| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Zynq clock controller |
| * |
| * Copyright (C) 2012 - 2013 Xilinx |
| * |
| * Sören Brinkmann <soren.brinkmann@xilinx.com> |
| */ |
| |
| #include <linux/clk/zynq.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/io.h> |
| |
| static void __iomem *zynq_clkc_base; |
| |
| #define SLCR_ARMPLL_CTRL (zynq_clkc_base + 0x00) |
| #define SLCR_DDRPLL_CTRL (zynq_clkc_base + 0x04) |
| #define SLCR_IOPLL_CTRL (zynq_clkc_base + 0x08) |
| #define SLCR_PLL_STATUS (zynq_clkc_base + 0x0c) |
| #define SLCR_ARM_CLK_CTRL (zynq_clkc_base + 0x20) |
| #define SLCR_DDR_CLK_CTRL (zynq_clkc_base + 0x24) |
| #define SLCR_DCI_CLK_CTRL (zynq_clkc_base + 0x28) |
| #define SLCR_APER_CLK_CTRL (zynq_clkc_base + 0x2c) |
| #define SLCR_GEM0_CLK_CTRL (zynq_clkc_base + 0x40) |
| #define SLCR_GEM1_CLK_CTRL (zynq_clkc_base + 0x44) |
| #define SLCR_SMC_CLK_CTRL (zynq_clkc_base + 0x48) |
| #define SLCR_LQSPI_CLK_CTRL (zynq_clkc_base + 0x4c) |
| #define SLCR_SDIO_CLK_CTRL (zynq_clkc_base + 0x50) |
| #define SLCR_UART_CLK_CTRL (zynq_clkc_base + 0x54) |
| #define SLCR_SPI_CLK_CTRL (zynq_clkc_base + 0x58) |
| #define SLCR_CAN_CLK_CTRL (zynq_clkc_base + 0x5c) |
| #define SLCR_CAN_MIOCLK_CTRL (zynq_clkc_base + 0x60) |
| #define SLCR_DBG_CLK_CTRL (zynq_clkc_base + 0x64) |
| #define SLCR_PCAP_CLK_CTRL (zynq_clkc_base + 0x68) |
| #define SLCR_FPGA0_CLK_CTRL (zynq_clkc_base + 0x70) |
| #define SLCR_621_TRUE (zynq_clkc_base + 0xc4) |
| #define SLCR_SWDT_CLK_SEL (zynq_clkc_base + 0x204) |
| |
| #define NUM_MIO_PINS 54 |
| |
| #define DBG_CLK_CTRL_CLKACT_TRC BIT(0) |
| #define DBG_CLK_CTRL_CPU_1XCLKACT BIT(1) |
| |
| enum zynq_clk { |
| armpll, ddrpll, iopll, |
| cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x, |
| ddr2x, ddr3x, dci, |
| lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1, |
| sdio0, sdio1, uart0, uart1, spi0, spi1, dma, |
| usb0_aper, usb1_aper, gem0_aper, gem1_aper, |
| sdio0_aper, sdio1_aper, spi0_aper, spi1_aper, can0_aper, can1_aper, |
| i2c0_aper, i2c1_aper, uart0_aper, uart1_aper, gpio_aper, lqspi_aper, |
| smc_aper, swdt, dbg_trc, dbg_apb, clk_max}; |
| |
| static struct clk *ps_clk; |
| static struct clk *clks[clk_max]; |
| static struct clk_onecell_data clk_data; |
| |
| static DEFINE_SPINLOCK(armpll_lock); |
| static DEFINE_SPINLOCK(ddrpll_lock); |
| static DEFINE_SPINLOCK(iopll_lock); |
| static DEFINE_SPINLOCK(armclk_lock); |
| static DEFINE_SPINLOCK(swdtclk_lock); |
| static DEFINE_SPINLOCK(ddrclk_lock); |
| static DEFINE_SPINLOCK(dciclk_lock); |
| static DEFINE_SPINLOCK(gem0clk_lock); |
| static DEFINE_SPINLOCK(gem1clk_lock); |
| static DEFINE_SPINLOCK(canclk_lock); |
| static DEFINE_SPINLOCK(canmioclk_lock); |
| static DEFINE_SPINLOCK(dbgclk_lock); |
| static DEFINE_SPINLOCK(aperclk_lock); |
| |
| static const char *const armpll_parents[] __initconst = {"armpll_int", |
| "ps_clk"}; |
| static const char *const ddrpll_parents[] __initconst = {"ddrpll_int", |
| "ps_clk"}; |
| static const char *const iopll_parents[] __initconst = {"iopll_int", |
| "ps_clk"}; |
| static const char *gem0_mux_parents[] __initdata = {"gem0_div1", "dummy_name"}; |
| static const char *gem1_mux_parents[] __initdata = {"gem1_div1", "dummy_name"}; |
| static const char *const can0_mio_mux2_parents[] __initconst = {"can0_gate", |
