| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2020 Intel Corporation. |
| |
| #include <asm/unaligned.h> |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/regmap.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-fwnode.h> |
| |
| #define OV2740_LINK_FREQ_360MHZ 360000000ULL |
| #define OV2740_SCLK 72000000LL |
| #define OV2740_MCLK 19200000 |
| #define OV2740_DATA_LANES 2 |
| #define OV2740_RGB_DEPTH 10 |
| |
| #define OV2740_REG_CHIP_ID 0x300a |
| #define OV2740_CHIP_ID 0x2740 |
| |
| #define OV2740_REG_MODE_SELECT 0x0100 |
| #define OV2740_MODE_STANDBY 0x00 |
| #define OV2740_MODE_STREAMING 0x01 |
| |
| /* vertical-timings from sensor */ |
| #define OV2740_REG_VTS 0x380e |
| #define OV2740_VTS_DEF 0x088a |
| #define OV2740_VTS_MIN 0x0460 |
| #define OV2740_VTS_MAX 0x7fff |
| |
| /* horizontal-timings from sensor */ |
| #define OV2740_REG_HTS 0x380c |
| |
| /* Exposure controls from sensor */ |
| #define OV2740_REG_EXPOSURE 0x3500 |
| #define OV2740_EXPOSURE_MIN 8 |
| #define OV2740_EXPOSURE_MAX_MARGIN 8 |
| #define OV2740_EXPOSURE_STEP 1 |
| |
| /* Analog gain controls from sensor */ |
| #define OV2740_REG_ANALOG_GAIN 0x3508 |
| #define OV2740_ANAL_GAIN_MIN 128 |
| #define OV2740_ANAL_GAIN_MAX 1983 |
| #define OV2740_ANAL_GAIN_STEP 1 |
| |
| /* Digital gain controls from sensor */ |
| #define OV2740_REG_MWB_R_GAIN 0x500a |
| #define OV2740_REG_MWB_G_GAIN 0x500c |
| #define OV2740_REG_MWB_B_GAIN 0x500e |
| #define OV2740_DGTL_GAIN_MIN 0 |
| #define OV2740_DGTL_GAIN_MAX 4095 |
| #define OV2740_DGTL_GAIN_STEP 1 |
| #define OV2740_DGTL_GAIN_DEFAULT 1024 |
| |
| /* Test Pattern Control */ |
| #define OV2740_REG_TEST_PATTERN 0x5040 |
| #define OV2740_TEST_PATTERN_ENABLE BIT(7) |
| #define OV2740_TEST_PATTERN_BAR_SHIFT 2 |
| |
| /* ISP CTRL00 */ |
| #define OV2740_REG_ISP_CTRL00 0x5000 |
| /* ISP CTRL01 */ |
| #define OV2740_REG_ISP_CTRL01 0x5001 |
| /* Customer Addresses: 0x7010 - 0x710F */ |
| #define CUSTOMER_USE_OTP_SIZE 0x100 |
| /* OTP registers from sensor */ |
| #define OV2740_REG_OTP_CUSTOMER 0x7010 |
| |
| struct nvm_data { |
| char *nvm_buffer; |
| struct nvmem_device *nvmem; |
| struct regmap *regmap; |
| }; |
| |
| enum { |
| OV2740_LINK_FREQ_360MHZ_INDEX, |
| }; |
| |
| struct ov2740_reg { |
| u16 address; |
| u8 val; |
| }; |
| |
| struct ov2740_reg_list { |
| u32 num_of_regs; |
| const struct ov2740_reg *regs; |
| }; |
| |
| struct ov2740_link_freq_config { |
| const struct ov2740_reg_list reg_list; |
| }; |
| |
| struct ov2740_mode { |
| /* Frame width in pixels */ |
| u32 width; |
| |
| /* Frame height in pixels */ |
| u32 height; |
| |
| /* Horizontal timining size */ |
| u32 hts; |
| |
| /* Default vertical timining size */ |
| u32 vts_def; |
| |
| /* Min vertical timining size */ |
| u32 vts_min; |
| |
| /* Link frequency needed for this resolution */ |
| u32 link_freq_index; |
| |
| /* Sensor register settings for this resolution */ |
| const struct ov2740_reg_list reg_list; |
| }; |
| |
| static const struct ov2740_reg mipi_data_rate_720mbps[] = { |
| {0x0103, 0x01}, |
| {0x0302, 0x4b}, |
| {0x030d, 0x4b}, |
| {0x030e, 0x02}, |
| {0x030a, 0x01}, |
| {0x0312, 0x11}, |
| }; |
| |
| static const struct ov2740_reg mode_1932x1092_regs[] = { |
| {0x3000, 0x00}, |
| {0x3018, 0x32}, |
| {0x3031, 0x0a}, |
| {0x3080, 0x08}, |
| {0x3083, 0xB4}, |
| {0x3103, 0x00}, |
| {0x3104, 0x01}, |
| {0x3106, 0x01}, |
| {0x3500, 0x00}, |
| {0x3501, 0x44}, |
| {0x3502, 0x40}, |
| {0x3503, 0x88}, |
| {0x3507, 0x00}, |
| {0x3508, 0x00}, |
| {0x3509, 0x80}, |
| {0x350c, 0x00}, |
| {0x350d, 0x80}, |
| {0x3510, 0x00}, |
| {0x3511, 0x00}, |
| {0x3512, 0x20}, |
| {0x3632, 0x00}, |
| {0x3633, 0x10}, |
| {0x3634, 0x10}, |
