arch/arm/kernel/hyp-stub.S - linux - Git at Google

 /*
  * Copyright (c) 2012 Linaro Limited.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License along
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */

 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/virt.h>

 #ifndef ZIMAGE
 /*
  * For the kernel proper, we need to find out the CPU boot mode long after
  * boot, so we need to store it in a writable variable.
  *
  * This is not in .bss, because we set it sufficiently early that the boot-time
  * zeroing of .bss would clobber it.
  */
 .data
 ENTRY(__boot_cpu_mode)
 	.long	0
 .text

 	/*
 	 * Save the primary CPU boot mode. Requires 3 scratch registers.
 	 */
 	.macro	store_primary_cpu_mode	reg1, reg2, reg3
 	mrs	\reg1, cpsr
 	and	\reg1, \reg1, #MODE_MASK
 	adr	\reg2, .L__boot_cpu_mode_offset
 	ldr	\reg3, [\reg2]
 	str	\reg1, [\reg2, \reg3]
 	.endm

 	/*
 	 * Compare the current mode with the one saved on the primary CPU.
 	 * If they don't match, record that fact. The Z bit indicates
 	 * if there's a match or not.
 	 * Requires 3 additionnal scratch registers.
 	 */
 	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
 	adr	\reg2, .L__boot_cpu_mode_offset
 	ldr	\reg3, [\reg2]
 	ldr	\reg1, [\reg2, \reg3]
 	cmp	\mode, \reg1		@ matches primary CPU boot mode?
 	orrne	\reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
 	strne	\reg1, [\reg2, \reg3]	@ record what happened and give up
 	.endm

 #else	/* ZIMAGE */

 	.macro	store_primary_cpu_mode	reg1:req, reg2:req, reg3:req
 	.endm

 /*
  * The zImage loader only runs on one CPU, so we don't bother with mult-CPU
  * consistency checking:
  */
 	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
 	cmp	\mode, \mode
 	.endm

 #endif /* ZIMAGE */

 /*
  * Hypervisor stub installation functions.
  *
  * These must be called with the MMU and D-cache off.
  * They are not ABI compliant and are only intended to be called from the kernel
  * entry points in head.S.
  */
 @ Call this from the primary CPU
 ENTRY(__hyp_stub_install)
 	store_primary_cpu_mode	r4, r5, r6
 ENDPROC(__hyp_stub_install)

 	@ fall through...

 @ Secondary CPUs should call here
 ENTRY(__hyp_stub_install_secondary)
 	mrs	r4, cpsr
 	and	r4, r4, #MODE_MASK

 	/*
 	 * If the secondary has booted with a different mode, give up
 	 * immediately.
 	 */
 	compare_cpu_mode_with_primary	r4, r5, r6, r7
 	retne	lr

 	/*
 	 * Once we have given up on one CPU, we do not try to install the
 	 * stub hypervisor on the remaining ones: because the saved boot mode
 	 * is modified, it can't compare equal to the CPSR mode field any
 	 * more.
 	 *
 	 * Otherwise...
 	 */

 	cmp	r4, #HYP_MODE
 	retne	lr			@ give up if the CPU is not in HYP mode

 /*
  * Configure HSCTLR to set correct exception endianness/instruction set
  * state etc.
  * Turn off all traps
  * Eventually, CPU-specific code might be needed -- assume not for now
  *
  * This code relies on the "eret" instruction to synchronize the
  * various coprocessor accesses. This is done when we switch to SVC
  * (see safe_svcmode_maskall).
  */
 	@ Now install the hypervisor stub:
 	adr	r7, __hyp_stub_vectors
 	mcr	p15, 4, r7, c12, c0, 0	@ set hypervisor vector base (HVBAR)

 	@ Disable all traps, so we don't get any nasty surprise
 	mov	r7, #0
 	mcr	p15, 4, r7, c1, c1, 0	@ HCR
 	mcr	p15, 4, r7, c1, c1, 2	@ HCPTR
 	mcr	p15, 4, r7, c1, c1, 3	@ HSTR

 THUMB(	orr	r7, #(1 << 30)	)	@ HSCTLR.TE
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	orr	r7, #(1 << 9)		@ HSCTLR.EE
 #endif
 	mcr	p15, 4, r7, c1, c0, 0	@ HSCTLR

 	mrc	p15, 4, r7, c1, c1, 1	@ HDCR
 	and	r7, #0x1f		@ Preserve HPMN
 	mcr	p15, 4, r7, c1, c1, 1	@ HDCR

 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
 	lsr	r7, #16
 	and	r7, #0xf
 	cmp	r7, #1
 	bne	1f
 	mrc	p15, 4, r7, c14, c1, 0	@ CNTHCTL
 	orr	r7, r7, #3		@ PL1PCEN | PL1PCTEN
 	mcr	p15, 4, r7, c14, c1, 0	@ CNTHCTL
 	mov	r7, #0
 	mcrr	p15, 4, r7, r7, c14	@ CNTVOFF

