| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/fs/ext4/inode.c |
| * |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * from |
| * |
| * linux/fs/minix/inode.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * 64-bit file support on 64-bit platforms by Jakub Jelinek |
| * (jj@sunsite.ms.mff.cuni.cz) |
| * |
| * Assorted race fixes, rewrite of ext4_get_block() by Al Viro, 2000 |
| */ |
| |
| #include <linux/fs.h> |
| #include <linux/mount.h> |
| #include <linux/time.h> |
| #include <linux/highuid.h> |
| #include <linux/pagemap.h> |
| #include <linux/dax.h> |
| #include <linux/quotaops.h> |
| #include <linux/string.h> |
| #include <linux/buffer_head.h> |
| #include <linux/writeback.h> |
| #include <linux/pagevec.h> |
| #include <linux/mpage.h> |
| #include <linux/namei.h> |
| #include <linux/uio.h> |
| #include <linux/bio.h> |
| #include <linux/workqueue.h> |
| #include <linux/kernel.h> |
| #include <linux/printk.h> |
| #include <linux/slab.h> |
| #include <linux/bitops.h> |
| #include <linux/iomap.h> |
| #include <linux/iversion.h> |
| |
| #include "ext4_jbd2.h" |
| #include "xattr.h" |
| #include "acl.h" |
| #include "truncate.h" |
| |
| #include <trace/events/ext4.h> |
| |
| static __u32 ext4_inode_csum(struct inode *inode, struct ext4_inode *raw, |
| struct ext4_inode_info *ei) |
| { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| __u32 csum; |
| __u16 dummy_csum = 0; |
| int offset = offsetof(struct ext4_inode, i_checksum_lo); |
| unsigned int csum_size = sizeof(dummy_csum); |
| |
| csum = ext4_chksum(sbi, ei->i_csum_seed, (__u8 *)raw, offset); |
| csum = ext4_chksum(sbi, csum, (__u8 *)&dummy_csum, csum_size); |
| offset += csum_size; |
| csum = ext4_chksum(sbi, csum, (__u8 *)raw + offset, |
| EXT4_GOOD_OLD_INODE_SIZE - offset); |
| |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { |
| offset = offsetof(struct ext4_inode, i_checksum_hi); |
| csum = ext4_chksum(sbi, csum, (__u8 *)raw + |
| EXT4_GOOD_OLD_INODE_SIZE, |
| offset - EXT4_GOOD_OLD_INODE_SIZE); |
| if (EXT4_FITS_IN_INODE(raw, ei, i_checksum_hi)) { |
| csum = ext4_chksum(sbi, csum, (__u8 *)&dummy_csum, |
| csum_size); |
| offset += csum_size; |
| } |
| csum = ext4_chksum(sbi, csum, (__u8 *)raw + offset, |
| EXT4_INODE_SIZE(inode->i_sb) - offset); |
| } |
| |
| return csum; |
| } |
| |
| static int ext4_inode_csum_verify(struct inode *inode, struct ext4_inode *raw, |
| struct ext4_inode_info *ei) |
| { |
| __u32 provided, calculated; |
| |
| if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != |
| cpu_to_le32(EXT4_OS_LINUX) || |
| !ext4_has_metadata_csum(inode->i_sb)) |
| return 1; |
| |
| provided = le16_to_cpu(raw->i_checksum_lo); |
| calculated = ext4_inode_csum(inode, raw, ei); |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE && |
| EXT4_FITS_IN_INODE(raw, ei, i_checksum_hi)) |
| provided |= ((__u32)le16_to_cpu(raw->i_checksum_hi)) << 16; |
| else |
| calculated &= 0xFFFF; |
| |
| return provided == calculated; |
| } |
| |
| void ext4_inode_csum_set(struct inode *inode, struct ext4_inode *raw, |
| struct ext4_inode_info *ei) |
| { |
| __u32 csum; |
| |
| if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != |
| cpu_to_le32(EXT4_OS_LINUX) || |
| !ext4_has_metadata_csum(inode->i_sb)) |
| return; |
| |
| csum = ext4_inode_csum(inode, raw, ei); |
| raw->i_checksum_lo = cpu_to_le16(csum & 0xFFFF); |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE && |
| EXT4_FITS_IN_INODE(raw, ei, i_checksum_hi)) |
| raw->i_checksum_hi = cpu_to_le16(csum >> 16); |
| } |
| |
| static inline int ext4_begin_ordered_truncate(struct inode *inode, |
| loff_t new_size) |
| { |
| trace_ext4_begin_ordered_truncate(inode, new_size); |
| /* |
| * If jinode is zero, then we never opened the file for |
| * writing, so there's no need to call |
| * jbd2_journal_begin_ordered_truncate() since there's no |
| * outstanding writes we need to flush. |
| */ |
| if (!EXT4_I(inode)->jinode) |
| return 0; |
| return jbd2_journal_begin_ordered_truncate(EXT4_JOURNAL(inode), |
| EXT4_I(inode)->jinode, |
| new_size); |
| } |
| |
| static int ext4_meta_trans_blocks(struct inode *inode, int lblocks, |
| int pextents); |
| |
| /* |
| * Test whether an inode is a fast symlink. |
| * A fast symlink has its symlink data stored in ext4_inode_info->i_data. |
| */ |
| int ext4_inode_is_fast_symlink(struct inode *inode) |
| { |
| if (!(EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL)) { |
| int ea_blocks = EXT4_I(inode)->i_file_acl ? |
| EXT4_CLUSTER_SIZE(inode->i_sb) >> 9 : 0; |
| |
| if (ext4_has_inline_data(inode)) |
| return 0; |
| |
| return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); |
| } |
| return S_ISLNK(inode->i_mode) && inode->i_size && |
| (inode->i_size < EXT4_N_BLOCKS * 4); |
| } |
| |
| /* |
| * Called at the last iput() if i_nlink is zero. |
| */ |
| void ext4_evict_inode(struct inode *inode) |
| { |
| handle_t *handle; |
| int err; |
| /* |
| * Credits for final inode cleanup and freeing: |
| * sb + inode (ext4_orphan_del()), block bitmap, group descriptor |
| * (xattr block freeing), bitmap, group descriptor (inode freeing) |
| */ |
| int extra_credits = 6; |
| struct ext4_xattr_inode_array *ea_inode_array = NULL; |
| bool freeze_protected = false; |
| |
| trace_ext4_evict_inode(inode); |
| |
| if (EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL) |
| ext4_evict_ea_inode(inode); |
| if (inode->i_nlink) { |
| truncate_inode_pages_final(&inode->i_data); |
| |
| goto no_delete; |
| } |
| |
| if (is_bad_inode(inode)) |
| goto no_delete; |
| dquot_initialize(inode); |
| |
| if (ext4_should_order_data(inode)) |
| ext4_begin_ordered_truncate(inode, 0); |
| truncate_inode_pages_final(&inode->i_data); |
| |
| /* |
| * For inodes with journalled data, transaction commit could have |
| * dirtied the inode. And for inodes with dioread_nolock, unwritten |
| * extents converting worker could merge extents and also have dirtied |
| * the inode. Flush worker is ignoring it because of I_FREEING flag but |
| * we still need to remove the inode from the writeback lists. |
| */ |
| if (!list_empty_careful(&inode->i_io_list)) |
| inode_io_list_del(inode); |
| |
| /* |
| * Protect us against freezing - iput() caller didn't have to have any |
| * protection against it. When we are in a running transaction though, |
| * we are already protected against freezing and we cannot grab further |
| * protection due to lock ordering constraints. |
| */ |
| if (!ext4_journal_current_handle()) { |
| sb_start_intwrite(inode->i_sb); |
| freeze_protected = true; |
| } |
| |
| if (!IS_NOQUOTA(inode)) |
| extra_credits += EXT4_MAXQUOTAS_DEL_BLOCKS(inode->i_sb); |
| |
| /* |
| * Block bitmap, group descriptor, and inode are accounted in both |
| * ext4_blocks_for_truncate() and extra_credits. So subtract 3. |
| */ |
| handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE, |
| ext4_blocks_for_truncate(inode) + extra_credits - 3); |
| if (IS_ERR(handle)) { |
| ext4_std_error(inode->i_sb, PTR_ERR(handle)); |
| /* |
| * If we're going to skip the normal cleanup, we still need to |
| * make sure that the in-core orphan linked list is properly |
| * cleaned up. |
| */ |
| ext4_orphan_del(NULL, inode); |
| if (freeze_protected) |
| sb_end_intwrite(inode->i_sb); |
| goto no_delete; |
| } |
| |
| if (IS_SYNC(inode)) |
| ext4_handle_sync(handle); |
| |
| /* |
| * Set inode->i_size to 0 before calling ext4_truncate(). We need |
| * special handling of symlinks here because i_size is used to |
| * determine whether ext4_inode_info->i_data contains symlink data or |
| * block mappings. Setting i_size to 0 will remove its fast symlink |
| * status. Erase i_data so that it becomes a valid empty block map. |
| */ |
| if (ext4_inode_is_fast_symlink(inode)) |
| memset(EXT4_I(inode)->i_data, 0, sizeof(EXT4_I(inode)->i_data)); |
| inode->i_size = 0; |
| err = ext4_mark_inode_dirty(handle, inode); |
| if (err) { |
| ext4_warning(inode->i_sb, |
| "couldn't mark inode dirty (err %d)", err); |
| goto stop_handle; |
| } |
| if (inode->i_blocks) { |
| err = ext4_truncate(inode); |
| if (err) { |
| ext4_error_err(inode->i_sb, -err, |
| "couldn't truncate inode %lu (err %d)", |
| inode->i_ino, err); |
| goto stop_handle; |
| } |
| } |
| |
| /* Remove xattr references. */ |
| err = ext4_xattr_delete_inode(handle, inode, &ea_inode_array, |
| extra_credits); |
| if (err) { |
| ext4_warning(inode->i_sb, "xattr delete (err %d)", err); |
| stop_handle: |
| ext4_journal_stop(handle); |
| ext4_orphan_del(NULL, inode); |
| if (freeze_protected) |
| sb_end_intwrite(inode->i_sb); |
| ext4_xattr_inode_array_free(ea_inode_array); |
| goto no_delete; |
| } |
| |
| /* |
| * Kill off the orphan record which ext4_truncate created. |
| * AKPM: I think this can be inside the above `if'. |
| * Note that ext4_orphan_del() has to be able to cope with the |
| * deletion of a non-existent orphan - this is because we don't |
| * know if ext4_truncate() actually created an orphan record. |
| * (Well, we could do this if we need to, but heck - it works) |
| */ |
| ext4_orphan_del(handle, inode); |
| EXT4_I(inode)->i_dtime = (__u32)ktime_get_real_seconds(); |
| |
| /* |
| * One subtle ordering requirement: if anything has gone wrong |
| * (transaction abort, IO errors, whatever), then we can still |
| * do these next steps (the fs will already have been marked as |
| * having errors), but we can't free the inode if the mark_dirty |
| * fails. |
| */ |
| if (ext4_mark_inode_dirty(handle, inode)) |
| /* If that failed, just do the required in-core inode clear. */ |
| ext4_clear_inode(inode); |
| else |
| ext4_free_inode(handle, inode); |
| ext4_journal_stop(handle); |
| if (freeze_protected) |
| sb_end_intwrite(inode->i_sb); |
| ext4_xattr_inode_array_free(ea_inode_array); |
| return; |
| no_delete: |
| /* |
| * Check out some where else accidentally dirty the evicting inode, |
| * which may probably cause inode use-after-free issues later. |
| */ |
| WARN_ON_ONCE(!list_empty_careful(&inode->i_io_list)); |
| |
| if (!list_empty(&EXT4_I(inode)->i_fc_list)) |
| ext4_fc_mark_ineligible(inode->i_sb, EXT4_FC_REASON_NOMEM, NULL); |
| ext4_clear_inode(inode); /* We must guarantee clearing of inode... */ |
| } |
| |
| #ifdef CONFIG_QUOTA |
| qsize_t *ext4_get_reserved_space(struct inode *inode) |
| { |
| return &EXT4_I(inode)->i_reserved_quota; |
| } |
| #endif |
| |
| /* |
| * Called with i_data_sem down, which is important since we can call |
| * ext4_discard_preallocations() from here. |
| */ |
| void ext4_da_update_reserve_space(struct inode *inode, |
| int used, int quota_claim) |
| { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| |
| spin_lock(&ei->i_block_reservation_lock); |
| trace_ext4_da_update_reserve_space(inode, used, quota_claim); |
| if (unlikely(used > ei->i_reserved_data_blocks)) { |
| ext4_warning(inode->i_sb, "%s: ino %lu, used %d " |
| "with only %d reserved data blocks", |
| __func__, inode->i_ino, used, |
| ei->i_reserved_data_blocks); |
| WARN_ON(1); |
| used = ei->i_reserved_data_blocks; |
| } |
| |
| /* Update per-inode reservations */ |
| ei->i_reserved_data_blocks -= used; |
| percpu_counter_sub(&sbi->s_dirtyclusters_counter, used); |
| |
| spin_unlock(&ei->i_block_reservation_lock); |
| |
| /* Update quota subsystem for data blocks */ |
| if (quota_claim) |
| dquot_claim_block(inode, EXT4_C2B(sbi, used)); |
| else { |
| /* |
| * We did fallocate with an offset that is already delayed |
| * allocated. So on delayed allocated writeback we should |
| * not re-claim the quota for fallocated blocks. |
| */ |
| dquot_release_reservation_block(inode, EXT4_C2B(sbi, used)); |
| } |
| |
| /* |
| * If we have done all the pending block allocations and if |
| * there aren't any writers on the inode, we can discard the |
| * inode's preallocations. |
| */ |
| if ((ei->i_reserved_data_blocks == 0) && |
| !inode_is_open_for_write(inode)) |
| ext4_discard_preallocations(inode); |
| } |
| |
| static int __check_block_validity(struct inode *inode, const char *func, |
| unsigned int line, |
| struct ext4_map_blocks *map) |
| { |
| if (ext4_has_feature_journal(inode->i_sb) && |
| (inode->i_ino == |
| le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum))) |
| return 0; |
| if (!ext4_inode_block_valid(inode, map->m_pblk, map->m_len)) { |
| ext4_error_inode(inode, func, line, map->m_pblk, |
| "lblock %lu mapped to illegal pblock %llu " |
| "(length %d)", (unsigned long) map->m_lblk, |
| map->m_pblk, map->m_len); |
| return -EFSCORRUPTED; |
| } |
| return 0; |
| } |
| |
| int ext4_issue_zeroout(struct inode *inode, ext4_lblk_t lblk, ext4_fsblk_t pblk, |
| ext4_lblk_t len) |
| { |
| int ret; |
| |
| if (IS_ENCRYPTED(inode) && S_ISREG(inode->i_mode)) |
| return fscrypt_zeroout_range(inode, lblk, pblk, len); |
| |
| ret = sb_issue_zeroout(inode->i_sb, pblk, len, GFP_NOFS); |
| if (ret > 0) |
| ret = 0; |
| |
| return ret; |
| } |
| |
| #define check_block_validity(inode, map) \ |
| __check_block_validity((inode), __func__, __LINE__, (map)) |
| |
| #ifdef ES_AGGRESSIVE_TEST |
| static void ext4_map_blocks_es_recheck(handle_t *handle, |
| struct inode *inode, |
| struct ext4_map_blocks *es_map, |
| struct ext4_map_blocks *map, |
| int flags) |
| { |
| int retval; |
| |
| map->m_flags = 0; |
| /* |
| * There is a race window that the result is not the same. |
| * e.g. xfstests #223 when dioread_nolock enables. The reason |
| * is that we lookup a block mapping in extent status tree with |
| * out taking i_data_sem. So at the time the unwritten extent |
| * could be converted. |
| */ |
| down_read(&EXT4_I(inode)->i_data_sem); |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) { |
| retval = ext4_ext_map_blocks(handle, inode, map, 0); |
| } else { |
| retval = ext4_ind_map_blocks(handle, inode, map, 0); |
| } |
| up_read((&EXT4_I(inode)->i_data_sem)); |
| |
| /* |
| * We don't check m_len because extent will be collpased in status |
| * tree. So the m_len might not equal. |
| */ |
| if (es_map->m_lblk != map->m_lblk || |
| es_map->m_flags != map->m_flags || |
| es_map->m_pblk != map->m_pblk) { |
| printk("ES cache assertion failed for inode: %lu " |
| "es_cached ex [%d/%d/%llu/%x] != " |
| "found ex [%d/%d/%llu/%x] retval %d flags %x\n", |
| inode->i_ino, es_map->m_lblk, es_map->m_len, |
| es_map->m_pblk, es_map->m_flags, map->m_lblk, |
| map->m_len, map->m_pblk, map->m_flags, |
| retval, flags); |
| } |
| } |
| #endif /* ES_AGGRESSIVE_TEST */ |
| |
| /* |
| * The ext4_map_blocks() function tries to look up the requested blocks, |
| * and returns if the blocks are already mapped. |
| * |
| * Otherwise it takes the write lock of the i_data_sem and allocate blocks |
| * and store the allocated blocks in the result buffer head and mark it |
| * mapped. |
| * |
| * If file type is extents based, it will call ext4_ext_map_blocks(), |
| * Otherwise, call with ext4_ind_map_blocks() to handle indirect mapping |
| * based files |
| * |
| * On success, it returns the number of blocks being mapped or allocated. |
| * If flags doesn't contain EXT4_GET_BLOCKS_CREATE the blocks are |
| * pre-allocated and unwritten, the resulting @map is marked as unwritten. |
| * If the flags contain EXT4_GET_BLOCKS_CREATE, it will mark @map as mapped. |
| * |
| * It returns 0 if plain look up failed (blocks have not been allocated), in |
| * that case, @map is returned as unmapped but we still do fill map->m_len to |
| * indicate the length of a hole starting at map->m_lblk. |
| * |
| * It returns the error in case of allocation failure. |
| */ |
| int ext4_map_blocks(handle_t *handle, struct inode *inode, |
| struct ext4_map_blocks *map, int flags) |
| { |
| struct extent_status es; |
| int retval; |
| int ret = 0; |
| #ifdef ES_AGGRESSIVE_TEST |
| struct ext4_map_blocks orig_map; |
| |
| memcpy(&orig_map, map, sizeof(*map)); |
| #endif |
| |
| map->m_flags = 0; |
| ext_debug(inode, "flag 0x%x, max_blocks %u, logical block %lu\n", |
| flags, map->m_len, (unsigned long) map->m_lblk); |
| |
| /* |
| * ext4_map_blocks returns an int, and m_len is an unsigned int |
| */ |
| if (unlikely(map->m_len > INT_MAX)) |
| map->m_len = INT_MAX; |
| |
| /* We can handle the block number less than EXT_MAX_BLOCKS */ |
| if (unlikely(map->m_lblk >= EXT_MAX_BLOCKS)) |
| return -EFSCORRUPTED; |
| |
| /* Lookup extent status tree firstly */ |
| if (!(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) && |
| ext4_es_lookup_extent(inode, map->m_lblk, NULL, &es)) { |
| if (ext4_es_is_written(&es) || ext4_es_is_unwritten(&es)) { |
| map->m_pblk = ext4_es_pblock(&es) + |
| map->m_lblk - es.es_lblk; |
| map->m_flags |= ext4_es_is_written(&es) ? |
| EXT4_MAP_MAPPED : EXT4_MAP_UNWRITTEN; |
| retval = es.es_len - (map->m_lblk - es.es_lblk); |
| if (retval > map->m_len) |
| retval = map->m_len; |
| map->m_len = retval; |
