| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle |
| * Copyright (C) 2000 Silicon Graphics, Inc. |
| * Modified for further R[236]000 support by Paul M. Antoine, 1996. |
| * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000, 07 MIPS Technologies, Inc. |
| * Copyright (C) 2003, 2004 Maciej W. Rozycki |
| */ |
| #ifndef _ASM_MIPSREGS_H |
| #define _ASM_MIPSREGS_H |
| |
| #include <linux/linkage.h> |
| #include <asm/hazards.h> |
| #include <asm/war.h> |
| |
| /* |
| * The following macros are especially useful for __asm__ |
| * inline assembler. |
| */ |
| #ifndef __STR |
| #define __STR(x) #x |
| #endif |
| #ifndef STR |
| #define STR(x) __STR(x) |
| #endif |
| |
| /* |
| * Configure language |
| */ |
| #ifdef __ASSEMBLY__ |
| #define _ULCAST_ |
| #else |
| #define _ULCAST_ (unsigned long) |
| #endif |
| |
| /* |
| * Coprocessor 0 register names |
| */ |
| #define CP0_INDEX $0 |
| #define CP0_RANDOM $1 |
| #define CP0_ENTRYLO0 $2 |
| #define CP0_ENTRYLO1 $3 |
| #define CP0_CONF $3 |
| #define CP0_CONTEXT $4 |
| #define CP0_PAGEMASK $5 |
| #define CP0_WIRED $6 |
| #define CP0_INFO $7 |
| #define CP0_BADVADDR $8 |
| #define CP0_COUNT $9 |
| #define CP0_ENTRYHI $10 |
| #define CP0_COMPARE $11 |
| #define CP0_STATUS $12 |
| #define CP0_CAUSE $13 |
| #define CP0_EPC $14 |
| #define CP0_PRID $15 |
| #define CP0_CONFIG $16 |
| #define CP0_LLADDR $17 |
| #define CP0_WATCHLO $18 |
| #define CP0_WATCHHI $19 |
| #define CP0_XCONTEXT $20 |
| #define CP0_FRAMEMASK $21 |
| #define CP0_DIAGNOSTIC $22 |
| #define CP0_DEBUG $23 |
| #define CP0_DEPC $24 |
| #define CP0_PERFORMANCE $25 |
| #define CP0_ECC $26 |
| #define CP0_CACHEERR $27 |
| #define CP0_TAGLO $28 |
| #define CP0_TAGHI $29 |
| #define CP0_ERROREPC $30 |
| #define CP0_DESAVE $31 |
| |
| /* |
| * R4640/R4650 cp0 register names. These registers are listed |
| * here only for completeness; without MMU these CPUs are not useable |
| * by Linux. A future ELKS port might take make Linux run on them |
| * though ... |
| */ |
| #define CP0_IBASE $0 |
| #define CP0_IBOUND $1 |
| #define CP0_DBASE $2 |
| #define CP0_DBOUND $3 |
| #define CP0_CALG $17 |
| #define CP0_IWATCH $18 |
| #define CP0_DWATCH $19 |
| |
| /* |
| * Coprocessor 0 Set 1 register names |
| */ |
| #define CP0_S1_DERRADDR0 $26 |
| #define CP0_S1_DERRADDR1 $27 |
| #define CP0_S1_INTCONTROL $20 |
| |
| /* |
| * Coprocessor 0 Set 2 register names |
| */ |
| #define CP0_S2_SRSCTL $12 /* MIPSR2 */ |
| |
| /* |
| * Coprocessor 0 Set 3 register names |
| */ |
| #define CP0_S3_SRSMAP $12 /* MIPSR2 */ |
| |
| /* |
| * TX39 Series |
| */ |
| #define CP0_TX39_CACHE $7 |
| |
| /* |
| * Coprocessor 1 (FPU) register names |
| */ |
| #define CP1_REVISION $0 |
| #define CP1_STATUS $31 |
| |
| /* |
| * FPU Status Register Values |
| */ |
| /* |
| * Status Register Values |
| */ |
| |
| #define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */ |
| #define FPU_CSR_COND 0x00800000 /* $fcc0 */ |
| #define FPU_CSR_COND0 0x00800000 /* $fcc0 */ |
| #define FPU_CSR_COND1 0x02000000 /* $fcc1 */ |
| #define FPU_CSR_COND2 0x04000000 /* $fcc2 */ |
| #define FPU_CSR_COND3 0x08000000 /* $fcc3 */ |
| #define FPU_CSR_COND4 0x10000000 /* $fcc4 */ |
| #define FPU_CSR_COND5 0x20000000 /* $fcc5 */ |
| #define FPU_CSR_COND6 0x40000000 /* $fcc6 */ |
| #define FPU_CSR_COND7 0x80000000 /* $fcc7 */ |
| |
| /* |
| * X the exception cause indicator |
| * E the exception enable |
| * S the sticky/flag bit |
| */ |
| #define FPU_CSR_ALL_X 0x0003f000 |
| #define FPU_CSR_UNI_X 0x00020000 |
| #define FPU_CSR_INV_X 0x00010000 |
| #define FPU_CSR_DIV_X 0x00008000 |
| #define FPU_CSR_OVF_X 0x00004000 |
| #define FPU_CSR_UDF_X 0x00002000 |
| #define FPU_CSR_INE_X 0x00001000 |
| |
| #define FPU_CSR_ALL_E 0x00000f80 |
| #define FPU_CSR_INV_E 0x00000800 |
| #define FPU_CSR_DIV_E 0x00000400 |
| #define FPU_CSR_OVF_E 0x00000200 |
| #define FPU_CSR_UDF_E 0x00000100 |
| #define FPU_CSR_INE_E 0x00000080 |
| |
| #define FPU_CSR_ALL_S 0x0000007c |
| #define FPU_CSR_INV_S 0x00000040 |
| #define FPU_CSR_DIV_S 0x00000020 |
| #define FPU_CSR_OVF_S 0x00000010 |
| #define FPU_CSR_UDF_S 0x00000008 |
| #define FPU_CSR_INE_S 0x00000004 |
| |
| /* rounding mode */ |
| #define FPU_CSR_RN 0x0 /* nearest */ |
| #define FPU_CSR_RZ 0x1 /* towards zero */ |
| #define FPU_CSR_RU 0x2 /* towards +Infinity */ |
| #define FPU_CSR_RD 0x3 /* towards -Infinity */ |
| |
| |
| /* |
| * Values for PageMask register |
| */ |
| #ifdef CONFIG_CPU_VR41XX |
| |
| /* Why doesn't stupidity hurt ... */ |
| |
| #define PM_1K 0x00000000 |
| #define PM_4K 0x00001800 |
| #define PM_16K 0x00007800 |
| #define PM_64K 0x0001f800 |
| #define PM_256K 0x0007f800 |
| |
| #else |
| |
| #define PM_4K 0x00000000 |
| #define PM_16K 0x00006000 |
| #define PM_64K 0x0001e000 |
| #define PM_256K 0x0007e000 |
| #define PM_1M 0x001fe000 |
| #define PM_4M 0x007fe000 |
| #define PM_16M 0x01ffe000 |
| #define PM_64M 0x07ffe000 |
| #define PM_256M 0x1fffe000 |
| |
| #endif |
| |
| /* |
| * Default page size for a given kernel configuration |
| */ |
| #ifdef CONFIG_PAGE_SIZE_4KB |
| #define PM_DEFAULT_MASK PM_4K |
| #elif defined(CONFIG_PAGE_SIZE_16KB) |
| #define PM_DEFAULT_MASK PM_16K |
| #elif defined(CONFIG_PAGE_SIZE_64KB) |
| #define PM_DEFAULT_MASK PM_64K |
| #else |
| #error Bad page size configuration! |
| #endif |
| |
| |
| /* |
| * Values used for computation of new tlb entries |
| */ |
| #define PL_4K 12 |
