blob: d1120f5f2c0153bbc9b967dd360159b6c6ee50e1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Original all-in-one devicetree:
* Copyright (C) 2020-2022 - Aldec
* Rewritten to use includes:
* Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
*/
/dts-v1/;
#include "mpfs.dtsi"
#include "mpfs-tysom-m-fabric.dtsi"
/ {
model = "Aldec TySOM-M-MPFS250T-REV2";
compatible = "aldec,tysom-m-mpfs250t-rev2", "microchip,mpfs";
aliases {
ethernet0 = &mac0;
ethernet1 = &mac1;
serial0 = &mmuart0;
serial1 = &mmuart1;
serial2 = &mmuart2;
serial3 = &mmuart3;
serial4 = &mmuart4;
gpio0 = &gpio0;
gpio1 = &gpio2;
};
chosen {
stdout-path = "serial1:115200n8";
};
ddrc_cache_lo: memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x30000000>;
status = "okay";
};
ddrc_cache_hi: memory@1000000000 {
device_type = "memory";
reg = <0x10 0x00000000 0x0 0x40000000>;
status = "okay";
};
leds {
compatible = "gpio-leds";
status = "okay";
led0 {
gpios = <&gpio1 23 1>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
hwmon: hwmon@45 {
status = "okay";
compatible = "ti,ina219";
reg = <0x45>;
shunt-resistor = <2000>;
};
};
&gpio1 {
interrupts = <27>, <28>, <29>, <30>,
<31>, <32>, <33>, <47>,
<35>, <36>, <37>, <38>,
<39>, <40>, <41>, <42>,
<43>, <44>, <45>, <46>,
<47>, <48>, <49>, <50>;
status = "okay";
};
&mac0 {
status = "okay";
phy-mode = "gmii";
phy-handle = <&phy0>;
};
&mac1 {
status = "okay";
phy-mode = "gmii";
phy-handle = <&phy1>;
phy1: ethernet-phy@1 {
reg = <1>;
};
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&mbox {
status = "okay";
};
&mmc {
max-frequency = <200000000>;
cap-mmc-highspeed;
cap-sd-highspeed;
no-1-8-v;
disable-wp;
status = "okay";
};
&mmuart1 {
status = "okay";
};
&mmuart2 {
status = "okay";
};
&mmuart3 {
status = "okay";
};
&mmuart4 {
status = "okay";
};
&refclk {
clock-frequency = <125000000>;
};
&rtc {
status = "okay";
};
&spi0 {
status = "okay";
};
&spi1 {
status = "okay";
flash@0 {
compatible = "micron,n25q128a11", "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <10000000>;
};
};
&syscontroller {
status = "okay";
};
&usb {
status = "okay";
dr_mode = "host";
};