 	@ Disable virtual timer in case it was counting
 	mrc	p15, 0, r7, c14, c3, 1	@ CNTV_CTL
 	bic	r7, #1			@ Clear ENABLE
 	mcr	p15, 0, r7, c14, c3, 1	@ CNTV_CTL
 1:
 #endif

 	bx	lr			@ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)

 __hyp_stub_do_trap:
 	cmp	r0, #-1
 	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
 	mcrne	p15, 4, r0, c12, c0, 0	@ set HVBAR
 	__ERET
 ENDPROC(__hyp_stub_do_trap)

 /*
  * __hyp_set_vectors: Call this after boot to set the initial hypervisor
  * vectors as part of hypervisor installation.  On an SMP system, this should
  * be called on each CPU.
  *
  * r0 must be the physical address of the new vector table (which must lie in
  * the bottom 4GB of physical address space.
  *
  * r0 must be 32-byte aligned.
  *
  * Before calling this, you must check that the stub hypervisor is installed
  * everywhere, by waiting for any secondary CPUs to be brought up and then
  * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true.
  *
  * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
  * something else went wrong... in such cases, trying to install a new
  * hypervisor is unlikely to work as desired.
  *
  * When you call into your shiny new hypervisor, sp_hyp will contain junk,
  * so you will need to set that to something sensible at the new hypervisor's
  * initialisation entry point.
  */
 ENTRY(__hyp_get_vectors)
 	mov	r0, #-1
 ENDPROC(__hyp_get_vectors)
 	@ fall through
 ENTRY(__hyp_set_vectors)
 	__HVC(0)
 	ret	lr
 ENDPROC(__hyp_set_vectors)

 #ifndef ZIMAGE
 .align 2
 .L__boot_cpu_mode_offset:
 	.long	__boot_cpu_mode - .
 #endif

 .align 5
 __hyp_stub_vectors:
 __hyp_stub_reset:	W(b)	.
 __hyp_stub_und:		W(b)	.
 __hyp_stub_svc:		W(b)	.
 __hyp_stub_pabort:	W(b)	.
 __hyp_stub_dabort:	W(b)	.
 __hyp_stub_trap:	W(b)	__hyp_stub_do_trap
 __hyp_stub_irq:		W(b)	.
 __hyp_stub_fiq:		W(b)	.
 ENDPROC(__hyp_stub_vectors)
	/*
	* Copyright (c) 2012 Linaro Limited.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
	*/

	#include <linux/init.h>
	#include <linux/linkage.h>
	#include <asm/assembler.h>
	#include <asm/virt.h>

	#ifndef ZIMAGE
	/*
	* For the kernel proper, we need to find out the CPU boot mode long after
	* boot, so we need to store it in a writable variable.
	*
	* This is not in .bss, because we set it sufficiently early that the boot-time
	* zeroing of .bss would clobber it.
	*/
	.data
	ENTRY(__boot_cpu_mode)
	.long 0
	.text

	/*
	* Save the primary CPU boot mode. Requires 3 scratch registers.
	*/
	.macro store_primary_cpu_mode reg1, reg2, reg3
	mrs \reg1, cpsr
	and \reg1, \reg1, #MODE_MASK
	adr \reg2, .L__boot_cpu_mode_offset
	ldr \reg3, [\reg2]
	str \reg1, [\reg2, \reg3]
	.endm

	/*
	* Compare the current mode with the one saved on the primary CPU.
	* If they don't match, record that fact. The Z bit indicates
	* if there's a match or not.
	* Requires 3 additionnal scratch registers.
	*/
	.macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3
	adr \reg2, .L__boot_cpu_mode_offset
	ldr \reg3, [\reg2]
	ldr \reg1, [\reg2, \reg3]
	cmp \mode, \reg1 @ matches primary CPU boot mode?
	orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
	strne \reg1, [\reg2, \reg3] @ record what happened and give up
	.endm

	#else /* ZIMAGE */

	.macro store_primary_cpu_mode reg1:req, reg2:req, reg3:req
	.endm

	/*
	* The zImage loader only runs on one CPU, so we don't bother with mult-CPU
	* consistency checking:
	*/
	.macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3
	cmp \mode, \mode
	.endm

	#endif /* ZIMAGE */

	/*
	* Hypervisor stub installation functions.
	*
	* These must be called with the MMU and D-cache off.
	* They are not ABI compliant and are only intended to be called from the kernel
	* entry points in head.S.
	*/
	@ Call this from the primary CPU
	ENTRY(__hyp_stub_install)
	store_primary_cpu_mode r4, r5, r6
	ENDPROC(__hyp_stub_install)

	@ fall through...

