| /***************************************************************************** |
| * Copyright 2011 Broadcom Corporation. All rights reserved. |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2, available at |
| * http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). |
| * |
| * Notwithstanding the above, under no circumstances may you combine this |
| * software in any way with any other Broadcom software provided under a |
| * license other than the GPL, without Broadcom's express prior written |
| * consent. |
| *****************************************************************************/ |
| |
| #include <linux/platform_device.h> |
| |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| |
| #include "bcm2835.h" |
| |
| /* HACKY global pointers needed for successive probes to work : ssp |
| * But compared against the changes we will have to do in VC audio_ipc code |
| * to export 8 audio_ipc devices as a single IPC device and then monitor all |
| * four devices in a thread, this gets things done quickly and should be easier |
| * to debug if we run into issues |
| */ |
| |
| static struct snd_card *g_card; |
| static struct bcm2835_chip *g_chip; |
| |
| static int snd_bcm2835_free(struct bcm2835_chip *chip) |
| { |
| kfree(chip); |
| return 0; |
| } |
| |
| /* component-destructor |
| * (see "Management of Cards and Components") |
| */ |
| static int snd_bcm2835_dev_free(struct snd_device *device) |
| { |
| return snd_bcm2835_free(device->device_data); |
| } |
| |
| /* chip-specific constructor |
| * (see "Management of Cards and Components") |
| */ |
| static int snd_bcm2835_create(struct snd_card *card, |
| struct platform_device *pdev, |
| struct bcm2835_chip **rchip) |
| { |
| struct bcm2835_chip *chip; |
| int err; |
| static struct snd_device_ops ops = { |
| .dev_free = snd_bcm2835_dev_free, |
| }; |
| |
| *rchip = NULL; |
| |
| chip = kzalloc(sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->card = card; |
| |
| err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); |
| if (err < 0) { |
| snd_bcm2835_free(chip); |
| return err; |
| } |
| |
| *rchip = chip; |
| return 0; |
| } |
| |
| static int snd_bcm2835_alsa_probe_dt(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct bcm2835_chip *chip; |
| struct snd_card *card; |
| u32 numchans; |
| int err, i; |
| |
| err = of_property_read_u32(dev->of_node, "brcm,pwm-channels", |
| &numchans); |
| if (err) { |
| dev_err(dev, "Failed to get DT property 'brcm,pwm-channels'"); |
| return err; |
| } |
| |
| if (numchans == 0 || numchans > MAX_SUBSTREAMS) { |
| numchans = MAX_SUBSTREAMS; |
| dev_warn(dev, "Illegal 'brcm,pwm-channels' value, will use %u\n", |
| numchans); |
| } |
| |
| err = snd_card_new(&pdev->dev, -1, NULL, THIS_MODULE, 0, &card); |
| if (err) { |
| dev_err(dev, "Failed to create soundcard structure\n"); |
| return err; |
| } |
| |
| snd_card_set_dev(card, dev); |
| strcpy(card->driver, "bcm2835"); |
| strcpy(card->shortname, "bcm2835 ALSA"); |
| sprintf(card->longname, "%s", card->shortname); |
| |
| err = snd_bcm2835_create(card, pdev, &chip); |
| if (err < 0) { |
| dev_err(dev, "Failed to create bcm2835 chip\n"); |
| goto err_free; |
| } |
| |
| err = snd_bcm2835_new_pcm(chip); |
| if (err < 0) { |
| dev_err(dev, "Failed to create new bcm2835 pcm device\n"); |
| goto err_free; |
| } |
| |
| err = snd_bcm2835_new_spdif_pcm(chip); |
| if (err < 0) { |
| dev_err(dev, "Failed to create new bcm2835 spdif pcm device\n"); |
| goto err_free; |
| } |
| |
| err = snd_bcm2835_new_ctl(chip); |
| if (err < 0) { |
| dev_err(dev, "Failed to create new bcm2835 ctl\n"); |
| goto err_free; |
| } |
| |
| for (i = 0; i < numchans; i++) { |
| chip->avail_substreams |= (1 << i); |
| chip->pdev[i] = pdev; |
| } |
| |
| err = snd_card_register(card); |
| if (err) { |
| dev_err(dev, "Failed to register bcm2835 ALSA card\n"); |
| goto err_free; |
| } |
| |
| g_card = card; |
| g_chip = chip; |
| platform_set_drvdata(pdev, card); |
| audio_info("bcm2835 ALSA card created with %u channels\n", numchans); |
| |
| return 0; |
| |
| err_free: |
| snd_card_free(card); |
| |
| return err; |
| } |
| |
| static int snd_bcm2835_alsa_remove(struct platform_device *pdev) |
| { |
| int idx; |
| void *drv_data; |
| |
| drv_data = platform_get_drvdata(pdev); |
| |
| if (drv_data == (void *)g_card) { |
| /* This is the card device */ |
| snd_card_free((struct snd_card *)drv_data); |
| g_card = NULL; |
| g_chip = NULL; |
| } else { |
| idx = (int)(long)drv_data; |
| if (g_card) { |
| BUG_ON(!g_chip); |
| /* We pass chip device numbers in audio ipc devices |
| * other than the one we registered our card with |
| */ |
| idx = (int)(long)drv_data; |
| BUG_ON(!idx || idx > MAX_SUBSTREAMS); |
| g_chip->avail_substreams &= ~(1 << idx); |
| /* There should be atleast one substream registered |
| * after we are done here, as it wil be removed when |
| * the *remove* is called for the card device |
| */ |
| BUG_ON(!g_chip->avail_substreams); |
| } |
| } |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int snd_bcm2835_alsa_suspend(struct platform_device *pdev, |
| pm_message_t state) |
| { |
| return 0; |
| } |
| |
| static int snd_bcm2835_alsa_resume(struct platform_device *pdev) |
| { |
| return 0; |
| } |
| |
| #endif |
| |
| static const struct of_device_id snd_bcm2835_of_match_table[] = { |
| { .compatible = "brcm,bcm2835-audio",}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, snd_bcm2835_of_match_table); |
| |
| static struct platform_driver bcm2835_alsa0_driver = { |
| .probe = snd_bcm2835_alsa_probe_dt, |
| .remove = snd_bcm2835_alsa_remove, |
| #ifdef CONFIG_PM |
| .suspend = snd_bcm2835_alsa_suspend, |
| .resume = snd_bcm2835_alsa_resume, |
| #endif |
| .driver = { |
| .name = "bcm2835_AUD0", |
| .owner = THIS_MODULE, |
| .of_match_table = snd_bcm2835_of_match_table, |
| }, |
| }; |
| |
| static int bcm2835_alsa_device_init(void) |
| { |
| int retval; |
| |
| retval = platform_driver_register(&bcm2835_alsa0_driver); |
| if (retval) |
| pr_err("Error registering bcm2835_alsa0_driver %d .\n", retval); |
| |
| return retval; |
| } |
| |
| static void bcm2835_alsa_device_exit(void) |
| { |
| platform_driver_unregister(&bcm2835_alsa0_driver); |
| } |
| |
| late_initcall(bcm2835_alsa_device_init); |
| module_exit(bcm2835_alsa_device_exit); |
| |
| MODULE_AUTHOR("Dom Cobley"); |
| MODULE_DESCRIPTION("Alsa driver for BCM2835 chip"); |
| MODULE_LICENSE("GPL"); |