tx.ring) |
| adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; |
| |
| if (q_vector->rx.ring) |
| adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL; |
| |
| netif_napi_del(&q_vector->napi); |
| } |
| |
| static void igc_reset_interrupt_capability(struct igc_adapter *adapter) |
| { |
| int v_idx = adapter->num_q_vectors; |
| |
| if (adapter->msix_entries) { |
| pci_disable_msix(adapter->pdev); |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| } else if (adapter->flags & IGC_FLAG_HAS_MSI) { |
| pci_disable_msi(adapter->pdev); |
| } |
| |
| while (v_idx--) |
| igc_reset_q_vector(adapter, v_idx); |
| } |
| |
| /** |
| * igc_clear_interrupt_scheme - reset the device to a state of no interrupts |
| * @adapter: Pointer to adapter structure |
| * |
| * This function resets the device so that it has 0 rx queues, tx queues, and |
| * MSI-X interrupts allocated. |
| */ |
| static void igc_clear_interrupt_scheme(struct igc_adapter *adapter) |
| { |
| igc_free_q_vectors(adapter); |
| igc_reset_interrupt_capability(adapter); |
| } |
| |
| /** |
| * igc_free_q_vectors - Free memory allocated for interrupt vectors |
| * @adapter: board private structure to initialize |
| * |
| * This function frees the memory allocated to the q_vectors. In addition if |
| * NAPI is enabled it will delete any references to the NAPI struct prior |
| * to freeing the q_vector. |
| */ |
| static void igc_free_q_vectors(struct igc_adapter *adapter) |
| { |
| int v_idx = adapter->num_q_vectors; |
| |
| adapter->num_tx_queues = 0; |
| adapter->num_rx_queues = 0; |
| adapter->num_q_vectors = 0; |
| |
| while (v_idx--) { |
| igc_reset_q_vector(adapter, v_idx); |
| igc_free_q_vector(adapter, v_idx); |
| } |
| } |
| |
| /** |
| * igc_free_q_vector - Free memory allocated for specific interrupt vector |
| * @adapter: board private structure to initialize |
| * @v_idx: Index of vector to be freed |
| * |
| * This function frees the memory allocated to the q_vector. |
| */ |
| static void igc_free_q_vector(struct igc_adapter *adapter, int v_idx) |
| { |
| struct igc_q_vector *q_vector = adapter->q_vector[v_idx]; |
| |
| adapter->q_vector[v_idx] = NULL; |
| |
| /* igc_get_stats64() might access the rings on this vector, |
| * we must wait a grace period before freeing it. |
| */ |
| if (q_vector) |
| kfree_rcu(q_vector, rcu); |
| } |
| |
| /* Need to wait a few seconds after link up to get diagnostic information from |
| * the phy |
| */ |
| static void igc_update_phy_info(struct timer_list *t) |
| { |
| struct igc_adapter *adapter = from_timer(adapter, t, phy_info_timer); |
| |
| igc_get_phy_info(&adapter->hw); |
| } |
| |
| /** |
| * igc_has_link - check shared code for link and determine up/down |
| * @adapter: pointer to driver private info |
| */ |
| static bool igc_has_link(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| bool link_active = false; |
| |
| /* get_link_status is set on LSC (link status) interrupt or |
| * rx sequence error interrupt. get_link_status will stay |
| * false until the igc_check_for_link establishes link |
| * for copper adapters ONLY |
| */ |
| switch (hw->phy.media_type) { |
| case igc_media_type_copper: |
| if (!hw->mac.get_link_status) |
| return true; |
| hw->mac.ops.check_for_link(hw); |
| link_active = !hw->mac.get_link_status; |
| break; |
| default: |
| case igc_media_type_unknown: |
| break; |
| } |
| |
| if (hw->mac.type == igc_i225 && |
| hw->phy.id == I225_I_PHY_ID) { |
| if (!netif_carrier_ok(adapter->netdev)) { |
| adapter->flags &= ~IGC_FLAG_NEED_LINK_UPDATE; |
| } else if (!(adapter->flags & IGC_FLAG_NEED_LINK_UPDATE)) { |
| adapter->flags |= IGC_FLAG_NEED_LINK_UPDATE; |
| adapter->link_check_timeout = jiffies; |
| } |
| } |
| |
| return link_active; |
| } |
| |
| /** |
| * igc_watchdog - Timer Call-back |
| * @data: pointer to adapter cast into an unsigned long |
| */ |
| static void igc_watchdog(struct timer_list *t) |
| { |
| struct igc_adapter *adapter = from_timer(adapter, t, watchdog_timer); |
| /* Do the rest outside of interrupt context */ |
| schedule_work(&adapter->watchdog_task); |
| } |
| |
| static void igc_watchdog_task(struct work_struct *work) |
| { |
| struct igc_adapter *adapter = container_of(work, |
| struct igc_adapter, |
| watchdog_task); |
| struct net_device *netdev = adapter->netdev; |
| struct igc_hw *hw = &adapter->hw; |
| struct igc_phy_info *phy = &hw->phy; |
| u16 phy_data, retry_count = 20; |
| u32 connsw; |
| u32 link; |
| int i; |
| |
| link = igc_has_link(adapter); |
| |
| if (adapter->flags & IGC_FLAG_NEED_LINK_UPDATE) { |
| if (time_after(jiffies, (adapter->link_check_timeout + HZ))) |
| adapter->flags &= ~IGC_FLAG_NEED_LINK_UPDATE; |
| else |
| link = false; |
| } |
| |
| /* Force link down if we have fiber to swap to */ |
| if (adapter->flags & IGC_FLAG_MAS_ENABLE) { |
| if (hw->phy.media_type == igc_media_type_copper) { |
| connsw = rd32(IGC_CONNSW); |
| if (!(connsw & IGC_CONNSW_AUTOSENSE_EN)) |
| link = 0; |
| } |
| } |
| if (link) { |
| if (!netif_carrier_ok(netdev)) { |
| u32 ctrl; |
| |
| hw->mac.ops.get_speed_and_duplex(hw, |
| &adapter->link_speed, |
| &adapter->link_duplex); |
| |
| ctrl = rd32(IGC_CTRL); |
| /* Link status message must follow this format */ |
| netdev_info(netdev, |
| "igc: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n", |
| netdev->name, |
| adapter->link_speed, |
| adapter->link_duplex == FULL_DUPLEX ? |
| "Full" : "Half", |
| (ctrl & IGC_CTRL_TFCE) && |
| (ctrl & IGC_CTRL_RFCE) ? "RX/TX" : |
| (ctrl & IGC_CTRL_RFCE) ? "RX" : |
| (ctrl & IGC_CTRL_TFCE) ? "TX" : "None"); |
| |
| /* check if SmartSpeed worked */ |
| igc_check_downshift(hw); |
| if (phy->speed_downgraded) |
| netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n"); |
| |
| /* adjust timeout factor according to speed/duplex */ |