| #define PL_16K 14 |
| #define PL_64K 16 |
| #define PL_256K 18 |
| #define PL_1M 20 |
| #define PL_4M 22 |
| #define PL_16M 24 |
| #define PL_64M 26 |
| #define PL_256M 28 |
| |
| /* |
| * R4x00 interrupt enable / cause bits |
| */ |
| #define IE_SW0 (_ULCAST_(1) << 8) |
| #define IE_SW1 (_ULCAST_(1) << 9) |
| #define IE_IRQ0 (_ULCAST_(1) << 10) |
| #define IE_IRQ1 (_ULCAST_(1) << 11) |
| #define IE_IRQ2 (_ULCAST_(1) << 12) |
| #define IE_IRQ3 (_ULCAST_(1) << 13) |
| #define IE_IRQ4 (_ULCAST_(1) << 14) |
| #define IE_IRQ5 (_ULCAST_(1) << 15) |
| |
| /* |
| * R4x00 interrupt cause bits |
| */ |
| #define C_SW0 (_ULCAST_(1) << 8) |
| #define C_SW1 (_ULCAST_(1) << 9) |
| #define C_IRQ0 (_ULCAST_(1) << 10) |
| #define C_IRQ1 (_ULCAST_(1) << 11) |
| #define C_IRQ2 (_ULCAST_(1) << 12) |
| #define C_IRQ3 (_ULCAST_(1) << 13) |
| #define C_IRQ4 (_ULCAST_(1) << 14) |
| #define C_IRQ5 (_ULCAST_(1) << 15) |
| |
| /* |
| * Bitfields in the R4xx0 cp0 status register |
| */ |
| #define ST0_IE 0x00000001 |
| #define ST0_EXL 0x00000002 |
| #define ST0_ERL 0x00000004 |
| #define ST0_KSU 0x00000018 |
| # define KSU_USER 0x00000010 |
| # define KSU_SUPERVISOR 0x00000008 |
| # define KSU_KERNEL 0x00000000 |
| #define ST0_UX 0x00000020 |
| #define ST0_SX 0x00000040 |
| #define ST0_KX 0x00000080 |
| #define ST0_DE 0x00010000 |
| #define ST0_CE 0x00020000 |
| |
| /* |
| * Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate |
| * cacheops in userspace. This bit exists only on RM7000 and RM9000 |
| * processors. |
| */ |
| #define ST0_CO 0x08000000 |
| |
| /* |
| * Bitfields in the R[23]000 cp0 status register. |
| */ |
| #define ST0_IEC 0x00000001 |
| #define ST0_KUC 0x00000002 |
| #define ST0_IEP 0x00000004 |
| #define ST0_KUP 0x00000008 |
| #define ST0_IEO 0x00000010 |
| #define ST0_KUO 0x00000020 |
| /* bits 6 & 7 are reserved on R[23]000 */ |
| #define ST0_ISC 0x00010000 |
| #define ST0_SWC 0x00020000 |
| #define ST0_CM 0x00080000 |
| |
| /* |
| * Bits specific to the R4640/R4650 |
| */ |
| #define ST0_UM (_ULCAST_(1) << 4) |
| #define ST0_IL (_ULCAST_(1) << 23) |
| #define ST0_DL (_ULCAST_(1) << 24) |
| |
| /* |
| * Enable the MIPS MDMX and DSP ASEs |
| */ |
| #define ST0_MX 0x01000000 |
| |
| /* |
| * Bitfields in the TX39 family CP0 Configuration Register 3 |
| */ |
| #define TX39_CONF_ICS_SHIFT 19 |
| #define TX39_CONF_ICS_MASK 0x00380000 |
| #define TX39_CONF_ICS_1KB 0x00000000 |
| #define TX39_CONF_ICS_2KB 0x00080000 |
| #define TX39_CONF_ICS_4KB 0x00100000 |
| #define TX39_CONF_ICS_8KB 0x00180000 |
| #define TX39_CONF_ICS_16KB 0x00200000 |
| |
| #define TX39_CONF_DCS_SHIFT 16 |
| #define TX39_CONF_DCS_MASK 0x00070000 |
| #define TX39_CONF_DCS_1KB 0x00000000 |
| #define TX39_CONF_DCS_2KB 0x00010000 |
| #define TX39_CONF_DCS_4KB 0x00020000 |
| #define TX39_CONF_DCS_8KB 0x00030000 |
| #define TX39_CONF_DCS_16KB 0x00040000 |
| |
| #define TX39_CONF_CWFON 0x00004000 |
| #define TX39_CONF_WBON 0x00002000 |
| #define TX39_CONF_RF_SHIFT 10 |
| #define TX39_CONF_RF_MASK 0x00000c00 |
| #define TX39_CONF_DOZE 0x00000200 |
| #define TX39_CONF_HALT 0x00000100 |
| #define TX39_CONF_LOCK 0x00000080 |
| #define TX39_CONF_ICE 0x00000020 |
| #define TX39_CONF_DCE 0x00000010 |
| #define TX39_CONF_IRSIZE_SHIFT 2 |
| #define TX39_CONF_IRSIZE_MASK 0x0000000c |
| #define TX39_CONF_DRSIZE_SHIFT 0 |
| #define TX39_CONF_DRSIZE_MASK 0x00000003 |
| |
| /* |
| * Status register bits available in all MIPS CPUs. |
| */ |
| #define ST0_IM 0x0000ff00 |
| #define STATUSB_IP0 8 |
| #define STATUSF_IP0 (_ULCAST_(1) << 8) |
| #define STATUSB_IP1 9 |
| #define STATUSF_IP1 (_ULCAST_(1) << 9) |
| #define STATUSB_IP2 10 |
| #define STATUSF_IP2 (_ULCAST_(1) << 10) |
| #define STATUSB_IP3 11 |
| #define STATUSF_IP3 (_ULCAST_(1) << 11) |
| #define STATUSB_IP4 12 |
| #define STATUSF_IP4 (_ULCAST_(1) << 12) |
| #define STATUSB_IP5 13 |
| #define STATUSF_IP5 (_ULCAST_(1) << 13) |
| #define STATUSB_IP6 14 |
| #define STATUSF_IP6 (_ULCAST_(1) << 14) |
| #define STATUSB_IP7 15 |
| #define STATUSF_IP7 (_ULCAST_(1) << 15) |
| #define STATUSB_IP8 0 |
| #define STATUSF_IP8 (_ULCAST_(1) << 0) |
| #define STATUSB_IP9 1 |
| #define STATUSF_IP9 (_ULCAST_(1) << 1) |
| #define STATUSB_IP10 2 |
| #define STATUSF_IP10 (_ULCAST_(1) << 2) |
| #define STATUSB_IP11 3 |
| #define STATUSF_IP11 (_ULCAST_(1) << 3) |
| #define STATUSB_IP12 4 |
| #define STATUSF_IP12 (_ULCAST_(1) << 4) |
| #define STATUSB_IP13 5 |
| #define STATUSF_IP13 (_ULCAST_(1) << 5) |
| #define STATUSB_IP14 6 |
| #define STATUSF_IP14 (_ULCAST_(1) << 6) |
| #define STATUSB_IP15 7 |
| #define STATUSF_IP15 (_ULCAST_(1) << 7) |
| #define ST0_CH 0x00040000 |
| #define ST0_SR 0x00100000 |
| #define ST0_TS 0x00200000 |
| #define ST0_BEV 0x00400000 |
| #define ST0_RE 0x02000000 |
| #define ST0_FR 0x04000000 |
| #define ST0_CU 0xf0000000 |
| #define ST0_CU0 0x10000000 |
| #define ST0_CU1 0x20000000 |
| #define ST0_CU2 0x40000000 |
| #define ST0_CU3 0x80000000 |
| #define ST0_XX 0x80000000 /* MIPS IV naming */ |
| |
| /* |
| * Bitfields and bit numbers in the coprocessor 0 cause register. |
| * |
| * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. |
| */ |
| #define CAUSEB_EXCCODE 2 |
| #define CAUSEF_EXCCODE (_ULCAST_(31) << 2) |
| #define CAUSEB_IP 8 |
| #define CAUSEF_IP (_ULCAST_(255) << 8) |
| #define CAUSEB_IP0 8 |
| #define CAUSEF_IP0 (_ULCAST_(1) << 8) |
| #define CAUSEB_IP1 9 |
| #define CAUSEF_IP1 (_ULCAST_(1) << 9) |
