| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. |
| * Copyright (C) 2013 Imagination Technologies Ltd. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| |
| #include <asm/mipsregs.h> |
| #include <asm/mipsmtregs.h> |
| #include <asm/mips_mt.h> |
| #include <asm/vpe.h> |
| |
| static int major; |
| |
| /* The number of TCs and VPEs physically available on the core */ |
| static int hw_tcs, hw_vpes; |
| |
| /* We are prepared so configure and start the VPE... */ |
| int vpe_run(struct vpe *v) |
| { |
| unsigned long flags, val, dmt_flag; |
| struct vpe_notifications *notifier; |
| unsigned int vpeflags; |
| struct tc *t; |
| |
| /* check we are the Master VPE */ |
| local_irq_save(flags); |
| val = read_c0_vpeconf0(); |
| if (!(val & VPECONF0_MVP)) { |
| pr_warn("VPE loader: only Master VPE's are able to config MT\n"); |
| local_irq_restore(flags); |
| |
| return -1; |
| } |
| |
| dmt_flag = dmt(); |
| vpeflags = dvpe(); |
| |
| if (list_empty(&v->tc)) { |
| evpe(vpeflags); |
| emt(dmt_flag); |
| local_irq_restore(flags); |
| |
| pr_warn("VPE loader: No TC's associated with VPE %d\n", |
| v->minor); |
| |
| return -ENOEXEC; |
| } |
| |
| t = list_first_entry(&v->tc, struct tc, tc); |
| |
| /* Put MVPE's into 'configuration state' */ |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| settc(t->index); |
| |
| /* should check it is halted, and not activated */ |
| if ((read_tc_c0_tcstatus() & TCSTATUS_A) || |
| !(read_tc_c0_tchalt() & TCHALT_H)) { |
| evpe(vpeflags); |
| emt(dmt_flag); |
| local_irq_restore(flags); |
| |
| pr_warn("VPE loader: TC %d is already active!\n", |
| t->index); |
| |
| return -ENOEXEC; |
| } |
| |
| /* |
| * Write the address we want it to start running from in the TCPC |
| * register. |
| */ |
| write_tc_c0_tcrestart((unsigned long)v->__start); |
| write_tc_c0_tccontext((unsigned long)0); |
| |
| /* |
| * Mark the TC as activated, not interrupt exempt and not dynamically |
| * allocatable |
| */ |
| val = read_tc_c0_tcstatus(); |
| val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A; |
| write_tc_c0_tcstatus(val); |
| |
| write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H); |
| |
| /* |
| * We don't pass the memsize here, so VPE programs need to be |
| * compiled with DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined. |
| */ |
| mttgpr($7, 0); |
| mttgpr($6, v->ntcs); |
| |
| /* set up VPE1 */ |
| /* |
| * bind the TC to VPE 1 as late as possible so we only have the final |
| * VPE registers to set up, and so an EJTAG probe can trigger on it |
| */ |
| write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1); |
| |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA)); |
| |
| back_to_back_c0_hazard(); |
| |
| /* Set up the XTC bit in vpeconf0 to point at our tc */ |
| write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) |
| | (t->index << VPECONF0_XTC_SHIFT)); |
| |
| back_to_back_c0_hazard(); |
| |
| /* enable this VPE */ |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); |
| |
| /* clear out any left overs from a previous program */ |
| write_vpe_c0_status(0); |
| write_vpe_c0_cause(0); |
| |
| /* take system out of configuration state */ |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| /* |
| * SMVP kernels manage VPE enable independently, but uniprocessor |
| * kernels need to turn it on, even if that wasn't the pre-dvpe() state. |
| */ |
| #ifdef CONFIG_SMP |
| evpe(vpeflags); |
| #else |
| evpe(EVPE_ENABLE); |
| #endif |
| emt(dmt_flag); |
| local_irq_restore(flags); |
| |
| list_for_each_entry(notifier, &v->notify, list) |
| notifier->start(VPE_MODULE_MINOR); |
| |
| return 0; |
| } |
| |
| void cleanup_tc(struct tc *tc) |
| { |
| unsigned long flags; |
| unsigned int mtflags, vpflags; |
| int tmp; |
| |
| local_irq_save(flags); |
| mtflags = dmt(); |
| vpflags = dvpe(); |
| /* Put MVPE's into 'configuration state' */ |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| settc(tc->index); |
| tmp = read_tc_c0_tcstatus(); |
| |
| /* mark not allocated and not dynamically allocatable */ |
| tmp &= ~(TCSTATUS_A | TCSTATUS_DA); |
