| // SPDX-License-Identifier: GPL-2.0+ |
| /* Microchip Sparx5 Switch Reset driver |
| * |
| * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. |
| * |
| * The Sparx5 Chip Register Model can be browsed at this location: |
| * https://github.com/microchip-ung/sparx-5_reginfo |
| */ |
| #include <linux/mfd/syscon.h> |
| #include <linux/of_device.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/reset-controller.h> |
| |
| struct reset_props { |
| u32 protect_reg; |
| u32 protect_bit; |
| u32 reset_reg; |
| u32 reset_bit; |
| }; |
| |
| struct mchp_reset_context { |
| struct regmap *cpu_ctrl; |
| struct regmap *gcb_ctrl; |
| struct reset_controller_dev rcdev; |
| const struct reset_props *props; |
| }; |
| |
| static struct regmap_config sparx5_reset_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| }; |
| |
| static int sparx5_switch_reset(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| struct mchp_reset_context *ctx = |
| container_of(rcdev, struct mchp_reset_context, rcdev); |
| u32 val; |
| |
| /* Make sure the core is PROTECTED from reset */ |
| regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg, |
| ctx->props->protect_bit, ctx->props->protect_bit); |
| |
| /* Start soft reset */ |
| regmap_write(ctx->gcb_ctrl, ctx->props->reset_reg, |
| ctx->props->reset_bit); |
| |
| /* Wait for soft reset done */ |
| return regmap_read_poll_timeout(ctx->gcb_ctrl, ctx->props->reset_reg, val, |
| (val & ctx->props->reset_bit) == 0, |
| 1, 100); |
| } |
| |
| static const struct reset_control_ops sparx5_reset_ops = { |
| .reset = sparx5_switch_reset, |
| }; |
| |
| static int mchp_sparx5_map_syscon(struct platform_device *pdev, char *name, |
| struct regmap **target) |
| { |
| struct device_node *syscon_np; |
| struct regmap *regmap; |
| int err; |
| |
| syscon_np = of_parse_phandle(pdev->dev.of_node, name, 0); |
| if (!syscon_np) |
| return -ENODEV; |
| regmap = syscon_node_to_regmap(syscon_np); |
| of_node_put(syscon_np); |
| if (IS_ERR(regmap)) { |
| err = PTR_ERR(regmap); |
| dev_err(&pdev->dev, "No '%s' map: %d\n", name, err); |
| return err; |
| } |
| *target = regmap; |
| return 0; |
| } |
| |
| static int mchp_sparx5_map_io(struct platform_device *pdev, int index, |
| struct regmap **target) |
| { |
| struct resource *res; |
| struct regmap *map; |
| void __iomem *mem; |
| |
| mem = devm_platform_get_and_ioremap_resource(pdev, index, &res); |
| if (IS_ERR(mem)) { |
| dev_err(&pdev->dev, "Could not map resource %d\n", index); |
| return PTR_ERR(mem); |
| } |
| sparx5_reset_regmap_config.name = res->name; |
| map = devm_regmap_init_mmio(&pdev->dev, mem, &sparx5_reset_regmap_config); |
| if (IS_ERR(map)) |
| return PTR_ERR(map); |
| *target = map; |
| return 0; |
| } |
| |
| static int mchp_sparx5_reset_probe(struct platform_device *pdev) |
| { |
| struct device_node *dn = pdev->dev.of_node; |
| struct mchp_reset_context *ctx; |
| int err; |
| |
| ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| err = mchp_sparx5_map_syscon(pdev, "cpu-syscon", &ctx->cpu_ctrl); |
| if (err) |
| return err; |
| err = mchp_sparx5_map_io(pdev, 0, &ctx->gcb_ctrl); |
| if (err) |
| return err; |
| |
| ctx->rcdev.owner = THIS_MODULE; |
| ctx->rcdev.nr_resets = 1; |
| ctx->rcdev.ops = &sparx5_reset_ops; |
| ctx->rcdev.of_node = dn; |
| ctx->props = device_get_match_data(&pdev->dev); |
| |
| return devm_reset_controller_register(&pdev->dev, &ctx->rcdev); |
| } |
| |
| static const struct reset_props reset_props_sparx5 = { |
| .protect_reg = 0x84, |
| .protect_bit = BIT(10), |
| .reset_reg = 0x0, |
| .reset_bit = BIT(1), |
| }; |
| |
| static const struct reset_props reset_props_lan966x = { |
| .protect_reg = 0x88, |
| .protect_bit = BIT(5), |
| .reset_reg = 0x0, |
| .reset_bit = BIT(1), |
| }; |
| |
| static const struct of_device_id mchp_sparx5_reset_of_match[] = { |
| { |
| .compatible = "microchip,sparx5-switch-reset", |
| .data = &reset_props_sparx5, |
| }, { |
| .compatible = "microchip,lan966x-switch-reset", |
| .data = &reset_props_lan966x, |
| }, |
| { } |
| }; |
| |
| static struct platform_driver mchp_sparx5_reset_driver = { |
| .probe = mchp_sparx5_reset_probe, |
| .driver = { |
| .name = "sparx5-switch-reset", |
| .of_match_table = mchp_sparx5_reset_of_match, |
| }, |
| }; |
| |
| static int __init mchp_sparx5_reset_init(void) |
| { |
| return platform_driver_register(&mchp_sparx5_reset_driver); |
| } |
| |
| postcore_initcall(mchp_sparx5_reset_init); |
| |
| MODULE_DESCRIPTION("Microchip Sparx5 switch reset driver"); |
| MODULE_AUTHOR("Steen Hegelund <steen.hegelund@microchip.com>"); |
| MODULE_LICENSE("Dual MIT/GPL"); |