| {0x3635, 0x10}, |
| {0x3645, 0x13}, |
| {0x3646, 0x81}, |
| {0x3636, 0x10}, |
| {0x3651, 0x0a}, |
| {0x3656, 0x02}, |
| {0x3659, 0x04}, |
| {0x365a, 0xda}, |
| {0x365b, 0xa2}, |
| {0x365c, 0x04}, |
| {0x365d, 0x1d}, |
| {0x365e, 0x1a}, |
| {0x3662, 0xd7}, |
| {0x3667, 0x78}, |
| {0x3669, 0x0a}, |
| {0x366a, 0x92}, |
| {0x3700, 0x54}, |
| {0x3702, 0x10}, |
| {0x3706, 0x42}, |
| {0x3709, 0x30}, |
| {0x370b, 0xc2}, |
| {0x3714, 0x63}, |
| {0x3715, 0x01}, |
| {0x3716, 0x00}, |
| {0x371a, 0x3e}, |
| {0x3732, 0x0e}, |
| {0x3733, 0x10}, |
| {0x375f, 0x0e}, |
| {0x3768, 0x30}, |
| {0x3769, 0x44}, |
| {0x376a, 0x22}, |
| {0x377b, 0x20}, |
| {0x377c, 0x00}, |
| {0x377d, 0x0c}, |
| {0x3798, 0x00}, |
| {0x37a1, 0x55}, |
| {0x37a8, 0x6d}, |
| {0x37c2, 0x04}, |
| {0x37c5, 0x00}, |
| {0x37c8, 0x00}, |
| {0x3800, 0x00}, |
| {0x3801, 0x00}, |
| {0x3802, 0x00}, |
| {0x3803, 0x00}, |
| {0x3804, 0x07}, |
| {0x3805, 0x8f}, |
| {0x3806, 0x04}, |
| {0x3807, 0x47}, |
| {0x3808, 0x07}, |
| {0x3809, 0x88}, |
| {0x380a, 0x04}, |
| {0x380b, 0x40}, |
| {0x380c, 0x04}, |
| {0x380d, 0x38}, |
| {0x380e, 0x04}, |
| {0x380f, 0x60}, |
| {0x3810, 0x00}, |
| {0x3811, 0x04}, |
| {0x3812, 0x00}, |
| {0x3813, 0x04}, |
| {0x3814, 0x01}, |
| {0x3815, 0x01}, |
| {0x3820, 0x80}, |
| {0x3821, 0x46}, |
| {0x3822, 0x84}, |
| {0x3829, 0x00}, |
| {0x382a, 0x01}, |
| {0x382b, 0x01}, |
| {0x3830, 0x04}, |
| {0x3836, 0x01}, |
| {0x3837, 0x08}, |
| {0x3839, 0x01}, |
| {0x383a, 0x00}, |
| {0x383b, 0x08}, |
| {0x383c, 0x00}, |
| {0x3f0b, 0x00}, |
| {0x4001, 0x20}, |
| {0x4009, 0x07}, |
| {0x4003, 0x10}, |
| {0x4010, 0xe0}, |
| {0x4016, 0x00}, |
| {0x4017, 0x10}, |
| {0x4044, 0x02}, |
| {0x4304, 0x08}, |
| {0x4307, 0x30}, |
| {0x4320, 0x80}, |
| {0x4322, 0x00}, |
| {0x4323, 0x00}, |
| {0x4324, 0x00}, |
| {0x4325, 0x00}, |
| {0x4326, 0x00}, |
| {0x4327, 0x00}, |
| {0x4328, 0x00}, |
| {0x4329, 0x00}, |
| {0x432c, 0x03}, |
| {0x432d, 0x81}, |
| {0x4501, 0x84}, |
| {0x4502, 0x40}, |
| {0x4503, 0x18}, |
| {0x4504, 0x04}, |
| {0x4508, 0x02}, |
| {0x4601, 0x10}, |
| {0x4800, 0x00}, |
| {0x4816, 0x52}, |
| {0x4837, 0x16}, |
| {0x5000, 0x7f}, |
| {0x5001, 0x00}, |
| {0x5005, 0x38}, |
| {0x501e, 0x0d}, |
| {0x5040, 0x00}, |
| {0x5901, 0x00}, |
| {0x3800, 0x00}, |
| {0x3801, 0x00}, |
| {0x3802, 0x00}, |
| {0x3803, 0x00}, |
| {0x3804, 0x07}, |
| {0x3805, 0x8f}, |
| {0x3806, 0x04}, |
| {0x3807, 0x47}, |
| {0x3808, 0x07}, |
| {0x3809, 0x8c}, |
| {0x380a, 0x04}, |
| {0x380b, 0x44}, |
| {0x3810, 0x00}, |
| {0x3811, 0x00}, |
| {0x3812, 0x00}, |
| {0x3813, 0x01}, |
| }; |
| |
| static const char * const ov2740_test_pattern_menu[] = { |
| "Disabled", |
| "Color Bar", |
| "Top-Bottom Darker Color Bar", |
| "Right-Left Darker Color Bar", |
| "Bottom-Top Darker Color Bar", |
| }; |
| |
| static const s64 link_freq_menu_items[] = { |
| OV2740_LINK_FREQ_360MHZ, |
| }; |
| |
| static const struct ov2740_link_freq_config link_freq_configs[] = { |
| [OV2740_LINK_FREQ_360MHZ_INDEX] = { |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mipi_data_rate_720mbps), |
| .regs = mipi_data_rate_720mbps, |
| } |
| }, |
| }; |
| |
| static const struct ov2740_mode supported_modes[] = { |
| { |
| .width = 1932, |
| .height = 1092, |
| .hts = 1080, |
| .vts_def = OV2740_VTS_DEF, |
| .vts_min = OV2740_VTS_MIN, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_1932x1092_regs), |
| .regs = mode_1932x1092_regs, |
| }, |
| .link_freq_index = OV2740_LINK_FREQ_360MHZ_INDEX, |
| }, |
| }; |
| |
| struct ov2740 { |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler ctrl_handler; |
| |
| /* V4L2 Controls */ |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *pixel_rate; |
| struct v4l2_ctrl *vblank; |
| struct v4l2_ctrl *hblank; |