| "can0_mio_mux"}; |
| static const char *const can1_mio_mux2_parents[] __initconst = {"can1_gate", |
| "can1_mio_mux"}; |
| static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div", |
| "dummy_name"}; |
| |
| static const char *const dbgtrc_emio_input_names[] __initconst = { |
| "trace_emio_clk"}; |
| static const char *const gem0_emio_input_names[] __initconst = { |
| "gem0_emio_clk"}; |
| static const char *const gem1_emio_input_names[] __initconst = { |
| "gem1_emio_clk"}; |
| static const char *const swdt_ext_clk_input_names[] __initconst = { |
| "swdt_ext_clk"}; |
| |
| static void __init zynq_clk_register_fclk(enum zynq_clk fclk, |
| const char *clk_name, void __iomem *fclk_ctrl_reg, |
| const char **parents, int enable) |
| { |
| u32 enable_reg; |
| char *mux_name; |
| char *div0_name; |
| char *div1_name; |
| spinlock_t *fclk_lock; |
| spinlock_t *fclk_gate_lock; |
| void __iomem *fclk_gate_reg = fclk_ctrl_reg + 8; |
| |
| fclk_lock = kmalloc(sizeof(*fclk_lock), GFP_KERNEL); |
| if (!fclk_lock) |
| goto err; |
| fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL); |
| if (!fclk_gate_lock) |
| goto err_fclk_gate_lock; |
| spin_lock_init(fclk_lock); |
| spin_lock_init(fclk_gate_lock); |
| |
| mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name); |
| if (!mux_name) |
| goto err_mux_name; |
| div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name); |
| if (!div0_name) |
| goto err_div0_name; |
| div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name); |
| if (!div1_name) |
| goto err_div1_name; |
| |
| clk_register_mux(NULL, mux_name, parents, 4, |
| CLK_SET_RATE_NO_REPARENT, fclk_ctrl_reg, 4, 2, 0, |
| fclk_lock); |
| |
| clk_register_divider(NULL, div0_name, mux_name, |
| 0, fclk_ctrl_reg, 8, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, fclk_lock); |
| |
| clk_register_divider(NULL, div1_name, div0_name, |
| CLK_SET_RATE_PARENT, fclk_ctrl_reg, 20, 6, |
| CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, |
| fclk_lock); |
| |
| clks[fclk] = clk_register_gate(NULL, clk_name, |
| div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg, |
| 0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock); |
| enable_reg = readl(fclk_gate_reg) & 1; |
| if (enable && !enable_reg) { |
| if (clk_prepare_enable(clks[fclk])) |
| pr_warn("%s: FCLK%u enable failed\n", __func__, |
| fclk - fclk0); |
| } |
| kfree(mux_name); |
| kfree(div0_name); |
| kfree(div1_name); |
| |
| return; |
| |
| err_div1_name: |
| kfree(div0_name); |
| err_div0_name: |
| kfree(mux_name); |
| err_mux_name: |
| kfree(fclk_gate_lock); |
| err_fclk_gate_lock: |
| kfree(fclk_lock); |
| err: |
| clks[fclk] = ERR_PTR(-ENOMEM); |
| } |
| |
| static void __init zynq_clk_register_periph_clk(enum zynq_clk clk0, |
| enum zynq_clk clk1, const char *clk_name0, |
| const char *clk_name1, void __iomem *clk_ctrl, |
| const char **parents, unsigned int two_gates) |
| { |
| char *mux_name; |
| char *div_name; |
| spinlock_t *lock; |
| |
| lock = kmalloc(sizeof(*lock), GFP_KERNEL); |
| if (!lock) |
| goto err; |
| spin_lock_init(lock); |
| |
| mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name0); |
| div_name = kasprintf(GFP_KERNEL, "%s_div", clk_name0); |
| |
| clk_register_mux(NULL, mux_name, parents, 4, |
