| // SPDX-License-Identifier: ISC |
| /* |
| * Copyright (c) 2014-2017 Qualcomm Atheros, Inc. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/bitops.h> |
| #include <linux/bitfield.h> |
| #include "core.h" |
| #include "hw.h" |
| #include "hif.h" |
| #include "wmi-ops.h" |
| #include "bmi.h" |
| |
| const struct ath10k_hw_regs qca988x_regs = { |
| .rtc_soc_base_address = 0x00004000, |
| .rtc_wmac_base_address = 0x00005000, |
| .soc_core_base_address = 0x00009000, |
| .wlan_mac_base_address = 0x00020000, |
| .ce_wrapper_base_address = 0x00057000, |
| .ce0_base_address = 0x00057400, |
| .ce1_base_address = 0x00057800, |
| .ce2_base_address = 0x00057c00, |
| .ce3_base_address = 0x00058000, |
| .ce4_base_address = 0x00058400, |
| .ce5_base_address = 0x00058800, |
| .ce6_base_address = 0x00058c00, |
| .ce7_base_address = 0x00059000, |
| .soc_reset_control_si0_rst_mask = 0x00000001, |
| .soc_reset_control_ce_rst_mask = 0x00040000, |
| .soc_chip_id_address = 0x000000ec, |
| .scratch_3_address = 0x00000030, |
| .fw_indicator_address = 0x00009030, |
| .pcie_local_base_address = 0x00080000, |
| .ce_wrap_intr_sum_host_msi_lsb = 0x00000008, |
| .ce_wrap_intr_sum_host_msi_mask = 0x0000ff00, |
| .pcie_intr_fw_mask = 0x00000400, |
| .pcie_intr_ce_mask_all = 0x0007f800, |
| .pcie_intr_clr_address = 0x00000014, |
| }; |
| |
| const struct ath10k_hw_regs qca6174_regs = { |
| .rtc_soc_base_address = 0x00000800, |
| .rtc_wmac_base_address = 0x00001000, |
| .soc_core_base_address = 0x0003a000, |
| .wlan_mac_base_address = 0x00010000, |
| .ce_wrapper_base_address = 0x00034000, |
| .ce0_base_address = 0x00034400, |
| .ce1_base_address = 0x00034800, |
| .ce2_base_address = 0x00034c00, |
| .ce3_base_address = 0x00035000, |
| .ce4_base_address = 0x00035400, |
| .ce5_base_address = 0x00035800, |
| .ce6_base_address = 0x00035c00, |
| .ce7_base_address = 0x00036000, |
| .soc_reset_control_si0_rst_mask = 0x00000000, |
| .soc_reset_control_ce_rst_mask = 0x00000001, |
| .soc_chip_id_address = 0x000000f0, |
| .scratch_3_address = 0x00000028, |
| .fw_indicator_address = 0x0003a028, |
| .pcie_local_base_address = 0x00080000, |
| .ce_wrap_intr_sum_host_msi_lsb = 0x00000008, |
| .ce_wrap_intr_sum_host_msi_mask = 0x0000ff00, |
| .pcie_intr_fw_mask = 0x00000400, |
| .pcie_intr_ce_mask_all = 0x0007f800, |
| .pcie_intr_clr_address = 0x00000014, |
| .cpu_pll_init_address = 0x00404020, |
| .cpu_speed_address = 0x00404024, |
| .core_clk_div_address = 0x00404028, |
| }; |
| |
| const struct ath10k_hw_regs qca99x0_regs = { |
| .rtc_soc_base_address = 0x00080000, |
| .rtc_wmac_base_address = 0x00000000, |
| .soc_core_base_address = 0x00082000, |
| .wlan_mac_base_address = 0x00030000, |
| .ce_wrapper_base_address = 0x0004d000, |
| .ce0_base_address = 0x0004a000, |
| .ce1_base_address = 0x0004a400, |
| .ce2_base_address = 0x0004a800, |
| .ce3_base_address = 0x0004ac00, |
| .ce4_base_address = 0x0004b000, |
| .ce5_base_address = 0x0004b400, |
| .ce6_base_address = 0x0004b800, |
| .ce7_base_address = 0x0004bc00, |
| /* Note: qca99x0 supports upto 12 Copy Engines. Other than address of |
| * CE0 and CE1 no other copy engine is directly referred in the code. |
| * It is not really necessary to assign address for newly supported |
| * CEs in this address table. |
| * Copy Engine Address |
| * CE8 0x0004c000 |
| * CE9 0x0004c400 |
| * CE10 0x0004c800 |
| * CE11 0x0004cc00 |
| */ |
| .soc_reset_control_si0_rst_mask = 0x00000001, |
| .soc_reset_control_ce_rst_mask = 0x00000100, |
| .soc_chip_id_address = 0x000000ec, |
| .scratch_3_address = 0x00040050, |
| .fw_indicator_address = 0x00040050, |
| .pcie_local_base_address = 0x00000000, |
| .ce_wrap_intr_sum_host_msi_lsb = 0x0000000c, |
| .ce_wrap_intr_sum_host_msi_mask = 0x00fff000, |
| .pcie_intr_fw_mask = 0x00100000, |
| .pcie_intr_ce_mask_all = 0x000fff00, |
| .pcie_intr_clr_address = 0x00000010, |
| }; |
| |
| const struct ath10k_hw_regs qca4019_regs = { |
| .rtc_soc_base_address = 0x00080000, |
| .soc_core_base_address = 0x00082000, |
| .wlan_mac_base_address = 0x00030000, |
| .ce_wrapper_base_address = 0x0004d000, |
| .ce0_base_address = 0x0004a000, |
| .ce1_base_address = 0x0004a400, |
| .ce2_base_address = 0x0004a800, |
| .ce3_base_address = 0x0004ac00, |
| .ce4_base_address = 0x0004b000, |
