| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * An I2C driver for the PCF85063 RTC |
| * Copyright 2014 Rose Technology |
| * |
| * Author: Søren Andersen <san@rosetechnology.dk> |
| * Maintainers: http://www.nslu2-linux.org/ |
| * |
| * Copyright (C) 2019 Micro Crystal AG |
| * Author: Alexandre Belloni <alexandre.belloni@bootlin.com> |
| */ |
| #include <linux/i2c.h> |
| #include <linux/bcd.h> |
| #include <linux/rtc.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/pm_wakeirq.h> |
| #include <linux/regmap.h> |
| |
| /* |
| * Information for this driver was pulled from the following datasheets. |
| * |
| * http://www.nxp.com/documents/data_sheet/PCF85063A.pdf |
| * http://www.nxp.com/documents/data_sheet/PCF85063TP.pdf |
| * |
| * PCF85063A -- Rev. 6 — 18 November 2015 |
| * PCF85063TP -- Rev. 4 — 6 May 2015 |
| * |
| * https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-8263-C7_App-Manual.pdf |
| * RV8263 -- Rev. 1.0 — January 2019 |
| */ |
| |
| #define PCF85063_REG_CTRL1 0x00 /* status */ |
| #define PCF85063_REG_CTRL1_CAP_SEL BIT(0) |
| #define PCF85063_REG_CTRL1_STOP BIT(5) |
| |
| #define PCF85063_REG_CTRL2 0x01 |
| #define PCF85063_CTRL2_AF BIT(6) |
| #define PCF85063_CTRL2_AIE BIT(7) |
| |
| #define PCF85063_REG_OFFSET 0x02 |
| #define PCF85063_OFFSET_SIGN_BIT 6 /* 2's complement sign bit */ |
| #define PCF85063_OFFSET_MODE BIT(7) |
| #define PCF85063_OFFSET_STEP0 4340 |
| #define PCF85063_OFFSET_STEP1 4069 |
| |
| #define PCF85063_REG_RAM 0x03 |
| |
| #define PCF85063_REG_SC 0x04 /* datetime */ |
| #define PCF85063_REG_SC_OS 0x80 |
| |
| #define PCF85063_REG_ALM_S 0x0b |
| #define PCF85063_AEN BIT(7) |
| |
| struct pcf85063_config { |
| struct regmap_config regmap; |
| unsigned has_alarms:1; |
| unsigned force_cap_7000:1; |
| }; |
| |
| struct pcf85063 { |
| struct rtc_device *rtc; |
| struct regmap *regmap; |
| }; |
| |
| static int pcf85063_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| int rc; |
| u8 regs[7]; |
| |
| /* |
| * while reading, the time/date registers are blocked and not updated |
| * anymore until the access is finished. To not lose a second |
| * event, the access must be finished within one second. So, read all |
| * time/date registers in one turn. |
| */ |
| rc = regmap_bulk_read(pcf85063->regmap, PCF85063_REG_SC, regs, |
| sizeof(regs)); |
| if (rc) |
| return rc; |
| |
| /* if the clock has lost its power it makes no sense to use its time */ |
| if (regs[0] & PCF85063_REG_SC_OS) { |
| dev_warn(&pcf85063->rtc->dev, "Power loss detected, invalid time\n"); |
| return -EINVAL; |
| } |
| |
| tm->tm_sec = bcd2bin(regs[0] & 0x7F); |
| tm->tm_min = bcd2bin(regs[1] & 0x7F); |
| tm->tm_hour = bcd2bin(regs[2] & 0x3F); /* rtc hr 0-23 */ |
| tm->tm_mday = bcd2bin(regs[3] & 0x3F); |
| tm->tm_wday = regs[4] & 0x07; |
| tm->tm_mon = bcd2bin(regs[5] & 0x1F) - 1; /* rtc mn 1-12 */ |
| tm->tm_year = bcd2bin(regs[6]); |
| tm->tm_year += 100; |
| |
| return 0; |
| } |
| |
| static int pcf85063_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| int rc; |
| u8 regs[7]; |
| |
| /* |
| * to accurately set the time, reset the divider chain and keep it in |
| * reset state until all time/date registers are written |
| */ |
| rc = regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1, |
| PCF85063_REG_CTRL1_STOP, |
| PCF85063_REG_CTRL1_STOP); |
| if (rc) |
| return rc; |
| |
| /* hours, minutes and seconds */ |
