| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * DAMON-based LRU-lists Sorting |
| * |
| * Author: SeongJae Park <sj@kernel.org> |
| */ |
| |
| #define pr_fmt(fmt) "damon-lru-sort: " fmt |
| |
| #include <linux/damon.h> |
| #include <linux/kstrtox.h> |
| #include <linux/module.h> |
| |
| #include "modules-common.h" |
| |
| #ifdef MODULE_PARAM_PREFIX |
| #undef MODULE_PARAM_PREFIX |
| #endif |
| #define MODULE_PARAM_PREFIX "damon_lru_sort." |
| |
| /* |
| * Enable or disable DAMON_LRU_SORT. |
| * |
| * You can enable DAMON_LRU_SORT by setting the value of this parameter as |
| * ``Y``. Setting it as ``N`` disables DAMON_LRU_SORT. Note that |
| * DAMON_LRU_SORT could do no real monitoring and LRU-lists sorting due to the |
| * watermarks-based activation condition. Refer to below descriptions for the |
| * watermarks parameter for this. |
| */ |
| static bool enabled __read_mostly; |
| |
| /* |
| * Make DAMON_LRU_SORT reads the input parameters again, except ``enabled``. |
| * |
| * Input parameters that updated while DAMON_LRU_SORT is running are not |
| * applied by default. Once this parameter is set as ``Y``, DAMON_LRU_SORT |
| * reads values of parametrs except ``enabled`` again. Once the re-reading is |
| * done, this parameter is set as ``N``. If invalid parameters are found while |
| * the re-reading, DAMON_LRU_SORT will be disabled. |
| */ |
| static bool commit_inputs __read_mostly; |
| module_param(commit_inputs, bool, 0600); |
| |
| /* |
| * Access frequency threshold for hot memory regions identification in permil. |
| * |
| * If a memory region is accessed in frequency of this or higher, |
| * DAMON_LRU_SORT identifies the region as hot, and mark it as accessed on the |
| * LRU list, so that it could not be reclaimed under memory pressure. 50% by |
| * default. |
| */ |
| static unsigned long hot_thres_access_freq = 500; |
| module_param(hot_thres_access_freq, ulong, 0600); |
| |
| /* |
| * Time threshold for cold memory regions identification in microseconds. |
| * |
| * If a memory region is not accessed for this or longer time, DAMON_LRU_SORT |
| * identifies the region as cold, and mark it as unaccessed on the LRU list, so |
| * that it could be reclaimed first under memory pressure. 120 seconds by |
| * default. |
| */ |
| static unsigned long cold_min_age __read_mostly = 120000000; |
| module_param(cold_min_age, ulong, 0600); |
| |
| static struct damos_quota damon_lru_sort_quota = { |
| /* Use up to 10 ms per 1 sec, by default */ |
| .ms = 10, |
| .sz = 0, |
| .reset_interval = 1000, |
| /* Within the quota, mark hotter regions accessed first. */ |
| .weight_sz = 0, |
| .weight_nr_accesses = 1, |
| .weight_age = 0, |
| }; |
| DEFINE_DAMON_MODULES_DAMOS_TIME_QUOTA(damon_lru_sort_quota); |
| |
| static struct damos_watermarks damon_lru_sort_wmarks = { |
| .metric = DAMOS_WMARK_FREE_MEM_RATE, |
| .interval = 5000000, /* 5 seconds */ |
| .high = 200, /* 20 percent */ |
| .mid = 150, /* 15 percent */ |
| .low = 50, /* 5 percent */ |
| }; |
| DEFINE_DAMON_MODULES_WMARKS_PARAMS(damon_lru_sort_wmarks); |
| |
| static struct damon_attrs damon_lru_sort_mon_attrs = { |
| .sample_interval = 5000, /* 5 ms */ |
| .aggr_interval = 100000, /* 100 ms */ |
| .ops_update_interval = 0, |