| .ce5_base_address = 0x0004b400, |
| .ce6_base_address = 0x0004b800, |
| .ce7_base_address = 0x0004bc00, |
| /* qca4019 supports upto 12 copy engines. Since base address |
| * of ce8 to ce11 are not directly referred in the code, |
| * no need have them in separate members in this table. |
| * Copy Engine Address |
| * CE8 0x0004c000 |
| * CE9 0x0004c400 |
| * CE10 0x0004c800 |
| * CE11 0x0004cc00 |
| */ |
| .soc_reset_control_si0_rst_mask = 0x00000001, |
| .soc_reset_control_ce_rst_mask = 0x00000100, |
| .soc_chip_id_address = 0x000000ec, |
| .fw_indicator_address = 0x0004f00c, |
| .ce_wrap_intr_sum_host_msi_lsb = 0x0000000c, |
| .ce_wrap_intr_sum_host_msi_mask = 0x00fff000, |
| .pcie_intr_fw_mask = 0x00100000, |
| .pcie_intr_ce_mask_all = 0x000fff00, |
| .pcie_intr_clr_address = 0x00000010, |
| }; |
| |
| const struct ath10k_hw_values qca988x_values = { |
| .rtc_state_val_on = 3, |
| .ce_count = 8, |
| .msi_assign_ce_max = 7, |
| .num_target_ce_config_wlan = 7, |
| .ce_desc_meta_data_mask = 0xFFFC, |
| .ce_desc_meta_data_lsb = 2, |
| }; |
| |
| const struct ath10k_hw_values qca6174_values = { |
| .rtc_state_val_on = 3, |
| .ce_count = 8, |
| .msi_assign_ce_max = 7, |
| .num_target_ce_config_wlan = 7, |
| .ce_desc_meta_data_mask = 0xFFFC, |
| .ce_desc_meta_data_lsb = 2, |
| .rfkill_pin = 16, |
| .rfkill_cfg = 0, |
| .rfkill_on_level = 1, |
| }; |
| |
| const struct ath10k_hw_values qca99x0_values = { |
| .rtc_state_val_on = 7, |
| .ce_count = 12, |
| .msi_assign_ce_max = 12, |
| .num_target_ce_config_wlan = 10, |
| .ce_desc_meta_data_mask = 0xFFF0, |
| .ce_desc_meta_data_lsb = 4, |
| }; |
| |
| const struct ath10k_hw_values qca9888_values = { |
| .rtc_state_val_on = 3, |
| .ce_count = 12, |
| .msi_assign_ce_max = 12, |
| .num_target_ce_config_wlan = 10, |
| .ce_desc_meta_data_mask = 0xFFF0, |
| .ce_desc_meta_data_lsb = 4, |
| }; |
| |
| const struct ath10k_hw_values qca4019_values = { |
| .ce_count = 12, |
| .num_target_ce_config_wlan = 10, |
| .ce_desc_meta_data_mask = 0xFFF0, |
| .ce_desc_meta_data_lsb = 4, |
| }; |
| |
| const struct ath10k_hw_regs wcn3990_regs = { |
| .rtc_soc_base_address = 0x00000000, |
| .rtc_wmac_base_address = 0x00000000, |
| .soc_core_base_address = 0x00000000, |
| .ce_wrapper_base_address = 0x0024C000, |
| .ce0_base_address = 0x00240000, |
| .ce1_base_address = 0x00241000, |
| .ce2_base_address = 0x00242000, |
| .ce3_base_address = 0x00243000, |
| .ce4_base_address = 0x00244000, |
| .ce5_base_address = 0x00245000, |
| .ce6_base_address = 0x00246000, |
| .ce7_base_address = 0x00247000, |
| .ce8_base_address = 0x00248000, |
| .ce9_base_address = 0x00249000, |
| .ce10_base_address = 0x0024A000, |
| .ce11_base_address = 0x0024B000, |
| .soc_chip_id_address = 0x000000f0, |
| .soc_reset_control_si0_rst_mask = 0x00000001, |
| .soc_reset_control_ce_rst_mask = 0x00000100, |
| .ce_wrap_intr_sum_host_msi_lsb = 0x0000000c, |
| .ce_wrap_intr_sum_host_msi_mask = 0x00fff000, |
| .pcie_intr_fw_mask = 0x00100000, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_src_ring = { |
| .msb = 0x00000010, |
| .lsb = 0x00000010, |
| .mask = GENMASK(17, 17), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_ring = { |
| .msb = 0x00000012, |
| .lsb = 0x00000012, |
| .mask = GENMASK(18, 18), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_dmax = { |
| .msb = 0x00000000, |
| .lsb = 0x00000000, |
| .mask = GENMASK(15, 0), |
| }; |
| |
| static struct ath10k_hw_ce_ctrl1 wcn3990_ctrl1 = { |
| .addr = 0x00000018, |
| .src_ring = &wcn3990_src_ring, |
| .dst_ring = &wcn3990_dst_ring, |
| .dmax = &wcn3990_dmax, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_host_ie_cc = { |
| .mask = GENMASK(0, 0), |
| }; |
| |
| static struct ath10k_hw_ce_host_ie wcn3990_host_ie = { |
| .copy_complete = &wcn3990_host_ie_cc, |
| }; |
| |
| static struct ath10k_hw_ce_host_wm_regs wcn3990_wm_reg = { |
| .dstr_lmask = 0x00000010, |
| .dstr_hmask = 0x00000008, |
| .srcr_lmask = 0x00000004, |
| .srcr_hmask = 0x00000002, |
| .cc_mask = 0x00000001, |
| .wm_mask = 0x0000001E, |
| .addr = 0x00000030, |
| }; |
| |
| static struct ath10k_hw_ce_misc_regs wcn3990_misc_reg = { |
| .axi_err = 0x00000100, |
| .dstr_add_err = 0x00000200, |
| .srcr_len_err = 0x00000100, |
