drivers/usb/mtu3/mtu3_host.c

// SPDX-License-Identifier: GPL-2.0
/*
 * mtu3_dr.c - dual role switch and host glue layer
 *
 * Copyright (C) 2016 MediaTek Inc.
 *
 * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
 */

#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regmap.h>

#include "mtu3.h"
#include "mtu3_dr.h"

/* mt8173 etc */
#define PERI_WK_CTRL1	0x4
#define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
#define WC1_IS_EN	BIT(25)
#define WC1_IS_P	BIT(6)  /* polarity for ip sleep */

/* mt8183 */
#define PERI_WK_CTRL0	0x0
#define WC0_IS_C(x)	((u32)(((x) & 0xf) << 28))  /* cycle debounce */
#define WC0_IS_P	BIT(12)	/* polarity */
#define WC0_IS_EN	BIT(6)

/* mt8192 */
#define WC0_SSUSB0_CDEN		BIT(6)
#define WC0_IS_SPM_EN		BIT(1)

/* mt8195 */
#define PERI_WK_CTRL0_8195	0x04
#define WC0_IS_P_95		BIT(30)	/* polarity */
#define WC0_IS_C_95(x)		((u32)(((x) & 0x7) << 27))
#define WC0_IS_EN_P3_95		BIT(26)
#define WC0_IS_EN_P2_95		BIT(25)

#define PERI_WK_CTRL1_8195	0x20
#define WC1_IS_C_95(x)		((u32)(((x) & 0xf) << 28))
#define WC1_IS_P_95		BIT(12)
#define WC1_IS_EN_P0_95		BIT(6)

/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL	0x0
#define SSC_IP_SLEEP_EN	BIT(4)
#define SSC_SPM_INT_EN		BIT(1)

enum ssusb_uwk_vers {
	SSUSB_UWK_V1 = 1,
	SSUSB_UWK_V2,
	SSUSB_UWK_V1_1 = 101,	/* specific revision 1.01 */
	SSUSB_UWK_V1_2,		/* specific revision 1.02 */
	SSUSB_UWK_V1_3,		/* mt8195 IP0 */
	SSUSB_UWK_V1_5 = 105,	/* mt8195 IP2 */
	SSUSB_UWK_V1_6,		/* mt8195 IP3 */
};

/*
 * ip-sleep wakeup mode:
 * all clocks can be turn off, but power domain should be kept on
 */
static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
{
	u32 reg, msk, val;

	switch (ssusb->uwk_vers) {
	case SSUSB_UWK_V1:
		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1;
		msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
		val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
		break;
	case SSUSB_UWK_V1_1:
		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
		msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
		val = enable ? (WC0_IS_EN | WC0_IS_C(0x1)) : 0;
		break;
	case SSUSB_UWK_V1_2:
		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
		msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
		val = enable ? msk : 0;
		break;
	case SSUSB_UWK_V1_3:
		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1_8195;
		msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95;
		val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0;
		break;
	case SSUSB_UWK_V1_5:
		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195;
		msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
		val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0;
		break;
	case SSUSB_UWK_V1_6:
		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195;
		msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
		val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
		break;
	case SSUSB_UWK_V2:
		reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
		val = enable ? msk : 0;
		break;
	default:
		return;
	}
	regmap_update_bits(ssusb->uwk, reg, msk, val);
}

int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
				struct device_node *dn)
{
	struct of_phandle_args args;
	int ret;

	/* wakeup function is optional */
	ssusb->uwk_en = of_property_read_bool(dn, "wakeup-source");
	if (!ssusb->uwk_en)
		return 0;

	ret = of_parse_phandle_with_fixed_args(dn,
				"mediatek,syscon-wakeup", 2, 0, &args);
	if (ret)
		return ret;

	ssusb->uwk_reg_base = args.args[0];
	ssusb->uwk_vers = args.args[1];
	ssusb->uwk = syscon_node_to_regmap(args.np);
	of_node_put(args.np);
	dev_info(ssusb->dev, "uwk - reg:0x%x, version:%d\n",
			ssusb->uwk_reg_base, ssusb->uwk_vers);

	return PTR_ERR_OR_ZERO(ssusb->uwk);
}

void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable)
{
	if (ssusb->uwk_en)
		ssusb_wakeup_ip_sleep_set(ssusb, enable);
}

static void host_ports_num_get(struct ssusb_mtk *ssusb)
{
	u32 xhci_cap;

	xhci_cap = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
	ssusb->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
	ssusb->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);

	dev_dbg(ssusb->dev, "host - u2_ports:%d, u3_ports:%d\n",
		 ssusb->u2_ports, ssusb->u3_ports);
}

/* only configure ports will be used later */
static int ssusb_host_enable(struct ssusb_mtk *ssusb)
{
	void __iomem *ibase = ssusb->ippc_base;
	int num_u3p = ssusb->u3_ports;
	int num_u2p = ssusb->u2_ports;
	int u3_ports_disabled;
	u32 check_clk;
	u32 value;
	int i;

