| // SPDX-License-Identifier: GPL-2.0 |
| /* Various workarounds for chipset bugs. |
| This code runs very early and can't use the regular PCI subsystem |
| The entries are keyed to PCI bridges which usually identify chipsets |
| uniquely. |
| This is only for whole classes of chipsets with specific problems which |
| need early invasive action (e.g. before the timers are initialized). |
| Most PCI device specific workarounds can be done later and should be |
| in standard PCI quirks |
| Mainboard specific bugs should be handled by DMI entries. |
| CPU specific bugs in setup.c */ |
| |
| #include <linux/pci.h> |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/pci_ids.h> |
| #include <linux/bcma/bcma.h> |
| #include <linux/bcma/bcma_regs.h> |
| #include <linux/platform_data/x86/apple.h> |
| #include <drm/intel/i915_drm.h> |
| #include <drm/intel/i915_pciids.h> |
| #include <asm/pci-direct.h> |
| #include <asm/dma.h> |
| #include <asm/io_apic.h> |
| #include <asm/apic.h> |
| #include <asm/hpet.h> |
| #include <asm/iommu.h> |
| #include <asm/gart.h> |
| #include <asm/irq_remapping.h> |
| #include <asm/early_ioremap.h> |
| |
| static void __init fix_hypertransport_config(int num, int slot, int func) |
| { |
| u32 htcfg; |
| /* |
| * we found a hypertransport bus |
| * make sure that we are broadcasting |
| * interrupts to all cpus on the ht bus |
| * if we're using extended apic ids |
| */ |
| htcfg = read_pci_config(num, slot, func, 0x68); |
| if (htcfg & (1 << 18)) { |
| printk(KERN_INFO "Detected use of extended apic ids " |
| "on hypertransport bus\n"); |
| if ((htcfg & (1 << 17)) == 0) { |
| printk(KERN_INFO "Enabling hypertransport extended " |
| "apic interrupt broadcast\n"); |
| printk(KERN_INFO "Note this is a bios bug, " |
| "please contact your hw vendor\n"); |
| htcfg |= (1 << 17); |
| write_pci_config(num, slot, func, 0x68, htcfg); |
| } |
| } |
| |
| |
| } |
| |
| static void __init via_bugs(int num, int slot, int func) |
| { |
| #ifdef CONFIG_GART_IOMMU |
| if ((max_pfn > MAX_DMA32_PFN || force_iommu) && |
| !gart_iommu_aperture_allowed) { |
| printk(KERN_INFO |
| "Looks like a VIA chipset. Disabling IOMMU." |
| " Override with iommu=allowed\n"); |
| gart_iommu_aperture_disabled = 1; |
| } |
| #endif |
| } |
| |
| #ifdef CONFIG_ACPI |
| #ifdef CONFIG_X86_IO_APIC |
| |
| static int __init nvidia_hpet_check(struct acpi_table_header *header) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_X86_IO_APIC */ |
| #endif /* CONFIG_ACPI */ |
| |
| static void __init nvidia_bugs(int num, int slot, int func) |
| { |
| #ifdef CONFIG_ACPI |
| #ifdef CONFIG_X86_IO_APIC |
| /* |
| * Only applies to Nvidia root ports (bus 0) and not to |
| * Nvidia graphics cards with PCI ports on secondary buses. |
| */ |
| if (num) |
| return; |
| |
| /* |
| * All timer overrides on Nvidia are |
| * wrong unless HPET is enabled. |
| * Unfortunately that's not true on many Asus boards. |
| * We don't know yet how to detect this automatically, but |
| * at least allow a command line override. |
| */ |
| if (acpi_use_timer_override) |
| return; |
| |
| if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) { |
| acpi_skip_timer_override = 1; |
| printk(KERN_INFO "Nvidia board " |
| "detected. Ignoring ACPI " |
| "timer override.\n"); |
| printk(KERN_INFO "If you got timer trouble " |
| "try acpi_use_timer_override\n"); |
| } |
| #endif |
| #endif |
| /* RED-PEN skip them on mptables too? */ |
| |
| } |
| |
| #if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC) |
