blob: 183ec23eda39be8fc6b33a7a0ab5bcda6d89a0db [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP PCA95xx I2C GPIO multiplexer
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
description: |+
Bindings for the family of I2C GPIO multiplexers/expanders: NXP PCA95xx,
Maxim MAX73xx
properties:
compatible:
enum:
- exar,xra1202
- maxim,max7310
- maxim,max7312
- maxim,max7313
- maxim,max7315
- maxim,max7319
- maxim,max7320
- maxim,max7321
- maxim,max7322
- maxim,max7323
- maxim,max7324
- maxim,max7325
- maxim,max7326
- maxim,max7327
- nxp,pca6416
- nxp,pca9505
- nxp,pca9534
- nxp,pca9535
- nxp,pca9536
- nxp,pca9537
- nxp,pca9538
- nxp,pca9539
- nxp,pca9554
- nxp,pca9555
- nxp,pca9556
- nxp,pca9557
- nxp,pca9574
- nxp,pca9575
- nxp,pca9698
- nxp,pcal6416
- nxp,pcal6524
- nxp,pcal9535
- nxp,pcal9555a
- onnn,cat9554
- onnn,pca9654
- ti,pca6107
- ti,pca9536
- ti,tca6408
- ti,tca6416
- ti,tca6424
- ti,tca9539
- ti,tca9554
reg:
maxItems: 1
gpio-controller: true
'#gpio-cells':
const: 2
gpio-line-names:
minItems: 1
maxItems: 32
interrupts:
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
const: 2
reset-gpios:
description:
GPIO specification for the RESET input. This is an active low signal to
the PCA953x. Not valid for Maxim MAX732x devices.
vcc-supply:
description:
Optional power supply. Not valid for Maxim MAX732x devices.
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
patternProperties:
"^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
type: object
properties:
gpio-hog: true
gpios: true
input: true
output-high: true
output-low: true
line-name: true
required:
- gpio-hog
- gpios
additionalProperties: false
required:
- compatible
- reg
- gpio-controller
- "#gpio-cells"
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
enum:
- maxim,max7320
- maxim,max7321
- maxim,max7322
- maxim,max7323
- maxim,max7324
- maxim,max7325
- maxim,max7326
- maxim,max7327
then:
properties:
reset-gpios: false
vcc-supply: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
gpio@20 {
compatible = "nxp,pca9505";
reg = <0x20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pca9505>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio3>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
usb3-sata-sel-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb3_sata_sel";
};
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c1 {
#address-cells = <1>;
#size-cells = <0>;
gpio99: gpio@22 {
compatible = "nxp,pcal6524";
reg = <0x22>;
interrupt-parent = <&gpio6>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
interrupt-controller;
#interrupt-cells = <2>;
vcc-supply = <&vdds_1v8_main>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03",
"vibra", "fault2", "p06", "p07", "en-usb",
"en-host1", "en-host2", "chg-int", "p14", "p15",
"mic-int", "en-modem", "shdn-hs-amp",
"chg-status+red", "green", "blue", "en-esata",
"fault1", "p26", "p27";
};
ts3a227@3b {
compatible = "ti,ts3a227e";
reg = <0x3b>;
interrupt-parent = <&gpio99>;
interrupts = <14 IRQ_TYPE_EDGE_RISING>;
ti,micbias = <0>; /* 2.1V */
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c2 {
#address-cells = <1>;
#size-cells = <0>;
/* MAX7325 with interrupt support enabled */
gpio@6d {
compatible = "maxim,max7325";
reg = <0x6d>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio4>;
interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
};
};
- |
i2c3 {
#address-cells = <1>;
#size-cells = <0>;
/* MAX7325 with interrupt support disabled */
gpio@6e {
compatible = "maxim,max7325";
reg = <0x6e>;
gpio-controller;
#gpio-cells = <2>;
};
};