| #define CAUSEB_IP2 10 |
| #define CAUSEF_IP2 (_ULCAST_(1) << 10) |
| #define CAUSEB_IP3 11 |
| #define CAUSEF_IP3 (_ULCAST_(1) << 11) |
| #define CAUSEB_IP4 12 |
| #define CAUSEF_IP4 (_ULCAST_(1) << 12) |
| #define CAUSEB_IP5 13 |
| #define CAUSEF_IP5 (_ULCAST_(1) << 13) |
| #define CAUSEB_IP6 14 |
| #define CAUSEF_IP6 (_ULCAST_(1) << 14) |
| #define CAUSEB_IP7 15 |
| #define CAUSEF_IP7 (_ULCAST_(1) << 15) |
| #define CAUSEB_IV 23 |
| #define CAUSEF_IV (_ULCAST_(1) << 23) |
| #define CAUSEB_CE 28 |
| #define CAUSEF_CE (_ULCAST_(3) << 28) |
| #define CAUSEB_BD 31 |
| #define CAUSEF_BD (_ULCAST_(1) << 31) |
| |
| /* |
| * Bits in the coprocessor 0 config register. |
| */ |
| /* Generic bits. */ |
| #define CONF_CM_CACHABLE_NO_WA 0 |
| #define CONF_CM_CACHABLE_WA 1 |
| #define CONF_CM_UNCACHED 2 |
| #define CONF_CM_CACHABLE_NONCOHERENT 3 |
| #define CONF_CM_CACHABLE_CE 4 |
| #define CONF_CM_CACHABLE_COW 5 |
| #define CONF_CM_CACHABLE_CUW 6 |
| #define CONF_CM_CACHABLE_ACCELERATED 7 |
| #define CONF_CM_CMASK 7 |
| #define CONF_BE (_ULCAST_(1) << 15) |
| |
| /* Bits common to various processors. */ |
| #define CONF_CU (_ULCAST_(1) << 3) |
| #define CONF_DB (_ULCAST_(1) << 4) |
| #define CONF_IB (_ULCAST_(1) << 5) |
| #define CONF_DC (_ULCAST_(7) << 6) |
| #define CONF_IC (_ULCAST_(7) << 9) |
| #define CONF_EB (_ULCAST_(1) << 13) |
| #define CONF_EM (_ULCAST_(1) << 14) |
| #define CONF_SM (_ULCAST_(1) << 16) |
| #define CONF_SC (_ULCAST_(1) << 17) |
| #define CONF_EW (_ULCAST_(3) << 18) |
| #define CONF_EP (_ULCAST_(15)<< 24) |
| #define CONF_EC (_ULCAST_(7) << 28) |
| #define CONF_CM (_ULCAST_(1) << 31) |
| |
| /* Bits specific to the R4xx0. */ |
| #define R4K_CONF_SW (_ULCAST_(1) << 20) |
| #define R4K_CONF_SS (_ULCAST_(1) << 21) |
| #define R4K_CONF_SB (_ULCAST_(3) << 22) |
| |
| /* Bits specific to the R5000. */ |
| #define R5K_CONF_SE (_ULCAST_(1) << 12) |
| #define R5K_CONF_SS (_ULCAST_(3) << 20) |
| |
| /* Bits specific to the RM7000. */ |
| #define RM7K_CONF_SE (_ULCAST_(1) << 3) |
| #define RM7K_CONF_TE (_ULCAST_(1) << 12) |
| #define RM7K_CONF_CLK (_ULCAST_(1) << 16) |
| #define RM7K_CONF_TC (_ULCAST_(1) << 17) |
| #define RM7K_CONF_SI (_ULCAST_(3) << 20) |
| #define RM7K_CONF_SC (_ULCAST_(1) << 31) |
| |
| /* Bits specific to the R10000. */ |
| #define R10K_CONF_DN (_ULCAST_(3) << 3) |
| #define R10K_CONF_CT (_ULCAST_(1) << 5) |
| #define R10K_CONF_PE (_ULCAST_(1) << 6) |
| #define R10K_CONF_PM (_ULCAST_(3) << 7) |
| #define R10K_CONF_EC (_ULCAST_(15)<< 9) |
| #define R10K_CONF_SB (_ULCAST_(1) << 13) |
| #define R10K_CONF_SK (_ULCAST_(1) << 14) |
| #define R10K_CONF_SS (_ULCAST_(7) << 16) |
| #define R10K_CONF_SC (_ULCAST_(7) << 19) |
| #define R10K_CONF_DC (_ULCAST_(7) << 26) |
| #define R10K_CONF_IC (_ULCAST_(7) << 29) |
| |
| /* Bits specific to the VR41xx. */ |
| #define VR41_CONF_CS (_ULCAST_(1) << 12) |
| #define VR41_CONF_P4K (_ULCAST_(1) << 13) |
| #define VR41_CONF_BP (_ULCAST_(1) << 16) |
| #define VR41_CONF_M16 (_ULCAST_(1) << 20) |
| #define VR41_CONF_AD (_ULCAST_(1) << 23) |
| |
| /* Bits specific to the R30xx. */ |
| #define R30XX_CONF_FDM (_ULCAST_(1) << 19) |
| #define R30XX_CONF_REV (_ULCAST_(1) << 22) |
| #define R30XX_CONF_AC (_ULCAST_(1) << 23) |
| #define R30XX_CONF_RF (_ULCAST_(1) << 24) |
| #define R30XX_CONF_HALT (_ULCAST_(1) << 25) |
| #define R30XX_CONF_FPINT (_ULCAST_(7) << 26) |
| #define R30XX_CONF_DBR (_ULCAST_(1) << 29) |
| #define R30XX_CONF_SB (_ULCAST_(1) << 30) |
| #define R30XX_CONF_LOCK (_ULCAST_(1) << 31) |
| |
| /* Bits specific to the TX49. */ |
| #define TX49_CONF_DC (_ULCAST_(1) << 16) |
| #define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */ |
| #define TX49_CONF_HALT (_ULCAST_(1) << 18) |
| #define TX49_CONF_CWFON (_ULCAST_(1) << 27) |
| |
| /* Bits specific to the MIPS32/64 PRA. */ |
| #define MIPS_CONF_MT (_ULCAST_(7) << 7) |
| #define MIPS_CONF_AR (_ULCAST_(7) << 10) |
| #define MIPS_CONF_AT (_ULCAST_(3) << 13) |
| #define MIPS_CONF_M (_ULCAST_(1) << 31) |
| |
| /* |
| * Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above. |
| */ |
| #define MIPS_CONF1_FP (_ULCAST_(1) << 0) |
| #define MIPS_CONF1_EP (_ULCAST_(1) << 1) |
| #define MIPS_CONF1_CA (_ULCAST_(1) << 2) |
| #define MIPS_CONF1_WR (_ULCAST_(1) << 3) |
| #define MIPS_CONF1_PC (_ULCAST_(1) << 4) |
| #define MIPS_CONF1_MD (_ULCAST_(1) << 5) |
| #define MIPS_CONF1_C2 (_ULCAST_(1) << 6) |
| #define MIPS_CONF1_DA (_ULCAST_(7) << 7) |
| #define MIPS_CONF1_DL (_ULCAST_(7) << 10) |
| #define MIPS_CONF1_DS (_ULCAST_(7) << 13) |
| #define MIPS_CONF1_IA (_ULCAST_(7) << 16) |
| #define MIPS_CONF1_IL (_ULCAST_(7) << 19) |
| #define MIPS_CONF1_IS (_ULCAST_(7) << 22) |
| #define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) |
| |
| #define MIPS_CONF2_SA (_ULCAST_(15)<< 0) |
| #define MIPS_CONF2_SL (_ULCAST_(15)<< 4) |
| #define MIPS_CONF2_SS (_ULCAST_(15)<< 8) |
| #define MIPS_CONF2_SU (_ULCAST_(15)<< 12) |
| #define MIPS_CONF2_TA (_ULCAST_(15)<< 16) |
| #define MIPS_CONF2_TL (_ULCAST_(15)<< 20) |
| #define MIPS_CONF2_TS (_ULCAST_(15)<< 24) |
| #define MIPS_CONF2_TU (_ULCAST_(7) << 28) |
| |
| #define MIPS_CONF3_TL (_ULCAST_(1) << 0) |
| #define MIPS_CONF3_SM (_ULCAST_(1) << 1) |
| #define MIPS_CONF3_MT (_ULCAST_(1) << 2) |
| #define MIPS_CONF3_SP (_ULCAST_(1) << 4) |
| #define MIPS_CONF3_VINT (_ULCAST_(1) << 5) |
| #define MIPS_CONF3_VEIC (_ULCAST_(1) << 6) |
| #define MIPS_CONF3_LPA (_ULCAST_(1) << 7) |
