blob: 2a1605e67b65d3ab4c5bbb1e4bac0040fdefdf89 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2019-2023 Linaro Ltd.
*/
#ifndef _IPA_DATA_H_
#define _IPA_DATA_H_
#include <linux/types.h>
#include "ipa_version.h"
#include "ipa_endpoint.h"
#include "ipa_mem.h"
/**
* DOC: IPA/GSI Configuration Data
*
* Boot-time configuration data is used to define the configuration of the
* IPA and GSI resources to use for a given platform. This data is supplied
* via the Device Tree match table, associated with a particular compatible
* string. The data defines information about how resources, endpoints and
* channels, memory, power and so on are allocated and used for the
* platform.
*
* Resources are data structures used internally by the IPA hardware. The
* configuration data defines the number (or limits of the number) of various
* types of these resources.
*
* Endpoint configuration data defines properties of both IPA endpoints and
* GSI channels. A channel is a GSI construct, and represents a single
* communication path between the IPA and a particular execution environment
* (EE), such as the AP or Modem. Each EE has a set of channels associated
* with it, and each channel has an ID unique for that EE. For the most part
* the only GSI channels of concern to this driver belong to the AP.
*
* An endpoint is an IPA construct representing a single channel anywhere
* in the system. An IPA endpoint ID maps directly to an (EE, channel_id)
* pair. Generally, this driver is concerned with only endpoints associated
* with the AP, however this will change when support for routing (etc.) is
* added. IPA endpoint and GSI channel configuration data are defined
* together, establishing the endpoint_id->(EE, channel_id) mapping.
*
* Endpoint configuration data consists of three parts: properties that
* are common to IPA and GSI (EE ID, channel ID, endpoint ID, and direction);
* properties associated with the GSI channel; and properties associated with
* the IPA endpoint.
*/
/* The maximum possible number of source or destination resource groups */
#define IPA_RESOURCE_GROUP_MAX 8
/** enum ipa_qsb_master_id - array index for IPA QSB configuration data */
enum ipa_qsb_master_id {
IPA_QSB_MASTER_DDR,
IPA_QSB_MASTER_PCIE,
};
/**
* struct ipa_qsb_data - Qualcomm System Bus configuration data
* @max_writes: Maximum outstanding write requests for this master
* @max_reads: Maximum outstanding read requests for this master
* @max_reads_beats: Max outstanding read bytes in 8-byte "beats" (if non-zero)
*/
struct ipa_qsb_data {
u8 max_writes;
u8 max_reads;
u8 max_reads_beats; /* Not present for IPA v3.5.1 */
};
/**
* struct gsi_channel_data - GSI channel configuration data
* @tre_count: number of TREs in the channel ring
* @event_count: number of slots in the associated event ring
* @tlv_count: number of entries in channel's TLV FIFO
*
* A GSI channel is a unidirectional means of transferring data to or
* from (and through) the IPA. A GSI channel has a ring buffer made
* up of "transfer ring elements" (TREs) that specify individual data
* transfers or IPA immediate commands. TREs are filled by the AP,
* and control is passed to IPA hardware by writing the last written
* element into a doorbell register.
*
* When data transfer commands have completed the GSI generates an
* event (a structure of data) and optionally signals the AP with
* an interrupt. Event structures are implemented by another ring
* buffer, directed toward the AP from the IPA.
*
* The input to a GSI channel is a FIFO of type/length/value (TLV)
* elements, and the size of this FIFO limits the number of TREs
* that can be included in a single transaction.
*/
struct gsi_channel_data {
u16 tre_count; /* must be a power of 2 */
u16 event_count; /* must be a power of 2 */
u8 tlv_count;
};
/**
* struct ipa_endpoint_data - IPA endpoint configuration data
* @filter_support: whether endpoint supports filtering
* @config: hardware configuration
*
* Not all endpoints support the IPA filtering capability. A filter table
* defines the filters to apply for those endpoints that support it. The
* AP is responsible for initializing this table, and it must include entries
* for non-AP endpoints. For this reason we define *all* endpoints used
* in the system, and indicate whether they support filtering.
*
* The remaining endpoint configuration data specifies default hardware
* configuration values that apply only to AP endpoints.