| adapter->tx_timeout_factor = 1; |
| switch (adapter->link_speed) { |
| case SPEED_10: |
| adapter->tx_timeout_factor = 14; |
| break; |
| case SPEED_100: |
| /* maybe add some timeout factor ? */ |
| break; |
| } |
| |
| if (adapter->link_speed != SPEED_1000) |
| goto no_wait; |
| |
| /* wait for Remote receiver status OK */ |
| retry_read_status: |
| if (!igc_read_phy_reg(hw, PHY_1000T_STATUS, |
| &phy_data)) { |
| if (!(phy_data & SR_1000T_REMOTE_RX_STATUS) && |
| retry_count) { |
| msleep(100); |
| retry_count--; |
| goto retry_read_status; |
| } else if (!retry_count) { |
| dev_err(&adapter->pdev->dev, "exceed max 2 second\n"); |
| } |
| } else { |
| dev_err(&adapter->pdev->dev, "read 1000Base-T Status Reg\n"); |
| } |
| no_wait: |
| netif_carrier_on(netdev); |
| |
| /* link state has changed, schedule phy info update */ |
| if (!test_bit(__IGC_DOWN, &adapter->state)) |
| mod_timer(&adapter->phy_info_timer, |
| round_jiffies(jiffies + 2 * HZ)); |
| } |
| } else { |
| if (netif_carrier_ok(netdev)) { |
| adapter->link_speed = 0; |
| adapter->link_duplex = 0; |
| |
| /* Links status message must follow this format */ |
| netdev_info(netdev, "igc: %s NIC Link is Down\n", |
| netdev->name); |
| netif_carrier_off(netdev); |
| |
| /* link state has changed, schedule phy info update */ |
| if (!test_bit(__IGC_DOWN, &adapter->state)) |
| mod_timer(&adapter->phy_info_timer, |
| round_jiffies(jiffies + 2 * HZ)); |
| |
| /* link is down, time to check for alternate media */ |
| if (adapter->flags & IGC_FLAG_MAS_ENABLE) { |
| if (adapter->flags & IGC_FLAG_MEDIA_RESET) { |
| schedule_work(&adapter->reset_task); |
| /* return immediately */ |
| return; |
| } |
| } |
| |
| /* also check for alternate media here */ |
| } else if (!netif_carrier_ok(netdev) && |
| (adapter->flags & IGC_FLAG_MAS_ENABLE)) { |
| if (adapter->flags & IGC_FLAG_MEDIA_RESET) { |
| schedule_work(&adapter->reset_task); |
| /* return immediately */ |
| return; |
| } |
| } |
| } |
| |
| spin_lock(&adapter->stats64_lock); |
| igc_update_stats(adapter); |
| spin_unlock(&adapter->stats64_lock); |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct igc_ring *tx_ring = adapter->tx_ring[i]; |
| |
| if (!netif_carrier_ok(netdev)) { |
| /* We've lost link, so the controller stops DMA, |
| * but we've got queued Tx work that's never going |
| * to get done, so reset controller to flush Tx. |
| * (Do the reset outside of interrupt context). |
| */ |
| if (igc_desc_unused(tx_ring) + 1 < tx_ring->count) { |
| adapter->tx_timeout_count++; |
| schedule_work(&adapter->reset_task); |
| /* return immediately since reset is imminent */ |
| return; |
| } |
| } |
| |
| /* Force detection of hung controller every watchdog period */ |
| set_bit(IGC_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); |
| } |
| |
| /* Cause software interrupt to ensure Rx ring is cleaned */ |
| if (adapter->flags & IGC_FLAG_HAS_MSIX) { |
| u32 eics = 0; |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) |
| eics |= adapter->q_vector[i]->eims_value; |
| wr32(IGC_EICS, eics); |
| } else { |
| wr32(IGC_ICS, IGC_ICS_RXDMT0); |
| } |
| |
| /* Reset the timer */ |
| if (!test_bit(__IGC_DOWN, &adapter->state)) { |
| if (adapter->flags & IGC_FLAG_NEED_LINK_UPDATE) |
| mod_timer(&adapter->watchdog_timer, |
| round_jiffies(jiffies + HZ)); |
| else |
| mod_timer(&adapter->watchdog_timer, |
| round_jiffies(jiffies + 2 * HZ)); |
| } |
| } |
| |
| /** |
| * igc_update_ring_itr - update the dynamic ITR value based on packet size |
| * @q_vector: pointer to q_vector |
| * |
| * Stores a new ITR value based on strictly on packet size. This |
| * algorithm is less sophisticated than that used in igc_update_itr, |
| * due to the difficulty of synchronizing statistics across multiple |
| * receive rings. The divisors and thresholds used by this function |
| * were determined based on theoretical maximum wire speed and testing |
| * data, in order to minimize response time while increasing bulk |
| * throughput. |
| * NOTE: This function is called only when operating in a multiqueue |
| * receive environment. |
| */ |
| static void igc_update_ring_itr(struct igc_q_vector *q_vector) |
| { |
| struct igc_adapter *adapter = q_vector->adapter; |
| int new_val = q_vector->itr_val; |
| int avg_wire_size = 0; |
| unsigned int packets; |
| |
| /* For non-gigabit speeds, just fix the interrupt rate at 4000 |
| * ints/sec - ITR timer value of 120 ticks. |
| */ |
| switch (adapter->link_speed) { |
| case SPEED_10: |
| case SPEED_100: |
| new_val = IGC_4K_ITR; |
| goto set_itr_val; |
| default: |
| break; |
| } |
| |
| packets = q_vector->rx.total_packets; |
| if (packets) |
| avg_wire_size = q_vector->rx.total_bytes / packets; |
| |
| packets = q_vector->tx.total_packets; |
| if (packets) |
| avg_wire_size = max_t(u32, avg_wire_size, |
| q_vector->tx.total_bytes / packets); |
| |
| /* if avg_wire_size isn't set no work was done */ |
| if (!avg_wire_size) |
| goto clear_counts; |
| |
| /* Add 24 bytes to size to account for CRC, preamble, and gap */ |
| avg_wire_size += 24; |
| |
| /* Don't starve jumbo frames */ |
| avg_wire_size = min(avg_wire_size, 3000); |
| |
| /* Give a little boost to mid-size frames */ |
| if (avg_wire_size > 300 && avg_wire_size < 1200) |
| new_val = avg_wire_size / 3; |
| else |
| new_val = avg_wire_size / 2; |
| |
| /* conservative mode (itr 3) eliminates the lowest_latency setting */ |
| if (new_val < IGC_20K_ITR && |
| ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || |
| (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) |
| new_val = IGC_20K_ITR; |
| |
| set_itr_val: |
| if (new_val != q_vector->itr_val) { |
| q_vector->itr_val = new_val; |
| q_vector->set_itr = 1; |
| } |
| clear_counts: |
| q_vector->rx.total_bytes = 0; |
