| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Generic platform ehci driver |
| * |
| * Copyright 2007 Steven Brown <sbrown@cortland.com> |
| * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> |
| * Copyright 2014 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Derived from the ohci-ssb driver |
| * Copyright 2007 Michael Buesch <m@bues.ch> |
| * |
| * Derived from the EHCI-PCI driver |
| * Copyright (c) 2000-2004 by David Brownell |
| * |
| * Derived from the ohci-pci driver |
| * Copyright 1999 Roman Weissgaerber |
| * Copyright 2000-2002 David Brownell |
| * Copyright 1999 Linus Torvalds |
| * Copyright 1999 Gregory P. Smith |
| */ |
| #include <linux/acpi.h> |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/hrtimer.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/reset.h> |
| #include <linux/sys_soc.h> |
| #include <linux/timer.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/ehci_pdriver.h> |
| #include <linux/usb/of.h> |
| |
| #include "ehci.h" |
| |
| #define DRIVER_DESC "EHCI generic platform driver" |
| #define EHCI_MAX_CLKS 4 |
| #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) |
| |
| #define BCM_USB_FIFO_THRESHOLD 0x00800040 |
| |
| struct ehci_platform_priv { |
| struct clk *clks[EHCI_MAX_CLKS]; |
| struct reset_control *rsts; |
| bool reset_on_resume; |
| bool quirk_poll; |
| struct timer_list poll_timer; |
| struct delayed_work poll_work; |
| }; |
| |
| static int ehci_platform_reset(struct usb_hcd *hcd) |
| { |
| struct platform_device *pdev = to_platform_device(hcd->self.controller); |
| struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev); |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); |
| int retval; |
| |
| ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; |
| |
| if (pdata->pre_setup) { |
| retval = pdata->pre_setup(hcd); |
| if (retval < 0) |
| return retval; |
| } |
| |
| ehci->caps = hcd->regs + pdata->caps_offset; |
| retval = ehci_setup(hcd); |
| if (retval) |
| return retval; |
| |
| if (pdata->no_io_watchdog) |
| ehci->need_io_watchdog = 0; |
| |
| if (of_device_is_compatible(pdev->dev.of_node, "brcm,xgs-iproc-ehci")) |
| ehci_writel(ehci, BCM_USB_FIFO_THRESHOLD, |
| &ehci->regs->brcm_insnreg[1]); |
| |
| return 0; |
| } |
| |
| static int ehci_platform_power_on(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); |
| int clk, ret; |
| |
| for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) { |
| ret = clk_prepare_enable(priv->clks[clk]); |
| if (ret) |
| goto err_disable_clks; |
| } |
| |
| return 0; |
| |
| err_disable_clks: |
| while (--clk >= 0) |
| clk_disable_unprepare(priv->clks[clk]); |
| |
| return ret; |
| } |
| |
| static void ehci_platform_power_off(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); |
| int clk; |
| |
| for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) |
| if (priv->clks[clk]) |
| clk_disable_unprepare(priv->clks[clk]); |
| } |
| |
| static struct hc_driver __read_mostly ehci_platform_hc_driver; |
| |
| static const struct ehci_driver_overrides platform_overrides __initconst = { |
| .reset = ehci_platform_reset, |
| .extra_priv_size = sizeof(struct ehci_platform_priv), |
| }; |
| |
| static struct usb_ehci_pdata ehci_platform_defaults = { |
| .power_on = ehci_platform_power_on, |
| .power_suspend = ehci_platform_power_off, |
| .power_off = ehci_platform_power_off, |
| }; |
| |
| /** |
| * quirk_poll_check_port_status - Poll port_status if the device sticks |
| * @ehci: the ehci hcd pointer |
| * |
| * Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting |
| * stuck very rarely after a full/low usb device was disconnected. To |
| * detect such a situation, the controllers require a special way which poll |