| #define MIPS_CONF3_DSP (_ULCAST_(1) << 10) |
| #define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) |
| |
| #define MIPS_CONF7_WII (_ULCAST_(1) << 31) |
| |
| #define MIPS_CONF7_RPS (_ULCAST_(1) << 2) |
| |
| |
| /* |
| * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register. |
| */ |
| #define MIPS_FPIR_S (_ULCAST_(1) << 16) |
| #define MIPS_FPIR_D (_ULCAST_(1) << 17) |
| #define MIPS_FPIR_PS (_ULCAST_(1) << 18) |
| #define MIPS_FPIR_3D (_ULCAST_(1) << 19) |
| #define MIPS_FPIR_W (_ULCAST_(1) << 20) |
| #define MIPS_FPIR_L (_ULCAST_(1) << 21) |
| #define MIPS_FPIR_F64 (_ULCAST_(1) << 22) |
| |
| #ifndef __ASSEMBLY__ |
| |
| /* |
| * Functions to access the R10000 performance counters. These are basically |
| * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit |
| * performance counter number encoded into bits 1 ... 5 of the instruction. |
| * Only performance counters 0 to 1 actually exist, so for a non-R10000 aware |
| * disassembler these will look like an access to sel 0 or 1. |
| */ |
| #define read_r10k_perf_cntr(counter) \ |
| ({ \ |
| unsigned int __res; \ |
| __asm__ __volatile__( \ |
| "mfpc\t%0, %1" \ |
| : "=r" (__res) \ |
| : "i" (counter)); \ |
| \ |
| __res; \ |
| }) |
| |
| #define write_r10k_perf_cntr(counter,val) \ |
| do { \ |
| __asm__ __volatile__( \ |
| "mtpc\t%0, %1" \ |
| : \ |
| : "r" (val), "i" (counter)); \ |
| } while (0) |
| |
| #define read_r10k_perf_event(counter) \ |
| ({ \ |
| unsigned int __res; \ |
| __asm__ __volatile__( \ |
| "mfps\t%0, %1" \ |
| : "=r" (__res) \ |
| : "i" (counter)); \ |
| \ |
| __res; \ |
| }) |
| |
| #define write_r10k_perf_cntl(counter,val) \ |
| do { \ |
| __asm__ __volatile__( \ |
| "mtps\t%0, %1" \ |
| : \ |
| : "r" (val), "i" (counter)); \ |
| } while (0) |
| |
| |
| /* |
| * Macros to access the system control coprocessor |
| */ |
| |
| #define __read_32bit_c0_register(source, sel) \ |
| ({ int __res; \ |
| if (sel == 0) \ |
| __asm__ __volatile__( \ |
| "mfc0\t%0, " #source "\n\t" \ |
| : "=r" (__res)); \ |
| else \ |
| __asm__ __volatile__( \ |
| ".set\tmips32\n\t" \ |
| "mfc0\t%0, " #source ", " #sel "\n\t" \ |
| ".set\tmips0\n\t" \ |
| : "=r" (__res)); \ |
| __res; \ |
| }) |
| |
| #define __read_64bit_c0_register(source, sel) \ |
| ({ unsigned long long __res; \ |
| if (sizeof(unsigned long) == 4) \ |
| __res = __read_64bit_c0_split(source, sel); \ |
| else if (sel == 0) \ |
| __asm__ __volatile__( \ |
| ".set\tmips3\n\t" \ |
| "dmfc0\t%0, " #source "\n\t" \ |
| ".set\tmips0" \ |
| : "=r" (__res)); \ |
| else \ |
| __asm__ __volatile__( \ |
| ".set\tmips64\n\t" \ |
| "dmfc0\t%0, " #source ", " #sel "\n\t" \ |
| ".set\tmips0" \ |
| : "=r" (__res)); \ |
| __res; \ |
| }) |
| |
| #define __write_32bit_c0_register(register, sel, value) \ |
| do { \ |
| if (sel == 0) \ |
| __asm__ __volatile__( \ |
| "mtc0\t%z0, " #register "\n\t" \ |
| : : "Jr" ((unsigned int)(value))); \ |
| else \ |
| __asm__ __volatile__( \ |
| ".set\tmips32\n\t" \ |
| "mtc0\t%z0, " #register ", " #sel "\n\t" \ |
| ".set\tmips0" \ |
| : : "Jr" ((unsigned int)(value))); \ |
| } while (0) |
| |
| #define __write_64bit_c0_register(register, sel, value) \ |
| do { \ |
| if (sizeof(unsigned long) == 4) \ |
| __write_64bit_c0_split(register, sel, value); \ |
| else if (sel == 0) \ |
| __asm__ __volatile__( \ |
| ".set\tmips3\n\t" \ |
| "dmtc0\t%z0, " #register "\n\t" \ |
| ".set\tmips0" \ |
| : : "Jr" (value)); \ |
| else \ |
| __asm__ __volatile__( \ |
| ".set\tmips64\n\t" \ |
| "dmtc0\t%z0, " #register ", " #sel "\n\t" \ |
| ".set\tmips0" \ |
| : : "Jr" (value)); \ |
| } while (0) |
| |
| #define __read_ulong_c0_register(reg, sel) \ |
| ((sizeof(unsigned long) == 4) ? \ |
| (unsigned long) __read_32bit_c0_register(reg, sel) : \ |
| (unsigned long) __read_64bit_c0_register(reg, sel)) |
| |
| #define __write_ulong_c0_register(reg, sel, val) \ |
| do { \ |
| if (sizeof(unsigned long) == 4) \ |
| __write_32bit_c0_register(reg, sel, val); \ |
| else \ |
| __write_64bit_c0_register(reg, sel, val); \ |
| } while (0) |
| |
| /* |
| * On RM7000/RM9000 these are uses to access cop0 set 1 registers |
| */ |
| #define __read_32bit_c0_ctrl_register(source) \ |
| ({ int __res; \ |
| __asm__ __volatile__( \ |
| "cfc0\t%0, " #source "\n\t" \ |
| : "=r" (__res)); \ |
| __res; \ |
| }) |
| |
| #define __write_32bit_c0_ctrl_register(register, value) \ |
| do { \ |
| __asm__ __volatile__( \ |
| "ctc0\t%z0, " #register "\n\t" \ |
| : : "Jr" ((unsigned int)(value))); \ |
| } while (0) |
| |
| /* |
| * These versions are only needed for systems with more than 38 bits of |
| * physical address space running the 32-bit kernel. That's none atm :-) |
| */ |
| #define __read_64bit_c0_split(source, sel) \ |
| ({ \ |
| unsigned long long __val; \ |
| unsigned long __flags; \ |
| \ |
| local_irq_save(__flags); \ |
| if (sel == 0) \ |
| __asm__ __volatile__( \ |
| ".set\tmips64\n\t" \ |
| "dmfc0\t%M0, " #source "\n\t" \ |
| "dsll\t%L0, %M0, 32\n\t" \ |
| "dsrl\t%M0, %M0, 32\n\t" \ |
| "dsrl\t%L0, %L0, 32\n\t" \ |
| ".set\tmips0" \ |
| : "=r" (__val)); \ |
| else \ |
| __asm__ __volatile__( \ |
| ".set\tmips64\n\t" \ |
| "dmfc0\t%M0, " #source ", " #sel "\n\t" \ |
| "dsll\t%L0, %M0, 32\n\t" \ |
| "dsrl\t%M0, %M0, 32\n\t" \ |
| "dsrl\t%L0, %L0, 32\n\t" \ |
| ".set\tmips0" \ |
| : "=r" (__val)); \ |
| local_irq_restore(__flags); \ |
| \ |
| __val; \ |
| }) |
| |