| q_vector->rx.total_packets = 0; |
| q_vector->tx.total_bytes = 0; |
| q_vector->tx.total_packets = 0; |
| } |
| |
| /** |
| * igc_update_itr - update the dynamic ITR value based on statistics |
| * @q_vector: pointer to q_vector |
| * @ring_container: ring info to update the itr for |
| * |
| * Stores a new ITR value based on packets and byte |
| * counts during the last interrupt. The advantage of per interrupt |
| * computation is faster updates and more accurate ITR for the current |
| * traffic pattern. Constants in this function were computed |
| * based on theoretical maximum wire speed and thresholds were set based |
| * on testing data as well as attempting to minimize response time |
| * while increasing bulk throughput. |
| * NOTE: These calculations are only valid when operating in a single- |
| * queue environment. |
| */ |
| static void igc_update_itr(struct igc_q_vector *q_vector, |
| struct igc_ring_container *ring_container) |
| { |
| unsigned int packets = ring_container->total_packets; |
| unsigned int bytes = ring_container->total_bytes; |
| u8 itrval = ring_container->itr; |
| |
| /* no packets, exit with status unchanged */ |
| if (packets == 0) |
| return; |
| |
| switch (itrval) { |
| case lowest_latency: |
| /* handle TSO and jumbo frames */ |
| if (bytes / packets > 8000) |
| itrval = bulk_latency; |
| else if ((packets < 5) && (bytes > 512)) |
| itrval = low_latency; |
| break; |
| case low_latency: /* 50 usec aka 20000 ints/s */ |
| if (bytes > 10000) { |
| /* this if handles the TSO accounting */ |
| if (bytes / packets > 8000) |
| itrval = bulk_latency; |
| else if ((packets < 10) || ((bytes / packets) > 1200)) |
| itrval = bulk_latency; |
| else if ((packets > 35)) |
| itrval = lowest_latency; |
| } else if (bytes / packets > 2000) { |
| itrval = bulk_latency; |
| } else if (packets <= 2 && bytes < 512) { |
| itrval = lowest_latency; |
| } |
| break; |
| case bulk_latency: /* 250 usec aka 4000 ints/s */ |
| if (bytes > 25000) { |
| if (packets > 35) |
| itrval = low_latency; |
| } else if (bytes < 1500) { |
| itrval = low_latency; |
| } |
| break; |
| } |
| |
| /* clear work counters since we have the values we need */ |
| ring_container->total_bytes = 0; |
| ring_container->total_packets = 0; |
| |
| /* write updated itr to ring container */ |
| ring_container->itr = itrval; |
| } |
| |
| /** |
| * igc_intr_msi - Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| */ |
| static irqreturn_t igc_intr_msi(int irq, void *data) |
| { |
| struct igc_adapter *adapter = data; |
| struct igc_q_vector *q_vector = adapter->q_vector[0]; |
| struct igc_hw *hw = &adapter->hw; |
| /* read ICR disables interrupts using IAM */ |
| u32 icr = rd32(IGC_ICR); |
| |
| igc_write_itr(q_vector); |
| |
| if (icr & IGC_ICR_DRSTA) |
| schedule_work(&adapter->reset_task); |
| |
| if (icr & IGC_ICR_DOUTSYNC) { |
| /* HW is reporting DMA is out of sync */ |
| adapter->stats.doosync++; |
| } |
| |
| if (icr & (IGC_ICR_RXSEQ | IGC_ICR_LSC)) { |
| hw->mac.get_link_status = 1; |
| if (!test_bit(__IGC_DOWN, &adapter->state)) |
| mod_timer(&adapter->watchdog_timer, jiffies + 1); |
| } |
| |
| napi_schedule(&q_vector->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * igc_intr - Legacy Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| */ |
| static irqreturn_t igc_intr(int irq, void *data) |
| { |
| struct igc_adapter *adapter = data; |
| struct igc_q_vector *q_vector = adapter->q_vector[0]; |
| struct igc_hw *hw = &adapter->hw; |
| /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No |
| * need for the IMC write |
| */ |
| u32 icr = rd32(IGC_ICR); |
| |
| /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is |
| * not set, then the adapter didn't send an interrupt |
| */ |
| if (!(icr & IGC_ICR_INT_ASSERTED)) |
| return IRQ_NONE; |
| |
| igc_write_itr(q_vector); |
| |
| if (icr & IGC_ICR_DRSTA) |
| schedule_work(&adapter->reset_task); |
| |
| if (icr & IGC_ICR_DOUTSYNC) { |
| /* HW is reporting DMA is out of sync */ |
| adapter->stats.doosync++; |
| } |
| |
| if (icr & (IGC_ICR_RXSEQ | IGC_ICR_LSC)) { |
| hw->mac.get_link_status = 1; |
| /* guard against interrupt when we're going down */ |
| if (!test_bit(__IGC_DOWN, &adapter->state)) |
| mod_timer(&adapter->watchdog_timer, jiffies + 1); |
| } |
| |
| napi_schedule(&q_vector->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void igc_set_itr(struct igc_q_vector *q_vector) |
| { |
| struct igc_adapter *adapter = q_vector->adapter; |
| u32 new_itr = q_vector->itr_val; |
| u8 current_itr = 0; |
| |
| /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ |
| switch (adapter->link_speed) { |
| case SPEED_10: |
| case SPEED_100: |
| current_itr = 0; |
| new_itr = IGC_4K_ITR; |
| goto set_itr_now; |
| default: |
| break; |
| } |
| |
| igc_update_itr(q_vector, &q_vector->tx); |
| igc_update_itr(q_vector, &q_vector->rx); |
| |
| current_itr = max(q_vector->rx.itr, q_vector->tx.itr); |
| |
| /* conservative mode (itr 3) eliminates the lowest_latency setting */ |
| if (current_itr == lowest_latency && |
| ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || |
| (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) |
| current_itr = low_latency; |
| |
| switch (current_itr) { |
| /* counts and packets in update_itr are dependent on these numbers */ |
| case lowest_latency: |
| new_itr = IGC_70K_ITR; /* 70,000 ints/sec */ |
| break; |
| case low_latency: |
| new_itr = IGC_20K_ITR; /* 20,000 ints/sec */ |
| break; |
| case bulk_latency: |
| new_itr = IGC_4K_ITR; /* 4,000 ints/sec */ |
| break; |
| default: |
| break; |
| } |
| |
| set_itr_now: |
| if (new_itr != q_vector->itr_val) { |
| /* this attempts to bias the interrupt rate towards Bulk |
| * by adding intermediate steps when interrupt rate is |
| * increasing |
