| /* |
| * MKISS Driver |
| * |
| * This module: |
| * This module is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * This module implements the AX.25 protocol for kernel-based |
| * devices like TTYs. It interfaces between a raw TTY, and the |
| * kernel's AX.25 protocol layers, just like slip.c. |
| * AX.25 needs to be separated from slip.c while slip.c is no |
| * longer a static kernel device since it is a module. |
| * This method clears the way to implement other kiss protocols |
| * like mkiss smack g8bpq ..... so far only mkiss is implemented. |
| * |
| * Hans Alblas <hans@esrac.ele.tue.nl> |
| * |
| * History |
| * Jonathan (G4KLX) Fixed to match Linux networking changes - 2.1.15. |
| * Matthias (DG2FEF) Added support for FlexNet CRC (on special request) |
| * Fixed bug in ax25_close(): dev_lock_wait() was |
| * called twice, causing a deadlock. |
| * Jeroen (PE1RXQ) Removed old MKISS_MAGIC stuff and calls to |
| * MOD_*_USE_COUNT |
| * Remove cli() and fix rtnl lock usage. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <asm/system.h> |
| #include <linux/bitops.h> |
| #include <asm/uaccess.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/in.h> |
| #include <linux/inet.h> |
| #include <linux/tty.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/major.h> |
| #include <linux/init.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| |
| #include <net/ax25.h> |
| |
| #include "mkiss.h" |
| |
| #ifdef CONFIG_INET |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #endif |
| |
| static char banner[] __initdata = KERN_INFO "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n"; |
| |
| typedef struct ax25_ctrl { |
| struct ax_disp ctrl; /* */ |
| struct net_device dev; /* the device */ |
| } ax25_ctrl_t; |
| |
| static ax25_ctrl_t **ax25_ctrls; |
| |
| int ax25_maxdev = AX25_MAXDEV; /* Can be overridden with insmod! */ |
| |
| static struct tty_ldisc ax_ldisc; |
| |
| static int ax25_init(struct net_device *); |
| static int kiss_esc(unsigned char *, unsigned char *, int); |
| static int kiss_esc_crc(unsigned char *, unsigned char *, unsigned short, int); |
| static void kiss_unesc(struct ax_disp *, unsigned char); |
| |
| /*---------------------------------------------------------------------------*/ |
| |
| static const unsigned short Crc_flex_table[] = { |
| 0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38, |
| 0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770, |
| 0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9, |
| 0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1, |
| 0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a, |
| 0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672, |
| 0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb, |
| 0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3, |
| 0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c, |
| 0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574, |
| 0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd, |
| 0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5, |
| 0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e, |
| 0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476, |
| 0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf, |
| 0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7, |
| 0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30, |
| 0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378, |
| 0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1, |
| 0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9, |
| 0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32, |