| struct v4l2_ctrl *exposure; |
| |
| /* Current mode */ |
| const struct ov2740_mode *cur_mode; |
| |
| /* To serialize asynchronus callbacks */ |
| struct mutex mutex; |
| |
| /* Streaming on/off */ |
| bool streaming; |
| }; |
| |
| static inline struct ov2740 *to_ov2740(struct v4l2_subdev *subdev) |
| { |
| return container_of(subdev, struct ov2740, sd); |
| } |
| |
| static u64 to_pixel_rate(u32 f_index) |
| { |
| u64 pixel_rate = link_freq_menu_items[f_index] * 2 * OV2740_DATA_LANES; |
| |
| do_div(pixel_rate, OV2740_RGB_DEPTH); |
| |
| return pixel_rate; |
| } |
| |
| static u64 to_pixels_per_line(u32 hts, u32 f_index) |
| { |
| u64 ppl = hts * to_pixel_rate(f_index); |
| |
| do_div(ppl, OV2740_SCLK); |
| |
| return ppl; |
| } |
| |
| static int ov2740_read_reg(struct ov2740 *ov2740, u16 reg, u16 len, u32 *val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); |
| struct i2c_msg msgs[2]; |
| u8 addr_buf[2]; |
| u8 data_buf[4] = {0}; |
| int ret = 0; |
| |
| if (len > sizeof(data_buf)) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, addr_buf); |
| msgs[0].addr = client->addr; |
| msgs[0].flags = 0; |
| msgs[0].len = sizeof(addr_buf); |
| msgs[0].buf = addr_buf; |
| msgs[1].addr = client->addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = len; |
| msgs[1].buf = &data_buf[sizeof(data_buf) - len]; |
| |
| ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret != ARRAY_SIZE(msgs)) |
| return ret < 0 ? ret : -EIO; |
| |
| *val = get_unaligned_be32(data_buf); |
| |
| return 0; |
| } |
| |
| static int ov2740_write_reg(struct ov2740 *ov2740, u16 reg, u16 len, u32 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); |
| u8 buf[6]; |
| int ret = 0; |
| |
| if (len > 4) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, buf); |
| put_unaligned_be32(val << 8 * (4 - len), buf + 2); |
| |
| ret = i2c_master_send(client, buf, len + 2); |
| if (ret != len + 2) |
| return ret < 0 ? ret : -EIO; |
| |
| return 0; |
| } |
| |
| static int ov2740_write_reg_list(struct ov2740 *ov2740, |
| const struct ov2740_reg_list *r_list) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); |
| unsigned int i; |
| int ret = 0; |
| |
| for (i = 0; i < r_list->num_of_regs; i++) { |
| ret = ov2740_write_reg(ov2740, r_list->regs[i].address, 1, |
| r_list->regs[i].val); |
| if (ret) { |
| dev_err_ratelimited(&client->dev, |
| "write reg 0x%4.4x return err = %d", |
| r_list->regs[i].address, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ov2740_update_digital_gain(struct ov2740 *ov2740, u32 d_gain) |
| { |
| int ret = 0; |
| |
| ret = ov2740_write_reg(ov2740, OV2740_REG_MWB_R_GAIN, 2, d_gain); |
| if (ret) |
| return ret; |
| |
| ret = ov2740_write_reg(ov2740, OV2740_REG_MWB_G_GAIN, 2, d_gain); |
| if (ret) |
| return ret; |
| |
| return ov2740_write_reg(ov2740, OV2740_REG_MWB_B_GAIN, 2, d_gain); |
| } |
| |
| static int ov2740_test_pattern(struct ov2740 *ov2740, u32 pattern) |
| { |
| if (pattern) |
| pattern = (pattern - 1) << OV2740_TEST_PATTERN_BAR_SHIFT | |
| OV2740_TEST_PATTERN_ENABLE; |
| |
| return ov2740_write_reg(ov2740, OV2740_REG_TEST_PATTERN, 1, pattern); |
| } |
| |
| static int ov2740_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ov2740 *ov2740 = container_of(ctrl->handler, |
| struct ov2740, ctrl_handler); |
| struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); |
| s64 exposure_max; |
| int ret = 0; |
| |
| /* Propagate change of current control to all related controls */ |
| if (ctrl->id == V4L2_CID_VBLANK) { |
| /* Update max exposure while meeting expected vblanking */ |
| exposure_max = ov2740->cur_mode->height + ctrl->val - |
| OV2740_EXPOSURE_MAX_MARGIN; |
| __v4l2_ctrl_modify_range(ov2740->exposure, |
