blob: 4bb541728846d3b92efe50c213cf13fb0df0980b [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
#define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10
#define AT803X_SFC_ASSERT_CRS BIT(11)
#define AT803X_SFC_FORCE_LINK BIT(10)
#define AT803X_SFC_MDI_CROSSOVER_MODE_M GENMASK(6, 5)
#define AT803X_SFC_AUTOMATIC_CROSSOVER 0x3
#define AT803X_SFC_MANUAL_MDIX 0x1
#define AT803X_SFC_MANUAL_MDI 0x0
#define AT803X_SFC_SQE_TEST BIT(2)
#define AT803X_SFC_POLARITY_REVERSAL BIT(1)
#define AT803X_SFC_DISABLE_JABBER BIT(0)
#define AT803X_SPECIFIC_STATUS 0x11
#define AT803X_SS_SPEED_MASK GENMASK(15, 14)
#define AT803X_SS_SPEED_1000 2
#define AT803X_SS_SPEED_100 1
#define AT803X_SS_SPEED_10 0
#define AT803X_SS_DUPLEX BIT(13)
#define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11)
#define AT803X_SS_MDIX BIT(6)
#define QCA808X_SS_SPEED_MASK GENMASK(9, 7)
#define QCA808X_SS_SPEED_2500 4
#define AT803X_INTR_ENABLE 0x12
#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14)
#define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13)
#define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12)
#define AT803X_INTR_ENABLE_LINK_FAIL BIT(11)
#define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10)
#define AT803X_INTR_ENABLE_LINK_FAIL_BX BIT(8)
#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX BIT(7)
#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5)
#define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1)
#define AT803X_INTR_ENABLE_WOL BIT(0)
#define AT803X_INTR_STATUS 0x13
#define AT803X_SMART_SPEED 0x14
#define AT803X_SMART_SPEED_ENABLE BIT(5)
#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK GENMASK(4, 2)
#define AT803X_SMART_SPEED_BYPASS_TIMER BIT(1)
#define AT803X_CDT 0x16
#define AT803X_CDT_MDI_PAIR_MASK GENMASK(9, 8)
#define AT803X_CDT_ENABLE_TEST BIT(0)
#define AT803X_CDT_STATUS 0x1c
#define AT803X_CDT_STATUS_STAT_NORMAL 0
#define AT803X_CDT_STATUS_STAT_SHORT 1
#define AT803X_CDT_STATUS_STAT_OPEN 2
#define AT803X_CDT_STATUS_STAT_FAIL 3
#define AT803X_CDT_STATUS_STAT_MASK GENMASK(9, 8)
#define AT803X_CDT_STATUS_DELTA_TIME_MASK GENMASK(7, 0)
#define QCA808X_CDT_ENABLE_TEST BIT(15)
#define QCA808X_CDT_INTER_CHECK_DIS BIT(13)
#define QCA808X_CDT_STATUS BIT(11)
#define QCA808X_CDT_LENGTH_UNIT BIT(10)
#define QCA808X_MMD3_CDT_STATUS 0x8064
#define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065
#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066
#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067
#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068
#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8)
#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0)
#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12)
#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8)
#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4)
#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0)
#define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0)
#define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
#define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
#define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
#define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
#define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2)
#define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
#define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
#define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
/* NORMAL are MDI with type set to 0 */
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
QCA808X_CDT_STATUS_STAT_MDI1)
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
QCA808X_CDT_STATUS_STAT_MDI1)
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
QCA808X_CDT_STATUS_STAT_MDI2)
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
QCA808X_CDT_STATUS_STAT_MDI2)
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
QCA808X_CDT_STATUS_STAT_MDI3)
#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
QCA808X_CDT_STATUS_STAT_MDI3)
/* Added for reference of existence but should be handled by wait_for_completion already */
#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3))
#define QCA808X_MMD7_LED_GLOBAL 0x8073
#define QCA808X_LED_BLINK_1 GENMASK(11, 6)
#define QCA808X_LED_BLINK_2 GENMASK(5, 0)
/* Values are the same for both BLINK_1 and BLINK_2 */
#define QCA808X_LED_BLINK_FREQ_MASK GENMASK(5, 3)
#define QCA808X_LED_BLINK_FREQ_2HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
#define QCA808X_LED_BLINK_FREQ_4HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
#define QCA808X_LED_BLINK_FREQ_8HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
#define QCA808X_LED_BLINK_FREQ_16HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
#define QCA808X_LED_BLINK_FREQ_32HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
#define QCA808X_LED_BLINK_FREQ_64HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
#define QCA808X_LED_BLINK_FREQ_128HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
#define QCA808X_LED_BLINK_FREQ_256HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
