| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Regulator driver for TPS68470 PMIC |
| // |
| // Copyright (c) 2021 Red Hat Inc. |
| // Copyright (C) 2018 Intel Corporation |
| // |
| // Authors: |
| // Hans de Goede <hdegoede@redhat.com> |
| // Zaikuo Wang <zaikuo.wang@intel.com> |
| // Tianshu Qiu <tian.shu.qiu@intel.com> |
| // Jian Xu Zheng <jian.xu.zheng@intel.com> |
| // Yuning Pu <yuning.pu@intel.com> |
| // Rajmohan Mani <rajmohan.mani@intel.com> |
| |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/tps68470.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/tps68470.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| |
| struct tps68470_regulator_data { |
| struct clk *clk; |
| }; |
| |
| #define TPS68470_REGULATOR(_name, _id, _ops, _n, \ |
| _vr, _vm, _er, _em, _lr, _nlr) \ |
| [TPS68470_ ## _name] = { \ |
| .name = # _name, \ |
| .id = _id, \ |
| .ops = &_ops, \ |
| .n_voltages = _n, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = _vr, \ |
| .vsel_mask = _vm, \ |
| .enable_reg = _er, \ |
| .enable_mask = _em, \ |
| .linear_ranges = _lr, \ |
| .n_linear_ranges = _nlr, \ |
| } |
| |
| static const struct linear_range tps68470_ldo_ranges[] = { |
| REGULATOR_LINEAR_RANGE(875000, 0, 125, 17800), |
| }; |
| |
| static const struct linear_range tps68470_core_ranges[] = { |
| REGULATOR_LINEAR_RANGE(900000, 0, 42, 25000), |
| }; |
| |
| static int tps68470_regulator_enable(struct regulator_dev *rdev) |
| { |
| struct tps68470_regulator_data *data = rdev->reg_data; |
| int ret; |
| |
| /* The Core buck regulator needs the PMIC's PLL to be enabled */ |
| if (rdev->desc->id == TPS68470_CORE) { |
| ret = clk_prepare_enable(data->clk); |
| if (ret) { |
| dev_err(&rdev->dev, "Error enabling TPS68470 clock\n"); |
| return ret; |
| } |
| } |
| |
| return regulator_enable_regmap(rdev); |
| } |
| |
| static int tps68470_regulator_disable(struct regulator_dev *rdev) |
| { |
| struct tps68470_regulator_data *data = rdev->reg_data; |
| |
| if (rdev->desc->id == TPS68470_CORE) |
| clk_disable_unprepare(data->clk); |
| |
| return regulator_disable_regmap(rdev); |
| } |
| |
| /* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */ |
| static const struct regulator_ops tps68470_regulator_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = tps68470_regulator_enable, |
| .disable = tps68470_regulator_disable, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| }; |
| |
| static const struct regulator_ops tps68470_always_on_reg_ops = { |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| }; |
| |
| static const struct regulator_desc regulators[] = { |
| TPS68470_REGULATOR(CORE, TPS68470_CORE, tps68470_regulator_ops, 43, |
| TPS68470_REG_VDVAL, TPS68470_VDVAL_DVOLT_MASK, |
| TPS68470_REG_VDCTL, TPS68470_VDCTL_EN_MASK, |
| tps68470_core_ranges, ARRAY_SIZE(tps68470_core_ranges)), |
| TPS68470_REGULATOR(ANA, TPS68470_ANA, tps68470_regulator_ops, 126, |
| TPS68470_REG_VAVAL, TPS68470_VAVAL_AVOLT_MASK, |
| TPS68470_REG_VACTL, TPS68470_VACTL_EN_MASK, |
| tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)), |
| TPS68470_REGULATOR(VCM, TPS68470_VCM, tps68470_regulator_ops, 126, |
| TPS68470_REG_VCMVAL, TPS68470_VCMVAL_VCVOLT_MASK, |
| TPS68470_REG_VCMCTL, TPS68470_VCMCTL_EN_MASK, |
| tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)), |
| TPS68470_REGULATOR(VIO, TPS68470_VIO, tps68470_always_on_reg_ops, 126, |
| TPS68470_REG_VIOVAL, TPS68470_VIOVAL_IOVOLT_MASK, |
| 0, 0, |
| tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)), |
| /* |
| * (1) This regulator must have the same voltage as VIO if S_IO LDO is used to |
| * power a sensor/VCM which I2C is daisy chained behind the PMIC. |
| * (2) If there is no I2C daisy chain it can be set freely. |
| */ |
| TPS68470_REGULATOR(VSIO, TPS68470_VSIO, tps68470_regulator_ops, 126, |
| TPS68470_REG_VSIOVAL, TPS68470_VSIOVAL_IOVOLT_MASK, |
| TPS68470_REG_S_I2C_CTL, TPS68470_S_I2C_CTL_EN_MASK, |
| tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)), |
| TPS68470_REGULATOR(AUX1, TPS68470_AUX1, tps68470_regulator_ops, 126, |
| TPS68470_REG_VAUX1VAL, TPS68470_VAUX1VAL_AUX1VOLT_MASK, |
| TPS68470_REG_VAUX1CTL, TPS68470_VAUX1CTL_EN_MASK, |
| tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)), |
| TPS68470_REGULATOR(AUX2, TPS68470_AUX2, tps68470_regulator_ops, 126, |
| TPS68470_REG_VAUX2VAL, TPS68470_VAUX2VAL_AUX2VOLT_MASK, |
| TPS68470_REG_VAUX2CTL, TPS68470_VAUX2CTL_EN_MASK, |
| tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)), |
| }; |
| |
| static int tps68470_regulator_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct tps68470_regulator_platform_data *pdata = dev_get_platdata(dev); |
| struct tps68470_regulator_data *data; |
| struct regulator_config config = { }; |
| struct regulator_dev *rdev; |
| int i; |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->clk = devm_clk_get(dev, "tps68470-clk"); |
| if (IS_ERR(data->clk)) |
| return dev_err_probe(dev, PTR_ERR(data->clk), "getting tps68470-clk\n"); |
| |
| config.dev = dev->parent; |
| config.regmap = dev_get_drvdata(dev->parent); |
| config.driver_data = data; |
| |
| for (i = 0; i < TPS68470_NUM_REGULATORS; i++) { |
| if (pdata) |
| config.init_data = pdata->reg_init_data[i]; |
| else |
| config.init_data = NULL; |
| |
| rdev = devm_regulator_register(dev, ®ulators[i], &config); |
| if (IS_ERR(rdev)) |
| return dev_err_probe(dev, PTR_ERR(rdev), |
| "registering %s regulator\n", |
| regulators[i].name); |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver tps68470_regulator_driver = { |
| .driver = { |
| .name = "tps68470-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe = tps68470_regulator_probe, |
| }; |
| |
| /* |
| * The ACPI tps68470 probe-ordering depends on the clk/gpio/regulator drivers |
| * registering before the drivers for the camera-sensors which use them bind. |
| * subsys_initcall() ensures this when the drivers are builtin. |
| */ |
| static int __init tps68470_regulator_init(void) |
| { |
| return platform_driver_register(&tps68470_regulator_driver); |
| } |
| subsys_initcall(tps68470_regulator_init); |
| |
| static void __exit tps68470_regulator_exit(void) |
| { |
| platform_driver_unregister(&tps68470_regulator_driver); |
| } |
| module_exit(tps68470_regulator_exit); |
| |
| MODULE_ALIAS("platform:tps68470-regulator"); |
| MODULE_DESCRIPTION("TPS68470 voltage regulator driver"); |
| MODULE_LICENSE("GPL v2"); |