| ov2740->exposure->minimum, |
| exposure_max, ov2740->exposure->step, |
| exposure_max); |
| } |
| |
| /* V4L2 controls values will be applied only when power is already up */ |
| if (!pm_runtime_get_if_in_use(&client->dev)) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_ANALOGUE_GAIN: |
| ret = ov2740_write_reg(ov2740, OV2740_REG_ANALOG_GAIN, 2, |
| ctrl->val); |
| break; |
| |
| case V4L2_CID_DIGITAL_GAIN: |
| ret = ov2740_update_digital_gain(ov2740, ctrl->val); |
| break; |
| |
| case V4L2_CID_EXPOSURE: |
| /* 4 least significant bits of expsoure are fractional part */ |
| ret = ov2740_write_reg(ov2740, OV2740_REG_EXPOSURE, 3, |
| ctrl->val << 4); |
| break; |
| |
| case V4L2_CID_VBLANK: |
| ret = ov2740_write_reg(ov2740, OV2740_REG_VTS, 2, |
| ov2740->cur_mode->height + ctrl->val); |
| break; |
| |
| case V4L2_CID_TEST_PATTERN: |
| ret = ov2740_test_pattern(ov2740, ctrl->val); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| pm_runtime_put(&client->dev); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops ov2740_ctrl_ops = { |
| .s_ctrl = ov2740_set_ctrl, |
| }; |
| |
| static int ov2740_init_controls(struct ov2740 *ov2740) |
| { |
| struct v4l2_ctrl_handler *ctrl_hdlr; |
| const struct ov2740_mode *cur_mode; |
| s64 exposure_max, h_blank, pixel_rate; |
| u32 vblank_min, vblank_max, vblank_default; |
| int size; |
| int ret = 0; |
| |
| ctrl_hdlr = &ov2740->ctrl_handler; |
| ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8); |
| if (ret) |
| return ret; |
| |
| ctrl_hdlr->lock = &ov2740->mutex; |
| cur_mode = ov2740->cur_mode; |
| size = ARRAY_SIZE(link_freq_menu_items); |
| |
| ov2740->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov2740_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| size - 1, 0, |
| link_freq_menu_items); |
| if (ov2740->link_freq) |
| ov2740->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| pixel_rate = to_pixel_rate(OV2740_LINK_FREQ_360MHZ_INDEX); |
| ov2740->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, 0, |
| pixel_rate, 1, pixel_rate); |
| |
| vblank_min = cur_mode->vts_min - cur_mode->height; |
| vblank_max = OV2740_VTS_MAX - cur_mode->height; |
| vblank_default = cur_mode->vts_def - cur_mode->height; |
| ov2740->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, |
| V4L2_CID_VBLANK, vblank_min, |
| vblank_max, 1, vblank_default); |
| |
| h_blank = to_pixels_per_line(cur_mode->hts, cur_mode->link_freq_index); |
| h_blank -= cur_mode->width; |
| ov2740->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, |
| V4L2_CID_HBLANK, h_blank, h_blank, 1, |
| h_blank); |
| if (ov2740->hblank) |
| ov2740->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, |
| OV2740_ANAL_GAIN_MIN, OV2740_ANAL_GAIN_MAX, |
| OV2740_ANAL_GAIN_STEP, OV2740_ANAL_GAIN_MIN); |
| v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_DIGITAL_GAIN, |
| OV2740_DGTL_GAIN_MIN, OV2740_DGTL_GAIN_MAX, |
| OV2740_DGTL_GAIN_STEP, OV2740_DGTL_GAIN_DEFAULT); |
| exposure_max = cur_mode->vts_def - OV2740_EXPOSURE_MAX_MARGIN; |
| ov2740->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, |
| V4L2_CID_EXPOSURE, |
| OV2740_EXPOSURE_MIN, exposure_max, |
| OV2740_EXPOSURE_STEP, |
| exposure_max); |
| v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov2740_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(ov2740_test_pattern_menu) - 1, |
| 0, 0, ov2740_test_pattern_menu); |
| if (ctrl_hdlr->error) |
| return ctrl_hdlr->error; |
| |
| ov2740->sd.ctrl_handler = ctrl_hdlr; |
| |
| return 0; |
| } |
| |
| static void ov2740_update_pad_format(const struct ov2740_mode *mode, |
| struct v4l2_mbus_framefmt *fmt) |
| { |
| fmt->width = mode->width; |
| fmt->height = mode->height; |
| fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; |
| fmt->field = V4L2_FIELD_NONE; |
| } |
| |
| static int ov2740_start_streaming(struct ov2740 *ov2740) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); |
| const struct ov2740_reg_list *reg_list; |
| int link_freq_index; |
| int ret = 0; |
| |
| link_freq_index = ov2740->cur_mode->link_freq_index; |
| reg_list = &link_freq_configs[link_freq_index].reg_list; |
| ret = ov2740_write_reg_list(ov2740, reg_list); |
| if (ret) { |
| dev_err(&client->dev, "failed to set plls"); |
| return ret; |
| } |
| |
| reg_list = &ov2740->cur_mode->reg_list; |
| ret = ov2740_write_reg_list(ov2740, reg_list); |
| if (ret) { |
| dev_err(&client->dev, "failed to set mode"); |
| return ret; |
| } |
| |
| ret = __v4l2_ctrl_handler_setup(ov2740->sd.ctrl_handler); |
| if (ret) |
| return ret; |
| |
| ret = ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1, |
| OV2740_MODE_STREAMING); |
| if (ret) |
| dev_err(&client->dev, "failed to start streaming"); |
| |
| return ret; |
| } |
| |
| static void ov2740_stop_streaming(struct ov2740 *ov2740) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); |
| |
| if (ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1, |
| OV2740_MODE_STANDBY)) |
| dev_err(&client->dev, "failed to stop streaming"); |
| } |
| |
| static int ov2740_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct ov2740 *ov2740 = to_ov2740(sd); |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret = 0; |
| |
| if (ov2740->streaming == enable) |
| return 0; |
| |
| mutex_lock(&ov2740->mutex); |
| if (enable) { |
| ret = pm_runtime_get_sync(&client->dev); |
| if (ret < 0) { |
| pm_runtime_put_noidle(&client->dev); |
| mutex_unlock(&ov2740->mutex); |
| return ret; |
| } |
| |
| ret = ov2740_start_streaming(ov2740); |
| if (ret) { |
| enable = 0; |
| ov2740_stop_streaming(ov2740); |
| pm_runtime_put(&client->dev); |
| } |
| } else { |
| ov2740_stop_streaming(ov2740); |
| pm_runtime_put(&client->dev); |
| } |
| |
| ov2740->streaming = enable; |
| mutex_unlock(&ov2740->mutex); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused ov2740_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct ov2740 *ov2740 = to_ov2740(sd); |
| |
| mutex_lock(&ov2740->mutex); |
| if (ov2740->streaming) |
| ov2740_stop_streaming(ov2740); |
| |
| mutex_unlock(&ov2740->mutex); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused ov2740_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct ov2740 *ov2740 = to_ov2740(sd); |
| int ret = 0; |
| |
| mutex_lock(&ov2740->mutex); |
| if (!ov2740->streaming) |
| goto exit; |
| |
| ret = ov2740_start_streaming(ov2740); |
| if (ret) { |
| ov2740->streaming = false; |
| ov2740_stop_streaming(ov2740); |
| } |
| |
| exit: |
| mutex_unlock(&ov2740->mutex); |
| return ret; |
| } |
| |
| static int ov2740_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct ov2740 *ov2740 = to_ov2740(sd); |
| const struct ov2740_mode *mode; |
| s32 vblank_def, h_blank; |
| |
| mode = v4l2_find_nearest_size(supported_modes, |
| ARRAY_SIZE(supported_modes), width, |
| height, fmt->format.width, |
| fmt->format.height); |
| |
| mutex_lock(&ov2740->mutex); |
| ov2740_update_pad_format(mode, &fmt->format); |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format; |
| } else { |
| ov2740->cur_mode = mode; |
| __v4l2_ctrl_s_ctrl(ov2740->link_freq, mode->link_freq_index); |
| __v4l2_ctrl_s_ctrl_int64(ov2740->pixel_rate, |
| to_pixel_rate(mode->link_freq_index)); |
| |
| /* Update limits and set FPS to default */ |
| vblank_def = mode->vts_def - mode->height; |
| __v4l2_ctrl_modify_range(ov2740->vblank, |
| mode->vts_min - mode->height, |
| OV2740_VTS_MAX - mode->height, 1, |
