| /* |
| * Support for configuration of IO Delay module found on Texas Instruments SoCs |
| * such as DRA7 |
| * |
| * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #include "../core.h" |
| #include "../devicetree.h" |
| |
| #define DRIVER_NAME "ti-iodelay" |
| |
| /** |
| * struct ti_iodelay_reg_data - Describes the registers for the iodelay instance |
| * @signature_mask: CONFIG_REG mask for the signature bits (see TRM) |
| * @signature_value: CONFIG_REG signature value to be written (see TRM) |
| * @lock_mask: CONFIG_REG mask for the lock bits (see TRM) |
| * @lock_val: CONFIG_REG lock value for the lock bits (see TRM) |
| * @unlock_val:CONFIG_REG unlock value for the lock bits (see TRM) |
| * @binary_data_coarse_mask: CONFIG_REG coarse mask (see TRM) |
| * @binary_data_fine_mask: CONFIG_REG fine mask (see TRM) |
| * @reg_refclk_offset: Refclk register offset |
| * @refclk_period_mask: Refclk mask |
| * @reg_coarse_offset: Coarse register configuration offset |
| * @coarse_delay_count_mask: Coarse delay count mask |
| * @coarse_ref_count_mask: Coarse ref count mask |
| * @reg_fine_offset: Fine register configuration offset |
| * @fine_delay_count_mask: Fine delay count mask |
| * @fine_ref_count_mask: Fine ref count mask |
| * @reg_global_lock_offset: Global iodelay module lock register offset |
| * @global_lock_mask: Lock mask |
| * @global_unlock_val: Unlock value |
| * @global_lock_val: Lock value |
| * @reg_start_offset: Offset to iodelay registers after the CONFIG_REG_0 to 8 |
| * @reg_nr_per_pin: Number of iodelay registers for each pin |
| * @regmap_config: Regmap configuration for the IODelay region |
| */ |
| struct ti_iodelay_reg_data { |
| u32 signature_mask; |
| u32 signature_value; |
| u32 lock_mask; |
| u32 lock_val; |
| u32 unlock_val; |
| u32 binary_data_coarse_mask; |
| u32 binary_data_fine_mask; |
| |
| u32 reg_refclk_offset; |
| u32 refclk_period_mask; |
| |
| u32 reg_coarse_offset; |
| u32 coarse_delay_count_mask; |
| u32 coarse_ref_count_mask; |
| |
| u32 reg_fine_offset; |
| u32 fine_delay_count_mask; |
| u32 fine_ref_count_mask; |
| |
| u32 reg_global_lock_offset; |
| u32 global_lock_mask; |
| u32 global_unlock_val; |
| u32 global_lock_val; |
| |
| u32 reg_start_offset; |
| u32 reg_nr_per_pin; |
| |
| struct regmap_config *regmap_config; |
| }; |
| |
| /** |
| * struct ti_iodelay_reg_values - Computed io_reg configuration values (see TRM) |
| * @coarse_ref_count: Coarse reference count |
| * @coarse_delay_count: Coarse delay count |
| * @fine_ref_count: Fine reference count |
| * @fine_delay_count: Fine Delay count |
| * @ref_clk_period: Reference Clock period |
| * @cdpe: Coarse delay parameter |
| * @fdpe: Fine delay parameter |
| */ |
| struct ti_iodelay_reg_values { |
| u16 coarse_ref_count; |
| u16 coarse_delay_count; |
| |
| u16 fine_ref_count; |
| u16 fine_delay_count; |
| |
| u16 ref_clk_period; |
| |
| u32 cdpe; |
| u32 fdpe; |
| }; |
| |
| /** |
| * struct ti_iodelay_cfg - Description of each configuration parameters |
| * @offset: Configuration register offset |
| * @a_delay: Agnostic Delay (in ps) |
| * @g_delay: Gnostic Delay (in ps) |
| */ |
| struct ti_iodelay_cfg { |
| u16 offset; |
| u16 a_delay; |
| u16 g_delay; |
| }; |
| |
| /** |
| * struct ti_iodelay_pingroup - Structure that describes one group |
| * @cfg: configuration array for the pin (from dt) |