| .min_nr_regions = 10, |
| .max_nr_regions = 1000, |
| }; |
| DEFINE_DAMON_MODULES_MON_ATTRS_PARAMS(damon_lru_sort_mon_attrs); |
| |
| /* |
| * Start of the target memory region in physical address. |
| * |
| * The start physical address of memory region that DAMON_LRU_SORT will do work |
| * against. By default, biggest System RAM is used as the region. |
| */ |
| static unsigned long monitor_region_start __read_mostly; |
| module_param(monitor_region_start, ulong, 0600); |
| |
| /* |
| * End of the target memory region in physical address. |
| * |
| * The end physical address of memory region that DAMON_LRU_SORT will do work |
| * against. By default, biggest System RAM is used as the region. |
| */ |
| static unsigned long monitor_region_end __read_mostly; |
| module_param(monitor_region_end, ulong, 0600); |
| |
| /* |
| * PID of the DAMON thread |
| * |
| * If DAMON_LRU_SORT is enabled, this becomes the PID of the worker thread. |
| * Else, -1. |
| */ |
| static int kdamond_pid __read_mostly = -1; |
| module_param(kdamond_pid, int, 0400); |
| |
| static struct damos_stat damon_lru_sort_hot_stat; |
| DEFINE_DAMON_MODULES_DAMOS_STATS_PARAMS(damon_lru_sort_hot_stat, |
| lru_sort_tried_hot_regions, lru_sorted_hot_regions, |
| hot_quota_exceeds); |
| |
| static struct damos_stat damon_lru_sort_cold_stat; |
| DEFINE_DAMON_MODULES_DAMOS_STATS_PARAMS(damon_lru_sort_cold_stat, |
| lru_sort_tried_cold_regions, lru_sorted_cold_regions, |
| cold_quota_exceeds); |
| |
| static struct damos_access_pattern damon_lru_sort_stub_pattern = { |
| /* Find regions having PAGE_SIZE or larger size */ |
| .min_sz_region = PAGE_SIZE, |
| .max_sz_region = ULONG_MAX, |
| /* no matter its access frequency */ |
| .min_nr_accesses = 0, |
| .max_nr_accesses = UINT_MAX, |
| /* no matter its age */ |
| .min_age_region = 0, |
| .max_age_region = UINT_MAX, |
| }; |
| |
| static struct damon_ctx *ctx; |
| static struct damon_target *target; |
| |
| static struct damos *damon_lru_sort_new_scheme( |
| struct damos_access_pattern *pattern, enum damos_action action) |
| { |
| struct damos_quota quota = damon_lru_sort_quota; |
| |
| /* Use half of total quota for hot/cold pages sorting */ |
| quota.ms = quota.ms / 2; |
| |
| return damon_new_scheme( |
| /* find the pattern, and */ |
| pattern, |
| /* (de)prioritize on LRU-lists */ |
| action, |
| /* for each aggregation interval */ |
| 0, |
| /* under the quota. */ |
| "a, |
| /* (De)activate this according to the watermarks. */ |
| &damon_lru_sort_wmarks); |
| } |
| |
| /* Create a DAMON-based operation scheme for hot memory regions */ |
| static struct damos *damon_lru_sort_new_hot_scheme(unsigned int hot_thres) |
| { |
| struct damos_access_pattern pattern = damon_lru_sort_stub_pattern; |
| |
| pattern.min_nr_accesses = hot_thres; |
| return damon_lru_sort_new_scheme(&pattern, DAMOS_LRU_PRIO); |
| } |
| |
| /* Create a DAMON-based operation scheme for cold memory regions */ |
| static struct damos *damon_lru_sort_new_cold_scheme(unsigned int cold_thres) |
| { |
| struct damos_access_pattern pattern = damon_lru_sort_stub_pattern; |
| |
| pattern.max_nr_accesses = 0; |
| pattern.min_age_region = cold_thres; |
| return damon_lru_sort_new_scheme(&pattern, DAMOS_LRU_DEPRIO); |
| } |
| |