| #define __write_64bit_c0_split(source, sel, val) \ |
| do { \ |
| unsigned long __flags; \ |
| \ |
| local_irq_save(__flags); \ |
| if (sel == 0) \ |
| __asm__ __volatile__( \ |
| ".set\tmips64\n\t" \ |
| "dsll\t%L0, %L0, 32\n\t" \ |
| "dsrl\t%L0, %L0, 32\n\t" \ |
| "dsll\t%M0, %M0, 32\n\t" \ |
| "or\t%L0, %L0, %M0\n\t" \ |
| "dmtc0\t%L0, " #source "\n\t" \ |
| ".set\tmips0" \ |
| : : "r" (val)); \ |
| else \ |
| __asm__ __volatile__( \ |
| ".set\tmips64\n\t" \ |
| "dsll\t%L0, %L0, 32\n\t" \ |
| "dsrl\t%L0, %L0, 32\n\t" \ |
| "dsll\t%M0, %M0, 32\n\t" \ |
| "or\t%L0, %L0, %M0\n\t" \ |
| "dmtc0\t%L0, " #source ", " #sel "\n\t" \ |
| ".set\tmips0" \ |
| : : "r" (val)); \ |
| local_irq_restore(__flags); \ |
| } while (0) |
| |
| #define read_c0_index() __read_32bit_c0_register($0, 0) |
| #define write_c0_index(val) __write_32bit_c0_register($0, 0, val) |
| |
| #define read_c0_entrylo0() __read_ulong_c0_register($2, 0) |
| #define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) |
| |
| #define read_c0_entrylo1() __read_ulong_c0_register($3, 0) |
| #define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val) |
| |
| #define read_c0_conf() __read_32bit_c0_register($3, 0) |
| #define write_c0_conf(val) __write_32bit_c0_register($3, 0, val) |
| |
| #define read_c0_context() __read_ulong_c0_register($4, 0) |
| #define write_c0_context(val) __write_ulong_c0_register($4, 0, val) |
| |
| #define read_c0_userlocal() __read_ulong_c0_register($4, 2) |
| #define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val) |
| |
| #define read_c0_pagemask() __read_32bit_c0_register($5, 0) |
| #define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) |
| |
| #define read_c0_wired() __read_32bit_c0_register($6, 0) |
| #define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) |
| |
| #define read_c0_info() __read_32bit_c0_register($7, 0) |
| |
| #define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */ |
| #define write_c0_cache(val) __write_32bit_c0_register($7, 0, val) |
| |
| #define read_c0_badvaddr() __read_ulong_c0_register($8, 0) |
| #define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val) |
| |
| #define read_c0_count() __read_32bit_c0_register($9, 0) |
| #define write_c0_count(val) __write_32bit_c0_register($9, 0, val) |
| |
| #define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */ |
| #define write_c0_count2(val) __write_32bit_c0_register($9, 6, val) |
| |
| #define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */ |
| #define write_c0_count3(val) __write_32bit_c0_register($9, 7, val) |
| |
| #define read_c0_entryhi() __read_ulong_c0_register($10, 0) |
| #define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val) |
| |
| #define read_c0_compare() __read_32bit_c0_register($11, 0) |
| #define write_c0_compare(val) __write_32bit_c0_register($11, 0, val) |
| |
| #define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */ |
| #define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val) |
| |
| #define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */ |
| #define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val) |
| |
| #define read_c0_status() __read_32bit_c0_register($12, 0) |
| #ifdef CONFIG_MIPS_MT_SMTC |
| #define write_c0_status(val) \ |
| do { \ |
| __write_32bit_c0_register($12, 0, val); \ |
| __ehb(); \ |
| } while (0) |
| #else |
| /* |
| * Legacy non-SMTC code, which may be hazardous |
| * but which might not support EHB |
| */ |
| #define write_c0_status(val) __write_32bit_c0_register($12, 0, val) |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| |
| #define read_c0_cause() __read_32bit_c0_register($13, 0) |
| #define write_c0_cause(val) __write_32bit_c0_register($13, 0, val) |
| |
| #define read_c0_epc() __read_ulong_c0_register($14, 0) |
| #define write_c0_epc(val) __write_ulong_c0_register($14, 0, val) |
| |
| #define read_c0_prid() __read_32bit_c0_register($15, 0) |
| |
| #define read_c0_config() __read_32bit_c0_register($16, 0) |
| #define read_c0_config1() __read_32bit_c0_register($16, 1) |
| #define read_c0_config2() __read_32bit_c0_register($16, 2) |
| #define read_c0_config3() __read_32bit_c0_register($16, 3) |
| #define read_c0_config4() __read_32bit_c0_register($16, 4) |
| #define read_c0_config5() __read_32bit_c0_register($16, 5) |
| #define read_c0_config6() __read_32bit_c0_register($16, 6) |
| #define read_c0_config7() __read_32bit_c0_register($16, 7) |
| #define write_c0_config(val) __write_32bit_c0_register($16, 0, val) |
| #define write_c0_config1(val) __write_32bit_c0_register($16, 1, val) |
| #define write_c0_config2(val) __write_32bit_c0_register($16, 2, val) |
| #define write_c0_config3(val) __write_32bit_c0_register($16, 3, val) |
| #define write_c0_config4(val) __write_32bit_c0_register($16, 4, val) |
| #define write_c0_config5(val) __write_32bit_c0_register($16, 5, val) |
| #define write_c0_config6(val) __write_32bit_c0_register($16, 6, val) |
| #define write_c0_config7(val) __write_32bit_c0_register($16, 7, val) |
| |
| /* |
| * The WatchLo register. There may be upto 8 of them. |
| */ |
| #define read_c0_watchlo0() __read_ulong_c0_register($18, 0) |
| #define read_c0_watchlo1() __read_ulong_c0_register($18, 1) |
| #define read_c0_watchlo2() __read_ulong_c0_register($18, 2) |
| #define read_c0_watchlo3() __read_ulong_c0_register($18, 3) |
| #define read_c0_watchlo4() __read_ulong_c0_register($18, 4) |
| #define read_c0_watchlo5() __read_ulong_c0_register($18, 5) |