| tmp |= TCSTATUS_IXMT; /* interrupt exempt */ |
| write_tc_c0_tcstatus(tmp); |
| |
| write_tc_c0_tchalt(TCHALT_H); |
| mips_ihb(); |
| |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| evpe(vpflags); |
| emt(mtflags); |
| local_irq_restore(flags); |
| } |
| |
| /* module wrapper entry points */ |
| /* give me a vpe */ |
| void *vpe_alloc(void) |
| { |
| int i; |
| struct vpe *v; |
| |
| /* find a vpe */ |
| for (i = 1; i < MAX_VPES; i++) { |
| v = get_vpe(i); |
| if (v != NULL) { |
| v->state = VPE_STATE_INUSE; |
| return v; |
| } |
| } |
| return NULL; |
| } |
| EXPORT_SYMBOL(vpe_alloc); |
| |
| /* start running from here */ |
| int vpe_start(void *vpe, unsigned long start) |
| { |
| struct vpe *v = vpe; |
| |
| v->__start = start; |
| return vpe_run(v); |
| } |
| EXPORT_SYMBOL(vpe_start); |
| |
| /* halt it for now */ |
| int vpe_stop(void *vpe) |
| { |
| struct vpe *v = vpe; |
| struct tc *t; |
| unsigned int evpe_flags; |
| |
| evpe_flags = dvpe(); |
| |
| t = list_entry(v->tc.next, struct tc, tc); |
| if (t != NULL) { |
| settc(t->index); |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); |
| } |
| |
| evpe(evpe_flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(vpe_stop); |
| |
| /* I've done with it thank you */ |
| int vpe_free(void *vpe) |
| { |
| struct vpe *v = vpe; |
| struct tc *t; |
| unsigned int evpe_flags; |
| |
| t = list_entry(v->tc.next, struct tc, tc); |
| if (t == NULL) |
| return -ENOEXEC; |
| |
| evpe_flags = dvpe(); |
| |
| /* Put MVPE's into 'configuration state' */ |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| settc(t->index); |
| write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); |
| |
| /* halt the TC */ |
| write_tc_c0_tchalt(TCHALT_H); |
| mips_ihb(); |
| |
| /* mark the TC unallocated */ |
| write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A); |
| |
| v->state = VPE_STATE_UNUSED; |
| |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| evpe(evpe_flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(vpe_free); |
| |
| static ssize_t store_kill(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct vpe *vpe = get_vpe(aprp_cpu_index()); |
| struct vpe_notifications *notifier; |
| |
| list_for_each_entry(notifier, &vpe->notify, list) |
| notifier->stop(aprp_cpu_index()); |
| |
| release_progmem(vpe->load_addr); |
| cleanup_tc(get_tc(aprp_cpu_index())); |
| vpe_stop(vpe); |
| vpe_free(vpe); |
| |
| return len; |
| } |
| static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill); |
| |
| static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr, |
| char *buf) |
| { |
| struct vpe *vpe = get_vpe(aprp_cpu_index()); |
| |
| return sprintf(buf, "%d\n", vpe->ntcs); |
| } |
| |
| static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct vpe *vpe = get_vpe(aprp_cpu_index()); |
| unsigned long new; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &new); |
| if (ret < 0) |
| return ret; |
| |
| if (new == 0 || new > (hw_tcs - aprp_cpu_index())) |
| return -EINVAL; |
| |
| vpe->ntcs = new; |
| |
| return len; |
| } |
| static DEVICE_ATTR_RW(ntcs); |
| |
| static struct attribute *vpe_attrs[] = { |
| &dev_attr_kill.attr, |
| &dev_attr_ntcs.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(vpe); |
| |
| static void vpe_device_release(struct device *cd) |
| { |
| } |
| |
| static struct class vpe_class = { |
| .name = "vpe", |
| .dev_release = vpe_device_release, |
| .dev_groups = vpe_groups, |
| }; |
| |
| static struct device vpe_device; |
| |
| int __init vpe_module_init(void) |
| { |
| unsigned int mtflags, vpflags; |
| unsigned long flags, val; |
| struct vpe *v = NULL; |
| struct tc *t; |
| int tc, err; |
| |
| if (!cpu_has_mipsmt) { |
| pr_warn("VPE loader: not a MIPS MT capable processor\n"); |
| return -ENODEV; |
| } |
| |
| if (vpelimit == 0) { |
| pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n" |
| "Pass maxvpes=<n> argument as kernel argument\n"); |
| |
| return -ENODEV; |
| } |
| |
| if (aprp_cpu_index() == 0) { |
| pr_warn("No TCs reserved for AP/SP, not initialize VPE loader\n" |
| "Pass maxtcs=<n> argument as kernel argument\n"); |
