| #ifndef _ASM_X86_MACH_DEFAULT_MACH_APIC_H |
| #define _ASM_X86_MACH_DEFAULT_MACH_APIC_H |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| |
| #include <mach_apicdef.h> |
| #include <asm/smp.h> |
| |
| #define APIC_DFR_VALUE (APIC_DFR_FLAT) |
| |
| static inline const struct cpumask *default_target_cpus(void) |
| { |
| #ifdef CONFIG_SMP |
| return cpu_online_mask; |
| #else |
| return cpumask_of(0); |
| #endif |
| } |
| |
| #ifdef CONFIG_X86_64 |
| #include <asm/genapic.h> |
| #define read_apic_id() (apic->get_apic_id(apic_read(APIC_ID))) |
| #define wakeup_secondary_cpu (apic->wakeup_cpu) |
| extern void default_setup_apic_routing(void); |
| #else |
| #define wakeup_secondary_cpu wakeup_secondary_cpu_via_init |
| /* |
| * Set up the logical destination ID. |
| * |
| * Intel recommends to set DFR, LDR and TPR before enabling |
| * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel |
| * document number 292116). So here it goes... |
| */ |
| static inline void default_init_apic_ldr(void) |
| { |
| unsigned long val; |
| |
| apic_write(APIC_DFR, APIC_DFR_VALUE); |
| val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; |
| val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id()); |
| apic_write(APIC_LDR, val); |
| } |
| |
| static inline int default_apic_id_registered(void) |
| { |
| return physid_isset(read_apic_id(), phys_cpu_present_map); |
| } |
| |
| static inline unsigned int |
| default_cpu_mask_to_apicid(const struct cpumask *cpumask) |
| { |
| return cpumask_bits(cpumask)[0]; |
| } |
| |
| static inline unsigned int |
| default_cpu_mask_to_apicid_and(const struct cpumask *cpumask, |
| const struct cpumask *andmask) |
| { |
| unsigned long mask1 = cpumask_bits(cpumask)[0]; |
| unsigned long mask2 = cpumask_bits(andmask)[0]; |
| unsigned long mask3 = cpumask_bits(cpu_online_mask)[0]; |
| |
| return (unsigned int)(mask1 & mask2 & mask3); |
| } |
| |
| static inline int default_phys_pkg_id(int cpuid_apic, int index_msb) |
| { |
| return cpuid_apic >> index_msb; |
| } |
| |
| static inline void default_setup_apic_routing(void) |
| { |
| #ifdef CONFIG_X86_IO_APIC |
| printk("Enabling APIC mode: %s. Using %d I/O APICs\n", |
| "Flat", nr_ioapics); |
| #endif |
| } |
| |
| static inline int default_apicid_to_node(int logical_apicid) |
| { |
| #ifdef CONFIG_SMP |
| return apicid_2_node[hard_smp_processor_id()]; |
| #else |
| return 0; |
| #endif |
| } |
| |
| #endif |
| |
| static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid) |
| { |
| return physid_isset(apicid, bitmap); |
| } |
| |
| static inline unsigned long default_check_apicid_present(int bit) |
| { |
| return physid_isset(bit, phys_cpu_present_map); |
| } |
| |
| static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map) |
| { |
| return phys_map; |
| } |
| |
| /* Mapping from cpu number to logical apicid */ |
| static inline int default_cpu_to_logical_apicid(int cpu) |
| { |
| return 1 << cpu; |
| } |
| |
| static inline int __default_cpu_present_to_apicid(int mps_cpu) |
| { |
| if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu)) |
| return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); |
| else |
| return BAD_APICID; |
| } |
| |
| static inline int |
| __default_check_phys_apicid_present(int boot_cpu_physical_apicid) |
| { |
| return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| static inline int default_cpu_present_to_apicid(int mps_cpu) |
| { |
| return __default_cpu_present_to_apicid(mps_cpu); |
| } |
| |
| static inline int |
| default_check_phys_apicid_present(int boot_cpu_physical_apicid) |
| { |
| return __default_check_phys_apicid_present(boot_cpu_physical_apicid); |
| } |
| #else |
| extern int default_cpu_present_to_apicid(int mps_cpu); |
| extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid); |
| #endif |
| |
| static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid) |
| { |
| return physid_mask_of_physid(phys_apicid); |
| } |
| |
| #endif /* CONFIG_X86_LOCAL_APIC */ |
| #endif /* _ASM_X86_MACH_DEFAULT_MACH_APIC_H */ |