| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Copyright (c) 2019 Mantas Pucka <mantas@8devices.com> |
| // Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr> |
| // |
| // Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator |
| |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| static const unsigned int ipq4019_vmmc_voltages[] = { |
| 1500000, 1800000, 2500000, 3000000, |
| }; |
| |
| static const struct regulator_ops ipq4019_regulator_voltage_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_desc vmmc_regulator = { |
| .name = "vmmcq", |
| .ops = &ipq4019_regulator_voltage_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .volt_table = ipq4019_vmmc_voltages, |
| .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages), |
| .vsel_reg = 0, |
| .vsel_mask = 0x3, |
| }; |
| |
| static const struct regmap_config ipq4019_vmmcq_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| }; |
| |
| static int ipq4019_regulator_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct regulator_init_data *init_data; |
| struct regulator_config cfg = {}; |
| struct regulator_dev *rdev; |
| struct regmap *rmap; |
| void __iomem *base; |
| |
| init_data = of_get_regulator_init_data(dev, dev->of_node, |
| &vmmc_regulator); |
| if (!init_data) |
| return -EINVAL; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); |
| if (IS_ERR(rmap)) |
| return PTR_ERR(rmap); |
| |
| cfg.dev = dev; |
| cfg.init_data = init_data; |
| cfg.of_node = dev->of_node; |
| cfg.regmap = rmap; |
| |
| rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); |
| if (IS_ERR(rdev)) { |
| dev_err(dev, "Failed to register regulator: %ld\n", |
| PTR_ERR(rdev)); |
| return PTR_ERR(rdev); |
| } |
| platform_set_drvdata(pdev, rdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id regulator_ipq4019_of_match[] = { |
| { .compatible = "qcom,vqmmc-ipq4019-regulator", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, regulator_ipq4019_of_match); |
| |
| static struct platform_driver ipq4019_regulator_driver = { |
| .probe = ipq4019_regulator_probe, |
| .driver = { |
| .name = "vqmmc-ipq4019-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = of_match_ptr(regulator_ipq4019_of_match), |
| }, |
| }; |
| module_platform_driver(ipq4019_regulator_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>"); |
| MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); |