| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung Exynos5420 SoC device tree source |
| * |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Samsung Exynos5420 SoC device nodes are listed in this file. |
| * Exynos5420 based board files can include this file and provide |
| * values for board specific bindings. |
| */ |
| |
| #include "exynos54xx.dtsi" |
| #include <dt-bindings/clock/exynos5420.h> |
| #include <dt-bindings/clock/exynos-audss-clk.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "samsung,exynos5420", "samsung,exynos5"; |
| |
| aliases { |
| pinctrl0 = &pinctrl_0; |
| pinctrl1 = &pinctrl_1; |
| pinctrl2 = &pinctrl_2; |
| pinctrl3 = &pinctrl_3; |
| pinctrl4 = &pinctrl_4; |
| i2c8 = &hsi2c_8; |
| i2c9 = &hsi2c_9; |
| i2c10 = &hsi2c_10; |
| gsc0 = &gsc_0; |
| gsc1 = &gsc_1; |
| spi0 = &spi_0; |
| spi1 = &spi_1; |
| spi2 = &spi_2; |
| }; |
| |
| bus_disp1: bus-disp1 { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK400_DISP1>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_disp1_fimd: bus-disp1-fimd { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK300_DISP1>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_fsys: bus-fsys { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK200_FSYS>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_fsys2: bus-fsys2 { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_fsys_apb: bus-fsys-apb { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_PCLK200_FSYS>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_g2d: bus-g2d { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK333_G2D>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_g2d_acp: bus-g2d-acp { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK266_G2D>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| bus_gen: bus-gen { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK266>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_gscl_scaler: bus-gscl-scaler { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK300_GSCL>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_jpeg: bus-jpeg { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK300_JPEG>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_jpeg_apb: bus-jpeg-apb { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK166>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_mfc: bus-mfc { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK333>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_mscl: bus-mscl { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK400_MSCL>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_noc: bus-noc { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK100_NOC>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_peri: bus-peri { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK66>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| bus_wcore: bus-wcore { |
| compatible = "samsung,exynos-bus"; |
| clocks = <&clock CLK_DOUT_ACLK400_WCORE>; |
| clock-names = "bus"; |
| status = "disabled"; |
| }; |
| |
| /* |
| * The 'cpus' node is not present here but instead it is provided |
| * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. |
| */ |
| |
| cluster_a15_opp_table: opp-table-0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-1800000000 { |
| opp-hz = /bits/ 64 <1800000000>; |
| opp-microvolt = <1250000 1250000 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1700000000 { |
| opp-hz = /bits/ 64 <1700000000>; |
| opp-microvolt = <1212500 1212500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1600000000 { |
| opp-hz = /bits/ 64 <1600000000>; |
| opp-microvolt = <1175000 1175000 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1500000000 { |
| opp-hz = /bits/ 64 <1500000000>; |
| opp-microvolt = <1137500 1137500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1400000000 { |
| opp-hz = /bits/ 64 <1400000000>; |
| opp-microvolt = <1112500 1112500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1300000000 { |
| opp-hz = /bits/ 64 <1300000000>; |
| opp-microvolt = <1062500 1062500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1037500 1037500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1100000000 { |
| opp-hz = /bits/ 64 <1100000000>; |
| opp-microvolt = <1012500 1012500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1000000000 { |
| opp-hz = /bits/ 64 <1000000000>; |
| opp-microvolt = < 987500 987500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-900000000 { |
| opp-hz = /bits/ 64 <900000000>; |
| opp-microvolt = < 962500 962500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| opp-microvolt = < 937500 937500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-700000000 { |