| vblank_def); |
| __v4l2_ctrl_s_ctrl(ov2740->vblank, vblank_def); |
| h_blank = to_pixels_per_line(mode->hts, mode->link_freq_index) - |
| mode->width; |
| __v4l2_ctrl_modify_range(ov2740->hblank, h_blank, h_blank, 1, |
| h_blank); |
| } |
| mutex_unlock(&ov2740->mutex); |
| |
| return 0; |
| } |
| |
| static int ov2740_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct ov2740 *ov2740 = to_ov2740(sd); |
| |
| mutex_lock(&ov2740->mutex); |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) |
| fmt->format = *v4l2_subdev_get_try_format(&ov2740->sd, cfg, |
| fmt->pad); |
| else |
| ov2740_update_pad_format(ov2740->cur_mode, &fmt->format); |
| |
| mutex_unlock(&ov2740->mutex); |
| |
| return 0; |
| } |
| |
| static int ov2740_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = MEDIA_BUS_FMT_SGRBG10_1X10; |
| |
| return 0; |
| } |
| |
| static int ov2740_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| if (fse->index >= ARRAY_SIZE(supported_modes)) |
| return -EINVAL; |
| |
| if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10) |
| return -EINVAL; |
| |
| fse->min_width = supported_modes[fse->index].width; |
| fse->max_width = fse->min_width; |
| fse->min_height = supported_modes[fse->index].height; |
| fse->max_height = fse->min_height; |
| |
| return 0; |
| } |
| |
| static int ov2740_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct ov2740 *ov2740 = to_ov2740(sd); |
| |
| mutex_lock(&ov2740->mutex); |
| ov2740_update_pad_format(&supported_modes[0], |
| v4l2_subdev_get_try_format(sd, fh->pad, 0)); |
| mutex_unlock(&ov2740->mutex); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_video_ops ov2740_video_ops = { |
| .s_stream = ov2740_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops ov2740_pad_ops = { |
| .set_fmt = ov2740_set_format, |
| .get_fmt = ov2740_get_format, |
| .enum_mbus_code = ov2740_enum_mbus_code, |
| .enum_frame_size = ov2740_enum_frame_size, |
| }; |
| |
| static const struct v4l2_subdev_ops ov2740_subdev_ops = { |
| .video = &ov2740_video_ops, |
| .pad = &ov2740_pad_ops, |
| }; |
| |
| static const struct media_entity_operations ov2740_subdev_entity_ops = { |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops ov2740_internal_ops = { |
| .open = ov2740_open, |
| }; |
| |
| static int ov2740_identify_module(struct ov2740 *ov2740) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); |
| int ret; |
| u32 val; |
| |
| ret = ov2740_read_reg(ov2740, OV2740_REG_CHIP_ID, 3, &val); |
| if (ret) |
| return ret; |
| |
| if (val != OV2740_CHIP_ID) { |
| dev_err(&client->dev, "chip id mismatch: %x!=%x", |
| OV2740_CHIP_ID, val); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static int ov2740_check_hwcfg(struct device *dev) |
| { |
| struct fwnode_handle *ep; |
| struct fwnode_handle *fwnode = dev_fwnode(dev); |
| struct v4l2_fwnode_endpoint bus_cfg = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY |
| }; |
| u32 mclk; |
| int ret; |
| unsigned int i, j; |
| |
| if (!fwnode) |
| return -ENXIO; |
| |
| ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk); |
| if (ret) |
| return ret; |
| |
| if (mclk != OV2740_MCLK) { |
| dev_err(dev, "external clock %d is not supported", mclk); |
| return -EINVAL; |
| } |
| |
| ep = fwnode_graph_get_next_endpoint(fwnode, NULL); |
| if (!ep) |
| return -ENXIO; |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); |
| fwnode_handle_put(ep); |
| if (ret) |
| return ret; |
| |
| if (bus_cfg.bus.mipi_csi2.num_data_lanes != OV2740_DATA_LANES) { |
| dev_err(dev, "number of CSI2 data lanes %d is not supported", |
| bus_cfg.bus.mipi_csi2.num_data_lanes); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| |
| if (!bus_cfg.nr_of_link_frequencies) { |