| .dstr_mlen_vio = 0x00000080, |
| .dstr_overflow = 0x00000040, |
| .srcr_overflow = 0x00000020, |
| .err_mask = 0x000003E0, |
| .addr = 0x00000038, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_src_wm_low = { |
| .msb = 0x00000000, |
| .lsb = 0x00000010, |
| .mask = GENMASK(31, 16), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_src_wm_high = { |
| .msb = 0x0000000f, |
| .lsb = 0x00000000, |
| .mask = GENMASK(15, 0), |
| }; |
| |
| static struct ath10k_hw_ce_dst_src_wm_regs wcn3990_wm_src_ring = { |
| .addr = 0x0000004c, |
| .low_rst = 0x00000000, |
| .high_rst = 0x00000000, |
| .wm_low = &wcn3990_src_wm_low, |
| .wm_high = &wcn3990_src_wm_high, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_wm_low = { |
| .lsb = 0x00000010, |
| .mask = GENMASK(31, 16), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_wm_high = { |
| .msb = 0x0000000f, |
| .lsb = 0x00000000, |
| .mask = GENMASK(15, 0), |
| }; |
| |
| static struct ath10k_hw_ce_dst_src_wm_regs wcn3990_wm_dst_ring = { |
| .addr = 0x00000050, |
| .low_rst = 0x00000000, |
| .high_rst = 0x00000000, |
| .wm_low = &wcn3990_dst_wm_low, |
| .wm_high = &wcn3990_dst_wm_high, |
| }; |
| |
| static struct ath10k_hw_ce_ctrl1_upd wcn3990_ctrl1_upd = { |
| .shift = 19, |
| .mask = 0x00080000, |
| .enable = 0x00000000, |
| }; |
| |
| const struct ath10k_hw_ce_regs wcn3990_ce_regs = { |
| .sr_base_addr_lo = 0x00000000, |
| .sr_base_addr_hi = 0x00000004, |
| .sr_size_addr = 0x00000008, |
| .dr_base_addr_lo = 0x0000000c, |
| .dr_base_addr_hi = 0x00000010, |
| .dr_size_addr = 0x00000014, |
| .misc_ie_addr = 0x00000034, |
| .sr_wr_index_addr = 0x0000003c, |
| .dst_wr_index_addr = 0x00000040, |
| .current_srri_addr = 0x00000044, |
| .current_drri_addr = 0x00000048, |
| .ce_rri_low = 0x0024C004, |
| .ce_rri_high = 0x0024C008, |
| .host_ie_addr = 0x0000002c, |
| .ctrl1_regs = &wcn3990_ctrl1, |
| .host_ie = &wcn3990_host_ie, |
| .wm_regs = &wcn3990_wm_reg, |
| .misc_regs = &wcn3990_misc_reg, |
| .wm_srcr = &wcn3990_wm_src_ring, |
| .wm_dstr = &wcn3990_wm_dst_ring, |
| .upd = &wcn3990_ctrl1_upd, |
| }; |
| |
| const struct ath10k_hw_values wcn3990_values = { |
| .rtc_state_val_on = 5, |
| .ce_count = 12, |
| .msi_assign_ce_max = 12, |
| .num_target_ce_config_wlan = 12, |
| .ce_desc_meta_data_mask = 0xFFF0, |
| .ce_desc_meta_data_lsb = 4, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_src_ring = { |
| .msb = 0x00000010, |
| .lsb = 0x00000010, |
| .mask = GENMASK(16, 16), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_dst_ring = { |
| .msb = 0x00000011, |
| .lsb = 0x00000011, |
| .mask = GENMASK(17, 17), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_dmax = { |
| .msb = 0x0000000f, |
| .lsb = 0x00000000, |
| .mask = GENMASK(15, 0), |
| }; |
| |
| static struct ath10k_hw_ce_ctrl1 qcax_ctrl1 = { |
| .addr = 0x00000010, |
| .hw_mask = 0x0007ffff, |
| .sw_mask = 0x0007ffff, |
| .hw_wr_mask = 0x00000000, |
| .sw_wr_mask = 0x0007ffff, |
| .reset_mask = 0xffffffff, |
| .reset = 0x00000080, |
| .src_ring = &qcax_src_ring, |
| .dst_ring = &qcax_dst_ring, |
| .dmax = &qcax_dmax, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_cmd_halt_status = { |
| .msb = 0x00000003, |
| .lsb = 0x00000003, |
| .mask = GENMASK(3, 3), |
| }; |
| |
| static struct ath10k_hw_ce_cmd_halt qcax_cmd_halt = { |
| .msb = 0x00000000, |
| .mask = GENMASK(0, 0), |
| .status_reset = 0x00000000, |
| .status = &qcax_cmd_halt_status, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_host_ie_cc = { |
| .msb = 0x00000000, |
| .lsb = 0x00000000, |
| .mask = GENMASK(0, 0), |
| }; |
| |
| static struct ath10k_hw_ce_host_ie qcax_host_ie = { |
| .copy_complete_reset = 0x00000000, |
| .copy_complete = &qcax_host_ie_cc, |
| }; |
| |
| static struct ath10k_hw_ce_host_wm_regs qcax_wm_reg = { |
| .dstr_lmask = 0x00000010, |
| .dstr_hmask = 0x00000008, |
| .srcr_lmask = 0x00000004, |
| .srcr_hmask = 0x00000002, |
| .cc_mask = 0x00000001, |
| .wm_mask = 0x0000001E, |
| .addr = 0x00000030, |
| }; |
| |
| static struct ath10k_hw_ce_misc_regs qcax_misc_reg = { |
| .axi_err = 0x00000400, |
| .dstr_add_err = 0x00000200, |
| .srcr_len_err = 0x00000100, |
| .dstr_mlen_vio = 0x00000080, |
| .dstr_overflow = 0x00000040, |
| .srcr_overflow = 0x00000020, |
| .err_mask = 0x000007E0, |
