blob: bf6fbd5d22a1a53af196be2a15f5593468f78da4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
#include <linux/efi.h>
#include <asm/efi.h>
#include "efistub.h"
/**
* efi_low_alloc_above() - allocate pages at or above given address
* @size: size of the memory area to allocate
* @align: minimum alignment of the allocated memory area. It should
* a power of two.
* @addr: on exit the address of the allocated memory
* @min: minimum address to used for the memory allocation
*
* Allocate at the lowest possible address that is not below @min as
* EFI_LOADER_DATA. The allocated pages are aligned according to @align but at
* least EFI_ALLOC_ALIGN. The first allocated page will not below the address
* given by @min.
*
* Return: status code
*/
efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
unsigned long *addr, unsigned long min)
{
struct efi_boot_memmap *map;
efi_status_t status;
unsigned long nr_pages;
int i;
status = efi_get_memory_map(&map, false);
if (status != EFI_SUCCESS)
goto fail;
/*
* Enforce minimum alignment that EFI or Linux requires when
* requesting a specific address. We are doing page-based (or
* larger) allocations, and both the address and size must meet
* alignment constraints.
*/
if (align < EFI_ALLOC_ALIGN)
align = EFI_ALLOC_ALIGN;
size = round_up(size, EFI_ALLOC_ALIGN);
nr_pages = size / EFI_PAGE_SIZE;
for (i = 0; i < map->map_size / map->desc_size; i++) {
efi_memory_desc_t *desc;
unsigned long m = (unsigned long)map->map;
u64 start, end;
desc = efi_early_memdesc_ptr(m, map->desc_size, i);
if (desc->type != EFI_CONVENTIONAL_MEMORY)
continue;
if (efi_soft_reserve_enabled() &&
(desc->attribute & EFI_MEMORY_SP))
continue;
if (desc->num_pages < nr_pages)
continue;
start = desc->phys_addr;
end = start + desc->num_pages * EFI_PAGE_SIZE;
if (start < min)
start = min;
start = round_up(start, align);
if ((start + size) > end)
continue;
status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
EFI_LOADER_DATA, nr_pages, &start);
if (status == EFI_SUCCESS) {
*addr = start;
break;
}
}
if (i == map->map_size / map->desc_size)
status = EFI_NOT_FOUND;
efi_bs_call(free_pool, map);
fail:
return status;
}
/**
* efi_relocate_kernel() - copy memory area
* @image_addr: pointer to address of memory area to copy
* @image_size: size of memory area to copy
* @alloc_size: minimum size of memory to allocate, must be greater or
* equal to image_size
* @preferred_addr: preferred target address
* @alignment: minimum alignment of the allocated memory area. It
* should be a power of two.
* @min_addr: minimum target address
*
* Copy a memory area to a newly allocated memory area aligned according
* to @alignment but at least EFI_ALLOC_ALIGN. If the preferred address
* is not available, the allocated address will not be below @min_addr.
* On exit, @image_addr is updated to the target copy address that was used.
*
* This function is used to copy the Linux kernel verbatim. It does not apply
* any relocation changes.
*
* Return: status code
*/
efi_status_t efi_relocate_kernel(unsigned long *image_addr,
unsigned long image_size,
unsigned long alloc_size,
unsigned long preferred_addr,
unsigned long alignment,
unsigned long min_addr)
{
unsigned long cur_image_addr;
unsigned long new_addr = 0;
efi_status_t status;
unsigned long nr_pages;
efi_physical_addr_t efi_addr = preferred_addr;
if (!image_addr || !image_size || !alloc_size)
return EFI_INVALID_PARAMETER;
if (alloc_size < image_size)
return EFI_INVALID_PARAMETER;
cur_image_addr = *image_addr;
/*
* The EFI firmware loader could have placed the kernel image
* anywhere in memory, but the kernel has restrictions on the
* max physical address it can run at. Some architectures
* also have a preferred address, so first try to relocate
* to the preferred address. If that fails, allocate as low
* as possible while respecting the required alignment.
*/
nr_pages = round_up(alloc_size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
EFI_LOADER_DATA, nr_pages, &efi_addr);
new_addr = efi_addr;
/*
* If preferred address allocation failed allocate as low as
* possible.
*/
if (status != EFI_SUCCESS) {
status = efi_low_alloc_above(alloc_size, alignment, &new_addr,
min_addr);
}
if (status != EFI_SUCCESS) {
efi_err("Failed to allocate usable memory for kernel.\n");
return status;
}
/*
* We know source/dest won't overlap since both memory ranges
* have been allocated by UEFI, so we can safely use memcpy.
*/
memcpy((void *)new_addr, (void *)cur_image_addr, image_size);
/* Return the new address of the relocated image. */
*image_addr = new_addr;
return status;
}