| } else if (ext4_es_is_delayed(&es) || ext4_es_is_hole(&es)) { |
| map->m_pblk = 0; |
| map->m_flags |= ext4_es_is_delayed(&es) ? |
| EXT4_MAP_DELAYED : 0; |
| retval = es.es_len - (map->m_lblk - es.es_lblk); |
| if (retval > map->m_len) |
| retval = map->m_len; |
| map->m_len = retval; |
| retval = 0; |
| } else { |
| BUG(); |
| } |
| |
| if (flags & EXT4_GET_BLOCKS_CACHED_NOWAIT) |
| return retval; |
| #ifdef ES_AGGRESSIVE_TEST |
| ext4_map_blocks_es_recheck(handle, inode, map, |
| &orig_map, flags); |
| #endif |
| goto found; |
| } |
| /* |
| * In the query cache no-wait mode, nothing we can do more if we |
| * cannot find extent in the cache. |
| */ |
| if (flags & EXT4_GET_BLOCKS_CACHED_NOWAIT) |
| return 0; |
| |
| /* |
| * Try to see if we can get the block without requesting a new |
| * file system block. |
| */ |
| down_read(&EXT4_I(inode)->i_data_sem); |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) { |
| retval = ext4_ext_map_blocks(handle, inode, map, 0); |
| } else { |
| retval = ext4_ind_map_blocks(handle, inode, map, 0); |
| } |
| if (retval > 0) { |
| unsigned int status; |
| |
| if (unlikely(retval != map->m_len)) { |
| ext4_warning(inode->i_sb, |
| "ES len assertion failed for inode " |
| "%lu: retval %d != map->m_len %d", |
| inode->i_ino, retval, map->m_len); |
| WARN_ON(1); |
| } |
| |
| status = map->m_flags & EXT4_MAP_UNWRITTEN ? |
| EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN; |
| if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) && |
| !(status & EXTENT_STATUS_WRITTEN) && |
| ext4_es_scan_range(inode, &ext4_es_is_delayed, map->m_lblk, |
| map->m_lblk + map->m_len - 1)) |
| status |= EXTENT_STATUS_DELAYED; |
| ext4_es_insert_extent(inode, map->m_lblk, map->m_len, |
| map->m_pblk, status); |
| } |
| up_read((&EXT4_I(inode)->i_data_sem)); |
| |
| found: |
| if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) { |
| ret = check_block_validity(inode, map); |
| if (ret != 0) |
| return ret; |
| } |
| |
| /* If it is only a block(s) look up */ |
| if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) |
| return retval; |
| |
| /* |
| * Returns if the blocks have already allocated |
| * |
| * Note that if blocks have been preallocated |
| * ext4_ext_map_blocks() returns with buffer head unmapped |
| */ |
| if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) |
| /* |
| * If we need to convert extent to unwritten |
| * we continue and do the actual work in |
| * ext4_ext_map_blocks() |
| */ |
| if (!(flags & EXT4_GET_BLOCKS_CONVERT_UNWRITTEN)) |
| return retval; |
| |
| /* |
| * Here we clear m_flags because after allocating an new extent, |
| * it will be set again. |
| */ |
| map->m_flags &= ~EXT4_MAP_FLAGS; |
| |
| /* |
| * New blocks allocate and/or writing to unwritten extent |
| * will possibly result in updating i_data, so we take |
| * the write lock of i_data_sem, and call get_block() |
| * with create == 1 flag. |
| */ |
| down_write(&EXT4_I(inode)->i_data_sem); |
| |
| /* |
| * We need to check for EXT4 here because migrate |
| * could have changed the inode type in between |
| */ |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) { |
| retval = ext4_ext_map_blocks(handle, inode, map, flags); |
| } else { |
| retval = ext4_ind_map_blocks(handle, inode, map, flags); |
| |
| if (retval > 0 && map->m_flags & EXT4_MAP_NEW) { |
| /* |
| * We allocated new blocks which will result in |
| * i_data's format changing. Force the migrate |
| * to fail by clearing migrate flags |
| */ |
| ext4_clear_inode_state(inode, EXT4_STATE_EXT_MIGRATE); |
| } |
| } |
| |
| if (retval > 0) { |
| unsigned int status; |
| |
| if (unlikely(retval != map->m_len)) { |
| ext4_warning(inode->i_sb, |
| "ES len assertion failed for inode " |
| "%lu: retval %d != map->m_len %d", |
| inode->i_ino, retval, map->m_len); |
| WARN_ON(1); |
| } |
| |
| /* |
| * We have to zeroout blocks before inserting them into extent |
| * status tree. Otherwise someone could look them up there and |
| * use them before they are really zeroed. We also have to |
| * unmap metadata before zeroing as otherwise writeback can |
| * overwrite zeros with stale data from block device. |
| */ |
| if (flags & EXT4_GET_BLOCKS_ZERO && |
| map->m_flags & EXT4_MAP_MAPPED && |
| map->m_flags & EXT4_MAP_NEW) { |
| ret = ext4_issue_zeroout(inode, map->m_lblk, |
| map->m_pblk, map->m_len); |
| if (ret) { |
| retval = ret; |
| goto out_sem; |
| } |
| } |
| |
| /* |
| * If the extent has been zeroed out, we don't need to update |
| * extent status tree. |
| */ |
| if ((flags & EXT4_GET_BLOCKS_PRE_IO) && |
| ext4_es_lookup_extent(inode, map->m_lblk, NULL, &es)) { |
| if (ext4_es_is_written(&es)) |
| goto out_sem; |
| } |
| status = map->m_flags & EXT4_MAP_UNWRITTEN ? |
| EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN; |
| if (!(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) && |
| !(status & EXTENT_STATUS_WRITTEN) && |
| ext4_es_scan_range(inode, &ext4_es_is_delayed, map->m_lblk, |
| map->m_lblk + map->m_len - 1)) |
| status |= EXTENT_STATUS_DELAYED; |
| ext4_es_insert_extent(inode, map->m_lblk, map->m_len, |
| map->m_pblk, status); |
| } |
| |
| out_sem: |
| up_write((&EXT4_I(inode)->i_data_sem)); |
| if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) { |
| ret = check_block_validity(inode, map); |
| if (ret != 0) |
| return ret; |
| |
| /* |
| * Inodes with freshly allocated blocks where contents will be |
| * visible after transaction commit must be on transaction's |
| * ordered data list. |
| */ |
| if (map->m_flags & EXT4_MAP_NEW && |
| !(map->m_flags & EXT4_MAP_UNWRITTEN) && |
| !(flags & EXT4_GET_BLOCKS_ZERO) && |
| !ext4_is_quota_file(inode) && |
| ext4_should_order_data(inode)) { |
| loff_t start_byte = |
| (loff_t)map->m_lblk << inode->i_blkbits; |
| loff_t length = (loff_t)map->m_len << inode->i_blkbits; |
| |
| if (flags & EXT4_GET_BLOCKS_IO_SUBMIT) |
| ret = ext4_jbd2_inode_add_wait(handle, inode, |
| start_byte, length); |
| else |
| ret = ext4_jbd2_inode_add_write(handle, inode, |
| start_byte, length); |
| if (ret) |
| return ret; |
| } |
| } |
| if (retval > 0 && (map->m_flags & EXT4_MAP_UNWRITTEN || |
| map->m_flags & EXT4_MAP_MAPPED)) |
| ext4_fc_track_range(handle, inode, map->m_lblk, |
| map->m_lblk + map->m_len - 1); |
| if (retval < 0) |
| ext_debug(inode, "failed with err %d\n", retval); |
| return retval; |
| } |
| |
| /* |
| * Update EXT4_MAP_FLAGS in bh->b_state. For buffer heads attached to pages |
| * we have to be careful as someone else may be manipulating b_state as well. |
| */ |
| static void ext4_update_bh_state(struct buffer_head *bh, unsigned long flags) |
| { |
| unsigned long old_state; |
| unsigned long new_state; |
| |
| flags &= EXT4_MAP_FLAGS; |
| |
| /* Dummy buffer_head? Set non-atomically. */ |
| if (!bh->b_page) { |
| bh->b_state = (bh->b_state & ~EXT4_MAP_FLAGS) | flags; |
| return; |
| } |
| /* |
| * Someone else may be modifying b_state. Be careful! This is ugly but |
| * once we get rid of using bh as a container for mapping information |
| * to pass to / from get_block functions, this can go away. |
| */ |
| old_state = READ_ONCE(bh->b_state); |
| do { |
| new_state = (old_state & ~EXT4_MAP_FLAGS) | flags; |
| } while (unlikely(!try_cmpxchg(&bh->b_state, &old_state, new_state))); |
| } |
| |
| static int _ext4_get_block(struct inode *inode, sector_t iblock, |
| struct buffer_head *bh, int flags) |
| { |
| struct ext4_map_blocks map; |
| int ret = 0; |
| |
| if (ext4_has_inline_data(inode)) |
| return -ERANGE; |
| |
| map.m_lblk = iblock; |
| map.m_len = bh->b_size >> inode->i_blkbits; |
| |
| ret = ext4_map_blocks(ext4_journal_current_handle(), inode, &map, |
| flags); |
| if (ret > 0) { |
| map_bh(bh, inode->i_sb, map.m_pblk); |
| ext4_update_bh_state(bh, map.m_flags); |
| bh->b_size = inode->i_sb->s_blocksize * map.m_len; |
| ret = 0; |
| } else if (ret == 0) { |
| /* hole case, need to fill in bh->b_size */ |
| bh->b_size = inode->i_sb->s_blocksize * map.m_len; |
| } |
| return ret; |
| } |
| |
| int ext4_get_block(struct inode *inode, sector_t iblock, |
| struct buffer_head *bh, int create) |
| { |
| return _ext4_get_block(inode, iblock, bh, |
| create ? EXT4_GET_BLOCKS_CREATE : 0); |
| } |
| |
| /* |
| * Get block function used when preparing for buffered write if we require |
| * creating an unwritten extent if blocks haven't been allocated. The extent |
| * will be converted to written after the IO is complete. |
| */ |
| int ext4_get_block_unwritten(struct inode *inode, sector_t iblock, |
| struct buffer_head *bh_result, int create) |
| { |
| int ret = 0; |
| |
| ext4_debug("ext4_get_block_unwritten: inode %lu, create flag %d\n", |
| inode->i_ino, create); |
| ret = _ext4_get_block(inode, iblock, bh_result, |
| EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT); |
| |
| /* |
| * If the buffer is marked unwritten, mark it as new to make sure it is |
| * zeroed out correctly in case of partial writes. Otherwise, there is |
| * a chance of stale data getting exposed. |
| */ |
| if (ret == 0 && buffer_unwritten(bh_result)) |
| set_buffer_new(bh_result); |
| |
| return ret; |
| } |
| |
| /* Maximum number of blocks we map for direct IO at once. */ |
| #define DIO_MAX_BLOCKS 4096 |
| |
| /* |
| * `handle' can be NULL if create is zero |
| */ |
| struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode, |
| ext4_lblk_t block, int map_flags) |
| { |
| struct ext4_map_blocks map; |
| struct buffer_head *bh; |
| int create = map_flags & EXT4_GET_BLOCKS_CREATE; |
| bool nowait = map_flags & EXT4_GET_BLOCKS_CACHED_NOWAIT; |
| int err; |
| |
| ASSERT((EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) |
| || handle != NULL || create == 0); |
| ASSERT(create == 0 || !nowait); |
| |
| map.m_lblk = block; |
| map.m_len = 1; |
| err = ext4_map_blocks(handle, inode, &map, map_flags); |
| |
| if (err == 0) |
| return create ? ERR_PTR(-ENOSPC) : NULL; |
| if (err < 0) |
| return ERR_PTR(err); |
| |
| if (nowait) |
| return sb_find_get_block(inode->i_sb, map.m_pblk); |
| |
| bh = sb_getblk(inode->i_sb, map.m_pblk); |
| if (unlikely(!bh)) |
| return ERR_PTR(-ENOMEM); |
| if (map.m_flags & EXT4_MAP_NEW) { |
| ASSERT(create != 0); |
| ASSERT((EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) |
| || (handle != NULL)); |
| |
| /* |
| * Now that we do not always journal data, we should |
| * keep in mind whether this should always journal the |
| * new buffer as metadata. For now, regular file |
| * writes use ext4_get_block instead, so it's not a |
| * problem. |
| */ |
| lock_buffer(bh); |
| BUFFER_TRACE(bh, "call get_create_access"); |
| err = ext4_journal_get_create_access(handle, inode->i_sb, bh, |
| EXT4_JTR_NONE); |
| if (unlikely(err)) { |
| unlock_buffer(bh); |
| goto errout; |
| } |
| if (!buffer_uptodate(bh)) { |
| memset(bh->b_data, 0, inode->i_sb->s_blocksize); |
| set_buffer_uptodate(bh); |
| } |
| unlock_buffer(bh); |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); |
| err = ext4_handle_dirty_metadata(handle, inode, bh); |
| if (unlikely(err)) |
| goto errout; |
| } else |
| BUFFER_TRACE(bh, "not a new buffer"); |
| return bh; |
| errout: |
| brelse(bh); |
| return ERR_PTR(err); |
| } |
| |
| struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, |
| ext4_lblk_t block, int map_flags) |
| { |
| struct buffer_head *bh; |
| int ret; |
| |
| bh = ext4_getblk(handle, inode, block, map_flags); |
| if (IS_ERR(bh)) |
| return bh; |
| if (!bh || ext4_buffer_uptodate(bh)) |
| return bh; |
| |
| ret = ext4_read_bh_lock(bh, REQ_META | REQ_PRIO, true); |
| if (ret) { |
| put_bh(bh); |
| return ERR_PTR(ret); |
| } |
| return bh; |
| } |
| |
| /* Read a contiguous batch of blocks. */ |
| int ext4_bread_batch(struct inode *inode, ext4_lblk_t block, int bh_count, |
| bool wait, struct buffer_head **bhs) |
| { |
| int i, err; |
| |
| for (i = 0; i < bh_count; i++) { |
| bhs[i] = ext4_getblk(NULL, inode, block + i, 0 /* map_flags */); |
| if (IS_ERR(bhs[i])) { |
| err = PTR_ERR(bhs[i]); |
| bh_count = i; |
| goto out_brelse; |
| } |
| } |
| |
| for (i = 0; i < bh_count; i++) |
| /* Note that NULL bhs[i] is valid because of holes. */ |
| if (bhs[i] && !ext4_buffer_uptodate(bhs[i])) |
| ext4_read_bh_lock(bhs[i], REQ_META | REQ_PRIO, false); |
| |
| if (!wait) |
| return 0; |
| |
| for (i = 0; i < bh_count; i++) |
| if (bhs[i]) |
| wait_on_buffer(bhs[i]); |
| |
| for (i = 0; i < bh_count; i++) { |
| if (bhs[i] && !buffer_uptodate(bhs[i])) { |
| err = -EIO; |
| goto out_brelse; |
| } |
| } |
| return 0; |
| |
| out_brelse: |
| for (i = 0; i < bh_count; i++) { |
| brelse(bhs[i]); |
| bhs[i] = NULL; |
| } |
| return err; |
| } |
| |
| int ext4_walk_page_buffers(handle_t *handle, struct inode *inode, |
| struct buffer_head *head, |
| unsigned from, |
| unsigned to, |
| int *partial, |
| int (*fn)(handle_t *handle, struct inode *inode, |
| struct buffer_head *bh)) |
| { |
| struct buffer_head *bh; |
| unsigned block_start, block_end; |
| unsigned blocksize = head->b_size; |
| int err, ret = 0; |
| struct buffer_head *next; |
| |
| for (bh = head, block_start = 0; |
| ret == 0 && (bh != head || !block_start); |
| block_start = block_end, bh = next) { |
| next = bh->b_this_page; |
| block_end = block_start + blocksize; |
| if (block_end <= from || block_start >= to) { |
| if (partial && !buffer_uptodate(bh)) |
| *partial = 1; |
| continue; |
| } |
| err = (*fn)(handle, inode, bh); |
| if (!ret) |
| ret = err; |
| } |
| return ret; |
| } |
| |
| /* |
| * Helper for handling dirtying of journalled data. We also mark the folio as |
| * dirty so that writeback code knows about this page (and inode) contains |
| * dirty data. ext4_writepages() then commits appropriate transaction to |
| * make data stable. |
| */ |
| static int ext4_dirty_journalled_data(handle_t *handle, struct buffer_head *bh) |
| { |
| folio_mark_dirty(bh->b_folio); |
| return ext4_handle_dirty_metadata(handle, NULL, bh); |
| } |
| |
| int do_journal_get_write_access(handle_t *handle, struct inode *inode, |
| struct buffer_head *bh) |
| { |
| int dirty = buffer_dirty(bh); |
| int ret; |
| |
| if (!buffer_mapped(bh) || buffer_freed(bh)) |
| return 0; |
| /* |
| * __block_write_begin() could have dirtied some buffers. Clean |
| * the dirty bit as jbd2_journal_get_write_access() could complain |
| * otherwise about fs integrity issues. Setting of the dirty bit |
| * by __block_write_begin() isn't a real problem here as we clear |
| * the bit before releasing a page lock and thus writeback cannot |
| * ever write the buffer. |
| */ |
| if (dirty) |
| clear_buffer_dirty(bh); |
| BUFFER_TRACE(bh, "get write access"); |
| ret = ext4_journal_get_write_access(handle, inode->i_sb, bh, |
| EXT4_JTR_NONE); |
| if (!ret && dirty) |
| ret = ext4_dirty_journalled_data(handle, bh); |
| return ret; |
| } |
| |
| #ifdef CONFIG_FS_ENCRYPTION |
| static int ext4_block_write_begin(struct folio *folio, loff_t pos, unsigned len, |
| get_block_t *get_block) |
| { |
| unsigned from = pos & (PAGE_SIZE - 1); |
| unsigned to = from + len; |
| struct inode *inode = folio->mapping->host; |
| unsigned block_start, block_end; |
| sector_t block; |
| int err = 0; |
| unsigned blocksize = inode->i_sb->s_blocksize; |
| unsigned bbits; |
| struct buffer_head *bh, *head, *wait[2]; |
| int nr_wait = 0; |
| int i; |
| |
| BUG_ON(!folio_test_locked(folio)); |
| BUG_ON(from > PAGE_SIZE); |
| BUG_ON(to > PAGE_SIZE); |
| BUG_ON(from > to); |
| |
| head = folio_buffers(folio); |
| if (!head) |
| head = create_empty_buffers(folio, blocksize, 0); |
| bbits = ilog2(blocksize); |
| block = (sector_t)folio->index << (PAGE_SHIFT - bbits); |
| |
| for (bh = head, block_start = 0; bh != head || !block_start; |
| block++, block_start = block_end, bh = bh->b_this_page) { |
| block_end = block_start + blocksize; |
| if (block_end <= from || block_start >= to) { |
| if (folio_test_uptodate(folio)) { |
| set_buffer_uptodate(bh); |
| } |
| continue; |
| } |
| if (buffer_new(bh)) |
| clear_buffer_new(bh); |
| if (!buffer_mapped(bh)) { |
| WARN_ON(bh->b_size != blocksize); |
| err = get_block(inode, block, bh, 1); |
| if (err) |
| break; |
| if (buffer_new(bh)) { |
| if (folio_test_uptodate(folio)) { |
| clear_buffer_new(bh); |
| set_buffer_uptodate(bh); |
| mark_buffer_dirty(bh); |
| continue; |
| } |
| if (block_end > to || block_start < from) |
| folio_zero_segments(folio, to, |
| block_end, |
| block_start, from); |
| continue; |
| } |
| } |
| if (folio_test_uptodate(folio)) { |
| set_buffer_uptodate(bh); |
| continue; |
| } |
| if (!buffer_uptodate(bh) && !buffer_delay(bh) && |
| !buffer_unwritten(bh) && |
| (block_start < from || block_end > to)) { |
| ext4_read_bh_lock(bh, 0, false); |
| wait[nr_wait++] = bh; |
| } |
| } |
| /* |
| * If we issued read requests, let them complete. |
| */ |
| for (i = 0; i < nr_wait; i++) { |
| wait_on_buffer(wait[i]); |