| * @ncfg: number of configuration values allocated |
| * @config: pinconf "Config" - currently a dummy value |
| */ |
| struct ti_iodelay_pingroup { |
| struct ti_iodelay_cfg *cfg; |
| int ncfg; |
| unsigned long config; |
| }; |
| |
| /** |
| * struct ti_iodelay_device - Represents information for a iodelay instance |
| * @dev: Device pointer |
| * @phys_base: Physical address base of the iodelay device |
| * @reg_base: Virtual address base of the iodelay device |
| * @regmap: Regmap for this iodelay instance |
| * @pctl: Pinctrl device |
| * @desc: pinctrl descriptor for pctl |
| * @pa: pinctrl pin wise description |
| * @reg_data: Register definition data for the IODelay instance |
| * @reg_init_conf_values: Initial configuration values. |
| */ |
| struct ti_iodelay_device { |
| struct device *dev; |
| unsigned long phys_base; |
| void __iomem *reg_base; |
| struct regmap *regmap; |
| |
| struct pinctrl_dev *pctl; |
| struct pinctrl_desc desc; |
| struct pinctrl_pin_desc *pa; |
| |
| const struct ti_iodelay_reg_data *reg_data; |
| struct ti_iodelay_reg_values reg_init_conf_values; |
| }; |
| |
| /** |
| * ti_iodelay_extract() - extract bits for a field |
| * @val: Register value |
| * @mask: Mask |
| * |
| * Return: extracted value which is appropriately shifted |
| */ |
| static inline u32 ti_iodelay_extract(u32 val, u32 mask) |
| { |
| return (val & mask) >> __ffs(mask); |
| } |
| |
| /** |
| * ti_iodelay_compute_dpe() - Compute equation for delay parameter |
| * @period: Period to use |
| * @ref: Reference Count |
| * @delay: Delay count |
| * @delay_m: Delay multiplier |
| * |
| * Return: Computed delay parameter |
| */ |
| static inline u32 ti_iodelay_compute_dpe(u16 period, u16 ref, u16 delay, |
| u16 delay_m) |
| { |
| u64 m, d; |
| |
| /* Handle overflow conditions */ |
| m = 10 * (u64)period * (u64)ref; |
| d = 2 * (u64)delay * (u64)delay_m; |
| |
| /* Truncate result back to 32 bits */ |
| return div64_u64(m, d); |
| } |
| |
| /** |
| * ti_iodelay_pinconf_set() - Configure the pin configuration |
| * @iod: iodelay device |
| * @cfg: Configuration |
| * |
| * Update the configuration register as per TRM and lockup once done. |
| * *IMPORTANT NOTE* SoC TRM does recommend doing iodelay programmation only |
| * while in Isolation. But, then, isolation also implies that every pin |
| * on the SoC (including DDR) will be isolated out. The only benefit being |
| * a glitchless configuration, However, the intent of this driver is purely |
| * to support a "glitchy" configuration where applicable. |
| * |
| * Return: 0 in case of success, else appropriate error value |
| */ |
| static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod, |
| struct ti_iodelay_cfg *cfg) |
| { |
| const struct ti_iodelay_reg_data *reg = iod->reg_data; |
| struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values; |
| struct device *dev = iod->dev; |
| u32 g_delay_coarse, g_delay_fine; |
| u32 a_delay_coarse, a_delay_fine; |
| u32 c_elements, f_elements; |
| u32 total_delay; |
| u32 reg_mask, reg_val, tmp_val; |
| int r; |
| |
| /* NOTE: Truncation is expected in all division below */ |
| g_delay_coarse = cfg->g_delay / 920; |
| g_delay_fine = ((cfg->g_delay % 920) * 10) / 60; |
| |
| a_delay_coarse = cfg->a_delay / ival->cdpe; |
| a_delay_fine = ((cfg->a_delay % ival->cdpe) * 10) / ival->fdpe; |
| |
| c_elements = g_delay_coarse + a_delay_coarse; |