| |
| return -ENODEV; |
| } |
| |
| major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops); |
| if (major < 0) { |
| pr_warn("VPE loader: unable to register character device\n"); |
| return major; |
| } |
| |
| err = class_register(&vpe_class); |
| if (err) { |
| pr_err("vpe_class registration failed\n"); |
| goto out_chrdev; |
| } |
| |
| device_initialize(&vpe_device); |
| vpe_device.class = &vpe_class; |
| vpe_device.parent = NULL; |
| dev_set_name(&vpe_device, "vpe1"); |
| vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR); |
| err = device_add(&vpe_device); |
| if (err) { |
| pr_err("Adding vpe_device failed\n"); |
| goto out_class; |
| } |
| |
| local_irq_save(flags); |
| mtflags = dmt(); |
| vpflags = dvpe(); |
| |
| /* Put MVPE's into 'configuration state' */ |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| val = read_c0_mvpconf0(); |
| hw_tcs = (val & MVPCONF0_PTC) + 1; |
| hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; |
| |
| for (tc = aprp_cpu_index(); tc < hw_tcs; tc++) { |
| /* |
| * Must re-enable multithreading temporarily or in case we |
| * reschedule send IPIs or similar we might hang. |
| */ |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| evpe(vpflags); |
| emt(mtflags); |
| local_irq_restore(flags); |
| t = alloc_tc(tc); |
| if (!t) { |
| err = -ENOMEM; |
| goto out_dev; |
| } |
| |
| local_irq_save(flags); |
| mtflags = dmt(); |
| vpflags = dvpe(); |
| set_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| /* VPE's */ |
| if (tc < hw_tcs) { |
| settc(tc); |
| |
| v = alloc_vpe(tc); |
| if (v == NULL) { |
| pr_warn("VPE: unable to allocate VPE\n"); |
| goto out_reenable; |
| } |
| |
| v->ntcs = hw_tcs - aprp_cpu_index(); |
| |
| /* add the tc to the list of this vpe's tc's. */ |
| list_add(&t->tc, &v->tc); |
| |
| /* deactivate all but vpe0 */ |
| if (tc >= aprp_cpu_index()) { |
| unsigned long tmp = read_vpe_c0_vpeconf0(); |
| |
| tmp &= ~VPECONF0_VPA; |
| |
| /* master VPE */ |
| tmp |= VPECONF0_MVP; |
| write_vpe_c0_vpeconf0(tmp); |
| } |
| |
| /* disable multi-threading with TC's */ |
| write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & |
| ~VPECONTROL_TE); |
| |
| if (tc >= vpelimit) { |
| /* |
| * Set config to be the same as vpe0, |
| * particularly kseg0 coherency alg |
| */ |
| write_vpe_c0_config(read_c0_config()); |
| } |
| } |
| |
| /* TC's */ |
| t->pvpe = v; /* set the parent vpe */ |
| |
| if (tc >= aprp_cpu_index()) { |
| unsigned long tmp; |
| |
| settc(tc); |
| |
| /* |
| * A TC that is bound to any other VPE gets bound to |
| * VPE0, ideally I'd like to make it homeless but it |
| * doesn't appear to let me bind a TC to a non-existent |
| * VPE. Which is perfectly reasonable. |
| * |
| * The (un)bound state is visible to an EJTAG probe so |
| * may notify GDB... |
| */ |
| tmp = read_tc_c0_tcbind(); |
| if (tmp & TCBIND_CURVPE) { |
| /* tc is bound >vpe0 */ |
| write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE); |
| |
| t->pvpe = get_vpe(0); /* set the parent vpe */ |
| } |
| |
| /* halt the TC */ |
| write_tc_c0_tchalt(TCHALT_H); |
| mips_ihb(); |
| |
| tmp = read_tc_c0_tcstatus(); |
| |
| /* mark not activated and not dynamically allocatable */ |
| tmp &= ~(TCSTATUS_A | TCSTATUS_DA); |
| tmp |= TCSTATUS_IXMT; /* interrupt exempt */ |
| write_tc_c0_tcstatus(tmp); |
| } |
| } |
| |
| out_reenable: |
| /* release config state */ |
| clear_c0_mvpcontrol(MVPCONTROL_VPC); |
| |
| evpe(vpflags); |
| emt(mtflags); |
| local_irq_restore(flags); |
| |
| return 0; |
| |
| out_dev: |
| device_del(&vpe_device); |
| |
| out_class: |
| put_device(&vpe_device); |
| class_unregister(&vpe_class); |
| |
| out_chrdev: |
| unregister_chrdev(major, VPE_MODULE_NAME); |
| |
| return err; |
| } |
| |
| void __exit vpe_module_exit(void) |
| { |
| struct vpe *v, *n; |
| |
| device_unregister(&vpe_device); |
| class_unregister(&vpe_class); |
| unregister_chrdev(major, VPE_MODULE_NAME); |
| |
| /* No locking needed here */ |
| list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) { |
| if (v->state != VPE_STATE_UNUSED) |
| release_vpe(v); |
| } |
| } |