| if (!buffer_uptodate(wait[i])) |
| err = -EIO; |
| } |
| if (unlikely(err)) { |
| folio_zero_new_buffers(folio, from, to); |
| } else if (fscrypt_inode_uses_fs_layer_crypto(inode)) { |
| for (i = 0; i < nr_wait; i++) { |
| int err2; |
| |
| err2 = fscrypt_decrypt_pagecache_blocks(folio, |
| blocksize, bh_offset(wait[i])); |
| if (err2) { |
| clear_buffer_uptodate(wait[i]); |
| err = err2; |
| } |
| } |
| } |
| |
| return err; |
| } |
| #endif |
| |
| /* |
| * To preserve ordering, it is essential that the hole instantiation and |
| * the data write be encapsulated in a single transaction. We cannot |
| * close off a transaction and start a new one between the ext4_get_block() |
| * and the ext4_write_end(). So doing the jbd2_journal_start at the start of |
| * ext4_write_begin() is the right place. |
| */ |
| static int ext4_write_begin(struct file *file, struct address_space *mapping, |
| loff_t pos, unsigned len, |
| struct page **pagep, void **fsdata) |
| { |
| struct inode *inode = mapping->host; |
| int ret, needed_blocks; |
| handle_t *handle; |
| int retries = 0; |
| struct folio *folio; |
| pgoff_t index; |
| unsigned from, to; |
| |
| if (unlikely(ext4_forced_shutdown(inode->i_sb))) |
| return -EIO; |
| |
| trace_ext4_write_begin(inode, pos, len); |
| /* |
| * Reserve one block more for addition to orphan list in case |
| * we allocate blocks but write fails for some reason |
| */ |
| needed_blocks = ext4_writepage_trans_blocks(inode) + 1; |
| index = pos >> PAGE_SHIFT; |
| from = pos & (PAGE_SIZE - 1); |
| to = from + len; |
| |
| if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) { |
| ret = ext4_try_to_write_inline_data(mapping, inode, pos, len, |
| pagep); |
| if (ret < 0) |
| return ret; |
| if (ret == 1) |
| return 0; |
| } |
| |
| /* |
| * __filemap_get_folio() can take a long time if the |
| * system is thrashing due to memory pressure, or if the folio |
| * is being written back. So grab it first before we start |
| * the transaction handle. This also allows us to allocate |
| * the folio (if needed) without using GFP_NOFS. |
| */ |
| retry_grab: |
| folio = __filemap_get_folio(mapping, index, FGP_WRITEBEGIN, |
| mapping_gfp_mask(mapping)); |
| if (IS_ERR(folio)) |
| return PTR_ERR(folio); |
| /* |
| * The same as page allocation, we prealloc buffer heads before |
| * starting the handle. |
| */ |
| if (!folio_buffers(folio)) |
| create_empty_buffers(folio, inode->i_sb->s_blocksize, 0); |
| |
| folio_unlock(folio); |
| |
| retry_journal: |
| handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, needed_blocks); |
| if (IS_ERR(handle)) { |
| folio_put(folio); |
| return PTR_ERR(handle); |
| } |
| |
| folio_lock(folio); |
| if (folio->mapping != mapping) { |
| /* The folio got truncated from under us */ |
| folio_unlock(folio); |
| folio_put(folio); |
| ext4_journal_stop(handle); |
| goto retry_grab; |
| } |
| /* In case writeback began while the folio was unlocked */ |
| folio_wait_stable(folio); |
| |
| #ifdef CONFIG_FS_ENCRYPTION |
| if (ext4_should_dioread_nolock(inode)) |
| ret = ext4_block_write_begin(folio, pos, len, |
| ext4_get_block_unwritten); |
| else |
| ret = ext4_block_write_begin(folio, pos, len, ext4_get_block); |
| #else |
| if (ext4_should_dioread_nolock(inode)) |
| ret = __block_write_begin(&folio->page, pos, len, |
| ext4_get_block_unwritten); |
| else |
| ret = __block_write_begin(&folio->page, pos, len, ext4_get_block); |
| #endif |
| if (!ret && ext4_should_journal_data(inode)) { |
| ret = ext4_walk_page_buffers(handle, inode, |
| folio_buffers(folio), from, to, |
| NULL, do_journal_get_write_access); |
| } |
| |
| if (ret) { |
| bool extended = (pos + len > inode->i_size) && |
| !ext4_verity_in_progress(inode); |
| |
| folio_unlock(folio); |
| /* |
| * __block_write_begin may have instantiated a few blocks |
| * outside i_size. Trim these off again. Don't need |
| * i_size_read because we hold i_rwsem. |
| * |
| * Add inode to orphan list in case we crash before |
| * truncate finishes |
| */ |
| if (extended && ext4_can_truncate(inode)) |
| ext4_orphan_add(handle, inode); |
| |
| ext4_journal_stop(handle); |
| if (extended) { |
| ext4_truncate_failed_write(inode); |
| /* |
| * If truncate failed early the inode might |
| * still be on the orphan list; we need to |
| * make sure the inode is removed from the |
| * orphan list in that case. |
| */ |
| if (inode->i_nlink) |
| ext4_orphan_del(NULL, inode); |
| } |
| |
| if (ret == -ENOSPC && |
| ext4_should_retry_alloc(inode->i_sb, &retries)) |
| goto retry_journal; |
| folio_put(folio); |
| return ret; |
| } |
| *pagep = &folio->page; |
| return ret; |
| } |
| |
| /* For write_end() in data=journal mode */ |
| static int write_end_fn(handle_t *handle, struct inode *inode, |
| struct buffer_head *bh) |
| { |
| int ret; |
| if (!buffer_mapped(bh) || buffer_freed(bh)) |
| return 0; |
| set_buffer_uptodate(bh); |
| ret = ext4_dirty_journalled_data(handle, bh); |
| clear_buffer_meta(bh); |
| clear_buffer_prio(bh); |
| return ret; |
| } |
| |
| /* |
| * We need to pick up the new inode size which generic_commit_write gave us |
| * `file' can be NULL - eg, when called from page_symlink(). |
| * |
| * ext4 never places buffers on inode->i_mapping->i_private_list. metadata |
| * buffers are managed internally. |
| */ |
| static int ext4_write_end(struct file *file, |
| struct address_space *mapping, |
| loff_t pos, unsigned len, unsigned copied, |
| struct page *page, void *fsdata) |
| { |
| struct folio *folio = page_folio(page); |
| handle_t *handle = ext4_journal_current_handle(); |
| struct inode *inode = mapping->host; |
| loff_t old_size = inode->i_size; |
| int ret = 0, ret2; |
| int i_size_changed = 0; |
| bool verity = ext4_verity_in_progress(inode); |
| |
| trace_ext4_write_end(inode, pos, len, copied); |
| |
| if (ext4_has_inline_data(inode) && |
| ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) |
| return ext4_write_inline_data_end(inode, pos, len, copied, |
| folio); |
| |
| copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); |
| /* |
| * it's important to update i_size while still holding folio lock: |
| * page writeout could otherwise come in and zero beyond i_size. |
| * |
| * If FS_IOC_ENABLE_VERITY is running on this inode, then Merkle tree |
| * blocks are being written past EOF, so skip the i_size update. |
| */ |
| if (!verity) |
| i_size_changed = ext4_update_inode_size(inode, pos + copied); |
| folio_unlock(folio); |
| folio_put(folio); |
| |
| if (old_size < pos && !verity) |
| pagecache_isize_extended(inode, old_size, pos); |
| /* |
| * Don't mark the inode dirty under folio lock. First, it unnecessarily |
| * makes the holding time of folio lock longer. Second, it forces lock |
| * ordering of folio lock and transaction start for journaling |
| * filesystems. |
| */ |
| if (i_size_changed) |
| ret = ext4_mark_inode_dirty(handle, inode); |
| |
| if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) |
| /* if we have allocated more blocks and copied |
| * less. We will have blocks allocated outside |
| * inode->i_size. So truncate them |
| */ |
| ext4_orphan_add(handle, inode); |
| |
| ret2 = ext4_journal_stop(handle); |
| if (!ret) |
| ret = ret2; |
| |
| if (pos + len > inode->i_size && !verity) { |
| ext4_truncate_failed_write(inode); |
| /* |
| * If truncate failed early the inode might still be |
| * on the orphan list; we need to make sure the inode |
| * is removed from the orphan list in that case. |
| */ |
| if (inode->i_nlink) |
| ext4_orphan_del(NULL, inode); |
| } |
| |
| return ret ? ret : copied; |
| } |
| |
| /* |
| * This is a private version of folio_zero_new_buffers() which doesn't |
| * set the buffer to be dirty, since in data=journalled mode we need |
| * to call ext4_dirty_journalled_data() instead. |
| */ |
| static void ext4_journalled_zero_new_buffers(handle_t *handle, |
| struct inode *inode, |
| struct folio *folio, |
| unsigned from, unsigned to) |
| { |
| unsigned int block_start = 0, block_end; |
| struct buffer_head *head, *bh; |
| |
| bh = head = folio_buffers(folio); |
| do { |
| block_end = block_start + bh->b_size; |
| if (buffer_new(bh)) { |
| if (block_end > from && block_start < to) { |
| if (!folio_test_uptodate(folio)) { |
| unsigned start, size; |
| |
| start = max(from, block_start); |
| size = min(to, block_end) - start; |
| |
| folio_zero_range(folio, start, size); |
| write_end_fn(handle, inode, bh); |
| } |
| clear_buffer_new(bh); |
| } |
| } |
| block_start = block_end; |
| bh = bh->b_this_page; |
| } while (bh != head); |
| } |
| |
| static int ext4_journalled_write_end(struct file *file, |
| struct address_space *mapping, |
| loff_t pos, unsigned len, unsigned copied, |
| struct page *page, void *fsdata) |
| { |
| struct folio *folio = page_folio(page); |
| handle_t *handle = ext4_journal_current_handle(); |
| struct inode *inode = mapping->host; |
| loff_t old_size = inode->i_size; |
| int ret = 0, ret2; |
| int partial = 0; |
| unsigned from, to; |
| int size_changed = 0; |
| bool verity = ext4_verity_in_progress(inode); |
| |
| trace_ext4_journalled_write_end(inode, pos, len, copied); |
| from = pos & (PAGE_SIZE - 1); |
| to = from + len; |
| |
| BUG_ON(!ext4_handle_valid(handle)); |
| |
| if (ext4_has_inline_data(inode)) |
| return ext4_write_inline_data_end(inode, pos, len, copied, |
| folio); |
| |
| if (unlikely(copied < len) && !folio_test_uptodate(folio)) { |
| copied = 0; |
| ext4_journalled_zero_new_buffers(handle, inode, folio, |
| from, to); |
| } else { |
| if (unlikely(copied < len)) |
| ext4_journalled_zero_new_buffers(handle, inode, folio, |
| from + copied, to); |
| ret = ext4_walk_page_buffers(handle, inode, |
| folio_buffers(folio), |
| from, from + copied, &partial, |
| write_end_fn); |
| if (!partial) |
| folio_mark_uptodate(folio); |
| } |
| if (!verity) |
| size_changed = ext4_update_inode_size(inode, pos + copied); |
| EXT4_I(inode)->i_datasync_tid = handle->h_transaction->t_tid; |
| folio_unlock(folio); |
| folio_put(folio); |
| |
| if (old_size < pos && !verity) |
| pagecache_isize_extended(inode, old_size, pos); |
| |
| if (size_changed) { |
| ret2 = ext4_mark_inode_dirty(handle, inode); |
| if (!ret) |
| ret = ret2; |
| } |
| |
| if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) |
| /* if we have allocated more blocks and copied |
| * less. We will have blocks allocated outside |
| * inode->i_size. So truncate them |
| */ |
| ext4_orphan_add(handle, inode); |
| |
| ret2 = ext4_journal_stop(handle); |
| if (!ret) |
| ret = ret2; |
| if (pos + len > inode->i_size && !verity) { |
| ext4_truncate_failed_write(inode); |
| /* |
| * If truncate failed early the inode might still be |
| * on the orphan list; we need to make sure the inode |
| * is removed from the orphan list in that case. |
| */ |
| if (inode->i_nlink) |
| ext4_orphan_del(NULL, inode); |
| } |
| |
| return ret ? ret : copied; |
| } |
| |
| /* |
| * Reserve space for a single cluster |
| */ |
| static int ext4_da_reserve_space(struct inode *inode) |
| { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| int ret; |
| |
| /* |
| * We will charge metadata quota at writeout time; this saves |
| * us from metadata over-estimation, though we may go over by |
| * a small amount in the end. Here we just reserve for data. |
| */ |
| ret = dquot_reserve_block(inode, EXT4_C2B(sbi, 1)); |
| if (ret) |
| return ret; |
| |
| spin_lock(&ei->i_block_reservation_lock); |
| if (ext4_claim_free_clusters(sbi, 1, 0)) { |
| spin_unlock(&ei->i_block_reservation_lock); |
| dquot_release_reservation_block(inode, EXT4_C2B(sbi, 1)); |
| return -ENOSPC; |
| } |
| ei->i_reserved_data_blocks++; |
| trace_ext4_da_reserve_space(inode); |
| spin_unlock(&ei->i_block_reservation_lock); |
| |
| return 0; /* success */ |
| } |
| |
| void ext4_da_release_space(struct inode *inode, int to_free) |
| { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| |
| if (!to_free) |
| return; /* Nothing to release, exit */ |
| |
| spin_lock(&EXT4_I(inode)->i_block_reservation_lock); |
| |
| trace_ext4_da_release_space(inode, to_free); |
| if (unlikely(to_free > ei->i_reserved_data_blocks)) { |
| /* |
| * if there aren't enough reserved blocks, then the |
| * counter is messed up somewhere. Since this |
| * function is called from invalidate page, it's |
| * harmless to return without any action. |
| */ |
| ext4_warning(inode->i_sb, "ext4_da_release_space: " |
| "ino %lu, to_free %d with only %d reserved " |
| "data blocks", inode->i_ino, to_free, |
| ei->i_reserved_data_blocks); |
| WARN_ON(1); |
| to_free = ei->i_reserved_data_blocks; |
| } |
| ei->i_reserved_data_blocks -= to_free; |
| |
| /* update fs dirty data blocks counter */ |
| percpu_counter_sub(&sbi->s_dirtyclusters_counter, to_free); |
| |
| spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); |
| |
| dquot_release_reservation_block(inode, EXT4_C2B(sbi, to_free)); |
| } |
| |
| /* |
| * Delayed allocation stuff |
| */ |
| |
| struct mpage_da_data { |
| /* These are input fields for ext4_do_writepages() */ |
| struct inode *inode; |
| struct writeback_control *wbc; |
| unsigned int can_map:1; /* Can writepages call map blocks? */ |
| |
| /* These are internal state of ext4_do_writepages() */ |
| pgoff_t first_page; /* The first page to write */ |
| pgoff_t next_page; /* Current page to examine */ |
| pgoff_t last_page; /* Last page to examine */ |
| /* |
| * Extent to map - this can be after first_page because that can be |
| * fully mapped. We somewhat abuse m_flags to store whether the extent |
| * is delalloc or unwritten. |
| */ |
| struct ext4_map_blocks map; |
| struct ext4_io_submit io_submit; /* IO submission data */ |
| unsigned int do_map:1; |
| unsigned int scanned_until_end:1; |
| unsigned int journalled_more_data:1; |
| }; |
| |
| static void mpage_release_unused_pages(struct mpage_da_data *mpd, |
| bool invalidate) |
| { |
| unsigned nr, i; |
| pgoff_t index, end; |
| struct folio_batch fbatch; |
| struct inode *inode = mpd->inode; |
| struct address_space *mapping = inode->i_mapping; |
| |
| /* This is necessary when next_page == 0. */ |
| if (mpd->first_page >= mpd->next_page) |
| return; |
| |
| mpd->scanned_until_end = 0; |
| index = mpd->first_page; |
| end = mpd->next_page - 1; |
| if (invalidate) { |
| ext4_lblk_t start, last; |
| start = index << (PAGE_SHIFT - inode->i_blkbits); |
| last = end << (PAGE_SHIFT - inode->i_blkbits); |
| |
| /* |
| * avoid racing with extent status tree scans made by |
| * ext4_insert_delayed_block() |
| */ |
| down_write(&EXT4_I(inode)->i_data_sem); |
| ext4_es_remove_extent(inode, start, last - start + 1); |
| up_write(&EXT4_I(inode)->i_data_sem); |
| } |
| |
| folio_batch_init(&fbatch); |
| while (index <= end) { |
| nr = filemap_get_folios(mapping, &index, end, &fbatch); |
| if (nr == 0) |
| break; |
| for (i = 0; i < nr; i++) { |
| struct folio *folio = fbatch.folios[i]; |
| |
| if (folio->index < mpd->first_page) |
| continue; |
| if (folio_next_index(folio) - 1 > end) |
| continue; |
| BUG_ON(!folio_test_locked(folio)); |
| BUG_ON(folio_test_writeback(folio)); |
| if (invalidate) { |
| if (folio_mapped(folio)) |
| folio_clear_dirty_for_io(folio); |
| block_invalidate_folio(folio, 0, |
| folio_size(folio)); |
| folio_clear_uptodate(folio); |
| } |
| folio_unlock(folio); |
| } |
| folio_batch_release(&fbatch); |
| } |
| } |
| |
| static void ext4_print_free_blocks(struct inode *inode) |
| { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| struct super_block *sb = inode->i_sb; |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| |
| ext4_msg(sb, KERN_CRIT, "Total free blocks count %lld", |
| EXT4_C2B(EXT4_SB(inode->i_sb), |
| ext4_count_free_clusters(sb))); |
| ext4_msg(sb, KERN_CRIT, "Free/Dirty block details"); |
| ext4_msg(sb, KERN_CRIT, "free_blocks=%lld", |
| (long long) EXT4_C2B(EXT4_SB(sb), |
| percpu_counter_sum(&sbi->s_freeclusters_counter))); |
| ext4_msg(sb, KERN_CRIT, "dirty_blocks=%lld", |
| (long long) EXT4_C2B(EXT4_SB(sb), |
| percpu_counter_sum(&sbi->s_dirtyclusters_counter))); |
| ext4_msg(sb, KERN_CRIT, "Block reservation details"); |
| ext4_msg(sb, KERN_CRIT, "i_reserved_data_blocks=%u", |
| ei->i_reserved_data_blocks); |
| return; |
| } |
| |
| /* |
| * ext4_insert_delayed_block - adds a delayed block to the extents status |
| * tree, incrementing the reserved cluster/block |
| * count or making a pending reservation |
| * where needed |
| * |
| * @inode - file containing the newly added block |
| * @lblk - logical block to be added |
| * |
| * Returns 0 on success, negative error code on failure. |
| */ |
| static int ext4_insert_delayed_block(struct inode *inode, ext4_lblk_t lblk) |
| { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| int ret; |
| bool allocated = false; |
| |
| /* |
