| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Nodes for Marvell 628x Synology devices |
| * |
| * Andrew Lunn <andrew@lunn.ch> |
| * Ben Peddell <klightspeed@killerwolves.net> |
| * |
| */ |
| |
| / { |
| ocp@f1000000 { |
| pinctrl: pin-controller@10000 { |
| pmx_alarmled_12: pmx-alarmled-12 { |
| marvell,pins = "mpp12"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanctrl_15: pmx-fanctrl-15 { |
| marvell,pins = "mpp15"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanctrl_16: pmx-fanctrl-16 { |
| marvell,pins = "mpp16"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanctrl_17: pmx-fanctrl-17 { |
| marvell,pins = "mpp17"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanalarm_18: pmx-fanalarm-18 { |
| marvell,pins = "mpp18"; |
| marvell,function = "gpo"; |
| }; |
| |
| pmx_hddled_20: pmx-hddled-20 { |
| marvell,pins = "mpp20"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_21: pmx-hddled-21 { |
| marvell,pins = "mpp21"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_22: pmx-hddled-22 { |
| marvell,pins = "mpp22"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_23: pmx-hddled-23 { |
| marvell,pins = "mpp23"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_24: pmx-hddled-24 { |
| marvell,pins = "mpp24"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_25: pmx-hddled-25 { |
| marvell,pins = "mpp25"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_26: pmx-hddled-26 { |
| marvell,pins = "mpp26"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_27: pmx-hddled-27 { |
| marvell,pins = "mpp27"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_28: pmx-hddled-28 { |
| marvell,pins = "mpp28"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 { |
| marvell,pins = "mpp29"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hdd1_pwr_30: pmx-hdd-pwr-30 { |
| marvell,pins = "mpp30"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 { |
| marvell,pins = "mpp31"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanctrl_32: pmx-fanctrl-32 { |
| marvell,pins = "mpp32"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanctrl_33: pmx-fanctrl-33 { |
| marvell,pins = "mpp33"; |
| marvell,function = "gpo"; |
| }; |
| |
| pmx_fanctrl_34: pmx-fanctrl-34 { |
| marvell,pins = "mpp34"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 { |
| marvell,pins = "mpp34"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanalarm_35: pmx-fanalarm-35 { |
| marvell,pins = "mpp35"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_36: pmx-hddled-36 { |
| marvell,pins = "mpp36"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_37: pmx-hddled-37 { |
| marvell,pins = "mpp37"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_38: pmx-hddled-38 { |
| marvell,pins = "mpp38"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_39: pmx-hddled-39 { |
| marvell,pins = "mpp39"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_40: pmx-hddled-40 { |
| marvell,pins = "mpp40"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_41: pmx-hddled-41 { |
| marvell,pins = "mpp41"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_42: pmx-hddled-42 { |
| marvell,pins = "mpp42"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_43: pmx-hddled-43 { |
| marvell,pins = "mpp43"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_44: pmx-hddled-44 { |
| marvell,pins = "mpp44"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hddled_45: pmx-hddled-45 { |
| marvell,pins = "mpp45"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 { |
| marvell,pins = "mpp44"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 { |
| marvell,pins = "mpp45"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanalarm_44: pmx-fanalarm-44 { |
| marvell,pins = "mpp44"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fanalarm_45: pmx-fanalarm-45 { |
| marvell,pins = "mpp45"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| rtc@10300 { |
| status = "disabled"; |
| }; |
| |
| spi@10600 { |
| status = "okay"; |
| |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,m25p80", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <20000000>; |
| mode = <0>; |
| |
| partition@0 { |
| reg = <0x00000000 0x00080000>; |
| label = "RedBoot"; |
| }; |
| |
| partition@80000 { |
| reg = <0x00080000 0x00200000>; |
| label = "zImage"; |
| }; |
| |
| partition@280000 { |
| reg = <0x00280000 0x00140000>; |
| label = "rd.gz"; |
| }; |
| |
| partition@3c0000 { |
| reg = <0x003c0000 0x00010000>; |
| label = "vendor"; |
| }; |
| |
| partition@3d0000 { |
| reg = <0x003d0000 0x00020000>; |
| label = "RedBoot config"; |
| }; |
| |
| partition@3f0000 { |
| reg = <0x003f0000 0x00010000>; |
| label = "FIS directory"; |
| }; |
| }; |
| }; |
| |
| i2c@11000 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| rs5c372: rs5c372@32 { |
| status = "disabled"; |
| compatible = "ricoh,rs5c372a"; |
| reg = <0x32>; |
| }; |
| |
| s35390a: s35390a@30 { |
| status = "disabled"; |
| compatible = "sii,s35390a"; |
| reg = <0x30>; |
| }; |
| }; |
| |
| serial@12000 { |
| status = "okay"; |
| }; |
| |
| serial@12100 { |
| status = "okay"; |
| }; |
| |
| poweroff@12100 { |
| compatible = "synology,power-off"; |
