| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * This file is based on code from OCTEON SDK by Cavium Networks. |
| * |
| * Copyright (c) 2003-2010 Cavium Networks |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/cache.h> |
| #include <linux/cpumask.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ip.h> |
| #include <linux/string.h> |
| #include <linux/prefetch.h> |
| #include <linux/ratelimit.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <net/dst.h> |
| #ifdef CONFIG_XFRM |
| #include <linux/xfrm.h> |
| #include <net/xfrm.h> |
| #endif /* CONFIG_XFRM */ |
| |
| #include "octeon-ethernet.h" |
| #include "ethernet-defines.h" |
| #include "ethernet-mem.h" |
| #include "ethernet-rx.h" |
| #include "ethernet-util.h" |
| |
| static atomic_t oct_rx_ready = ATOMIC_INIT(0); |
| |
| static struct oct_rx_group { |
| int irq; |
| int group; |
| struct napi_struct napi; |
| } oct_rx_group[16]; |
| |
| /** |
| * cvm_oct_do_interrupt - interrupt handler. |
| * @irq: Interrupt number. |
| * @napi_id: Cookie to identify the NAPI instance. |
| * |
| * The interrupt occurs whenever the POW has packets in our group. |
| * |
| */ |
| static irqreturn_t cvm_oct_do_interrupt(int irq, void *napi_id) |
| { |
| /* Disable the IRQ and start napi_poll. */ |
| disable_irq_nosync(irq); |
| napi_schedule(napi_id); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * cvm_oct_check_rcv_error - process receive errors |
| * @work: Work queue entry pointing to the packet. |
| * |
| * Returns Non-zero if the packet can be dropped, zero otherwise. |
| */ |
| static inline int cvm_oct_check_rcv_error(struct cvmx_wqe *work) |
| { |
| int port; |
| |
| if (octeon_has_feature(OCTEON_FEATURE_PKND)) |
| port = work->word0.pip.cn68xx.pknd; |
| else |
| port = work->word1.cn38xx.ipprt; |
| |
| if ((work->word2.snoip.err_code == 10) && (work->word1.len <= 64)) { |
| /* |
| * Ignore length errors on min size packets. Some |
| * equipment incorrectly pads packets to 64+4FCS |
| * instead of 60+4FCS. Note these packets still get |
| * counted as frame errors. |
| */ |
| } else if (work->word2.snoip.err_code == 5 || |
| work->word2.snoip.err_code == 7) { |
| /* |
| * We received a packet with either an alignment error |
| * or a FCS error. This may be signalling that we are |
| * running 10Mbps with GMXX_RXX_FRM_CTL[PRE_CHK] |
| * off. If this is the case we need to parse the |
| * packet to determine if we can remove a non spec |
| * preamble and generate a correct packet. |
| */ |
| int interface = cvmx_helper_get_interface_num(port); |
| int index = cvmx_helper_get_interface_index_num(port); |
| union cvmx_gmxx_rxx_frm_ctl gmxx_rxx_frm_ctl; |
| |
| gmxx_rxx_frm_ctl.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface)); |
| if (gmxx_rxx_frm_ctl.s.pre_chk == 0) { |
| u8 *ptr = |
| cvmx_phys_to_ptr(work->packet_ptr.s.addr); |
| int i = 0; |
| |
| while (i < work->word1.len - 1) { |
| if (*ptr != 0x55) |
| break; |
| ptr++; |
| i++; |
| } |
| |
| if (*ptr == 0xd5) { |
| /* Port received 0xd5 preamble */ |
| work->packet_ptr.s.addr += i + 1; |
| work->word1.len -= i + 5; |
| } else if ((*ptr & 0xf) == 0xd) { |
| /* Port received 0xd preamble */ |
| work->packet_ptr.s.addr += i; |
| work->word1.len -= i + 4; |
| for (i = 0; i < work->word1.len; i++) { |
| *ptr = |
| ((*ptr & 0xf0) >> 4) | |
| ((*(ptr + 1) & 0xf) << 4); |
| ptr++; |
| } |
| } else { |
| printk_ratelimited("Port %d unknown preamble, packet dropped\n", |
| port); |
| cvm_oct_free_work(work); |
| return 1; |
| } |
| } |
| } else { |
| printk_ratelimited("Port %d receive error code %d, packet dropped\n", |