	/* power on host ip */
	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

	/* power on and enable u3 ports except skipped ones */
	u3_ports_disabled = 0;
	for (i = 0; i < num_u3p; i++) {
		if ((0x1 << i) & ssusb->u3p_dis_msk) {
			u3_ports_disabled++;
			continue;
		}

		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
		value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
		value |= SSUSB_U3_PORT_HOST_SEL;
		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
	}

	/* power on and enable all u2 ports */
	for (i = 0; i < num_u2p; i++) {
		if ((0x1 << i) & ssusb->u2p_dis_msk)
			continue;

		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
		value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
		value |= SSUSB_U2_PORT_HOST_SEL;
		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
	}

	check_clk = SSUSB_XHCI_RST_B_STS;
	if (num_u3p > u3_ports_disabled)
		check_clk = SSUSB_U3_MAC_RST_B_STS;

	return ssusb_check_clocks(ssusb, check_clk);
}

static int ssusb_host_disable(struct ssusb_mtk *ssusb)
{
	void __iomem *ibase = ssusb->ippc_base;
	int num_u3p = ssusb->u3_ports;
	int num_u2p = ssusb->u2_ports;
	u32 value;
	int i;

	/* power down and disable u3 ports except skipped ones */
	for (i = 0; i < num_u3p; i++) {
		if ((0x1 << i) & ssusb->u3p_dis_msk)
			continue;

		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
		value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
	}

	/* power down and disable u2 ports except skipped ones */
	for (i = 0; i < num_u2p; i++) {
		if ((0x1 << i) & ssusb->u2p_dis_msk)
			continue;

		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
		value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
	}

	/* power down host ip */
	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

	return 0;
}

int ssusb_host_resume(struct ssusb_mtk *ssusb, bool p0_skipped)
{
	void __iomem *ibase = ssusb->ippc_base;
	int u3p_skip_msk = ssusb->u3p_dis_msk;
	int u2p_skip_msk = ssusb->u2p_dis_msk;
	int num_u3p = ssusb->u3_ports;
	int num_u2p = ssusb->u2_ports;
	u32 value;
	int i;

	if (p0_skipped) {
		u2p_skip_msk |= 0x1;
		if (ssusb->otg_switch.is_u3_drd)
			u3p_skip_msk |= 0x1;
	}

	/* power on host ip */
	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

	/* power on u3 ports except skipped ones */
	for (i = 0; i < num_u3p; i++) {
		if ((0x1 << i) & u3p_skip_msk)
			continue;

		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
		value &= ~SSUSB_U3_PORT_PDN;
		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
	}

	/* power on all u2 ports except skipped ones */
	for (i = 0; i < num_u2p; i++) {
		if ((0x1 << i) & u2p_skip_msk)
			continue;

		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
		value &= ~SSUSB_U2_PORT_PDN;
		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
	}

	return 0;
}

/* here not skip port0 due to PDN can be set repeatedly */
int ssusb_host_suspend(struct ssusb_mtk *ssusb)
{
	void __iomem *ibase = ssusb->ippc_base;
	int num_u3p = ssusb->u3_ports;
	int num_u2p = ssusb->u2_ports;
	u32 value;
	int i;

	/* power down u3 ports except skipped ones */
	for (i = 0; i < num_u3p; i++) {
		if ((0x1 << i) & ssusb->u3p_dis_msk)
			continue;

		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
		value |= SSUSB_U3_PORT_PDN;
		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
	}

	/* power down u2 ports except skipped ones */
	for (i = 0; i < num_u2p; i++) {
		if ((0x1 << i) & ssusb->u2p_dis_msk)
			continue;

		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
		value |= SSUSB_U2_PORT_PDN;
		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
	}

	/* power down host ip */
	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

	return 0;
}

static void ssusb_host_setup(struct ssusb_mtk *ssusb)
{
	host_ports_num_get(ssusb);

	/*
	 * power on host and power on/enable all ports
	 * if support OTG, gadget driver will switch port0 to device mode
	 */
	ssusb_host_enable(ssusb);
	ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);

	/* if port0 supports dual-role, works as host mode by default */
	ssusb_set_vbus(&ssusb->otg_switch, 1);
}

static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
{
	if (ssusb->is_host)
		ssusb_set_vbus(&ssusb->otg_switch, 0);

	ssusb_host_disable(ssusb);
}

/*
 * If host supports multiple ports, the VBUSes(5V) of ports except port0
 * which supports OTG are better to be enabled by default in DTS.
 * Because the host driver will keep link with devices attached when system
 * enters suspend mode, so no need to control VBUSes after initialization.
 */
int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn)
{
	struct device *parent_dev = ssusb->dev;
	int ret;

	ssusb_host_setup(ssusb);

	ret = of_platform_populate(parent_dn, NULL, NULL, parent_dev);
	if (ret) {
		dev_dbg(parent_dev, "failed to create child devices at %pOF\n",
				parent_dn);
		return ret;
	}

	dev_info(parent_dev, "xHCI platform device register success...\n");

	return 0;
}

void ssusb_host_exit(struct ssusb_mtk *ssusb)
{
	of_platform_depopulate(ssusb->dev);
	ssusb_host_cleanup(ssusb);
}