| .addr = 0x00000038, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_src_wm_low = { |
| .msb = 0x0000001f, |
| .lsb = 0x00000010, |
| .mask = GENMASK(31, 16), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_src_wm_high = { |
| .msb = 0x0000000f, |
| .lsb = 0x00000000, |
| .mask = GENMASK(15, 0), |
| }; |
| |
| static struct ath10k_hw_ce_dst_src_wm_regs qcax_wm_src_ring = { |
| .addr = 0x0000004c, |
| .low_rst = 0x00000000, |
| .high_rst = 0x00000000, |
| .wm_low = &qcax_src_wm_low, |
| .wm_high = &qcax_src_wm_high, |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_dst_wm_low = { |
| .lsb = 0x00000010, |
| .mask = GENMASK(31, 16), |
| }; |
| |
| static struct ath10k_hw_ce_regs_addr_map qcax_dst_wm_high = { |
| .msb = 0x0000000f, |
| .lsb = 0x00000000, |
| .mask = GENMASK(15, 0), |
| }; |
| |
| static struct ath10k_hw_ce_dst_src_wm_regs qcax_wm_dst_ring = { |
| .addr = 0x00000050, |
| .low_rst = 0x00000000, |
| .high_rst = 0x00000000, |
| .wm_low = &qcax_dst_wm_low, |
| .wm_high = &qcax_dst_wm_high, |
| }; |
| |
| const struct ath10k_hw_ce_regs qcax_ce_regs = { |
| .sr_base_addr_lo = 0x00000000, |
| .sr_size_addr = 0x00000004, |
| .dr_base_addr_lo = 0x00000008, |
| .dr_size_addr = 0x0000000c, |
| .ce_cmd_addr = 0x00000018, |
| .misc_ie_addr = 0x00000034, |
| .sr_wr_index_addr = 0x0000003c, |
| .dst_wr_index_addr = 0x00000040, |
| .current_srri_addr = 0x00000044, |
| .current_drri_addr = 0x00000048, |
| .host_ie_addr = 0x0000002c, |
| .ctrl1_regs = &qcax_ctrl1, |
| .cmd_halt = &qcax_cmd_halt, |
| .host_ie = &qcax_host_ie, |
| .wm_regs = &qcax_wm_reg, |
| .misc_regs = &qcax_misc_reg, |
| .wm_srcr = &qcax_wm_src_ring, |
| .wm_dstr = &qcax_wm_dst_ring, |
| }; |
| |
| const struct ath10k_hw_clk_params qca6174_clk[ATH10K_HW_REFCLK_COUNT] = { |
| { |
| .refclk = 48000000, |
| .div = 0xe, |
| .rnfrac = 0x2aaa8, |
| .settle_time = 2400, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| { |
| .refclk = 19200000, |
| .div = 0x24, |
| .rnfrac = 0x2aaa8, |
| .settle_time = 960, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| { |
| .refclk = 24000000, |
| .div = 0x1d, |
| .rnfrac = 0x15551, |
| .settle_time = 1200, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| { |
| .refclk = 26000000, |
| .div = 0x1b, |
| .rnfrac = 0x4ec4, |
| .settle_time = 1300, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| { |
| .refclk = 37400000, |
| .div = 0x12, |
| .rnfrac = 0x34b49, |
| .settle_time = 1870, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| { |
| .refclk = 38400000, |
| .div = 0x12, |
| .rnfrac = 0x15551, |
| .settle_time = 1920, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| { |
| .refclk = 40000000, |
| .div = 0x12, |
| .rnfrac = 0x26665, |
| .settle_time = 2000, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| { |
| .refclk = 52000000, |
| .div = 0x1b, |
| .rnfrac = 0x4ec4, |
| .settle_time = 2600, |
| .refdiv = 0, |
| .outdiv = 1, |
| }, |
| }; |
| |
| void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey, |
| u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev) |
| { |
| u32 cc_fix = 0; |
| u32 rcc_fix = 0; |
| enum ath10k_hw_cc_wraparound_type wraparound_type; |
| |
| survey->filled |= SURVEY_INFO_TIME | |
| SURVEY_INFO_TIME_BUSY; |
| |
| wraparound_type = ar->hw_params.cc_wraparound_type; |
| |
| if (cc < cc_prev || rcc < rcc_prev) { |
| switch (wraparound_type) { |
| case ATH10K_HW_CC_WRAP_SHIFTED_ALL: |
| if (cc < cc_prev) { |
| cc_fix = 0x7fffffff; |
| survey->filled &= ~SURVEY_INFO_TIME_BUSY; |
| } |
| break; |
| case ATH10K_HW_CC_WRAP_SHIFTED_EACH: |
| if (cc < cc_prev) |
| cc_fix = 0x7fffffff; |
| |
| if (rcc < rcc_prev) |
| rcc_fix = 0x7fffffff; |
| break; |
| case ATH10K_HW_CC_WRAP_DISABLED: |
| break; |
| } |
| } |
| |
| cc -= cc_prev - cc_fix; |
| rcc -= rcc_prev - rcc_fix; |
| |
| survey->time = CCNT_TO_MSEC(ar, cc); |
| survey->time_busy = CCNT_TO_MSEC(ar, rcc); |
| } |
| |
| /* The firmware does not support setting the coverage class. Instead this |
| * function monitors and modifies the corresponding MAC registers. |
| */ |
| static void ath10k_hw_qca988x_set_coverage_class(struct ath10k *ar, |
| s16 value) |
| { |
| u32 slottime_reg; |
| u32 slottime; |
| u32 timeout_reg; |
| u32 ack_timeout; |
| u32 cts_timeout; |
