blob: 31cdca3e623cde58da4a64292ec4fdb55e484580 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the RZN1D-DB Board
*
* Copyright (C) 2018 Renesas Electronics Europe Limited
*
*/
/dts-v1/;
#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
#include <dt-bindings/net/pcs-rzn1-miic.h>
#include "r9a06g032.dtsi"
/ {
model = "RZN1D-DB Board";
compatible = "renesas,rzn1d400-db", "renesas,r9a06g032";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
serial0 = &uart0;
};
};
&can0 {
pinctrl-0 = <&pins_can0>;
pinctrl-names = "default";
/* Assuming CN10/CN11 are wired for CAN1 */
status = "okay";
};
&can1 {
pinctrl-0 = <&pins_can1>;
pinctrl-names = "default";
/* Please only enable can0 or can1, depending on CN10/CN11 */
/* status = "okay"; */
};
&eth_miic {
status = "okay";
renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
};
&gmac2 {
status = "okay";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&mii_conv4 {
renesas,miic-input = <MIIC_SWITCH_PORTB>;
status = "okay";
};
&mii_conv5 {
renesas,miic-input = <MIIC_SWITCH_PORTA>;
status = "okay";
};
&pinctrl {
pins_can0: pins_can0 {
pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>, /* CAN0_TXD */
<RZN1_PINMUX(163, RZN1_FUNC_CAN)>; /* CAN0_RXD */
drive-strength = <6>;
};
pins_can1: pins_can1 {
pinmux = <RZN1_PINMUX(109, RZN1_FUNC_CAN)>, /* CAN1_TXD */
<RZN1_PINMUX(110, RZN1_FUNC_CAN)>; /* CAN1_RXD */
drive-strength = <6>;
};
pins_eth3: pins_eth3 {
pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
drive-strength = <6>;
bias-disable;
};
pins_eth4: pins_eth4 {
pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
<RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
drive-strength = <6>;
bias-disable;
};
pins_mdio1: pins_mdio1 {
pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
<RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
};
};
&rtc0 {
status = "okay";
};
&switch {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
dsa,member = <0 0>;
mdio {
clock-frequency = <2500000>;
#address-cells = <1>;
#size-cells = <0>;
switch0phy4: ethernet-phy@4 {
reg = <4>;
micrel,led-mode = <1>;
};
switch0phy5: ethernet-phy@5 {
reg = <5>;
micrel,led-mode = <1>;
};
};
};
&switch_port0 {
label = "lan0";
phy-mode = "mii";
phy-handle = <&switch0phy5>;
status = "okay";
};
&switch_port1 {
label = "lan1";
phy-mode = "mii";
phy-handle = <&switch0phy4>;
status = "okay";
};
&switch_port4 {
status = "okay";
};
&uart0 {
status = "okay";
};
&wdt0 {
timeout-sec = <60>;
status = "okay";
};