| CLK_SET_RATE_NO_REPARENT, clk_ctrl, 4, 2, 0, lock); |
| |
| clk_register_divider(NULL, div_name, mux_name, 0, clk_ctrl, 8, 6, |
| CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, lock); |
| |
| clks[clk0] = clk_register_gate(NULL, clk_name0, div_name, |
| CLK_SET_RATE_PARENT, clk_ctrl, 0, 0, lock); |
| if (two_gates) |
| clks[clk1] = clk_register_gate(NULL, clk_name1, div_name, |
| CLK_SET_RATE_PARENT, clk_ctrl, 1, 0, lock); |
| |
| kfree(mux_name); |
| kfree(div_name); |
| |
| return; |
| |
| err: |
| clks[clk0] = ERR_PTR(-ENOMEM); |
| if (two_gates) |
| clks[clk1] = ERR_PTR(-ENOMEM); |
| } |
| |
| static void __init zynq_clk_setup(struct device_node *np) |
| { |
| int i; |
| u32 tmp; |
| int ret; |
| char *clk_name; |
| unsigned int fclk_enable = 0; |
| const char *clk_output_name[clk_max]; |
| const char *cpu_parents[4]; |
| const char *periph_parents[4]; |
| const char *swdt_ext_clk_mux_parents[2]; |
| const char *can_mio_mux_parents[NUM_MIO_PINS]; |
| const char *dummy_nm = "dummy_name"; |
| |
| pr_info("Zynq clock init\n"); |
| |
| /* get clock output names from DT */ |
| for (i = 0; i < clk_max; i++) { |
| if (of_property_read_string_index(np, "clock-output-names", |
| i, &clk_output_name[i])) { |
| pr_err("%s: clock output name not in DT\n", __func__); |
| BUG(); |
| } |
| } |
| cpu_parents[0] = clk_output_name[armpll]; |
| cpu_parents[1] = clk_output_name[armpll]; |
| cpu_parents[2] = clk_output_name[ddrpll]; |
| cpu_parents[3] = clk_output_name[iopll]; |
| periph_parents[0] = clk_output_name[iopll]; |
| periph_parents[1] = clk_output_name[iopll]; |
| periph_parents[2] = clk_output_name[armpll]; |
| periph_parents[3] = clk_output_name[ddrpll]; |
| |
| of_property_read_u32(np, "fclk-enable", &fclk_enable); |
| |
| /* ps_clk */ |
| ret = of_property_read_u32(np, "ps-clk-frequency", &tmp); |
| if (ret) { |
| pr_warn("ps_clk frequency not specified, using 33 MHz.\n"); |
| tmp = 33333333; |
| } |
| ps_clk = clk_register_fixed_rate(NULL, "ps_clk", NULL, 0, tmp); |
| |
| /* PLLs */ |
| clk_register_zynq_pll("armpll_int", "ps_clk", SLCR_ARMPLL_CTRL, |
| SLCR_PLL_STATUS, 0, &armpll_lock); |
| clks[armpll] = clk_register_mux(NULL, clk_output_name[armpll], |
| armpll_parents, 2, CLK_SET_RATE_NO_REPARENT, |
| SLCR_ARMPLL_CTRL, 4, 1, 0, &armpll_lock); |
| |
| clk_register_zynq_pll("ddrpll_int", "ps_clk", SLCR_DDRPLL_CTRL, |
| SLCR_PLL_STATUS, 1, &ddrpll_lock); |
| clks[ddrpll] = clk_register_mux(NULL, clk_output_name[ddrpll], |
| ddrpll_parents, 2, CLK_SET_RATE_NO_REPARENT, |
| SLCR_DDRPLL_CTRL, 4, 1, 0, &ddrpll_lock); |
| |
| clk_register_zynq_pll("iopll_int", "ps_clk", SLCR_IOPLL_CTRL, |
| SLCR_PLL_STATUS, 2, &iopll_lock); |
| clks[iopll] = clk_register_mux(NULL, clk_output_name[iopll], |
| iopll_parents, 2, CLK_SET_RATE_NO_REPARENT, |
| SLCR_IOPLL_CTRL, 4, 1, 0, &iopll_lock); |
| |
| /* CPU clocks */ |
| tmp = readl(SLCR_621_TRUE) & 1; |
| clk_register_mux(NULL, "cpu_mux", cpu_parents, 4, |
| CLK_SET_RATE_NO_REPARENT, SLCR_ARM_CLK_CTRL, 4, 2, 0, |
| &armclk_lock); |
| clk_register_divider(NULL, "cpu_div", "cpu_mux", 0, |
| SLCR_ARM_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &armclk_lock); |
| |
| clks[cpu_6or4x] = clk_register_gate(NULL, clk_output_name[cpu_6or4x], |