| static u32 __init ati_ixp4x0_rev(int num, int slot, int func) |
| { |
| u32 d; |
| u8 b; |
| |
| b = read_pci_config_byte(num, slot, func, 0xac); |
| b &= ~(1<<5); |
| write_pci_config_byte(num, slot, func, 0xac, b); |
| |
| d = read_pci_config(num, slot, func, 0x70); |
| d |= 1<<8; |
| write_pci_config(num, slot, func, 0x70, d); |
| |
| d = read_pci_config(num, slot, func, 0x8); |
| d &= 0xff; |
| return d; |
| } |
| |
| static void __init ati_bugs(int num, int slot, int func) |
| { |
| u32 d; |
| u8 b; |
| |
| if (acpi_use_timer_override) |
| return; |
| |
| d = ati_ixp4x0_rev(num, slot, func); |
| if (d < 0x82) |
| acpi_skip_timer_override = 1; |
| else { |
| /* check for IRQ0 interrupt swap */ |
| outb(0x72, 0xcd6); b = inb(0xcd7); |
| if (!(b & 0x2)) |
| acpi_skip_timer_override = 1; |
| } |
| |
| if (acpi_skip_timer_override) { |
| printk(KERN_INFO "SB4X0 revision 0x%x\n", d); |
| printk(KERN_INFO "Ignoring ACPI timer override.\n"); |
| printk(KERN_INFO "If you got timer trouble " |
| "try acpi_use_timer_override\n"); |
| } |
| } |
| |
| static u32 __init ati_sbx00_rev(int num, int slot, int func) |
| { |
| u32 d; |
| |
| d = read_pci_config(num, slot, func, 0x8); |
| d &= 0xff; |
| |
| return d; |
| } |
| |
| static void __init ati_bugs_contd(int num, int slot, int func) |
| { |
| u32 d, rev; |
| |
| rev = ati_sbx00_rev(num, slot, func); |
| if (rev >= 0x40) |
| acpi_fix_pin2_polarity = 1; |
| |
| /* |
| * SB600: revisions 0x11, 0x12, 0x13, 0x14, ... |
| * SB700: revisions 0x39, 0x3a, ... |
| * SB800: revisions 0x40, 0x41, ... |
| */ |
| if (rev >= 0x39) |
| return; |
| |
| if (acpi_use_timer_override) |
| return; |
| |
| /* check for IRQ0 interrupt swap */ |
| d = read_pci_config(num, slot, func, 0x64); |
| if (!(d & (1<<14))) |
| acpi_skip_timer_override = 1; |
| |
| if (acpi_skip_timer_override) { |
| printk(KERN_INFO "SB600 revision 0x%x\n", rev); |
| printk(KERN_INFO "Ignoring ACPI timer override.\n"); |
| printk(KERN_INFO "If you got timer trouble " |
| "try acpi_use_timer_override\n"); |
| } |
| } |
| #else |
| static void __init ati_bugs(int num, int slot, int func) |
| { |
| } |
| |
| static void __init ati_bugs_contd(int num, int slot, int func) |
| { |
| } |
| #endif |
| |
| static void __init intel_remapping_check(int num, int slot, int func) |
| { |
| u8 revision; |
| u16 device; |
| |
| device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); |
| revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID); |
| |
| /* |
| * Revision <= 13 of all triggering devices id in this quirk |
| * have a problem draining interrupts when irq remapping is |
| * enabled, and should be flagged as broken. Additionally |
| * revision 0x22 of device id 0x3405 has this problem. |
| */ |
| if (revision <= 0x13) |
| set_irq_remapping_broken(); |
| else if (device == 0x3405 && revision == 0x22) |
| set_irq_remapping_broken(); |
| } |
| |
| /* |
| * Systems with Intel graphics controllers set aside memory exclusively |
| * for gfx driver use. This memory is not marked in the E820 as reserved |
| * or as RAM, and so is subject to overlap from E820 manipulation later |
| * in the boot process. On some systems, MMIO space is allocated on top, |
| * despite the efforts of the "RAM buffer" approach, which simply rounds |
| * memory boundaries up to 64M to try to catch space that may decode |
| * as RAM and so is not suitable for MMIO. |
| */ |
| |
| #define KB(x) ((x) * 1024UL) |
| #define MB(x) (KB (KB (x))) |
| |
| static resource_size_t __init i830_tseg_size(void) |
| { |