| 0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a, |
| 0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3, |
| 0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb, |
| 0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34, |
| 0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c, |
| 0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5, |
| 0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd, |
| 0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36, |
| 0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e, |
| 0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7, |
| 0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff |
| }; |
| |
| /*---------------------------------------------------------------------------*/ |
| |
| static unsigned short calc_crc_flex(unsigned char *cp, int size) |
| { |
| unsigned short crc = 0xffff; |
| |
| while (size--) |
| crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; |
| |
| return crc; |
| } |
| |
| /*---------------------------------------------------------------------------*/ |
| |
| static int check_crc_flex(unsigned char *cp, int size) |
| { |
| unsigned short crc = 0xffff; |
| |
| if (size < 3) |
| return -1; |
| |
| while (size--) |
| crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff]; |
| |
| if ((crc & 0xffff) != 0x7070) |
| return -1; |
| |
| return 0; |
| } |
| |
| /*---------------------------------------------------------------------------*/ |
| |
| /* Find a free channel, and link in this `tty' line. */ |
| static inline struct ax_disp *ax_alloc(void) |
| { |
| ax25_ctrl_t *axp=NULL; |
| int i; |
| |
| for (i = 0; i < ax25_maxdev; i++) { |
| axp = ax25_ctrls[i]; |
| |
| /* Not allocated ? */ |
| if (axp == NULL) |
| break; |
| |
| /* Not in use ? */ |
| if (!test_and_set_bit(AXF_INUSE, &axp->ctrl.flags)) |
| break; |
| } |
| |
| /* Sorry, too many, all slots in use */ |
| if (i >= ax25_maxdev) |
| return NULL; |
| |
| /* If no channels are available, allocate one */ |
| if (axp == NULL && (ax25_ctrls[i] = kmalloc(sizeof(ax25_ctrl_t), GFP_KERNEL)) != NULL) { |
| axp = ax25_ctrls[i]; |
| } |
| memset(axp, 0, sizeof(ax25_ctrl_t)); |
| |
| /* Initialize channel control data */ |
| set_bit(AXF_INUSE, &axp->ctrl.flags); |
| sprintf(axp->dev.name, "ax%d", i++); |
| axp->ctrl.tty = NULL; |
| axp->dev.base_addr = i; |
| axp->dev.priv = (void *)&axp->ctrl; |
| axp->dev.next = NULL; |
| axp->dev.init = ax25_init; |
| |
| if (axp != NULL) { |
| /* |
| * register device so that it can be ifconfig'ed |
| * ax25_init() will be called as a side-effect |
| * SIDE-EFFECT WARNING: ax25_init() CLEARS axp->ctrl ! |
| */ |
| if (register_netdev(&axp->dev) == 0) { |
| /* (Re-)Set the INUSE bit. Very Important! */ |
| set_bit(AXF_INUSE, &axp->ctrl.flags); |
| axp->ctrl.dev = &axp->dev; |
| axp->dev.priv = (void *) &axp->ctrl; |
| |
| return &axp->ctrl; |
| } else { |
| clear_bit(AXF_INUSE,&axp->ctrl.flags); |
| printk(KERN_ERR "mkiss: ax_alloc() - register_netdev() failure.\n"); |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* Free an AX25 channel. */ |
| static inline void ax_free(struct ax_disp *ax) |
| { |
| /* Free all AX25 frame buffers. */ |
| if (ax->rbuff) |
| kfree(ax->rbuff); |
| ax->rbuff = NULL; |
| if (ax->xbuff) |
| kfree(ax->xbuff); |
| ax->xbuff = NULL; |
| if (!test_and_clear_bit(AXF_INUSE, &ax->flags)) |
| printk(KERN_ERR "mkiss: %s: ax_free for already free unit.\n", ax->dev->name); |
| } |
| |
| static void ax_changedmtu(struct ax_disp *ax) |
| { |
| struct net_device *dev = ax->dev; |
| unsigned char *xbuff, *rbuff, *oxbuff, *orbuff; |
| int len; |
