| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * LED driver for PCA995x I2C LED drivers |
| * |
| * Copyright 2011 bct electronic GmbH |
| * Copyright 2013 Qtechnology/AS |
| * Copyright 2022 NXP |
| * Copyright 2023 Marek Vasut |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| |
| /* Register definition */ |
| #define PCA995X_MODE1 0x00 |
| #define PCA995X_MODE2 0x01 |
| #define PCA995X_LEDOUT0 0x02 |
| #define PCA9955B_PWM0 0x08 |
| #define PCA9952_PWM0 0x0A |
| #define PCA9952_IREFALL 0x43 |
| #define PCA9955B_IREFALL 0x45 |
| |
| /* Auto-increment disabled. Normal mode */ |
| #define PCA995X_MODE1_CFG 0x00 |
| |
| /* LED select registers determine the source that drives LED outputs */ |
| #define PCA995X_LED_OFF 0x0 |
| #define PCA995X_LED_ON 0x1 |
| #define PCA995X_LED_PWM_MODE 0x2 |
| #define PCA995X_LDRX_MASK 0x3 |
| #define PCA995X_LDRX_BITS 2 |
| |
| #define PCA995X_MAX_OUTPUTS 16 |
| #define PCA995X_OUTPUTS_PER_REG 4 |
| |
| #define PCA995X_IREFALL_FULL_CFG 0xFF |
| #define PCA995X_IREFALL_HALF_CFG (PCA995X_IREFALL_FULL_CFG / 2) |
| |
| #define PCA995X_TYPE_NON_B 0 |
| #define PCA995X_TYPE_B 1 |
| |
| #define ldev_to_led(c) container_of(c, struct pca995x_led, ldev) |
| |
| struct pca995x_led { |
| unsigned int led_no; |
| struct led_classdev ldev; |
| struct pca995x_chip *chip; |
| }; |
| |
| struct pca995x_chip { |
| struct regmap *regmap; |
| struct pca995x_led leds[PCA995X_MAX_OUTPUTS]; |
| int btype; |
| }; |
| |
| static int pca995x_brightness_set(struct led_classdev *led_cdev, |
| enum led_brightness brightness) |
| { |
| struct pca995x_led *led = ldev_to_led(led_cdev); |
| struct pca995x_chip *chip = led->chip; |
| u8 ledout_addr, pwmout_addr; |
| int shift, ret; |
| |
| pwmout_addr = (chip->btype ? PCA9955B_PWM0 : PCA9952_PWM0) + led->led_no; |
| ledout_addr = PCA995X_LEDOUT0 + (led->led_no / PCA995X_OUTPUTS_PER_REG); |
| shift = PCA995X_LDRX_BITS * (led->led_no % PCA995X_OUTPUTS_PER_REG); |
| |
| switch (brightness) { |
| case LED_FULL: |
| return regmap_update_bits(chip->regmap, ledout_addr, |
| PCA995X_LDRX_MASK << shift, |
| PCA995X_LED_ON << shift); |
| case LED_OFF: |
| return regmap_update_bits(chip->regmap, ledout_addr, |
| PCA995X_LDRX_MASK << shift, 0); |
| default: |
| /* Adjust brightness as per user input by changing individual PWM */ |
| ret = regmap_write(chip->regmap, pwmout_addr, brightness); |
| if (ret) |
| return ret; |
| |
| /* |
| * Change LDRx configuration to individual brightness via PWM. |
| * LED will stop blinking if it's doing so. |
| */ |
| return regmap_update_bits(chip->regmap, ledout_addr, |
| PCA995X_LDRX_MASK << shift, |
| PCA995X_LED_PWM_MODE << shift); |
| } |
| } |
| |
| static const struct regmap_config pca995x_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x49, |
| }; |
| |
| static int pca995x_probe(struct i2c_client *client) |
| { |
| struct fwnode_handle *led_fwnodes[PCA995X_MAX_OUTPUTS] = { 0 }; |
| struct fwnode_handle *np, *child; |
| struct device *dev = &client->dev; |
| struct pca995x_chip *chip; |
| struct pca995x_led *led; |
| int i, btype, reg, ret; |
| |
| btype = (unsigned long)device_get_match_data(&client->dev); |
| |
| np = dev_fwnode(dev); |
| if (!np) |
| return -ENODEV; |
| |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->btype = btype; |
| chip->regmap = devm_regmap_init_i2c(client, &pca995x_regmap); |
| if (IS_ERR(chip->regmap)) |
| return PTR_ERR(chip->regmap); |
| |
| i2c_set_clientdata(client, chip); |
| |
| fwnode_for_each_available_child_node(np, child) { |
| ret = fwnode_property_read_u32(child, "reg", ®); |
| if (ret) { |
| fwnode_handle_put(child); |
| return ret; |
| } |
| |
| if (reg < 0 || reg >= PCA995X_MAX_OUTPUTS || led_fwnodes[reg]) { |
| fwnode_handle_put(child); |
| return -EINVAL; |
| } |
| |
| led = &chip->leds[reg]; |
| led_fwnodes[reg] = child; |
| led->chip = chip; |
| led->led_no = reg; |
| led->ldev.brightness_set_blocking = pca995x_brightness_set; |
| led->ldev.max_brightness = 255; |
| } |
| |
| for (i = 0; i < PCA995X_MAX_OUTPUTS; i++) { |
| struct led_init_data init_data = {}; |
| |
| if (!led_fwnodes[i]) |
| continue; |
| |
| init_data.fwnode = led_fwnodes[i]; |
| |
| ret = devm_led_classdev_register_ext(dev, |
| &chip->leds[i].ldev, |
| &init_data); |
| if (ret < 0) { |
| fwnode_handle_put(child); |
| return dev_err_probe(dev, ret, |
| "Could not register LED %s\n", |
| chip->leds[i].ldev.name); |
| } |
| } |
| |
| /* Disable LED all-call address and set normal mode */ |
| ret = regmap_write(chip->regmap, PCA995X_MODE1, PCA995X_MODE1_CFG); |
| if (ret) |
| return ret; |
| |
| /* IREF Output current value for all LEDn outputs */ |
| return regmap_write(chip->regmap, |
| btype ? PCA9955B_IREFALL : PCA9952_IREFALL, |
| PCA995X_IREFALL_HALF_CFG); |
| } |
| |
| static const struct i2c_device_id pca995x_id[] = { |
| { "pca9952", .driver_data = (kernel_ulong_t)PCA995X_TYPE_NON_B }, |
| { "pca9955b", .driver_data = (kernel_ulong_t)PCA995X_TYPE_B }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, pca995x_id); |
| |
| static const struct of_device_id pca995x_of_match[] = { |
| { .compatible = "nxp,pca9952", .data = (void *)PCA995X_TYPE_NON_B }, |
| { .compatible = "nxp,pca9955b", .data = (void *)PCA995X_TYPE_B }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, pca995x_of_match); |
| |
| static struct i2c_driver pca995x_driver = { |
| .driver = { |
| .name = "leds-pca995x", |
| .of_match_table = pca995x_of_match, |
| }, |
| .probe = pca995x_probe, |
| .id_table = pca995x_id, |
| }; |
| module_i2c_driver(pca995x_driver); |
| |
| MODULE_AUTHOR("Isai Gaspar <isaiezequiel.gaspar@nxp.com>"); |
| MODULE_DESCRIPTION("PCA995x LED driver"); |
| MODULE_LICENSE("GPL"); |