| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Exynos5410 SoC pin-mux and pin-config device tree source |
| * |
| * Copyright (c) 2013 Hardkernel Co., Ltd. |
| * https://www.hardkernel.com |
| */ |
| |
| #include "exynos-pinctrl.h" |
| |
| &pinctrl_0 { |
| gpa0: gpa0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpa1: gpa1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpa2: gpa2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb0: gpb0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb1: gpb1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb2: gpb2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpb3: gpb3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc0: gpc0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc3: gpc3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc1: gpc1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpc2: gpc2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpm5: gpm5-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpd1: gpd1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpe0: gpe0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpe1: gpe1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf0: gpf0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpf1: gpf1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg0: gpg0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg1: gpg1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpg2: gpg2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gph0: gph0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gph1: gph1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpm7: gpm7-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy0: gpy0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy1: gpy1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy2: gpy2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy3: gpy3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy4: gpy4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy5: gpy5-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy6: gpy6-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpy7: gpy7-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpx0: gpx0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&combiner>; |
| #interrupt-cells = <2>; |
| interrupts = <23 0>, |
| <24 0>, |
| <25 0>, |
| <25 1>, |
| <26 0>, |
| <26 1>, |
| <27 0>, |
| <27 1>; |
| }; |
| |
| gpx1: gpx1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&combiner>; |
| #interrupt-cells = <2>; |
| interrupts = <28 0>, |
| <28 1>, |
| <29 0>, |
| <29 1>, |
| <30 0>, |
| <30 1>, |
| <31 0>, |
| <31 1>; |
| }; |
| |
| gpx2: gpx2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpx3: gpx3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| uart0_data: uart0-data-pins { |
| samsung,pins = "gpa0-0", "gpa0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| uart0_fctl: uart0-fctl-pins { |
| samsung,pins = "gpa0-2", "gpa0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| uart1_data: uart1-data-pins { |
| samsung,pins = "gpa0-4", "gpa0-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| uart1_fctl: uart1-fctl-pins { |
| samsung,pins = "gpa0-6", "gpa0-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c2_bus: i2c2-bus-pins { |
| samsung,pins = "gpa0-6", "gpa0-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| uart2_data: uart2-data-pins { |
| samsung,pins = "gpa1-0", "gpa1-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| uart2_fctl: uart2-fctl-pins { |
| samsung,pins = "gpa1-2", "gpa1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c3_bus: i2c3-bus-pins { |
| samsung,pins = "gpa1-2", "gpa1-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| uart3_data: uart3-data-pins { |
| samsung,pins = "gpa1-4", "gpa1-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c4_hs_bus: i2c4-hs-bus-pins { |
| samsung,pins = "gpa2-0", "gpa2-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c5_hs_bus: i2c5-hs-bus-pins { |
| samsung,pins = "gpa2-2", "gpa2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c6_hs_bus: i2c6-hs-bus-pins { |
| samsung,pins = "gpb1-3", "gpb1-4"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_4>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| pwm0_out: pwm0-out-pins { |
| samsung,pins = "gpb2-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| pwm1_out: pwm1-out-pins { |
| samsung,pins = "gpb2-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| pwm2_out: pwm2-out-pins { |
| samsung,pins = "gpb2-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| pwm3_out: pwm3-out-pins { |
| samsung,pins = "gpb2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c7_hs_bus: i2c7-hs-bus-pins { |
| samsung,pins = "gpb2-2", "gpb2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c0_bus: i2c0-bus-pins { |
| samsung,pins = "gpb3-0", "gpb3-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| i2c1_bus: i2c1-bus-pins { |
| samsung,pins = "gpb3-2", "gpb3-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| sd0_clk: sd0-clk-pins { |
| samsung,pins = "gpc0-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_cmd: sd0-cmd-pins { |
| samsung,pins = "gpc0-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_cd: sd0-cd-pins { |
| samsung,pins = "gpc0-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_bus1: sd0-bus-width1-pins { |
| samsung,pins = "gpc0-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_bus4: sd0-bus-width4-pins { |
| samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd2_clk: sd2-clk-pins { |
| samsung,pins = "gpc2-0"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd2_cmd: sd2-cmd-pins { |
| samsung,pins = "gpc2-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd2_cd: sd2-cd-pins { |
| samsung,pins = "gpc2-2"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd2_bus1: sd2-bus-width1-pins { |
| samsung,pins = "gpc2-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd2_bus4: sd2-bus-width4-pins { |
| samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| |
| sd0_bus8: sd0-bus-width8-pins { |
| samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| }; |
| }; |
| |
| &pinctrl_1 { |
| gpj0: gpj0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpj1: gpj1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpj2: gpj2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpj3: gpj3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpj4: gpj4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpk0: gpk0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpk1: gpk1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpk2: gpk2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpk3: gpk3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| usb3_1_oc: usb3-1-oc-pins { |
| samsung,pins = "gpk2-4", "gpk2-5"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| usb3_1_vbusctrl: usb3-1-vbusctrl-pins { |
| samsung,pins = "gpk2-6", "gpk2-7"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| usb3_0_oc: usb3-0-oc-pins { |
| samsung,pins = "gpk3-0", "gpk3-1"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| |
| usb3_0_vbusctrl: usb3-0-vbusctrl-pins { |
| samsung,pins = "gpk3-2", "gpk3-3"; |
| samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| }; |
| }; |
| |
| &pinctrl_2 { |
| gpv0: gpv0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpv1: gpv1-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpv2: gpv2-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpv3: gpv3-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpv4: gpv4-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| &pinctrl_3 { |
| gpz: gpz-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| audi2s0_bus: audi2s0-bus-pins { |
| samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", |
| "gpz-4"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| }; |