| |
| len = dev->mtu * 2; |
| |
| /* |
| * allow for arrival of larger UDP packets, even if we say not to |
| * also fixes a bug in which SunOS sends 512-byte packets even with |
| * an MSS of 128 |
| */ |
| if (len < 576 * 2) |
| len = 576 * 2; |
| |
| xbuff = kmalloc(len + 4, GFP_ATOMIC); |
| rbuff = kmalloc(len + 4, GFP_ATOMIC); |
| |
| if (xbuff == NULL || rbuff == NULL) { |
| printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, MTU change cancelled.\n", |
| ax->dev->name); |
| dev->mtu = ax->mtu; |
| if (xbuff != NULL) |
| kfree(xbuff); |
| if (rbuff != NULL) |
| kfree(rbuff); |
| return; |
| } |
| |
| spin_lock_bh(&ax->buflock); |
| |
| oxbuff = ax->xbuff; |
| ax->xbuff = xbuff; |
| orbuff = ax->rbuff; |
| ax->rbuff = rbuff; |
| |
| if (ax->xleft) { |
| if (ax->xleft <= len) { |
| memcpy(ax->xbuff, ax->xhead, ax->xleft); |
| } else { |
| ax->xleft = 0; |
| ax->tx_dropped++; |
| } |
| } |
| |
| ax->xhead = ax->xbuff; |
| |
| if (ax->rcount) { |
| if (ax->rcount <= len) { |
| memcpy(ax->rbuff, orbuff, ax->rcount); |
| } else { |
| ax->rcount = 0; |
| ax->rx_over_errors++; |
| set_bit(AXF_ERROR, &ax->flags); |
| } |
| } |
| |
| ax->mtu = dev->mtu + 73; |
| ax->buffsize = len; |
| |
| spin_unlock_bh(&ax->buflock); |
| |
| if (oxbuff != NULL) |
| kfree(oxbuff); |
| if (orbuff != NULL) |
| kfree(orbuff); |
| } |
| |
| |
| /* Set the "sending" flag. This must be atomic. */ |
| static inline void ax_lock(struct ax_disp *ax) |
| { |
| netif_stop_queue(ax->dev); |
| } |
| |
| |
| /* Clear the "sending" flag. This must be atomic. */ |
| static inline void ax_unlock(struct ax_disp *ax) |
| { |
| netif_start_queue(ax->dev); |
| } |
| |
| /* Send one completely decapsulated AX.25 packet to the AX.25 layer. */ |
| static void ax_bump(struct ax_disp *ax) |
| { |
| struct sk_buff *skb; |
| int count; |
| |
| spin_lock_bh(&ax->buflock); |
| if (ax->rbuff[0] > 0x0f) { |
| if (ax->rbuff[0] & 0x20) { |
| ax->crcmode = CRC_MODE_FLEX; |
| if (check_crc_flex(ax->rbuff, ax->rcount) < 0) { |
| ax->rx_errors++; |
| return; |
| } |
| ax->rcount -= 2; |
| /* dl9sau bugfix: the trailling two bytes flexnet crc |
| * will not be passed to the kernel. thus we have |
| * to correct the kissparm signature, because it |
| * indicates a crc but there's none |
| */ |
| *ax->rbuff &= ~0x20; |
| } |
| } |
| spin_unlock_bh(&ax->buflock); |
| |
| count = ax->rcount; |
| |
| if ((skb = dev_alloc_skb(count)) == NULL) { |
| printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name); |
| ax->rx_dropped++; |
| return; |
| } |
| |
| spin_lock_bh(&ax->buflock); |
| memcpy(skb_put(skb,count), ax->rbuff, count); |
| spin_unlock_bh(&ax->buflock); |
| skb->protocol = ax25_type_trans(skb, ax->dev); |
| netif_rx(skb); |
| ax->dev->last_rx = jiffies; |
| ax->rx_packets++; |
| ax->rx_bytes+=count; |
| } |
| |
| /* Encapsulate one AX.25 packet and stuff into a TTY queue. */ |
| static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len) |
| { |
| unsigned char *p; |
| int actual, count; |
| |
| if (ax->mtu != ax->dev->mtu + 73) /* Someone has been ifconfigging */ |
| ax_changedmtu(ax); |
| |
| if (len > ax->mtu) { /* Sigh, shouldn't occur BUT ... */ |
| len = ax->mtu; |
| printk(KERN_ERR "mkiss: %s: truncating oversized transmit packet!\n", ax->dev->name); |
| ax->tx_dropped++; |
| ax_unlock(ax); |
| return; |
| } |
| |
| p = icp; |
| |
| spin_lock_bh(&ax->buflock); |
| switch (ax->crcmode) { |
| unsigned short crc; |
| |
| case CRC_MODE_FLEX: |
| *p |= 0x20; |
| crc = calc_crc_flex(p, len); |
| count = kiss_esc_crc(p, (unsigned char *)ax->xbuff, crc, len+2); |
| break; |
| |
| default: |