| regs[0] = bin2bcd(tm->tm_sec) & 0x7F; /* clear OS flag */ |
| |
| regs[1] = bin2bcd(tm->tm_min); |
| regs[2] = bin2bcd(tm->tm_hour); |
| |
| /* Day of month, 1 - 31 */ |
| regs[3] = bin2bcd(tm->tm_mday); |
| |
| /* Day, 0 - 6 */ |
| regs[4] = tm->tm_wday & 0x07; |
| |
| /* month, 1 - 12 */ |
| regs[5] = bin2bcd(tm->tm_mon + 1); |
| |
| /* year and century */ |
| regs[6] = bin2bcd(tm->tm_year - 100); |
| |
| /* write all registers at once */ |
| rc = regmap_bulk_write(pcf85063->regmap, PCF85063_REG_SC, |
| regs, sizeof(regs)); |
| if (rc) |
| return rc; |
| |
| /* |
| * Write the control register as a separate action since the size of |
| * the register space is different between the PCF85063TP and |
| * PCF85063A devices. The rollover point can not be used. |
| */ |
| return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1, |
| PCF85063_REG_CTRL1_STOP, 0); |
| } |
| |
| static int pcf85063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| u8 buf[4]; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_bulk_read(pcf85063->regmap, PCF85063_REG_ALM_S, |
| buf, sizeof(buf)); |
| if (ret) |
| return ret; |
| |
| alrm->time.tm_sec = bcd2bin(buf[0]); |
| alrm->time.tm_min = bcd2bin(buf[1]); |
| alrm->time.tm_hour = bcd2bin(buf[2]); |
| alrm->time.tm_mday = bcd2bin(buf[3]); |
| |
| ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val); |
| if (ret) |
| return ret; |
| |
| alrm->enabled = !!(val & PCF85063_CTRL2_AIE); |
| |
| return 0; |
| } |
| |
| static int pcf85063_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| u8 buf[5]; |
| int ret; |
| |
| buf[0] = bin2bcd(alrm->time.tm_sec); |
| buf[1] = bin2bcd(alrm->time.tm_min); |
| buf[2] = bin2bcd(alrm->time.tm_hour); |
| buf[3] = bin2bcd(alrm->time.tm_mday); |
| buf[4] = PCF85063_AEN; /* Do not match on week day */ |
| |
| ret = regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2, |
| PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF, 0); |
| if (ret) |
| return ret; |
| |
| ret = regmap_bulk_write(pcf85063->regmap, PCF85063_REG_ALM_S, |
| buf, sizeof(buf)); |
| if (ret) |
| return ret; |
| |
| return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2, |
| PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF, |
| alrm->enabled ? PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF : PCF85063_CTRL2_AF); |
| } |
| |
| static int pcf85063_rtc_alarm_irq_enable(struct device *dev, |
| unsigned int enabled) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| |
| return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2, |
| PCF85063_CTRL2_AIE, |
| enabled ? PCF85063_CTRL2_AIE : 0); |
| } |
| |
| static irqreturn_t pcf85063_rtc_handle_irq(int irq, void *dev_id) |
| { |
| struct pcf85063 *pcf85063 = dev_id; |
| unsigned int val; |
| int err; |
| |
| err = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val); |
| if (err) |
| return IRQ_NONE; |
| |
| if (val & PCF85063_CTRL2_AF) { |
| rtc_update_irq(pcf85063->rtc, 1, RTC_IRQF | RTC_AF); |
| regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2, |
| PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF, |
| 0); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static int pcf85063_read_offset(struct device *dev, long *offset) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| long val; |
| u32 reg; |
| int ret; |
| |
| ret = regmap_read(pcf85063->regmap, PCF85063_REG_OFFSET, ®); |
| if (ret < 0) |
| return ret; |
