| /* |
| * Copyright 2016 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| #include "dce110/dce110_hw_sequencer.h" |
| #include "dcn10/dcn10_hw_sequencer.h" |
| #include "dcn20/dcn20_hwseq.h" |
| #include "dcn21/dcn21_hwseq.h" |
| #include "dcn30/dcn30_hwseq.h" |
| #include "dcn301/dcn301_hwseq.h" |
| #include "dcn31/dcn31_hwseq.h" |
| |
| static const struct hw_sequencer_funcs dcn31_funcs = { |
| .program_gamut_remap = dcn10_program_gamut_remap, |
| .init_hw = dcn31_init_hw, |
| .power_down_on_boot = dcn10_power_down_on_boot, |
| .apply_ctx_to_hw = dce110_apply_ctx_to_hw, |
| .apply_ctx_for_surface = NULL, |
| .program_front_end_for_ctx = dcn20_program_front_end_for_ctx, |
| .wait_for_pending_cleared = dcn10_wait_for_pending_cleared, |
| .post_unlock_program_front_end = dcn20_post_unlock_program_front_end, |
| .update_plane_addr = dcn20_update_plane_addr, |
| .update_dchub = dcn10_update_dchub, |
| .update_pending_status = dcn10_update_pending_status, |
| .program_output_csc = dcn20_program_output_csc, |
| .enable_accelerated_mode = dce110_enable_accelerated_mode, |
| .enable_timing_synchronization = dcn10_enable_timing_synchronization, |
| .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset, |
| .update_info_frame = dcn31_update_info_frame, |
| .send_immediate_sdp_message = dcn10_send_immediate_sdp_message, |
| .enable_stream = dcn20_enable_stream, |
| .disable_stream = dce110_disable_stream, |
| .unblank_stream = dcn20_unblank_stream, |
| .blank_stream = dce110_blank_stream, |
| .enable_audio_stream = dce110_enable_audio_stream, |
| .disable_audio_stream = dce110_disable_audio_stream, |
| .disable_plane = dcn20_disable_plane, |
| .pipe_control_lock = dcn20_pipe_control_lock, |
| .interdependent_update_lock = dcn10_lock_all_pipes, |
| .cursor_lock = dcn10_cursor_lock, |
| .prepare_bandwidth = dcn20_prepare_bandwidth, |
| .optimize_bandwidth = dcn20_optimize_bandwidth, |
| .update_bandwidth = dcn20_update_bandwidth, |
| .set_drr = dcn10_set_drr, |
| .get_position = dcn10_get_position, |
| .set_static_screen_control = dcn10_set_static_screen_control, |
| .setup_stereo = dcn10_setup_stereo, |
| .set_avmute = dcn30_set_avmute, |
| .log_hw_state = dcn10_log_hw_state, |
| .get_hw_state = dcn10_get_hw_state, |
| .clear_status_bits = dcn10_clear_status_bits, |
| .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect, |
| .edp_backlight_control = dce110_edp_backlight_control, |
| .edp_power_control = dce110_edp_power_control, |
| .edp_wait_for_T12 = dce110_edp_wait_for_T12, |
| .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready, |
| .set_cursor_position = dcn10_set_cursor_position, |
| .set_cursor_attribute = dcn10_set_cursor_attribute, |
| .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level, |
| .setup_periodic_interrupt = dcn10_setup_periodic_interrupt, |
| .set_clock = dcn10_set_clock, |
| .get_clock = dcn10_get_clock, |
| .program_triplebuffer = dcn20_program_triple_buffer, |
| .enable_writeback = dcn30_enable_writeback, |
| .disable_writeback = dcn30_disable_writeback, |
| .update_writeback = dcn30_update_writeback, |
| .mmhubbub_warmup = dcn30_mmhubbub_warmup, |
| .dmdata_status_done = dcn20_dmdata_status_done, |
| .program_dmdata_engine = dcn30_program_dmdata_engine, |
| .set_dmdata_attributes = dcn20_set_dmdata_attributes, |
| .init_sys_ctx = dcn31_init_sys_ctx, |
| .init_vm_ctx = dcn20_init_vm_ctx, |
| .set_flip_control_gsl = dcn20_set_flip_control_gsl, |
| .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync, |
| .calc_vupdate_position = dcn10_calc_vupdate_position, |
| .power_down = dce110_power_down, |
| .set_backlight_level = dcn21_set_backlight_level, |
| .set_abm_immediate_disable = dcn21_set_abm_immediate_disable, |
| .set_pipe = dcn21_set_pipe, |
| .z10_restore = dcn31_z10_restore, |
| .z10_save_init = dcn31_z10_save_init, |
| .set_disp_pattern_generator = dcn30_set_disp_pattern_generator, |
| .exit_optimized_pwr_state = dcn21_exit_optimized_pwr_state, |
| .update_visual_confirm_color = dcn20_update_visual_confirm_color, |
| }; |
| |
| static const struct hwseq_private_funcs dcn31_private_funcs = { |
| .init_pipes = dcn10_init_pipes, |
| .update_plane_addr = dcn20_update_plane_addr, |
| .plane_atomic_disconnect = dcn10_plane_atomic_disconnect, |
| .update_mpcc = dcn20_update_mpcc, |
| .set_input_transfer_func = dcn30_set_input_transfer_func, |
| .set_output_transfer_func = dcn30_set_output_transfer_func, |
| .power_down = dce110_power_down, |
| .enable_display_power_gating = dcn10_dummy_display_power_gating, |
| .blank_pixel_data = dcn20_blank_pixel_data, |
| .reset_hw_ctx_wrap = dcn31_reset_hw_ctx_wrap, |
| .enable_stream_timing = dcn20_enable_stream_timing, |
| .edp_backlight_control = dce110_edp_backlight_control, |
| .disable_stream_gating = dcn20_disable_stream_gating, |
| .enable_stream_gating = dcn20_enable_stream_gating, |
| .setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt, |
| .did_underflow_occur = dcn10_did_underflow_occur, |
| .init_blank = dcn20_init_blank, |
| .disable_vga = dcn20_disable_vga, |
| .bios_golden_init = dcn10_bios_golden_init, |
| .plane_atomic_disable = dcn20_plane_atomic_disable, |
| .plane_atomic_power_down = dcn10_plane_atomic_power_down, |
| .enable_power_gating_plane = dcn31_enable_power_gating_plane, |
| .hubp_pg_control = dcn31_hubp_pg_control, |
| .program_all_writeback_pipes_in_tree = dcn30_program_all_writeback_pipes_in_tree, |
| .update_odm = dcn20_update_odm, |
| .dsc_pg_control = dcn31_dsc_pg_control, |
| .set_hdr_multiplier = dcn10_set_hdr_multiplier, |
| .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high, |
| .wait_for_blank_complete = dcn20_wait_for_blank_complete, |
| .dccg_init = dcn20_dccg_init, |
| .set_blend_lut = dcn30_set_blend_lut, |
| .set_shaper_3dlut = dcn20_set_shaper_3dlut, |
| .setup_hpo_hw_control = dcn31_setup_hpo_hw_control, |
| }; |
| |
| void dcn31_hw_sequencer_construct(struct dc *dc) |
| { |
| dc->hwss = dcn31_funcs; |
| dc->hwseq->funcs = dcn31_private_funcs; |
| |
| if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| dc->hwss.init_hw = dcn20_fpga_init_hw; |
| dc->hwseq->funcs.init_pipes = NULL; |
| } |
| } |