| count = kiss_esc(p, (unsigned char *)ax->xbuff, len); |
| break; |
| } |
| |
| ax->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); |
| actual = ax->tty->driver->write(ax->tty, ax->xbuff, count); |
| ax->tx_packets++; |
| ax->tx_bytes+=actual; |
| ax->dev->trans_start = jiffies; |
| ax->xleft = count - actual; |
| ax->xhead = ax->xbuff + actual; |
| |
| spin_unlock_bh(&ax->buflock); |
| } |
| |
| /* |
| * Called by the driver when there's room for more data. If we have |
| * more packets to send, we send them here. |
| */ |
| static void ax25_write_wakeup(struct tty_struct *tty) |
| { |
| int actual; |
| struct ax_disp *ax = (struct ax_disp *) tty->disc_data; |
| |
| /* First make sure we're connected. */ |
| if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev)) |
| return; |
| if (ax->xleft <= 0) { |
| /* Now serial buffer is almost free & we can start |
| * transmission of another packet |
| */ |
| tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); |
| |
| netif_wake_queue(ax->dev); |
| return; |
| } |
| |
| actual = tty->driver->write(tty, ax->xhead, ax->xleft); |
| ax->xleft -= actual; |
| ax->xhead += actual; |
| } |
| |
| /* Encapsulate an AX.25 packet and kick it into a TTY queue. */ |
| static int ax_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct ax_disp *ax = netdev_priv(dev); |
| |
| if (!netif_running(dev)) { |
| printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name); |
| return 1; |
| } |
| |
| if (netif_queue_stopped(dev)) { |
| /* |
| * May be we must check transmitter timeout here ? |
| * 14 Oct 1994 Dmitry Gorodchanin. |
| */ |
| if (jiffies - dev->trans_start < 20 * HZ) { |
| /* 20 sec timeout not reached */ |
| return 1; |
| } |
| |
| printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name, |
| (ax->tty->driver->chars_in_buffer(ax->tty) || ax->xleft) ? |
| "bad line quality" : "driver error"); |
| |
| ax->xleft = 0; |
| ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); |
| ax_unlock(ax); |
| } |
| |
| /* We were not busy, so we are now... :-) */ |
| if (skb != NULL) { |
| ax_lock(ax); |
| ax_encaps(ax, skb->data, skb->len); |
| kfree_skb(skb); |
| } |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE) |
| |
| /* Return the frame type ID */ |
| static int ax_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, |
| void *daddr, void *saddr, unsigned len) |
| { |
| #ifdef CONFIG_INET |
| if (type != htons(ETH_P_AX25)) |
| return ax25_encapsulate(skb, dev, type, daddr, saddr, len); |
| #endif |
| return 0; |
| } |
| |
| |
| static int ax_rebuild_header(struct sk_buff *skb) |
| { |
| #ifdef CONFIG_INET |
| return ax25_rebuild_header(skb); |
| #else |
| return 0; |
| #endif |
| } |
| |
| #endif /* CONFIG_{AX25,AX25_MODULE} */ |
| |
| /* Open the low-level part of the AX25 channel. Easy! */ |
| static int ax_open(struct net_device *dev) |
| { |
| struct ax_disp *ax = netdev_priv(dev); |
| unsigned long len; |
| |
| if (ax->tty == NULL) |
| return -ENODEV; |
| |
| /* |
| * Allocate the frame buffers: |
| * |
| * rbuff Receive buffer. |
| * xbuff Transmit buffer. |
| */ |
| len = dev->mtu * 2; |
| |
| /* |
| * allow for arrival of larger UDP packets, even if we say not to |
| * also fixes a bug in which SunOS sends 512-byte packets even with |
| * an MSS of 128 |
| */ |
| if (len < 576 * 2) |
| len = 576 * 2; |
| |
| if ((ax->rbuff = kmalloc(len + 4, GFP_KERNEL)) == NULL) |
| goto norbuff; |
| |
| if ((ax->xbuff = kmalloc(len + 4, GFP_KERNEL)) == NULL) |
| goto noxbuff; |
| |
| ax->mtu = dev->mtu + 73; |
| ax->buffsize = len; |
| ax->rcount = 0; |
| ax->xleft = 0; |
| |
