| /* |
| * Copyright © 2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "intel_drv.h" |
| |
| static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable) |
| { |
| uint8_t reg_val = 0; |
| |
| /* Early return when display use other mechanism to enable backlight. */ |
| if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)) |
| return; |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, |
| ®_val) < 0) { |
| DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", |
| DP_EDP_DISPLAY_CONTROL_REGISTER); |
| return; |
| } |
| if (enable) |
| reg_val |= DP_EDP_BACKLIGHT_ENABLE; |
| else |
| reg_val &= ~(DP_EDP_BACKLIGHT_ENABLE); |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER, |
| reg_val) != 1) { |
| DRM_DEBUG_KMS("Failed to %s aux backlight\n", |
| enable ? "enable" : "disable"); |
| } |
| } |
| |
| /* |
| * Read the current backlight value from DPCD register(s) based |
| * on if 8-bit(MSB) or 16-bit(MSB and LSB) values are supported |
| */ |
| static uint32_t intel_dp_aux_get_backlight(struct intel_connector *connector) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); |
| uint8_t read_val[2] = { 0x0 }; |
| uint16_t level = 0; |
| |
| if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, |
| &read_val, sizeof(read_val)) < 0) { |
| DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", |
| DP_EDP_BACKLIGHT_BRIGHTNESS_MSB); |
| return 0; |
| } |
| level = read_val[0]; |
| if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) |
| level = (read_val[0] << 8 | read_val[1]); |
| |
| return level; |
| } |
| |
| /* |
| * Sends the current backlight level over the aux channel, checking if its using |
| * 8-bit or 16 bit value (MSB and LSB) |
| */ |
| static void |
| intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 level) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); |
| uint8_t vals[2] = { 0x0 }; |
| |
| vals[0] = level; |
| |
| /* Write the MSB and/or LSB */ |
| if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) { |
| vals[0] = (level & 0xFF00) >> 8; |
| vals[1] = (level & 0xFF); |
| } |
| if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, |
| vals, sizeof(vals)) < 0) { |
| DRM_DEBUG_KMS("Failed to write aux backlight level\n"); |
| return; |
| } |
| } |
| |
| static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); |
| uint8_t dpcd_buf = 0; |
| uint8_t edp_backlight_mode = 0; |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, |
| DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) { |
| DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", |
| DP_EDP_BACKLIGHT_MODE_SET_REGISTER); |
| return; |
| } |
| |
| edp_backlight_mode = dpcd_buf & DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; |
| |
| switch (edp_backlight_mode) { |
| case DP_EDP_BACKLIGHT_CONTROL_MODE_PWM: |
| case DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET: |
| case DP_EDP_BACKLIGHT_CONTROL_MODE_PRODUCT: |
| dpcd_buf &= ~DP_EDP_BACKLIGHT_CONTROL_MODE_MASK; |
| dpcd_buf |= DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD; |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, |
| DP_EDP_BACKLIGHT_MODE_SET_REGISTER, dpcd_buf) < 0) { |
| DRM_DEBUG_KMS("Failed to write aux backlight mode\n"); |
| } |
| break; |
| |
| /* Do nothing when it is already DPCD mode */ |
| case DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD: |
| default: |
| break; |
| } |
| |
| set_aux_backlight_enable(intel_dp, true); |
| intel_dp_aux_set_backlight(conn_state, connector->panel.backlight.level); |
| } |
| |
| static void intel_dp_aux_disable_backlight(const struct drm_connector_state *old_conn_state) |
| { |
| set_aux_backlight_enable(enc_to_intel_dp(old_conn_state->best_encoder), false); |
| } |
| |
| static int intel_dp_aux_setup_backlight(struct intel_connector *connector, |
| enum pipe pipe) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); |
| struct intel_panel *panel = &connector->panel; |
| |
| if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) |
| panel->backlight.max = 0xFFFF; |
| else |
| panel->backlight.max = 0xFF; |
| |
| panel->backlight.min = 0; |
| panel->backlight.level = intel_dp_aux_get_backlight(connector); |
| |
| panel->backlight.enabled = panel->backlight.level != 0; |
| |
| return 0; |
| } |
| |
| static bool |
| intel_dp_aux_display_control_capable(struct intel_connector *connector) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); |
| |
| /* Check the eDP Display control capabilities registers to determine if |
| * the panel can support backlight control over the aux channel |
| */ |
| if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP && |
| (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) && |
| !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) { |
| DRM_DEBUG_KMS("AUX Backlight Control Supported!\n"); |
| return true; |
| } |
| return false; |
| } |
| |
| int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) |
| { |
| struct intel_panel *panel = &intel_connector->panel; |
| |
| if (!i915.enable_dpcd_backlight) |
| return -ENODEV; |
| |
| if (!intel_dp_aux_display_control_capable(intel_connector)) |
| return -ENODEV; |
| |
| panel->backlight.setup = intel_dp_aux_setup_backlight; |
| panel->backlight.enable = intel_dp_aux_enable_backlight; |
| panel->backlight.disable = intel_dp_aux_disable_backlight; |
| panel->backlight.set = intel_dp_aux_set_backlight; |
| panel->backlight.get = intel_dp_aux_get_backlight; |
| |
| return 0; |
| } |