| static int damon_lru_sort_apply_parameters(void) |
| { |
| struct damos *scheme; |
| unsigned int hot_thres, cold_thres; |
| int err = 0; |
| |
| err = damon_set_attrs(ctx, &damon_lru_sort_mon_attrs); |
| if (err) |
| return err; |
| |
| hot_thres = damon_max_nr_accesses(&damon_lru_sort_mon_attrs) * |
| hot_thres_access_freq / 1000; |
| scheme = damon_lru_sort_new_hot_scheme(hot_thres); |
| if (!scheme) |
| return -ENOMEM; |
| damon_set_schemes(ctx, &scheme, 1); |
| |
| cold_thres = cold_min_age / damon_lru_sort_mon_attrs.aggr_interval; |
| scheme = damon_lru_sort_new_cold_scheme(cold_thres); |
| if (!scheme) |
| return -ENOMEM; |
| damon_add_scheme(ctx, scheme); |
| |
| return damon_set_region_biggest_system_ram_default(target, |
| &monitor_region_start, |
| &monitor_region_end); |
| } |
| |
| static int damon_lru_sort_turn(bool on) |
| { |
| int err; |
| |
| if (!on) { |
| err = damon_stop(&ctx, 1); |
| if (!err) |
| kdamond_pid = -1; |
| return err; |
| } |
| |
| err = damon_lru_sort_apply_parameters(); |
| if (err) |
| return err; |
| |
| err = damon_start(&ctx, 1, true); |
| if (err) |
| return err; |
| kdamond_pid = ctx->kdamond->pid; |
| return 0; |
| } |
| |
| static int damon_lru_sort_enabled_store(const char *val, |
| const struct kernel_param *kp) |
| { |
| bool is_enabled = enabled; |
| bool enable; |
| int err; |
| |
| err = kstrtobool(val, &enable); |
| if (err) |
| return err; |
| |
| if (is_enabled == enable) |
| return 0; |
| |
| /* Called before init function. The function will handle this. */ |
| if (!ctx) |
| goto set_param_out; |
| |
| err = damon_lru_sort_turn(enable); |
| if (err) |
| return err; |
| |
| set_param_out: |
| enabled = enable; |
| return err; |
| } |
| |
| static const struct kernel_param_ops enabled_param_ops = { |
| .set = damon_lru_sort_enabled_store, |
| .get = param_get_bool, |
| }; |
| |
| module_param_cb(enabled, &enabled_param_ops, &enabled, 0600); |
| MODULE_PARM_DESC(enabled, |
| "Enable or disable DAMON_LRU_SORT (default: disabled)"); |
| |
| static int damon_lru_sort_handle_commit_inputs(void) |
| { |
| int err; |
| |
| if (!commit_inputs) |
| return 0; |
| |
| err = damon_lru_sort_apply_parameters(); |
| commit_inputs = false; |
| return err; |
| } |
| |
| static int damon_lru_sort_after_aggregation(struct damon_ctx *c) |
| { |
| struct damos *s; |
| |
| /* update the stats parameter */ |
| damon_for_each_scheme(s, c) { |
| if (s->action == DAMOS_LRU_PRIO) |
| damon_lru_sort_hot_stat = s->stat; |
| else if (s->action == DAMOS_LRU_DEPRIO) |
| damon_lru_sort_cold_stat = s->stat; |
| } |
| |
| return damon_lru_sort_handle_commit_inputs(); |
| } |
| |
| static int damon_lru_sort_after_wmarks_check(struct damon_ctx *c) |
| { |
| return damon_lru_sort_handle_commit_inputs(); |
| } |
| |
| static int __init damon_lru_sort_init(void) |
| { |
| int err = damon_modules_new_paddr_ctx_target(&ctx, &target); |
| |
| if (err) |
| return err; |
| |
| ctx->callback.after_wmarks_check = damon_lru_sort_after_wmarks_check; |
| ctx->callback.after_aggregation = damon_lru_sort_after_aggregation; |
| |
| /* 'enabled' has set before this function, probably via command line */ |
| if (enabled) |
| err = damon_lru_sort_turn(true); |
| |
| return err; |
| } |
| |
| module_init(damon_lru_sort_init); |