| // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) |
| /* |
| * Copyright (c) 2017-2019 Andreas Färber |
| */ |
| |
| /memreserve/ 0x00000000 0x0000a800; /* boot code */ |
| /memreserve/ 0x0000a800 0x000f5800; |
| /memreserve/ 0x17fff000 0x00001000; |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset/realtek,rtd1195.h> |
| |
| / { |
| compatible = "realtek,rtd1195"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| clock-frequency = <1000000000>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x1>; |
| clock-frequency = <1000000000>; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| rpc_comm: rpc@b000 { |
| reg = <0x0000b000 0x1000>; |
| }; |
| |
| audio@1b00000 { |
| reg = <0x01b00000 0x400000>; |
| }; |
| |
| rpc_ringbuf: rpc@1ffe000 { |
| reg = <0x01ffe000 0x4000>; |
| }; |
| |
| secure@10000000 { |
| reg = <0x10000000 0x100000>; |
| no-map; |
| }; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| clock-frequency = <27000000>; |
| }; |
| |
| osc27M: osc { |
| compatible = "fixed-clock"; |
| clock-frequency = <27000000>; |
| #clock-cells = <0>; |
| clock-output-names = "osc27M"; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x0000a800>, |
| <0x18000000 0x18000000 0x00070000>, |
| <0x18100000 0x18100000 0x01000000>, |
| <0x80000000 0x80000000 0x80000000>; |
| |
| rbus: bus@18000000 { |
| compatible = "simple-bus"; |
| reg = <0x18000000 0x70000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x18000000 0x70000>; |
| |
| crt: syscon@0 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x0 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1000>; |
| }; |
| |
| iso: syscon@7000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x7000 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x7000 0x1000>; |
| }; |
| |
| sb2: syscon@1a000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x1a000 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1a000 0x1000>; |
| }; |
| |
| misc: syscon@1b000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x1b000 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1b000 0x1000>; |
| }; |
| |
| scpu_wrapper: syscon@1d000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x1d000 0x1000>; |
| reg-io-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1d000 0x1000>; |
| }; |
| }; |
| |
| gic: interrupt-controller@ff011000 { |
| compatible = "arm,cortex-a7-gic"; |
| reg = <0xff011000 0x1000>, |
| <0xff012000 0x2000>, |
| <0xff014000 0x2000>, |
| <0xff016000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| }; |
| }; |
| |
| &crt { |
| reset1: reset-controller@0 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x0 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| reset2: reset-controller@4 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x4 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| reset3: reset-controller@8 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x8 0x4>; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| &iso { |
| iso_reset: reset-controller@88 { |
| compatible = "snps,dw-low-reset"; |
| reg = <0x88 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| wdt: watchdog@680 { |
| compatible = "realtek,rtd1295-watchdog"; |
| reg = <0x680 0x100>; |
| clocks = <&osc27M>; |
| }; |
| |
| uart0: serial@800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x800 0x400>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| resets = <&iso_reset RTD1195_ISO_RSTN_UR0>; |
| clock-frequency = <27000000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &misc { |
| uart1: serial@200 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x200 0x100>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| resets = <&reset2 RTD1195_RSTN_UR1>; |
| clock-frequency = <27000000>; |
| status = "disabled"; |
| }; |
| }; |