| #define read_c0_watchlo6() __read_ulong_c0_register($18, 6) |
| #define read_c0_watchlo7() __read_ulong_c0_register($18, 7) |
| #define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val) |
| #define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val) |
| #define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val) |
| #define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val) |
| #define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val) |
| #define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val) |
| #define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val) |
| #define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val) |
| |
| /* |
| * The WatchHi register. There may be upto 8 of them. |
| */ |
| #define read_c0_watchhi0() __read_32bit_c0_register($19, 0) |
| #define read_c0_watchhi1() __read_32bit_c0_register($19, 1) |
| #define read_c0_watchhi2() __read_32bit_c0_register($19, 2) |
| #define read_c0_watchhi3() __read_32bit_c0_register($19, 3) |
| #define read_c0_watchhi4() __read_32bit_c0_register($19, 4) |
| #define read_c0_watchhi5() __read_32bit_c0_register($19, 5) |
| #define read_c0_watchhi6() __read_32bit_c0_register($19, 6) |
| #define read_c0_watchhi7() __read_32bit_c0_register($19, 7) |
| |
| #define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val) |
| #define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val) |
| #define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val) |
| #define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val) |
| #define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val) |
| #define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val) |
| #define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val) |
| #define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val) |
| |
| #define read_c0_xcontext() __read_ulong_c0_register($20, 0) |
| #define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val) |
| |
| #define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20) |
| #define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val) |
| |
| #define read_c0_framemask() __read_32bit_c0_register($21, 0) |
| #define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val) |
| |
| /* RM9000 PerfControl performance counter control register */ |
| #define read_c0_perfcontrol() __read_32bit_c0_register($22, 0) |
| #define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val) |
| |
| #define read_c0_diag() __read_32bit_c0_register($22, 0) |
| #define write_c0_diag(val) __write_32bit_c0_register($22, 0, val) |
| |
| #define read_c0_diag1() __read_32bit_c0_register($22, 1) |
| #define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val) |
| |
| #define read_c0_diag2() __read_32bit_c0_register($22, 2) |
| #define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val) |
| |
| #define read_c0_diag3() __read_32bit_c0_register($22, 3) |
| #define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val) |
| |
| #define read_c0_diag4() __read_32bit_c0_register($22, 4) |
| #define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val) |
| |
| #define read_c0_diag5() __read_32bit_c0_register($22, 5) |
| #define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val) |
| |
| #define read_c0_debug() __read_32bit_c0_register($23, 0) |
| #define write_c0_debug(val) __write_32bit_c0_register($23, 0, val) |
| |
| #define read_c0_depc() __read_ulong_c0_register($24, 0) |
| #define write_c0_depc(val) __write_ulong_c0_register($24, 0, val) |
| |
| /* |
| * MIPS32 / MIPS64 performance counters |
| */ |
| #define read_c0_perfctrl0() __read_32bit_c0_register($25, 0) |
| #define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val) |
| #define read_c0_perfcntr0() __read_32bit_c0_register($25, 1) |
| #define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val) |
| #define read_c0_perfctrl1() __read_32bit_c0_register($25, 2) |
| #define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val) |
| #define read_c0_perfcntr1() __read_32bit_c0_register($25, 3) |
| #define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val) |
| #define read_c0_perfctrl2() __read_32bit_c0_register($25, 4) |
| #define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val) |
| #define read_c0_perfcntr2() __read_32bit_c0_register($25, 5) |
| #define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val) |
| #define read_c0_perfctrl3() __read_32bit_c0_register($25, 6) |
| #define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val) |
| #define read_c0_perfcntr3() __read_32bit_c0_register($25, 7) |
| #define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val) |
| |
| /* RM9000 PerfCount performance counter register */ |
| #define read_c0_perfcount() __read_64bit_c0_register($25, 0) |
| #define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val) |
| |
| #define read_c0_ecc() __read_32bit_c0_register($26, 0) |
| #define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val) |
| |
| #define read_c0_derraddr0() __read_ulong_c0_register($26, 1) |
| #define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val) |
| |
| #define read_c0_cacheerr() __read_32bit_c0_register($27, 0) |
| |
| #define read_c0_derraddr1() __read_ulong_c0_register($27, 1) |
| #define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val) |
| |
| #define read_c0_taglo() __read_32bit_c0_register($28, 0) |