| * the EHCI PORTSC register. |
| * |
| * Return: true if the controller's port_status indicated getting stuck |
| */ |
| static bool quirk_poll_check_port_status(struct ehci_hcd *ehci) |
| { |
| u32 port_status = ehci_readl(ehci, &ehci->regs->port_status[0]); |
| |
| if (!(port_status & PORT_OWNER) && |
| (port_status & PORT_POWER) && |
| !(port_status & PORT_CONNECT) && |
| (port_status & PORT_LS_MASK)) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * quirk_poll_rebind_companion - rebind comanion device to recover |
| * @ehci: the ehci hcd pointer |
| * |
| * Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to be getting |
| * stuck very rarely after a full/low usb device was disconnected. To |
| * recover from such a situation, the controllers require changing the OHCI |
| * functional state. |
| */ |
| static void quirk_poll_rebind_companion(struct ehci_hcd *ehci) |
| { |
| struct device *companion_dev; |
| struct usb_hcd *hcd = ehci_to_hcd(ehci); |
| |
| companion_dev = usb_of_get_companion_dev(hcd->self.controller); |
| if (!companion_dev) |
| return; |
| |
| device_release_driver(companion_dev); |
| if (device_attach(companion_dev) < 0) |
| ehci_err(ehci, "%s: failed\n", __func__); |
| |
| put_device(companion_dev); |
| } |
| |
| static void quirk_poll_work(struct work_struct *work) |
| { |
| struct ehci_platform_priv *priv = |
| container_of(to_delayed_work(work), struct ehci_platform_priv, |
| poll_work); |
| struct ehci_hcd *ehci = container_of((void *)priv, struct ehci_hcd, |
| priv); |
| |
| /* check the status twice to reduce misdetection rate */ |
| if (!quirk_poll_check_port_status(ehci)) |
| return; |
| udelay(10); |
| if (!quirk_poll_check_port_status(ehci)) |
| return; |
| |
| ehci_dbg(ehci, "%s: detected getting stuck. rebind now!\n", __func__); |
| quirk_poll_rebind_companion(ehci); |
| } |
| |
| static void quirk_poll_timer(struct timer_list *t) |
| { |
| struct ehci_platform_priv *priv = from_timer(priv, t, poll_timer); |
| struct ehci_hcd *ehci = container_of((void *)priv, struct ehci_hcd, |
| priv); |
| |
| if (quirk_poll_check_port_status(ehci)) { |
| /* |
| * Now scheduling the work for testing the port more. Note that |
| * updating the status is possible to be delayed when |
| * reconnection. So, this uses delayed work with 5 ms delay |
| * to avoid misdetection. |
| */ |
| schedule_delayed_work(&priv->poll_work, msecs_to_jiffies(5)); |
| } |
| |
| mod_timer(&priv->poll_timer, jiffies + HZ); |
| } |
| |
| static void quirk_poll_init(struct ehci_platform_priv *priv) |
| { |
| INIT_DELAYED_WORK(&priv->poll_work, quirk_poll_work); |
| timer_setup(&priv->poll_timer, quirk_poll_timer, 0); |
| mod_timer(&priv->poll_timer, jiffies + HZ); |
| } |
| |
| static void quirk_poll_end(struct ehci_platform_priv *priv) |
| { |
| del_timer_sync(&priv->poll_timer); |
| cancel_delayed_work(&priv->poll_work); |
| } |
| |
| static const struct soc_device_attribute quirk_poll_match[] = { |
| { .family = "R-Car Gen3" }, |
| { /* sentinel*/ } |
| }; |
| |
| static int ehci_platform_probe(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd; |
| struct resource *res_mem; |
| struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); |
| struct ehci_platform_priv *priv; |
| struct ehci_hcd *ehci; |
| int err, irq, clk = 0; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| /* |
| * Use reasonable defaults so platforms don't have to provide these |
| * with DT probing on ARM. |
| */ |
| if (!pdata) |
| pdata = &ehci_platform_defaults; |
| |
| err = dma_coerce_mask_and_coherent(&dev->dev, |
| pdata->dma_mask_64 ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&dev->dev, "Error: DMA mask configuration failed\n"); |