| */ |
| new_itr = new_itr > q_vector->itr_val ? |
| max((new_itr * q_vector->itr_val) / |
| (new_itr + (q_vector->itr_val >> 2)), |
| new_itr) : new_itr; |
| /* Don't write the value here; it resets the adapter's |
| * internal timer, and causes us to delay far longer than |
| * we should between interrupts. Instead, we write the ITR |
| * value at the beginning of the next interrupt so the timing |
| * ends up being correct. |
| */ |
| q_vector->itr_val = new_itr; |
| q_vector->set_itr = 1; |
| } |
| } |
| |
| static void igc_ring_irq_enable(struct igc_q_vector *q_vector) |
| { |
| struct igc_adapter *adapter = q_vector->adapter; |
| struct igc_hw *hw = &adapter->hw; |
| |
| if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) || |
| (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) { |
| if (adapter->num_q_vectors == 1) |
| igc_set_itr(q_vector); |
| else |
| igc_update_ring_itr(q_vector); |
| } |
| |
| if (!test_bit(__IGC_DOWN, &adapter->state)) { |
| if (adapter->msix_entries) |
| wr32(IGC_EIMS, q_vector->eims_value); |
| else |
| igc_irq_enable(adapter); |
| } |
| } |
| |
| /** |
| * igc_poll - NAPI Rx polling callback |
| * @napi: napi polling structure |
| * @budget: count of how many packets we should handle |
| */ |
| static int igc_poll(struct napi_struct *napi, int budget) |
| { |
| struct igc_q_vector *q_vector = container_of(napi, |
| struct igc_q_vector, |
| napi); |
| bool clean_complete = true; |
| int work_done = 0; |
| |
| if (q_vector->tx.ring) |
| clean_complete = igc_clean_tx_irq(q_vector, budget); |
| |
| if (q_vector->rx.ring) { |
| int cleaned = igc_clean_rx_irq(q_vector, budget); |
| |
| work_done += cleaned; |
| if (cleaned >= budget) |
| clean_complete = false; |
| } |
| |
| /* If all work not completed, return budget and keep polling */ |
| if (!clean_complete) |
| return budget; |
| |
| /* Exit the polling mode, but don't re-enable interrupts if stack might |
| * poll us due to busy-polling |
| */ |
| if (likely(napi_complete_done(napi, work_done))) |
| igc_ring_irq_enable(q_vector); |
| |
| return min(work_done, budget - 1); |
| } |
| |
| /** |
| * igc_set_interrupt_capability - set MSI or MSI-X if supported |
| * @adapter: Pointer to adapter structure |
| * |
| * Attempt to configure interrupts using the best available |
| * capabilities of the hardware and kernel. |
| */ |
| static void igc_set_interrupt_capability(struct igc_adapter *adapter, |
| bool msix) |
| { |
| int numvecs, i; |
| int err; |
| |
| if (!msix) |
| goto msi_only; |
| adapter->flags |= IGC_FLAG_HAS_MSIX; |
| |
| /* Number of supported queues. */ |
| adapter->num_rx_queues = adapter->rss_queues; |
| |
| adapter->num_tx_queues = adapter->rss_queues; |
| |
| /* start with one vector for every Rx queue */ |
| numvecs = adapter->num_rx_queues; |
| |
| /* if Tx handler is separate add 1 for every Tx queue */ |
| if (!(adapter->flags & IGC_FLAG_QUEUE_PAIRS)) |
| numvecs += adapter->num_tx_queues; |
| |
| /* store the number of vectors reserved for queues */ |
| adapter->num_q_vectors = numvecs; |
| |
| /* add 1 vector for link status interrupts */ |
| numvecs++; |
| |
| adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry), |
| GFP_KERNEL); |
| |
| if (!adapter->msix_entries) |
| return; |
| |
| /* populate entry values */ |
| for (i = 0; i < numvecs; i++) |
| adapter->msix_entries[i].entry = i; |
| |
| err = pci_enable_msix_range(adapter->pdev, |
| adapter->msix_entries, |
| numvecs, |
| numvecs); |
| if (err > 0) |
| return; |
| |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| |
| igc_reset_interrupt_capability(adapter); |
| |
| msi_only: |
| adapter->flags &= ~IGC_FLAG_HAS_MSIX; |
| |
| adapter->rss_queues = 1; |
| adapter->flags |= IGC_FLAG_QUEUE_PAIRS; |
| adapter->num_rx_queues = 1; |
| adapter->num_tx_queues = 1; |
| adapter->num_q_vectors = 1; |
| if (!pci_enable_msi(adapter->pdev)) |
| adapter->flags |= IGC_FLAG_HAS_MSI; |
| } |
| |
| static void igc_add_ring(struct igc_ring *ring, |
| struct igc_ring_container *head) |
| { |
| head->ring = ring; |
| head->count++; |
| } |
| |
| /** |
| * igc_alloc_q_vector - Allocate memory for a single interrupt vector |
| * @adapter: board private structure to initialize |
| * @v_count: q_vectors allocated on adapter, used for ring interleaving |
| * @v_idx: index of vector in adapter struct |
| * @txr_count: total number of Tx rings to allocate |
| * @txr_idx: index of first Tx ring to allocate |
| * @rxr_count: total number of Rx rings to allocate |
| * @rxr_idx: index of first Rx ring to allocate |
| * |
| * We allocate one q_vector. If allocation fails we return -ENOMEM. |
| */ |
| static int igc_alloc_q_vector(struct igc_adapter *adapter, |
| unsigned int v_count, unsigned int v_idx, |
| unsigned int txr_count, unsigned int txr_idx, |
| unsigned int rxr_count, unsigned int rxr_idx) |
| { |
| struct igc_q_vector *q_vector; |
| struct igc_ring *ring; |
| int ring_count, size; |
| |
| /* igc only supports 1 Tx and/or 1 Rx queue per vector */ |
| if (txr_count > 1 || rxr_count > 1) |
| return -ENOMEM; |
| |
| ring_count = txr_count + rxr_count; |
| size = sizeof(struct igc_q_vector) + |
| (sizeof(struct igc_ring) * ring_count); |
| |
| /* allocate q_vector and rings */ |
| q_vector = adapter->q_vector[v_idx]; |
| if (!q_vector) |
| q_vector = kzalloc(size, GFP_KERNEL); |
| else |
| memset(q_vector, 0, size); |
| if (!q_vector) |
| return -ENOMEM; |
| |
| /* initialize NAPI */ |
| netif_napi_add(adapter->netdev, &q_vector->napi, |
| igc_poll, 64); |
| |
| /* tie q_vector and adapter together */ |
| adapter->q_vector[v_idx] = q_vector; |
| q_vector->adapter = adapter; |
| |
| /* initialize work limits */ |
| q_vector->tx.work_limit = adapter->tx_work_limit; |
| |
| /* initialize ITR configuration */ |
