blob: 334271a25f70b329d5aed75205ff46c02baabf62 [file] [log] [blame]
/*
* Devices shared by all Juno boards
*/
memtimer: timer@2a810000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x2a810000 0x0 0x10000>;
clock-frequency = <50000000>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
frame@2a830000 {
frame-number = <1>;
interrupts = <0 60 4>;
reg = <0x0 0x2a830000 0x0 0x10000>;
};
};
mailbox: mhu@2b1f0000 {
compatible = "arm,mhu", "arm,primecell";
reg = <0x0 0x2b1f0000 0x0 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mhu_lpri_rx",
"mhu_hpri_rx";
#mbox-cells = <1>;
clocks = <&soc_refclk100mhz>;
clock-names = "apb_pclk";
};
gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>,
<0x0 0x2c02f000 0 0x2000>,
<0x0 0x2c04f000 0 0x2000>,
<0x0 0x2c06f000 0 0x2000>;
#address-cells = <2>;
#interrupt-cells = <3>;
#size-cells = <2>;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
ranges = <0 0 0 0x2c1c0000 0 0x40000>;
v2m_0: v2m@0 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0 0 0 0x1000>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
};
/*
* Juno TRMs specify the size for these coresight components as 64K.
* The actual size is just 4K though 64K is reserved. Access to the
* unmapped reserved region results in a DECERR response.
*/
etf@20010000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
/* input port */
port@0 {
reg = <0>;
etf_in_port: endpoint {
slave-mode;
remote-endpoint = <&main_funnel_out_port>;
};
};
/* output port */
port@1 {
reg = <0>;
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
};
};
};
tpiu@20030000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0x20030000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
tpiu_in_port: endpoint {
slave-mode;
remote-endpoint = <&replicator_out_port0>;
};
};
};
main-funnel@20040000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
main_funnel_out_port: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
port@1 {
reg = <0>;
main_funnel_in_port0: endpoint {
slave-mode;
remote-endpoint = <&cluster0_funnel_out_port>;
};
};
port@2 {
reg = <1>;
main_funnel_in_port1: endpoint {
slave-mode;
remote-endpoint = <&cluster1_funnel_out_port>;
};
};
};
};
etr@20070000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20070000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
etr_in_port: endpoint {
slave-mode;
remote-endpoint = <&replicator_out_port1>;
};
};
};
etm0: etm@22040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22040000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
cluster0_etm0_out_port: endpoint {
remote-endpoint = <&cluster0_funnel_in_port0>;
};
};
};
cluster0-funnel@220c0000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x220c0000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
cluster0_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port0>;
};
};
port@1 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
slave-mode;
remote-endpoint = <&cluster0_etm0_out_port>;
};
};
port@2 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
slave-mode;
remote-endpoint = <&cluster0_etm1_out_port>;
};
};
};
};
etm1: etm@22140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22140000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
cluster0_etm1_out_port: endpoint {
remote-endpoint = <&cluster0_funnel_in_port1>;
};
};
};
etm2: etm@23040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23040000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
cluster1_etm0_out_port: endpoint {
remote-endpoint = <&cluster1_funnel_in_port0>;
};
};
};
cluster1-funnel@230c0000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0 0x230c0000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
cluster1_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port1>;
};
};
port@1 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
slave-mode;
remote-endpoint = <&cluster1_etm0_out_port>;
};
};
port@2 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
slave-mode;
remote-endpoint = <&cluster1_etm1_out_port>;
};
};
port@3 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
slave-mode;
remote-endpoint = <&cluster1_etm2_out_port>;
};
};
port@4 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
slave-mode;
remote-endpoint = <&cluster1_etm3_out_port>;
};
};
};
};
etm3: etm@23140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23140000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
cluster1_etm1_out_port: endpoint {
remote-endpoint = <&cluster1_funnel_in_port1>;
};
};
};
etm4: etm@23240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23240000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
cluster1_etm2_out_port: endpoint {
remote-endpoint = <&cluster1_funnel_in_port2>;
};
};
};
etm5: etm@23340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x23340000 0 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
port {
cluster1_etm3_out_port: endpoint {
remote-endpoint = <&cluster1_funnel_in_port3>;
};
};
};
coresight-replicator {
/*
* Non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-replicator";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
port@1 {
reg = <1>;
replicator_out_port1: endpoint {
remote-endpoint = <&etr_in_port>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator_in_port0: endpoint {
slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
};
};
sram: sram@2e000000 {
compatible = "arm,juno-sram-ns", "mmio-sram";
