| /********************************************************************* |
| * Author: Cavium Networks |
| * |
| * Contact: support@caviumnetworks.com |
| * This file is part of the OCTEON SDK |
| * |
| * Copyright (c) 2003-2007 Cavium Networks |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this file; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * or visit http://www.gnu.org/licenses/. |
| * |
| * This file may also be available under a different license from Cavium. |
| * Contact Cavium Networks for more information |
| **********************************************************************/ |
| #include <linux/kernel.h> |
| #include <linux/netdevice.h> |
| #include <linux/interrupt.h> |
| #include <linux/phy.h> |
| #include <linux/ratelimit.h> |
| #include <net/dst.h> |
| |
| #include <asm/octeon/octeon.h> |
| |
| #include "ethernet-defines.h" |
| #include "octeon-ethernet.h" |
| #include "ethernet-util.h" |
| |
| #include <asm/octeon/cvmx-helper.h> |
| |
| #include <asm/octeon/cvmx-ipd-defs.h> |
| #include <asm/octeon/cvmx-npi-defs.h> |
| #include <asm/octeon/cvmx-gmxx-defs.h> |
| |
| DEFINE_SPINLOCK(global_register_lock); |
| |
| static int number_rgmii_ports; |
| |
| static void cvm_oct_rgmii_poll(struct net_device *dev) |
| { |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| unsigned long flags = 0; |
| cvmx_helper_link_info_t link_info; |
| int use_global_register_lock = (priv->phydev == NULL); |
| |
| BUG_ON(in_interrupt()); |
| if (use_global_register_lock) { |
| /* |
| * Take the global register lock since we are going to |
| * touch registers that affect more than one port. |
| */ |
| spin_lock_irqsave(&global_register_lock, flags); |
| } else { |
| mutex_lock(&priv->phydev->bus->mdio_lock); |
| } |
| |
| link_info = cvmx_helper_link_get(priv->port); |
| if (link_info.u64 == priv->link_info) { |
| |
| /* |
| * If the 10Mbps preamble workaround is supported and we're |
| * at 10Mbps we may need to do some special checking. |
| */ |
| if (USE_10MBPS_PREAMBLE_WORKAROUND && (link_info.s.speed == 10)) { |
| |
| /* |
| * Read the GMXX_RXX_INT_REG[PCTERR] bit and |
| * see if we are getting preamble errors. |
| */ |
| int interface = INTERFACE(priv->port); |
| int index = INDEX(priv->port); |
| union cvmx_gmxx_rxx_int_reg gmxx_rxx_int_reg; |
| gmxx_rxx_int_reg.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_REG |
| (index, interface)); |
| if (gmxx_rxx_int_reg.s.pcterr) { |
| |
| /* |
| * We are getting preamble errors at |
| * 10Mbps. Most likely the PHY is |
| * giving us packets with mis aligned |
| * preambles. In order to get these |
| * packets we need to disable preamble |
| * checking and do it in software. |
| */ |
| union cvmx_gmxx_rxx_frm_ctl gmxx_rxx_frm_ctl; |
| union cvmx_ipd_sub_port_fcs ipd_sub_port_fcs; |
| |
| /* Disable preamble checking */ |
| gmxx_rxx_frm_ctl.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL |
| (index, interface)); |
| gmxx_rxx_frm_ctl.s.pre_chk = 0; |
| cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL |
| (index, interface), |
| gmxx_rxx_frm_ctl.u64); |
| |
| /* Disable FCS stripping */ |
| ipd_sub_port_fcs.u64 = |
| cvmx_read_csr(CVMX_IPD_SUB_PORT_FCS); |
| ipd_sub_port_fcs.s.port_bit &= |