| reg = <0x12100 0x100>; |
| clocks = <&gate_clk 7>; |
| }; |
| |
| sata@80000 { |
| pinctrl-0 = <&pmx_sata0 &pmx_sata1>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| nr-ports = <2>; |
| }; |
| }; |
| |
| gpio-fan-150-32-35 { |
| status = "disabled"; |
| compatible = "gpio-fan"; |
| pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 |
| &pmx_fanalarm_35>; |
| pinctrl-names = "default"; |
| gpios = <&gpio1 0 GPIO_ACTIVE_HIGH |
| &gpio1 1 GPIO_ACTIVE_HIGH |
| &gpio1 2 GPIO_ACTIVE_HIGH>; |
| gpio-fan,speed-map = |
| < 0 0>, |
| <2200 1>, |
| <2500 2>, |
| <3000 4>, |
| <3300 3>, |
| <3700 5>, |
| <3800 6>, |
| <4200 7>; |
| }; |
| |
| gpio-fan-150-15-18 { |
| status = "disabled"; |
| compatible = "gpio-fan"; |
| pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| &pmx_fanalarm_18>; |
| pinctrl-names = "default"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| &gpio0 16 GPIO_ACTIVE_HIGH |
| &gpio0 17 GPIO_ACTIVE_HIGH>; |
| alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
| gpio-fan,speed-map = |
| < 0 0>, |
| <2200 1>, |
| <2500 2>, |
| <3000 4>, |
| <3300 3>, |
| <3700 5>, |
| <3800 6>, |
| <4200 7>; |
| }; |
| |
| gpio-fan-100-32-35 { |
| status = "disabled"; |
| compatible = "gpio-fan"; |
| pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34 |
| &pmx_fanalarm_35>; |
| pinctrl-names = "default"; |
| gpios = <&gpio1 0 GPIO_ACTIVE_HIGH |
| &gpio1 1 GPIO_ACTIVE_HIGH |
| &gpio1 2 GPIO_ACTIVE_HIGH>; |
| alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
| gpio-fan,speed-map = |
| < 0 0>, |
| <2500 1>, |
| <3100 2>, |
| <3800 3>, |
| <4600 4>, |
| <4800 5>, |
| <4900 6>, |
| <5000 7>; |
| }; |
| |
| gpio-fan-100-15-18 { |
| status = "disabled"; |
| compatible = "gpio-fan"; |
| pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| &pmx_fanalarm_18>; |
| pinctrl-names = "default"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| &gpio0 16 GPIO_ACTIVE_HIGH |
| &gpio0 17 GPIO_ACTIVE_HIGH>; |
| alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
| gpio-fan,speed-map = |
| < 0 0>, |
| <2500 1>, |
| <3100 2>, |
| <3800 3>, |
| <4600 4>, |
| <4800 5>, |
| <4900 6>, |
| <5000 7>; |
| }; |
| |
| gpio-fan-100-15-35-1 { |
| status = "disabled"; |
| compatible = "gpio-fan"; |
| pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| &pmx_fanalarm_35>; |
| pinctrl-names = "default"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| &gpio0 16 GPIO_ACTIVE_HIGH |
| &gpio0 17 GPIO_ACTIVE_HIGH>; |
| alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
| gpio-fan,speed-map = |
| < 0 0>, |
| <2500 1>, |
| <3100 2>, |
| <3800 3>, |
| <4600 4>, |
| <4800 5>, |
| <4900 6>, |
| <5000 7>; |
| }; |
| |
| gpio-fan-100-15-35-3 { |
| status = "disabled"; |
| compatible = "gpio-fan"; |
| pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17 |
| &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>; |
| pinctrl-names = "default"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_HIGH |
| &gpio0 16 GPIO_ACTIVE_HIGH |
| &gpio0 17 GPIO_ACTIVE_HIGH>; |
| alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH |
| &gpio1 12 GPIO_ACTIVE_HIGH |
| &gpio1 13 GPIO_ACTIVE_HIGH>; |
| gpio-fan,speed-map = |
| < 0 0>, |
| <2500 1>, |
| <3100 2>, |
| <3800 3>, |
| <4600 4>, |
| <4800 5>, |
| <4900 6>, |
| <5000 7>; |
| }; |
| |
| gpio-leds-alarm-12 { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_alarmled_12>; |
| pinctrl-names = "default"; |
| |
| led-hdd1-green { |
| label = "synology:alarm"; |
| gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-leds-hdd-20 { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22 |
| &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25 |
| &pmx_hddled_26 &pmx_hddled_27>; |
| pinctrl-names = "default"; |
| |
| led-hdd1-green { |
| label = "synology:green:hdd1"; |
| gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd1-amber { |
| label = "synology:amber:hdd1"; |
| gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-green { |
| label = "synology:green:hdd2"; |
| gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-amber { |
| label = "synology:amber:hdd2"; |
| gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd3-green { |
| label = "synology:green:hdd3"; |
| gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd3-amber { |
| label = "synology:amber:hdd3"; |
| gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd4-green { |
| label = "synology:green:hdd4"; |
| gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd4-amber { |
| label = "synology:amber:hdd4"; |
| gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-leds-hdd-21-1 { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>; |
| pinctrl-names = "default"; |
| |
| led-hdd1-green { |
| label = "synology:green:hdd1"; |
| gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd1-amber { |
| label = "synology:amber:hdd1"; |
| gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-leds-hdd-21-2 { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>; |
| pinctrl-names = "default"; |
| |
| led-hdd1-green { |
| label = "synology:green:hdd1"; |
| gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd1-amber { |
| label = "synology:amber:hdd1"; |
| gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-green { |
| label = "synology:green:hdd2"; |
| gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-amber { |
| label = "synology:amber:hdd2"; |
| gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-leds-hdd-36 { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38 |
| &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41 |
| &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44 |
| &pmx_hddled_45>; |
| pinctrl-names = "default"; |
| |
| led-hdd1-green { |
| label = "synology:green:hdd1"; |
| gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd1-amber { |
| label = "synology:amber:hdd1"; |
| gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-green { |
| label = "synology:green:hdd2"; |
| gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-amber { |
| label = "synology:amber:hdd2"; |
| gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd3-green { |
| label = "synology:green:hdd3"; |
| gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd3-amber { |
| label = "synology:amber:hdd3"; |
| gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd4-green { |
| label = "synology:green:hdd4"; |
| gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd4-amber { |
| label = "synology:amber:hdd4"; |
| gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd5-green { |
| label = "synology:green:hdd5"; |
| gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd5-amber { |
| label = "synology:amber:hdd5"; |
| gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-leds-hdd-38 { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>; |
| pinctrl-names = "default"; |
| |
| led-hdd1-green { |
| label = "synology:green:hdd1"; |
| gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd1-amber { |
| label = "synology:amber:hdd1"; |
| gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-green { |
| label = "synology:green:hdd2"; |
| gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-hdd2-amber { |
| label = "synology:amber:hdd2"; |
| gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| regulators-hdd-29 { |
| status = "disabled"; |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>; |
| pinctrl-names = "default"; |
| |
| regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "hdd1power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "hdd2power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| regulators-hdd-30-1 { |
| status = "disabled"; |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_hdd1_pwr_30>; |
| pinctrl-names = "default"; |
| |
| regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "hdd1power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| regulators-hdd-30-2 { |
| status = "disabled"; |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>; |
| pinctrl-names = "default"; |
| |
| regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "hdd1power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "hdd2power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| regulators-hdd-30-4 { |
| status = "disabled"; |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34 |
| &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>; |
| pinctrl-names = "default"; |
| |
| regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "hdd1power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "hdd2power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulator@3 { |
| compatible = "regulator-fixed"; |
| reg = <3>; |
| regulator-name = "hdd3power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulator@4 { |
| compatible = "regulator-fixed"; |
| reg = <4>; |
| regulator-name = "hdd4power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| regulators-hdd-31 { |
| status = "disabled"; |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_hdd2_pwr_31>; |
| pinctrl-names = "default"; |
| |
| regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "hdd2power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| regulators-hdd-34 { |
| status = "disabled"; |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44 |
| &pmx_hdd4_pwr_45>; |
| pinctrl-names = "default"; |
| |
| regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "hdd2power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulator@3 { |
| compatible = "regulator-fixed"; |
| reg = <3>; |
| regulator-name = "hdd3power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| regulator@4 { |
| compatible = "regulator-fixed"; |
| reg = <4>; |
| regulator-name = "hdd4power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-boot-on; |
| startup-delay-us = <5000000>; |
| gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| &mdio { |
| status = "okay"; |
| |
| ethphy0: ethernet-phy@0 { |
| device_type = "ethernet-phy"; |
| reg = <8>; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| device_type = "ethernet-phy"; |
| reg = <9>; |
| }; |
| }; |
| |
| ð0 { |
| status = "okay"; |
| |
| ethernet0-port@0 { |
| phy-handle = <ðphy0>; |
| }; |
| }; |
| |
| ð1 { |
| status = "disabled"; |
| |
| ethernet1-port@0 { |
| phy-handle = <ðphy1>; |
| }; |
| }; |
| |
| &pciec { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| status = "okay"; |
| }; |