| "cpu_div", CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, |
| SLCR_ARM_CLK_CTRL, 24, 0, &armclk_lock); |
| |
| clk_register_fixed_factor(NULL, "cpu_3or2x_div", "cpu_div", 0, |
| 1, 2); |
| clks[cpu_3or2x] = clk_register_gate(NULL, clk_output_name[cpu_3or2x], |
| "cpu_3or2x_div", CLK_IGNORE_UNUSED, |
| SLCR_ARM_CLK_CTRL, 25, 0, &armclk_lock); |
| |
| clk_register_fixed_factor(NULL, "cpu_2x_div", "cpu_div", 0, 1, |
| 2 + tmp); |
| clks[cpu_2x] = clk_register_gate(NULL, clk_output_name[cpu_2x], |
| "cpu_2x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, |
| 26, 0, &armclk_lock); |
| clk_prepare_enable(clks[cpu_2x]); |
| |
| clk_register_fixed_factor(NULL, "cpu_1x_div", "cpu_div", 0, 1, |
| 4 + 2 * tmp); |
| clks[cpu_1x] = clk_register_gate(NULL, clk_output_name[cpu_1x], |
| "cpu_1x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, 27, |
| 0, &armclk_lock); |
| |
| /* Timers */ |
| swdt_ext_clk_mux_parents[0] = clk_output_name[cpu_1x]; |
| for (i = 0; i < ARRAY_SIZE(swdt_ext_clk_input_names); i++) { |
| int idx = of_property_match_string(np, "clock-names", |
| swdt_ext_clk_input_names[i]); |
| if (idx >= 0) |
| swdt_ext_clk_mux_parents[i + 1] = |
| of_clk_get_parent_name(np, idx); |
| else |
| swdt_ext_clk_mux_parents[i + 1] = dummy_nm; |
| } |
| clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt], |
| swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT | |
| CLK_SET_RATE_NO_REPARENT, SLCR_SWDT_CLK_SEL, 0, 1, 0, |
| &swdtclk_lock); |
| |
| /* DDR clocks */ |
| clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0, |
| SLCR_DDR_CLK_CTRL, 26, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); |
| clks[ddr2x] = clk_register_gate(NULL, clk_output_name[ddr2x], |
| "ddr2x_div", 0, SLCR_DDR_CLK_CTRL, 1, 0, &ddrclk_lock); |
| clk_prepare_enable(clks[ddr2x]); |
| clk_register_divider(NULL, "ddr3x_div", "ddrpll", 0, |
| SLCR_DDR_CLK_CTRL, 20, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); |
| clks[ddr3x] = clk_register_gate(NULL, clk_output_name[ddr3x], |
| "ddr3x_div", 0, SLCR_DDR_CLK_CTRL, 0, 0, &ddrclk_lock); |
| clk_prepare_enable(clks[ddr3x]); |
| |
| clk_register_divider(NULL, "dci_div0", "ddrpll", 0, |
| SLCR_DCI_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &dciclk_lock); |
| clk_register_divider(NULL, "dci_div1", "dci_div0", |
| CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 20, 6, |
| CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, |
| &dciclk_lock); |
| clks[dci] = clk_register_gate(NULL, clk_output_name[dci], "dci_div1", |
| CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 0, 0, |
| &dciclk_lock); |
| clk_prepare_enable(clks[dci]); |
| |
| /* Peripheral clocks */ |
| for (i = fclk0; i <= fclk3; i++) { |
| int enable = !!(fclk_enable & BIT(i - fclk0)); |
| |
| zynq_clk_register_fclk(i, clk_output_name[i], |
| SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0), |
| periph_parents, enable); |
| } |
| |
| zynq_clk_register_periph_clk(lqspi, clk_max, clk_output_name[lqspi], NULL, |
| SLCR_LQSPI_CLK_CTRL, periph_parents, 0); |
| |
| zynq_clk_register_periph_clk(smc, clk_max, clk_output_name[smc], NULL, |
| SLCR_SMC_CLK_CTRL, periph_parents, 0); |
| |
| zynq_clk_register_periph_clk(pcap, clk_max, clk_output_name[pcap], NULL, |
| SLCR_PCAP_CLK_CTRL, periph_parents, 0); |