| #define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val) |
| |
| #define read_c0_dtaglo() __read_32bit_c0_register($28, 2) |
| #define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val) |
| |
| #define read_c0_taghi() __read_32bit_c0_register($29, 0) |
| #define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val) |
| |
| #define read_c0_errorepc() __read_ulong_c0_register($30, 0) |
| #define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val) |
| |
| /* MIPSR2 */ |
| #define read_c0_hwrena() __read_32bit_c0_register($7, 0) |
| #define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val) |
| |
| #define read_c0_intctl() __read_32bit_c0_register($12, 1) |
| #define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val) |
| |
| #define read_c0_srsctl() __read_32bit_c0_register($12, 2) |
| #define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val) |
| |
| #define read_c0_srsmap() __read_32bit_c0_register($12, 3) |
| #define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val) |
| |
| #define read_c0_ebase() __read_32bit_c0_register($15, 1) |
| #define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val) |
| |
| /* |
| * Macros to access the floating point coprocessor control registers |
| */ |
| #define read_32bit_cp1_register(source) \ |
| ({ int __res; \ |
| __asm__ __volatile__( \ |
| ".set\tpush\n\t" \ |
| ".set\treorder\n\t" \ |
| "cfc1\t%0,"STR(source)"\n\t" \ |
| ".set\tpop" \ |
| : "=r" (__res)); \ |
| __res;}) |
| |
| #define rddsp(mask) \ |
| ({ \ |
| unsigned int __res; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # rddsp $1, %x1 \n" \ |
| " .word 0x7c000cb8 | (%x1 << 16) \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__res) \ |
| : "i" (mask)); \ |
| __res; \ |
| }) |
| |
| #define wrdsp(val, mask) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # wrdsp $1, %x1 \n" \ |
| " .word 0x7c2004f8 | (%x1 << 11) \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (val), "i" (mask)); \ |
| } while (0) |
| |
| #if 0 /* Need DSP ASE capable assembler ... */ |
| #define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;}) |
| #define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;}) |
| #define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;}) |
| #define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;}) |
| |
| #define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;}) |
| #define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;}) |
| #define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;}) |
| #define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;}) |
| |
| #define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x)) |
| #define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x)) |
| #define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x)) |
| #define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x)) |
| |
| #define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x)) |
| #define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x)) |
| #define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x)) |
| #define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x)) |
| |
| #else |
| |
| #define mfhi0() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mfhi %0, $ac0 \n" \ |
| " .word 0x00000810 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mfhi1() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mfhi %0, $ac1 \n" \ |
| " .word 0x00200810 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mfhi2() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mfhi %0, $ac2 \n" \ |
| " .word 0x00400810 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mfhi3() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mfhi %0, $ac3 \n" \ |
| " .word 0x00600810 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mflo0() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mflo %0, $ac0 \n" \ |
| " .word 0x00000812 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mflo1() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mflo %0, $ac1 \n" \ |
| " .word 0x00200812 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mflo2() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mflo %0, $ac2 \n" \ |
| " .word 0x00400812 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mflo3() \ |
| ({ \ |
| unsigned long __treg; \ |
| \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " # mflo %0, $ac3 \n" \ |
| " .word 0x00600812 \n" \ |
| " move %0, $1 \n" \ |
| " .set pop \n" \ |
| : "=r" (__treg)); \ |
| __treg; \ |
| }) |
| |
| #define mthi0(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mthi $1, $ac0 \n" \ |
| " .word 0x00200011 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #define mthi1(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mthi $1, $ac1 \n" \ |
| " .word 0x00200811 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #define mthi2(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mthi $1, $ac2 \n" \ |
| " .word 0x00201011 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #define mthi3(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mthi $1, $ac3 \n" \ |
| " .word 0x00201811 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #define mtlo0(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mtlo $1, $ac0 \n" \ |
| " .word 0x00200013 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #define mtlo1(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mtlo $1, $ac1 \n" \ |