	@ Secondary CPUs should call here
	ENTRY(__hyp_stub_install_secondary)
	mrs r4, cpsr
	and r4, r4, #MODE_MASK

	/*
	* If the secondary has booted with a different mode, give up
	* immediately.
	*/
	compare_cpu_mode_with_primary r4, r5, r6, r7
	retne lr

	/*
	* Once we have given up on one CPU, we do not try to install the
	* stub hypervisor on the remaining ones: because the saved boot mode
	* is modified, it can't compare equal to the CPSR mode field any
	* more.
	*
	* Otherwise...
	*/

	cmp r4, #HYP_MODE
	retne lr @ give up if the CPU is not in HYP mode

	/*
	* Configure HSCTLR to set correct exception endianness/instruction set
	* state etc.
	* Turn off all traps
	* Eventually, CPU-specific code might be needed -- assume not for now
	*
	* This code relies on the "eret" instruction to synchronize the
	* various coprocessor accesses. This is done when we switch to SVC
	* (see safe_svcmode_maskall).
	*/
	@ Now install the hypervisor stub:
	adr r7, __hyp_stub_vectors
	mcr p15, 4, r7, c12, c0, 0 @ set hypervisor vector base (HVBAR)

	@ Disable all traps, so we don't get any nasty surprise
	mov r7, #0
	mcr p15, 4, r7, c1, c1, 0 @ HCR
	mcr p15, 4, r7, c1, c1, 2 @ HCPTR
	mcr p15, 4, r7, c1, c1, 3 @ HSTR

	THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE
	#ifdef CONFIG_CPU_BIG_ENDIAN
	orr r7, #(1 << 9) @ HSCTLR.EE
	#endif
	mcr p15, 4, r7, c1, c0, 0 @ HSCTLR

	mrc p15, 4, r7, c1, c1, 1 @ HDCR
	and r7, #0x1f @ Preserve HPMN
	mcr p15, 4, r7, c1, c1, 1 @ HDCR

	#if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
	@ make CNTP_* and CNTPCT accessible from PL1
	mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1
	lsr r7, #16
	and r7, #0xf
	cmp r7, #1
	bne 1f
	mrc p15, 4, r7, c14, c1, 0 @ CNTHCTL
	orr r7, r7, #3 @ PL1PCEN \| PL1PCTEN
	mcr p15, 4, r7, c14, c1, 0 @ CNTHCTL
	mov r7, #0
	mcrr p15, 4, r7, r7, c14 @ CNTVOFF

	@ Disable virtual timer in case it was counting
	mrc p15, 0, r7, c14, c3, 1 @ CNTV_CTL
	bic r7, #1 @ Clear ENABLE
	mcr p15, 0, r7, c14, c3, 1 @ CNTV_CTL
	1:
	#endif

	bx lr @ The boot CPU mode is left in r4.
	ENDPROC(__hyp_stub_install_secondary)

	__hyp_stub_do_trap:
	cmp r0, #-1
	mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
	mcrne p15, 4, r0, c12, c0, 0 @ set HVBAR
	__ERET
	ENDPROC(__hyp_stub_do_trap)

	/*
	* __hyp_set_vectors: Call this after boot to set the initial hypervisor
	* vectors as part of hypervisor installation. On an SMP system, this should
	* be called on each CPU.
	*
	* r0 must be the physical address of the new vector table (which must lie in
	* the bottom 4GB of physical address space.
	*
	* r0 must be 32-byte aligned.
	*
	* Before calling this, you must check that the stub hypervisor is installed
	* everywhere, by waiting for any secondary CPUs to be brought up and then
	* checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true.
	*
	* If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
	* something else went wrong... in such cases, trying to install a new
	* hypervisor is unlikely to work as desired.
	*
	* When you call into your shiny new hypervisor, sp_hyp will contain junk,
	* so you will need to set that to something sensible at the new hypervisor's
	* initialisation entry point.
	*/
	ENTRY(__hyp_get_vectors)
	mov r0, #-1
	ENDPROC(__hyp_get_vectors)
	@ fall through
	ENTRY(__hyp_set_vectors)
	__HVC(0)
	ret lr
	ENDPROC(__hyp_set_vectors)

	#ifndef ZIMAGE
	.align 2
	.L__boot_cpu_mode_offset:
	.long __boot_cpu_mode - .
	#endif

	.align 5
	__hyp_stub_vectors:
	__hyp_stub_reset: W(b) .
	__hyp_stub_und: W(b) .
	__hyp_stub_svc: W(b) .
	__hyp_stub_pabort: W(b) .
	__hyp_stub_dabort: W(b) .
	__hyp_stub_trap: W(b) __hyp_stub_do_trap
	__hyp_stub_irq: W(b) .
	__hyp_stub_fiq: W(b) .
	ENDPROC(__hyp_stub_vectors)