| return err; |
| } |
| |
| irq = platform_get_irq(dev, 0); |
| if (irq < 0) |
| return irq; |
| |
| hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, |
| dev_name(&dev->dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| platform_set_drvdata(dev, hcd); |
| dev->dev.platform_data = pdata; |
| priv = hcd_to_ehci_priv(hcd); |
| ehci = hcd_to_ehci(hcd); |
| |
| if (pdata == &ehci_platform_defaults && dev->dev.of_node) { |
| if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) |
| ehci->big_endian_mmio = 1; |
| |
| if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) |
| ehci->big_endian_desc = 1; |
| |
| if (of_property_read_bool(dev->dev.of_node, "big-endian")) |
| ehci->big_endian_mmio = ehci->big_endian_desc = 1; |
| |
| if (of_property_read_bool(dev->dev.of_node, "spurious-oc")) |
| ehci->spurious_oc = 1; |
| |
| if (of_property_read_bool(dev->dev.of_node, |
| "needs-reset-on-resume")) |
| priv->reset_on_resume = true; |
| |
| if (of_property_read_bool(dev->dev.of_node, |
| "has-transaction-translator")) |
| hcd->has_tt = 1; |
| |
| if (of_device_is_compatible(dev->dev.of_node, |
| "aspeed,ast2500-ehci") || |
| of_device_is_compatible(dev->dev.of_node, |
| "aspeed,ast2600-ehci")) |
| ehci->is_aspeed = 1; |
| |
| if (soc_device_match(quirk_poll_match)) |
| priv->quirk_poll = true; |
| |
| for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { |
| priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); |
| if (IS_ERR(priv->clks[clk])) { |
| err = PTR_ERR(priv->clks[clk]); |
| if (err == -EPROBE_DEFER) |
| goto err_put_clks; |
| priv->clks[clk] = NULL; |
| break; |
| } |
| } |
| } |
| |
| priv->rsts = devm_reset_control_array_get_optional_shared(&dev->dev); |
| if (IS_ERR(priv->rsts)) { |
| err = PTR_ERR(priv->rsts); |
| goto err_put_clks; |
| } |
| |
| err = reset_control_deassert(priv->rsts); |
| if (err) |
| goto err_put_clks; |
| |
| if (pdata->big_endian_desc) |
| ehci->big_endian_desc = 1; |
| if (pdata->big_endian_mmio) |
| ehci->big_endian_mmio = 1; |
| if (pdata->has_tt) |
| hcd->has_tt = 1; |
| if (pdata->reset_on_resume) |
| priv->reset_on_resume = true; |
| if (pdata->spurious_oc) |
| ehci->spurious_oc = 1; |
| |
| #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO |
| if (ehci->big_endian_mmio) { |
| dev_err(&dev->dev, |
| "Error: CONFIG_USB_EHCI_BIG_ENDIAN_MMIO not set\n"); |
| err = -EINVAL; |
| goto err_reset; |
| } |
| #endif |
| #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC |
| if (ehci->big_endian_desc) { |
| dev_err(&dev->dev, |
| "Error: CONFIG_USB_EHCI_BIG_ENDIAN_DESC not set\n"); |
| err = -EINVAL; |
| goto err_reset; |
| } |
| #endif |
| |
| if (pdata->power_on) { |
| err = pdata->power_on(dev); |
| if (err < 0) |
| goto err_reset; |
| } |
| |
| hcd->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res_mem); |
| if (IS_ERR(hcd->regs)) { |
| err = PTR_ERR(hcd->regs); |
| goto err_power; |
| } |
| hcd->rsrc_start = res_mem->start; |
| hcd->rsrc_len = resource_size(res_mem); |
| |
| hcd->tpl_support = of_usb_host_tpl_support(dev->dev.of_node); |
| |
| err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (err) |
| goto err_power; |
| |
| device_wakeup_enable(hcd->self.controller); |
| device_enable_async_suspend(hcd->self.controller); |
| platform_set_drvdata(dev, hcd); |
| |
| if (priv->quirk_poll) |
| quirk_poll_init(priv); |
| |
| return err; |
| |
| err_power: |
| if (pdata->power_off) |
| pdata->power_off(dev); |
| err_reset: |
| reset_control_assert(priv->rsts); |
| err_put_clks: |
| while (--clk >= 0) |
| clk_put(priv->clks[clk]); |
| |
| if (pdata == &ehci_platform_defaults) |
