| What: /sys/kernel/config/most_<component> |
| Date: March 8, 2019 |
| KernelVersion: 5.2 |
| Description: Interface is used to configure and connect device channels |
| to component drivers. |
| |
| Attributes are visible only when configfs is mounted. To mount |
| configfs in /sys/kernel/config directory use: |
| # mount -t configfs none /sys/kernel/config/ |
| |
| |
| What: /sys/kernel/config/most_cdev/<link> |
| Date: March 8, 2019 |
| KernelVersion: 5.2 |
| Description: |
| The attributes: |
| |
| buffer_size configure the buffer size for this channel |
| |
| subbuffer_size configure the sub-buffer size for this channel |
| (needed for synchronous and isochrnous data) |
| |
| |
| num_buffers configure number of buffers used for this |
| channel |
| |
| datatype configure type of data that will travel over |
| this channel |
| |
| direction configure whether this link will be an input |
| or output |
| |
| dbr_size configure DBR data buffer size (this is used |
| for MediaLB communication only) |
| |
| packets_per_xact |
| configure the number of packets that will be |
| collected from the network before being |
| transmitted via USB (this is used for USB |
| communication only) |
| |
| device name of the device the link is to be attached to |
| |
| channel name of the channel the link is to be attached to |
| |
| comp_params pass parameters needed by some components |
| |
| create_link write '1' to this attribute to trigger the |
| creation of the link. In case of speculative |
| configuration, the creation is post-poned until |
| a physical device is being attached to the bus. |
| |
| destroy_link write '1' to this attribute to destroy an |
| active link |
| |
| What: /sys/kernel/config/most_video/<link> |
| Date: March 8, 2019 |
| KernelVersion: 5.2 |
| Description: |
| The attributes: |
| |
| buffer_size configure the buffer size for this channel |
| |
| subbuffer_size configure the sub-buffer size for this channel |
| (needed for synchronous and isochrnous data) |
| |
| |
| num_buffers configure number of buffers used for this |
| channel |
| |
| datatype configure type of data that will travel over |
| this channel |
| |
| direction configure whether this link will be an input |
| or output |
| |
| dbr_size configure DBR data buffer size (this is used |
| for MediaLB communication only) |
| |
| packets_per_xact |
| configure the number of packets that will be |
| collected from the network before being |
| transmitted via USB (this is used for USB |
| communication only) |
| |
| device name of the device the link is to be attached to |
| |
| channel name of the channel the link is to be attached to |
| |
| comp_params pass parameters needed by some components |
| |
| create_link write '1' to this attribute to trigger the |
| creation of the link. In case of speculative |
| configuration, the creation is post-poned until |
| a physical device is being attached to the bus. |
| |
| destroy_link write '1' to this attribute to destroy an |
| active link |
| |
| What: /sys/kernel/config/most_net/<link> |
| Date: March 8, 2019 |
| KernelVersion: 5.2 |
| Description: |
| The attributes: |
| |
| buffer_size configure the buffer size for this channel |
| |
| subbuffer_size configure the sub-buffer size for this channel |
| (needed for synchronous and isochrnous data) |
| |
| |
| num_buffers configure number of buffers used for this |
| channel |
| |
| datatype configure type of data that will travel over |
| this channel |
| |
| direction configure whether this link will be an input |
| or output |
| |
| dbr_size configure DBR data buffer size (this is used |
| for MediaLB communication only) |
| |
| packets_per_xact |
| configure the number of packets that will be |
| collected from the network before being |
| transmitted via USB (this is used for USB |
| communication only) |
| |
| device name of the device the link is to be attached to |
| |
| channel name of the channel the link is to be attached to |
| |
| comp_params pass parameters needed by some components |
| |
| create_link write '1' to this attribute to trigger the |
| creation of the link. In case of speculative |
| configuration, the creation is post-poned until |
| a physical device is being attached to the bus. |
| |
| destroy_link write '1' to this attribute to destroy an |
| active link |
| |
| What: /sys/kernel/config/most_sound/<card> |
| Date: March 8, 2019 |
| KernelVersion: 5.2 |
| Description: |
| The attributes: |
| |
| create_card write '1' to this attribute to trigger the |
| registration of the sound card with the ALSA |
| subsystem. |
| |
| What: /sys/kernel/config/most_sound/<card>/<link> |
| Date: March 8, 2019 |
| KernelVersion: 5.2 |
| Description: |
| The attributes: |
| |
| buffer_size configure the buffer size for this channel |
| |
| subbuffer_size configure the sub-buffer size for this channel |
| (needed for synchronous and isochrnous data) |
| |
| |
| num_buffers configure number of buffers used for this |
| channel |
| |
| datatype configure type of data that will travel over |
| this channel |
| |
| direction configure whether this link will be an input |
| or output |
| |
| dbr_size configure DBR data buffer size (this is used |
| for MediaLB communication only) |
| |
| packets_per_xact |
| configure the number of packets that will be |
| collected from the network before being |
| transmitted via USB (this is used for USB |
| communication only) |
| |
| device name of the device the link is to be attached to |
| |
| channel name of the channel the link is to be attached to |
| |
| comp_params pass parameters needed by some components |
| |
| create_link write '1' to this attribute to trigger the |
| creation of the link. In case of speculative |
| configuration, the creation is post-poned until |
| a physical device is being attached to the bus. |
| |
| destroy_link write '1' to this attribute to destroy an |
| active link |