| q_vector->itr_register = adapter->io_addr + IGC_EITR(0); |
| q_vector->itr_val = IGC_START_ITR; |
| |
| /* initialize pointer to rings */ |
| ring = q_vector->ring; |
| |
| /* initialize ITR */ |
| if (rxr_count) { |
| /* rx or rx/tx vector */ |
| if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3) |
| q_vector->itr_val = adapter->rx_itr_setting; |
| } else { |
| /* tx only vector */ |
| if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3) |
| q_vector->itr_val = adapter->tx_itr_setting; |
| } |
| |
| if (txr_count) { |
| /* assign generic ring traits */ |
| ring->dev = &adapter->pdev->dev; |
| ring->netdev = adapter->netdev; |
| |
| /* configure backlink on ring */ |
| ring->q_vector = q_vector; |
| |
| /* update q_vector Tx values */ |
| igc_add_ring(ring, &q_vector->tx); |
| |
| /* apply Tx specific ring traits */ |
| ring->count = adapter->tx_ring_count; |
| ring->queue_index = txr_idx; |
| |
| /* assign ring to adapter */ |
| adapter->tx_ring[txr_idx] = ring; |
| |
| /* push pointer to next ring */ |
| ring++; |
| } |
| |
| if (rxr_count) { |
| /* assign generic ring traits */ |
| ring->dev = &adapter->pdev->dev; |
| ring->netdev = adapter->netdev; |
| |
| /* configure backlink on ring */ |
| ring->q_vector = q_vector; |
| |
| /* update q_vector Rx values */ |
| igc_add_ring(ring, &q_vector->rx); |
| |
| /* apply Rx specific ring traits */ |
| ring->count = adapter->rx_ring_count; |
| ring->queue_index = rxr_idx; |
| |
| /* assign ring to adapter */ |
| adapter->rx_ring[rxr_idx] = ring; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * igc_alloc_q_vectors - Allocate memory for interrupt vectors |
| * @adapter: board private structure to initialize |
| * |
| * We allocate one q_vector per queue interrupt. If allocation fails we |
| * return -ENOMEM. |
| */ |
| static int igc_alloc_q_vectors(struct igc_adapter *adapter) |
| { |
| int rxr_remaining = adapter->num_rx_queues; |
| int txr_remaining = adapter->num_tx_queues; |
| int rxr_idx = 0, txr_idx = 0, v_idx = 0; |
| int q_vectors = adapter->num_q_vectors; |
| int err; |
| |
| if (q_vectors >= (rxr_remaining + txr_remaining)) { |
| for (; rxr_remaining; v_idx++) { |
| err = igc_alloc_q_vector(adapter, q_vectors, v_idx, |
| 0, 0, 1, rxr_idx); |
| |
| if (err) |
| goto err_out; |
| |
| /* update counts and index */ |
| rxr_remaining--; |
| rxr_idx++; |
| } |
| } |
| |
| for (; v_idx < q_vectors; v_idx++) { |
| int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); |
| int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); |
| |
| err = igc_alloc_q_vector(adapter, q_vectors, v_idx, |
| tqpv, txr_idx, rqpv, rxr_idx); |
| |
| if (err) |
| goto err_out; |
| |
| /* update counts and index */ |
| rxr_remaining -= rqpv; |
| txr_remaining -= tqpv; |
| rxr_idx++; |
| txr_idx++; |
| } |
| |
| return 0; |
| |
| err_out: |
| adapter->num_tx_queues = 0; |
| adapter->num_rx_queues = 0; |
| adapter->num_q_vectors = 0; |
| |
| while (v_idx--) |
| igc_free_q_vector(adapter, v_idx); |
| |
| return -ENOMEM; |
| } |
| |
| /** |
| * igc_cache_ring_register - Descriptor ring to register mapping |
| * @adapter: board private structure to initialize |
| * |
| * Once we know the feature-set enabled for the device, we'll cache |
| * the register offset the descriptor ring is assigned to. |
| */ |
| static void igc_cache_ring_register(struct igc_adapter *adapter) |
| { |
| int i = 0, j = 0; |
| |
| switch (adapter->hw.mac.type) { |
| case igc_i225: |
| /* Fall through */ |
| default: |
| for (; i < adapter->num_rx_queues; i++) |
| adapter->rx_ring[i]->reg_idx = i; |
| for (; j < adapter->num_tx_queues; j++) |
| adapter->tx_ring[j]->reg_idx = j; |
| break; |
| } |
| } |
| |
| /** |
| * igc_init_interrupt_scheme - initialize interrupts, allocate queues/vectors |
| * @adapter: Pointer to adapter structure |
| * |
| * This function initializes the interrupts and allocates all of the queues. |
| */ |
| static int igc_init_interrupt_scheme(struct igc_adapter *adapter, bool msix) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int err = 0; |
| |
| igc_set_interrupt_capability(adapter, msix); |
| |
| err = igc_alloc_q_vectors(adapter); |
| if (err) { |
| dev_err(&pdev->dev, "Unable to allocate memory for vectors\n"); |
| goto err_alloc_q_vectors; |
| } |
| |
| igc_cache_ring_register(adapter); |
| |
| return 0; |
| |
| err_alloc_q_vectors: |
| igc_reset_interrupt_capability(adapter); |
| return err; |
| } |
| |
| static void igc_free_irq(struct igc_adapter *adapter) |
| { |
| if (adapter->msix_entries) { |
| int vector = 0, i; |
| |
| free_irq(adapter->msix_entries[vector++].vector, adapter); |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) |
| free_irq(adapter->msix_entries[vector++].vector, |
| adapter->q_vector[i]); |
| } else { |
| free_irq(adapter->pdev->irq, adapter); |
| } |
| } |
| |
| /** |
| * igc_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| */ |
| static void igc_irq_disable(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| |
| if (adapter->msix_entries) { |
| u32 regval = rd32(IGC_EIAM); |
| |
| wr32(IGC_EIAM, regval & ~adapter->eims_enable_mask); |
| wr32(IGC_EIMC, adapter->eims_enable_mask); |
| regval = rd32(IGC_EIAC); |
| wr32(IGC_EIAC, regval & ~adapter->eims_enable_mask); |
| } |
| |
| wr32(IGC_IAM, 0); |
| wr32(IGC_IMC, ~0); |
| wrfl(); |
| |
| if (adapter->msix_entries) { |
| int vector = 0, i; |
| |
| synchronize_irq(adapter->msix_entries[vector++].vector); |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) |
| synchronize_irq(adapter->msix_entries[vector++].vector); |
| } else { |
| synchronize_irq(adapter->pdev->irq); |
| } |
| } |
| |
| /** |
| * igc_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| */ |
| static void igc_irq_enable(struct igc_adapter *adapter) |
| { |
| struct igc_hw *hw = &adapter->hw; |
