| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/eeprom/at25.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: SPI EEPROMs or FRAMs compatible with Atmel's AT25 |
| |
| maintainers: |
| - Christian Eggers <ceggers@arri.de> |
| |
| properties: |
| $nodename: |
| anyOf: |
| - pattern: "^eeprom@[0-9a-f]{1,2}$" |
| - pattern: "^fram@[0-9a-f]{1,2}$" |
| |
| # There are multiple known vendors who manufacture EEPROM chips compatible |
| # with Atmel's AT25. The compatible string requires two items where the |
| # 'vendor' and 'model' parts of the first are the actual chip and the second |
| # item is fixed to "atmel,at25". Some existing bindings only have the |
| # "atmel,at25" part and should be fixed by somebody who knows vendor and |
| # product. |
| compatible: |
| oneOf: |
| - items: |
| - enum: |
| - anvo,anv32e61w |
| - atmel,at25256B |
| - fujitsu,mb85rs1mt |
| - fujitsu,mb85rs64 |
| - microchip,at25160bn |
| - microchip,25lc040 |
| - st,m95m02 |
| - st,m95256 |
| - st,m95640 |
| - cypress,fm25 |
| |
| - const: atmel,at25 |
| |
| # Please don't use this alternative for new bindings. |
| - items: |
| - const: atmel,at25 |
| |
| reg: |
| maxItems: 1 |
| |
| pagesize: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072] |
| description: |
| Size of the eeprom page. FRAMs don't have pages. |
| |
| size: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Total eeprom size in bytes. |
| |
| address-width: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [ 8, 9, 16, 24 ] |
| description: |
| Number of address bits. |
| For 9 bits, the MSB of the address is sent as bit 3 of the instruction |
| byte, before the address byte. |
| |
| spi-cpha: true |
| |
| spi-cpol: true |
| |
| read-only: |
| description: |
| Disable writes to the eeprom. |
| type: boolean |
| |
| wp-gpios: |
| maxItems: 1 |
| description: |
| GPIO to which the write-protect pin of the chip is connected. |
| |
| # Deprecated: at25,byte-len, at25,addr-mode, at25,page-size |
| at25,byte-len: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Total eeprom size in bytes. Deprecated, use "size" property instead. |
| deprecated: true |
| |
| at25,addr-mode: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Addr-mode flags, as defined in include/linux/spi/eeprom.h. |
| Deprecated, use "address-width" property instead. |
| deprecated: true |
| |
| at25,page-size: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| Size of the eeprom page. Deprecated, use "pagesize" property instead. |
| deprecated: true |
| |
| required: |
| - compatible |
| - reg |
| - spi-max-frequency |
| |
| allOf: |
| - $ref: /schemas/spi/spi-peripheral-props.yaml# |
| - $ref: /schemas/nvmem/nvmem.yaml |
| - if: |
| properties: |
| compatible: |
| not: |
| contains: |
| const: cypress,fm25 |
| then: |
| required: |
| - pagesize |
| - size |
| - address-width |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| spi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eeprom@0 { |
| compatible = "st,m95256", "atmel,at25"; |
| reg = <0>; |
| spi-max-frequency = <5000000>; |
| spi-cpha; |
| spi-cpol; |
| wp-gpios = <&gpio1 3 0>; |
| |
| pagesize = <64>; |
| size = <32768>; |
| address-width = <16>; |
| }; |
| |
| fram@1 { |
| compatible = "cypress,fm25", "atmel,at25"; |
| reg = <1>; |
| spi-max-frequency = <40000000>; |
| }; |
| }; |