| " .word 0x00200813 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #define mtlo2(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mtlo $1, $ac2 \n" \ |
| " .word 0x00201013 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #define mtlo3(x) \ |
| do { \ |
| __asm__ __volatile__( \ |
| " .set push \n" \ |
| " .set noat \n" \ |
| " move $1, %0 \n" \ |
| " # mtlo $1, $ac3 \n" \ |
| " .word 0x00201813 \n" \ |
| " .set pop \n" \ |
| : \ |
| : "r" (x)); \ |
| } while (0) |
| |
| #endif |
| |
| /* |
| * TLB operations. |
| * |
| * It is responsibility of the caller to take care of any TLB hazards. |
| */ |
| static inline void tlb_probe(void) |
| { |
| __asm__ __volatile__( |
| ".set noreorder\n\t" |
| "tlbp\n\t" |
| ".set reorder"); |
| } |
| |
| static inline void tlb_read(void) |
| { |
| #if MIPS34K_MISSED_ITLB_WAR |
| int res = 0; |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " .set noat \n" |
| " .set mips32r2 \n" |
| " .word 0x41610001 # dvpe $1 \n" |
| " move %0, $1 \n" |
| " ehb \n" |
| " .set pop \n" |
| : "=r" (res)); |
| |
| instruction_hazard(); |
| #endif |
| |
| __asm__ __volatile__( |
| ".set noreorder\n\t" |
| "tlbr\n\t" |
| ".set reorder"); |
| |
| #if MIPS34K_MISSED_ITLB_WAR |
| if ((res & _ULCAST_(1))) |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set noreorder \n" |
| " .set noat \n" |
| " .set mips32r2 \n" |
| " .word 0x41600021 # evpe \n" |
| " ehb \n" |
| " .set pop \n"); |
| #endif |
| } |
| |
| static inline void tlb_write_indexed(void) |
| { |
| __asm__ __volatile__( |
| ".set noreorder\n\t" |
| "tlbwi\n\t" |
| ".set reorder"); |
| } |
| |
| static inline void tlb_write_random(void) |
| { |
| __asm__ __volatile__( |
| ".set noreorder\n\t" |
| "tlbwr\n\t" |
| ".set reorder"); |
| } |
| |
| /* |
| * Manipulate bits in a c0 register. |
| */ |
| #ifndef CONFIG_MIPS_MT_SMTC |
| /* |
| * SMTC Linux requires shutting-down microthread scheduling |
| * during CP0 register read-modify-write sequences. |
| */ |
| #define __BUILD_SET_C0(name) \ |
| static inline unsigned int \ |
| set_c0_##name(unsigned int set) \ |
| { \ |
| unsigned int res; \ |
| \ |
| res = read_c0_##name(); \ |
| res |= set; \ |
| write_c0_##name(res); \ |
| \ |
| return res; \ |
| } \ |
| \ |
| static inline unsigned int \ |
| clear_c0_##name(unsigned int clear) \ |
| { \ |
| unsigned int res; \ |
| \ |
| res = read_c0_##name(); \ |
| res &= ~clear; \ |
| write_c0_##name(res); \ |
| \ |
| return res; \ |
| } \ |
| \ |
| static inline unsigned int \ |
| change_c0_##name(unsigned int change, unsigned int new) \ |
| { \ |
| unsigned int res; \ |
| \ |
| res = read_c0_##name(); \ |
| res &= ~change; \ |
| res |= (new & change); \ |
| write_c0_##name(res); \ |
| \ |
| return res; \ |
| } |
| |
| #else /* SMTC versions that manage MT scheduling */ |
| |
| #include <linux/irqflags.h> |
| |
| /* |
| * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with |
| * header file recursion. |
| */ |
| static inline unsigned int __dmt(void) |
| { |
| int res; |
| |
| __asm__ __volatile__( |
| " .set push \n" |
| " .set mips32r2 \n" |
| " .set noat \n" |
| " .word 0x41610BC1 # dmt $1 \n" |
| " ehb \n" |
| " move %0, $1 \n" |
| " .set pop \n" |
| : "=r" (res)); |
| |
| instruction_hazard(); |
| |
| return res; |
| } |
| |
| #define __VPECONTROL_TE_SHIFT 15 |
| #define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT) |
| |
| #define __EMT_ENABLE __VPECONTROL_TE |
| |
| static inline void __emt(unsigned int previous) |
| { |
| if ((previous & __EMT_ENABLE)) |
| __asm__ __volatile__( |
| " .set mips32r2 \n" |
| " .word 0x41600be1 # emt \n" |
| " ehb \n" |
| " .set mips0 \n"); |
| } |
| |
| static inline void __ehb(void) |
| { |
| __asm__ __volatile__( |
| " .set mips32r2 \n" |
| " ehb \n" " .set mips0 \n"); |
| } |
| |
| /* |
| * Note that local_irq_save/restore affect TC-specific IXMT state, |
| * not Status.IE as in non-SMTC kernel. |
| */ |
| |
| #define __BUILD_SET_C0(name) \ |
| static inline unsigned int \ |
| set_c0_##name(unsigned int set) \ |
| { \ |
| unsigned int res; \ |
| unsigned int omt; \ |
| unsigned int flags; \ |
| \ |
| local_irq_save(flags); \ |
| omt = __dmt(); \ |
| res = read_c0_##name(); \ |
| res |= set; \ |
| write_c0_##name(res); \ |
| __emt(omt); \ |
| local_irq_restore(flags); \ |
| \ |
| return res; \ |
| } \ |
| \ |
| static inline unsigned int \ |
| clear_c0_##name(unsigned int clear) \ |
| { \ |
| unsigned int res; \ |
| unsigned int omt; \ |
| unsigned int flags; \ |
| \ |
| local_irq_save(flags); \ |
| omt = __dmt(); \ |
| res = read_c0_##name(); \ |
| res &= ~clear; \ |
| write_c0_##name(res); \ |
| __emt(omt); \ |
| local_irq_restore(flags); \ |
| \ |
| return res; \ |
| } \ |
| \ |
| static inline unsigned int \ |
| change_c0_##name(unsigned int change, unsigned int new) \ |
| { \ |
| unsigned int res; \ |
| unsigned int omt; \ |
| unsigned int flags; \ |
| \ |
| local_irq_save(flags); \ |
| \ |
| omt = __dmt(); \ |
| res = read_c0_##name(); \ |
| res &= ~change; \ |
| res |= (new & change); \ |
| write_c0_##name(res); \ |
| __emt(omt); \ |
| local_irq_restore(flags); \ |
| \ |
| return res; \ |
| } |
| #endif |
| |
| __BUILD_SET_C0(status) |
| __BUILD_SET_C0(cause) |
| __BUILD_SET_C0(config) |
| __BUILD_SET_C0(intcontrol) |
| __BUILD_SET_C0(intctl) |
| __BUILD_SET_C0(srsmap) |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| #endif /* _ASM_MIPSREGS_H */ |