| opp-hz = /bits/ 64 <700000000>; |
| opp-microvolt = < 912500 912500 1500000>; |
| clock-latency-ns = <140000>; |
| }; |
| }; |
| |
| cluster_a7_opp_table: opp-table-1 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-1300000000 { |
| opp-hz = /bits/ 64 <1300000000>; |
| opp-microvolt = <1275000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1200000000 { |
| opp-hz = /bits/ 64 <1200000000>; |
| opp-microvolt = <1212500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1100000000 { |
| opp-hz = /bits/ 64 <1100000000>; |
| opp-microvolt = <1162500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-1000000000 { |
| opp-hz = /bits/ 64 <1000000000>; |
| opp-microvolt = <1112500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-900000000 { |
| opp-hz = /bits/ 64 <900000000>; |
| opp-microvolt = <1062500>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| opp-microvolt = <1025000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-700000000 { |
| opp-hz = /bits/ 64 <700000000>; |
| opp-microvolt = <975000>; |
| clock-latency-ns = <140000>; |
| }; |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <937500>; |
| clock-latency-ns = <140000>; |
| }; |
| }; |
| |
| soc: soc { |
| cci: cci@10d20000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x10d20000 0x1000>; |
| ranges = <0x0 0x10d20000 0x6000>; |
| |
| cci_control0: slave-if@4000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x4000 0x1000>; |
| }; |
| cci_control1: slave-if@5000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x5000 0x1000>; |
| }; |
| }; |
| |
| clock: clock-controller@10010000 { |
| compatible = "samsung,exynos5420-clock", "syscon"; |
| reg = <0x10010000 0x30000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_audss: audss-clock-controller@3810000 { |
| compatible = "samsung,exynos5420-audss-clock"; |
| reg = <0x03810000 0x0c>; |
| #clock-cells = <1>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, |
| <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; |
| clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; |
| power-domains = <&mau_pd>; |
| }; |
| |
| mfc: codec@11000000 { |
| compatible = "samsung,mfc-v7"; |
| reg = <0x11000000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MFC>; |
| clock-names = "mfc"; |
| power-domains = <&mfc_pd>; |
| iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; |
| iommu-names = "left", "right"; |
| }; |
| |
| mmc_0: mmc@12200000 { |
| compatible = "samsung,exynos5420-dw-mshc-smu"; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12200000 0x2000>; |
| clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_1: mmc@12210000 { |
| compatible = "samsung,exynos5420-dw-mshc-smu"; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12210000 0x2000>; |
| clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_2: mmc@12220000 { |
| compatible = "samsung,exynos5420-dw-mshc"; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12220000 0x1000>; |
| clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| dmc: memory-controller@10c20000 { |
| compatible = "samsung,exynos5422-dmc"; |
| reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; |
| clocks = <&clock CLK_FOUT_SPLL>, |
| <&clock CLK_MOUT_SCLK_SPLL>, |
| <&clock CLK_FF_DOUT_SPLL2>, |
| <&clock CLK_FOUT_BPLL>, |
| <&clock CLK_MOUT_BPLL>, |
| <&clock CLK_SCLK_BPLL>, |
| <&clock CLK_MOUT_MX_MSPLL_CCORE>, |
| <&clock CLK_MOUT_MCLK_CDREX>; |
| clock-names = "fout_spll", |
| "mout_sclk_spll", |
| "ff_dout_spll2", |
| "fout_bpll", |
| "mout_bpll", |
| "sclk_bpll", |
| "mout_mx_mspll_ccore", |
| "mout_mclk_cdrex"; |
| samsung,syscon-clk = <&clock>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem0_0: nocp@10ca1000 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10ca1000 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem0_1: nocp@10ca1400 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10ca1400 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem1_0: nocp@10ca1800 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10ca1800 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_mem1_1: nocp@10ca1c00 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x10ca1c00 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_g3d_0: nocp@11a51000 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x11a51000 0x200>; |
| status = "disabled"; |
| }; |
| |
| nocp_g3d_1: nocp@11a51400 { |
| compatible = "samsung,exynos5420-nocp"; |
| reg = <0x11a51400 0x200>; |
| status = "disabled"; |
| }; |
| |