| f_elements = (g_delay_fine + a_delay_fine) / 10; |
| |
| if (f_elements > 22) { |
| total_delay = c_elements * ival->cdpe + f_elements * ival->fdpe; |
| c_elements = total_delay / ival->cdpe; |
| f_elements = (total_delay % ival->cdpe) / ival->fdpe; |
| } |
| |
| reg_mask = reg->signature_mask; |
| reg_val = reg->signature_value << __ffs(reg->signature_mask); |
| |
| reg_mask |= reg->binary_data_coarse_mask; |
| tmp_val = c_elements << __ffs(reg->binary_data_coarse_mask); |
| if (tmp_val & ~reg->binary_data_coarse_mask) { |
| dev_err(dev, "Masking overflow of coarse elements %08x\n", |
| tmp_val); |
| tmp_val &= reg->binary_data_coarse_mask; |
| } |
| reg_val |= tmp_val; |
| |
| reg_mask |= reg->binary_data_fine_mask; |
| tmp_val = f_elements << __ffs(reg->binary_data_fine_mask); |
| if (tmp_val & ~reg->binary_data_fine_mask) { |
| dev_err(dev, "Masking overflow of fine elements %08x\n", |
| tmp_val); |
| tmp_val &= reg->binary_data_fine_mask; |
| } |
| reg_val |= tmp_val; |
| |
| /* |
| * NOTE: we leave the iodelay values unlocked - this is to work around |
| * situations such as those found with mmc mode change. |
| * However, this leaves open any unwarranted changes to padconf register |
| * impacting iodelay configuration. Use with care! |
| */ |
| reg_mask |= reg->lock_mask; |
| reg_val |= reg->unlock_val << __ffs(reg->lock_mask); |
| r = regmap_update_bits(iod->regmap, cfg->offset, reg_mask, reg_val); |
| |
| dev_info(dev, "Set reg 0x%x Delay(a: %d g: %d), Elements(C=%d F=%d)0x%x\n", |
| cfg->offset, cfg->a_delay, cfg->g_delay, c_elements, |
| f_elements, reg_val); |
| |
| return r; |
| } |
| |
| /** |
| * ti_iodelay_pinconf_init_dev() - Initialize IODelay device |
| * @iod: iodelay device |
| * |
| * Unlocks the iodelay region, computes the common parameters |
| * |
| * Return: 0 in case of success, else appropriate error value |
| */ |
| static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod) |
| { |
| const struct ti_iodelay_reg_data *reg = iod->reg_data; |
| struct device *dev = iod->dev; |
| struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values; |
| u32 val; |
| int r; |
| |
| /* unlock the iodelay region */ |
| r = regmap_update_bits(iod->regmap, reg->reg_global_lock_offset, |
| reg->global_lock_mask, reg->global_unlock_val); |
| if (r) |
| return r; |
| |
| /* Read up Recalibration sequence done by bootloader */ |
| r = regmap_read(iod->regmap, reg->reg_refclk_offset, &val); |
| if (r) |
| return r; |
| ival->ref_clk_period = ti_iodelay_extract(val, reg->refclk_period_mask); |
| dev_dbg(dev, "refclk_period=0x%04x\n", ival->ref_clk_period); |
| |
| r = regmap_read(iod->regmap, reg->reg_coarse_offset, &val); |
| if (r) |
| return r; |
| ival->coarse_ref_count = |
| ti_iodelay_extract(val, reg->coarse_ref_count_mask); |
| ival->coarse_delay_count = |
| ti_iodelay_extract(val, reg->coarse_delay_count_mask); |
| if (!ival->coarse_delay_count) { |
| dev_err(dev, "Invalid Coarse delay count (0) (reg=0x%08x)\n", |
| val); |
| return -EINVAL; |
| } |
| ival->cdpe = ti_iodelay_compute_dpe(ival->ref_clk_period, |
| ival->coarse_ref_count, |
| ival->coarse_delay_count, 88); |
| if (!ival->cdpe) { |
| dev_err(dev, "Invalid cdpe computed params = %d %d %d\n", |
| ival->ref_clk_period, ival->coarse_ref_count, |
| ival->coarse_delay_count); |
| return -EINVAL; |
| } |
| dev_dbg(iod->dev, "coarse: ref=0x%04x delay=0x%04x cdpe=0x%08x\n", |