| port, work->word2.snoip.err_code); |
| cvm_oct_free_work(work); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void copy_segments_to_skb(struct cvmx_wqe *work, struct sk_buff *skb) |
| { |
| int segments = work->word2.s.bufs; |
| union cvmx_buf_ptr segment_ptr = work->packet_ptr; |
| int len = work->word1.len; |
| int segment_size; |
| |
| while (segments--) { |
| union cvmx_buf_ptr next_ptr; |
| |
| next_ptr = *(union cvmx_buf_ptr *) |
| cvmx_phys_to_ptr(segment_ptr.s.addr - 8); |
| |
| /* |
| * Octeon Errata PKI-100: The segment size is wrong. |
| * |
| * Until it is fixed, calculate the segment size based on |
| * the packet pool buffer size. |
| * When it is fixed, the following line should be replaced |
| * with this one: |
| * int segment_size = segment_ptr.s.size; |
| */ |
| segment_size = |
| CVMX_FPA_PACKET_POOL_SIZE - |
| (segment_ptr.s.addr - |
| (((segment_ptr.s.addr >> 7) - |
| segment_ptr.s.back) << 7)); |
| |
| /* Don't copy more than what is left in the packet */ |
| if (segment_size > len) |
| segment_size = len; |
| |
| /* Copy the data into the packet */ |
| skb_put_data(skb, cvmx_phys_to_ptr(segment_ptr.s.addr), |
| segment_size); |
| len -= segment_size; |
| segment_ptr = next_ptr; |
| } |
| } |
| |
| static int cvm_oct_poll(struct oct_rx_group *rx_group, int budget) |
| { |
| const int coreid = cvmx_get_core_num(); |
| u64 old_group_mask; |
| u64 old_scratch; |
| int rx_count = 0; |
| int did_work_request = 0; |
| int packet_not_copied; |
| |
| /* Prefetch cvm_oct_device since we know we need it soon */ |
| prefetch(cvm_oct_device); |
| |
| if (USE_ASYNC_IOBDMA) { |
| /* Save scratch in case userspace is using it */ |
| CVMX_SYNCIOBDMA; |
| old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH); |
| } |
| |
| /* Only allow work for our group (and preserve priorities) */ |
| if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { |
| old_group_mask = cvmx_read_csr(CVMX_SSO_PPX_GRP_MSK(coreid)); |
| cvmx_write_csr(CVMX_SSO_PPX_GRP_MSK(coreid), |
| BIT(rx_group->group)); |
| cvmx_read_csr(CVMX_SSO_PPX_GRP_MSK(coreid)); /* Flush */ |
| } else { |
| old_group_mask = cvmx_read_csr(CVMX_POW_PP_GRP_MSKX(coreid)); |
| cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), |
| (old_group_mask & ~0xFFFFull) | |
| BIT(rx_group->group)); |
| } |
| |
| if (USE_ASYNC_IOBDMA) { |
| cvmx_pow_work_request_async(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT); |
| did_work_request = 1; |
| } |
| |
| while (rx_count < budget) { |
| struct sk_buff *skb = NULL; |
| struct sk_buff **pskb = NULL; |
| int skb_in_hw; |
| struct cvmx_wqe *work; |
| int port; |
| |
| if (USE_ASYNC_IOBDMA && did_work_request) |
| work = cvmx_pow_work_response_async(CVMX_SCR_SCRATCH); |
| else |
| work = cvmx_pow_work_request_sync(CVMX_POW_NO_WAIT); |
| |
| prefetch(work); |
| did_work_request = 0; |
| if (!work) { |
| if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { |
| cvmx_write_csr(CVMX_SSO_WQ_IQ_DIS, |
| BIT(rx_group->group)); |
| cvmx_write_csr(CVMX_SSO_WQ_INT, |
| BIT(rx_group->group)); |
| } else { |
| union cvmx_pow_wq_int wq_int; |
| |
| wq_int.u64 = 0; |
| wq_int.s.iq_dis = BIT(rx_group->group); |
| wq_int.s.wq_int = BIT(rx_group->group); |
| cvmx_write_csr(CVMX_POW_WQ_INT, wq_int.u64); |
| } |
| break; |
| } |
| pskb = (struct sk_buff **) |
| (cvm_oct_get_buffer_ptr(work->packet_ptr) - |
| sizeof(void *)); |
| prefetch(pskb); |
| |
| if (USE_ASYNC_IOBDMA && rx_count < (budget - 1)) { |
| cvmx_pow_work_request_async_nocheck(CVMX_SCR_SCRATCH, |
| CVMX_POW_NO_WAIT); |
| did_work_request = 1; |
| } |
| rx_count++; |
| |