| ppmu_dmc0_0: ppmu@10d00000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x10d00000 0x2000>; |
| clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; |
| clock-names = "ppmu"; |
| events { |
| ppmu_event3_dmc0_0: ppmu-event3-dmc0-0 { |
| event-name = "ppmu-event3-dmc0-0"; |
| }; |
| }; |
| }; |
| |
| ppmu_dmc0_1: ppmu@10d10000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x10d10000 0x2000>; |
| clocks = <&clock CLK_PCLK_PPMU_DREX0_1>; |
| clock-names = "ppmu"; |
| events { |
| ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 { |
| event-name = "ppmu-event3-dmc0-1"; |
| }; |
| }; |
| }; |
| |
| ppmu_dmc1_0: ppmu@10d60000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x10d60000 0x2000>; |
| clocks = <&clock CLK_PCLK_PPMU_DREX1_0>; |
| clock-names = "ppmu"; |
| events { |
| ppmu_event3_dmc1_0: ppmu-event3-dmc1-0 { |
| event-name = "ppmu-event3-dmc1-0"; |
| }; |
| }; |
| }; |
| |
| ppmu_dmc1_1: ppmu@10d70000 { |
| compatible = "samsung,exynos-ppmu"; |
| reg = <0x10d70000 0x2000>; |
| clocks = <&clock CLK_PCLK_PPMU_DREX1_1>; |
| clock-names = "ppmu"; |
| events { |
| ppmu_event3_dmc1_1: ppmu-event3-dmc1-1 { |
| event-name = "ppmu-event3-dmc1-1"; |
| }; |
| }; |
| }; |
| |
| gsc_pd: power-domain@10044000 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044000 0x20>; |
| #power-domain-cells = <0>; |
| label = "GSC"; |
| }; |
| |
| isp_pd: power-domain@10044020 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044020 0x20>; |
| #power-domain-cells = <0>; |
| label = "ISP"; |
| }; |
| |
| mfc_pd: power-domain@10044060 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044060 0x20>; |
| #power-domain-cells = <0>; |
| label = "MFC"; |
| }; |
| |
| g3d_pd: power-domain@10044080 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044080 0x20>; |
| #power-domain-cells = <0>; |
| label = "G3D"; |
| }; |
| |
| disp_pd: power-domain@100440c0 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x100440c0 0x20>; |
| #power-domain-cells = <0>; |
| label = "DISP"; |
| }; |
| |
| mau_pd: power-domain@100440e0 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x100440e0 0x20>; |
| #power-domain-cells = <0>; |
| label = "MAU"; |
| }; |
| |
| msc_pd: power-domain@10044120 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044120 0x20>; |
| #power-domain-cells = <0>; |
| label = "MSC"; |
| }; |
| |
| pinctrl_0: pinctrl@13400000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x13400000 0x1000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos4210-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pinctrl_1: pinctrl@13410000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x13410000 0x1000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_2: pinctrl@14000000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x14000000 0x1000>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_3: pinctrl@14010000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x14010000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_4: pinctrl@3860000 { |
| compatible = "samsung,exynos5420-pinctrl"; |
| reg = <0x03860000 0x1000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&mau_pd>; |
| }; |
| |
| adma: dma-controller@3880000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x03880000 0x1000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_audss EXYNOS_ADMA>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| power-domains = <&mau_pd>; |
| }; |
| |
| pdma0: dma-controller@121a0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121a0000 0x1000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| pdma1: dma-controller@121b0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121b0000 0x1000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| mdma0: dma-controller@10800000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10800000 0x1000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| mdma1: dma-controller@11c10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x11c10000 0x1000>; |
| interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| /* |
| * MDMA1 can support both secure and non-secure |
| * AXI transactions. When this is enabled in |
| * the kernel for boards that run in secure |
| * mode, we are getting imprecise external |
| * aborts causing the kernel to oops. |
| */ |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@3830000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x03830000 0x100>; |
| dmas = <&adma 0>, |
| <&adma 2>, |
| <&adma 1>; |
| dma-names = "tx", "rx", "tx-sec"; |
| clocks = <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_SCLK_I2S>; |
| clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| #clock-cells = <1>; |
| clock-output-names = "i2s_cdclk0"; |
| #sound-dai-cells = <1>; |
| samsung,idma-addr = <0x03000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_bus>; |
| power-domains = <&mau_pd>; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@12d60000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x12d60000 0x100>; |
| dmas = <&pdma1 12>, |
| <&pdma1 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; |
| clock-names = "iis", "i2s_opclk0"; |
| #clock-cells = <1>; |
| clock-output-names = "i2s_cdclk1"; |
| #sound-dai-cells = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@12d70000 { |
| compatible = "samsung,exynos5420-i2s"; |
| reg = <0x12d70000 0x100>; |
| dmas = <&pdma0 12>, |
| <&pdma0 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; |
| clock-names = "iis", "i2s_opclk0"; |
| #clock-cells = <1>; |
| clock-output-names = "i2s_cdclk2"; |
| #sound-dai-cells = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s2_bus>; |
| status = "disabled"; |
| }; |
| |
| spi_0: spi@12d20000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d20000 0x100>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma0 5 |
| &pdma0 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus>; |
| clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; |
| clock-names = "spi", "spi_busclk0"; |
| fifo-depth = <256>; |
| status = "disabled"; |
| }; |
| |
| spi_1: spi@12d30000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d30000 0x100>; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma1 5 |
| &pdma1 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus>; |
| clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; |
| clock-names = "spi", "spi_busclk0"; |
| fifo-depth = <64>; |
| status = "disabled"; |
| }; |
| |
| spi_2: spi@12d40000 { |
| compatible = "samsung,exynos4210-spi"; |
| reg = <0x12d40000 0x100>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma0 7 |
| &pdma0 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_bus>; |
| clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; |
| clock-names = "spi", "spi_busclk0"; |
| fifo-depth = <64>; |
| status = "disabled"; |
| }; |
| |
| dsi: dsi@14500000 { |
| compatible = "samsung,exynos5410-mipi-dsi"; |
| reg = <0x14500000 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&mipi_phy 1>; |
| phy-names = "dsim"; |
| clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; |
| clock-names = "bus_clk", "pll_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_8: i2c@12e00000 { |
| compatible = "samsung,exynos5250-hsi2c"; |
| reg = <0x12e00000 0x1000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c8_hs_bus>; |
| clocks = <&clock CLK_USI4>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_9: i2c@12e10000 { |
| compatible = "samsung,exynos5250-hsi2c"; |
| reg = <0x12e10000 0x1000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c9_hs_bus>; |
| clocks = <&clock CLK_USI5>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_10: i2c@12e20000 { |
| compatible = "samsung,exynos5250-hsi2c"; |
| reg = <0x12e20000 0x1000>; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c10_hs_bus>; |
| clocks = <&clock CLK_USI6>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hdmi: hdmi@14530000 { |
| compatible = "samsung,exynos5420-hdmi"; |
| reg = <0x14530000 0x70000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, |
| <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, |
| <&clock CLK_MOUT_HDMI>; |
| clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", |
| "sclk_hdmiphy", "mout_hdmi"; |
| phy = <&hdmiphy>; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| power-domains = <&disp_pd>; |
| #sound-dai-cells = <0>; |
| }; |
| |
| hdmiphy: hdmi-phy@145d0000 { |
| reg = <0x145d0000 0x20>; |
| }; |
| |
| hdmicec: cec@101b0000 { |
| compatible = "samsung,s5p-cec"; |
| reg = <0x101b0000 0x200>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_HDMI_CEC>; |
| clock-names = "hdmicec"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| hdmi-phandle = <&hdmi>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_cec>; |
| status = "disabled"; |
| }; |
| |
| mixer: mixer@14450000 { |
| compatible = "samsung,exynos5420-mixer"; |
| reg = <0x14450000 0x10000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, |
| <&clock CLK_SCLK_HDMI>; |
| clock-names = "mixer", "hdmi", "sclk_hdmi"; |
| power-domains = <&disp_pd>; |
| iommus = <&sysmmu_tv>; |
| status = "disabled"; |
| }; |
| |
| rotator: rotator@11c00000 { |
| compatible = "samsung,exynos5250-rotator"; |
