Google Git
Sign in
android-kvm / linux / b136f68eb00d898e8f5549d86cc87e8a9e4185f2 / . / drivers / net / phy / phy-c45.c
blob: 5695935fdce97ea6a6fa8b8798a2fbe475b7fd0d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Clause 45 PHY support
*/
#include <linux/ethtool.h>
#include <linux/export.h>
#include <linux/mdio.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include "mdio-open-alliance.h"
/**
* genphy_c45_baset1_able - checks if the PMA has BASE-T1 extended abilities
* @phydev: target phy_device struct
*/
static bool genphy_c45_baset1_able(struct phy_device *phydev)
{
int val;
if (phydev->pma_extable == -ENODATA) {
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
if (val < 0)
return false;
phydev->pma_extable = val;
}
return !!(phydev->pma_extable & MDIO_PMA_EXTABLE_BT1);
}
/**
* genphy_c45_pma_can_sleep - checks if the PMA have sleep support
* @phydev: target phy_device struct
*/
static bool genphy_c45_pma_can_sleep(struct phy_device *phydev)
{
int stat1;
stat1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1);
if (stat1 < 0)
return false;
return !!(stat1 & MDIO_STAT1_LPOWERABLE);
}
/**
* genphy_c45_pma_resume - wakes up the PMA module
* @phydev: target phy_device struct
*/
int genphy_c45_pma_resume(struct phy_device *phydev)
{
if (!genphy_c45_pma_can_sleep(phydev))
return -EOPNOTSUPP;
return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
MDIO_CTRL1_LPOWER);
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_resume);
/**
* genphy_c45_pma_suspend - suspends the PMA module
* @phydev: target phy_device struct
*/
int genphy_c45_pma_suspend(struct phy_device *phydev)
{
if (!genphy_c45_pma_can_sleep(phydev))
return -EOPNOTSUPP;
return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
MDIO_CTRL1_LPOWER);
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_suspend);
/**
* genphy_c45_pma_baset1_setup_master_slave - configures forced master/slave
* role of BaseT1 devices.
* @phydev: target phy_device struct
*/
int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev)
{
int ctl = 0;
switch (phydev->master_slave_set) {
case MASTER_SLAVE_CFG_MASTER_PREFERRED:
case MASTER_SLAVE_CFG_MASTER_FORCE:
ctl = MDIO_PMA_PMD_BT1_CTRL_CFG_MST;
break;
case MASTER_SLAVE_CFG_SLAVE_FORCE:
case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
break;
case MASTER_SLAVE_CFG_UNKNOWN:
case MASTER_SLAVE_CFG_UNSUPPORTED:
return 0;
default:
phydev_warn(phydev, "Unsupported Master/Slave mode\n");
return -EOPNOTSUPP;
}
return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL,
MDIO_PMA_PMD_BT1_CTRL_CFG_MST, ctl);
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_setup_master_slave);
/**
* genphy_c45_pma_setup_forced - configures a forced speed
* @phydev: target phy_device struct
*/
int genphy_c45_pma_setup_forced(struct phy_device *phydev)
{
int bt1_ctrl, ctrl1, ctrl2, ret;
/* Half duplex is not supported */
if (phydev->duplex != DUPLEX_FULL)
return -EINVAL;
ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
if (ctrl1 < 0)
return ctrl1;
ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2);
if (ctrl2 < 0)
return ctrl2;
ctrl1 &= ~MDIO_CTRL1_SPEEDSEL;
/*
* PMA/PMD type selection is 1.7.5:0 not 1.7.3:0. See 45.2.1.6.1
* in 802.3-2012 and 802.3-2015.
*/
ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30);
switch (phydev->speed) {
case SPEED_10:
if (genphy_c45_baset1_able(phydev))
ctrl2 |= MDIO_PMA_CTRL2_BASET1;
else
ctrl2 |= MDIO_PMA_CTRL2_10BT;
break;
case SPEED_100:
ctrl1 |= MDIO_PMA_CTRL1_SPEED100;
ctrl2 |= MDIO_PMA_CTRL2_100BTX;
break;
case SPEED_1000:
ctrl1 |= MDIO_PMA_CTRL1_SPEED1000;
/* Assume 1000base-T */
ctrl2 |= MDIO_PMA_CTRL2_1000BT;
break;
case SPEED_2500:
ctrl1 |= MDIO_CTRL1_SPEED2_5G;
/* Assume 2.5Gbase-T */
ctrl2 |= MDIO_PMA_CTRL2_2_5GBT;
break;
case SPEED_5000:
ctrl1 |= MDIO_CTRL1_SPEED5G;
/* Assume 5Gbase-T */
ctrl2 |= MDIO_PMA_CTRL2_5GBT;
break;
case SPEED_10000:
ctrl1 |= MDIO_CTRL1_SPEED10G;
/* Assume 10Gbase-T */
ctrl2 |= MDIO_PMA_CTRL2_10GBT;
break;
default:
return -EINVAL;
}
ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1);
if (ret < 0)
return ret;
ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2);
if (ret < 0)
return ret;
if (genphy_c45_baset1_able(phydev)) {
ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
if (ret < 0)
return ret;
bt1_ctrl = 0;
if (phydev->speed == SPEED_1000)
bt1_ctrl = MDIO_PMA_PMD_BT1_CTRL_STRAP_B1000;
ret = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL,
MDIO_PMA_PMD_BT1_CTRL_STRAP, bt1_ctrl);
if (ret < 0)
return ret;
}
return genphy_c45_an_disable_aneg(phydev);
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
/* Sets master/slave preference and supported technologies.