#define QCA808X_LED_BLINK_DUTY_MASK GENMASK(2, 0)
#define QCA808X_LED_BLINK_DUTY_50_50 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
#define QCA808X_LED_BLINK_DUTY_75_25 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
#define QCA808X_LED_BLINK_DUTY_25_75 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
#define QCA808X_LED_BLINK_DUTY_33_67 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
#define QCA808X_LED_BLINK_DUTY_67_33 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
#define QCA808X_LED_BLINK_DUTY_17_83 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
#define QCA808X_LED_BLINK_DUTY_83_17 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
#define QCA808X_LED_BLINK_DUTY_8_92 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
/* LED hw control pattern is the same for every LED */
#define QCA808X_LED_PATTERN_MASK GENMASK(15, 0)
#define QCA808X_LED_SPEED2500_ON BIT(15)
#define QCA808X_LED_SPEED2500_BLINK BIT(14)
/* Follow blink trigger even if duplex or speed condition doesn't match */
#define QCA808X_LED_BLINK_CHECK_BYPASS BIT(13)
#define QCA808X_LED_FULL_DUPLEX_ON BIT(12)
#define QCA808X_LED_HALF_DUPLEX_ON BIT(11)
#define QCA808X_LED_TX_BLINK BIT(10)
#define QCA808X_LED_RX_BLINK BIT(9)
#define QCA808X_LED_TX_ON_10MS BIT(8)
#define QCA808X_LED_RX_ON_10MS BIT(7)
#define QCA808X_LED_SPEED1000_ON BIT(6)
#define QCA808X_LED_SPEED100_ON BIT(5)
#define QCA808X_LED_SPEED10_ON BIT(4)
#define QCA808X_LED_COLLISION_BLINK BIT(3)
#define QCA808X_LED_SPEED1000_BLINK BIT(2)
#define QCA808X_LED_SPEED100_BLINK BIT(1)
#define QCA808X_LED_SPEED10_BLINK BIT(0)
/* LED force ctrl is the same for every LED
* No documentation exist for this, not even internal one
* with NDA as QCOM gives only info about configuring
* hw control pattern rules and doesn't indicate any way
* to force the LED to specific mode.
* These define comes from reverse and testing and maybe
* lack of some info or some info are not entirely correct.
* For the basic LED control and hw control these finding
* are enough to support LED control in all the required APIs.
*
* On doing some comparison with implementation with qca807x,
* it was found that it's 1:1 equal to it and confirms all the
* reverse done. It was also found further specification with the
* force mode and the blink modes.
*/
#define QCA808X_LED_FORCE_EN BIT(15)
#define QCA808X_LED_FORCE_MODE_MASK GENMASK(14, 13)
#define QCA808X_LED_FORCE_BLINK_1 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
#define QCA808X_LED_FORCE_BLINK_2 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
#define QCA808X_LED_FORCE_ON FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
#define QCA808X_LED_FORCE_OFF FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
#define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00
#define QCA8327_DEBUG_MANU_CTRL_EN BIT(2)
#define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2)
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
#define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05
#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
#define AT803X_DEBUG_REG_HIB_CTRL 0x0b
#define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10)
#define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13)
#define AT803X_DEBUG_HIB_CTRL_PS_HIB_EN BIT(15)
#define AT803X_DEFAULT_DOWNSHIFT 5
#define AT803X_MIN_DOWNSHIFT 2
#define AT803X_MAX_DOWNSHIFT 9
enum stat_access_type {
PHY,
MMD
};
struct at803x_hw_stat {
const char *string;
u8 reg;
u32 mask;
enum stat_access_type access_type;
};
struct at803x_ss_mask {
u16 speed_mask;
u8 speed_shift;
};
int at803x_debug_reg_read(struct phy_device *phydev, u16 reg);
int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
u16 clear, u16 set);
int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data);
int at803x_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol);
void at803x_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol);
int at803x_ack_interrupt(struct phy_device *phydev);
int at803x_config_intr(struct phy_device *phydev);
irqreturn_t at803x_handle_interrupt(struct phy_device *phydev);
int at803x_read_specific_status(struct phy_device *phydev,
struct at803x_ss_mask ss_mask);
int at803x_config_mdix(struct phy_device *phydev, u8 ctrl);
int at803x_prepare_config_aneg(struct phy_device *phydev);
int at803x_read_status(struct phy_device *phydev);
int at803x_get_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, void *data);
int at803x_set_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, const void *data);
int at803x_cdt_fault_length(int dt);
int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start);
int at803x_cdt_wait_for_completion(struct phy_device *phydev,
u32 cdt_en);
int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished);
int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg);
bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg);
int qca808x_led_reg_brightness_set(struct phy_device *phydev,
u16 reg, enum led_brightness value);
int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
unsigned long *delay_on,
unsigned long *delay_off);