| reg = <0x11c00000 0x64>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_ROTATOR>; |
| clock-names = "rotator"; |
| iommus = <&sysmmu_rotator>; |
| }; |
| |
| gsc_0: video-scaler@13e00000 { |
| compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; |
| reg = <0x13e00000 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_GSCL0>; |
| clock-names = "gscl"; |
| power-domains = <&gsc_pd>; |
| iommus = <&sysmmu_gscl0>; |
| }; |
| |
| gsc_1: video-scaler@13e10000 { |
| compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc"; |
| reg = <0x13e10000 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_GSCL1>; |
| clock-names = "gscl"; |
| power-domains = <&gsc_pd>; |
| iommus = <&sysmmu_gscl1>; |
| }; |
| |
| gpu: gpu@11800000 { |
| compatible = "samsung,exynos5420-mali", "arm,mali-t628"; |
| reg = <0x11800000 0x5000>; |
| interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "job", "mmu", "gpu"; |
| |
| clocks = <&clock CLK_G3D>; |
| clock-names = "core"; |
| power-domains = <&g3d_pd>; |
| operating-points-v2 = <&gpu_opp_table>; |
| |
| status = "disabled"; |
| #cooling-cells = <2>; |
| |
| gpu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-177000000 { |
| opp-hz = /bits/ 64 <177000000>; |
| opp-microvolt = <812500>; |
| }; |
| opp-266000000 { |
| opp-hz = /bits/ 64 <266000000>; |
| opp-microvolt = <862500>; |
| }; |
| opp-350000000 { |
| opp-hz = /bits/ 64 <350000000>; |
| opp-microvolt = <912500>; |
| }; |
| opp-420000000 { |
| opp-hz = /bits/ 64 <420000000>; |
| opp-microvolt = <962500>; |
| }; |
| opp-480000000 { |
| opp-hz = /bits/ 64 <480000000>; |
| opp-microvolt = <1000000>; |
| }; |
| opp-543000000 { |
| opp-hz = /bits/ 64 <543000000>; |
| opp-microvolt = <1037500>; |
| }; |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| opp-microvolt = <1150000>; |
| }; |
| }; |
| }; |
| |
| scaler_0: scaler@12800000 { |
| compatible = "samsung,exynos5420-scaler"; |
| reg = <0x12800000 0x1294>; |
| interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MSCL0>; |
| clock-names = "mscl"; |
| power-domains = <&msc_pd>; |
| iommus = <&sysmmu_scaler0r>, <&sysmmu_scaler0w>; |
| }; |
| |
| scaler_1: scaler@12810000 { |
| compatible = "samsung,exynos5420-scaler"; |
| reg = <0x12810000 0x1294>; |
| interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MSCL1>; |
| clock-names = "mscl"; |
| power-domains = <&msc_pd>; |
| iommus = <&sysmmu_scaler1r>, <&sysmmu_scaler1w>; |
| }; |
| |
| scaler_2: scaler@12820000 { |
| compatible = "samsung,exynos5420-scaler"; |
| reg = <0x12820000 0x1294>; |
| interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MSCL2>; |
| clock-names = "mscl"; |
| power-domains = <&msc_pd>; |
| iommus = <&sysmmu_scaler2r>, <&sysmmu_scaler2w>; |
| }; |
| |
| jpeg_0: jpeg@11f50000 { |
| compatible = "samsung,exynos5420-jpeg"; |
| reg = <0x11f50000 0x1000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "jpeg"; |
| clocks = <&clock CLK_JPEG>; |
| iommus = <&sysmmu_jpeg0>; |
| }; |
| |
| jpeg_1: jpeg@11f60000 { |
| compatible = "samsung,exynos5420-jpeg"; |
| reg = <0x11f60000 0x1000>; |
| interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "jpeg"; |
| clocks = <&clock CLK_JPEG2>; |
| iommus = <&sysmmu_jpeg1>; |
| }; |
| |
| pmu_system_controller: system-controller@10040000 { |
| compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon"; |
| reg = <0x10040000 0x5000>; |
| clock-names = "clkout16"; |
| clocks = <&clock CLK_FIN_PLL>; |
| #clock-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| |
| dp_phy: dp-phy { |
| compatible = "samsung,exynos5420-dp-video-phy"; |
| #phy-cells = <0>; |
| }; |
| |
| mipi_phy: mipi-phy { |
| compatible = "samsung,exynos5420-mipi-video-phy"; |
| #phy-cells = <1>; |
| }; |
| }; |
| |
| tmu_cpu0: tmu@10060000 { |
| compatible = "samsung,exynos5420-tmu"; |
| reg = <0x10060000 0x100>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>; |
| clock-names = "tmu_apbif"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| tmu_cpu1: tmu@10064000 { |
| compatible = "samsung,exynos5420-tmu"; |
| reg = <0x10064000 0x100>; |
| interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>; |
| clock-names = "tmu_apbif"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| tmu_cpu2: tmu@10068000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x10068000 0x100>, <0x1006c000 0x4>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| tmu_cpu3: tmu@1006c000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x1006c000 0x100>, <0x100a0000 0x4>; |
| interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| tmu_gpu: tmu@100a0000 { |