* The preference is set in the BIT(4) of BASE-T1 AN
* advertisement register 7.515 and whether the status
* is forced or not, it is set in the BIT(12) of BASE-T1
* AN advertisement register 7.514.
* Sets 10BASE-T1L Ability BIT(14) in BASE-T1 autonegotiation
* advertisement register [31:16] if supported.
*/
static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
{
u16 adv_l_mask, adv_l = 0;
u16 adv_m_mask, adv_m = 0;
int changed = 0;
int ret;
adv_l_mask = MDIO_AN_T1_ADV_L_FORCE_MS | MDIO_AN_T1_ADV_L_PAUSE_CAP |
MDIO_AN_T1_ADV_L_PAUSE_ASYM;
adv_m_mask = MDIO_AN_T1_ADV_M_1000BT1 | MDIO_AN_T1_ADV_M_100BT1 |
MDIO_AN_T1_ADV_M_MST | MDIO_AN_T1_ADV_M_B10L;
switch (phydev->master_slave_set) {
case MASTER_SLAVE_CFG_MASTER_FORCE:
adv_m |= MDIO_AN_T1_ADV_M_MST;
fallthrough;
case MASTER_SLAVE_CFG_SLAVE_FORCE:
adv_l |= MDIO_AN_T1_ADV_L_FORCE_MS;
break;
case MASTER_SLAVE_CFG_MASTER_PREFERRED:
adv_m |= MDIO_AN_T1_ADV_M_MST;
fallthrough;
case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
break;
case MASTER_SLAVE_CFG_UNKNOWN:
case MASTER_SLAVE_CFG_UNSUPPORTED:
/* if master/slave role is not specified, do not overwrite it */
adv_l_mask &= ~MDIO_AN_T1_ADV_L_FORCE_MS;
adv_m_mask &= ~MDIO_AN_T1_ADV_M_MST;
break;
default:
phydev_warn(phydev, "Unsupported Master/Slave mode\n");
return -EOPNOTSUPP;
}
adv_l |= linkmode_adv_to_mii_t1_adv_l_t(phydev->advertising);
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L,
adv_l_mask, adv_l);
if (ret < 0)
return ret;
if (ret > 0)
changed = 1;
adv_m |= linkmode_adv_to_mii_t1_adv_m_t(phydev->advertising);
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M,
adv_m_mask, adv_m);
if (ret < 0)
return ret;
if (ret > 0)
changed = 1;
return changed;
}
/**
* genphy_c45_an_config_aneg - configure advertisement registers
* @phydev: target phy_device struct
*
* Configure advertisement registers based on modes set in phydev->advertising
*
* Returns negative errno code on failure, 0 if advertisement didn't change,
* or 1 if advertised modes changed.
*/
int genphy_c45_an_config_aneg(struct phy_device *phydev)
{
int changed = 0, ret;
u32 adv;
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
ret = genphy_c45_an_config_eee_aneg(phydev);
if (ret < 0)
return ret;
else if (ret)
changed = true;
if (genphy_c45_baset1_able(phydev))
return genphy_c45_baset1_an_config_aneg(phydev);
adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_100BASE4 |
ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
adv);
if (ret < 0)
return ret;
if (ret > 0)
changed = 1;
adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising);
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
MDIO_AN_10GBT_CTRL_ADV10G |
MDIO_AN_10GBT_CTRL_ADV5G |
MDIO_AN_10GBT_CTRL_ADV2_5G, adv);
if (ret < 0)
return ret;
if (ret > 0)
changed = 1;
return changed;
}
EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg);
/**
* genphy_c45_an_disable_aneg - disable auto-negotiation
* @phydev: target phy_device struct
*
* Disable auto-negotiation in the Clause 45 PHY. The link parameters
* are controlled through the PMA/PMD MMD registers.
*
* Returns zero on success, negative errno code on failure.
*/
int genphy_c45_an_disable_aneg(struct phy_device *phydev)
{
u16 reg = MDIO_CTRL1;
if (genphy_c45_baset1_able(phydev))
reg = MDIO_AN_T1_CTRL;
return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
/**
* genphy_c45_restart_aneg - Enable and restart auto-negotiation
* @phydev: target phy_device struct
*
* This assumes that the auto-negotiation MMD is present.
*
* Enable and restart auto-negotiation.