reg = <0x0 0x2e000000 0x0 0x8000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x2e000000 0x8000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "arm,juno-scp-shmem";
reg = <0x0 0x200>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "arm,juno-scp-shmem";
reg = <0x200 0x200>;
};
};
pcie_ctlr: pcie-controller@40000000 {
compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
device_type = "pci";
reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
bus-range = <0 255>;
linux,pci-domain = <0>;
#address-cells = <3>;
#size-cells = <2>;
dma-coherent;
ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
<0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
<0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
<0 0 0 2 &gic 0 0 0 137 4>,
<0 0 0 3 &gic 0 0 0 138 4>,
<0 0 0 4 &gic 0 0 0 139 4>;
msi-parent = <&v2m_0>;
status = "disabled";
};
scpi {
compatible = "arm,scpi";
mboxes = <&mailbox 1>;
shmem = <&cpu_scp_hpri>;
clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi-dvfs {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>, <1>, <2>;
clock-output-names = "atlclk", "aplclk","gpuclk";
};
scpi_clk: scpi-clk {
compatible = "arm,scpi-variable-clocks";
#clock-cells = <1>;
clock-indices = <3>;
clock-output-names = "pxlclk";
};
};
scpi_devpd: scpi-power-domains {
compatible = "arm,scpi-power-domains";
num-domains = <2>;
#power-domain-cells = <1>;
};
scpi_sensors0: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
thermal-zones {
pmic {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 0>;
};
soc {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 3>;
};
big_cluster_thermal_zone: big_cluster {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 21>;
status = "disabled";
};
little_cluster_thermal_zone: little_cluster {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 22>;
status = "disabled";
};
gpu0_thermal_zone: gpu0 {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 23>;
status = "disabled";
};
gpu1_thermal_zone: gpu1 {
polling-delay = <1000>;
polling-delay-passive = <100>;
thermal-sensors = <&scpi_sensors0 24>;
status = "disabled";
};
};
/include/ "juno-clocks.dtsi"
dma@7ff00000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0x7ff00000 0 0x1000>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_faxiclk>;
clock-names = "apb_pclk";
};
hdlcd@7ff50000 {
compatible = "arm,hdlcd";
reg = <0 0x7ff50000 0 0x1000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scpi_clk 3>;
clock-names = "pxlclk";
port {
hdlcd1_output: hdlcd1-endpoint {
remote-endpoint = <&tda998x_1_input>;
};
};
};
hdlcd@7ff60000 {
compatible = "arm,hdlcd";
reg = <0 0x7ff60000 0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&scpi_clk 3>;
clock-names = "pxlclk";
port {
hdlcd0_output: hdlcd0-endpoint {
remote-endpoint = <&tda998x_0_input>;
};
};
};
soc_uart0: uart@7ff80000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0x7ff80000 0x0 0x1000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
clock-names = "uartclk", "apb_pclk";
};
i2c@7ffa0000 {
compatible = "snps,designware-i2c";
reg = <0x0 0x7ffa0000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <500>;
clocks = <&soc_smc50mhz>;
hdmi-transmitter@70 {
compatible = "nxp,tda998x";
reg = <0x70>;
port {
tda998x_0_input: tda998x-0-endpoint {
remote-endpoint = <&hdlcd0_output>;
};
};
};
hdmi-transmitter@71 {
compatible = "nxp,tda998x";
reg = <0x71>;
port {
tda998x_1_input: tda998x-1-endpoint {
remote-endpoint = <&hdlcd1_output>;
};
};
};
};
ohci@7ffb0000 {
compatible = "generic-ohci";
reg = <0x0 0x7ffb0000 0x0 0x10000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_usb48mhz>;
};
ehci@7ffc0000 {
compatible = "generic-ehci";
reg = <0x0 0x7ffc0000 0x0 0x10000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_usb48mhz>;
};
memory-controller@7ffd0000 {
compatible = "arm,pl354", "arm,primecell";
reg = <0 0x7ffd0000 0 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
};
memory@80000000 {
device_type = "memory";
/* last 16MB of the first memory area is reserved for secure world use by firmware */
reg = <0x00000000 0x80000000 0x0 0x7f000000>,
<0x00000008 0x80000000 0x1 0x80000000>;
};
smb@08000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0x08000000 0x04000000>,
<1 0 0 0x14000000 0x04000000>,
<2 0 0 0x18000000 0x04000000>,
<3 0 0 0x1c000000 0x04000000>,
<4 0 0 0x0c000000 0x04000000>,
<5 0 0 0x10000000 0x04000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 15>;
interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
<0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
<0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
<0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
<0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
<0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
<0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
<0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
<0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
<0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
<0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
<0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
<0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
/include/ "juno-motherboard.dtsi"
};
site2: tlx@60000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x60000000 0x10000000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0>;
interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>;
};