| u8 esmramc = read_pci_config_byte(0, 0, 0, I830_ESMRAMC); |
| |
| if (!(esmramc & TSEG_ENABLE)) |
| return 0; |
| |
| if (esmramc & I830_TSEG_SIZE_1M) |
| return MB(1); |
| else |
| return KB(512); |
| } |
| |
| static resource_size_t __init i845_tseg_size(void) |
| { |
| u8 esmramc = read_pci_config_byte(0, 0, 0, I845_ESMRAMC); |
| u8 tseg_size = esmramc & I845_TSEG_SIZE_MASK; |
| |
| if (!(esmramc & TSEG_ENABLE)) |
| return 0; |
| |
| switch (tseg_size) { |
| case I845_TSEG_SIZE_512K: return KB(512); |
| case I845_TSEG_SIZE_1M: return MB(1); |
| default: |
| WARN(1, "Unknown ESMRAMC value: %x!\n", esmramc); |
| } |
| return 0; |
| } |
| |
| static resource_size_t __init i85x_tseg_size(void) |
| { |
| u8 esmramc = read_pci_config_byte(0, 0, 0, I85X_ESMRAMC); |
| |
| if (!(esmramc & TSEG_ENABLE)) |
| return 0; |
| |
| return MB(1); |
| } |
| |
| static resource_size_t __init i830_mem_size(void) |
| { |
| return read_pci_config_byte(0, 0, 0, I830_DRB3) * MB(32); |
| } |
| |
| static resource_size_t __init i85x_mem_size(void) |
| { |
| return read_pci_config_byte(0, 0, 1, I85X_DRB3) * MB(32); |
| } |
| |
| /* |
| * On 830/845/85x the stolen memory base isn't available in any |
| * register. We need to calculate it as TOM-TSEG_SIZE-stolen_size. |
| */ |
| static resource_size_t __init i830_stolen_base(int num, int slot, int func, |
| resource_size_t stolen_size) |
| { |
| return i830_mem_size() - i830_tseg_size() - stolen_size; |
| } |
| |
| static resource_size_t __init i845_stolen_base(int num, int slot, int func, |
| resource_size_t stolen_size) |
| { |
| return i830_mem_size() - i845_tseg_size() - stolen_size; |
| } |
| |
| static resource_size_t __init i85x_stolen_base(int num, int slot, int func, |
| resource_size_t stolen_size) |
| { |
| return i85x_mem_size() - i85x_tseg_size() - stolen_size; |
| } |
| |
| static resource_size_t __init i865_stolen_base(int num, int slot, int func, |
| resource_size_t stolen_size) |
| { |
| u16 toud = 0; |
| |
| toud = read_pci_config_16(0, 0, 0, I865_TOUD); |
| |
| return toud * KB(64) + i845_tseg_size(); |
| } |
| |
| static resource_size_t __init gen3_stolen_base(int num, int slot, int func, |
| resource_size_t stolen_size) |
| { |
| u32 bsm; |
| |
| /* Almost universally we can find the Graphics Base of Stolen Memory |
| * at register BSM (0x5c) in the igfx configuration space. On a few |
| * (desktop) machines this is also mirrored in the bridge device at |
| * different locations, or in the MCHBAR. |
| */ |
| bsm = read_pci_config(num, slot, func, INTEL_BSM); |
| |
| return bsm & INTEL_BSM_MASK; |
| } |
| |
| static resource_size_t __init gen11_stolen_base(int num, int slot, int func, |
| resource_size_t stolen_size) |
| { |
| u64 bsm; |
| |
| bsm = read_pci_config(num, slot, func, INTEL_GEN11_BSM_DW0); |
| bsm &= INTEL_BSM_MASK; |
| bsm |= (u64)read_pci_config(num, slot, func, INTEL_GEN11_BSM_DW1) << 32; |
| |
| return bsm; |
| } |
| |
| static resource_size_t __init i830_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| u16 gms; |
| |
| gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL); |
| gms = gmch_ctrl & I830_GMCH_GMS_MASK; |
| |
| switch (gms) { |
| case I830_GMCH_GMS_STOLEN_512: return KB(512); |
| case I830_GMCH_GMS_STOLEN_1024: return MB(1); |
| case I830_GMCH_GMS_STOLEN_8192: return MB(8); |
| /* local memory isn't part of the normal address space */ |
| case I830_GMCH_GMS_LOCAL: return 0; |
| default: |
| WARN(1, "Unknown GMCH_CTRL value: %x!\n", gmch_ctrl); |
| } |
| |
| return 0; |
| } |
| |
