| /* |
| * Watchdog driver for SBC-FITPC2 board |
| * |
| * Author: Denis Turischev <denis@compulab.co.il> |
| * |
| * Adapted from the IXP2000 watchdog driver by Deepak Saxena. |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME " WATCHDOG: " fmt |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/moduleparam.h> |
| #include <linux/dmi.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| static unsigned int margin = 60; /* (secs) Default is 1 minute */ |
| static unsigned long wdt_status; |
| static DEFINE_MUTEX(wdt_lock); |
| |
| #define WDT_IN_USE 0 |
| #define WDT_OK_TO_CLOSE 1 |
| |
| #define COMMAND_PORT 0x4c |
| #define DATA_PORT 0x48 |
| |
| #define IFACE_ON_COMMAND 1 |
| #define REBOOT_COMMAND 2 |
| |
| #define WATCHDOG_NAME "SBC-FITPC2 Watchdog" |
| |
| static void wdt_send_data(unsigned char command, unsigned char data) |
| { |
| outb(data, DATA_PORT); |
| msleep(200); |
| outb(command, COMMAND_PORT); |
| msleep(100); |
| } |
| |
| static void wdt_enable(void) |
| { |
| mutex_lock(&wdt_lock); |
| wdt_send_data(IFACE_ON_COMMAND, 1); |
| wdt_send_data(REBOOT_COMMAND, margin); |
| mutex_unlock(&wdt_lock); |
| } |
| |
| static void wdt_disable(void) |
| { |
| mutex_lock(&wdt_lock); |
| wdt_send_data(IFACE_ON_COMMAND, 0); |
| wdt_send_data(REBOOT_COMMAND, 0); |
| mutex_unlock(&wdt_lock); |
| } |
| |
| static int fitpc2_wdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(WDT_IN_USE, &wdt_status)) |
| return -EBUSY; |
| |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| wdt_enable(); |
| |
| return stream_open(inode, file); |
| } |
| |
| static ssize_t fitpc2_wdt_write(struct file *file, const char *data, |
| size_t len, loff_t *ppos) |
| { |
| size_t i; |
| |
| if (!len) |
| return 0; |
| |
| if (nowayout) { |
| len = 0; |
| goto out; |
| } |
| |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| for (i = 0; i != len; i++) { |
| char c; |
| |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| |
| if (c == 'V') |
| set_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| } |
| |
| out: |
| wdt_enable(); |
| |
| return len; |
| } |
| |
| |
| static const struct watchdog_info ident = { |
| .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING, |
| .identity = WATCHDOG_NAME, |
| }; |
| |
| |
| static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int ret = -ENOTTY; |
| int time; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| ret = copy_to_user((struct watchdog_info *)arg, &ident, |
| sizeof(ident)) ? -EFAULT : 0; |
| break; |
| |
| case WDIOC_GETSTATUS: |
| ret = put_user(0, (int *)arg); |
| break; |
| |
| case WDIOC_GETBOOTSTATUS: |
| ret = put_user(0, (int *)arg); |
| break; |
| |
| case WDIOC_KEEPALIVE: |
| wdt_enable(); |
| ret = 0; |
| break; |
| |
| case WDIOC_SETTIMEOUT: |
| ret = get_user(time, (int *)arg); |
| if (ret) |
| break; |
| |
| if (time < 31 || time > 255) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| margin = time; |
| wdt_enable(); |
| fallthrough; |
| |
| case WDIOC_GETTIMEOUT: |
| ret = put_user(margin, (int *)arg); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int fitpc2_wdt_release(struct inode *inode, struct file *file) |
| { |
| if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { |
| wdt_disable(); |
| pr_info("Device disabled\n"); |
| } else { |
| pr_warn("Device closed unexpectedly - timer will not stop\n"); |
| wdt_enable(); |
| } |
| |
| clear_bit(WDT_IN_USE, &wdt_status); |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| return 0; |
| } |
| |
| |
| static const struct file_operations fitpc2_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = fitpc2_wdt_write, |
| .unlocked_ioctl = fitpc2_wdt_ioctl, |
| .compat_ioctl = compat_ptr_ioctl, |
| .open = fitpc2_wdt_open, |
| .release = fitpc2_wdt_release, |
| }; |
| |
| static struct miscdevice fitpc2_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &fitpc2_wdt_fops, |
| }; |
| |
| static int __init fitpc2_wdt_init(void) |
| { |
| int err; |
| const char *brd_name; |
| |
| brd_name = dmi_get_system_info(DMI_BOARD_NAME); |
| |
| if (!brd_name || !strstr(brd_name, "SBC-FITPC2")) |
| return -ENODEV; |
| |
| pr_info("%s found\n", brd_name); |
| |
| if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) { |
| pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT); |
| return -EIO; |
| } |
| |
| if (!request_region(DATA_PORT, 1, WATCHDOG_NAME)) { |
| pr_err("I/O address 0x%04x already in use\n", DATA_PORT); |
| err = -EIO; |
| goto err_data_port; |
| } |
| |
| if (margin < 31 || margin > 255) { |
| pr_err("margin must be in range 31 - 255 seconds, you tried to set %d\n", |
| margin); |
| err = -EINVAL; |
| goto err_margin; |
| } |
| |
| err = misc_register(&fitpc2_wdt_miscdev); |
| if (err) { |
| pr_err("cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, err); |
| goto err_margin; |
| } |
| |
| return 0; |
| |
| err_margin: |
| release_region(DATA_PORT, 1); |
| err_data_port: |
| release_region(COMMAND_PORT, 1); |
| |
| return err; |
| } |
| |
| static void __exit fitpc2_wdt_exit(void) |
| { |
| misc_deregister(&fitpc2_wdt_miscdev); |
| release_region(DATA_PORT, 1); |
| release_region(COMMAND_PORT, 1); |
| } |
| |
| module_init(fitpc2_wdt_init); |
| module_exit(fitpc2_wdt_exit); |
| |
| MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); |
| MODULE_DESCRIPTION("SBC-FITPC2 Watchdog"); |
| |
| module_param(margin, int, 0); |
| MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); |
| |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); |
| |
| MODULE_LICENSE("GPL"); |