| skb_in_hw = work->word2.s.bufs == 1; |
| if (likely(skb_in_hw)) { |
| skb = *pskb; |
| prefetch(&skb->head); |
| prefetch(&skb->len); |
| } |
| |
| if (octeon_has_feature(OCTEON_FEATURE_PKND)) |
| port = work->word0.pip.cn68xx.pknd; |
| else |
| port = work->word1.cn38xx.ipprt; |
| |
| prefetch(cvm_oct_device[port]); |
| |
| /* Immediately throw away all packets with receive errors */ |
| if (unlikely(work->word2.snoip.rcv_error)) { |
| if (cvm_oct_check_rcv_error(work)) |
| continue; |
| } |
| |
| /* |
| * We can only use the zero copy path if skbuffs are |
| * in the FPA pool and the packet fits in a single |
| * buffer. |
| */ |
| if (likely(skb_in_hw)) { |
| skb->data = skb->head + work->packet_ptr.s.addr - |
| cvmx_ptr_to_phys(skb->head); |
| prefetch(skb->data); |
| skb->len = work->word1.len; |
| skb_set_tail_pointer(skb, skb->len); |
| packet_not_copied = 1; |
| } else { |
| /* |
| * We have to copy the packet. First allocate |
| * an skbuff for it. |
| */ |
| skb = dev_alloc_skb(work->word1.len); |
| if (!skb) { |
| cvm_oct_free_work(work); |
| continue; |
| } |
| |
| /* |
| * Check if we've received a packet that was |
| * entirely stored in the work entry. |
| */ |
| if (unlikely(work->word2.s.bufs == 0)) { |
| u8 *ptr = work->packet_data; |
| |
| if (likely(!work->word2.s.not_IP)) { |
| /* |
| * The beginning of the packet |
| * moves for IP packets. |
| */ |
| if (work->word2.s.is_v6) |
| ptr += 2; |
| else |
| ptr += 6; |
| } |
| skb_put_data(skb, ptr, work->word1.len); |
| /* No packet buffers to free */ |
| } else { |
| copy_segments_to_skb(work, skb); |
| } |
| packet_not_copied = 0; |
| } |
| if (likely((port < TOTAL_NUMBER_OF_PORTS) && |
| cvm_oct_device[port])) { |
| struct net_device *dev = cvm_oct_device[port]; |
| |
| /* |
| * Only accept packets for devices that are |
| * currently up. |
| */ |
| if (likely(dev->flags & IFF_UP)) { |
| skb->protocol = eth_type_trans(skb, dev); |
| skb->dev = dev; |
| |
| if (unlikely(work->word2.s.not_IP || |
| work->word2.s.IP_exc || |
| work->word2.s.L4_error || |
| !work->word2.s.tcp_or_udp)) |
| skb->ip_summed = CHECKSUM_NONE; |
| else |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| |
| /* Increment RX stats for virtual ports */ |
| if (port >= CVMX_PIP_NUM_INPUT_PORTS) { |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += skb->len; |
| } |
| netif_receive_skb(skb); |
| } else { |
| /* |
| * Drop any packet received for a device that |
| * isn't up. |
| */ |
| dev->stats.rx_dropped++; |
| dev_kfree_skb_irq(skb); |
| } |
| } else { |
| /* |
| * Drop any packet received for a device that |
| * doesn't exist. |
| */ |
| printk_ratelimited("Port %d not controlled by Linux, packet dropped\n", |
| port); |
| dev_kfree_skb_irq(skb); |
| } |
| /* |
| * Check to see if the skbuff and work share the same |
| * packet buffer. |
| */ |
| if (likely(packet_not_copied)) { |
| /* |
| * This buffer needs to be replaced, increment |
| * the number of buffers we need to free by |
| * one. |
| */ |
| cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, |
| 1); |
| |
| cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, 1); |
| } else { |
| cvm_oct_free_work(work); |
| } |
| } |
| /* Restore the original POW group mask */ |
| if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { |
| cvmx_write_csr(CVMX_SSO_PPX_GRP_MSK(coreid), old_group_mask); |
| cvmx_read_csr(CVMX_SSO_PPX_GRP_MSK(coreid)); /* Flush */ |
| } else { |
| cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), old_group_mask); |
| } |
| |
| if (USE_ASYNC_IOBDMA) { |
| /* Restore the scratch area */ |
| cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch); |
| } |
| cvm_oct_rx_refill_pool(0); |
| |
| return rx_count; |
| } |
| |
| /** |
| * cvm_oct_napi_poll - the NAPI poll function. |
| * @napi: The NAPI instance. |
| * @budget: Maximum number of packets to receive. |
| * |
| * Returns the number of packets processed. |
| */ |
| static int cvm_oct_napi_poll(struct napi_struct *napi, int budget) |
| { |
| struct oct_rx_group *rx_group = container_of(napi, struct oct_rx_group, |
| napi); |
| int rx_count; |
| |
| rx_count = cvm_oct_poll(rx_group, budget); |
| |
| if (rx_count < budget) { |
| /* No more work */ |
| napi_complete_done(napi, rx_count); |
| enable_irq(rx_group->irq); |
| } |
| return rx_count; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /** |
| * cvm_oct_poll_controller - poll for receive packets |
| * device. |
| * |
| * @dev: Device to poll. Unused |
| */ |
| void cvm_oct_poll_controller(struct net_device *dev) |
| { |
| int i; |
| |
| if (!atomic_read(&oct_rx_ready)) |
| return; |
| |
| for (i = 0; i < ARRAY_SIZE(oct_rx_group); i++) { |
| if (!(pow_receive_groups & BIT(i))) |
| continue; |
| |
| cvm_oct_poll(&oct_rx_group[i], 16); |
| } |
| } |
| #endif |
| |
| void cvm_oct_rx_initialize(void) |
| { |
| int i; |
| struct net_device *dev_for_napi = NULL; |
| |
| for (i = 0; i < TOTAL_NUMBER_OF_PORTS; i++) { |
| if (cvm_oct_device[i]) { |
| dev_for_napi = cvm_oct_device[i]; |
| break; |
| } |
| } |
| |
| if (!dev_for_napi) |
| panic("No net_devices were allocated."); |
| |
| for (i = 0; i < ARRAY_SIZE(oct_rx_group); i++) { |
| int ret; |
| |
| if (!(pow_receive_groups & BIT(i))) |
| continue; |
| |
| netif_napi_add(dev_for_napi, &oct_rx_group[i].napi, |
| cvm_oct_napi_poll, rx_napi_weight); |
| napi_enable(&oct_rx_group[i].napi); |
| |
| oct_rx_group[i].irq = OCTEON_IRQ_WORKQ0 + i; |
| oct_rx_group[i].group = i; |
| |
| /* Register an IRQ handler to receive POW interrupts */ |
| ret = request_irq(oct_rx_group[i].irq, cvm_oct_do_interrupt, 0, |
| "Ethernet", &oct_rx_group[i].napi); |
| if (ret) |
| panic("Could not acquire Ethernet IRQ %d\n", |
| oct_rx_group[i].irq); |
| |
| disable_irq_nosync(oct_rx_group[i].irq); |
| |
| /* Enable POW interrupt when our port has at least one packet */ |
| if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { |
| union cvmx_sso_wq_int_thrx int_thr; |
| union cvmx_pow_wq_int_pc int_pc; |
| |
| int_thr.u64 = 0; |
| int_thr.s.tc_en = 1; |
| int_thr.s.tc_thr = 1; |
| cvmx_write_csr(CVMX_SSO_WQ_INT_THRX(i), int_thr.u64); |
| |
| int_pc.u64 = 0; |
| int_pc.s.pc_thr = 5; |
| cvmx_write_csr(CVMX_SSO_WQ_INT_PC, int_pc.u64); |
| } else { |
| union cvmx_pow_wq_int_thrx int_thr; |
| union cvmx_pow_wq_int_pc int_pc; |
| |
| int_thr.u64 = 0; |
| int_thr.s.tc_en = 1; |
| int_thr.s.tc_thr = 1; |
| cvmx_write_csr(CVMX_POW_WQ_INT_THRX(i), int_thr.u64); |
| |
| int_pc.u64 = 0; |
| int_pc.s.pc_thr = 5; |
| cvmx_write_csr(CVMX_POW_WQ_INT_PC, int_pc.u64); |
| } |
| |
| /* Schedule NAPI now. This will indirectly enable the |
| * interrupt. |
| */ |
| napi_schedule(&oct_rx_group[i].napi); |
| } |
| atomic_inc(&oct_rx_ready); |
| } |
| |
| void cvm_oct_rx_shutdown(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(oct_rx_group); i++) { |
| if (!(pow_receive_groups & BIT(i))) |
| continue; |
| |
| /* Disable POW interrupt */ |
| if (OCTEON_IS_MODEL(OCTEON_CN68XX)) |
| cvmx_write_csr(CVMX_SSO_WQ_INT_THRX(i), 0); |
| else |
| cvmx_write_csr(CVMX_POW_WQ_INT_THRX(i), 0); |
| |
| /* Free the interrupt handler */ |
| free_irq(oct_rx_group[i].irq, cvm_oct_device); |
| |
| netif_napi_del(&oct_rx_group[i].napi); |
| } |
| } |