| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Device Tree file for the GARDENA smart Gateway (Article No. 19000) |
| * |
| * Copyright (C) 2020 GARDENA GmbH |
| */ |
| |
| /dts-v1/; |
| |
| #include "at91sam9g25.dtsi" |
| #include "at91sam9x5ek.dtsi" |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "GARDENA smart Gateway (Article No. 19000)"; |
| compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5", |
| "atmel,at91sam9"; |
| |
| aliases { |
| serial1 = &usart3; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| button { |
| label = "USER_BTN1"; |
| gpios = <&pioA 24 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_PROG1>; |
| }; |
| }; |
| |
| 1wire_cm { |
| status = "disabled"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led-power-blue { |
| label = "smartgw:power:blue"; |
| gpios = <&pioC 21 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-power-green { |
| label = "smartgw:power:green"; |
| gpios = <&pioC 20 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| }; |
| |
| led-power-red { |
| label = "smartgw:power:red"; |
| gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-radio-blue { |
| label = "smartgw:radio:blue"; |
| gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-radio-green { |
| label = "smartgw:radio:green"; |
| gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-radio-red { |
| label = "smartgw:radio:red"; |
| gpios = <&pioC 16 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-internet-blue { |
| label = "smartgw:internet:blue"; |
| gpios = <&pioC 15 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-internet-green { |
| label = "smartgw:internet:green"; |
| gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-internet-red { |
| label = "smartgw:internet:red"; |
| gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-heartbeat { |
| label = "smartgw:heartbeat"; |
| gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| led-pb18 { |
| status = "disabled"; |
| }; |
| |
| led-pd21 { |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &macb0 { |
| phy-mode = "rmii"; |
| status = "okay"; |
| }; |
| |
| &usart0 { |
| status = "disabled"; |
| }; |
| |
| &usart2 { |
| status = "disabled"; |
| }; |
| |
| &usart3 { |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "okay"; |
| |
| pinctrl-0 = <&pinctrl_usart3 |
| &pinctrl_usart3_rts |
| &pinctrl_usart3_cts |
| >; |
| }; |
| |
| &watchdog { |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| status = "disabled"; |
| }; |
| |
| &mmc1 { |
| status = "disabled"; |
| }; |
| |
| &spi0 { |
| status = "disabled"; |
| }; |
| |
| &i2c0 { |
| status = "disabled"; |
| }; |
| |
| &adc0 { |
| status = "disabled"; |
| }; |
| |
| &ssc0 { |
| status = "disabled"; |
| }; |