| ival->coarse_ref_count, ival->coarse_delay_count, ival->cdpe); |
| |
| r = regmap_read(iod->regmap, reg->reg_fine_offset, &val); |
| if (r) |
| return r; |
| ival->fine_ref_count = |
| ti_iodelay_extract(val, reg->fine_ref_count_mask); |
| ival->fine_delay_count = |
| ti_iodelay_extract(val, reg->fine_delay_count_mask); |
| if (!ival->fine_delay_count) { |
| dev_err(dev, "Invalid Fine delay count (0) (reg=0x%08x)\n", |
| val); |
| return -EINVAL; |
| } |
| ival->fdpe = ti_iodelay_compute_dpe(ival->ref_clk_period, |
| ival->fine_ref_count, |
| ival->fine_delay_count, 264); |
| if (!ival->fdpe) { |
| dev_err(dev, "Invalid fdpe(0) computed params = %d %d %d\n", |
| ival->ref_clk_period, ival->fine_ref_count, |
| ival->fine_delay_count); |
| return -EINVAL; |
| } |
| dev_dbg(iod->dev, "fine: ref=0x%04x delay=0x%04x fdpe=0x%08x\n", |
| ival->fine_ref_count, ival->fine_delay_count, ival->fdpe); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_iodelay_pinconf_deinit_dev() - deinit the iodelay device |
| * @iod: IODelay device |
| * |
| * Deinitialize the IODelay device (basically just lock the region back up. |
| */ |
| static void ti_iodelay_pinconf_deinit_dev(struct ti_iodelay_device *iod) |
| { |
| const struct ti_iodelay_reg_data *reg = iod->reg_data; |
| |
| /* lock the iodelay region back again */ |
| regmap_update_bits(iod->regmap, reg->reg_global_lock_offset, |
| reg->global_lock_mask, reg->global_lock_val); |
| } |
| |
| /** |
| * ti_iodelay_get_pingroup() - Find the group mapped by a group selector |
| * @iod: iodelay device |
| * @selector: Group Selector |
| * |
| * Return: Corresponding group representing group selector |
| */ |
| static struct ti_iodelay_pingroup * |
| ti_iodelay_get_pingroup(struct ti_iodelay_device *iod, unsigned int selector) |
| { |
| struct group_desc *g; |
| |
| g = pinctrl_generic_get_group(iod->pctl, selector); |
| if (!g) { |
| dev_err(iod->dev, "%s could not find pingroup %i\n", __func__, |
| selector); |
| |
| return NULL; |
| } |
| |
| return g->data; |
| } |
| |
| /** |
| * ti_iodelay_offset_to_pin() - get a pin index based on the register offset |
| * @iod: iodelay driver instance |
| * @offset: register offset from the base |
| */ |
| static int ti_iodelay_offset_to_pin(struct ti_iodelay_device *iod, |
| unsigned int offset) |
| { |
| const struct ti_iodelay_reg_data *r = iod->reg_data; |
| unsigned int index; |
| |
| if (offset > r->regmap_config->max_register) { |
| dev_err(iod->dev, "mux offset out of range: 0x%x (0x%x)\n", |
| offset, r->regmap_config->max_register); |
| return -EINVAL; |
| } |
| |
| index = (offset - r->reg_start_offset) / r->regmap_config->reg_stride; |
| index /= r->reg_nr_per_pin; |
| |
| return index; |
| } |
| |
| /** |
| * ti_iodelay_node_iterator() - Iterate iodelay node |
| * @pctldev: Pin controller driver |
| * @np: Device node |
| * @pinctrl_spec: Parsed arguments from device tree |
| * @pins: Array of pins in the pin group |
| * @pin_index: Pin index in the pin array |
| * @data: Pin controller driver specific data |
| * |
| */ |
| static int ti_iodelay_node_iterator(struct pinctrl_dev *pctldev, |
| struct device_node *np, |
| const struct of_phandle_args *pinctrl_spec, |
| int *pins, int pin_index, void *data) |
| { |
| struct ti_iodelay_device *iod; |
| struct ti_iodelay_cfg *cfg = data; |
| const struct ti_iodelay_reg_data *r; |