*/
int genphy_c45_restart_aneg(struct phy_device *phydev)
{
u16 reg = MDIO_CTRL1;
if (genphy_c45_baset1_able(phydev))
reg = MDIO_AN_T1_CTRL;
return phy_set_bits_mmd(phydev, MDIO_MMD_AN, reg,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
/**
* genphy_c45_check_and_restart_aneg - Enable and restart auto-negotiation
* @phydev: target phy_device struct
* @restart: whether aneg restart is requested
*
* This assumes that the auto-negotiation MMD is present.
*
* Check, and restart auto-negotiation if needed.
*/
int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
{
u16 reg = MDIO_CTRL1;
int ret;
if (genphy_c45_baset1_able(phydev))
reg = MDIO_AN_T1_CTRL;
if (!restart) {
/* Configure and restart aneg if it wasn't set before */
ret = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
if (ret < 0)
return ret;
if (!(ret & MDIO_AN_CTRL1_ENABLE))
restart = true;
}
if (restart)
return genphy_c45_restart_aneg(phydev);
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
/**
* genphy_c45_aneg_done - return auto-negotiation complete status
* @phydev: target phy_device struct
*
* This assumes that the auto-negotiation MMD is present.
*
* Reads the status register from the auto-negotiation MMD, returning:
* - positive if auto-negotiation is complete
* - negative errno code on error
* - zero otherwise
*/
int genphy_c45_aneg_done(struct phy_device *phydev)
{
int reg = MDIO_STAT1;
int val;
if (genphy_c45_baset1_able(phydev))
reg = MDIO_AN_T1_STAT;
val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_aneg_done);
/**
* genphy_c45_read_link - read the overall link status from the MMDs
* @phydev: target phy_device struct
*
* Read the link status from the specified MMDs, and if they all indicate
* that the link is up, set phydev->link to 1. If an error is encountered,
* a negative errno will be returned, otherwise zero.
*/
int genphy_c45_read_link(struct phy_device *phydev)
{
u32 mmd_mask = MDIO_DEVS_PMAPMD;
int val, devad;
bool link = true;
if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) {
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
if (val < 0)
return val;
/* Autoneg is being started, therefore disregard current
* link status and report link as down.
*/
if (val & MDIO_AN_CTRL1_RESTART) {
phydev->link = 0;
return 0;
}
}
while (mmd_mask && link) {
devad = __ffs(mmd_mask);
mmd_mask &= ~BIT(devad);
/* The link state is latched low so that momentary link
* drops can be detected. Do not double-read the status
* in polling mode to detect such short link drops except
* the link was already down.
*/
if (!phy_polling_mode(phydev) || !phydev->link) {
val = phy_read_mmd(phydev, devad, MDIO_STAT1);
if (val < 0)
return val;
else if (val & MDIO_STAT1_LSTATUS)
continue;
}
val = phy_read_mmd(phydev, devad, MDIO_STAT1);
if (val < 0)
return val;
if (!(val & MDIO_STAT1_LSTATUS))
link = false;
}
phydev->link = link;
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_link);
/* Read the Clause 45 defined BASE-T1 AN (7.513) status register to check
* if autoneg is complete. If so read the BASE-T1 Autonegotiation
* Advertisement registers filling in the link partner advertisement,
* pause and asym_pause members in phydev.
*/
static int genphy_c45_baset1_read_lpa(struct phy_device *phydev)
{
int val;
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT);
if (val < 0)
return val;
if (!(val & MDIO_AN_STAT1_COMPLETE)) {
linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising);
mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, 0);
mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, 0);
phydev->pause = 0;
phydev->asym_pause = 0;
return 0;
}
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising, 1);
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_L);
if (val < 0)
return val;
mii_t1_adv_l_mod_linkmode_t(phydev->lp_advertising, val);
phydev->pause = val & MDIO_AN_T1_ADV_L_PAUSE_CAP ? 1 : 0;
phydev->asym_pause = val & MDIO_AN_T1_ADV_L_PAUSE_ASYM ? 1 : 0;
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_LP_M);
if (val < 0)
return val;
mii_t1_adv_m_mod_linkmode_t(phydev->lp_advertising, val);
return 0;
}
/**
* genphy_c45_read_lpa - read the link partner advertisement and pause
* @phydev: target phy_device struct
*
* Read the Clause 45 defined base (7.19) and 10G (7.33) status registers,
* filling in the link partner advertisement, pause and asym_pause members
* in @phydev. This assumes that the auto-negotiation MMD is present, and
* the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected
* to fill in the remainder of the link partner advert from vendor registers.
