| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * misc.c |
| * |
| * This is a collection of several routines from gzip-1.0.3 |
| * adapted for Linux. |
| * |
| * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 |
| * |
| * Modified for ARM Linux by Russell King |
| * |
| * Nicolas Pitre <nico@visuaide.com> 1999/04/14 : |
| * For this code to run directly from Flash, all constant variables must |
| * be marked with 'const' and all other variables initialized at run-time |
| * only. This way all non constant variables will end up in the bss segment, |
| * which should point to addresses in RAM and cleared to 0 on start. |
| * This allows for a much quicker boot time. |
| */ |
| |
| unsigned int __machine_arch_type; |
| |
| #include <linux/compiler.h> /* for inline */ |
| #include <linux/types.h> |
| #include <linux/linkage.h> |
| #include "misc.h" |
| #ifdef CONFIG_ARCH_EP93XX |
| #include "misc-ep93xx.h" |
| #endif |
| |
| static void putstr(const char *ptr); |
| |
| #include CONFIG_UNCOMPRESS_INCLUDE |
| |
| #ifdef CONFIG_DEBUG_ICEDCC |
| |
| #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) |
| |
| static void icedcc_putc(int ch) |
| { |
| int status, i = 0x4000000; |
| |
| do { |
| if (--i < 0) |
| return; |
| |
| asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status)); |
| } while (status & (1 << 29)); |
| |
| asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch)); |
| } |
| |
| |
| #elif defined(CONFIG_CPU_XSCALE) |
| |
| static void icedcc_putc(int ch) |
| { |
| int status, i = 0x4000000; |
| |
| do { |
| if (--i < 0) |
| return; |
| |
| asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status)); |
| } while (status & (1 << 28)); |
| |
| asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch)); |
| } |
| |
| #else |
| |
| static void icedcc_putc(int ch) |
| { |
| int status, i = 0x4000000; |
| |
| do { |
| if (--i < 0) |
| return; |
| |
| asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status)); |
| } while (status & 2); |
| |
| asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch)); |
| } |
| |
| #endif |
| |
| #define putc(ch) icedcc_putc(ch) |
| #endif |
| |
| static void putstr(const char *ptr) |
| { |
| char c; |
| |
| while ((c = *ptr++) != '\0') { |
| if (c == '\n') |
| putc('\r'); |
| putc(c); |
| } |
| |
| flush(); |
| } |
| |
| /* |
| * gzip declarations |
| */ |
| unsigned char *output_data; |
| |
| unsigned long free_mem_ptr; |
| unsigned long free_mem_end_ptr; |
| |
| #ifndef arch_error |
| #define arch_error(x) |
| #endif |
| |
| void error(char *x) |
| { |
| arch_error(x); |
| |
| putstr("\n\n"); |
| putstr(x); |
| putstr("\n\n -- System halted"); |
| |
| while(1); /* Halt */ |
| } |
| |
| asmlinkage void __div0(void) |
| { |
| error("Attempting division by 0!"); |
| } |
| |
| void |
| decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, |
| unsigned long free_mem_ptr_end_p, |
| int arch_id) |
| { |
| int ret; |
| |
| output_data = (unsigned char *)output_start; |
| free_mem_ptr = free_mem_ptr_p; |
| free_mem_end_ptr = free_mem_ptr_end_p; |
| __machine_arch_type = arch_id; |
| |
| #ifdef CONFIG_ARCH_EP93XX |
| ep93xx_decomp_setup(); |
| #endif |
| arch_decomp_setup(); |
| |
| putstr("Uncompressing Linux..."); |
| ret = do_decompress(input_data, input_data_end - input_data, |
| output_data, error); |
| if (ret) |
| error("decompressor returned an error"); |
| else |
| putstr(" done, booting the kernel.\n"); |
| } |
| |
| void __fortify_panic(const u8 reason, size_t avail, size_t size) |
| { |
| error("detected buffer overflow"); |
| } |