| u32 phyclk_reg; |
| u32 phyclk; |
| u64 fw_dbglog_mask; |
| u32 fw_dbglog_level; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| /* Only modify registers if the core is started. */ |
| if ((ar->state != ATH10K_STATE_ON) && |
| (ar->state != ATH10K_STATE_RESTARTED)) { |
| spin_lock_bh(&ar->data_lock); |
| /* Store config value for when radio boots up */ |
| ar->fw_coverage.coverage_class = value; |
| spin_unlock_bh(&ar->data_lock); |
| goto unlock; |
| } |
| |
| /* Retrieve the current values of the two registers that need to be |
| * adjusted. |
| */ |
| slottime_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS + |
| WAVE1_PCU_GBL_IFS_SLOT); |
| timeout_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS + |
| WAVE1_PCU_ACK_CTS_TIMEOUT); |
| phyclk_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS + |
| WAVE1_PHYCLK); |
| phyclk = MS(phyclk_reg, WAVE1_PHYCLK_USEC) + 1; |
| |
| if (value < 0) |
| value = ar->fw_coverage.coverage_class; |
| |
| /* Break out if the coverage class and registers have the expected |
| * value. |
| */ |
| if (value == ar->fw_coverage.coverage_class && |
| slottime_reg == ar->fw_coverage.reg_slottime_conf && |
| timeout_reg == ar->fw_coverage.reg_ack_cts_timeout_conf && |
| phyclk_reg == ar->fw_coverage.reg_phyclk) |
| goto unlock; |
| |
| /* Store new initial register values from the firmware. */ |
| if (slottime_reg != ar->fw_coverage.reg_slottime_conf) |
| ar->fw_coverage.reg_slottime_orig = slottime_reg; |
| if (timeout_reg != ar->fw_coverage.reg_ack_cts_timeout_conf) |
| ar->fw_coverage.reg_ack_cts_timeout_orig = timeout_reg; |
| ar->fw_coverage.reg_phyclk = phyclk_reg; |
| |
| /* Calculate new value based on the (original) firmware calculation. */ |
| slottime_reg = ar->fw_coverage.reg_slottime_orig; |
| timeout_reg = ar->fw_coverage.reg_ack_cts_timeout_orig; |
| |
| /* Do some sanity checks on the slottime register. */ |
| if (slottime_reg % phyclk) { |
| ath10k_warn(ar, |
| "failed to set coverage class: expected integer microsecond value in register\n"); |
| |
| goto store_regs; |
| } |
| |
| slottime = MS(slottime_reg, WAVE1_PCU_GBL_IFS_SLOT); |
| slottime = slottime / phyclk; |
| if (slottime != 9 && slottime != 20) { |
| ath10k_warn(ar, |
| "failed to set coverage class: expected slot time of 9 or 20us in HW register. It is %uus.\n", |
| slottime); |
| |
| goto store_regs; |
| } |
| |
| /* Recalculate the register values by adding the additional propagation |
| * delay (3us per coverage class). |
| */ |
| |
| slottime = MS(slottime_reg, WAVE1_PCU_GBL_IFS_SLOT); |
| slottime += value * 3 * phyclk; |
| slottime = min_t(u32, slottime, WAVE1_PCU_GBL_IFS_SLOT_MAX); |
| slottime = SM(slottime, WAVE1_PCU_GBL_IFS_SLOT); |
| slottime_reg = (slottime_reg & ~WAVE1_PCU_GBL_IFS_SLOT_MASK) | slottime; |
| |
| /* Update ack timeout (lower halfword). */ |
| ack_timeout = MS(timeout_reg, WAVE1_PCU_ACK_CTS_TIMEOUT_ACK); |
| ack_timeout += 3 * value * phyclk; |
| ack_timeout = min_t(u32, ack_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_MAX); |
| ack_timeout = SM(ack_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_ACK); |
| |
| /* Update cts timeout (upper halfword). */ |
| cts_timeout = MS(timeout_reg, WAVE1_PCU_ACK_CTS_TIMEOUT_CTS); |
| cts_timeout += 3 * value * phyclk; |
| cts_timeout = min_t(u32, cts_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_MAX); |
| cts_timeout = SM(cts_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_CTS); |
| |
| timeout_reg = ack_timeout | cts_timeout; |
| |
| ath10k_hif_write32(ar, |
| WLAN_MAC_BASE_ADDRESS + WAVE1_PCU_GBL_IFS_SLOT, |
| slottime_reg); |
| ath10k_hif_write32(ar, |
| WLAN_MAC_BASE_ADDRESS + WAVE1_PCU_ACK_CTS_TIMEOUT, |
| timeout_reg); |
| |
| /* Ensure we have a debug level of WARN set for the case that the |
| * coverage class is larger than 0. This is important as we need to |
| * set the registers again if the firmware does an internal reset and |
| * this way we will be notified of the event. |
| */ |
| fw_dbglog_mask = ath10k_debug_get_fw_dbglog_mask(ar); |
| fw_dbglog_level = ath10k_debug_get_fw_dbglog_level(ar); |
| |
| if (value > 0) { |
| if (fw_dbglog_level > ATH10K_DBGLOG_LEVEL_WARN) |
| fw_dbglog_level = ATH10K_DBGLOG_LEVEL_WARN; |
| fw_dbglog_mask = ~0; |