| |
| val = sign_extend32(reg & ~PCF85063_OFFSET_MODE, |
| PCF85063_OFFSET_SIGN_BIT); |
| |
| if (reg & PCF85063_OFFSET_MODE) |
| *offset = val * PCF85063_OFFSET_STEP1; |
| else |
| *offset = val * PCF85063_OFFSET_STEP0; |
| |
| return 0; |
| } |
| |
| static int pcf85063_set_offset(struct device *dev, long offset) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| s8 mode0, mode1, reg; |
| unsigned int error0, error1; |
| |
| if (offset > PCF85063_OFFSET_STEP0 * 63) |
| return -ERANGE; |
| if (offset < PCF85063_OFFSET_STEP0 * -64) |
| return -ERANGE; |
| |
| mode0 = DIV_ROUND_CLOSEST(offset, PCF85063_OFFSET_STEP0); |
| mode1 = DIV_ROUND_CLOSEST(offset, PCF85063_OFFSET_STEP1); |
| |
| error0 = abs(offset - (mode0 * PCF85063_OFFSET_STEP0)); |
| error1 = abs(offset - (mode1 * PCF85063_OFFSET_STEP1)); |
| if (mode1 > 63 || mode1 < -64 || error0 < error1) |
| reg = mode0 & ~PCF85063_OFFSET_MODE; |
| else |
| reg = mode1 | PCF85063_OFFSET_MODE; |
| |
| return regmap_write(pcf85063->regmap, PCF85063_REG_OFFSET, reg); |
| } |
| |
| static int pcf85063_ioctl(struct device *dev, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct pcf85063 *pcf85063 = dev_get_drvdata(dev); |
| int status, ret = 0; |
| |
| switch (cmd) { |
| case RTC_VL_READ: |
| ret = regmap_read(pcf85063->regmap, PCF85063_REG_SC, &status); |
| if (ret < 0) |
| return ret; |
| |
| status = status & PCF85063_REG_SC_OS ? RTC_VL_DATA_INVALID : 0; |
| |
| return put_user(status, (unsigned int __user *)arg); |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| static const struct rtc_class_ops pcf85063_rtc_ops = { |
| .read_time = pcf85063_rtc_read_time, |
| .set_time = pcf85063_rtc_set_time, |
| .read_offset = pcf85063_read_offset, |
| .set_offset = pcf85063_set_offset, |
| .ioctl = pcf85063_ioctl, |
| }; |
| |
| static const struct rtc_class_ops pcf85063_rtc_ops_alarm = { |
| .read_time = pcf85063_rtc_read_time, |
| .set_time = pcf85063_rtc_set_time, |
| .read_offset = pcf85063_read_offset, |
| .set_offset = pcf85063_set_offset, |
| .read_alarm = pcf85063_rtc_read_alarm, |
| .set_alarm = pcf85063_rtc_set_alarm, |
| .alarm_irq_enable = pcf85063_rtc_alarm_irq_enable, |
| .ioctl = pcf85063_ioctl, |
| }; |
| |
| static int pcf85063_nvmem_read(void *priv, unsigned int offset, |
| void *val, size_t bytes) |
| { |
| return regmap_read(priv, PCF85063_REG_RAM, val); |
| } |
| |
| static int pcf85063_nvmem_write(void *priv, unsigned int offset, |
| void *val, size_t bytes) |
| { |
| return regmap_write(priv, PCF85063_REG_RAM, *(u8 *)val); |
| } |
| |
| static int pcf85063_load_capacitance(struct pcf85063 *pcf85063, |
| const struct device_node *np, |
| unsigned int force_cap) |
| { |
| u32 load = 7000; |
| u8 reg = 0; |
| |
| if (force_cap) |
| load = force_cap; |
| else |
| of_property_read_u32(np, "quartz-load-femtofarads", &load); |
| |
| switch (load) { |
| default: |
| dev_warn(&pcf85063->rtc->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 7000", |
| load); |
| /* fall through */ |
| case 7000: |
| break; |
| case 12500: |
| reg = PCF85063_REG_CTRL1_CAP_SEL; |
| break; |
| } |
| |
| return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1, |
| PCF85063_REG_CTRL1_CAP_SEL, reg); |
| } |
| |
| static const struct pcf85063_config pcf85063a_config = { |
| .regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x11, |
| }, |
| .has_alarms = 1, |
| }; |
| |
| static const struct pcf85063_config pcf85063tp_config = { |