| * If the cluster containing lblk is shared with a delayed, |
| * written, or unwritten extent in a bigalloc file system, it's |
| * already been accounted for and does not need to be reserved. |
| * A pending reservation must be made for the cluster if it's |
| * shared with a written or unwritten extent and doesn't already |
| * have one. Written and unwritten extents can be purged from the |
| * extents status tree if the system is under memory pressure, so |
| * it's necessary to examine the extent tree if a search of the |
| * extents status tree doesn't get a match. |
| */ |
| if (sbi->s_cluster_ratio == 1) { |
| ret = ext4_da_reserve_space(inode); |
| if (ret != 0) /* ENOSPC */ |
| return ret; |
| } else { /* bigalloc */ |
| if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) { |
| if (!ext4_es_scan_clu(inode, |
| &ext4_es_is_mapped, lblk)) { |
| ret = ext4_clu_mapped(inode, |
| EXT4_B2C(sbi, lblk)); |
| if (ret < 0) |
| return ret; |
| if (ret == 0) { |
| ret = ext4_da_reserve_space(inode); |
| if (ret != 0) /* ENOSPC */ |
| return ret; |
| } else { |
| allocated = true; |
| } |
| } else { |
| allocated = true; |
| } |
| } |
| } |
| |
| ext4_es_insert_delayed_block(inode, lblk, allocated); |
| return 0; |
| } |
| |
| /* |
| * This function is grabs code from the very beginning of |
| * ext4_map_blocks, but assumes that the caller is from delayed write |
| * time. This function looks up the requested blocks and sets the |
| * buffer delay bit under the protection of i_data_sem. |
| */ |
| static int ext4_da_map_blocks(struct inode *inode, sector_t iblock, |
| struct ext4_map_blocks *map, |
| struct buffer_head *bh) |
| { |
| struct extent_status es; |
| int retval; |
| sector_t invalid_block = ~((sector_t) 0xffff); |
| #ifdef ES_AGGRESSIVE_TEST |
| struct ext4_map_blocks orig_map; |
| |
| memcpy(&orig_map, map, sizeof(*map)); |
| #endif |
| |
| if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es)) |
| invalid_block = ~0; |
| |
| map->m_flags = 0; |
| ext_debug(inode, "max_blocks %u, logical block %lu\n", map->m_len, |
| (unsigned long) map->m_lblk); |
| |
| /* Lookup extent status tree firstly */ |
| if (ext4_es_lookup_extent(inode, iblock, NULL, &es)) { |
| if (ext4_es_is_hole(&es)) |
| goto add_delayed; |
| |
| /* |
| * Delayed extent could be allocated by fallocate. |
| * So we need to check it. |
| */ |
| if (ext4_es_is_delayed(&es) && !ext4_es_is_unwritten(&es)) { |
| map_bh(bh, inode->i_sb, invalid_block); |
| set_buffer_new(bh); |
| set_buffer_delay(bh); |
| return 0; |
| } |
| |
| map->m_pblk = ext4_es_pblock(&es) + iblock - es.es_lblk; |
| retval = es.es_len - (iblock - es.es_lblk); |
| if (retval > map->m_len) |
| retval = map->m_len; |
| map->m_len = retval; |
| if (ext4_es_is_written(&es)) |
| map->m_flags |= EXT4_MAP_MAPPED; |
| else if (ext4_es_is_unwritten(&es)) |
| map->m_flags |= EXT4_MAP_UNWRITTEN; |
| else |
| BUG(); |
| |
| #ifdef ES_AGGRESSIVE_TEST |
| ext4_map_blocks_es_recheck(NULL, inode, map, &orig_map, 0); |
| #endif |
| return retval; |
| } |
| |
| /* |
| * Try to see if we can get the block without requesting a new |
| * file system block. |
| */ |
| down_read(&EXT4_I(inode)->i_data_sem); |
| if (ext4_has_inline_data(inode)) |
| retval = 0; |
| else if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| retval = ext4_ext_map_blocks(NULL, inode, map, 0); |
| else |
| retval = ext4_ind_map_blocks(NULL, inode, map, 0); |
| if (retval < 0) { |
| up_read(&EXT4_I(inode)->i_data_sem); |
| return retval; |
| } |
| if (retval > 0) { |
| unsigned int status; |
| |
| if (unlikely(retval != map->m_len)) { |
| ext4_warning(inode->i_sb, |
| "ES len assertion failed for inode " |
| "%lu: retval %d != map->m_len %d", |
| inode->i_ino, retval, map->m_len); |
| WARN_ON(1); |
| } |
| |
| status = map->m_flags & EXT4_MAP_UNWRITTEN ? |
| EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN; |
| ext4_es_insert_extent(inode, map->m_lblk, map->m_len, |
| map->m_pblk, status); |
| up_read(&EXT4_I(inode)->i_data_sem); |
| return retval; |
| } |
| up_read(&EXT4_I(inode)->i_data_sem); |
| |
| add_delayed: |
| down_write(&EXT4_I(inode)->i_data_sem); |
| retval = ext4_insert_delayed_block(inode, map->m_lblk); |
| up_write(&EXT4_I(inode)->i_data_sem); |
| if (retval) |
| return retval; |
| |
| map_bh(bh, inode->i_sb, invalid_block); |
| set_buffer_new(bh); |
| set_buffer_delay(bh); |
| return retval; |
| } |
| |
| /* |
| * This is a special get_block_t callback which is used by |
| * ext4_da_write_begin(). It will either return mapped block or |
| * reserve space for a single block. |
| * |
| * For delayed buffer_head we have BH_Mapped, BH_New, BH_Delay set. |
| * We also have b_blocknr = -1 and b_bdev initialized properly |
| * |
| * For unwritten buffer_head we have BH_Mapped, BH_New, BH_Unwritten set. |
| * We also have b_blocknr = physicalblock mapping unwritten extent and b_bdev |
| * initialized properly. |
| */ |
| int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, |
| struct buffer_head *bh, int create) |
| { |
| struct ext4_map_blocks map; |
| int ret = 0; |
| |
| BUG_ON(create == 0); |
| BUG_ON(bh->b_size != inode->i_sb->s_blocksize); |
| |
| map.m_lblk = iblock; |
| map.m_len = 1; |
| |
| /* |
| * first, we need to know whether the block is allocated already |
| * preallocated blocks are unmapped but should treated |
| * the same as allocated blocks. |
| */ |
| ret = ext4_da_map_blocks(inode, iblock, &map, bh); |
| if (ret <= 0) |
| return ret; |
| |
| map_bh(bh, inode->i_sb, map.m_pblk); |
| ext4_update_bh_state(bh, map.m_flags); |
| |
| if (buffer_unwritten(bh)) { |
| /* A delayed write to unwritten bh should be marked |
| * new and mapped. Mapped ensures that we don't do |
| * get_block multiple times when we write to the same |
| * offset and new ensures that we do proper zero out |
| * for partial write. |
| */ |
| set_buffer_new(bh); |
| set_buffer_mapped(bh); |
| } |
| return 0; |
| } |
| |
| static void mpage_folio_done(struct mpage_da_data *mpd, struct folio *folio) |
| { |
| mpd->first_page += folio_nr_pages(folio); |
| folio_unlock(folio); |
| } |
| |
| static int mpage_submit_folio(struct mpage_da_data *mpd, struct folio *folio) |
| { |
| size_t len; |
| loff_t size; |
| int err; |
| |
| BUG_ON(folio->index != mpd->first_page); |
| folio_clear_dirty_for_io(folio); |
| /* |
| * We have to be very careful here! Nothing protects writeback path |
| * against i_size changes and the page can be writeably mapped into |
| * page tables. So an application can be growing i_size and writing |
| * data through mmap while writeback runs. folio_clear_dirty_for_io() |
| * write-protects our page in page tables and the page cannot get |
| * written to again until we release folio lock. So only after |
| * folio_clear_dirty_for_io() we are safe to sample i_size for |
| * ext4_bio_write_folio() to zero-out tail of the written page. We rely |
| * on the barrier provided by folio_test_clear_dirty() in |
| * folio_clear_dirty_for_io() to make sure i_size is really sampled only |
| * after page tables are updated. |
| */ |
| size = i_size_read(mpd->inode); |
| len = folio_size(folio); |
| if (folio_pos(folio) + len > size && |
| !ext4_verity_in_progress(mpd->inode)) |
| len = size & ~PAGE_MASK; |
| err = ext4_bio_write_folio(&mpd->io_submit, folio, len); |
| if (!err) |
| mpd->wbc->nr_to_write--; |
| |
| return err; |
| } |
| |
| #define BH_FLAGS (BIT(BH_Unwritten) | BIT(BH_Delay)) |
| |
| /* |
| * mballoc gives us at most this number of blocks... |
| * XXX: That seems to be only a limitation of ext4_mb_normalize_request(). |
| * The rest of mballoc seems to handle chunks up to full group size. |
| */ |
| #define MAX_WRITEPAGES_EXTENT_LEN 2048 |
| |
| /* |
| * mpage_add_bh_to_extent - try to add bh to extent of blocks to map |
| * |
| * @mpd - extent of blocks |
| * @lblk - logical number of the block in the file |
| * @bh - buffer head we want to add to the extent |
| * |
| * The function is used to collect contig. blocks in the same state. If the |
| * buffer doesn't require mapping for writeback and we haven't started the |
| * extent of buffers to map yet, the function returns 'true' immediately - the |
| * caller can write the buffer right away. Otherwise the function returns true |
| * if the block has been added to the extent, false if the block couldn't be |
| * added. |
| */ |
| static bool mpage_add_bh_to_extent(struct mpage_da_data *mpd, ext4_lblk_t lblk, |
| struct buffer_head *bh) |
| { |
| struct ext4_map_blocks *map = &mpd->map; |
| |
| /* Buffer that doesn't need mapping for writeback? */ |
| if (!buffer_dirty(bh) || !buffer_mapped(bh) || |
| (!buffer_delay(bh) && !buffer_unwritten(bh))) { |
| /* So far no extent to map => we write the buffer right away */ |
| if (map->m_len == 0) |
| return true; |
| return false; |
| } |
| |
| /* First block in the extent? */ |
| if (map->m_len == 0) { |
| /* We cannot map unless handle is started... */ |
| if (!mpd->do_map) |
| return false; |
| map->m_lblk = lblk; |
| map->m_len = 1; |
| map->m_flags = bh->b_state & BH_FLAGS; |
| return true; |
| } |
| |
| /* Don't go larger than mballoc is willing to allocate */ |
| if (map->m_len >= MAX_WRITEPAGES_EXTENT_LEN) |
| return false; |
| |
| /* Can we merge the block to our big extent? */ |
| if (lblk == map->m_lblk + map->m_len && |
| (bh->b_state & BH_FLAGS) == map->m_flags) { |
| map->m_len++; |
| return true; |
| } |
| return false; |
| } |
| |
| /* |
| * mpage_process_page_bufs - submit page buffers for IO or add them to extent |
| * |
| * @mpd - extent of blocks for mapping |
| * @head - the first buffer in the page |
| * @bh - buffer we should start processing from |
| * @lblk - logical number of the block in the file corresponding to @bh |
| * |
| * Walk through page buffers from @bh upto @head (exclusive) and either submit |
| * the page for IO if all buffers in this page were mapped and there's no |
| * accumulated extent of buffers to map or add buffers in the page to the |
| * extent of buffers to map. The function returns 1 if the caller can continue |
| * by processing the next page, 0 if it should stop adding buffers to the |
| * extent to map because we cannot extend it anymore. It can also return value |
| * < 0 in case of error during IO submission. |
| */ |
| static int mpage_process_page_bufs(struct mpage_da_data *mpd, |
| struct buffer_head *head, |
| struct buffer_head *bh, |
| ext4_lblk_t lblk) |
| { |
| struct inode *inode = mpd->inode; |
| int err; |
| ext4_lblk_t blocks = (i_size_read(inode) + i_blocksize(inode) - 1) |
| >> inode->i_blkbits; |
| |
| if (ext4_verity_in_progress(inode)) |
| blocks = EXT_MAX_BLOCKS; |
| |
| do { |
| BUG_ON(buffer_locked(bh)); |
| |
| if (lblk >= blocks || !mpage_add_bh_to_extent(mpd, lblk, bh)) { |
| /* Found extent to map? */ |
| if (mpd->map.m_len) |
| return 0; |
| /* Buffer needs mapping and handle is not started? */ |
| if (!mpd->do_map) |
| return 0; |
| /* Everything mapped so far and we hit EOF */ |
| break; |
| } |
| } while (lblk++, (bh = bh->b_this_page) != head); |
| /* So far everything mapped? Submit the page for IO. */ |
| if (mpd->map.m_len == 0) { |
| err = mpage_submit_folio(mpd, head->b_folio); |
| if (err < 0) |
| return err; |
| mpage_folio_done(mpd, head->b_folio); |
| } |
| if (lblk >= blocks) { |
| mpd->scanned_until_end = 1; |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* |
| * mpage_process_folio - update folio buffers corresponding to changed extent |
| * and may submit fully mapped page for IO |
| * @mpd: description of extent to map, on return next extent to map |
| * @folio: Contains these buffers. |
| * @m_lblk: logical block mapping. |
| * @m_pblk: corresponding physical mapping. |
| * @map_bh: determines on return whether this page requires any further |
| * mapping or not. |
| * |
| * Scan given folio buffers corresponding to changed extent and update buffer |
| * state according to new extent state. |
| * We map delalloc buffers to their physical location, clear unwritten bits. |
| * If the given folio is not fully mapped, we update @mpd to the next extent in |
| * the given folio that needs mapping & return @map_bh as true. |
| */ |
| static int mpage_process_folio(struct mpage_da_data *mpd, struct folio *folio, |
| ext4_lblk_t *m_lblk, ext4_fsblk_t *m_pblk, |
| bool *map_bh) |
| { |
| struct buffer_head *head, *bh; |
| ext4_io_end_t *io_end = mpd->io_submit.io_end; |
| ext4_lblk_t lblk = *m_lblk; |
| ext4_fsblk_t pblock = *m_pblk; |
| int err = 0; |
| int blkbits = mpd->inode->i_blkbits; |
| ssize_t io_end_size = 0; |
| struct ext4_io_end_vec *io_end_vec = ext4_last_io_end_vec(io_end); |
| |
| bh = head = folio_buffers(folio); |
| do { |
| if (lblk < mpd->map.m_lblk) |
| continue; |
| if (lblk >= mpd->map.m_lblk + mpd->map.m_len) { |
| /* |
| * Buffer after end of mapped extent. |
| * Find next buffer in the folio to map. |
| */ |
| mpd->map.m_len = 0; |
| mpd->map.m_flags = 0; |
| io_end_vec->size += io_end_size; |
| |
| err = mpage_process_page_bufs(mpd, head, bh, lblk); |
| if (err > 0) |
| err = 0; |
| if (!err && mpd->map.m_len && mpd->map.m_lblk > lblk) { |
| io_end_vec = ext4_alloc_io_end_vec(io_end); |
| if (IS_ERR(io_end_vec)) { |
| err = PTR_ERR(io_end_vec); |
| goto out; |
| } |
| io_end_vec->offset = (loff_t)mpd->map.m_lblk << blkbits; |
| } |
| *map_bh = true; |
| goto out; |
| } |
| if (buffer_delay(bh)) { |
| clear_buffer_delay(bh); |
| bh->b_blocknr = pblock++; |
| } |
| clear_buffer_unwritten(bh); |
| io_end_size += (1 << blkbits); |
| } while (lblk++, (bh = bh->b_this_page) != head); |
| |
| io_end_vec->size += io_end_size; |
| *map_bh = false; |
| out: |
| *m_lblk = lblk; |
| *m_pblk = pblock; |
| return err; |
| } |
| |
| /* |
| * mpage_map_buffers - update buffers corresponding to changed extent and |
| * submit fully mapped pages for IO |
| * |
| * @mpd - description of extent to map, on return next extent to map |
| * |
| * Scan buffers corresponding to changed extent (we expect corresponding pages |
| * to be already locked) and update buffer state according to new extent state. |
| * We map delalloc buffers to their physical location, clear unwritten bits, |
| * and mark buffers as uninit when we perform writes to unwritten extents |
| * and do extent conversion after IO is finished. If the last page is not fully |
| * mapped, we update @map to the next extent in the last page that needs |
| * mapping. Otherwise we submit the page for IO. |
| */ |
| static int mpage_map_and_submit_buffers(struct mpage_da_data *mpd) |
| { |
| struct folio_batch fbatch; |
| unsigned nr, i; |
| struct inode *inode = mpd->inode; |
| int bpp_bits = PAGE_SHIFT - inode->i_blkbits; |
| pgoff_t start, end; |
| ext4_lblk_t lblk; |
| ext4_fsblk_t pblock; |
| int err; |
| bool map_bh = false; |
| |
| start = mpd->map.m_lblk >> bpp_bits; |
| end = (mpd->map.m_lblk + mpd->map.m_len - 1) >> bpp_bits; |
| lblk = start << bpp_bits; |
| pblock = mpd->map.m_pblk; |
| |
| folio_batch_init(&fbatch); |
| while (start <= end) { |
| nr = filemap_get_folios(inode->i_mapping, &start, end, &fbatch); |
| if (nr == 0) |
| break; |
| for (i = 0; i < nr; i++) { |
| struct folio *folio = fbatch.folios[i]; |
| |
| err = mpage_process_folio(mpd, folio, &lblk, &pblock, |
| &map_bh); |
| /* |
| * If map_bh is true, means page may require further bh |
| * mapping, or maybe the page was submitted for IO. |
| * So we return to call further extent mapping. |
| */ |
| if (err < 0 || map_bh) |
| goto out; |
| /* Page fully mapped - let IO run! */ |
| err = mpage_submit_folio(mpd, folio); |
| if (err < 0) |
| goto out; |
| mpage_folio_done(mpd, folio); |
| } |
| folio_batch_release(&fbatch); |
| } |
| /* Extent fully mapped and matches with page boundary. We are done. */ |
| mpd->map.m_len = 0; |
| mpd->map.m_flags = 0; |
| return 0; |
| out: |
| folio_batch_release(&fbatch); |
| return err; |
| } |
| |
| static int mpage_map_one_extent(handle_t *handle, struct mpage_da_data *mpd) |
| { |
| struct inode *inode = mpd->inode; |
| struct ext4_map_blocks *map = &mpd->map; |
| int get_blocks_flags; |
| int err, dioread_nolock; |
| |
| trace_ext4_da_write_pages_extent(inode, map); |
| /* |
| * Call ext4_map_blocks() to allocate any delayed allocation blocks, or |
| * to convert an unwritten extent to be initialized (in the case |
| * where we have written into one or more preallocated blocks). It is |
| * possible that we're going to need more metadata blocks than |
| * previously reserved. However we must not fail because we're in |
| * writeback and there is nothing we can do about it so it might result |
| * in data loss. So use reserved blocks to allocate metadata if |
| * possible. |
| * |
| * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE if |
| * the blocks in question are delalloc blocks. This indicates |