| struct pinctrl_pin_desc *pd; |
| int pin; |
| |
| iod = pinctrl_dev_get_drvdata(pctldev); |
| if (!iod) |
| return -EINVAL; |
| |
| r = iod->reg_data; |
| |
| if (pinctrl_spec->args_count < r->reg_nr_per_pin) { |
| dev_err(iod->dev, "invalid args_count for spec: %i\n", |
| pinctrl_spec->args_count); |
| |
| return -EINVAL; |
| } |
| |
| /* Index plus two value cells */ |
| cfg[pin_index].offset = pinctrl_spec->args[0]; |
| cfg[pin_index].a_delay = pinctrl_spec->args[1] & 0xffff; |
| cfg[pin_index].g_delay = pinctrl_spec->args[2] & 0xffff; |
| |
| pin = ti_iodelay_offset_to_pin(iod, cfg[pin_index].offset); |
| if (pin < 0) { |
| dev_err(iod->dev, "could not add functions for %pOFn %ux\n", |
| np, cfg[pin_index].offset); |
| return -ENODEV; |
| } |
| pins[pin_index] = pin; |
| |
| pd = &iod->pa[pin]; |
| pd->drv_data = &cfg[pin_index]; |
| |
| dev_dbg(iod->dev, "%pOFn offset=%x a_delay = %d g_delay = %d\n", |
| np, cfg[pin_index].offset, cfg[pin_index].a_delay, |
| cfg[pin_index].g_delay); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_iodelay_dt_node_to_map() - Map a device tree node to appropriate group |
| * @pctldev: pinctrl device representing IODelay device |
| * @np: Node Pointer (device tree) |
| * @map: Pinctrl Map returned back to pinctrl framework |
| * @num_maps: Number of maps (1) |
| * |
| * Maps the device tree description into a group of configuration parameters |
| * for iodelay block entry. |
| * |
| * Return: 0 in case of success, else appropriate error value |
| */ |
| static int ti_iodelay_dt_node_to_map(struct pinctrl_dev *pctldev, |
| struct device_node *np, |
| struct pinctrl_map **map, |
| unsigned int *num_maps) |
| { |
| struct ti_iodelay_device *iod; |
| struct ti_iodelay_cfg *cfg; |
| struct ti_iodelay_pingroup *g; |
| const char *name = "pinctrl-pin-array"; |
| int rows, *pins, error = -EINVAL, i; |
| |
| iod = pinctrl_dev_get_drvdata(pctldev); |
| if (!iod) |
| return -EINVAL; |
| |
| rows = pinctrl_count_index_with_args(np, name); |
| if (rows == -EINVAL) |
| return rows; |
| |
| *map = devm_kzalloc(iod->dev, sizeof(**map), GFP_KERNEL); |
| if (!*map) |
| return -ENOMEM; |
| *num_maps = 0; |
| |
| g = devm_kzalloc(iod->dev, sizeof(*g), GFP_KERNEL); |
| if (!g) { |
| error = -ENOMEM; |
| goto free_map; |
| } |
| |
| pins = devm_kcalloc(iod->dev, rows, sizeof(*pins), GFP_KERNEL); |
| if (!pins) |
| goto free_group; |
| |
| cfg = devm_kcalloc(iod->dev, rows, sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) { |
| error = -ENOMEM; |
| goto free_pins; |
| } |
| |
| for (i = 0; i < rows; i++) { |
| struct of_phandle_args pinctrl_spec; |
| |
| error = pinctrl_parse_index_with_args(np, name, i, |
| &pinctrl_spec); |
| if (error) |
| goto free_data; |
| |
| error = ti_iodelay_node_iterator(pctldev, np, &pinctrl_spec, |
| pins, i, cfg); |
| if (error) |
| goto free_data; |
| } |
| |
| g->cfg = cfg; |
| g->ncfg = i; |
| g->config = PIN_CONFIG_END; |
| |
| error = pinctrl_generic_add_group(iod->pctl, np->name, pins, i, g); |
| if (error < 0) |
| goto free_data; |
| |
| (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP; |
| (*map)->data.configs.group_or_pin = np->name; |
| (*map)->data.configs.configs = &g->config; |
| (*map)->data.configs.num_configs = 1; |
| *num_maps = 1; |
| |
| return 0; |
| |
| free_data: |
| devm_kfree(iod->dev, cfg); |
| free_pins: |
| devm_kfree(iod->dev, pins); |