| 0xffffffffull ^ (1ull << priv->port); |
| cvmx_write_csr(CVMX_IPD_SUB_PORT_FCS, |
| ipd_sub_port_fcs.u64); |
| |
| /* Clear any error bits */ |
| cvmx_write_csr(CVMX_GMXX_RXX_INT_REG |
| (index, interface), |
| gmxx_rxx_int_reg.u64); |
| printk_ratelimited("%s: Using 10Mbps with software " |
| "preamble removal\n", |
| dev->name); |
| } |
| } |
| |
| if (use_global_register_lock) |
| spin_unlock_irqrestore(&global_register_lock, flags); |
| else |
| mutex_unlock(&priv->phydev->bus->mdio_lock); |
| return; |
| } |
| |
| /* If the 10Mbps preamble workaround is allowed we need to on |
| preamble checking, FCS stripping, and clear error bits on |
| every speed change. If errors occur during 10Mbps operation |
| the above code will change this stuff */ |
| if (USE_10MBPS_PREAMBLE_WORKAROUND) { |
| |
| union cvmx_gmxx_rxx_frm_ctl gmxx_rxx_frm_ctl; |
| union cvmx_ipd_sub_port_fcs ipd_sub_port_fcs; |
| union cvmx_gmxx_rxx_int_reg gmxx_rxx_int_reg; |
| int interface = INTERFACE(priv->port); |
| int index = INDEX(priv->port); |
| |
| /* Enable preamble checking */ |
| gmxx_rxx_frm_ctl.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface)); |
| gmxx_rxx_frm_ctl.s.pre_chk = 1; |
| cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface), |
| gmxx_rxx_frm_ctl.u64); |
| /* Enable FCS stripping */ |
| ipd_sub_port_fcs.u64 = cvmx_read_csr(CVMX_IPD_SUB_PORT_FCS); |
| ipd_sub_port_fcs.s.port_bit |= 1ull << priv->port; |
| cvmx_write_csr(CVMX_IPD_SUB_PORT_FCS, ipd_sub_port_fcs.u64); |
| /* Clear any error bits */ |
| gmxx_rxx_int_reg.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(index, interface)); |
| cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), |
| gmxx_rxx_int_reg.u64); |
| } |
| if (priv->phydev == NULL) { |
| link_info = cvmx_helper_link_autoconf(priv->port); |
| priv->link_info = link_info.u64; |
| } |
| |
| if (use_global_register_lock) |
| spin_unlock_irqrestore(&global_register_lock, flags); |
| else { |
| mutex_unlock(&priv->phydev->bus->mdio_lock); |
| } |
| |
| if (priv->phydev == NULL) { |
| /* Tell core. */ |
| if (link_info.s.link_up) { |
| if (!netif_carrier_ok(dev)) |
| netif_carrier_on(dev); |
| if (priv->queue != -1) |
| printk_ratelimited("%s: %u Mbps %s duplex, " |
| "port %2d, queue %2d\n", |
| dev->name, link_info.s.speed, |
| (link_info.s.full_duplex) ? |
| "Full" : "Half", |
| priv->port, priv->queue); |
| else |
| printk_ratelimited("%s: %u Mbps %s duplex, " |
| "port %2d, POW\n", |
| dev->name, link_info.s.speed, |
| (link_info.s.full_duplex) ? |
| "Full" : "Half", |
| priv->port); |
| } else { |
| if (netif_carrier_ok(dev)) |
| netif_carrier_off(dev); |
| printk_ratelimited("%s: Link down\n", dev->name); |
| } |
| } |
| } |
| |
| static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id) |
| { |
| union cvmx_npi_rsl_int_blocks rsl_int_blocks; |
| int index; |
| irqreturn_t return_status = IRQ_NONE; |
| |
| rsl_int_blocks.u64 = cvmx_read_csr(CVMX_NPI_RSL_INT_BLOCKS); |
| |
| /* Check and see if this interrupt was caused by the GMX0 block */ |
| if (rsl_int_blocks.s.gmx0) { |
| |
| int interface = 0; |
| /* Loop through every port of this interface */ |
| for (index = 0; |
| index < cvmx_helper_ports_on_interface(interface); |
| index++) { |