| static resource_size_t __init gen3_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| u16 gms; |
| |
| gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL); |
| gms = gmch_ctrl & I855_GMCH_GMS_MASK; |
| |
| switch (gms) { |
| case I855_GMCH_GMS_STOLEN_1M: return MB(1); |
| case I855_GMCH_GMS_STOLEN_4M: return MB(4); |
| case I855_GMCH_GMS_STOLEN_8M: return MB(8); |
| case I855_GMCH_GMS_STOLEN_16M: return MB(16); |
| case I855_GMCH_GMS_STOLEN_32M: return MB(32); |
| case I915_GMCH_GMS_STOLEN_48M: return MB(48); |
| case I915_GMCH_GMS_STOLEN_64M: return MB(64); |
| case G33_GMCH_GMS_STOLEN_128M: return MB(128); |
| case G33_GMCH_GMS_STOLEN_256M: return MB(256); |
| case INTEL_GMCH_GMS_STOLEN_96M: return MB(96); |
| case INTEL_GMCH_GMS_STOLEN_160M:return MB(160); |
| case INTEL_GMCH_GMS_STOLEN_224M:return MB(224); |
| case INTEL_GMCH_GMS_STOLEN_352M:return MB(352); |
| default: |
| WARN(1, "Unknown GMCH_CTRL value: %x!\n", gmch_ctrl); |
| } |
| |
| return 0; |
| } |
| |
| static resource_size_t __init gen6_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| u16 gms; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gms = (gmch_ctrl >> SNB_GMCH_GMS_SHIFT) & SNB_GMCH_GMS_MASK; |
| |
| return gms * MB(32); |
| } |
| |
| static resource_size_t __init gen8_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| u16 gms; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gms = (gmch_ctrl >> BDW_GMCH_GMS_SHIFT) & BDW_GMCH_GMS_MASK; |
| |
| return gms * MB(32); |
| } |
| |
| static resource_size_t __init chv_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| u16 gms; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gms = (gmch_ctrl >> SNB_GMCH_GMS_SHIFT) & SNB_GMCH_GMS_MASK; |
| |
| /* |
| * 0x0 to 0x10: 32MB increments starting at 0MB |
| * 0x11 to 0x16: 4MB increments starting at 8MB |
| * 0x17 to 0x1d: 4MB increments start at 36MB |
| */ |
| if (gms < 0x11) |
| return gms * MB(32); |
| else if (gms < 0x17) |
| return (gms - 0x11) * MB(4) + MB(8); |
| else |
| return (gms - 0x17) * MB(4) + MB(36); |
| } |
| |
| static resource_size_t __init gen9_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| u16 gms; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gms = (gmch_ctrl >> BDW_GMCH_GMS_SHIFT) & BDW_GMCH_GMS_MASK; |
| |
| /* 0x0 to 0xef: 32MB increments starting at 0MB */ |
| /* 0xf0 to 0xfe: 4MB increments starting at 4MB */ |
| if (gms < 0xf0) |
| return gms * MB(32); |
| else |
| return (gms - 0xf0) * MB(4) + MB(4); |
| } |
| |
| struct intel_early_ops { |
| resource_size_t (*stolen_size)(int num, int slot, int func); |
| resource_size_t (*stolen_base)(int num, int slot, int func, |
| resource_size_t size); |
| }; |
| |
| static const struct intel_early_ops i830_early_ops __initconst = { |
| .stolen_base = i830_stolen_base, |
| .stolen_size = i830_stolen_size, |
| }; |
| |
| static const struct intel_early_ops i845_early_ops __initconst = { |
| .stolen_base = i845_stolen_base, |
| .stolen_size = i830_stolen_size, |
| }; |
| |
| static const struct intel_early_ops i85x_early_ops __initconst = { |
| .stolen_base = i85x_stolen_base, |
| .stolen_size = gen3_stolen_size, |
| }; |
| |
| static const struct intel_early_ops i865_early_ops __initconst = { |
| .stolen_base = i865_stolen_base, |
| .stolen_size = gen3_stolen_size, |
| }; |
| |
| static const struct intel_early_ops gen3_early_ops __initconst = { |
| .stolen_base = gen3_stolen_base, |
| .stolen_size = gen3_stolen_size, |
| }; |
| |
| static const struct intel_early_ops gen6_early_ops __initconst = { |
| .stolen_base = gen3_stolen_base, |
