| // SPDX-License-Identifier: GPL-2.0+ |
| /* Copyright (c) 2017 NXP. */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define PHY_CTRL0 0x0 |
| #define PHY_CTRL0_REF_SSP_EN BIT(2) |
| #define PHY_CTRL0_FSEL_MASK GENMASK(10, 5) |
| #define PHY_CTRL0_FSEL_24M 0x2a |
| |
| #define PHY_CTRL1 0x4 |
| #define PHY_CTRL1_RESET BIT(0) |
| #define PHY_CTRL1_COMMONONN BIT(1) |
| #define PHY_CTRL1_ATERESET BIT(3) |
| #define PHY_CTRL1_VDATSRCENB0 BIT(19) |
| #define PHY_CTRL1_VDATDETENB0 BIT(20) |
| |
| #define PHY_CTRL2 0x8 |
| #define PHY_CTRL2_TXENABLEN0 BIT(8) |
| #define PHY_CTRL2_OTG_DISABLE BIT(9) |
| |
| #define PHY_CTRL6 0x18 |
| #define PHY_CTRL6_ALT_CLK_EN BIT(1) |
| #define PHY_CTRL6_ALT_CLK_SEL BIT(0) |
| |
| struct imx8mq_usb_phy { |
| struct phy *phy; |
| struct clk *clk; |
| void __iomem *base; |
| struct regulator *vbus; |
| }; |
| |
| static int imx8mq_usb_phy_init(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| u32 value; |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 | |
| PHY_CTRL1_COMMONONN); |
| value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value |= PHY_CTRL0_REF_SSP_EN; |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| value = readl(imx_phy->base + PHY_CTRL2); |
| value |= PHY_CTRL2_TXENABLEN0; |
| writel(value, imx_phy->base + PHY_CTRL2); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| return 0; |
| } |
| |
| static int imx8mp_usb_phy_init(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| u32 value; |
| |
| /* USB3.0 PHY signal fsel for 24M ref */ |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value &= ~PHY_CTRL0_FSEL_MASK; |
| value |= FIELD_PREP(PHY_CTRL0_FSEL_MASK, PHY_CTRL0_FSEL_24M); |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| /* Disable alt_clk_en and use internal MPLL clocks */ |
| value = readl(imx_phy->base + PHY_CTRL6); |
| value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN); |
| writel(value, imx_phy->base + PHY_CTRL6); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0); |
| value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value |= PHY_CTRL0_REF_SSP_EN; |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| value = readl(imx_phy->base + PHY_CTRL2); |
| value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE; |
| writel(value, imx_phy->base + PHY_CTRL2); |
| |
| udelay(10); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| return 0; |
| } |
| |
| static int imx8mq_phy_power_on(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| int ret; |
| |
| ret = regulator_enable(imx_phy->vbus); |
| if (ret) |
| return ret; |
| |
| return clk_prepare_enable(imx_phy->clk); |
| } |
| |
| static int imx8mq_phy_power_off(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| |
| clk_disable_unprepare(imx_phy->clk); |
| regulator_disable(imx_phy->vbus); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops imx8mq_usb_phy_ops = { |
| .init = imx8mq_usb_phy_init, |
| .power_on = imx8mq_phy_power_on, |
| .power_off = imx8mq_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct phy_ops imx8mp_usb_phy_ops = { |
| .init = imx8mp_usb_phy_init, |
| .power_on = imx8mq_phy_power_on, |
| .power_off = imx8mq_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct of_device_id imx8mq_usb_phy_of_match[] = { |
| {.compatible = "fsl,imx8mq-usb-phy", |
| .data = &imx8mq_usb_phy_ops,}, |
| {.compatible = "fsl,imx8mp-usb-phy", |
| .data = &imx8mp_usb_phy_ops,}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); |
| |
| static int imx8mq_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct phy_provider *phy_provider; |
| struct device *dev = &pdev->dev; |
| struct imx8mq_usb_phy *imx_phy; |
| struct resource *res; |
| const struct phy_ops *phy_ops; |
| |
| imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL); |
| if (!imx_phy) |
| return -ENOMEM; |
| |
| imx_phy->clk = devm_clk_get(dev, "phy"); |
| if (IS_ERR(imx_phy->clk)) { |
| dev_err(dev, "failed to get imx8mq usb phy clock\n"); |
| return PTR_ERR(imx_phy->clk); |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| imx_phy->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(imx_phy->base)) |
| return PTR_ERR(imx_phy->base); |
| |
| phy_ops = of_device_get_match_data(dev); |
| if (!phy_ops) |
| return -EINVAL; |
| |
| imx_phy->phy = devm_phy_create(dev, NULL, phy_ops); |
| if (IS_ERR(imx_phy->phy)) |
| return PTR_ERR(imx_phy->phy); |
| |
| imx_phy->vbus = devm_regulator_get(dev, "vbus"); |
| if (IS_ERR(imx_phy->vbus)) |
| return PTR_ERR(imx_phy->vbus); |
| |
| phy_set_drvdata(imx_phy->phy, imx_phy); |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static struct platform_driver imx8mq_usb_phy_driver = { |
| .probe = imx8mq_usb_phy_probe, |
| .driver = { |
| .name = "imx8mq-usb-phy", |
| .of_match_table = imx8mq_usb_phy_of_match, |
| } |
| }; |
| module_platform_driver(imx8mq_usb_phy_driver); |
| |
| MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver"); |
| MODULE_LICENSE("GPL"); |