| } |
| |
| ath10k_wmi_dbglog_cfg(ar, fw_dbglog_mask, fw_dbglog_level); |
| |
| store_regs: |
| /* After an error we will not retry setting the coverage class. */ |
| spin_lock_bh(&ar->data_lock); |
| ar->fw_coverage.coverage_class = value; |
| spin_unlock_bh(&ar->data_lock); |
| |
| ar->fw_coverage.reg_slottime_conf = slottime_reg; |
| ar->fw_coverage.reg_ack_cts_timeout_conf = timeout_reg; |
| |
| unlock: |
| mutex_unlock(&ar->conf_mutex); |
| } |
| |
| /** |
| * ath10k_hw_qca6174_enable_pll_clock() - enable the qca6174 hw pll clock |
| * @ar: the ath10k blob |
| * |
| * This function is very hardware specific, the clock initialization |
| * steps is very sensitive and could lead to unknown crash, so they |
| * should be done in sequence. |
| * |
| * *** Be aware if you planned to refactor them. *** |
| * |
| * Return: 0 if successfully enable the pll, otherwise EINVAL |
| */ |
| static int ath10k_hw_qca6174_enable_pll_clock(struct ath10k *ar) |
| { |
| int ret, wait_limit; |
| u32 clk_div_addr, pll_init_addr, speed_addr; |
| u32 addr, reg_val, mem_val; |
| struct ath10k_hw_params *hw; |
| const struct ath10k_hw_clk_params *hw_clk; |
| |
| hw = &ar->hw_params; |
| |
| if (ar->regs->core_clk_div_address == 0 || |
| ar->regs->cpu_pll_init_address == 0 || |
| ar->regs->cpu_speed_address == 0) |
| return -EINVAL; |
| |
| clk_div_addr = ar->regs->core_clk_div_address; |
| pll_init_addr = ar->regs->cpu_pll_init_address; |
| speed_addr = ar->regs->cpu_speed_address; |
| |
| /* Read efuse register to find out the right hw clock configuration */ |
| addr = (RTC_SOC_BASE_ADDRESS | EFUSE_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* sanitize if the hw refclk index is out of the boundary */ |
| if (MS(reg_val, EFUSE_XTAL_SEL) > ATH10K_HW_REFCLK_COUNT) |
| return -EINVAL; |
| |
| hw_clk = &hw->hw_clk[MS(reg_val, EFUSE_XTAL_SEL)]; |
| |
| /* Set the rnfrac and outdiv params to bb_pll register */ |
| addr = (RTC_SOC_BASE_ADDRESS | BB_PLL_CONFIG_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| reg_val &= ~(BB_PLL_CONFIG_FRAC_MASK | BB_PLL_CONFIG_OUTDIV_MASK); |
| reg_val |= (SM(hw_clk->rnfrac, BB_PLL_CONFIG_FRAC) | |
| SM(hw_clk->outdiv, BB_PLL_CONFIG_OUTDIV)); |
| ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* Set the correct settle time value to pll_settle register */ |
| addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_SETTLE_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| reg_val &= ~WLAN_PLL_SETTLE_TIME_MASK; |
| reg_val |= SM(hw_clk->settle_time, WLAN_PLL_SETTLE_TIME); |
| ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* Set the clock_ctrl div to core_clk_ctrl register */ |
| addr = (RTC_SOC_BASE_ADDRESS | SOC_CORE_CLK_CTRL_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| reg_val &= ~SOC_CORE_CLK_CTRL_DIV_MASK; |
| reg_val |= SM(1, SOC_CORE_CLK_CTRL_DIV); |
| ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* Set the clock_div register */ |
| mem_val = 1; |
| ret = ath10k_bmi_write_memory(ar, clk_div_addr, &mem_val, |
| sizeof(mem_val)); |
| if (ret) |
| return -EINVAL; |
| |
| /* Configure the pll_control register */ |
| addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| reg_val |= (SM(hw_clk->refdiv, WLAN_PLL_CONTROL_REFDIV) | |
| SM(hw_clk->div, WLAN_PLL_CONTROL_DIV) | |
| SM(1, WLAN_PLL_CONTROL_NOPWD)); |
| ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* busy wait (max 1s) the rtc_sync status register indicate ready */ |
| wait_limit = 100000; |
| addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET); |
| do { |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) |
| break; |
| |
| wait_limit--; |
| udelay(10); |
| |
| } while (wait_limit > 0); |
| |
| if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) |
| return -EINVAL; |
| |
| /* Unset the pll_bypass in pll_control register */ |
| addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| reg_val &= ~WLAN_PLL_CONTROL_BYPASS_MASK; |
| reg_val |= SM(0, WLAN_PLL_CONTROL_BYPASS); |
| ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* busy wait (max 1s) the rtc_sync status register indicate ready */ |
| wait_limit = 100000; |
| addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET); |
| do { |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) |