| compatible = "samsung,exynos5420-tmu-ext-triminfo"; |
| reg = <0x100a0000 0x100>, <0x10068000 0x4>; |
| interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_triminfo_apbif"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| sysmmu_g2dr: sysmmu@10a60000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x10a60000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <24 5>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_g2dw: sysmmu@10a70000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x10a70000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <22 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_tv: sysmmu@14650000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14650000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <7 4>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; |
| power-domains = <&disp_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gscl0: sysmmu@13e80000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13e80000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; |
| power-domains = <&gsc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gscl1: sysmmu@13e90000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13e90000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; |
| power-domains = <&gsc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler0r: sysmmu@12880000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x12880000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <22 4>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; |
| power-domains = <&msc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler1r: sysmmu@12890000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x12890000 0x1000>; |
| interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; |
| power-domains = <&msc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler2r: sysmmu@128a0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128a0000 0x1000>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; |
| power-domains = <&msc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler0w: sysmmu@128c0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128c0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <27 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; |
| power-domains = <&msc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler1w: sysmmu@128d0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128d0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <22 6>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; |
| power-domains = <&msc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_scaler2w: sysmmu@128e0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x128e0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <19 6>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; |
| power-domains = <&msc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_rotator: sysmmu@11d40000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11d40000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <4 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_jpeg0: sysmmu@11f10000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11f10000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <4 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_jpeg1: sysmmu@11f20000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11f20000 0x1000>; |
| interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_mfc_l: sysmmu@11200000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11200000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <6 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; |
| power-domains = <&mfc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_mfc_r: sysmmu@11210000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11210000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <8 5>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; |
| power-domains = <&mfc_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimd1_0: sysmmu@14640000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14640000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <3 2>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; |
| power-domains = <&disp_pd>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimd1_1: sysmmu@14680000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14680000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <3 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; |
| power-domains = <&disp_pd>; |
| #iommu-cells = <0>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu0_thermal: cpu0-thermal { |