| ax->flags &= (1 << AXF_INUSE); /* Clear ESCAPE & ERROR flags */ |
| |
| spin_lock_init(&ax->buflock); |
| |
| netif_start_queue(dev); |
| return 0; |
| |
| noxbuff: |
| kfree(ax->rbuff); |
| |
| norbuff: |
| return -ENOMEM; |
| } |
| |
| |
| /* Close the low-level part of the AX25 channel. Easy! */ |
| static int ax_close(struct net_device *dev) |
| { |
| struct ax_disp *ax = netdev_priv(dev); |
| |
| if (ax->tty == NULL) |
| return -EBUSY; |
| |
| ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); |
| |
| netif_stop_queue(dev); |
| |
| return 0; |
| } |
| |
| static int ax25_receive_room(struct tty_struct *tty) |
| { |
| return 65536; /* We can handle an infinite amount of data. :-) */ |
| } |
| |
| /* |
| * Handle the 'receiver data ready' interrupt. |
| * This function is called by the 'tty_io' module in the kernel when |
| * a block of data has been received, which can now be decapsulated |
| * and sent on to the AX.25 layer for further processing. |
| */ |
| static void ax25_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) |
| { |
| struct ax_disp *ax = (struct ax_disp *) tty->disc_data; |
| |
| if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev)) |
| return; |
| |
| /* |
| * Argh! mtu change time! - costs us the packet part received |
| * at the change |
| */ |
| if (ax->mtu != ax->dev->mtu + 73) |
| ax_changedmtu(ax); |
| |
| /* Read the characters out of the buffer */ |
| while (count--) { |
| if (fp != NULL && *fp++) { |
| if (!test_and_set_bit(AXF_ERROR, &ax->flags)) |
| ax->rx_errors++; |
| cp++; |
| continue; |
| } |
| |
| kiss_unesc(ax, *cp++); |
| } |
| } |
| |
| static int ax25_open(struct tty_struct *tty) |
| { |
| struct ax_disp *ax = (struct ax_disp *) tty->disc_data; |
| int err; |
| |
| /* First make sure we're not already connected. */ |
| if (ax && ax->magic == AX25_MAGIC) |
| return -EEXIST; |
| |
| /* OK. Find a free AX25 channel to use. */ |
| if ((ax = ax_alloc()) == NULL) |
| return -ENFILE; |
| |
| ax->tty = tty; |
| tty->disc_data = ax; |
| |
| if (tty->driver->flush_buffer) |
| tty->driver->flush_buffer(tty); |
| |
| /* Restore default settings */ |
| ax->dev->type = ARPHRD_AX25; |
| |
| /* Perform the low-level AX25 initialization. */ |
| if ((err = ax_open(ax->dev))) |
| return err; |
| |
| /* Done. We have linked the TTY line to a channel. */ |
| return ax->dev->base_addr; |
| } |
| |
| static void ax25_close(struct tty_struct *tty) |
| { |
| struct ax_disp *ax = (struct ax_disp *) tty->disc_data; |
| |
| /* First make sure we're connected. */ |
| if (ax == NULL || ax->magic != AX25_MAGIC) |
| return; |
| |
| unregister_netdev(ax->dev); |
| |
| tty->disc_data = NULL; |
| ax->tty = NULL; |
| |
| ax_free(ax); |
| } |
| |
| |
| static struct net_device_stats *ax_get_stats(struct net_device *dev) |
| { |
| static struct net_device_stats stats; |
| struct ax_disp *ax = netdev_priv(dev); |
| |
| memset(&stats, 0, sizeof(struct net_device_stats)); |
| |
| stats.rx_packets = ax->rx_packets; |
| stats.tx_packets = ax->tx_packets; |
| stats.rx_bytes = ax->rx_bytes; |
| stats.tx_bytes = ax->tx_bytes; |
| stats.rx_dropped = ax->rx_dropped; |
| stats.tx_dropped = ax->tx_dropped; |
| stats.tx_errors = ax->tx_errors; |
| stats.rx_errors = ax->rx_errors; |
| stats.rx_over_errors = ax->rx_over_errors; |
| |
| return &stats; |
| } |
| |
| |
| /************************************************************************ |
| * STANDARD ENCAPSULATION * |
| ************************************************************************/ |
| |
| static int kiss_esc(unsigned char *s, unsigned char *d, int len) |
| { |
| unsigned char *ptr = d; |