*/
int genphy_c45_read_lpa(struct phy_device *phydev)
{
int val;
if (genphy_c45_baset1_able(phydev))
return genphy_c45_baset1_read_lpa(phydev);
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (val < 0)
return val;
if (!(val & MDIO_AN_STAT1_COMPLETE)) {
linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
phydev->lp_advertising);
mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, 0);
phydev->pause = 0;
phydev->asym_pause = 0;
return 0;
}
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising,
val & MDIO_AN_STAT1_LPABLE);
/* Read the link partner's base page advertisement */
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA);
if (val < 0)
return val;
mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, val);
phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0;
phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0;
/* Read the link partner's 10G advertisement */
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
if (val < 0)
return val;
mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, val);
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_lpa);
/**
* genphy_c45_pma_baset1_read_master_slave - read forced master/slave
* configuration
* @phydev: target phy_device struct
*/
int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev)
{
int val;
phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL);
if (val < 0)
return val;
if (val & MDIO_PMA_PMD_BT1_CTRL_CFG_MST) {
phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
} else {
phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_read_master_slave);
/**
* genphy_c45_read_pma - read link speed etc from PMA
* @phydev: target phy_device struct
*/
int genphy_c45_read_pma(struct phy_device *phydev)
{
int val;
linkmode_zero(phydev->lp_advertising);
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
if (val < 0)
return val;
switch (val & MDIO_CTRL1_SPEEDSEL) {
case 0:
phydev->speed = SPEED_10;
break;
case MDIO_PMA_CTRL1_SPEED100:
phydev->speed = SPEED_100;
break;
case MDIO_PMA_CTRL1_SPEED1000:
phydev->speed = SPEED_1000;
break;
case MDIO_CTRL1_SPEED2_5G:
phydev->speed = SPEED_2500;
break;
case MDIO_CTRL1_SPEED5G:
phydev->speed = SPEED_5000;
break;
case MDIO_CTRL1_SPEED10G:
phydev->speed = SPEED_10000;
break;
default:
phydev->speed = SPEED_UNKNOWN;
break;
}
phydev->duplex = DUPLEX_FULL;
if (genphy_c45_baset1_able(phydev)) {
val = genphy_c45_pma_baset1_read_master_slave(phydev);
if (val < 0)
return val;
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
/**
* genphy_c45_read_mdix - read mdix status from PMA
* @phydev: target phy_device struct
*/
int genphy_c45_read_mdix(struct phy_device *phydev)
{
int val;
if (phydev->speed == SPEED_10000) {
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
MDIO_PMA_10GBT_SWAPPOL);
if (val < 0)
return val;
switch (val) {
case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
phydev->mdix = ETH_TP_MDI;
break;
case 0:
phydev->mdix = ETH_TP_MDI_X;
break;
default:
phydev->mdix = ETH_TP_MDI_INVALID;
break;
}
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
/**
* genphy_c45_write_eee_adv - write advertised EEE link modes
* @phydev: target phy_device struct
* @adv: the linkmode advertisement settings
*/
int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv)
{
int val, changed = 0;
if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP1_FEATURES)) {
val = linkmode_to_mii_eee_cap1_t(adv);
/* In eee_broken_modes are stored MDIO_AN_EEE_ADV specific raw
* register values.
*/
val &= ~phydev->eee_broken_modes;
/* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1
* (Register 7.60)
*/
val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
MDIO_AN_EEE_ADV,
MDIO_EEE_100TX | MDIO_EEE_1000T |
MDIO_EEE_10GT | MDIO_EEE_1000KX |
MDIO_EEE_10GKX4 | MDIO_EEE_10GKR,
val);
if (val < 0)
return val;
if (val > 0)
changed = 1;
}
if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
val = linkmode_to_mii_eee_cap2_t(adv);
/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
* (Register 7.62)
*/
val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
MDIO_AN_EEE_ADV2,
MDIO_EEE_2_5GT | MDIO_EEE_5GT,
val);
if (val < 0)
return val;
if (val > 0)
changed = 1;
}
if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported_eee)) {
val = linkmode_adv_to_mii_10base_t1_t(adv);
/* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register
* (Register 7.526)
*/
val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
MDIO_AN_10BT1_AN_CTRL,
MDIO_AN_10BT1_AN_CTRL_ADV_EEE_T1L,
val);
if (val < 0)
return val;
if (val > 0)
changed = 1;
}
return changed;
}
/**
* genphy_c45_read_eee_adv - read advertised EEE link modes
* @phydev: target phy_device struct
* @adv: the linkmode advertisement status
*/
int genphy_c45_read_eee_adv(struct phy_device *phydev, unsigned long *adv)
{
int val;
if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP1_FEATURES)) {
/* IEEE 802.3-2018 45.2.7.13 EEE advertisement 1
* (Register 7.60)
*/
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
if (val < 0)
return val;
mii_eee_cap1_mod_linkmode_t(adv, val);
}
if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
/* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
* (Register 7.62)
*/
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2);
if (val < 0)
return val;
