| ############################################################################# |
| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.txt. |
| # |
| ############################################################################# |
| |
| mainmenu "uClinux/v850 (w/o MMU) Kernel Configuration" |
| |
| config MMU |
| bool |
| default n |
| config ZONE_DMA |
| bool |
| default y |
| config RWSEM_GENERIC_SPINLOCK |
| bool |
| default y |
| config RWSEM_XCHGADD_ALGORITHM |
| bool |
| default n |
| config GENERIC_FIND_NEXT_BIT |
| bool |
| default y |
| config GENERIC_HWEIGHT |
| bool |
| default y |
| config GENERIC_CALIBRATE_DELAY |
| bool |
| default y |
| |
| config GENERIC_HARDIRQS |
| bool |
| default y |
| |
| config GENERIC_IRQ_PROBE |
| bool |
| default y |
| |
| config GENERIC_TIME |
| bool |
| default y |
| |
| config TIME_LOW_RES |
| bool |
| default y |
| |
| config ARCH_HAS_ILOG2_U32 |
| bool |
| default n |
| |
| config ARCH_HAS_ILOG2_U64 |
| bool |
| default n |
| |
| config ARCH_SUPPORTS_AOUT |
| def_bool y |
| |
| # Turn off some random 386 crap that can affect device config |
| config ISA |
| bool |
| default n |
| config ISAPNP |
| bool |
| default n |
| config EISA |
| bool |
| default n |
| config MCA |
| bool |
| default n |
| |
| |
| ############################################################################# |
| #### v850-specific config |
| |
| # Define the architecture |
| config V850 |
| bool |
| default y |
| |
| menu "Processor type and features" |
| |
| choice |
| prompt "Platform" |
| default GDB |
| config V850E_SIM |
| bool "GDB" |
| config RTE_CB_MA1 |
| bool "RTE-V850E/MA1-CB" |
| config RTE_CB_NB85E |
| bool "RTE-V850E/NB85E-CB" |
| config RTE_CB_ME2 |
| bool "RTE-V850E/ME2-CB" |
| config V850E_AS85EP1 |
| bool "AS85EP1" |
| config V850E2_SIM85E2C |
| bool "sim85e2c" |
| config V850E2_SIM85E2S |
| bool "sim85e2s" |
| config V850E2_FPGA85E2C |
| bool "NA85E2C-FPGA" |
| config V850E2_ANNA |
| bool "Anna" |
| endchoice |
| |
| #### V850E processor-specific config |
| |
| # All CPUs currently supported use the v850e architecture |
| config V850E |
| bool |
| default y |
| |
| # The RTE-V850E/MA1-CB is the only type of V850E/MA1 platform we |
| # currently support |
| config V850E_MA1 |
| bool |
| depends on RTE_CB_MA1 |
| default y |
| # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG |
| config V850E_TEG |
| bool |
| depends on RTE_CB_NB85E |
| default y |
| # ... and the RTE-V850E/ME2-CB - V850E/ME2 |
| config V850E_ME2 |
| bool |
| depends on RTE_CB_ME2 |
| default y |
| |
| |
| #### sim85e2-specific config |
| |
| config V850E2_SIM85E2 |
| bool |
| depends on V850E2_SIM85E2C || V850E2_SIM85E2S |
| default y |
| |
| |
| #### V850E2 processor-specific config |
| |
| # V850E2 processors |
| config V850E2 |
| bool |
| depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA |
| default y |
| |
| |
| #### RTE-CB platform-specific config |
| |
| # Boards in the RTE-x-CB series |
| config RTE_CB |
| bool |
| depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2 |
| default y |
| |
| config RTE_CB_MULTI |
| bool |
| # RTE_CB_NB85E can either have multi ROM support or not, but |
| # other platforms (currently only RTE_CB_MA1) require it. |
| prompt "Multi monitor ROM support" if RTE_CB_NB85E |
| depends on RTE_CB_MA1 || RTE_CB_NB85E |
| default y |
| |
| config RTE_CB_MULTI_DBTRAP |
| bool "Pass illegal insn trap / dbtrap to kernel" |
| depends on RTE_CB_MULTI |
| default n |
| |
| config RTE_CB_MA1_KSRAM |
| bool "Kernel in SRAM (limits size of kernel)" |
| depends on RTE_CB_MA1 && RTE_CB_MULTI |
| default n |
| |
| config RTE_MB_A_PCI |
| bool "Mother-A PCI support" |
| depends on RTE_CB |
| default y |
| |
| # The GBUS is used to talk to the RTE-MOTHER-A board |
| config RTE_GBUS_INT |