| free_group: |
| devm_kfree(iod->dev, g); |
| free_map: |
| devm_kfree(iod->dev, *map); |
| |
| return error; |
| } |
| |
| /** |
| * ti_iodelay_pinconf_group_get() - Get the group configuration |
| * @pctldev: pinctrl device representing IODelay device |
| * @selector: Group selector |
| * @config: Configuration returned |
| * |
| * Return: The configuration if the group is valid, else returns -EINVAL |
| */ |
| static int ti_iodelay_pinconf_group_get(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned long *config) |
| { |
| struct ti_iodelay_device *iod; |
| struct ti_iodelay_pingroup *group; |
| |
| iod = pinctrl_dev_get_drvdata(pctldev); |
| group = ti_iodelay_get_pingroup(iod, selector); |
| |
| if (!group) |
| return -EINVAL; |
| |
| *config = group->config; |
| return 0; |
| } |
| |
| /** |
| * ti_iodelay_pinconf_group_set() - Configure the groups of pins |
| * @pctldev: pinctrl device representing IODelay device |
| * @selector: Group selector |
| * @configs: Configurations |
| * @num_configs: Number of configurations |
| * |
| * Return: 0 if all went fine, else appropriate error value. |
| */ |
| static int ti_iodelay_pinconf_group_set(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned long *configs, |
| unsigned int num_configs) |
| { |
| struct ti_iodelay_device *iod; |
| struct device *dev; |
| struct ti_iodelay_pingroup *group; |
| int i; |
| |
| iod = pinctrl_dev_get_drvdata(pctldev); |
| dev = iod->dev; |
| group = ti_iodelay_get_pingroup(iod, selector); |
| |
| if (num_configs != 1) { |
| dev_err(dev, "Unsupported number of configurations %d\n", |
| num_configs); |
| return -EINVAL; |
| } |
| |
| if (*configs != PIN_CONFIG_END) { |
| dev_err(dev, "Unsupported configuration\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < group->ncfg; i++) { |
| if (ti_iodelay_pinconf_set(iod, &group->cfg[i])) |
| return -ENOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| /** |
| * ti_iodelay_pin_to_offset() - get pin register offset based on the pin index |
| * @iod: iodelay driver instance |
| * @selector: Pin index |
| */ |
| static unsigned int ti_iodelay_pin_to_offset(struct ti_iodelay_device *iod, |
| unsigned int selector) |
| { |
| const struct ti_iodelay_reg_data *r = iod->reg_data; |
| unsigned int offset; |
| |
| offset = selector * r->regmap_config->reg_stride; |
| offset *= r->reg_nr_per_pin; |
| offset += r->reg_start_offset; |
| |
| return offset; |
| } |
| |
| static void ti_iodelay_pin_dbg_show(struct pinctrl_dev *pctldev, |
| struct seq_file *s, |
| unsigned int pin) |
| { |
| struct ti_iodelay_device *iod; |
| struct pinctrl_pin_desc *pd; |
| struct ti_iodelay_cfg *cfg; |
| const struct ti_iodelay_reg_data *r; |
| unsigned long offset; |
| u32 in, oen, out; |
| |
| iod = pinctrl_dev_get_drvdata(pctldev); |
| r = iod->reg_data; |
| |
| offset = ti_iodelay_pin_to_offset(iod, pin); |
| pd = &iod->pa[pin]; |
| cfg = pd->drv_data; |
| |
| regmap_read(iod->regmap, offset, &in); |
| regmap_read(iod->regmap, offset + r->regmap_config->reg_stride, &oen); |
| regmap_read(iod->regmap, offset + r->regmap_config->reg_stride * 2, |
| &out); |
| |
| seq_printf(s, "%lx a: %i g: %i (%08x %08x %08x) %s ", |
| iod->phys_base + offset, |
| cfg ? cfg->a_delay : -1, |
| cfg ? cfg->g_delay : -1, |
| in, oen, out, DRIVER_NAME); |
| } |
| |
| /** |
| * ti_iodelay_pinconf_group_dbg_show() - show the group information |