mii_eee_cap2_mod_linkmode_adv_t(adv, val);
}
if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported_eee)) {
/* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register
* (Register 7.526)
*/
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10BT1_AN_CTRL);
if (val < 0)
return val;
mii_10base_t1_adv_mod_linkmode_t(adv, val);
}
return 0;
}
/**
* genphy_c45_read_eee_lpa - read advertised LP EEE link modes
* @phydev: target phy_device struct
* @lpa: the linkmode LP advertisement status
*/
static int genphy_c45_read_eee_lpa(struct phy_device *phydev,
unsigned long *lpa)
{
int val;
if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP1_FEATURES)) {
/* IEEE 802.3-2018 45.2.7.14 EEE link partner ability 1
* (Register 7.61)
*/
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
if (val < 0)
return val;
mii_eee_cap1_mod_linkmode_t(lpa, val);
}
if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
/* IEEE 802.3-2022 45.2.7.17 EEE link partner ability 2
* (Register 7.63)
*/
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE2);
if (val < 0)
return val;
mii_eee_cap2_mod_linkmode_adv_t(lpa, val);
}
if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported_eee)) {
/* IEEE 802.3cg-2019 45.2.7.26 10BASE-T1 AN status register
* (Register 7.527)
*/
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10BT1_AN_STAT);
if (val < 0)
return val;
mii_10base_t1_adv_mod_linkmode_t(lpa, val);
}
return 0;
}
/**
* genphy_c45_read_eee_cap1 - read supported EEE link modes from register 3.20
* @phydev: target phy_device struct
*/
static int genphy_c45_read_eee_cap1(struct phy_device *phydev)
{
int val;
/* IEEE 802.3-2018 45.2.3.10 EEE control and capability 1
* (Register 3.20)
*/
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
if (val < 0)
return val;
/* The 802.3 2018 standard says the top 2 bits are reserved and should
* read as 0. Also, it seems unlikely anybody will build a PHY which
* supports 100GBASE-R deep sleep all the way down to 100BASE-TX EEE.
* If MDIO_PCS_EEE_ABLE is 0xffff assume EEE is not supported.
*/
if (val == 0xffff)
return 0;
mii_eee_cap1_mod_linkmode_t(phydev->supported_eee, val);
/* Some buggy devices indicate EEE link modes in MDIO_PCS_EEE_ABLE
* which they don't support as indicated by BMSR, ESTATUS etc.
*/
linkmode_and(phydev->supported_eee, phydev->supported_eee,
phydev->supported);
return 0;
}
/**
* genphy_c45_read_eee_cap2 - read supported EEE link modes from register 3.21
* @phydev: target phy_device struct
*/
static int genphy_c45_read_eee_cap2(struct phy_device *phydev)
{
int val;
/* IEEE 802.3-2022 45.2.3.11 EEE control and capability 2
* (Register 3.21)
*/
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE2);
if (val < 0)
return val;
/* IEEE 802.3-2022 45.2.3.11 says 9 bits are reserved. */
if (val == 0xffff)
return 0;
mii_eee_cap2_mod_linkmode_sup_t(phydev->supported_eee, val);
return 0;
}
/**
* genphy_c45_read_eee_abilities - read supported EEE link modes
* @phydev: target phy_device struct
*/
int genphy_c45_read_eee_abilities(struct phy_device *phydev)
{
int val;
/* There is not indicator whether optional register
* "EEE control and capability 1" (3.20) is supported. Read it only
* on devices with appropriate linkmodes.
*/
if (linkmode_intersects(phydev->supported, PHY_EEE_CAP1_FEATURES)) {
val = genphy_c45_read_eee_cap1(phydev);
if (val)
return val;
}
/* Same for cap2 (3.21) */
if (linkmode_intersects(phydev->supported, PHY_EEE_CAP2_FEATURES)) {
val = genphy_c45_read_eee_cap2(phydev);
if (val)
return val;
}
if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported)) {
/* IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
* (Register 1.2295)
*/
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10T1L_STAT);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported_eee,
val & MDIO_PMA_10T1L_STAT_EEE);
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_eee_abilities);
/**
* genphy_c45_an_config_eee_aneg - configure EEE advertisement
* @phydev: target phy_device struct
*/
int genphy_c45_an_config_eee_aneg(struct phy_device *phydev)
{
if (!phydev->eee_enabled) {
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {};
return genphy_c45_write_eee_adv(phydev, adv);
}
return genphy_c45_write_eee_adv(phydev, phydev->advertising_eee);
}
/**
* genphy_c45_pma_baset1_read_abilities - read supported baset1 link modes from PMA
* @phydev: target phy_device struct
*
* Read the supported link modes from the extended BASE-T1 ability register
*/
int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev)
{
int val;
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported,
val & MDIO_PMA_PMD_BT1_B10L_ABLE);
linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
phydev->supported,
val & MDIO_PMA_PMD_BT1_B100_ABLE);
linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT,
phydev->supported,
val & MDIO_PMA_PMD_BT1_B1000_ABLE);
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_STAT);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
phydev->supported,
val & MDIO_AN_STAT1_ABLE);
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_read_abilities);
/**
* genphy_c45_pma_read_ext_abilities - read supported link modes from PMA
* @phydev: target phy_device struct
*
* Read the supported link modes from the PMA/PMD extended ability register
* (Register 1.11).