| dev_err(dev, "no link frequencies defined"); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) { |
| for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) { |
| if (link_freq_menu_items[i] == |
| bus_cfg.link_frequencies[j]) |
| break; |
| } |
| |
| if (j == bus_cfg.nr_of_link_frequencies) { |
| dev_err(dev, "no link frequency %lld supported", |
| link_freq_menu_items[i]); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| } |
| |
| check_hwcfg_error: |
| v4l2_fwnode_endpoint_free(&bus_cfg); |
| |
| return ret; |
| } |
| |
| static int ov2740_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct ov2740 *ov2740 = to_ov2740(sd); |
| |
| v4l2_async_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| pm_runtime_disable(&client->dev); |
| mutex_destroy(&ov2740->mutex); |
| |
| return 0; |
| } |
| |
| static int ov2740_load_otp_data(struct i2c_client *client, struct nvm_data *nvm) |
| { |
| struct ov2740 *ov2740 = to_ov2740(i2c_get_clientdata(client)); |
| u32 isp_ctrl00 = 0; |
| u32 isp_ctrl01 = 0; |
| int ret; |
| |
| ret = ov2740_read_reg(ov2740, OV2740_REG_ISP_CTRL00, 1, &isp_ctrl00); |
| if (ret) { |
| dev_err(&client->dev, "failed to read ISP CTRL00\n"); |
| goto exit; |
| } |
| ret = ov2740_read_reg(ov2740, OV2740_REG_ISP_CTRL01, 1, &isp_ctrl01); |
| if (ret) { |
| dev_err(&client->dev, "failed to read ISP CTRL01\n"); |
| goto exit; |
| } |
| |
| /* Clear bit 5 of ISP CTRL00 */ |
| ret = ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL00, 1, |
| isp_ctrl00 & ~BIT(5)); |
| if (ret) { |
| dev_err(&client->dev, "failed to write ISP CTRL00\n"); |
| goto exit; |
| } |
| |
| /* Clear bit 7 of ISP CTRL01 */ |
| ret = ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL01, 1, |
| isp_ctrl01 & ~BIT(7)); |
| if (ret) { |
| dev_err(&client->dev, "failed to write ISP CTRL01\n"); |
| goto exit; |
| } |
| |
| ret = ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1, |
| OV2740_MODE_STREAMING); |
| if (ret) { |
| dev_err(&client->dev, "failed to start streaming\n"); |
| goto exit; |
| } |
| |
| /* |
| * Users are not allowed to access OTP-related registers and memory |
| * during the 20 ms period after streaming starts (0x100 = 0x01). |
| */ |
| msleep(20); |
| |
| ret = regmap_bulk_read(nvm->regmap, OV2740_REG_OTP_CUSTOMER, |
| nvm->nvm_buffer, CUSTOMER_USE_OTP_SIZE); |
| if (ret) { |
| dev_err(&client->dev, "failed to read OTP data, ret %d\n", ret); |
| goto exit; |
| } |
| |
| ov2740_write_reg(ov2740, OV2740_REG_MODE_SELECT, 1, |
| OV2740_MODE_STANDBY); |
| ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL01, 1, isp_ctrl01); |
| ov2740_write_reg(ov2740, OV2740_REG_ISP_CTRL00, 1, isp_ctrl00); |
| |
| exit: |
| return ret; |
| } |
| |
| static int ov2740_nvmem_read(void *priv, unsigned int off, void *val, |
| size_t count) |
| { |
| struct nvm_data *nvm = priv; |
| |
| memcpy(val, nvm->nvm_buffer + off, count); |
| |
| return 0; |
| } |
| |
| static int ov2740_register_nvmem(struct i2c_client *client) |
| { |
| struct nvm_data *nvm; |
| struct regmap_config regmap_config = { }; |
| struct nvmem_config nvmem_config = { }; |
| struct regmap *regmap; |
| struct device *dev = &client->dev; |
| int ret = 0; |
| |
| nvm = devm_kzalloc(dev, sizeof(*nvm), GFP_KERNEL); |
| if (!nvm) |
| return -ENOMEM; |
| |
| regmap_config.val_bits = 8; |
| regmap_config.reg_bits = 16; |
| regmap_config.disable_locking = true; |
| regmap = devm_regmap_init_i2c(client, ®map_config); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| nvm->regmap = regmap; |
| |
| nvmem_config.name = dev_name(dev); |
| nvmem_config.dev = dev; |
| nvmem_config.read_only = true; |
| nvmem_config.root_only = true; |
| nvmem_config.owner = THIS_MODULE; |