| |
| if (adapter->msix_entries) { |
| u32 ims = IGC_IMS_LSC | IGC_IMS_DOUTSYNC | IGC_IMS_DRSTA; |
| u32 regval = rd32(IGC_EIAC); |
| |
| wr32(IGC_EIAC, regval | adapter->eims_enable_mask); |
| regval = rd32(IGC_EIAM); |
| wr32(IGC_EIAM, regval | adapter->eims_enable_mask); |
| wr32(IGC_EIMS, adapter->eims_enable_mask); |
| wr32(IGC_IMS, ims); |
| } else { |
| wr32(IGC_IMS, IMS_ENABLE_MASK | IGC_IMS_DRSTA); |
| wr32(IGC_IAM, IMS_ENABLE_MASK | IGC_IMS_DRSTA); |
| } |
| } |
| |
| /** |
| * igc_request_irq - initialize interrupts |
| * @adapter: Pointer to adapter structure |
| * |
| * Attempts to configure interrupts using the best available |
| * capabilities of the hardware and kernel. |
| */ |
| static int igc_request_irq(struct igc_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct pci_dev *pdev = adapter->pdev; |
| int err = 0; |
| |
| if (adapter->flags & IGC_FLAG_HAS_MSIX) { |
| err = igc_request_msix(adapter); |
| if (!err) |
| goto request_done; |
| /* fall back to MSI */ |
| igc_free_all_tx_resources(adapter); |
| igc_free_all_rx_resources(adapter); |
| |
| igc_clear_interrupt_scheme(adapter); |
| err = igc_init_interrupt_scheme(adapter, false); |
| if (err) |
| goto request_done; |
| igc_setup_all_tx_resources(adapter); |
| igc_setup_all_rx_resources(adapter); |
| igc_configure(adapter); |
| } |
| |
| igc_assign_vector(adapter->q_vector[0], 0); |
| |
| if (adapter->flags & IGC_FLAG_HAS_MSI) { |
| err = request_irq(pdev->irq, &igc_intr_msi, 0, |
| netdev->name, adapter); |
| if (!err) |
| goto request_done; |
| |
| /* fall back to legacy interrupts */ |
| igc_reset_interrupt_capability(adapter); |
| adapter->flags &= ~IGC_FLAG_HAS_MSI; |
| } |
| |
| err = request_irq(pdev->irq, &igc_intr, IRQF_SHARED, |
| netdev->name, adapter); |
| |
| if (err) |
| dev_err(&pdev->dev, "Error %d getting interrupt\n", |
| err); |
| |
| request_done: |
| return err; |
| } |
| |
| static void igc_write_itr(struct igc_q_vector *q_vector) |
| { |
| u32 itr_val = q_vector->itr_val & IGC_QVECTOR_MASK; |
| |
| if (!q_vector->set_itr) |
| return; |
| |
| if (!itr_val) |
| itr_val = IGC_ITR_VAL_MASK; |
| |
| itr_val |= IGC_EITR_CNT_IGNR; |
| |
| writel(itr_val, q_vector->itr_register); |
| q_vector->set_itr = 0; |
| } |
| |
| /** |
| * igc_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| */ |
| static int __igc_open(struct net_device *netdev, bool resuming) |
| { |
| struct igc_adapter *adapter = netdev_priv(netdev); |
| struct igc_hw *hw = &adapter->hw; |
| int err = 0; |
| int i = 0; |
| |
| /* disallow open during test */ |
| |
| if (test_bit(__IGC_TESTING, &adapter->state)) { |
| WARN_ON(resuming); |
| return -EBUSY; |
| } |
| |
| netif_carrier_off(netdev); |
| |
| /* allocate transmit descriptors */ |
| err = igc_setup_all_tx_resources(adapter); |
| if (err) |
| goto err_setup_tx; |
| |
| /* allocate receive descriptors */ |
| err = igc_setup_all_rx_resources(adapter); |
| if (err) |
| goto err_setup_rx; |
| |
| igc_power_up_link(adapter); |
| |
| igc_configure(adapter); |
| |
| err = igc_request_irq(adapter); |
| if (err) |
| goto err_req_irq; |
| |
| /* Notify the stack of the actual queue counts. */ |
| err = netif_set_real_num_tx_queues(netdev, adapter->num_tx_queues); |
| if (err) |
| goto err_set_queues; |
| |
| err = netif_set_real_num_rx_queues(netdev, adapter->num_rx_queues); |
| if (err) |
| goto err_set_queues; |
| |
| clear_bit(__IGC_DOWN, &adapter->state); |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) |
| napi_enable(&adapter->q_vector[i]->napi); |
| |
| /* Clear any pending interrupts. */ |
| rd32(IGC_ICR); |
| igc_irq_enable(adapter); |
| |
| netif_tx_start_all_queues(netdev); |
| |
| /* start the watchdog. */ |
| hw->mac.get_link_status = 1; |
| schedule_work(&adapter->watchdog_task); |
| |
| return IGC_SUCCESS; |
| |
| err_set_queues: |
| igc_free_irq(adapter); |
| err_req_irq: |
| igc_release_hw_control(adapter); |
| igc_power_down_link(adapter); |
| igc_free_all_rx_resources(adapter); |
| err_setup_rx: |
| igc_free_all_tx_resources(adapter); |
| err_setup_tx: |
| igc_reset(adapter); |
| |
| return err; |
| } |
| |
| static int igc_open(struct net_device *netdev) |
| { |
| return __igc_open(netdev, false); |
| } |
| |
| /** |
| * igc_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the driver's control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| */ |
| static int __igc_close(struct net_device *netdev, bool suspending) |
| { |
| struct igc_adapter *adapter = netdev_priv(netdev); |
| |
| WARN_ON(test_bit(__IGC_RESETTING, &adapter->state)); |
| |
| igc_down(adapter); |
| |
| igc_release_hw_control(adapter); |
| |
| igc_free_irq(adapter); |
| |
| igc_free_all_tx_resources(adapter); |
| igc_free_all_rx_resources(adapter); |
| |
| return 0; |
| } |
| |
| static int igc_close(struct net_device *netdev) |
| { |
| if (netif_device_present(netdev) || netdev->dismantle) |
| return __igc_close(netdev, false); |
| return 0; |
| } |
| |
| static const struct net_device_ops igc_netdev_ops = { |
| .ndo_open = igc_open, |
| .ndo_stop = igc_close, |
| .ndo_start_xmit = igc_xmit_frame, |
| .ndo_set_mac_address = igc_set_mac, |
| .ndo_change_mtu = igc_change_mtu, |
| .ndo_get_stats = igc_get_stats, |
| }; |
| |
| /* PCIe configuration access */ |
| void igc_read_pci_cfg(struct igc_hw *hw, u32 reg, u16 *value) |
| { |
| struct igc_adapter *adapter = hw->back; |
| |
| pci_read_config_word(adapter->pdev, reg, value); |
| } |
| |
| void igc_write_pci_cfg(struct igc_hw *hw, u32 reg, u16 *value) |
| { |
| struct igc_adapter *adapter = hw->back; |
| |
| pci_write_config_word(adapter->pdev, reg, *value); |
| } |
| |
| s32 igc_read_pcie_cap_reg(struct igc_hw *hw, u32 reg, u16 *value) |
| { |
| struct igc_adapter *adapter = hw->back; |
| u16 cap_offset; |
| |
| cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); |
| if (!cap_offset) |
| return -IGC_ERR_CONFIG; |
| |
| pci_read_config_word(adapter->pdev, cap_offset + reg, value); |
| |
| return IGC_SUCCESS; |
| } |
| |
| s32 igc_write_pcie_cap_reg(struct igc_hw *hw, u32 reg, u16 *value) |
| { |
| struct igc_adapter *adapter = hw->back; |
| u16 cap_offset; |
| |
| cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); |
| if (!cap_offset) |
| return -IGC_ERR_CONFIG; |
| |
| pci_write_config_word(adapter->pdev, cap_offset + reg, *value); |
| |
| return IGC_SUCCESS; |
| } |
| |
| u32 igc_rd32(struct igc_hw *hw, u32 reg) |
| { |
| struct igc_adapter *igc = container_of(hw, struct igc_adapter, hw); |
| u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr); |
| u32 value = 0; |
| |
| if (IGC_REMOVED(hw_addr)) |
| return ~value; |
| |
| value = readl(&hw_addr[reg]); |
| |
| /* reads should not return all F's */ |
| if (!(~value) && (!reg || !(~readl(hw_addr)))) { |
| struct net_device *netdev = igc->netdev; |
| |
| hw->hw_addr = NULL; |
| netif_device_detach(netdev); |
| netdev_err(netdev, "PCIe link lost, device now detached\n"); |
| } |
| |
| return value; |
| } |
| |
| /** |
| * igc_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in igc_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * igc_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring the adapter private structure, |
| * and a hardware reset occur. |
| */ |
| static int igc_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct igc_adapter *adapter; |
| struct net_device *netdev; |
| struct igc_hw *hw; |
| const struct igc_info *ei = igc_info_tbl[ent->driver_data]; |
| int err; |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) |
| return err; |
| |
| err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); |
| if (!err) { |
| err = dma_set_coherent_mask(&pdev->dev, |
| DMA_BIT_MASK(64)); |
| } else { |
| err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) { |
| err = dma_set_coherent_mask(&pdev->dev, |
| DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "igc: Wrong DMA config\n"); |
| goto err_dma; |
| } |
| } |
| } |
| |
| err = pci_request_selected_regions(pdev, |
| pci_select_bars(pdev, |
| IORESOURCE_MEM), |
| igc_driver_name); |
| if (err) |
| goto err_pci_reg; |
| |
| pci_enable_pcie_error_reporting(pdev); |
| |
| pci_set_master(pdev); |
| |
| err = -ENOMEM; |
| netdev = alloc_etherdev_mq(sizeof(struct igc_adapter), |
| IGC_MAX_TX_QUEUES); |
| |
| if (!netdev) |
| goto err_alloc_etherdev; |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| pci_set_drvdata(pdev, netdev); |
| adapter = netdev_priv(netdev); |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| hw = &adapter->hw; |
| hw->back = adapter; |
| adapter->port_num = hw->bus.func; |
| adapter->msg_enable = GENMASK(debug - 1, 0); |
| |
| err = pci_save_state(pdev); |
| if (err) |
| goto err_ioremap; |
| |
| err = -EIO; |
| adapter->io_addr = ioremap(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| if (!adapter->io_addr) |
| goto err_ioremap; |
| |
| /* hw->hw_addr can be zeroed, so use adapter->io_addr for unmap */ |
| hw->hw_addr = adapter->io_addr; |
| |
| netdev->netdev_ops = &igc_netdev_ops; |
| |
| netdev->watchdog_timeo = 5 * HZ; |
| |
| netdev->mem_start = pci_resource_start(pdev, 0); |
| netdev->mem_end = pci_resource_end(pdev, 0); |
| |
| /* PCI config space info */ |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| hw->revision_id = pdev->revision; |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_device_id = pdev->subsystem_device; |
| |
| /* Copy the default MAC and PHY function pointers */ |
| memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); |
| memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); |
| |
| /* Initialize skew-specific constants */ |
| err = ei->get_invariants(hw); |
| if (err) |
| goto err_sw_init; |
| |
| /* setup the private structure */ |
| err = igc_sw_init(adapter); |
| if (err) |
| goto err_sw_init; |
| |
| /* MTU range: 68 - 9216 */ |
| netdev->min_mtu = ETH_MIN_MTU; |
| netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE; |
| |
| /* before reading the NVM, reset the controller to put the device in a |
| * known good starting state |
| */ |
| hw->mac.ops.reset_hw(hw); |
| |
| if (eth_platform_get_mac_address(&pdev->dev, hw->mac.addr)) { |
| /* copy the MAC address out of the NVM */ |
| if (hw->mac.ops.read_mac_addr(hw)) |
| dev_err(&pdev->dev, "NVM Read Error\n"); |
| } |
| |
| memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); |
| |
| if (!is_valid_ether_addr(netdev->dev_addr)) { |
| dev_err(&pdev->dev, "Invalid MAC Address\n"); |
| err = -EIO; |
| goto err_eeprom; |
| } |
| |
| /* configure RXPBSIZE and TXPBSIZE */ |
| wr32(IGC_RXPBS, I225_RXPBSIZE_DEFAULT); |
| wr32(IGC_TXPBS, I225_TXPBSIZE_DEFAULT); |
| |
| timer_setup(&adapter->watchdog_timer, igc_watchdog, 0); |
| timer_setup(&adapter->phy_info_timer, igc_update_phy_info, 0); |
| |
| INIT_WORK(&adapter->reset_task, igc_reset_task); |
| INIT_WORK(&adapter->watchdog_task, igc_watchdog_task); |
| |
| /* Initialize link properties that are user-changeable */ |
| adapter->fc_autoneg = true; |
| hw->mac.autoneg = true; |
| hw->phy.autoneg_advertised = 0xaf; |
| |
| hw->fc.requested_mode = igc_fc_default; |
| hw->fc.current_mode = igc_fc_default; |
| |
| /* reset the hardware with the new settings */ |
| igc_reset(adapter); |
| |
| /* let the f/w know that the h/w is now under the control of the |
| * driver. |
| */ |
| igc_get_hw_control(adapter); |
| |
| strncpy(netdev->name, "eth%d", IFNAMSIZ); |
| err = register_netdev(netdev); |
| if (err) |
| goto err_register; |
| |
| /* carrier off reporting is important to ethtool even BEFORE open */ |
| netif_carrier_off(netdev); |
| |
| /* Check if Media Autosense is enabled */ |