*/
int genphy_c45_pma_read_ext_abilities(struct phy_device *phydev)
{
int val;
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_10GBLRM);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_10GBT);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_10GBKX4);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_10GBKR);
linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_1000BT);
linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_1000BKX);
linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_100BTX);
linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_100BTX);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_10BT);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
phydev->supported,
val & MDIO_PMA_EXTABLE_10BT);
if (val & MDIO_PMA_EXTABLE_NBT) {
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
MDIO_PMA_NG_EXTABLE);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_NG_EXTABLE_2_5GBT);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_NG_EXTABLE_5GBT);
}
if (val & MDIO_PMA_EXTABLE_BT1) {
val = genphy_c45_pma_baset1_read_abilities(phydev);
if (val < 0)
return val;
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_read_ext_abilities);
/**
* genphy_c45_pma_read_abilities - read supported link modes from PMA
* @phydev: target phy_device struct
*
* Read the supported link modes from the PMA Status 2 (1.8) register. If bit
* 1.8.9 is set, the list of supported modes is build using the values in the
* PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related
* modes. If bit 1.11.14 is set, then the list is also extended with the modes
* in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and
* 5GBASET are supported.
*/
int genphy_c45_pma_read_abilities(struct phy_device *phydev)
{
int val;
linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) {
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (val < 0)
return val;
if (val & MDIO_AN_STAT1_ABLE)
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
phydev->supported);
}
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
phydev->supported,
val & MDIO_PMA_STAT2_10GBSR);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
phydev->supported,
val & MDIO_PMA_STAT2_10GBLR);
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
phydev->supported,
val & MDIO_PMA_STAT2_10GBER);
if (val & MDIO_PMA_STAT2_EXTABLE) {
val = genphy_c45_pma_read_ext_abilities(phydev);
if (val < 0)
return val;
}
/* This is optional functionality. If not supported, we may get an error
* which should be ignored.
*/
genphy_c45_read_eee_abilities(phydev);
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities);
/* Read master/slave preference from registers.
* The preference is read from the BIT(4) of BASE-T1 AN
* advertisement register 7.515 and whether the preference
* is forced or not, it is read from BASE-T1 AN advertisement
* register 7.514.
*/
int genphy_c45_baset1_read_status(struct phy_device *phydev)
{
int ret;
int cfg;
phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_L);
if (ret < 0)
return ret;
cfg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_T1_ADV_M);
if (cfg < 0)
return cfg;
if (ret & MDIO_AN_T1_ADV_L_FORCE_MS) {
if (cfg & MDIO_AN_T1_ADV_M_MST)
phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
else
phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
} else {
if (cfg & MDIO_AN_T1_ADV_M_MST)
phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_PREFERRED;
else
phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_baset1_read_status);
/**
* genphy_c45_read_status - read PHY status
* @phydev: target phy_device struct
*
* Reads status from PHY and sets phy_device members accordingly.
*/
int genphy_c45_read_status(struct phy_device *phydev)
{
int ret;
ret = genphy_c45_read_link(phydev);
if (ret)
return ret;
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
phydev->pause = 0;
phydev->asym_pause = 0;
if (phydev->autoneg == AUTONEG_ENABLE) {
ret = genphy_c45_read_lpa(phydev);
if (ret)
return ret;
if (genphy_c45_baset1_able(phydev)) {
ret = genphy_c45_baset1_read_status(phydev);
if (ret < 0)
return ret;
}
phy_resolve_aneg_linkmode(phydev);
} else {
ret = genphy_c45_read_pma(phydev);
}
return ret;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_status);
/**
* genphy_c45_config_aneg - restart auto-negotiation or forced setup
* @phydev: target phy_device struct
*
* Description: If auto-negotiation is enabled, we configure the
* advertising, and then restart auto-negotiation. If it is not
* enabled, then we force a configuration.
*/
int genphy_c45_config_aneg(struct phy_device *phydev)
{
bool changed = false;
int ret;
if (phydev->autoneg == AUTONEG_DISABLE)
return genphy_c45_pma_setup_forced(phydev);
ret = genphy_c45_an_config_aneg(phydev);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
return genphy_c45_check_and_restart_aneg(phydev, changed);
}
EXPORT_SYMBOL_GPL(genphy_c45_config_aneg);
/* The gen10g_* functions are the old Clause 45 stub */
int gen10g_config_aneg(struct phy_device *phydev)
{
return 0;
}
EXPORT_SYMBOL_GPL(gen10g_config_aneg);
int genphy_c45_loopback(struct phy_device *phydev, bool enable)
{
return phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
MDIO_PCS_CTRL1_LOOPBACK,
enable ? MDIO_PCS_CTRL1_LOOPBACK : 0);
}
EXPORT_SYMBOL_GPL(genphy_c45_loopback);
/**
* genphy_c45_fast_retrain - configure fast retrain registers
* @phydev: target phy_device struct
* @enable: enable fast retrain or not
*
* Description: If fast-retrain is enabled, we configure PHY as
* advertising fast retrain capable and THP Bypass Request, then
* enable fast retrain. If it is not enabled, we configure fast
* retrain disabled.