| nvmem_config.compat = true; |
| nvmem_config.base_dev = dev; |
| nvmem_config.reg_read = ov2740_nvmem_read; |
| nvmem_config.reg_write = NULL; |
| nvmem_config.priv = nvm; |
| nvmem_config.stride = 1; |
| nvmem_config.word_size = 1; |
| nvmem_config.size = CUSTOMER_USE_OTP_SIZE; |
| |
| nvm->nvmem = devm_nvmem_register(dev, &nvmem_config); |
| if (IS_ERR(nvm->nvmem)) |
| return PTR_ERR(nvm->nvmem); |
| |
| nvm->nvm_buffer = devm_kzalloc(dev, CUSTOMER_USE_OTP_SIZE, GFP_KERNEL); |
| if (!nvm->nvm_buffer) |
| return -ENOMEM; |
| |
| ret = ov2740_load_otp_data(client, nvm); |
| if (ret) |
| dev_err(dev, "failed to load OTP data, ret %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int ov2740_probe(struct i2c_client *client) |
| { |
| struct ov2740 *ov2740; |
| int ret = 0; |
| |
| ret = ov2740_check_hwcfg(&client->dev); |
| if (ret) { |
| dev_err(&client->dev, "failed to check HW configuration: %d", |
| ret); |
| return ret; |
| } |
| |
| ov2740 = devm_kzalloc(&client->dev, sizeof(*ov2740), GFP_KERNEL); |
| if (!ov2740) |
| return -ENOMEM; |
| |
| v4l2_i2c_subdev_init(&ov2740->sd, client, &ov2740_subdev_ops); |
| ret = ov2740_identify_module(ov2740); |
| if (ret) { |
| dev_err(&client->dev, "failed to find sensor: %d", ret); |
| return ret; |
| } |
| |
| mutex_init(&ov2740->mutex); |
| ov2740->cur_mode = &supported_modes[0]; |
| ret = ov2740_init_controls(ov2740); |
| if (ret) { |
| dev_err(&client->dev, "failed to init controls: %d", ret); |
| goto probe_error_v4l2_ctrl_handler_free; |
| } |
| |
| ov2740->sd.internal_ops = &ov2740_internal_ops; |
| ov2740->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| ov2740->sd.entity.ops = &ov2740_subdev_entity_ops; |
| ov2740->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| ov2740->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ret = media_entity_pads_init(&ov2740->sd.entity, 1, &ov2740->pad); |
| if (ret) { |
| dev_err(&client->dev, "failed to init entity pads: %d", ret); |
| goto probe_error_v4l2_ctrl_handler_free; |
| } |
| |
| ret = v4l2_async_register_subdev_sensor_common(&ov2740->sd); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to register V4L2 subdev: %d", |
| ret); |
| goto probe_error_media_entity_cleanup; |
| } |
| |
| ret = ov2740_register_nvmem(client); |
| if (ret) |
| dev_err(&client->dev, "register nvmem failed, ret %d\n", ret); |
| |
| /* |
| * Device is already turned on by i2c-core with ACPI domain PM. |
| * Enable runtime PM and turn off the device. |
| */ |
| pm_runtime_set_active(&client->dev); |
| pm_runtime_enable(&client->dev); |
| pm_runtime_idle(&client->dev); |
| |
| return 0; |
| |
| probe_error_media_entity_cleanup: |
| media_entity_cleanup(&ov2740->sd.entity); |
| |
| probe_error_v4l2_ctrl_handler_free: |
| v4l2_ctrl_handler_free(ov2740->sd.ctrl_handler); |
| mutex_destroy(&ov2740->mutex); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops ov2740_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(ov2740_suspend, ov2740_resume) |
| }; |
| |
| static const struct acpi_device_id ov2740_acpi_ids[] = { |
| {"INT3474"}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(acpi, ov2740_acpi_ids); |
| |
| static struct i2c_driver ov2740_i2c_driver = { |
| .driver = { |
| .name = "ov2740", |
| .pm = &ov2740_pm_ops, |
| .acpi_match_table = ov2740_acpi_ids, |
| }, |
| .probe_new = ov2740_probe, |
| .remove = ov2740_remove, |
| }; |
| |
| module_i2c_driver(ov2740_i2c_driver); |
| |
| MODULE_AUTHOR("Qiu, Tianshu <tian.shu.qiu@intel.com>"); |
| MODULE_AUTHOR("Shawn Tu <shawnx.tu@intel.com>"); |
| MODULE_AUTHOR("Bingbu Cao <bingbu.cao@intel.com>"); |
| MODULE_DESCRIPTION("OmniVision OV2740 sensor driver"); |
| MODULE_LICENSE("GPL v2"); |