| bool |
| depends on RTE_MB_A_PCI |
| default y |
| |
| # The only PCI bus we support is on the RTE-MOTHER-A board |
| config PCI |
| bool |
| default RTE_MB_A_PCI |
| |
| #### Some feature-specific configs |
| |
| # Everything except for the GDB simulator uses the same interrupt controller |
| config V850E_INTC |
| bool |
| default !V850E_SIM |
| |
| # Everything except for the various simulators uses the "Timer D" unit |
| config V850E_TIMER_D |
| bool |
| default !V850E_SIM && !V850E2_SIM85E2 |
| |
| # Cache control used on some v850e1 processors |
| config V850E_CACHE |
| bool |
| default V850E_TEG || V850E_ME2 |
| |
| # Cache control used on v850e2 processors; I think this should |
| # actually apply to more, but currently only the SIM85E2S uses it |
| config V850E2_CACHE |
| bool |
| default V850E2_SIM85E2S |
| |
| config NO_CACHE |
| bool |
| default !V850E_CACHE && !V850E2_CACHE |
| |
| #### Misc config |
| |
| config ROM_KERNEL |
| bool "Kernel in ROM" |
| depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2 |
| |
| # Some platforms pre-zero memory, in which case the kernel doesn't need to |
| config ZERO_BSS |
| bool |
| depends on !V850E2_SIM85E2C |
| default y |
| |
| # The crappy-ass zone allocator requires that the start of allocatable |
| # memory be aligned to the largest possible allocation. |
| config FORCE_MAX_ZONEORDER |
| int |
| default 8 if V850E2_SIM85E2C || V850E2_FPGA85E2C |
| |
| config V850E_HIGHRES_TIMER |
| bool "High resolution timer support" |
| depends on V850E_TIMER_D |
| config TIME_BOOTUP |
| bool "Time bootup" |
| depends on V850E_HIGHRES_TIMER |
| |
| config RESET_GUARD |
| bool "Reset Guard" |
| |
| source "mm/Kconfig" |
| |
| endmenu |
| |
| |
| ############################################################################# |
| |
| source init/Kconfig |
| |
| ############################################################################# |
| |
| menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" |
| |
| # config PCI |
| # bool "PCI support" |
| # help |
| # Support for PCI bus. |
| |
| source "drivers/pci/Kconfig" |
| |
| source "drivers/pcmcia/Kconfig" |
| |
| source "drivers/pci/hotplug/Kconfig" |
| |
| endmenu |
| |
| menu "Executable file formats" |
| |
| source "fs/Kconfig.binfmt" |
| |
| endmenu |
| |
| source "net/Kconfig" |
| |
| ############################################################################# |
| |
| source "drivers/base/Kconfig" |
| |
| source drivers/mtd/Kconfig |
| |
| source drivers/parport/Kconfig |
| |
| #source drivers/pnp/Kconfig |
| |
| source drivers/block/Kconfig |
| |
| ############################################################################# |
| |
| menu "Disk device support" |
| |
| source "drivers/ide/Kconfig" |
| |
| source "drivers/scsi/Kconfig" |
| |
| endmenu |
| |
| ############################################################################# |
| |
| |
| source "drivers/md/Kconfig" |
| |
| source "drivers/message/fusion/Kconfig" |
| |
| source "drivers/ieee1394/Kconfig" |
| |
| source "drivers/message/i2o/Kconfig" |
| |
| source "drivers/net/Kconfig" |
| |
| source "drivers/isdn/Kconfig" |
| |
| #source "drivers/telephony/Kconfig" |
| |
| # |
| # input before char - char/joystick depends on it. As does USB. |
| # |
| source "drivers/input/Kconfig" |
| |
| source "drivers/char/Kconfig" |
| |
| #source drivers/misc/Config.in |
| source "drivers/media/Kconfig" |
| |
| source "fs/Kconfig" |
| |
| source "drivers/video/Kconfig" |
| |
| source "sound/Kconfig" |
| |
| source "drivers/usb/Kconfig" |
| |
| source "arch/v850/Kconfig.debug" |
| |
| source "security/Kconfig" |
| |
| source "crypto/Kconfig" |
| |
| source "lib/Kconfig" |
| |
| ############################################################################# |