*/
struct ipa_endpoint_data {
bool filter_support;
struct ipa_endpoint_config config;
};
/**
* struct ipa_gsi_endpoint_data - GSI channel/IPA endpoint data
* @ee_id: GSI execution environment ID
* @channel_id: GSI channel ID
* @endpoint_id: IPA endpoint ID
* @toward_ipa: direction of data transfer
* @channel: GSI channel configuration data (see above)
* @endpoint: IPA endpoint configuration data (see above)
*/
struct ipa_gsi_endpoint_data {
u8 ee_id; /* enum gsi_ee_id */
u8 channel_id;
u8 endpoint_id;
bool toward_ipa;
struct gsi_channel_data channel;
struct ipa_endpoint_data endpoint;
};
/**
* struct ipa_resource_limits - minimum and maximum resource counts
* @min: minimum number of resources of a given type
* @max: maximum number of resources of a given type
*/
struct ipa_resource_limits {
u32 min;
u32 max;
};
/**
* struct ipa_resource - resource group source or destination resource usage
* @limits: array of resource limits, indexed by group
*/
struct ipa_resource {
struct ipa_resource_limits limits[IPA_RESOURCE_GROUP_MAX];
};
/**
* struct ipa_resource_data - IPA resource configuration data
* @rsrc_group_src_count: number of source resource groups supported
* @rsrc_group_dst_count: number of destination resource groups supported
* @resource_src_count: number of entries in the resource_src array
* @resource_src: source endpoint group resources
* @resource_dst_count: number of entries in the resource_dst array
* @resource_dst: destination endpoint group resources
*
* In order to manage quality of service between endpoints, certain resources
* required for operation are allocated to groups of endpoints. Generally
* this information is invisible to the AP, but the AP is responsible for
* programming it at initialization time, so we specify it here.
*/
struct ipa_resource_data {
u32 rsrc_group_src_count;
u32 rsrc_group_dst_count;
u32 resource_src_count;
const struct ipa_resource *resource_src;
u32 resource_dst_count;
const struct ipa_resource *resource_dst;
};
/**
* struct ipa_mem_data - description of IPA memory regions
* @local_count: number of regions defined in the local[] array
* @local: array of IPA-local memory region descriptors
* @imem_addr: physical address of IPA region within IMEM
* @imem_size: size in bytes of IPA IMEM region
* @smem_id: item identifier for IPA region within SMEM memory
* @smem_size: size in bytes of the IPA SMEM region
*/
struct ipa_mem_data {
u32 local_count;
const struct ipa_mem *local;
u32 imem_addr;
u32 imem_size;
u32 smem_id;
u32 smem_size;
};
/**
* struct ipa_interconnect_data - description of IPA interconnect bandwidths
* @name: Interconnect name (matches interconnect-name in DT)
* @peak_bandwidth: Peak interconnect bandwidth (in 1000 byte/sec units)
* @average_bandwidth: Average interconnect bandwidth (in 1000 byte/sec units)
*/
struct ipa_interconnect_data {
const char *name;
u32 peak_bandwidth;
u32 average_bandwidth;
};
/**
* struct ipa_power_data - description of IPA power configuration data
* @core_clock_rate: Core clock rate (Hz)
* @interconnect_count: Number of entries in the interconnect_data array
* @interconnect_data: IPA interconnect configuration data
*/
struct ipa_power_data {
u32 core_clock_rate;
u32 interconnect_count; /* # entries in interconnect_data[] */
const struct ipa_interconnect_data *interconnect_data;
};
/**
* struct ipa_data - combined IPA/GSI configuration data
* @version: IPA hardware version
* @backward_compat: BCR register value (prior to IPA v4.5 only)
* @qsb_count: number of entries in the qsb_data array
* @qsb_data: Qualcomm System Bus configuration data
* @modem_route_count: number of modem entries in a routing table
* @endpoint_count: number of entries in the endpoint_data array
* @endpoint_data: IPA endpoint/GSI channel data
* @resource_data: IPA resource configuration data
* @mem_data: IPA memory region data
* @power_data: IPA power data
*/
struct ipa_data {
enum ipa_version version;
u32 backward_compat;
u32 qsb_count; /* number of entries in qsb_data[] */
const struct ipa_qsb_data *qsb_data;
u32 modem_route_count;
u32 endpoint_count; /* number of entries in endpoint_data[] */
const struct ipa_gsi_endpoint_data *endpoint_data;
const struct ipa_resource_data *resource_data;
const struct ipa_mem_data *mem_data;
const struct ipa_power_data *power_data;
};
extern const struct ipa_data ipa_data_v3_1;
extern const struct ipa_data ipa_data_v3_5_1;
extern const struct ipa_data ipa_data_v4_2;
extern const struct ipa_data ipa_data_v4_5;
extern const struct ipa_data ipa_data_v4_7;
extern const struct ipa_data ipa_data_v4_9;
extern const struct ipa_data ipa_data_v4_11;
extern const struct ipa_data ipa_data_v5_0;
extern const struct ipa_data ipa_data_v5_5;
#endif /* _IPA_DATA_H_ */