| * that the blocks and quotas has already been checked when |
| * the data was copied into the page cache. |
| */ |
| get_blocks_flags = EXT4_GET_BLOCKS_CREATE | |
| EXT4_GET_BLOCKS_METADATA_NOFAIL | |
| EXT4_GET_BLOCKS_IO_SUBMIT; |
| dioread_nolock = ext4_should_dioread_nolock(inode); |
| if (dioread_nolock) |
| get_blocks_flags |= EXT4_GET_BLOCKS_IO_CREATE_EXT; |
| if (map->m_flags & BIT(BH_Delay)) |
| get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE; |
| |
| err = ext4_map_blocks(handle, inode, map, get_blocks_flags); |
| if (err < 0) |
| return err; |
| if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) { |
| if (!mpd->io_submit.io_end->handle && |
| ext4_handle_valid(handle)) { |
| mpd->io_submit.io_end->handle = handle->h_rsv_handle; |
| handle->h_rsv_handle = NULL; |
| } |
| ext4_set_io_unwritten_flag(inode, mpd->io_submit.io_end); |
| } |
| |
| BUG_ON(map->m_len == 0); |
| return 0; |
| } |
| |
| /* |
| * mpage_map_and_submit_extent - map extent starting at mpd->lblk of length |
| * mpd->len and submit pages underlying it for IO |
| * |
| * @handle - handle for journal operations |
| * @mpd - extent to map |
| * @give_up_on_write - we set this to true iff there is a fatal error and there |
| * is no hope of writing the data. The caller should discard |
| * dirty pages to avoid infinite loops. |
| * |
| * The function maps extent starting at mpd->lblk of length mpd->len. If it is |
| * delayed, blocks are allocated, if it is unwritten, we may need to convert |
| * them to initialized or split the described range from larger unwritten |
| * extent. Note that we need not map all the described range since allocation |
| * can return less blocks or the range is covered by more unwritten extents. We |
| * cannot map more because we are limited by reserved transaction credits. On |
| * the other hand we always make sure that the last touched page is fully |
| * mapped so that it can be written out (and thus forward progress is |
| * guaranteed). After mapping we submit all mapped pages for IO. |
| */ |
| static int mpage_map_and_submit_extent(handle_t *handle, |
| struct mpage_da_data *mpd, |
| bool *give_up_on_write) |
| { |
| struct inode *inode = mpd->inode; |
| struct ext4_map_blocks *map = &mpd->map; |
| int err; |
| loff_t disksize; |
| int progress = 0; |
| ext4_io_end_t *io_end = mpd->io_submit.io_end; |
| struct ext4_io_end_vec *io_end_vec; |
| |
| io_end_vec = ext4_alloc_io_end_vec(io_end); |
| if (IS_ERR(io_end_vec)) |
| return PTR_ERR(io_end_vec); |
| io_end_vec->offset = ((loff_t)map->m_lblk) << inode->i_blkbits; |
| do { |
| err = mpage_map_one_extent(handle, mpd); |
| if (err < 0) { |
| struct super_block *sb = inode->i_sb; |
| |
| if (ext4_forced_shutdown(sb)) |
| goto invalidate_dirty_pages; |
| /* |
| * Let the uper layers retry transient errors. |
| * In the case of ENOSPC, if ext4_count_free_blocks() |
| * is non-zero, a commit should free up blocks. |
| */ |
| if ((err == -ENOMEM) || |
| (err == -ENOSPC && ext4_count_free_clusters(sb))) { |
| if (progress) |
| goto update_disksize; |
| return err; |
| } |
| ext4_msg(sb, KERN_CRIT, |
| "Delayed block allocation failed for " |
| "inode %lu at logical offset %llu with" |
| " max blocks %u with error %d", |
| inode->i_ino, |
| (unsigned long long)map->m_lblk, |
| (unsigned)map->m_len, -err); |
| ext4_msg(sb, KERN_CRIT, |
| "This should not happen!! Data will " |
| "be lost\n"); |
| if (err == -ENOSPC) |
| ext4_print_free_blocks(inode); |
| invalidate_dirty_pages: |
| *give_up_on_write = true; |
| return err; |
| } |
| progress = 1; |
| /* |
| * Update buffer state, submit mapped pages, and get us new |
| * extent to map |
| */ |
| err = mpage_map_and_submit_buffers(mpd); |
| if (err < 0) |
| goto update_disksize; |
| } while (map->m_len); |
| |
| update_disksize: |
| /* |
| * Update on-disk size after IO is submitted. Races with |
| * truncate are avoided by checking i_size under i_data_sem. |
| */ |
| disksize = ((loff_t)mpd->first_page) << PAGE_SHIFT; |
| if (disksize > READ_ONCE(EXT4_I(inode)->i_disksize)) { |
| int err2; |
| loff_t i_size; |
| |
| down_write(&EXT4_I(inode)->i_data_sem); |
| i_size = i_size_read(inode); |
| if (disksize > i_size) |
| disksize = i_size; |
| if (disksize > EXT4_I(inode)->i_disksize) |
| EXT4_I(inode)->i_disksize = disksize; |
| up_write(&EXT4_I(inode)->i_data_sem); |
| err2 = ext4_mark_inode_dirty(handle, inode); |
| if (err2) { |
| ext4_error_err(inode->i_sb, -err2, |
| "Failed to mark inode %lu dirty", |
| inode->i_ino); |
| } |
| if (!err) |
| err = err2; |
| } |
| return err; |
| } |
| |
| /* |
| * Calculate the total number of credits to reserve for one writepages |
| * iteration. This is called from ext4_writepages(). We map an extent of |
| * up to MAX_WRITEPAGES_EXTENT_LEN blocks and then we go on and finish mapping |
| * the last partial page. So in total we can map MAX_WRITEPAGES_EXTENT_LEN + |
| * bpp - 1 blocks in bpp different extents. |
| */ |
| static int ext4_da_writepages_trans_blocks(struct inode *inode) |
| { |
| int bpp = ext4_journal_blocks_per_page(inode); |
| |
| return ext4_meta_trans_blocks(inode, |
| MAX_WRITEPAGES_EXTENT_LEN + bpp - 1, bpp); |
| } |
| |
| static int ext4_journal_folio_buffers(handle_t *handle, struct folio *folio, |
| size_t len) |
| { |
| struct buffer_head *page_bufs = folio_buffers(folio); |
| struct inode *inode = folio->mapping->host; |
| int ret, err; |
| |
| ret = ext4_walk_page_buffers(handle, inode, page_bufs, 0, len, |
| NULL, do_journal_get_write_access); |
| err = ext4_walk_page_buffers(handle, inode, page_bufs, 0, len, |
| NULL, write_end_fn); |
| if (ret == 0) |
| ret = err; |
| err = ext4_jbd2_inode_add_write(handle, inode, folio_pos(folio), len); |
| if (ret == 0) |
| ret = err; |
| EXT4_I(inode)->i_datasync_tid = handle->h_transaction->t_tid; |
| |
| return ret; |
| } |
| |
| static int mpage_journal_page_buffers(handle_t *handle, |
| struct mpage_da_data *mpd, |
| struct folio *folio) |
| { |
| struct inode *inode = mpd->inode; |
| loff_t size = i_size_read(inode); |
| size_t len = folio_size(folio); |
| |
| folio_clear_checked(folio); |
| mpd->wbc->nr_to_write--; |
| |
| if (folio_pos(folio) + len > size && |
| !ext4_verity_in_progress(inode)) |
| len = size - folio_pos(folio); |
| |
| return ext4_journal_folio_buffers(handle, folio, len); |
| } |
| |
| /* |
| * mpage_prepare_extent_to_map - find & lock contiguous range of dirty pages |
| * needing mapping, submit mapped pages |
| * |
| * @mpd - where to look for pages |
| * |
| * Walk dirty pages in the mapping. If they are fully mapped, submit them for |
| * IO immediately. If we cannot map blocks, we submit just already mapped |
| * buffers in the page for IO and keep page dirty. When we can map blocks and |
| * we find a page which isn't mapped we start accumulating extent of buffers |
| * underlying these pages that needs mapping (formed by either delayed or |
| * unwritten buffers). We also lock the pages containing these buffers. The |
| * extent found is returned in @mpd structure (starting at mpd->lblk with |
| * length mpd->len blocks). |
| * |
| * Note that this function can attach bios to one io_end structure which are |
| * neither logically nor physically contiguous. Although it may seem as an |
| * unnecessary complication, it is actually inevitable in blocksize < pagesize |
| * case as we need to track IO to all buffers underlying a page in one io_end. |
| */ |
| static int mpage_prepare_extent_to_map(struct mpage_da_data *mpd) |
| { |
| struct address_space *mapping = mpd->inode->i_mapping; |
| struct folio_batch fbatch; |
| unsigned int nr_folios; |
| pgoff_t index = mpd->first_page; |
| pgoff_t end = mpd->last_page; |
| xa_mark_t tag; |
| int i, err = 0; |
| int blkbits = mpd->inode->i_blkbits; |
| ext4_lblk_t lblk; |
| struct buffer_head *head; |
| handle_t *handle = NULL; |
| int bpp = ext4_journal_blocks_per_page(mpd->inode); |
| |
| if (mpd->wbc->sync_mode == WB_SYNC_ALL || mpd->wbc->tagged_writepages) |
| tag = PAGECACHE_TAG_TOWRITE; |
| else |
| tag = PAGECACHE_TAG_DIRTY; |
| |
| mpd->map.m_len = 0; |
| mpd->next_page = index; |
| if (ext4_should_journal_data(mpd->inode)) { |
| handle = ext4_journal_start(mpd->inode, EXT4_HT_WRITE_PAGE, |
| bpp); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| } |
| folio_batch_init(&fbatch); |
| while (index <= end) { |
| nr_folios = filemap_get_folios_tag(mapping, &index, end, |
| tag, &fbatch); |
| if (nr_folios == 0) |
| break; |
| |
| for (i = 0; i < nr_folios; i++) { |
| struct folio *folio = fbatch.folios[i]; |
| |
| /* |
| * Accumulated enough dirty pages? This doesn't apply |
| * to WB_SYNC_ALL mode. For integrity sync we have to |
| * keep going because someone may be concurrently |
| * dirtying pages, and we might have synced a lot of |
| * newly appeared dirty pages, but have not synced all |
| * of the old dirty pages. |
| */ |
| if (mpd->wbc->sync_mode == WB_SYNC_NONE && |
| mpd->wbc->nr_to_write <= |
| mpd->map.m_len >> (PAGE_SHIFT - blkbits)) |
| goto out; |
| |
| /* If we can't merge this page, we are done. */ |
| if (mpd->map.m_len > 0 && mpd->next_page != folio->index) |
| goto out; |
| |
| if (handle) { |
| err = ext4_journal_ensure_credits(handle, bpp, |
| 0); |
| if (err < 0) |
| goto out; |
| } |
| |
| folio_lock(folio); |
| /* |
| * If the page is no longer dirty, or its mapping no |
| * longer corresponds to inode we are writing (which |
| * means it has been truncated or invalidated), or the |
| * page is already under writeback and we are not doing |
| * a data integrity writeback, skip the page |
| */ |
| if (!folio_test_dirty(folio) || |
| (folio_test_writeback(folio) && |
| (mpd->wbc->sync_mode == WB_SYNC_NONE)) || |
| unlikely(folio->mapping != mapping)) { |
| folio_unlock(folio); |
| continue; |
| } |
| |
| folio_wait_writeback(folio); |
| BUG_ON(folio_test_writeback(folio)); |
| |
| /* |
| * Should never happen but for buggy code in |
| * other subsystems that call |
| * set_page_dirty() without properly warning |
| * the file system first. See [1] for more |
| * information. |
| * |
| * [1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz |
| */ |
| if (!folio_buffers(folio)) { |
| ext4_warning_inode(mpd->inode, "page %lu does not have buffers attached", folio->index); |
| folio_clear_dirty(folio); |
| folio_unlock(folio); |
| continue; |
| } |
| |
| if (mpd->map.m_len == 0) |
| mpd->first_page = folio->index; |
| mpd->next_page = folio_next_index(folio); |
| /* |
| * Writeout when we cannot modify metadata is simple. |
| * Just submit the page. For data=journal mode we |
| * first handle writeout of the page for checkpoint and |
| * only after that handle delayed page dirtying. This |
| * makes sure current data is checkpointed to the final |
| * location before possibly journalling it again which |
| * is desirable when the page is frequently dirtied |
| * through a pin. |
| */ |
| if (!mpd->can_map) { |
| err = mpage_submit_folio(mpd, folio); |
| if (err < 0) |
| goto out; |
| /* Pending dirtying of journalled data? */ |
| if (folio_test_checked(folio)) { |
| err = mpage_journal_page_buffers(handle, |
| mpd, folio); |
| if (err < 0) |
| goto out; |
| mpd->journalled_more_data = 1; |
| } |
| mpage_folio_done(mpd, folio); |
| } else { |
| /* Add all dirty buffers to mpd */ |
| lblk = ((ext4_lblk_t)folio->index) << |
| (PAGE_SHIFT - blkbits); |
| head = folio_buffers(folio); |
| err = mpage_process_page_bufs(mpd, head, head, |
| lblk); |
| if (err <= 0) |
| goto out; |
| err = 0; |
| } |
| } |
| folio_batch_release(&fbatch); |
| cond_resched(); |
| } |
| mpd->scanned_until_end = 1; |
| if (handle) |
| ext4_journal_stop(handle); |
| return 0; |
| out: |
| folio_batch_release(&fbatch); |
| if (handle) |
| ext4_journal_stop(handle); |
| return err; |
| } |
| |
| static int ext4_do_writepages(struct mpage_da_data *mpd) |
| { |
| struct writeback_control *wbc = mpd->wbc; |
| pgoff_t writeback_index = 0; |
| long nr_to_write = wbc->nr_to_write; |
| int range_whole = 0; |
| int cycled = 1; |
| handle_t *handle = NULL; |
| struct inode *inode = mpd->inode; |
| struct address_space *mapping = inode->i_mapping; |
| int needed_blocks, rsv_blocks = 0, ret = 0; |
| struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb); |
| struct blk_plug plug; |
| bool give_up_on_write = false; |
| |
| trace_ext4_writepages(inode, wbc); |
| |
| /* |
| * No pages to write? This is mainly a kludge to avoid starting |
| * a transaction for special inodes like journal inode on last iput() |
| * because that could violate lock ordering on umount |
| */ |
| if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) |
| goto out_writepages; |
| |
| /* |
| * If the filesystem has aborted, it is read-only, so return |
| * right away instead of dumping stack traces later on that |
| * will obscure the real source of the problem. We test |
| * fs shutdown state instead of sb->s_flag's SB_RDONLY because |
| * the latter could be true if the filesystem is mounted |
| * read-only, and in that case, ext4_writepages should |
| * *never* be called, so if that ever happens, we would want |
| * the stack trace. |
| */ |
| if (unlikely(ext4_forced_shutdown(mapping->host->i_sb))) { |
| ret = -EROFS; |
| goto out_writepages; |
| } |
| |
| /* |
| * If we have inline data and arrive here, it means that |
| * we will soon create the block for the 1st page, so |
| * we'd better clear the inline data here. |
| */ |
| if (ext4_has_inline_data(inode)) { |
| /* Just inode will be modified... */ |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, 1); |
| if (IS_ERR(handle)) { |
| ret = PTR_ERR(handle); |
| goto out_writepages; |
| } |
| BUG_ON(ext4_test_inode_state(inode, |
| EXT4_STATE_MAY_INLINE_DATA)); |
| ext4_destroy_inline_data(handle, inode); |
| ext4_journal_stop(handle); |
| } |
| |
| /* |
| * data=journal mode does not do delalloc so we just need to writeout / |
| * journal already mapped buffers. On the other hand we need to commit |
| * transaction to make data stable. We expect all the data to be |
| * already in the journal (the only exception are DMA pinned pages |
| * dirtied behind our back) so we commit transaction here and run the |
| * writeback loop to checkpoint them. The checkpointing is not actually |
| * necessary to make data persistent *but* quite a few places (extent |
| * shifting operations, fsverity, ...) depend on being able to drop |
| * pagecache pages after calling filemap_write_and_wait() and for that |
| * checkpointing needs to happen. |
| */ |
| if (ext4_should_journal_data(inode)) { |
| mpd->can_map = 0; |
| if (wbc->sync_mode == WB_SYNC_ALL) |
| ext4_fc_commit(sbi->s_journal, |
| EXT4_I(inode)->i_datasync_tid); |
| } |
| mpd->journalled_more_data = 0; |
| |
| if (ext4_should_dioread_nolock(inode)) { |
| /* |
| * We may need to convert up to one extent per block in |
| * the page and we may dirty the inode. |
| */ |
| rsv_blocks = 1 + ext4_chunk_trans_blocks(inode, |
| PAGE_SIZE >> inode->i_blkbits); |
| } |
| |
| if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) |
| range_whole = 1; |
| |
| if (wbc->range_cyclic) { |
| writeback_index = mapping->writeback_index; |
| if (writeback_index) |
| cycled = 0; |
| mpd->first_page = writeback_index; |
| mpd->last_page = -1; |
| } else { |
| mpd->first_page = wbc->range_start >> PAGE_SHIFT; |
| mpd->last_page = wbc->range_end >> PAGE_SHIFT; |
| } |
| |
| ext4_io_submit_init(&mpd->io_submit, wbc); |
| retry: |
| if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages) |
| tag_pages_for_writeback(mapping, mpd->first_page, |
| mpd->last_page); |
| blk_start_plug(&plug); |
| |
| /* |
| * First writeback pages that don't need mapping - we can avoid |
| * starting a transaction unnecessarily and also avoid being blocked |
| * in the block layer on device congestion while having transaction |
| * started. |
| */ |
| mpd->do_map = 0; |
| mpd->scanned_until_end = 0; |
| mpd->io_submit.io_end = ext4_init_io_end(inode, GFP_KERNEL); |
| if (!mpd->io_submit.io_end) { |
| ret = -ENOMEM; |
| goto unplug; |
| } |
| ret = mpage_prepare_extent_to_map(mpd); |
| /* Unlock pages we didn't use */ |
| mpage_release_unused_pages(mpd, false); |
| /* Submit prepared bio */ |
| ext4_io_submit(&mpd->io_submit); |
| ext4_put_io_end_defer(mpd->io_submit.io_end); |
| mpd->io_submit.io_end = NULL; |
| if (ret < 0) |
| goto unplug; |
| |
| while (!mpd->scanned_until_end && wbc->nr_to_write > 0) { |
| /* For each extent of pages we use new io_end */ |
| mpd->io_submit.io_end = ext4_init_io_end(inode, GFP_KERNEL); |
| if (!mpd->io_submit.io_end) { |
| ret = -ENOMEM; |
| break; |
| } |
| |
| WARN_ON_ONCE(!mpd->can_map); |
| /* |
| * We have two constraints: We find one extent to map and we |
| * must always write out whole page (makes a difference when |