| break; |
| |
| wait_limit--; |
| udelay(10); |
| |
| } while (wait_limit > 0); |
| |
| if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING)) |
| return -EINVAL; |
| |
| /* Enable the hardware cpu clock register */ |
| addr = (RTC_SOC_BASE_ADDRESS | SOC_CPU_CLOCK_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| reg_val &= ~SOC_CPU_CLOCK_STANDARD_MASK; |
| reg_val |= SM(1, SOC_CPU_CLOCK_STANDARD); |
| ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* unset the nopwd from pll_control register */ |
| addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET); |
| ret = ath10k_bmi_read_soc_reg(ar, addr, ®_val); |
| if (ret) |
| return -EINVAL; |
| |
| reg_val &= ~WLAN_PLL_CONTROL_NOPWD_MASK; |
| ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val); |
| if (ret) |
| return -EINVAL; |
| |
| /* enable the pll_init register */ |
| mem_val = 1; |
| ret = ath10k_bmi_write_memory(ar, pll_init_addr, &mem_val, |
| sizeof(mem_val)); |
| if (ret) |
| return -EINVAL; |
| |
| /* set the target clock frequency to speed register */ |
| ret = ath10k_bmi_write_memory(ar, speed_addr, &hw->target_cpu_freq, |
| sizeof(hw->target_cpu_freq)); |
| if (ret) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* Program CPU_ADDR_MSB to allow different memory |
| * region access. |
| */ |
| static void ath10k_hw_map_target_mem(struct ath10k *ar, u32 msb) |
| { |
| u32 address = SOC_CORE_BASE_ADDRESS + FW_RAM_CONFIG_ADDRESS; |
| |
| ath10k_hif_write32(ar, address, msb); |
| } |
| |
| /* 1. Write to memory region of target, such as IRAM adn DRAM. |
| * 2. Target address( 0 ~ 00100000 & 0x00400000~0x00500000) |
| * can be written directly. See ath10k_pci_targ_cpu_to_ce_addr() too. |
| * 3. In order to access the region other than the above, |
| * we need to set the value of register CPU_ADDR_MSB. |
| * 4. Target memory access space is limited to 1M size. If the size is larger |
| * than 1M, need to split it and program CPU_ADDR_MSB accordingly. |
| */ |
| static int ath10k_hw_diag_segment_msb_download(struct ath10k *ar, |
| const void *buffer, |
| u32 address, |
| u32 length) |
| { |
| u32 addr = address & REGION_ACCESS_SIZE_MASK; |
| int ret, remain_size, size; |
| const u8 *buf; |
| |
| ath10k_hw_map_target_mem(ar, CPU_ADDR_MSB_REGION_VAL(address)); |
| |
| if (addr + length > REGION_ACCESS_SIZE_LIMIT) { |
| size = REGION_ACCESS_SIZE_LIMIT - addr; |
| remain_size = length - size; |
| |
| ret = ath10k_hif_diag_write(ar, address, buffer, size); |
| if (ret) { |
| ath10k_warn(ar, |
| "failed to download the first %d bytes segment to address:0x%x: %d\n", |
| size, address, ret); |
| goto done; |
| } |
| |
| /* Change msb to the next memory region*/ |
| ath10k_hw_map_target_mem(ar, |
| CPU_ADDR_MSB_REGION_VAL(address) + 1); |
| buf = buffer + size; |
| ret = ath10k_hif_diag_write(ar, |
| address & ~REGION_ACCESS_SIZE_MASK, |
| buf, remain_size); |
| if (ret) { |
| ath10k_warn(ar, |
| "failed to download the second %d bytes segment to address:0x%x: %d\n", |
| remain_size, |
| address & ~REGION_ACCESS_SIZE_MASK, |
| ret); |
| goto done; |
| } |
| } else { |
| ret = ath10k_hif_diag_write(ar, address, buffer, length); |
| if (ret) { |
| ath10k_warn(ar, |
| "failed to download the only %d bytes segment to address:0x%x: %d\n", |
| length, address, ret); |
| goto done; |
| } |
| } |
| |
| done: |
| /* Change msb to DRAM */ |
| ath10k_hw_map_target_mem(ar, |
| CPU_ADDR_MSB_REGION_VAL(DRAM_BASE_ADDRESS)); |
| return ret; |
| } |
| |
| static int ath10k_hw_diag_segment_download(struct ath10k *ar, |
| const void *buffer, |
| u32 address, |
| u32 length) |
| { |
| if (address >= DRAM_BASE_ADDRESS + REGION_ACCESS_SIZE_LIMIT) |
| /* Needs to change MSB for memory write */ |
| return ath10k_hw_diag_segment_msb_download(ar, buffer, |
| address, length); |
| else |
| return ath10k_hif_diag_write(ar, address, buffer, length); |
| } |
| |
| int ath10k_hw_diag_fast_download(struct ath10k *ar, |
| u32 address, |
| const void *buffer, |
| u32 length) |
| { |
| const u8 *buf = buffer; |
| bool sgmt_end = false; |
| u32 base_addr = 0; |
| u32 base_len = 0; |
| u32 left = 0; |
| struct bmi_segmented_file_header *hdr; |
| struct bmi_segmented_metadata *metadata; |
| int ret = 0; |
| |
| if (length < sizeof(*hdr)) |