| unsigned char c; |
| |
| /* |
| * Send an initial END character to flush out any |
| * data that may have accumulated in the receiver |
| * due to line noise. |
| */ |
| |
| *ptr++ = END; |
| |
| while (len-- > 0) { |
| switch (c = *s++) { |
| case END: |
| *ptr++ = ESC; |
| *ptr++ = ESC_END; |
| break; |
| case ESC: |
| *ptr++ = ESC; |
| *ptr++ = ESC_ESC; |
| break; |
| default: |
| *ptr++ = c; |
| break; |
| } |
| } |
| |
| *ptr++ = END; |
| |
| return ptr - d; |
| } |
| |
| /* |
| * MW: |
| * OK its ugly, but tell me a better solution without copying the |
| * packet to a temporary buffer :-) |
| */ |
| static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, int len) |
| { |
| unsigned char *ptr = d; |
| unsigned char c=0; |
| |
| *ptr++ = END; |
| while (len > 0) { |
| if (len > 2) |
| c = *s++; |
| else if (len > 1) |
| c = crc >> 8; |
| else if (len > 0) |
| c = crc & 0xff; |
| |
| len--; |
| |
| switch (c) { |
| case END: |
| *ptr++ = ESC; |
| *ptr++ = ESC_END; |
| break; |
| case ESC: |
| *ptr++ = ESC; |
| *ptr++ = ESC_ESC; |
| break; |
| default: |
| *ptr++ = c; |
| break; |
| } |
| } |
| *ptr++ = END; |
| return ptr - d; |
| } |
| |
| static void kiss_unesc(struct ax_disp *ax, unsigned char s) |
| { |
| switch (s) { |
| case END: |
| /* drop keeptest bit = VSV */ |
| if (test_bit(AXF_KEEPTEST, &ax->flags)) |
| clear_bit(AXF_KEEPTEST, &ax->flags); |
| |
| if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2)) |
| ax_bump(ax); |
| |
| clear_bit(AXF_ESCAPE, &ax->flags); |
| ax->rcount = 0; |
| return; |
| |
| case ESC: |
| set_bit(AXF_ESCAPE, &ax->flags); |
| return; |
| case ESC_ESC: |
| if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) |
| s = ESC; |
| break; |
| case ESC_END: |
| if (test_and_clear_bit(AXF_ESCAPE, &ax->flags)) |
| s = END; |
| break; |
| } |
| |
| spin_lock_bh(&ax->buflock); |
| if (!test_bit(AXF_ERROR, &ax->flags)) { |
| if (ax->rcount < ax->buffsize) { |
| ax->rbuff[ax->rcount++] = s; |
| spin_unlock_bh(&ax->buflock); |
| return; |
| } |
| |
| ax->rx_over_errors++; |
| set_bit(AXF_ERROR, &ax->flags); |
| } |
| spin_unlock_bh(&ax->buflock); |
| } |
| |
| |
| static int ax_set_mac_address(struct net_device *dev, void __user *addr) |
| { |
| if (copy_from_user(dev->dev_addr, addr, AX25_ADDR_LEN)) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int ax_set_dev_mac_address(struct net_device *dev, void *addr) |
| { |
| struct sockaddr *sa = addr; |
| |
| memcpy(dev->dev_addr, sa->sa_data, AX25_ADDR_LEN); |
| |
| return 0; |
| } |
| |
| |
| /* Perform I/O control on an active ax25 channel. */ |
| static int ax25_disp_ioctl(struct tty_struct *tty, void *file, int cmd, void __user *arg) |
| { |
| struct ax_disp *ax = (struct ax_disp *) tty->disc_data; |
| unsigned int tmp; |
| |
| /* First make sure we're connected. */ |
| if (ax == NULL || ax->magic != AX25_MAGIC) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case SIOCGIFNAME: |
| if (copy_to_user(arg, ax->dev->name, strlen(ax->dev->name) + 1)) |
| return -EFAULT; |
| return 0; |
| |
| case SIOCGIFENCAP: |
| return put_user(4, (int __user *)arg); |
| |
| case SIOCSIFENCAP: |
| if (get_user(tmp, (int __user *)arg)) |
| return -EFAULT; |
| ax->mode = tmp; |
| ax->dev->addr_len = AX25_ADDR_LEN; /* sizeof an AX.25 addr */ |
| ax->dev->hard_header_len = AX25_KISS_HEADER_LEN + AX25_MAX_HEADER_LEN + 3; |
| ax->dev->type = ARPHRD_AX25; |
| return 0; |
| |
| case SIOCSIFHWADDR: |
| return ax_set_mac_address(ax->dev, arg); |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| static int ax_open_dev(struct net_device *dev) |
| { |
| struct ax_disp *ax = netdev_priv(dev); |