| * blocksize < pagesize) so that we don't block on IO when we |
| * try to write out the rest of the page. Journalled mode is |
| * not supported by delalloc. |
| */ |
| BUG_ON(ext4_should_journal_data(inode)); |
| needed_blocks = ext4_da_writepages_trans_blocks(inode); |
| |
| /* start a new transaction */ |
| handle = ext4_journal_start_with_reserve(inode, |
| EXT4_HT_WRITE_PAGE, needed_blocks, rsv_blocks); |
| if (IS_ERR(handle)) { |
| ret = PTR_ERR(handle); |
| ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: " |
| "%ld pages, ino %lu; err %d", __func__, |
| wbc->nr_to_write, inode->i_ino, ret); |
| /* Release allocated io_end */ |
| ext4_put_io_end(mpd->io_submit.io_end); |
| mpd->io_submit.io_end = NULL; |
| break; |
| } |
| mpd->do_map = 1; |
| |
| trace_ext4_da_write_pages(inode, mpd->first_page, wbc); |
| ret = mpage_prepare_extent_to_map(mpd); |
| if (!ret && mpd->map.m_len) |
| ret = mpage_map_and_submit_extent(handle, mpd, |
| &give_up_on_write); |
| /* |
| * Caution: If the handle is synchronous, |
| * ext4_journal_stop() can wait for transaction commit |
| * to finish which may depend on writeback of pages to |
| * complete or on page lock to be released. In that |
| * case, we have to wait until after we have |
| * submitted all the IO, released page locks we hold, |
| * and dropped io_end reference (for extent conversion |
| * to be able to complete) before stopping the handle. |
| */ |
| if (!ext4_handle_valid(handle) || handle->h_sync == 0) { |
| ext4_journal_stop(handle); |
| handle = NULL; |
| mpd->do_map = 0; |
| } |
| /* Unlock pages we didn't use */ |
| mpage_release_unused_pages(mpd, give_up_on_write); |
| /* Submit prepared bio */ |
| ext4_io_submit(&mpd->io_submit); |
| |
| /* |
| * Drop our io_end reference we got from init. We have |
| * to be careful and use deferred io_end finishing if |
| * we are still holding the transaction as we can |
| * release the last reference to io_end which may end |
| * up doing unwritten extent conversion. |
| */ |
| if (handle) { |
| ext4_put_io_end_defer(mpd->io_submit.io_end); |
| ext4_journal_stop(handle); |
| } else |
| ext4_put_io_end(mpd->io_submit.io_end); |
| mpd->io_submit.io_end = NULL; |
| |
| if (ret == -ENOSPC && sbi->s_journal) { |
| /* |
| * Commit the transaction which would |
| * free blocks released in the transaction |
| * and try again |
| */ |
| jbd2_journal_force_commit_nested(sbi->s_journal); |
| ret = 0; |
| continue; |
| } |
| /* Fatal error - ENOMEM, EIO... */ |
| if (ret) |
| break; |
| } |
| unplug: |
| blk_finish_plug(&plug); |
| if (!ret && !cycled && wbc->nr_to_write > 0) { |
| cycled = 1; |
| mpd->last_page = writeback_index - 1; |
| mpd->first_page = 0; |
| goto retry; |
| } |
| |
| /* Update index */ |
| if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) |
| /* |
| * Set the writeback_index so that range_cyclic |
| * mode will write it back later |
| */ |
| mapping->writeback_index = mpd->first_page; |
| |
| out_writepages: |
| trace_ext4_writepages_result(inode, wbc, ret, |
| nr_to_write - wbc->nr_to_write); |
| return ret; |
| } |
| |
| static int ext4_writepages(struct address_space *mapping, |
| struct writeback_control *wbc) |
| { |
| struct super_block *sb = mapping->host->i_sb; |
| struct mpage_da_data mpd = { |
| .inode = mapping->host, |
| .wbc = wbc, |
| .can_map = 1, |
| }; |
| int ret; |
| int alloc_ctx; |
| |
| if (unlikely(ext4_forced_shutdown(sb))) |
| return -EIO; |
| |
| alloc_ctx = ext4_writepages_down_read(sb); |
| ret = ext4_do_writepages(&mpd); |
| /* |
| * For data=journal writeback we could have come across pages marked |
| * for delayed dirtying (PageChecked) which were just added to the |
| * running transaction. Try once more to get them to stable storage. |
| */ |
| if (!ret && mpd.journalled_more_data) |
| ret = ext4_do_writepages(&mpd); |
| ext4_writepages_up_read(sb, alloc_ctx); |
| |
| return ret; |
| } |
| |
| int ext4_normal_submit_inode_data_buffers(struct jbd2_inode *jinode) |
| { |
| struct writeback_control wbc = { |
| .sync_mode = WB_SYNC_ALL, |
| .nr_to_write = LONG_MAX, |
| .range_start = jinode->i_dirty_start, |
| .range_end = jinode->i_dirty_end, |
| }; |
| struct mpage_da_data mpd = { |
| .inode = jinode->i_vfs_inode, |
| .wbc = &wbc, |
| .can_map = 0, |
| }; |
| return ext4_do_writepages(&mpd); |
| } |
| |
| static int ext4_dax_writepages(struct address_space *mapping, |
| struct writeback_control *wbc) |
| { |
| int ret; |
| long nr_to_write = wbc->nr_to_write; |
| struct inode *inode = mapping->host; |
| int alloc_ctx; |
| |
| if (unlikely(ext4_forced_shutdown(inode->i_sb))) |
| return -EIO; |
| |
| alloc_ctx = ext4_writepages_down_read(inode->i_sb); |
| trace_ext4_writepages(inode, wbc); |
| |
| ret = dax_writeback_mapping_range(mapping, |
| EXT4_SB(inode->i_sb)->s_daxdev, wbc); |
| trace_ext4_writepages_result(inode, wbc, ret, |
| nr_to_write - wbc->nr_to_write); |
| ext4_writepages_up_read(inode->i_sb, alloc_ctx); |
| return ret; |
| } |
| |
| static int ext4_nonda_switch(struct super_block *sb) |
| { |
| s64 free_clusters, dirty_clusters; |
| struct ext4_sb_info *sbi = EXT4_SB(sb); |
| |
| /* |
| * switch to non delalloc mode if we are running low |
| * on free block. The free block accounting via percpu |
| * counters can get slightly wrong with percpu_counter_batch getting |
| * accumulated on each CPU without updating global counters |
| * Delalloc need an accurate free block accounting. So switch |
| * to non delalloc when we are near to error range. |
| */ |
| free_clusters = |
| percpu_counter_read_positive(&sbi->s_freeclusters_counter); |
| dirty_clusters = |
| percpu_counter_read_positive(&sbi->s_dirtyclusters_counter); |
| /* |
| * Start pushing delalloc when 1/2 of free blocks are dirty. |
| */ |
| if (dirty_clusters && (free_clusters < 2 * dirty_clusters)) |
| try_to_writeback_inodes_sb(sb, WB_REASON_FS_FREE_SPACE); |
| |
| if (2 * free_clusters < 3 * dirty_clusters || |
| free_clusters < (dirty_clusters + EXT4_FREECLUSTERS_WATERMARK)) { |
| /* |
| * free block count is less than 150% of dirty blocks |
| * or free blocks is less than watermark |
| */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int ext4_da_write_begin(struct file *file, struct address_space *mapping, |
| loff_t pos, unsigned len, |
| struct page **pagep, void **fsdata) |
| { |
| int ret, retries = 0; |
| struct folio *folio; |
| pgoff_t index; |
| struct inode *inode = mapping->host; |
| |
| if (unlikely(ext4_forced_shutdown(inode->i_sb))) |
| return -EIO; |
| |
| index = pos >> PAGE_SHIFT; |
| |
| if (ext4_nonda_switch(inode->i_sb) || ext4_verity_in_progress(inode)) { |
| *fsdata = (void *)FALL_BACK_TO_NONDELALLOC; |
| return ext4_write_begin(file, mapping, pos, |
| len, pagep, fsdata); |
| } |
| *fsdata = (void *)0; |
| trace_ext4_da_write_begin(inode, pos, len); |
| |
| if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) { |
| ret = ext4_da_write_inline_data_begin(mapping, inode, pos, len, |
| pagep, fsdata); |
| if (ret < 0) |
| return ret; |
| if (ret == 1) |
| return 0; |
| } |
| |
| retry: |
| folio = __filemap_get_folio(mapping, index, FGP_WRITEBEGIN, |
| mapping_gfp_mask(mapping)); |
| if (IS_ERR(folio)) |
| return PTR_ERR(folio); |
| |
| /* In case writeback began while the folio was unlocked */ |
| folio_wait_stable(folio); |
| |
| #ifdef CONFIG_FS_ENCRYPTION |
| ret = ext4_block_write_begin(folio, pos, len, ext4_da_get_block_prep); |
| #else |
| ret = __block_write_begin(&folio->page, pos, len, ext4_da_get_block_prep); |
| #endif |
| if (ret < 0) { |
| folio_unlock(folio); |
| folio_put(folio); |
| /* |
| * block_write_begin may have instantiated a few blocks |
| * outside i_size. Trim these off again. Don't need |
| * i_size_read because we hold inode lock. |
| */ |
| if (pos + len > inode->i_size) |
| ext4_truncate_failed_write(inode); |
| |
| if (ret == -ENOSPC && |
| ext4_should_retry_alloc(inode->i_sb, &retries)) |
| goto retry; |
| return ret; |
| } |
| |
| *pagep = &folio->page; |
| return ret; |
| } |
| |
| /* |
| * Check if we should update i_disksize |
| * when write to the end of file but not require block allocation |
| */ |
| static int ext4_da_should_update_i_disksize(struct folio *folio, |
| unsigned long offset) |
| { |
| struct buffer_head *bh; |
| struct inode *inode = folio->mapping->host; |
| unsigned int idx; |
| int i; |
| |
| bh = folio_buffers(folio); |
| idx = offset >> inode->i_blkbits; |
| |
| for (i = 0; i < idx; i++) |
| bh = bh->b_this_page; |
| |
| if (!buffer_mapped(bh) || (buffer_delay(bh)) || buffer_unwritten(bh)) |
| return 0; |
| return 1; |
| } |
| |
| static int ext4_da_do_write_end(struct address_space *mapping, |
| loff_t pos, unsigned len, unsigned copied, |
| struct folio *folio) |
| { |
| struct inode *inode = mapping->host; |
| loff_t old_size = inode->i_size; |
| bool disksize_changed = false; |
| loff_t new_i_size; |
| |
| /* |
| * block_write_end() will mark the inode as dirty with I_DIRTY_PAGES |
| * flag, which all that's needed to trigger page writeback. |
| */ |
| copied = block_write_end(NULL, mapping, pos, len, copied, |
| &folio->page, NULL); |
| new_i_size = pos + copied; |
| |
| /* |
| * It's important to update i_size while still holding folio lock, |
| * because folio writeout could otherwise come in and zero beyond |
| * i_size. |
| * |
| * Since we are holding inode lock, we are sure i_disksize <= |
| * i_size. We also know that if i_disksize < i_size, there are |
| * delalloc writes pending in the range up to i_size. If the end of |
| * the current write is <= i_size, there's no need to touch |
| * i_disksize since writeback will push i_disksize up to i_size |
| * eventually. If the end of the current write is > i_size and |
| * inside an allocated block which ext4_da_should_update_i_disksize() |
| * checked, we need to update i_disksize here as certain |
| * ext4_writepages() paths not allocating blocks and update i_disksize. |
| */ |
| if (new_i_size > inode->i_size) { |
| unsigned long end; |
| |
| i_size_write(inode, new_i_size); |
| end = (new_i_size - 1) & (PAGE_SIZE - 1); |
| if (copied && ext4_da_should_update_i_disksize(folio, end)) { |
| ext4_update_i_disksize(inode, new_i_size); |
| disksize_changed = true; |
| } |
| } |
| |
| folio_unlock(folio); |
| folio_put(folio); |
| |
| if (old_size < pos) |
| pagecache_isize_extended(inode, old_size, pos); |
| |
| if (disksize_changed) { |
| handle_t *handle; |
| |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, 2); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| ext4_mark_inode_dirty(handle, inode); |
| ext4_journal_stop(handle); |
| } |
| |
| return copied; |
| } |
| |
| static int ext4_da_write_end(struct file *file, |
| struct address_space *mapping, |
| loff_t pos, unsigned len, unsigned copied, |
| struct page *page, void *fsdata) |
| { |
| struct inode *inode = mapping->host; |
| int write_mode = (int)(unsigned long)fsdata; |
| struct folio *folio = page_folio(page); |
| |
| if (write_mode == FALL_BACK_TO_NONDELALLOC) |
| return ext4_write_end(file, mapping, pos, |
| len, copied, &folio->page, fsdata); |
| |
| trace_ext4_da_write_end(inode, pos, len, copied); |
| |
| if (write_mode != CONVERT_INLINE_DATA && |
| ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && |
| ext4_has_inline_data(inode)) |
| return ext4_write_inline_data_end(inode, pos, len, copied, |
| folio); |
| |
| if (unlikely(copied < len) && !folio_test_uptodate(folio)) |
| copied = 0; |
| |
| return ext4_da_do_write_end(mapping, pos, len, copied, folio); |
| } |
| |
| /* |
| * Force all delayed allocation blocks to be allocated for a given inode. |
| */ |
| int ext4_alloc_da_blocks(struct inode *inode) |
| { |
| trace_ext4_alloc_da_blocks(inode); |
| |
| if (!EXT4_I(inode)->i_reserved_data_blocks) |
| return 0; |
| |
| /* |
| * We do something simple for now. The filemap_flush() will |
| * also start triggering a write of the data blocks, which is |
| * not strictly speaking necessary (and for users of |
| * laptop_mode, not even desirable). However, to do otherwise |
| * would require replicating code paths in: |
| * |
| * ext4_writepages() -> |
| * write_cache_pages() ---> (via passed in callback function) |
| * __mpage_da_writepage() --> |
| * mpage_add_bh_to_extent() |
| * mpage_da_map_blocks() |
| * |
| * The problem is that write_cache_pages(), located in |
| * mm/page-writeback.c, marks pages clean in preparation for |
| * doing I/O, which is not desirable if we're not planning on |
| * doing I/O at all. |
| * |
| * We could call write_cache_pages(), and then redirty all of |
| * the pages by calling redirty_page_for_writepage() but that |
| * would be ugly in the extreme. So instead we would need to |
| * replicate parts of the code in the above functions, |
| * simplifying them because we wouldn't actually intend to |
| * write out the pages, but rather only collect contiguous |
| * logical block extents, call the multi-block allocator, and |
| * then update the buffer heads with the block allocations. |
| * |
| * For now, though, we'll cheat by calling filemap_flush(), |
| * which will map the blocks, and start the I/O, but not |
| * actually wait for the I/O to complete. |
| */ |
| return filemap_flush(inode->i_mapping); |
| } |
| |
| /* |
| * bmap() is special. It gets used by applications such as lilo and by |
| * the swapper to find the on-disk block of a specific piece of data. |
| * |
| * Naturally, this is dangerous if the block concerned is still in the |
| * journal. If somebody makes a swapfile on an ext4 data-journaling |
| * filesystem and enables swap, then they may get a nasty shock when the |
| * data getting swapped to that swapfile suddenly gets overwritten by |
| * the original zero's written out previously to the journal and |
| * awaiting writeback in the kernel's buffer cache. |
| * |
| * So, if we see any bmap calls here on a modified, data-journaled file, |
| * take extra steps to flush any blocks which might be in the cache. |
| */ |
| static sector_t ext4_bmap(struct address_space *mapping, sector_t block) |
| { |
| struct inode *inode = mapping->host; |
| sector_t ret = 0; |
| |
| inode_lock_shared(inode); |
| /* |
| * We can get here for an inline file via the FIBMAP ioctl |
| */ |
| if (ext4_has_inline_data(inode)) |
| goto out; |
| |
| if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY) && |
| (test_opt(inode->i_sb, DELALLOC) || |
| ext4_should_journal_data(inode))) { |
| /* |
| * With delalloc or journalled data we want to sync the file so |
| * that we can make sure we allocate blocks for file and data |
| * is in place for the user to see it |
| */ |
| filemap_write_and_wait(mapping); |
| } |
| |
| ret = iomap_bmap(mapping, block, &ext4_iomap_ops); |
| |
| out: |
| inode_unlock_shared(inode); |
| return ret; |
| } |
| |
| static int ext4_read_folio(struct file *file, struct folio *folio) |
| { |
| int ret = -EAGAIN; |
| struct inode *inode = folio->mapping->host; |
| |
| trace_ext4_read_folio(inode, folio); |
| |
| if (ext4_has_inline_data(inode)) |
| ret = ext4_readpage_inline(inode, folio); |
| |
| if (ret == -EAGAIN) |
| return ext4_mpage_readpages(inode, NULL, folio); |
| |
| return ret; |
| } |
| |
| static void ext4_readahead(struct readahead_control *rac) |
| { |
| struct inode *inode = rac->mapping->host; |
| |
| /* If the file has inline data, no need to do readahead. */ |
| if (ext4_has_inline_data(inode)) |
| return; |
| |
| ext4_mpage_readpages(inode, rac, NULL); |
| } |
| |
| static void ext4_invalidate_folio(struct folio *folio, size_t offset, |
| size_t length) |
| { |
| trace_ext4_invalidate_folio(folio, offset, length); |
| |
| /* No journalling happens on data buffers when this function is used */ |
| WARN_ON(folio_buffers(folio) && buffer_jbd(folio_buffers(folio))); |
| |
| block_invalidate_folio(folio, offset, length); |
| } |
| |
| static int __ext4_journalled_invalidate_folio(struct folio *folio, |
| size_t offset, size_t length) |
| { |
| journal_t *journal = EXT4_JOURNAL(folio->mapping->host); |
| |
| trace_ext4_journalled_invalidate_folio(folio, offset, length); |
| |
| /* |
| * If it's a full truncate we just forget about the pending dirtying |
| */ |
| if (offset == 0 && length == folio_size(folio)) |
| folio_clear_checked(folio); |
| |
| return jbd2_journal_invalidate_folio(journal, folio, offset, length); |
| } |
| |
| /* Wrapper for aops... */ |
| static void ext4_journalled_invalidate_folio(struct folio *folio, |
| size_t offset, |
| size_t length) |
| { |
| WARN_ON(__ext4_journalled_invalidate_folio(folio, offset, length) < 0); |
| } |
| |
| static bool ext4_release_folio(struct folio *folio, gfp_t wait) |
| { |
| struct inode *inode = folio->mapping->host; |
| journal_t *journal = EXT4_JOURNAL(inode); |
| |
| trace_ext4_release_folio(inode, folio); |
| |
| /* Page has dirty journalled data -> cannot release */ |