*/
int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable)
{
int ret;
if (!enable)
return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR,
MDIO_PMA_10GBR_FSRT_ENABLE);
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
MDIO_AN_10GBT_CTRL_ADVFSRT2_5G);
if (ret)
return ret;
ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_CTRL2,
MDIO_AN_THP_BP2_5GT);
if (ret)
return ret;
}
return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR,
MDIO_PMA_10GBR_FSRT_ENABLE);
}
EXPORT_SYMBOL_GPL(genphy_c45_fast_retrain);
/**
* genphy_c45_plca_get_cfg - get PLCA configuration from standard registers
* @phydev: target phy_device struct
* @plca_cfg: output structure to store the PLCA configuration
*
* Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA
* Management Registers specifications, this function can be used to retrieve
* the current PLCA configuration from the standard registers in MMD 31.
*/
int genphy_c45_plca_get_cfg(struct phy_device *phydev,
struct phy_plca_cfg *plca_cfg)
{
int ret;
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_IDVER);
if (ret < 0)
return ret;
if ((ret & MDIO_OATC14_PLCA_IDM) != OATC14_IDM)
return -ENODEV;
plca_cfg->version = ret & ~MDIO_OATC14_PLCA_IDM;
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL0);
if (ret < 0)
return ret;
plca_cfg->enabled = !!(ret & MDIO_OATC14_PLCA_EN);
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_CTRL1);
if (ret < 0)
return ret;
plca_cfg->node_cnt = (ret & MDIO_OATC14_PLCA_NCNT) >> 8;
plca_cfg->node_id = (ret & MDIO_OATC14_PLCA_ID);
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_TOTMR);
if (ret < 0)
return ret;
plca_cfg->to_tmr = ret & MDIO_OATC14_PLCA_TOT;
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_BURST);
if (ret < 0)
return ret;
plca_cfg->burst_cnt = (ret & MDIO_OATC14_PLCA_MAXBC) >> 8;
plca_cfg->burst_tmr = (ret & MDIO_OATC14_PLCA_BTMR);
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_plca_get_cfg);
/**
* genphy_c45_plca_set_cfg - set PLCA configuration using standard registers
* @phydev: target phy_device struct
* @plca_cfg: structure containing the PLCA configuration. Fields set to -1 are
* not to be changed.
*
* Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA
* Management Registers specifications, this function can be used to modify
* the PLCA configuration using the standard registers in MMD 31.
*/
int genphy_c45_plca_set_cfg(struct phy_device *phydev,
const struct phy_plca_cfg *plca_cfg)
{
u16 val = 0;
int ret;
// PLCA IDVER is read-only
if (plca_cfg->version >= 0)
return -EINVAL;
// first of all, disable PLCA if required
if (plca_cfg->enabled == 0) {
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
MDIO_OATC14_PLCA_CTRL0,
MDIO_OATC14_PLCA_EN);
if (ret < 0)
return ret;
}
// check if we need to set the PLCA node count, node ID, or both
if (plca_cfg->node_cnt >= 0 || plca_cfg->node_id >= 0) {
/* if one between node count and node ID is -not- to be
* changed, read the register to later perform merge/purge of
* the configuration as appropriate
*/
if (plca_cfg->node_cnt < 0 || plca_cfg->node_id < 0) {
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
MDIO_OATC14_PLCA_CTRL1);
if (ret < 0)
return ret;
val = ret;
}
if (plca_cfg->node_cnt >= 0)
val = (val & ~MDIO_OATC14_PLCA_NCNT) |
(plca_cfg->node_cnt << 8);
if (plca_cfg->node_id >= 0)
val = (val & ~MDIO_OATC14_PLCA_ID) |
(plca_cfg->node_id);
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
MDIO_OATC14_PLCA_CTRL1, val);
if (ret < 0)
return ret;
}
if (plca_cfg->to_tmr >= 0) {
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
MDIO_OATC14_PLCA_TOTMR,
plca_cfg->to_tmr);
if (ret < 0)
return ret;
}
// check if we need to set the PLCA burst count, burst timer, or both
if (plca_cfg->burst_cnt >= 0 || plca_cfg->burst_tmr >= 0) {
/* if one between burst count and burst timer is -not- to be
* changed, read the register to later perform merge/purge of
* the configuration as appropriate
*/
if (plca_cfg->burst_cnt < 0 || plca_cfg->burst_tmr < 0) {
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
MDIO_OATC14_PLCA_BURST);
if (ret < 0)
return ret;
val = ret;
}
if (plca_cfg->burst_cnt >= 0)
val = (val & ~MDIO_OATC14_PLCA_MAXBC) |
(plca_cfg->burst_cnt << 8);
if (plca_cfg->burst_tmr >= 0)
val = (val & ~MDIO_OATC14_PLCA_BTMR) |
(plca_cfg->burst_tmr);
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
MDIO_OATC14_PLCA_BURST, val);
if (ret < 0)
return ret;
}
// if we need to enable PLCA, do it at the end
if (plca_cfg->enabled > 0) {
ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
MDIO_OATC14_PLCA_CTRL0,
MDIO_OATC14_PLCA_EN);
if (ret < 0)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_plca_set_cfg);
/**
* genphy_c45_plca_get_status - get PLCA status from standard registers
* @phydev: target phy_device struct
* @plca_st: output structure to store the PLCA status
*
* Description: if the PHY complies to the Open Alliance TC14 10BASE-T1S PLCA
* Management Registers specifications, this function can be used to retrieve
* the current PLCA status information from the standard registers in MMD 31.