| dev->dev.platform_data = NULL; |
| |
| usb_put_hcd(hcd); |
| |
| return err; |
| } |
| |
| static void ehci_platform_remove(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); |
| struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); |
| int clk; |
| |
| if (priv->quirk_poll) |
| quirk_poll_end(priv); |
| |
| usb_remove_hcd(hcd); |
| |
| if (pdata->power_off) |
| pdata->power_off(dev); |
| |
| reset_control_assert(priv->rsts); |
| |
| for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) |
| clk_put(priv->clks[clk]); |
| |
| usb_put_hcd(hcd); |
| |
| if (pdata == &ehci_platform_defaults) |
| dev->dev.platform_data = NULL; |
| } |
| |
| static int __maybe_unused ehci_platform_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct usb_ehci_pdata *pdata = dev_get_platdata(dev); |
| struct platform_device *pdev = to_platform_device(dev); |
| struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); |
| bool do_wakeup = device_may_wakeup(dev); |
| int ret; |
| |
| if (priv->quirk_poll) |
| quirk_poll_end(priv); |
| |
| ret = ehci_suspend(hcd, do_wakeup); |
| if (ret) |
| return ret; |
| |
| if (pdata->power_suspend) |
| pdata->power_suspend(pdev); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused ehci_platform_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct usb_ehci_pdata *pdata = dev_get_platdata(dev); |
| struct platform_device *pdev = to_platform_device(dev); |
| struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); |
| struct device *companion_dev; |
| |
| if (pdata->power_on) { |
| int err = pdata->power_on(pdev); |
| if (err < 0) |
| return err; |
| } |
| |
| companion_dev = usb_of_get_companion_dev(hcd->self.controller); |
| if (companion_dev) { |
| device_pm_wait_for_dev(hcd->self.controller, companion_dev); |
| put_device(companion_dev); |
| } |
| |
| ehci_resume(hcd, priv->reset_on_resume); |
| |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| if (priv->quirk_poll) |
| quirk_poll_init(priv); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id vt8500_ehci_ids[] = { |
| { .compatible = "via,vt8500-ehci", }, |
| { .compatible = "wm,prizm-ehci", }, |
| { .compatible = "generic-ehci", }, |
| { .compatible = "cavium,octeon-6335-ehci", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id ehci_acpi_match[] = { |
| { "PNP0D20", 0 }, /* EHCI controller without debug */ |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, ehci_acpi_match); |
| #endif |
| |
| static const struct platform_device_id ehci_platform_table[] = { |
| { "ehci-platform", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(platform, ehci_platform_table); |
| |
| static SIMPLE_DEV_PM_OPS(ehci_platform_pm_ops, ehci_platform_suspend, |
| ehci_platform_resume); |
| |
| static struct platform_driver ehci_platform_driver = { |
| .id_table = ehci_platform_table, |
| .probe = ehci_platform_probe, |
| .remove_new = ehci_platform_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "ehci-platform", |
| .pm = pm_ptr(&ehci_platform_pm_ops), |
| .of_match_table = vt8500_ehci_ids, |
| .acpi_match_table = ACPI_PTR(ehci_acpi_match), |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| } |
| }; |
| |
| static int __init ehci_platform_init(void) |
| { |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); |
| return platform_driver_register(&ehci_platform_driver); |
| } |
| module_init(ehci_platform_init); |
| |
| static void __exit ehci_platform_cleanup(void) |
| { |
| platform_driver_unregister(&ehci_platform_driver); |
| } |
| module_exit(ehci_platform_cleanup); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_AUTHOR("Hauke Mehrtens"); |
| MODULE_AUTHOR("Alan Stern"); |
| MODULE_LICENSE("GPL"); |