| if (folio_test_checked(folio)) |
| return false; |
| if (journal) |
| return jbd2_journal_try_to_free_buffers(journal, folio); |
| else |
| return try_to_free_buffers(folio); |
| } |
| |
| static bool ext4_inode_datasync_dirty(struct inode *inode) |
| { |
| journal_t *journal = EXT4_SB(inode->i_sb)->s_journal; |
| |
| if (journal) { |
| if (jbd2_transaction_committed(journal, |
| EXT4_I(inode)->i_datasync_tid)) |
| return false; |
| if (test_opt2(inode->i_sb, JOURNAL_FAST_COMMIT)) |
| return !list_empty(&EXT4_I(inode)->i_fc_list); |
| return true; |
| } |
| |
| /* Any metadata buffers to write? */ |
| if (!list_empty(&inode->i_mapping->i_private_list)) |
| return true; |
| return inode->i_state & I_DIRTY_DATASYNC; |
| } |
| |
| static void ext4_set_iomap(struct inode *inode, struct iomap *iomap, |
| struct ext4_map_blocks *map, loff_t offset, |
| loff_t length, unsigned int flags) |
| { |
| u8 blkbits = inode->i_blkbits; |
| |
| /* |
| * Writes that span EOF might trigger an I/O size update on completion, |
| * so consider them to be dirty for the purpose of O_DSYNC, even if |
| * there is no other metadata changes being made or are pending. |
| */ |
| iomap->flags = 0; |
| if (ext4_inode_datasync_dirty(inode) || |
| offset + length > i_size_read(inode)) |
| iomap->flags |= IOMAP_F_DIRTY; |
| |
| if (map->m_flags & EXT4_MAP_NEW) |
| iomap->flags |= IOMAP_F_NEW; |
| |
| if (flags & IOMAP_DAX) |
| iomap->dax_dev = EXT4_SB(inode->i_sb)->s_daxdev; |
| else |
| iomap->bdev = inode->i_sb->s_bdev; |
| iomap->offset = (u64) map->m_lblk << blkbits; |
| iomap->length = (u64) map->m_len << blkbits; |
| |
| if ((map->m_flags & EXT4_MAP_MAPPED) && |
| !ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| iomap->flags |= IOMAP_F_MERGED; |
| |
| /* |
| * Flags passed to ext4_map_blocks() for direct I/O writes can result |
| * in m_flags having both EXT4_MAP_MAPPED and EXT4_MAP_UNWRITTEN bits |
| * set. In order for any allocated unwritten extents to be converted |
| * into written extents correctly within the ->end_io() handler, we |
| * need to ensure that the iomap->type is set appropriately. Hence, the |
| * reason why we need to check whether the EXT4_MAP_UNWRITTEN bit has |
| * been set first. |
| */ |
| if (map->m_flags & EXT4_MAP_UNWRITTEN) { |
| iomap->type = IOMAP_UNWRITTEN; |
| iomap->addr = (u64) map->m_pblk << blkbits; |
| if (flags & IOMAP_DAX) |
| iomap->addr += EXT4_SB(inode->i_sb)->s_dax_part_off; |
| } else if (map->m_flags & EXT4_MAP_MAPPED) { |
| iomap->type = IOMAP_MAPPED; |
| iomap->addr = (u64) map->m_pblk << blkbits; |
| if (flags & IOMAP_DAX) |
| iomap->addr += EXT4_SB(inode->i_sb)->s_dax_part_off; |
| } else if (map->m_flags & EXT4_MAP_DELAYED) { |
| iomap->type = IOMAP_DELALLOC; |
| iomap->addr = IOMAP_NULL_ADDR; |
| } else { |
| iomap->type = IOMAP_HOLE; |
| iomap->addr = IOMAP_NULL_ADDR; |
| } |
| } |
| |
| static int ext4_iomap_alloc(struct inode *inode, struct ext4_map_blocks *map, |
| unsigned int flags) |
| { |
| handle_t *handle; |
| u8 blkbits = inode->i_blkbits; |
| int ret, dio_credits, m_flags = 0, retries = 0; |
| |
| /* |
| * Trim the mapping request to the maximum value that we can map at |
| * once for direct I/O. |
| */ |
| if (map->m_len > DIO_MAX_BLOCKS) |
| map->m_len = DIO_MAX_BLOCKS; |
| dio_credits = ext4_chunk_trans_blocks(inode, map->m_len); |
| |
| retry: |
| /* |
| * Either we allocate blocks and then don't get an unwritten extent, so |
| * in that case we have reserved enough credits. Or, the blocks are |
| * already allocated and unwritten. In that case, the extent conversion |
| * fits into the credits as well. |
| */ |
| handle = ext4_journal_start(inode, EXT4_HT_MAP_BLOCKS, dio_credits); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| /* |
| * DAX and direct I/O are the only two operations that are currently |
| * supported with IOMAP_WRITE. |
| */ |
| WARN_ON(!(flags & (IOMAP_DAX | IOMAP_DIRECT))); |
| if (flags & IOMAP_DAX) |
| m_flags = EXT4_GET_BLOCKS_CREATE_ZERO; |
| /* |
| * We use i_size instead of i_disksize here because delalloc writeback |
| * can complete at any point during the I/O and subsequently push the |
| * i_disksize out to i_size. This could be beyond where direct I/O is |
| * happening and thus expose allocated blocks to direct I/O reads. |
| */ |
| else if (((loff_t)map->m_lblk << blkbits) >= i_size_read(inode)) |
| m_flags = EXT4_GET_BLOCKS_CREATE; |
| else if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| m_flags = EXT4_GET_BLOCKS_IO_CREATE_EXT; |
| |
| ret = ext4_map_blocks(handle, inode, map, m_flags); |
| |
| /* |
| * We cannot fill holes in indirect tree based inodes as that could |
| * expose stale data in the case of a crash. Use the magic error code |
| * to fallback to buffered I/O. |
| */ |
| if (!m_flags && !ret) |
| ret = -ENOTBLK; |
| |
| ext4_journal_stop(handle); |
| if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) |
| goto retry; |
| |
| return ret; |
| } |
| |
| |
| static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length, |
| unsigned flags, struct iomap *iomap, struct iomap *srcmap) |
| { |
| int ret; |
| struct ext4_map_blocks map; |
| u8 blkbits = inode->i_blkbits; |
| |
| if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK) |
| return -EINVAL; |
| |
| if (WARN_ON_ONCE(ext4_has_inline_data(inode))) |
| return -ERANGE; |
| |
| /* |
| * Calculate the first and last logical blocks respectively. |
| */ |
| map.m_lblk = offset >> blkbits; |
| map.m_len = min_t(loff_t, (offset + length - 1) >> blkbits, |
| EXT4_MAX_LOGICAL_BLOCK) - map.m_lblk + 1; |
| |
| if (flags & IOMAP_WRITE) { |
| /* |
| * We check here if the blocks are already allocated, then we |
| * don't need to start a journal txn and we can directly return |
| * the mapping information. This could boost performance |
| * especially in multi-threaded overwrite requests. |
| */ |
| if (offset + length <= i_size_read(inode)) { |
| ret = ext4_map_blocks(NULL, inode, &map, 0); |
| if (ret > 0 && (map.m_flags & EXT4_MAP_MAPPED)) |
| goto out; |
| } |
| ret = ext4_iomap_alloc(inode, &map, flags); |
| } else { |
| ret = ext4_map_blocks(NULL, inode, &map, 0); |
| } |
| |
| if (ret < 0) |
| return ret; |
| out: |
| /* |
| * When inline encryption is enabled, sometimes I/O to an encrypted file |
| * has to be broken up to guarantee DUN contiguity. Handle this by |
| * limiting the length of the mapping returned. |
| */ |
| map.m_len = fscrypt_limit_io_blocks(inode, map.m_lblk, map.m_len); |
| |
| ext4_set_iomap(inode, iomap, &map, offset, length, flags); |
| |
| return 0; |
| } |
| |
| static int ext4_iomap_overwrite_begin(struct inode *inode, loff_t offset, |
| loff_t length, unsigned flags, struct iomap *iomap, |
| struct iomap *srcmap) |
| { |
| int ret; |
| |
| /* |
| * Even for writes we don't need to allocate blocks, so just pretend |
| * we are reading to save overhead of starting a transaction. |
| */ |
| flags &= ~IOMAP_WRITE; |
| ret = ext4_iomap_begin(inode, offset, length, flags, iomap, srcmap); |
| WARN_ON_ONCE(!ret && iomap->type != IOMAP_MAPPED); |
| return ret; |
| } |
| |
| static int ext4_iomap_end(struct inode *inode, loff_t offset, loff_t length, |
| ssize_t written, unsigned flags, struct iomap *iomap) |
| { |
| /* |
| * Check to see whether an error occurred while writing out the data to |
| * the allocated blocks. If so, return the magic error code so that we |
| * fallback to buffered I/O and attempt to complete the remainder of |
| * the I/O. Any blocks that may have been allocated in preparation for |
| * the direct I/O will be reused during buffered I/O. |
| */ |
| if (flags & (IOMAP_WRITE | IOMAP_DIRECT) && written == 0) |
| return -ENOTBLK; |
| |
| return 0; |
| } |
| |
| const struct iomap_ops ext4_iomap_ops = { |
| .iomap_begin = ext4_iomap_begin, |
| .iomap_end = ext4_iomap_end, |
| }; |
| |
| const struct iomap_ops ext4_iomap_overwrite_ops = { |
| .iomap_begin = ext4_iomap_overwrite_begin, |
| .iomap_end = ext4_iomap_end, |
| }; |
| |
| static int ext4_iomap_begin_report(struct inode *inode, loff_t offset, |
| loff_t length, unsigned int flags, |
| struct iomap *iomap, struct iomap *srcmap) |
| { |
| int ret; |
| struct ext4_map_blocks map; |
| u8 blkbits = inode->i_blkbits; |
| |
| if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK) |
| return -EINVAL; |
| |
| if (ext4_has_inline_data(inode)) { |
| ret = ext4_inline_data_iomap(inode, iomap); |
| if (ret != -EAGAIN) { |
| if (ret == 0 && offset >= iomap->length) |
| ret = -ENOENT; |
| return ret; |
| } |
| } |
| |
| /* |
| * Calculate the first and last logical block respectively. |
| */ |
| map.m_lblk = offset >> blkbits; |
| map.m_len = min_t(loff_t, (offset + length - 1) >> blkbits, |
| EXT4_MAX_LOGICAL_BLOCK) - map.m_lblk + 1; |
| |
| /* |
| * Fiemap callers may call for offset beyond s_bitmap_maxbytes. |
| * So handle it here itself instead of querying ext4_map_blocks(). |
| * Since ext4_map_blocks() will warn about it and will return |
| * -EIO error. |
| */ |
| if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| |
| if (offset >= sbi->s_bitmap_maxbytes) { |
| map.m_flags = 0; |
| goto set_iomap; |
| } |
| } |
| |
| ret = ext4_map_blocks(NULL, inode, &map, 0); |
| if (ret < 0) |
| return ret; |
| set_iomap: |
| ext4_set_iomap(inode, iomap, &map, offset, length, flags); |
| |
| return 0; |
| } |
| |
| const struct iomap_ops ext4_iomap_report_ops = { |
| .iomap_begin = ext4_iomap_begin_report, |
| }; |
| |
| /* |
| * For data=journal mode, folio should be marked dirty only when it was |
| * writeably mapped. When that happens, it was already attached to the |
| * transaction and marked as jbddirty (we take care of this in |
| * ext4_page_mkwrite()). On transaction commit, we writeprotect page mappings |
| * so we should have nothing to do here, except for the case when someone |
| * had the page pinned and dirtied the page through this pin (e.g. by doing |
| * direct IO to it). In that case we'd need to attach buffers here to the |
| * transaction but we cannot due to lock ordering. We cannot just dirty the |
| * folio and leave attached buffers clean, because the buffers' dirty state is |
| * "definitive". We cannot just set the buffers dirty or jbddirty because all |
| * the journalling code will explode. So what we do is to mark the folio |
| * "pending dirty" and next time ext4_writepages() is called, attach buffers |
| * to the transaction appropriately. |
| */ |
| static bool ext4_journalled_dirty_folio(struct address_space *mapping, |
| struct folio *folio) |
| { |
| WARN_ON_ONCE(!folio_buffers(folio)); |
| if (folio_maybe_dma_pinned(folio)) |
| folio_set_checked(folio); |
| return filemap_dirty_folio(mapping, folio); |
| } |
| |
| static bool ext4_dirty_folio(struct address_space *mapping, struct folio *folio) |
| { |
| WARN_ON_ONCE(!folio_test_locked(folio) && !folio_test_dirty(folio)); |
| WARN_ON_ONCE(!folio_buffers(folio)); |
| return block_dirty_folio(mapping, folio); |
| } |
| |
| static int ext4_iomap_swap_activate(struct swap_info_struct *sis, |
| struct file *file, sector_t *span) |
| { |
| return iomap_swapfile_activate(sis, file, span, |
| &ext4_iomap_report_ops); |
| } |
| |
| static const struct address_space_operations ext4_aops = { |
| .read_folio = ext4_read_folio, |
| .readahead = ext4_readahead, |
| .writepages = ext4_writepages, |
| .write_begin = ext4_write_begin, |
| .write_end = ext4_write_end, |
| .dirty_folio = ext4_dirty_folio, |
| .bmap = ext4_bmap, |
| .invalidate_folio = ext4_invalidate_folio, |
| .release_folio = ext4_release_folio, |
| .direct_IO = noop_direct_IO, |
| .migrate_folio = buffer_migrate_folio, |
| .is_partially_uptodate = block_is_partially_uptodate, |
| .error_remove_folio = generic_error_remove_folio, |
| .swap_activate = ext4_iomap_swap_activate, |
| }; |
| |
| static const struct address_space_operations ext4_journalled_aops = { |
| .read_folio = ext4_read_folio, |
| .readahead = ext4_readahead, |
| .writepages = ext4_writepages, |
| .write_begin = ext4_write_begin, |
| .write_end = ext4_journalled_write_end, |
| .dirty_folio = ext4_journalled_dirty_folio, |
| .bmap = ext4_bmap, |
| .invalidate_folio = ext4_journalled_invalidate_folio, |
| .release_folio = ext4_release_folio, |
| .direct_IO = noop_direct_IO, |
| .migrate_folio = buffer_migrate_folio_norefs, |
| .is_partially_uptodate = block_is_partially_uptodate, |
| .error_remove_folio = generic_error_remove_folio, |
| .swap_activate = ext4_iomap_swap_activate, |
| }; |
| |
| static const struct address_space_operations ext4_da_aops = { |
| .read_folio = ext4_read_folio, |
| .readahead = ext4_readahead, |
| .writepages = ext4_writepages, |
| .write_begin = ext4_da_write_begin, |
| .write_end = ext4_da_write_end, |
| .dirty_folio = ext4_dirty_folio, |
| .bmap = ext4_bmap, |
| .invalidate_folio = ext4_invalidate_folio, |
| .release_folio = ext4_release_folio, |
| .direct_IO = noop_direct_IO, |
| .migrate_folio = buffer_migrate_folio, |
| .is_partially_uptodate = block_is_partially_uptodate, |
| .error_remove_folio = generic_error_remove_folio, |
| .swap_activate = ext4_iomap_swap_activate, |
| }; |
| |
| static const struct address_space_operations ext4_dax_aops = { |
| .writepages = ext4_dax_writepages, |
| .direct_IO = noop_direct_IO, |
| .dirty_folio = noop_dirty_folio, |
| .bmap = ext4_bmap, |
| .swap_activate = ext4_iomap_swap_activate, |
| }; |
| |
| void ext4_set_aops(struct inode *inode) |
| { |
| switch (ext4_inode_journal_mode(inode)) { |
| case EXT4_INODE_ORDERED_DATA_MODE: |
| case EXT4_INODE_WRITEBACK_DATA_MODE: |
| break; |
| case EXT4_INODE_JOURNAL_DATA_MODE: |
| inode->i_mapping->a_ops = &ext4_journalled_aops; |
| return; |
| default: |
| BUG(); |
| } |
| if (IS_DAX(inode)) |
| inode->i_mapping->a_ops = &ext4_dax_aops; |
| else if (test_opt(inode->i_sb, DELALLOC)) |
| inode->i_mapping->a_ops = &ext4_da_aops; |
| else |
| inode->i_mapping->a_ops = &ext4_aops; |
| } |
| |
| /* |
| * Here we can't skip an unwritten buffer even though it usually reads zero |
| * because it might have data in pagecache (eg, if called from ext4_zero_range, |
| * ext4_punch_hole, etc) which needs to be properly zeroed out. Otherwise a |
| * racing writeback can come later and flush the stale pagecache to disk. |
| */ |
| static int __ext4_block_zero_page_range(handle_t *handle, |
| struct address_space *mapping, loff_t from, loff_t length) |
| { |
| ext4_fsblk_t index = from >> PAGE_SHIFT; |
| unsigned offset = from & (PAGE_SIZE-1); |
| unsigned blocksize, pos; |
| ext4_lblk_t iblock; |
| struct inode *inode = mapping->host; |
| struct buffer_head *bh; |
| struct folio *folio; |
| int err = 0; |
| |
| folio = __filemap_get_folio(mapping, from >> PAGE_SHIFT, |
| FGP_LOCK | FGP_ACCESSED | FGP_CREAT, |
| mapping_gfp_constraint(mapping, ~__GFP_FS)); |
| if (IS_ERR(folio)) |
| return PTR_ERR(folio); |
| |
| blocksize = inode->i_sb->s_blocksize; |
| |
| iblock = index << (PAGE_SHIFT - inode->i_sb->s_blocksize_bits); |
| |
| bh = folio_buffers(folio); |
| if (!bh) |
| bh = create_empty_buffers(folio, blocksize, 0); |
| |
| /* Find the buffer that contains "offset" */ |
| pos = blocksize; |
| while (offset >= pos) { |
| bh = bh->b_this_page; |
| iblock++; |
| pos += blocksize; |
| } |
| if (buffer_freed(bh)) { |
| BUFFER_TRACE(bh, "freed: skip"); |
| goto unlock; |
| } |
| if (!buffer_mapped(bh)) { |
| BUFFER_TRACE(bh, "unmapped"); |
| ext4_get_block(inode, iblock, bh, 0); |
| /* unmapped? It's a hole - nothing to do */ |
| if (!buffer_mapped(bh)) { |
| BUFFER_TRACE(bh, "still unmapped"); |
| goto unlock; |
| } |
| } |
| |
| /* Ok, it's mapped. Make sure it's up-to-date */ |
| if (folio_test_uptodate(folio)) |
| set_buffer_uptodate(bh); |
| |
| if (!buffer_uptodate(bh)) { |
| err = ext4_read_bh_lock(bh, 0, true); |
| if (err) |
| goto unlock; |
| if (fscrypt_inode_uses_fs_layer_crypto(inode)) { |
| /* We expect the key to be set. */ |
| BUG_ON(!fscrypt_has_encryption_key(inode)); |
| err = fscrypt_decrypt_pagecache_blocks(folio, |
| blocksize, |
| bh_offset(bh)); |
| if (err) { |
| clear_buffer_uptodate(bh); |
| goto unlock; |
| } |
| } |
| } |
| if (ext4_should_journal_data(inode)) { |
| BUFFER_TRACE(bh, "get write access"); |
| err = ext4_journal_get_write_access(handle, inode->i_sb, bh, |
| EXT4_JTR_NONE); |
| if (err) |
| goto unlock; |
| } |
| folio_zero_range(folio, offset, length); |
| BUFFER_TRACE(bh, "zeroed end of block"); |
| |
| if (ext4_should_journal_data(inode)) { |
| err = ext4_dirty_journalled_data(handle, bh); |
| } else { |
| err = 0; |
| mark_buffer_dirty(bh); |
| if (ext4_should_order_data(inode)) |
| err = ext4_jbd2_inode_add_write(handle, inode, from, |
| length); |
| } |
| |
| unlock: |
| folio_unlock(folio); |
| folio_put(folio); |
| return err; |
| } |
| |
| /* |
| * ext4_block_zero_page_range() zeros out a mapping of length 'length' |