| .stolen_size = gen6_stolen_size, |
| }; |
| |
| static const struct intel_early_ops gen8_early_ops __initconst = { |
| .stolen_base = gen3_stolen_base, |
| .stolen_size = gen8_stolen_size, |
| }; |
| |
| static const struct intel_early_ops gen9_early_ops __initconst = { |
| .stolen_base = gen3_stolen_base, |
| .stolen_size = gen9_stolen_size, |
| }; |
| |
| static const struct intel_early_ops chv_early_ops __initconst = { |
| .stolen_base = gen3_stolen_base, |
| .stolen_size = chv_stolen_size, |
| }; |
| |
| static const struct intel_early_ops gen11_early_ops __initconst = { |
| .stolen_base = gen11_stolen_base, |
| .stolen_size = gen9_stolen_size, |
| }; |
| |
| /* Intel integrated GPUs for which we need to reserve "stolen memory" */ |
| static const struct pci_device_id intel_early_ids[] __initconst = { |
| INTEL_I830_IDS(INTEL_VGA_DEVICE, &i830_early_ops), |
| INTEL_I845G_IDS(INTEL_VGA_DEVICE, &i845_early_ops), |
| INTEL_I85X_IDS(INTEL_VGA_DEVICE, &i85x_early_ops), |
| INTEL_I865G_IDS(INTEL_VGA_DEVICE, &i865_early_ops), |
| INTEL_I915G_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_I915GM_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_I945G_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_I945GM_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_VLV_IDS(INTEL_VGA_DEVICE, &gen6_early_ops), |
| INTEL_PNV_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_I965G_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_G33_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_I965GM_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_GM45_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_G45_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_ILK_IDS(INTEL_VGA_DEVICE, &gen3_early_ops), |
| INTEL_SNB_IDS(INTEL_VGA_DEVICE, &gen6_early_ops), |
| INTEL_IVB_IDS(INTEL_VGA_DEVICE, &gen6_early_ops), |
| INTEL_HSW_IDS(INTEL_VGA_DEVICE, &gen6_early_ops), |
| INTEL_BDW_IDS(INTEL_VGA_DEVICE, &gen8_early_ops), |
| INTEL_CHV_IDS(INTEL_VGA_DEVICE, &chv_early_ops), |
| INTEL_SKL_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_BXT_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_KBL_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_CFL_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_WHL_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_CML_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_GLK_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_CNL_IDS(INTEL_VGA_DEVICE, &gen9_early_ops), |
| INTEL_ICL_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_EHL_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_JSL_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_TGL_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_RKL_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_ADLS_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_ADLP_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_ADLN_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_RPLS_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_RPLU_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| INTEL_RPLP_IDS(INTEL_VGA_DEVICE, &gen11_early_ops), |
| }; |
| |
| struct resource intel_graphics_stolen_res __ro_after_init = DEFINE_RES_MEM(0, 0); |
| EXPORT_SYMBOL(intel_graphics_stolen_res); |
| |
| static void __init |
| intel_graphics_stolen(int num, int slot, int func, |
| const struct intel_early_ops *early_ops) |
| { |
| resource_size_t base, size; |
| resource_size_t end; |
| |
| size = early_ops->stolen_size(num, slot, func); |
| base = early_ops->stolen_base(num, slot, func, size); |