| thermal-sensors = <&tmu_cpu0>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu1_thermal: cpu1-thermal { |
| thermal-sensors = <&tmu_cpu1>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu2_thermal: cpu2-thermal { |
| thermal-sensors = <&tmu_cpu2>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| cpu3_thermal: cpu3-thermal { |
| thermal-sensors = <&tmu_cpu3>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| gpu_thermal: gpu-thermal { |
| thermal-sensors = <&tmu_gpu>; |
| #include "exynos5420-trip-points.dtsi" |
| }; |
| }; |
| }; |
| |
| &adc { |
| clocks = <&clock CLK_TSADC>; |
| clock-names = "adc"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| }; |
| |
| &dp { |
| clocks = <&clock CLK_DP1>; |
| clock-names = "dp"; |
| phys = <&dp_phy>; |
| phy-names = "dp"; |
| power-domains = <&disp_pd>; |
| }; |
| |
| &fimd { |
| compatible = "samsung,exynos5420-fimd"; |
| clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; |
| clock-names = "sclk_fimd", "fimd"; |
| power-domains = <&disp_pd>; |
| iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>; |
| iommu-names = "m0", "m1"; |
| }; |
| |
| &g2d { |
| iommus = <&sysmmu_g2dr>, <&sysmmu_g2dw>; |
| clocks = <&clock CLK_G2D>; |
| clock-names = "fimg2d"; |
| status = "okay"; |
| }; |
| |
| &i2c_0 { |
| clocks = <&clock CLK_I2C0>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_bus>; |
| }; |
| |
| &i2c_1 { |
| clocks = <&clock CLK_I2C1>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_bus>; |
| }; |
| |
| &i2c_2 { |
| clocks = <&clock CLK_I2C2>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_bus>; |
| }; |
| |
| &i2c_3 { |
| clocks = <&clock CLK_I2C3>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_bus>; |
| }; |
| |
| &hsi2c_4 { |
| clocks = <&clock CLK_USI0>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_hs_bus>; |
| }; |
| |
| &hsi2c_5 { |
| clocks = <&clock CLK_USI1>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_hs_bus>; |
| }; |
| |
| &hsi2c_6 { |
| clocks = <&clock CLK_USI2>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_hs_bus>; |
| }; |
| |
| &hsi2c_7 { |
| clocks = <&clock CLK_USI3>; |
| clock-names = "hsi2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_hs_bus>; |
| }; |
| |
| &mct { |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; |
| clock-names = "fin_pll", "mct"; |
| }; |
| |
| &prng { |
| clocks = <&clock CLK_SSS>; |
| clock-names = "secss"; |
| }; |
| |
| &pwm { |
| clocks = <&clock CLK_PWM>; |
| clock-names = "timers"; |
| }; |
| |
| &rtc { |
| clocks = <&clock CLK_RTC>; |
| clock-names = "rtc"; |
| interrupt-parent = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| &serial_0 { |
| clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma0 13>, <&pdma0 14>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_1 { |
| clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma1 15>, <&pdma1 16>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_2 { |
| clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma0 15>, <&pdma0 16>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_3 { |
| clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma1 17>, <&pdma1 18>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &sss { |
| clocks = <&clock CLK_SSS>; |
| clock-names = "secss"; |
| }; |
| |
| &trng { |
| clocks = <&clock CLK_SSS>; |
| clock-names = "secss"; |
| }; |
| |
| &usbdrd3_0 { |
| clocks = <&clock CLK_USBD300>; |
| clock-names = "usbdrd30"; |
| }; |
| |
| &usbdrd_phy0 { |
| clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; |
| clock-names = "phy", "ref"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| }; |
| |
| &usbdrd3_1 { |
| clocks = <&clock CLK_USBD301>; |
| clock-names = "usbdrd30"; |
| }; |
| |
| &usbdrd_dwc3_1 { |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| &usbdrd_phy1 { |
| clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; |
| clock-names = "phy", "ref"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| }; |
| |
| &usbhost1 { |
| clocks = <&clock CLK_USBH20>; |
| clock-names = "usbhost"; |
| }; |
| |
| &usbhost2 { |
| clocks = <&clock CLK_USBH20>; |
| clock-names = "usbhost"; |
| }; |
| |
| &usb2_phy { |
| clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; |
| clock-names = "phy", "ref"; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| samsung,pmureg-phandle = <&pmu_system_controller>; |
| }; |
| |
| &watchdog { |
| clocks = <&clock CLK_WDT>; |
| clock-names = "watchdog"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| }; |
| |
| #include "exynos5420-pinctrl.dtsi" |
| #include "exynos-syscon-restart.dtsi" |