| |
| zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0], |
| clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL, |
| periph_parents, 1); |
| |
| zynq_clk_register_periph_clk(uart0, uart1, clk_output_name[uart0], |
| clk_output_name[uart1], SLCR_UART_CLK_CTRL, |
| periph_parents, 1); |
| |
| zynq_clk_register_periph_clk(spi0, spi1, clk_output_name[spi0], |
| clk_output_name[spi1], SLCR_SPI_CLK_CTRL, |
| periph_parents, 1); |
| |
| for (i = 0; i < ARRAY_SIZE(gem0_emio_input_names); i++) { |
| int idx = of_property_match_string(np, "clock-names", |
| gem0_emio_input_names[i]); |
| if (idx >= 0) |
| gem0_mux_parents[i + 1] = of_clk_get_parent_name(np, |
| idx); |
| } |
| clk_register_mux(NULL, "gem0_mux", periph_parents, 4, |
| CLK_SET_RATE_NO_REPARENT, SLCR_GEM0_CLK_CTRL, 4, 2, 0, |
| &gem0clk_lock); |
| clk_register_divider(NULL, "gem0_div0", "gem0_mux", 0, |
| SLCR_GEM0_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &gem0clk_lock); |
| clk_register_divider(NULL, "gem0_div1", "gem0_div0", |
| CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6, |
| CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, |
| &gem0clk_lock); |
| clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, |
| CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, |
| SLCR_GEM0_CLK_CTRL, 6, 1, 0, |
| &gem0clk_lock); |
| clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0], |
| "gem0_emio_mux", CLK_SET_RATE_PARENT, |
| SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock); |
| |
| for (i = 0; i < ARRAY_SIZE(gem1_emio_input_names); i++) { |
| int idx = of_property_match_string(np, "clock-names", |
| gem1_emio_input_names[i]); |
| if (idx >= 0) |
| gem1_mux_parents[i + 1] = of_clk_get_parent_name(np, |
| idx); |
| } |
| clk_register_mux(NULL, "gem1_mux", periph_parents, 4, |
| CLK_SET_RATE_NO_REPARENT, SLCR_GEM1_CLK_CTRL, 4, 2, 0, |
| &gem1clk_lock); |
| clk_register_divider(NULL, "gem1_div0", "gem1_mux", 0, |
| SLCR_GEM1_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &gem1clk_lock); |
| clk_register_divider(NULL, "gem1_div1", "gem1_div0", |
| CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6, |
| CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, |
| &gem1clk_lock); |
| clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, |
| CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, |
| SLCR_GEM1_CLK_CTRL, 6, 1, 0, |
| &gem1clk_lock); |
| clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1], |
| "gem1_emio_mux", CLK_SET_RATE_PARENT, |
| SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock); |
| |
| tmp = strlen("mio_clk_00x"); |
| clk_name = kmalloc(tmp, GFP_KERNEL); |
| for (i = 0; i < NUM_MIO_PINS; i++) { |
| int idx; |
| |
| snprintf(clk_name, tmp, "mio_clk_%2.2d", i); |
| idx = of_property_match_string(np, "clock-names", clk_name); |
| if (idx >= 0) |
| can_mio_mux_parents[i] = of_clk_get_parent_name(np, |
| idx); |
| else |
| can_mio_mux_parents[i] = dummy_nm; |
| } |
| kfree(clk_name); |
| clk_register_mux(NULL, "can_mux", periph_parents, 4, |
| CLK_SET_RATE_NO_REPARENT, SLCR_CAN_CLK_CTRL, 4, 2, 0, |
| &canclk_lock); |
| clk_register_divider(NULL, "can_div0", "can_mux", 0, |
| SLCR_CAN_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &canclk_lock); |