| |
| if (ax->tty == NULL) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| |
| /* Initialize the driver. Called by network startup. */ |
| static int ax25_init(struct net_device *dev) |
| { |
| struct ax_disp *ax = netdev_priv(dev); |
| |
| static char ax25_bcast[AX25_ADDR_LEN] = |
| {'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1}; |
| static char ax25_test[AX25_ADDR_LEN] = |
| {'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1}; |
| |
| if (ax == NULL) /* Allocation failed ?? */ |
| return -ENODEV; |
| |
| /* Set up the "AX25 Control Block". (And clear statistics) */ |
| memset(ax, 0, sizeof (struct ax_disp)); |
| ax->magic = AX25_MAGIC; |
| ax->dev = dev; |
| |
| /* Finish setting up the DEVICE info. */ |
| dev->mtu = AX_MTU; |
| dev->hard_start_xmit = ax_xmit; |
| dev->open = ax_open_dev; |
| dev->stop = ax_close; |
| dev->get_stats = ax_get_stats; |
| dev->set_mac_address = ax_set_dev_mac_address; |
| dev->hard_header_len = 0; |
| dev->addr_len = 0; |
| dev->type = ARPHRD_AX25; |
| dev->tx_queue_len = 10; |
| dev->hard_header = ax_header; |
| dev->rebuild_header = ax_rebuild_header; |
| |
| memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN); |
| memcpy(dev->dev_addr, ax25_test, AX25_ADDR_LEN); |
| |
| /* New-style flags. */ |
| dev->flags = IFF_BROADCAST | IFF_MULTICAST; |
| |
| return 0; |
| } |
| |
| |
| /* ******************************************************************** */ |
| /* * Init MKISS driver * */ |
| /* ******************************************************************** */ |
| |
| static int __init mkiss_init_driver(void) |
| { |
| int status; |
| |
| printk(banner); |
| |
| if (ax25_maxdev < 4) |
| ax25_maxdev = 4; /* Sanity */ |
| |
| if ((ax25_ctrls = kmalloc(sizeof(void *) * ax25_maxdev, GFP_KERNEL)) == NULL) { |
| printk(KERN_ERR "mkiss: Can't allocate ax25_ctrls[] array!\n"); |
| return -ENOMEM; |
| } |
| |
| /* Clear the pointer array, we allocate devices when we need them */ |
| memset(ax25_ctrls, 0, sizeof(void*) * ax25_maxdev); /* Pointers */ |
| |
| /* Fill in our line protocol discipline, and register it */ |
| ax_ldisc.magic = TTY_LDISC_MAGIC; |
| ax_ldisc.name = "mkiss"; |
| ax_ldisc.open = ax25_open; |
| ax_ldisc.close = ax25_close; |
| ax_ldisc.ioctl = (int (*)(struct tty_struct *, struct file *, |
| unsigned int, unsigned long))ax25_disp_ioctl; |
| ax_ldisc.receive_buf = ax25_receive_buf; |
| ax_ldisc.receive_room = ax25_receive_room; |
| ax_ldisc.write_wakeup = ax25_write_wakeup; |
| |
| if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0) { |
| printk(KERN_ERR "mkiss: can't register line discipline (err = %d)\n", status); |
| kfree(ax25_ctrls); |
| } |
| return status; |
| } |
| |
| static void __exit mkiss_exit_driver(void) |
| { |
| int i; |
| |
| for (i = 0; i < ax25_maxdev; i++) { |
| if (ax25_ctrls[i]) { |
| /* |
| * VSV = if dev->start==0, then device |
| * unregistered while close proc. |
| */ |
| if (netif_running(&ax25_ctrls[i]->dev)) |
| unregister_netdev(&ax25_ctrls[i]->dev); |
| kfree(ax25_ctrls[i]); |
| } |
| } |
| |
| kfree(ax25_ctrls); |
| ax25_ctrls = NULL; |
| |
| if ((i = tty_register_ldisc(N_AX25, NULL))) |
| printk(KERN_ERR "mkiss: can't unregister line discipline (err = %d)\n", i); |
| } |
| |
| MODULE_AUTHOR("Hans Albas PE1AYX <hans@esrac.ele.tue.nl>"); |
| MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs"); |
| MODULE_PARM(ax25_maxdev, "i"); |
| MODULE_PARM_DESC(ax25_maxdev, "number of MKISS devices"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_LDISC(N_AX25); |
| module_init(mkiss_init_driver); |
| module_exit(mkiss_exit_driver); |
| |