| * @pctldev: Show the group information |
| * @s: Sequence file |
| * @selector: Group selector |
| * |
| * Provide the configuration information of the selected group |
| */ |
| static void ti_iodelay_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, |
| struct seq_file *s, |
| unsigned int selector) |
| { |
| struct ti_iodelay_device *iod; |
| struct ti_iodelay_pingroup *group; |
| int i; |
| |
| iod = pinctrl_dev_get_drvdata(pctldev); |
| group = ti_iodelay_get_pingroup(iod, selector); |
| if (!group) |
| return; |
| |
| for (i = 0; i < group->ncfg; i++) { |
| struct ti_iodelay_cfg *cfg; |
| u32 reg = 0; |
| |
| cfg = &group->cfg[i]; |
| regmap_read(iod->regmap, cfg->offset, ®), |
| seq_printf(s, "\n\t0x%08x = 0x%08x (%3d, %3d)", |
| cfg->offset, reg, cfg->a_delay, |
| cfg->g_delay); |
| } |
| } |
| #endif |
| |
| static const struct pinctrl_ops ti_iodelay_pinctrl_ops = { |
| .get_groups_count = pinctrl_generic_get_group_count, |
| .get_group_name = pinctrl_generic_get_group_name, |
| .get_group_pins = pinctrl_generic_get_group_pins, |
| #ifdef CONFIG_DEBUG_FS |
| .pin_dbg_show = ti_iodelay_pin_dbg_show, |
| #endif |
| .dt_node_to_map = ti_iodelay_dt_node_to_map, |
| }; |
| |
| static const struct pinconf_ops ti_iodelay_pinctrl_pinconf_ops = { |
| .pin_config_group_get = ti_iodelay_pinconf_group_get, |
| .pin_config_group_set = ti_iodelay_pinconf_group_set, |
| #ifdef CONFIG_DEBUG_FS |
| .pin_config_group_dbg_show = ti_iodelay_pinconf_group_dbg_show, |
| #endif |
| }; |
| |
| /** |
| * ti_iodelay_alloc_pins() - Allocate structures needed for pins for iodelay |
| * @dev: Device pointer |
| * @iod: iodelay device |
| * @base_phy: Base Physical Address |
| * |
| * Return: 0 if all went fine, else appropriate error value. |
| */ |
| static int ti_iodelay_alloc_pins(struct device *dev, |
| struct ti_iodelay_device *iod, u32 base_phy) |
| { |
| const struct ti_iodelay_reg_data *r = iod->reg_data; |
| struct pinctrl_pin_desc *pin; |
| u32 phy_reg; |
| int nr_pins, i; |
| |
| nr_pins = ti_iodelay_offset_to_pin(iod, r->regmap_config->max_register); |
| dev_dbg(dev, "Allocating %i pins\n", nr_pins); |
| |
| iod->pa = devm_kcalloc(dev, nr_pins, sizeof(*iod->pa), GFP_KERNEL); |
| if (!iod->pa) |
| return -ENOMEM; |
| |
| iod->desc.pins = iod->pa; |
| iod->desc.npins = nr_pins; |
| |
| phy_reg = r->reg_start_offset + base_phy; |
| |
| for (i = 0; i < nr_pins; i++, phy_reg += 4) { |
| pin = &iod->pa[i]; |
| pin->number = i; |
| } |
| |
| return 0; |
| } |
| |
| static struct regmap_config dra7_iodelay_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| .max_register = 0xd1c, |
| }; |
| |
| static struct ti_iodelay_reg_data dra7_iodelay_data = { |
| .signature_mask = 0x0003f000, |
| .signature_value = 0x29, |
| .lock_mask = 0x00000400, |
| .lock_val = 1, |
| .unlock_val = 0, |
| .binary_data_coarse_mask = 0x000003e0, |
| .binary_data_fine_mask = 0x0000001f, |
| |
| .reg_refclk_offset = 0x14, |
| .refclk_period_mask = 0xffff, |
| |
| .reg_coarse_offset = 0x18, |
| .coarse_delay_count_mask = 0xffff0000, |
| .coarse_ref_count_mask = 0x0000ffff, |
| |
| .reg_fine_offset = 0x1C, |
| .fine_delay_count_mask = 0xffff0000, |
| .fine_ref_count_mask = 0x0000ffff, |
| |
| .reg_global_lock_offset = 0x2c, |
| .global_lock_mask = 0x0000ffff, |
| .global_unlock_val = 0x0000aaaa, |
| .global_lock_val = 0x0000aaab, |
| |
| .reg_start_offset = 0x30, |