| clk_register_divider(NULL, "can_div1", "can_div0", |
| CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 20, 6, |
| CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, |
| &canclk_lock); |
| clk_register_gate(NULL, "can0_gate", "can_div1", |
| CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 0, 0, |
| &canclk_lock); |
| clk_register_gate(NULL, "can1_gate", "can_div1", |
| CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 1, 0, |
| &canclk_lock); |
| clk_register_mux(NULL, "can0_mio_mux", |
| can_mio_mux_parents, 54, CLK_SET_RATE_PARENT | |
| CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 0, 6, 0, |
| &canmioclk_lock); |
| clk_register_mux(NULL, "can1_mio_mux", |
| can_mio_mux_parents, 54, CLK_SET_RATE_PARENT | |
| CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 16, 6, |
| 0, &canmioclk_lock); |
| clks[can0] = clk_register_mux(NULL, clk_output_name[can0], |
| can0_mio_mux2_parents, 2, CLK_SET_RATE_PARENT | |
| CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 6, 1, 0, |
| &canmioclk_lock); |
| clks[can1] = clk_register_mux(NULL, clk_output_name[can1], |
| can1_mio_mux2_parents, 2, CLK_SET_RATE_PARENT | |
| CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 22, 1, |
| 0, &canmioclk_lock); |
| |
| for (i = 0; i < ARRAY_SIZE(dbgtrc_emio_input_names); i++) { |
| int idx = of_property_match_string(np, "clock-names", |
| dbgtrc_emio_input_names[i]); |
| if (idx >= 0) |
| dbg_emio_mux_parents[i + 1] = of_clk_get_parent_name(np, |
| idx); |
| } |
| clk_register_mux(NULL, "dbg_mux", periph_parents, 4, |
| CLK_SET_RATE_NO_REPARENT, SLCR_DBG_CLK_CTRL, 4, 2, 0, |
| &dbgclk_lock); |
| clk_register_divider(NULL, "dbg_div", "dbg_mux", 0, |
| SLCR_DBG_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ALLOW_ZERO, &dbgclk_lock); |
| clk_register_mux(NULL, "dbg_emio_mux", dbg_emio_mux_parents, 2, |
| CLK_SET_RATE_NO_REPARENT, SLCR_DBG_CLK_CTRL, 6, 1, 0, |
| &dbgclk_lock); |
| clks[dbg_trc] = clk_register_gate(NULL, clk_output_name[dbg_trc], |
| "dbg_emio_mux", CLK_SET_RATE_PARENT, SLCR_DBG_CLK_CTRL, |
| 0, 0, &dbgclk_lock); |
| clks[dbg_apb] = clk_register_gate(NULL, clk_output_name[dbg_apb], |
| clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0, |
| &dbgclk_lock); |
| |
| /* leave debug clocks in the state the bootloader set them up to */ |
| tmp = readl(SLCR_DBG_CLK_CTRL); |
| if (tmp & DBG_CLK_CTRL_CLKACT_TRC) |
| if (clk_prepare_enable(clks[dbg_trc])) |
| pr_warn("%s: trace clk enable failed\n", __func__); |
| if (tmp & DBG_CLK_CTRL_CPU_1XCLKACT) |
| if (clk_prepare_enable(clks[dbg_apb])) |
| pr_warn("%s: debug APB clk enable failed\n", __func__); |
| |
| /* One gated clock for all APER clocks. */ |
| clks[dma] = clk_register_gate(NULL, clk_output_name[dma], |
| clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0, |
| &aperclk_lock); |
| clks[usb0_aper] = clk_register_gate(NULL, clk_output_name[usb0_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 2, 0, |
| &aperclk_lock); |
| clks[usb1_aper] = clk_register_gate(NULL, clk_output_name[usb1_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 3, 0, |
| &aperclk_lock); |
| clks[gem0_aper] = clk_register_gate(NULL, clk_output_name[gem0_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 6, 0, |
| &aperclk_lock); |