| |
| if (!size || !base) |
| return; |
| |
| end = base + size - 1; |
| |
| intel_graphics_stolen_res.start = base; |
| intel_graphics_stolen_res.end = end; |
| |
| printk(KERN_INFO "Reserving Intel graphics memory at %pR\n", |
| &intel_graphics_stolen_res); |
| |
| /* Mark this space as reserved */ |
| e820__range_add(base, size, E820_TYPE_RESERVED); |
| e820__update_table(e820_table); |
| } |
| |
| static void __init intel_graphics_quirks(int num, int slot, int func) |
| { |
| const struct intel_early_ops *early_ops; |
| u16 device; |
| int i; |
| |
| /* |
| * Reserve "stolen memory" for an integrated GPU. If we've already |
| * found one, there's nothing to do for other (discrete) GPUs. |
| */ |
| if (resource_size(&intel_graphics_stolen_res)) |
| return; |
| |
| device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); |
| |
| for (i = 0; i < ARRAY_SIZE(intel_early_ids); i++) { |
| kernel_ulong_t driver_data = intel_early_ids[i].driver_data; |
| |
| if (intel_early_ids[i].device != device) |
| continue; |
| |
| early_ops = (typeof(early_ops))driver_data; |
| |
| intel_graphics_stolen(num, slot, func, early_ops); |
| |
| return; |
| } |
| } |
| |
| static void __init force_disable_hpet(int num, int slot, int func) |
| { |
| #ifdef CONFIG_HPET_TIMER |
| boot_hpet_disable = true; |
| pr_info("x86/hpet: Will disable the HPET for this platform because it's not reliable\n"); |
| #endif |
| } |
| |
| #define BCM4331_MMIO_SIZE 16384 |
| #define BCM4331_PM_CAP 0x40 |
| #define bcma_aread32(reg) ioread32(mmio + 1 * BCMA_CORE_SIZE + reg) |
| #define bcma_awrite32(reg, val) iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg) |
| |
| static void __init apple_airport_reset(int bus, int slot, int func) |
| { |
| void __iomem *mmio; |
| u16 pmcsr; |
| u64 addr; |
| int i; |
| |
| if (!x86_apple_machine) |
| return; |
| |
| /* Card may have been put into PCI_D3hot by grub quirk */ |
| pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL); |
| |
| if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) { |
| pmcsr &= ~PCI_PM_CTRL_STATE_MASK; |
| write_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL, pmcsr); |
| mdelay(10); |
| |
| pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL); |
| if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) { |
| pr_err("pci 0000:%02x:%02x.%d: Cannot power up Apple AirPort card\n", |
| bus, slot, func); |
| return; |
| } |
| } |
| |
| addr = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); |
| addr |= (u64)read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_1) << 32; |
| addr &= PCI_BASE_ADDRESS_MEM_MASK; |
| |
| mmio = early_ioremap(addr, BCM4331_MMIO_SIZE); |
| if (!mmio) { |
| pr_err("pci 0000:%02x:%02x.%d: Cannot iomap Apple AirPort card\n", |
| bus, slot, func); |
| return; |
| } |
| |
| pr_info("Resetting Apple AirPort card (left enabled by EFI)\n"); |
| |
| for (i = 0; bcma_aread32(BCMA_RESET_ST) && i < 30; i++) |
| udelay(10); |
| |
| bcma_awrite32(BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); |
| bcma_aread32(BCMA_RESET_CTL); |
| udelay(1); |
| |
| bcma_awrite32(BCMA_RESET_CTL, 0); |
| bcma_aread32(BCMA_RESET_CTL); |
| udelay(10); |
| |
| early_iounmap(mmio, BCM4331_MMIO_SIZE); |
| } |
| |
| #define QFLAG_APPLY_ONCE 0x1 |
| #define QFLAG_APPLIED 0x2 |
| #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) |
| struct chipset { |
| u32 vendor; |
| u32 device; |
| u32 class; |
| u32 class_mask; |
| u32 flags; |
| void (*f)(int num, int slot, int func); |
| }; |
| |
| static struct chipset early_qrk[] __initdata = { |
| { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, |
| { PCI_VENDOR_ID_VIA, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, |
| PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, |
| { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, |
| PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, |
| { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, |
| PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd }, |
| { PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST, |
| PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check }, |
| { PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST, |
| PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check }, |
| { PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST, |
| PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check }, |
| { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID, |
| 0, intel_graphics_quirks }, |
| /* |
| * HPET on the current version of the Baytrail platform has accuracy |
| * problems: it will halt in deep idle state - so we disable it. |
| * |
| * More details can be found in section 18.10.1.3 of the datasheet: |
| * |
| * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf |
| */ |
| { PCI_VENDOR_ID_INTEL, 0x0f00, |
| PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, |
| { PCI_VENDOR_ID_BROADCOM, 0x4331, |
| PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset}, |
| {} |
| }; |
| |
| static void __init early_pci_scan_bus(int bus); |
| |
| /** |
| * check_dev_quirk - apply early quirks to a given PCI device |
| * @num: bus number |
| * @slot: slot number |
| * @func: PCI function |
| * |
| * Check the vendor & device ID against the early quirks table. |
| * |
| * If the device is single function, let early_pci_scan_bus() know so we don't |
| * poke at this device again. |
| */ |
| static int __init check_dev_quirk(int num, int slot, int func) |
| { |
| u16 class; |
| u16 vendor; |
| u16 device; |
| u8 type; |
| u8 sec; |
| int i; |
| |
| class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); |
| |
| if (class == 0xffff) |
| return -1; /* no class, treat as single function */ |
| |
| vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID); |
| |
| device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); |
| |
| for (i = 0; early_qrk[i].f != NULL; i++) { |
| if (((early_qrk[i].vendor == PCI_ANY_ID) || |
| (early_qrk[i].vendor == vendor)) && |
| ((early_qrk[i].device == PCI_ANY_ID) || |
| (early_qrk[i].device == device)) && |
| (!((early_qrk[i].class ^ class) & |
| early_qrk[i].class_mask))) { |
| if ((early_qrk[i].flags & |
| QFLAG_DONE) != QFLAG_DONE) |
| early_qrk[i].f(num, slot, func); |
| early_qrk[i].flags |= QFLAG_APPLIED; |
| } |
| } |
| |
| type = read_pci_config_byte(num, slot, func, |
| PCI_HEADER_TYPE); |
| |
| if ((type & PCI_HEADER_TYPE_MASK) == PCI_HEADER_TYPE_BRIDGE) { |
| sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS); |
| if (sec > num) |
| early_pci_scan_bus(sec); |
| } |
| |
| if (!(type & PCI_HEADER_TYPE_MFD)) |
| return -1; |
| |
| return 0; |
| } |
| |
| static void __init early_pci_scan_bus(int bus) |
| { |
| int slot, func; |
| |
| /* Poor man's PCI discovery */ |
| for (slot = 0; slot < 32; slot++) |
| for (func = 0; func < 8; func++) { |
| /* Only probe function 0 on single fn devices */ |
| if (check_dev_quirk(bus, slot, func)) |
| break; |
| } |
| } |
| |
| void __init early_quirks(void) |
| { |
| if (!early_pci_allowed()) |
| return; |
| |
| early_pci_scan_bus(0); |
| } |