| adapter->ei = *ei; |
| |
| /* print pcie link status and MAC address */ |
| pcie_print_link_status(pdev); |
| netdev_info(netdev, "MAC: %pM\n", netdev->dev_addr); |
| |
| return 0; |
| |
| err_register: |
| igc_release_hw_control(adapter); |
| err_eeprom: |
| if (!igc_check_reset_block(hw)) |
| igc_reset_phy(hw); |
| err_sw_init: |
| igc_clear_interrupt_scheme(adapter); |
| iounmap(adapter->io_addr); |
| err_ioremap: |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_selected_regions(pdev, |
| pci_select_bars(pdev, IORESOURCE_MEM)); |
| err_pci_reg: |
| err_dma: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * igc_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * igc_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. This could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| */ |
| static void igc_remove(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct igc_adapter *adapter = netdev_priv(netdev); |
| |
| set_bit(__IGC_DOWN, &adapter->state); |
| |
| del_timer_sync(&adapter->watchdog_timer); |
| del_timer_sync(&adapter->phy_info_timer); |
| |
| cancel_work_sync(&adapter->reset_task); |
| cancel_work_sync(&adapter->watchdog_task); |
| |
| /* Release control of h/w to f/w. If f/w is AMT enabled, this |
| * would have already happened in close and is redundant. |
| */ |
| igc_release_hw_control(adapter); |
| unregister_netdev(netdev); |
| |
| igc_clear_interrupt_scheme(adapter); |
| pci_iounmap(pdev, adapter->io_addr); |
| pci_release_mem_regions(pdev); |
| |
| kfree(adapter->mac_table); |
| kfree(adapter->shadow_vfta); |
| free_netdev(netdev); |
| |
| pci_disable_pcie_error_reporting(pdev); |
| |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_driver igc_driver = { |
| .name = igc_driver_name, |
| .id_table = igc_pci_tbl, |
| .probe = igc_probe, |
| .remove = igc_remove, |
| }; |
| |
| static void igc_set_flag_queue_pairs(struct igc_adapter *adapter, |
| const u32 max_rss_queues) |
| { |
| /* Determine if we need to pair queues. */ |
| /* If rss_queues > half of max_rss_queues, pair the queues in |
| * order to conserve interrupts due to limited supply. |
| */ |
| if (adapter->rss_queues > (max_rss_queues / 2)) |
| adapter->flags |= IGC_FLAG_QUEUE_PAIRS; |
| else |
| adapter->flags &= ~IGC_FLAG_QUEUE_PAIRS; |
| } |
| |
| static unsigned int igc_get_max_rss_queues(struct igc_adapter *adapter) |
| { |
| unsigned int max_rss_queues; |
| |
| /* Determine the maximum number of RSS queues supported. */ |
| max_rss_queues = IGC_MAX_RX_QUEUES; |
| |
| return max_rss_queues; |
| } |
| |
| static void igc_init_queue_configuration(struct igc_adapter *adapter) |
| { |
| u32 max_rss_queues; |
| |
| max_rss_queues = igc_get_max_rss_queues(adapter); |
| adapter->rss_queues = min_t(u32, max_rss_queues, num_online_cpus()); |
| |
| igc_set_flag_queue_pairs(adapter, max_rss_queues); |
| } |
| |
| /** |
| * igc_sw_init - Initialize general software structures (struct igc_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * igc_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| */ |
| static int igc_sw_init(struct igc_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct pci_dev *pdev = adapter->pdev; |
| struct igc_hw *hw = &adapter->hw; |
| |
| int size = sizeof(struct igc_mac_addr) * hw->mac.rar_entry_count; |
| |
| pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); |
| |
| /* set default ring sizes */ |
| adapter->tx_ring_count = IGC_DEFAULT_TXD; |
| adapter->rx_ring_count = IGC_DEFAULT_RXD; |
| |
| /* set default ITR values */ |
| adapter->rx_itr_setting = IGC_DEFAULT_ITR; |
| adapter->tx_itr_setting = IGC_DEFAULT_ITR; |
| |
| /* set default work limits */ |
| adapter->tx_work_limit = IGC_DEFAULT_TX_WORK; |
| |
| /* adjust max frame to be at least the size of a standard frame */ |
| adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + |
| VLAN_HLEN; |
| adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; |
| |
| spin_lock_init(&adapter->nfc_lock); |
| spin_lock_init(&adapter->stats64_lock); |
| /* Assume MSI-X interrupts, will be checked during IRQ allocation */ |
| adapter->flags |= IGC_FLAG_HAS_MSIX; |
| |
| adapter->mac_table = kzalloc(size, GFP_ATOMIC); |
| if (!adapter->mac_table) |
| return -ENOMEM; |
| |
| igc_init_queue_configuration(adapter); |
| |
| /* This call may decrease the number of queues */ |
| if (igc_init_interrupt_scheme(adapter, true)) { |
| dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); |
| return -ENOMEM; |
| } |
| |
| /* Explicitly disable IRQ since the NIC can be in any state. */ |
| igc_irq_disable(adapter); |
| |
| set_bit(__IGC_DOWN, &adapter->state); |
| |
| return 0; |
| } |
| |
| /** |
| * igc_get_hw_dev - return device |
| * @hw: pointer to hardware structure |
| * |
| * used by hardware layer to print debugging information |
| */ |
| struct net_device *igc_get_hw_dev(struct igc_hw *hw) |
| { |
| struct igc_adapter *adapter = hw->back; |
| |
| return adapter->netdev; |
| } |
| |
| /** |
| * igc_init_module - Driver Registration Routine |
| * |
| * igc_init_module is the first routine called when the driver is |
| * loaded. All it does is register with the PCI subsystem. |
| */ |
| static int __init igc_init_module(void) |
| { |
| int ret; |
| |
| pr_info("%s - version %s\n", |
| igc_driver_string, igc_driver_version); |
| |
| pr_info("%s\n", igc_copyright); |
| |
| ret = pci_register_driver(&igc_driver); |
| return ret; |
| } |
| |
| module_init(igc_init_module); |
| |
| /** |
| * igc_exit_module - Driver Exit Cleanup Routine |
| * |
| * igc_exit_module is called just before the driver is removed |
| * from memory. |
| */ |
| static void __exit igc_exit_module(void) |
| { |
| pci_unregister_driver(&igc_driver); |
| } |
| |
| module_exit(igc_exit_module); |
| /* igc_main.c */ |