| clks[gem1_aper] = clk_register_gate(NULL, clk_output_name[gem1_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 7, 0, |
| &aperclk_lock); |
| clks[sdio0_aper] = clk_register_gate(NULL, clk_output_name[sdio0_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 10, 0, |
| &aperclk_lock); |
| clks[sdio1_aper] = clk_register_gate(NULL, clk_output_name[sdio1_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 11, 0, |
| &aperclk_lock); |
| clks[spi0_aper] = clk_register_gate(NULL, clk_output_name[spi0_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 14, 0, |
| &aperclk_lock); |
| clks[spi1_aper] = clk_register_gate(NULL, clk_output_name[spi1_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 15, 0, |
| &aperclk_lock); |
| clks[can0_aper] = clk_register_gate(NULL, clk_output_name[can0_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 16, 0, |
| &aperclk_lock); |
| clks[can1_aper] = clk_register_gate(NULL, clk_output_name[can1_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 17, 0, |
| &aperclk_lock); |
| clks[i2c0_aper] = clk_register_gate(NULL, clk_output_name[i2c0_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 18, 0, |
| &aperclk_lock); |
| clks[i2c1_aper] = clk_register_gate(NULL, clk_output_name[i2c1_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 19, 0, |
| &aperclk_lock); |
| clks[uart0_aper] = clk_register_gate(NULL, clk_output_name[uart0_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 20, 0, |
| &aperclk_lock); |
| clks[uart1_aper] = clk_register_gate(NULL, clk_output_name[uart1_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 21, 0, |
| &aperclk_lock); |
| clks[gpio_aper] = clk_register_gate(NULL, clk_output_name[gpio_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 22, 0, |
| &aperclk_lock); |
| clks[lqspi_aper] = clk_register_gate(NULL, clk_output_name[lqspi_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 23, 0, |
| &aperclk_lock); |
| clks[smc_aper] = clk_register_gate(NULL, clk_output_name[smc_aper], |
| clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 24, 0, |
| &aperclk_lock); |
| |
| for (i = 0; i < ARRAY_SIZE(clks); i++) { |
| if (IS_ERR(clks[i])) { |
| pr_err("Zynq clk %d: register failed with %ld\n", |
| i, PTR_ERR(clks[i])); |
| BUG(); |
| } |
| } |
| |
| clk_data.clks = clks; |
| clk_data.clk_num = ARRAY_SIZE(clks); |
| of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); |
| } |
| |
| CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup); |
| |
| void __init zynq_clock_init(void) |
| { |
| struct device_node *np; |
| struct device_node *slcr; |
| struct resource res; |
| |
| np = of_find_compatible_node(NULL, NULL, "xlnx,ps7-clkc"); |
| if (!np) { |
| pr_err("%s: clkc node not found\n", __func__); |
| goto np_err; |
| } |
| |
| if (of_address_to_resource(np, 0, &res)) { |
| pr_err("%pOFn: failed to get resource\n", np); |
| goto np_err; |
| } |
| |
| slcr = of_get_parent(np); |
| |
| if (slcr->data) { |
| zynq_clkc_base = (__force void __iomem *)slcr->data + res.start; |
| } else { |
| pr_err("%pOFn: Unable to get I/O memory\n", np); |
| of_node_put(slcr); |
| goto np_err; |
| } |
| |
| pr_info("%s: clkc starts at %p\n", __func__, zynq_clkc_base); |
| |
| of_node_put(slcr); |
| of_node_put(np); |
| |
| return; |
| |
| np_err: |
| of_node_put(np); |
| BUG(); |
| } |