| return -EINVAL; |
| |
| /* check firmware header. If it has no correct magic number |
| * or it's compressed, returns error. |
| */ |
| hdr = (struct bmi_segmented_file_header *)buf; |
| if (__le32_to_cpu(hdr->magic_num) != BMI_SGMTFILE_MAGIC_NUM) { |
| ath10k_dbg(ar, ATH10K_DBG_BOOT, |
| "Not a supported firmware, magic_num:0x%x\n", |
| hdr->magic_num); |
| return -EINVAL; |
| } |
| |
| if (hdr->file_flags != 0) { |
| ath10k_dbg(ar, ATH10K_DBG_BOOT, |
| "Not a supported firmware, file_flags:0x%x\n", |
| hdr->file_flags); |
| return -EINVAL; |
| } |
| |
| metadata = (struct bmi_segmented_metadata *)hdr->data; |
| left = length - sizeof(*hdr); |
| |
| while (left > 0) { |
| if (left < sizeof(*metadata)) { |
| ath10k_warn(ar, "firmware segment is truncated: %d\n", |
| left); |
| ret = -EINVAL; |
| break; |
| } |
| base_addr = __le32_to_cpu(metadata->addr); |
| base_len = __le32_to_cpu(metadata->length); |
| buf = metadata->data; |
| left -= sizeof(*metadata); |
| |
| switch (base_len) { |
| case BMI_SGMTFILE_BEGINADDR: |
| /* base_addr is the start address to run */ |
| ret = ath10k_bmi_set_start(ar, base_addr); |
| base_len = 0; |
| break; |
| case BMI_SGMTFILE_DONE: |
| /* no more segment */ |
| base_len = 0; |
| sgmt_end = true; |
| ret = 0; |
| break; |
| case BMI_SGMTFILE_BDDATA: |
| case BMI_SGMTFILE_EXEC: |
| ath10k_warn(ar, |
| "firmware has unsupported segment:%d\n", |
| base_len); |
| ret = -EINVAL; |
| break; |
| default: |
| if (base_len > left) { |
| /* sanity check */ |
| ath10k_warn(ar, |
| "firmware has invalid segment length, %d > %d\n", |
| base_len, left); |
| ret = -EINVAL; |
| break; |
| } |
| |
| ret = ath10k_hw_diag_segment_download(ar, |
| buf, |
| base_addr, |
| base_len); |
| |
| if (ret) |
| ath10k_warn(ar, |
| "failed to download firmware via diag interface:%d\n", |
| ret); |
| break; |
| } |
| |
| if (ret || sgmt_end) |
| break; |
| |
| metadata = (struct bmi_segmented_metadata *)(buf + base_len); |
| left -= base_len; |
| } |
| |
| if (ret == 0) |
| ath10k_dbg(ar, ATH10K_DBG_BOOT, |
| "boot firmware fast diag download successfully.\n"); |
| return ret; |
| } |
| |
| static int ath10k_htt_tx_rssi_enable(struct htt_resp *resp) |
| { |
| return (resp->data_tx_completion.flags2 & HTT_TX_CMPL_FLAG_DATA_RSSI); |
| } |
| |
| static int ath10k_htt_tx_rssi_enable_wcn3990(struct htt_resp *resp) |
| { |
| return (resp->data_tx_completion.flags2 & |
| HTT_TX_DATA_RSSI_ENABLE_WCN3990); |
| } |
| |
| static int ath10k_get_htt_tx_data_rssi_pad(struct htt_resp *resp) |
| { |
| struct htt_data_tx_completion_ext extd; |
| int pad_bytes = 0; |
| |
| if (resp->data_tx_completion.flags2 & HTT_TX_DATA_APPEND_RETRIES) |
| pad_bytes += sizeof(extd.a_retries) / |
| sizeof(extd.msdus_rssi[0]); |
| |
| if (resp->data_tx_completion.flags2 & HTT_TX_DATA_APPEND_TIMESTAMP) |
| pad_bytes += sizeof(extd.t_stamp) / sizeof(extd.msdus_rssi[0]); |
| |
| return pad_bytes; |
| } |
| |
| const struct ath10k_hw_ops qca988x_ops = { |
| .set_coverage_class = ath10k_hw_qca988x_set_coverage_class, |
| .is_rssi_enable = ath10k_htt_tx_rssi_enable, |
| }; |
| |
| static int ath10k_qca99x0_rx_desc_get_l3_pad_bytes(struct htt_rx_desc *rxd) |
| { |
| return MS(__le32_to_cpu(rxd->msdu_end.qca99x0.info1), |
| RX_MSDU_END_INFO1_L3_HDR_PAD); |
| } |
| |
| static bool ath10k_qca99x0_rx_desc_msdu_limit_error(struct htt_rx_desc *rxd) |
| { |
| return !!(rxd->msdu_end.common.info0 & |
| __cpu_to_le32(RX_MSDU_END_INFO0_MSDU_LIMIT_ERR)); |
| } |
| |
| const struct ath10k_hw_ops qca99x0_ops = { |
| .rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes, |
| .rx_desc_get_msdu_limit_error = ath10k_qca99x0_rx_desc_msdu_limit_error, |
| .is_rssi_enable = ath10k_htt_tx_rssi_enable, |
| }; |
| |
| const struct ath10k_hw_ops qca6174_ops = { |
| .set_coverage_class = ath10k_hw_qca988x_set_coverage_class, |
| .enable_pll_clk = ath10k_hw_qca6174_enable_pll_clock, |
| .is_rssi_enable = ath10k_htt_tx_rssi_enable, |
| }; |
| |
| const struct ath10k_hw_ops qca6174_sdio_ops = { |
| .enable_pll_clk = ath10k_hw_qca6174_enable_pll_clock, |
| }; |
| |
| const struct ath10k_hw_ops wcn3990_ops = { |
| .tx_data_rssi_pad_bytes = ath10k_get_htt_tx_data_rssi_pad, |
| .is_rssi_enable = ath10k_htt_tx_rssi_enable_wcn3990, |
| }; |