| .reg_nr_per_pin = 3, |
| .regmap_config = &dra7_iodelay_regmap_config, |
| }; |
| |
| static const struct of_device_id ti_iodelay_of_match[] = { |
| {.compatible = "ti,dra7-iodelay", .data = &dra7_iodelay_data}, |
| { /* Hopefully no more.. */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, ti_iodelay_of_match); |
| |
| /** |
| * ti_iodelay_probe() - Standard probe |
| * @pdev: platform device |
| * |
| * Return: 0 if all went fine, else appropriate error value. |
| */ |
| static int ti_iodelay_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = of_node_get(dev->of_node); |
| const struct of_device_id *match; |
| struct resource *res; |
| struct ti_iodelay_device *iod; |
| int ret = 0; |
| |
| if (!np) { |
| ret = -EINVAL; |
| dev_err(dev, "No OF node\n"); |
| goto exit_out; |
| } |
| |
| match = of_match_device(ti_iodelay_of_match, dev); |
| if (!match) { |
| ret = -EINVAL; |
| dev_err(dev, "No DATA match\n"); |
| goto exit_out; |
| } |
| |
| iod = devm_kzalloc(dev, sizeof(*iod), GFP_KERNEL); |
| if (!iod) { |
| ret = -ENOMEM; |
| goto exit_out; |
| } |
| iod->dev = dev; |
| iod->reg_data = match->data; |
| |
| /* So far We can assume there is only 1 bank of registers */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "Missing MEM resource\n"); |
| ret = -ENODEV; |
| goto exit_out; |
| } |
| |
| iod->phys_base = res->start; |
| iod->reg_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(iod->reg_base)) { |
| ret = PTR_ERR(iod->reg_base); |
| goto exit_out; |
| } |
| |
| iod->regmap = devm_regmap_init_mmio(dev, iod->reg_base, |
| iod->reg_data->regmap_config); |
| if (IS_ERR(iod->regmap)) { |
| dev_err(dev, "Regmap MMIO init failed.\n"); |
| ret = PTR_ERR(iod->regmap); |
| goto exit_out; |
| } |
| |
| if (ti_iodelay_pinconf_init_dev(iod)) |
| goto exit_out; |
| |
| ret = ti_iodelay_alloc_pins(dev, iod, res->start); |
| if (ret) |
| goto exit_out; |
| |
| iod->desc.pctlops = &ti_iodelay_pinctrl_ops; |
| /* no pinmux ops - we are pinconf */ |
| iod->desc.confops = &ti_iodelay_pinctrl_pinconf_ops; |
| iod->desc.name = dev_name(dev); |
| iod->desc.owner = THIS_MODULE; |
| |
| ret = pinctrl_register_and_init(&iod->desc, dev, iod, &iod->pctl); |
| if (ret) { |
| dev_err(dev, "Failed to register pinctrl\n"); |
| goto exit_out; |
| } |
| |
| platform_set_drvdata(pdev, iod); |
| |
| return pinctrl_enable(iod->pctl); |
| |
| exit_out: |
| of_node_put(np); |
| return ret; |
| } |
| |
| /** |
| * ti_iodelay_remove() - standard remove |
| * @pdev: platform device |
| * |
| * Return: 0 if all went fine, else appropriate error value. |
| */ |
| static int ti_iodelay_remove(struct platform_device *pdev) |
| { |
| struct ti_iodelay_device *iod = platform_get_drvdata(pdev); |
| |
| if (!iod) |
| return 0; |
| |
| if (iod->pctl) |
| pinctrl_unregister(iod->pctl); |
| |
| ti_iodelay_pinconf_deinit_dev(iod); |
| |
| /* Expect other allocations to be freed by devm */ |
| |
| return 0; |
| } |
| |
| static struct platform_driver ti_iodelay_driver = { |
| .probe = ti_iodelay_probe, |
| .remove = ti_iodelay_remove, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = DRIVER_NAME, |
| .of_match_table = ti_iodelay_of_match, |
| }, |
| }; |
| module_platform_driver(ti_iodelay_driver); |
| |
| MODULE_AUTHOR("Texas Instruments, Inc."); |
| MODULE_DESCRIPTION("Pinconf driver for TI's IO Delay module"); |
| MODULE_LICENSE("GPL v2"); |