| |
| /* Read the GMX interrupt status bits */ |
| union cvmx_gmxx_rxx_int_reg gmx_rx_int_reg; |
| gmx_rx_int_reg.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_REG |
| (index, interface)); |
| gmx_rx_int_reg.u64 &= |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_EN |
| (index, interface)); |
| /* Poll the port if inband status changed */ |
| if (gmx_rx_int_reg.s.phy_dupx |
| || gmx_rx_int_reg.s.phy_link |
| || gmx_rx_int_reg.s.phy_spd) { |
| |
| struct net_device *dev = |
| cvm_oct_device[cvmx_helper_get_ipd_port |
| (interface, index)]; |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| |
| if (dev && !atomic_read(&cvm_oct_poll_queue_stopping)) |
| queue_work(cvm_oct_poll_queue, &priv->port_work); |
| |
| gmx_rx_int_reg.u64 = 0; |
| gmx_rx_int_reg.s.phy_dupx = 1; |
| gmx_rx_int_reg.s.phy_link = 1; |
| gmx_rx_int_reg.s.phy_spd = 1; |
| cvmx_write_csr(CVMX_GMXX_RXX_INT_REG |
| (index, interface), |
| gmx_rx_int_reg.u64); |
| return_status = IRQ_HANDLED; |
| } |
| } |
| } |
| |
| /* Check and see if this interrupt was caused by the GMX1 block */ |
| if (rsl_int_blocks.s.gmx1) { |
| |
| int interface = 1; |
| /* Loop through every port of this interface */ |
| for (index = 0; |
| index < cvmx_helper_ports_on_interface(interface); |
| index++) { |
| |
| /* Read the GMX interrupt status bits */ |
| union cvmx_gmxx_rxx_int_reg gmx_rx_int_reg; |
| gmx_rx_int_reg.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_REG |
| (index, interface)); |
| gmx_rx_int_reg.u64 &= |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_EN |
| (index, interface)); |
| /* Poll the port if inband status changed */ |
| if (gmx_rx_int_reg.s.phy_dupx |
| || gmx_rx_int_reg.s.phy_link |
| || gmx_rx_int_reg.s.phy_spd) { |
| |
| struct net_device *dev = |
| cvm_oct_device[cvmx_helper_get_ipd_port |
| (interface, index)]; |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| |
| if (dev && !atomic_read(&cvm_oct_poll_queue_stopping)) |
| queue_work(cvm_oct_poll_queue, &priv->port_work); |
| |
| gmx_rx_int_reg.u64 = 0; |
| gmx_rx_int_reg.s.phy_dupx = 1; |
| gmx_rx_int_reg.s.phy_link = 1; |
| gmx_rx_int_reg.s.phy_spd = 1; |
| cvmx_write_csr(CVMX_GMXX_RXX_INT_REG |
| (index, interface), |
| gmx_rx_int_reg.u64); |
| return_status = IRQ_HANDLED; |
| } |
| } |
| } |
| return return_status; |
| } |
| |
| int cvm_oct_rgmii_open(struct net_device *dev) |
| { |
| union cvmx_gmxx_prtx_cfg gmx_cfg; |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| int interface = INTERFACE(priv->port); |
| int index = INDEX(priv->port); |
| cvmx_helper_link_info_t link_info; |
| |
| gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); |
| gmx_cfg.s.en = 1; |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); |
| |
| if (!octeon_is_simulation()) { |
| link_info = cvmx_helper_link_get(priv->port); |
| if (!link_info.s.link_up) |
| netif_carrier_off(dev); |
| } |
| |
| return 0; |
| } |
| |
| int cvm_oct_rgmii_stop(struct net_device *dev) |
| { |
| union cvmx_gmxx_prtx_cfg gmx_cfg; |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| int interface = INTERFACE(priv->port); |
| int index = INDEX(priv->port); |
| |
| gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); |
| gmx_cfg.s.en = 0; |
| cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); |
| return 0; |
| } |
| |
| static void cvm_oct_rgmii_immediate_poll(struct work_struct *work) |
| { |
| struct octeon_ethernet *priv = container_of(work, struct octeon_ethernet, port_work); |
| cvm_oct_rgmii_poll(cvm_oct_device[priv->port]); |
| } |
| |
| int cvm_oct_rgmii_init(struct net_device *dev) |
| { |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| int r; |
| |
| cvm_oct_common_init(dev); |
| dev->netdev_ops->ndo_stop(dev); |
| INIT_WORK(&priv->port_work, cvm_oct_rgmii_immediate_poll); |
| /* |
| * Due to GMX errata in CN3XXX series chips, it is necessary |
| * to take the link down immediately when the PHY changes |
| * state. In order to do this we call the poll function every |
| * time the RGMII inband status changes. This may cause |
| * problems if the PHY doesn't implement inband status |
| * properly. |
| */ |
| if (number_rgmii_ports == 0) { |
| r = request_irq(OCTEON_IRQ_RML, cvm_oct_rgmii_rml_interrupt, |
| IRQF_SHARED, "RGMII", &number_rgmii_ports); |
| if (r != 0) |
| return r; |
| } |
| number_rgmii_ports++; |
| |
| /* |
| * Only true RGMII ports need to be polled. In GMII mode, port |
| * 0 is really a RGMII port. |
| */ |
| if (((priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII) |
| && (priv->port == 0)) |
| || (priv->imode == CVMX_HELPER_INTERFACE_MODE_RGMII)) { |
| |
| if (!octeon_is_simulation()) { |
| |
| union cvmx_gmxx_rxx_int_en gmx_rx_int_en; |
| int interface = INTERFACE(priv->port); |
| int index = INDEX(priv->port); |
| |
| /* |
| * Enable interrupts on inband status changes |
| * for this port. |
| */ |
| gmx_rx_int_en.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_EN |
| (index, interface)); |
| gmx_rx_int_en.s.phy_dupx = 1; |
| gmx_rx_int_en.s.phy_link = 1; |
| gmx_rx_int_en.s.phy_spd = 1; |
| cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(index, interface), |
| gmx_rx_int_en.u64); |
| priv->poll = cvm_oct_rgmii_poll; |
| } |
| } |
| |
| return 0; |
| } |
| |
| void cvm_oct_rgmii_uninit(struct net_device *dev) |
| { |
| struct octeon_ethernet *priv = netdev_priv(dev); |
| cvm_oct_common_uninit(dev); |
| |
| /* |
| * Only true RGMII ports need to be polled. In GMII mode, port |
| * 0 is really a RGMII port. |
| */ |
| if (((priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII) |
| && (priv->port == 0)) |
| || (priv->imode == CVMX_HELPER_INTERFACE_MODE_RGMII)) { |
| |
| if (!octeon_is_simulation()) { |
| |
| union cvmx_gmxx_rxx_int_en gmx_rx_int_en; |
| int interface = INTERFACE(priv->port); |
| int index = INDEX(priv->port); |
| |
| /* |
| * Disable interrupts on inband status changes |
| * for this port. |
| */ |
| gmx_rx_int_en.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_INT_EN |
| (index, interface)); |
| gmx_rx_int_en.s.phy_dupx = 0; |
| gmx_rx_int_en.s.phy_link = 0; |
| gmx_rx_int_en.s.phy_spd = 0; |
| cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(index, interface), |
| gmx_rx_int_en.u64); |
| } |
| } |
| |
| /* Remove the interrupt handler when the last port is removed. */ |
| number_rgmii_ports--; |
| if (number_rgmii_ports == 0) |
| free_irq(OCTEON_IRQ_RML, &number_rgmii_ports); |
| cancel_work_sync(&priv->port_work); |
| } |