*/
int genphy_c45_plca_get_status(struct phy_device *phydev,
struct phy_plca_status *plca_st)
{
int ret;
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MDIO_OATC14_PLCA_STATUS);
if (ret < 0)
return ret;
plca_st->pst = !!(ret & MDIO_OATC14_PLCA_PST);
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_plca_get_status);
/**
* genphy_c45_eee_is_active - get EEE status
* @phydev: target phy_device struct
* @adv: variable to store advertised linkmodes
* @lp: variable to store LP advertised linkmodes
* @is_enabled: variable to store EEE enabled/disabled configuration value
*
* Description: this function will read local and link partner PHY
* advertisements. Compare them return current EEE state.
*/
int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv,
unsigned long *lp, bool *is_enabled)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_adv) = {};
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_lp) = {};
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
bool eee_enabled, eee_active;
int ret;
ret = genphy_c45_read_eee_adv(phydev, tmp_adv);
if (ret)
return ret;
ret = genphy_c45_read_eee_lpa(phydev, tmp_lp);
if (ret)
return ret;
eee_enabled = !linkmode_empty(tmp_adv);
linkmode_and(common, tmp_adv, tmp_lp);
if (eee_enabled && !linkmode_empty(common))
eee_active = phy_check_valid(phydev->speed, phydev->duplex,
common);
else
eee_active = false;
if (adv)
linkmode_copy(adv, tmp_adv);
if (lp)
linkmode_copy(lp, tmp_lp);
if (is_enabled)
*is_enabled = eee_enabled;
return eee_active;
}
EXPORT_SYMBOL(genphy_c45_eee_is_active);
/**
* genphy_c45_ethtool_get_eee - get EEE supported and status
* @phydev: target phy_device struct
* @data: ethtool_keee data
*
* Description: it reports the Supported/Advertisement/LP Advertisement
* capabilities.
*/
int genphy_c45_ethtool_get_eee(struct phy_device *phydev,
struct ethtool_keee *data)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {};
__ETHTOOL_DECLARE_LINK_MODE_MASK(lp) = {};
bool is_enabled;
int ret;
ret = genphy_c45_eee_is_active(phydev, adv, lp, &is_enabled);
if (ret < 0)
return ret;
data->eee_enabled = is_enabled;
data->eee_active = ret;
linkmode_copy(data->supported, phydev->supported_eee);
linkmode_copy(data->advertised, adv);
linkmode_copy(data->lp_advertised, lp);
return 0;
}
EXPORT_SYMBOL(genphy_c45_ethtool_get_eee);
/**
* genphy_c45_ethtool_set_eee - set EEE supported and status
* @phydev: target phy_device struct
* @data: ethtool_keee data
*
* Description: sets the Supported/Advertisement/LP Advertisement
* capabilities. If eee_enabled is false, no links modes are
* advertised, but the previously advertised link modes are
* retained. This allows EEE to be enabled/disabled in a
* non-destructive way.
* Returns either error code, 0 if there was no change, or positive
* value if there was a change which triggered auto-neg.
*/
int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
struct ethtool_keee *data)
{
int ret;
if (data->eee_enabled) {
unsigned long *adv = data->advertised;
if (!linkmode_empty(adv)) {
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp);
if (linkmode_andnot(tmp, adv, phydev->supported_eee)) {
phydev_warn(phydev, "At least some EEE link modes are not supported.\n");
return -EINVAL;
}
} else {
adv = phydev->supported_eee;
}
linkmode_copy(phydev->advertising_eee, adv);
}
phydev->eee_enabled = data->eee_enabled;
ret = genphy_c45_an_config_eee_aneg(phydev);
if (ret > 0) {
ret = phy_restart_aneg(phydev);
if (ret < 0)
return ret;
/* explicitly return 1, otherwise (ret > 0) value will be
* overwritten by phy_restart_aneg().
*/
return 1;
}
return ret;
}
EXPORT_SYMBOL(genphy_c45_ethtool_set_eee);
struct phy_driver genphy_c45_driver = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic Clause 45 PHY",
.read_status = genphy_c45_read_status,
};