| .regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x0a, |
| }, |
| }; |
| |
| static const struct pcf85063_config rv8263_config = { |
| .regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x11, |
| }, |
| .has_alarms = 1, |
| .force_cap_7000 = 1, |
| }; |
| |
| static int pcf85063_probe(struct i2c_client *client) |
| { |
| struct pcf85063 *pcf85063; |
| unsigned int tmp; |
| int err; |
| const struct pcf85063_config *config = &pcf85063tp_config; |
| const void *data = of_device_get_match_data(&client->dev); |
| struct nvmem_config nvmem_cfg = { |
| .name = "pcf85063_nvram", |
| .reg_read = pcf85063_nvmem_read, |
| .reg_write = pcf85063_nvmem_write, |
| .type = NVMEM_TYPE_BATTERY_BACKED, |
| .size = 1, |
| }; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| |
| pcf85063 = devm_kzalloc(&client->dev, sizeof(struct pcf85063), |
| GFP_KERNEL); |
| if (!pcf85063) |
| return -ENOMEM; |
| |
| if (data) |
| config = data; |
| |
| pcf85063->regmap = devm_regmap_init_i2c(client, &config->regmap); |
| if (IS_ERR(pcf85063->regmap)) |
| return PTR_ERR(pcf85063->regmap); |
| |
| i2c_set_clientdata(client, pcf85063); |
| |
| err = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL1, &tmp); |
| if (err) { |
| dev_err(&client->dev, "RTC chip is not present\n"); |
| return err; |
| } |
| |
| pcf85063->rtc = devm_rtc_allocate_device(&client->dev); |
| if (IS_ERR(pcf85063->rtc)) |
| return PTR_ERR(pcf85063->rtc); |
| |
| err = pcf85063_load_capacitance(pcf85063, client->dev.of_node, |
| config->force_cap_7000 ? 7000 : 0); |
| if (err < 0) |
| dev_warn(&client->dev, "failed to set xtal load capacitance: %d", |
| err); |
| |
| pcf85063->rtc->ops = &pcf85063_rtc_ops; |
| pcf85063->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; |
| pcf85063->rtc->range_max = RTC_TIMESTAMP_END_2099; |
| pcf85063->rtc->uie_unsupported = 1; |
| |
| if (config->has_alarms && client->irq > 0) { |
| err = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, pcf85063_rtc_handle_irq, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "pcf85063", pcf85063); |
| if (err) { |
| dev_warn(&pcf85063->rtc->dev, |
| "unable to request IRQ, alarms disabled\n"); |
| } else { |
| pcf85063->rtc->ops = &pcf85063_rtc_ops_alarm; |
| device_init_wakeup(&client->dev, true); |
| err = dev_pm_set_wake_irq(&client->dev, client->irq); |
| if (err) |
| dev_err(&pcf85063->rtc->dev, |
| "failed to enable irq wake\n"); |
| } |
| } |
| |
| nvmem_cfg.priv = pcf85063->regmap; |
| rtc_nvmem_register(pcf85063->rtc, &nvmem_cfg); |
| |
| return rtc_register_device(pcf85063->rtc); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id pcf85063_of_match[] = { |
| { .compatible = "nxp,pcf85063", .data = &pcf85063tp_config }, |
| { .compatible = "nxp,pcf85063tp", .data = &pcf85063tp_config }, |
| { .compatible = "nxp,pcf85063a", .data = &pcf85063a_config }, |
| { .compatible = "microcrystal,rv8263", .data = &rv8263_config }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, pcf85063_of_match); |
| #endif |
| |
| static struct i2c_driver pcf85063_driver = { |
| .driver = { |
| .name = "rtc-pcf85063", |
| .of_match_table = of_match_ptr(pcf85063_of_match), |
| }, |
| .probe_new = pcf85063_probe, |
| }; |
| |
| module_i2c_driver(pcf85063_driver); |
| |
| MODULE_AUTHOR("Søren Andersen <san@rosetechnology.dk>"); |
| MODULE_DESCRIPTION("PCF85063 RTC driver"); |
| MODULE_LICENSE("GPL"); |