| * starting from file offset 'from'. The range to be zero'd must |
| * be contained with in one block. If the specified range exceeds |
| * the end of the block it will be shortened to end of the block |
| * that corresponds to 'from' |
| */ |
| static int ext4_block_zero_page_range(handle_t *handle, |
| struct address_space *mapping, loff_t from, loff_t length) |
| { |
| struct inode *inode = mapping->host; |
| unsigned offset = from & (PAGE_SIZE-1); |
| unsigned blocksize = inode->i_sb->s_blocksize; |
| unsigned max = blocksize - (offset & (blocksize - 1)); |
| |
| /* |
| * correct length if it does not fall between |
| * 'from' and the end of the block |
| */ |
| if (length > max || length < 0) |
| length = max; |
| |
| if (IS_DAX(inode)) { |
| return dax_zero_range(inode, from, length, NULL, |
| &ext4_iomap_ops); |
| } |
| return __ext4_block_zero_page_range(handle, mapping, from, length); |
| } |
| |
| /* |
| * ext4_block_truncate_page() zeroes out a mapping from file offset `from' |
| * up to the end of the block which corresponds to `from'. |
| * This required during truncate. We need to physically zero the tail end |
| * of that block so it doesn't yield old data if the file is later grown. |
| */ |
| static int ext4_block_truncate_page(handle_t *handle, |
| struct address_space *mapping, loff_t from) |
| { |
| unsigned offset = from & (PAGE_SIZE-1); |
| unsigned length; |
| unsigned blocksize; |
| struct inode *inode = mapping->host; |
| |
| /* If we are processing an encrypted inode during orphan list handling */ |
| if (IS_ENCRYPTED(inode) && !fscrypt_has_encryption_key(inode)) |
| return 0; |
| |
| blocksize = inode->i_sb->s_blocksize; |
| length = blocksize - (offset & (blocksize - 1)); |
| |
| return ext4_block_zero_page_range(handle, mapping, from, length); |
| } |
| |
| int ext4_zero_partial_blocks(handle_t *handle, struct inode *inode, |
| loff_t lstart, loff_t length) |
| { |
| struct super_block *sb = inode->i_sb; |
| struct address_space *mapping = inode->i_mapping; |
| unsigned partial_start, partial_end; |
| ext4_fsblk_t start, end; |
| loff_t byte_end = (lstart + length - 1); |
| int err = 0; |
| |
| partial_start = lstart & (sb->s_blocksize - 1); |
| partial_end = byte_end & (sb->s_blocksize - 1); |
| |
| start = lstart >> sb->s_blocksize_bits; |
| end = byte_end >> sb->s_blocksize_bits; |
| |
| /* Handle partial zero within the single block */ |
| if (start == end && |
| (partial_start || (partial_end != sb->s_blocksize - 1))) { |
| err = ext4_block_zero_page_range(handle, mapping, |
| lstart, length); |
| return err; |
| } |
| /* Handle partial zero out on the start of the range */ |
| if (partial_start) { |
| err = ext4_block_zero_page_range(handle, mapping, |
| lstart, sb->s_blocksize); |
| if (err) |
| return err; |
| } |
| /* Handle partial zero out on the end of the range */ |
| if (partial_end != sb->s_blocksize - 1) |
| err = ext4_block_zero_page_range(handle, mapping, |
| byte_end - partial_end, |
| partial_end + 1); |
| return err; |
| } |
| |
| int ext4_can_truncate(struct inode *inode) |
| { |
| if (S_ISREG(inode->i_mode)) |
| return 1; |
| if (S_ISDIR(inode->i_mode)) |
| return 1; |
| if (S_ISLNK(inode->i_mode)) |
| return !ext4_inode_is_fast_symlink(inode); |
| return 0; |
| } |
| |
| /* |
| * We have to make sure i_disksize gets properly updated before we truncate |
| * page cache due to hole punching or zero range. Otherwise i_disksize update |
| * can get lost as it may have been postponed to submission of writeback but |
| * that will never happen after we truncate page cache. |
| */ |
| int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset, |
| loff_t len) |
| { |
| handle_t *handle; |
| int ret; |
| |
| loff_t size = i_size_read(inode); |
| |
| WARN_ON(!inode_is_locked(inode)); |
| if (offset > size || offset + len < size) |
| return 0; |
| |
| if (EXT4_I(inode)->i_disksize >= size) |
| return 0; |
| |
| handle = ext4_journal_start(inode, EXT4_HT_MISC, 1); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| ext4_update_i_disksize(inode, size); |
| ret = ext4_mark_inode_dirty(handle, inode); |
| ext4_journal_stop(handle); |
| |
| return ret; |
| } |
| |
| static void ext4_wait_dax_page(struct inode *inode) |
| { |
| filemap_invalidate_unlock(inode->i_mapping); |
| schedule(); |
| filemap_invalidate_lock(inode->i_mapping); |
| } |
| |
| int ext4_break_layouts(struct inode *inode) |
| { |
| struct page *page; |
| int error; |
| |
| if (WARN_ON_ONCE(!rwsem_is_locked(&inode->i_mapping->invalidate_lock))) |
| return -EINVAL; |
| |
| do { |
| page = dax_layout_busy_page(inode->i_mapping); |
| if (!page) |
| return 0; |
| |
| error = ___wait_var_event(&page->_refcount, |
| atomic_read(&page->_refcount) == 1, |
| TASK_INTERRUPTIBLE, 0, 0, |
| ext4_wait_dax_page(inode)); |
| } while (error == 0); |
| |
| return error; |
| } |
| |
| /* |
| * ext4_punch_hole: punches a hole in a file by releasing the blocks |
| * associated with the given offset and length |
| * |
| * @inode: File inode |
| * @offset: The offset where the hole will begin |
| * @len: The length of the hole |
| * |
| * Returns: 0 on success or negative on failure |
| */ |
| |
| int ext4_punch_hole(struct file *file, loff_t offset, loff_t length) |
| { |
| struct inode *inode = file_inode(file); |
| struct super_block *sb = inode->i_sb; |
| ext4_lblk_t first_block, stop_block; |
| struct address_space *mapping = inode->i_mapping; |
| loff_t first_block_offset, last_block_offset, max_length; |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| handle_t *handle; |
| unsigned int credits; |
| int ret = 0, ret2 = 0; |
| |
| trace_ext4_punch_hole(inode, offset, length, 0); |
| |
| /* |
| * Write out all dirty pages to avoid race conditions |
| * Then release them. |
| */ |
| if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) { |
| ret = filemap_write_and_wait_range(mapping, offset, |
| offset + length - 1); |
| if (ret) |
| return ret; |
| } |
| |
| inode_lock(inode); |
| |
| /* No need to punch hole beyond i_size */ |
| if (offset >= inode->i_size) |
| goto out_mutex; |
| |
| /* |
| * If the hole extends beyond i_size, set the hole |
| * to end after the page that contains i_size |
| */ |
| if (offset + length > inode->i_size) { |
| length = inode->i_size + |
| PAGE_SIZE - (inode->i_size & (PAGE_SIZE - 1)) - |
| offset; |
| } |
| |
| /* |
| * For punch hole the length + offset needs to be within one block |
| * before last range. Adjust the length if it goes beyond that limit. |
| */ |
| max_length = sbi->s_bitmap_maxbytes - inode->i_sb->s_blocksize; |
| if (offset + length > max_length) |
| length = max_length - offset; |
| |
| if (offset & (sb->s_blocksize - 1) || |
| (offset + length) & (sb->s_blocksize - 1)) { |
| /* |
| * Attach jinode to inode for jbd2 if we do any zeroing of |
| * partial block |
| */ |
| ret = ext4_inode_attach_jinode(inode); |
| if (ret < 0) |
| goto out_mutex; |
| |
| } |
| |
| /* Wait all existing dio workers, newcomers will block on i_rwsem */ |
| inode_dio_wait(inode); |
| |
| ret = file_modified(file); |
| if (ret) |
| goto out_mutex; |
| |
| /* |
| * Prevent page faults from reinstantiating pages we have released from |
| * page cache. |
| */ |
| filemap_invalidate_lock(mapping); |
| |
| ret = ext4_break_layouts(inode); |
| if (ret) |
| goto out_dio; |
| |
| first_block_offset = round_up(offset, sb->s_blocksize); |
| last_block_offset = round_down((offset + length), sb->s_blocksize) - 1; |
| |
| /* Now release the pages and zero block aligned part of pages*/ |
| if (last_block_offset > first_block_offset) { |
| ret = ext4_update_disksize_before_punch(inode, offset, length); |
| if (ret) |
| goto out_dio; |
| truncate_pagecache_range(inode, first_block_offset, |
| last_block_offset); |
| } |
| |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| credits = ext4_writepage_trans_blocks(inode); |
| else |
| credits = ext4_blocks_for_truncate(inode); |
| handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE, credits); |
| if (IS_ERR(handle)) { |
| ret = PTR_ERR(handle); |
| ext4_std_error(sb, ret); |
| goto out_dio; |
| } |
| |
| ret = ext4_zero_partial_blocks(handle, inode, offset, |
| length); |
| if (ret) |
| goto out_stop; |
| |
| first_block = (offset + sb->s_blocksize - 1) >> |
| EXT4_BLOCK_SIZE_BITS(sb); |
| stop_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb); |
| |
| /* If there are blocks to remove, do it */ |
| if (stop_block > first_block) { |
| ext4_lblk_t hole_len = stop_block - first_block; |
| |
| down_write(&EXT4_I(inode)->i_data_sem); |
| ext4_discard_preallocations(inode); |
| |
| ext4_es_remove_extent(inode, first_block, hole_len); |
| |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| ret = ext4_ext_remove_space(inode, first_block, |
| stop_block - 1); |
| else |
| ret = ext4_ind_remove_space(handle, inode, first_block, |
| stop_block); |
| |
| ext4_es_insert_extent(inode, first_block, hole_len, ~0, |
| EXTENT_STATUS_HOLE); |
| up_write(&EXT4_I(inode)->i_data_sem); |
| } |
| ext4_fc_track_range(handle, inode, first_block, stop_block); |
| if (IS_SYNC(inode)) |
| ext4_handle_sync(handle); |
| |
| inode_set_mtime_to_ts(inode, inode_set_ctime_current(inode)); |
| ret2 = ext4_mark_inode_dirty(handle, inode); |
| if (unlikely(ret2)) |
| ret = ret2; |
| if (ret >= 0) |
| ext4_update_inode_fsync_trans(handle, inode, 1); |
| out_stop: |
| ext4_journal_stop(handle); |
| out_dio: |
| filemap_invalidate_unlock(mapping); |
| out_mutex: |
| inode_unlock(inode); |
| return ret; |
| } |
| |
| int ext4_inode_attach_jinode(struct inode *inode) |
| { |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| struct jbd2_inode *jinode; |
| |
| if (ei->jinode || !EXT4_SB(inode->i_sb)->s_journal) |
| return 0; |
| |
| jinode = jbd2_alloc_inode(GFP_KERNEL); |
| spin_lock(&inode->i_lock); |
| if (!ei->jinode) { |
| if (!jinode) { |
| spin_unlock(&inode->i_lock); |
| return -ENOMEM; |
| } |
| ei->jinode = jinode; |
| jbd2_journal_init_jbd_inode(ei->jinode, inode); |
| jinode = NULL; |
| } |
| spin_unlock(&inode->i_lock); |
| if (unlikely(jinode != NULL)) |
| jbd2_free_inode(jinode); |
| return 0; |
| } |
| |
| /* |
| * ext4_truncate() |
| * |
| * We block out ext4_get_block() block instantiations across the entire |
| * transaction, and VFS/VM ensures that ext4_truncate() cannot run |
| * simultaneously on behalf of the same inode. |
| * |
| * As we work through the truncate and commit bits of it to the journal there |
| * is one core, guiding principle: the file's tree must always be consistent on |
| * disk. We must be able to restart the truncate after a crash. |
| * |
| * The file's tree may be transiently inconsistent in memory (although it |
| * probably isn't), but whenever we close off and commit a journal transaction, |
| * the contents of (the filesystem + the journal) must be consistent and |
| * restartable. It's pretty simple, really: bottom up, right to left (although |
| * left-to-right works OK too). |
| * |
| * Note that at recovery time, journal replay occurs *before* the restart of |
| * truncate against the orphan inode list. |
| * |
| * The committed inode has the new, desired i_size (which is the same as |
| * i_disksize in this case). After a crash, ext4_orphan_cleanup() will see |
| * that this inode's truncate did not complete and it will again call |
| * ext4_truncate() to have another go. So there will be instantiated blocks |
| * to the right of the truncation point in a crashed ext4 filesystem. But |
| * that's fine - as long as they are linked from the inode, the post-crash |
| * ext4_truncate() run will find them and release them. |
| */ |
| int ext4_truncate(struct inode *inode) |
| { |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| unsigned int credits; |
| int err = 0, err2; |
| handle_t *handle; |
| struct address_space *mapping = inode->i_mapping; |
| |
| /* |
| * There is a possibility that we're either freeing the inode |
| * or it's a completely new inode. In those cases we might not |
| * have i_rwsem locked because it's not necessary. |
| */ |
| if (!(inode->i_state & (I_NEW|I_FREEING))) |
| WARN_ON(!inode_is_locked(inode)); |
| trace_ext4_truncate_enter(inode); |
| |
| if (!ext4_can_truncate(inode)) |
| goto out_trace; |
| |
| if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC)) |
| ext4_set_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE); |
| |
| if (ext4_has_inline_data(inode)) { |
| int has_inline = 1; |
| |
| err = ext4_inline_data_truncate(inode, &has_inline); |
| if (err || has_inline) |
| goto out_trace; |
| } |
| |
| /* If we zero-out tail of the page, we have to create jinode for jbd2 */ |
| if (inode->i_size & (inode->i_sb->s_blocksize - 1)) { |
| err = ext4_inode_attach_jinode(inode); |
| if (err) |
| goto out_trace; |
| } |
| |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| credits = ext4_writepage_trans_blocks(inode); |
| else |
| credits = ext4_blocks_for_truncate(inode); |
| |
| handle = ext4_journal_start(inode, EXT4_HT_TRUNCATE, credits); |
| if (IS_ERR(handle)) { |
| err = PTR_ERR(handle); |
| goto out_trace; |
| } |
| |
| if (inode->i_size & (inode->i_sb->s_blocksize - 1)) |
| ext4_block_truncate_page(handle, mapping, inode->i_size); |
| |
| /* |
| * We add the inode to the orphan list, so that if this |
| * truncate spans multiple transactions, and we crash, we will |
| * resume the truncate when the filesystem recovers. It also |
| * marks the inode dirty, to catch the new size. |
| * |
| * Implication: the file must always be in a sane, consistent |
| * truncatable state while each transaction commits. |
| */ |
| err = ext4_orphan_add(handle, inode); |
| if (err) |
| goto out_stop; |
| |
| down_write(&EXT4_I(inode)->i_data_sem); |
| |
| ext4_discard_preallocations(inode); |
| |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| err = ext4_ext_truncate(handle, inode); |
| else |
| ext4_ind_truncate(handle, inode); |
| |
| up_write(&ei->i_data_sem); |
| if (err) |
| goto out_stop; |
| |
| if (IS_SYNC(inode)) |
| ext4_handle_sync(handle); |
| |
| out_stop: |
| /* |
| * If this was a simple ftruncate() and the file will remain alive, |
| * then we need to clear up the orphan record which we created above. |
| * However, if this was a real unlink then we were called by |
| * ext4_evict_inode(), and we allow that function to clean up the |
| * orphan info for us. |
| */ |
| if (inode->i_nlink) |
| ext4_orphan_del(handle, inode); |
| |
| inode_set_mtime_to_ts(inode, inode_set_ctime_current(inode)); |
| err2 = ext4_mark_inode_dirty(handle, inode); |
| if (unlikely(err2 && !err)) |
| err = err2; |
| ext4_journal_stop(handle); |
| |
| out_trace: |
| trace_ext4_truncate_exit(inode); |
| return err; |
| } |
| |
| static inline u64 ext4_inode_peek_iversion(const struct inode *inode) |
| { |
| if (unlikely(EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL)) |
| return inode_peek_iversion_raw(inode); |
| else |
| return inode_peek_iversion(inode); |
| } |
| |
| static int ext4_inode_blocks_set(struct ext4_inode *raw_inode, |
| struct ext4_inode_info *ei) |
| { |
| struct inode *inode = &(ei->vfs_inode); |
| u64 i_blocks = READ_ONCE(inode->i_blocks); |
| struct super_block *sb = inode->i_sb; |
| |
| if (i_blocks <= ~0U) { |
| /* |
| * i_blocks can be represented in a 32 bit variable |
| * as multiple of 512 bytes |
| */ |
| raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); |
| raw_inode->i_blocks_high = 0; |
| ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE); |
| return 0; |
| } |
| |
| /* |
| * This should never happen since sb->s_maxbytes should not have |
| * allowed this, sb->s_maxbytes was set according to the huge_file |
| * feature in ext4_fill_super(). |
| */ |
| if (!ext4_has_feature_huge_file(sb)) |
| return -EFSCORRUPTED; |
| |
| if (i_blocks <= 0xffffffffffffULL) { |
| /* |
| * i_blocks can be represented in a 48 bit variable |
| * as multiple of 512 bytes |
| */ |
| raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); |
| raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); |
| ext4_clear_inode_flag(inode, EXT4_INODE_HUGE_FILE); |
| } else { |
| ext4_set_inode_flag(inode, EXT4_INODE_HUGE_FILE); |
| /* i_block is stored in file system block size */ |
| i_blocks = i_blocks >> (inode->i_blkbits - 9); |
| raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); |
| raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); |
| } |
| return 0; |
| } |
| |
| static int ext4_fill_raw_inode(struct inode *inode, struct ext4_inode *raw_inode) |
| { |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| uid_t i_uid; |
| gid_t i_gid; |
| projid_t i_projid; |
| int block; |
| int err; |
| |
| err = ext4_inode_blocks_set(raw_inode, ei); |
| |
| raw_inode->i_mode = cpu_to_le16(inode->i_mode); |
| i_uid = i_uid_read(inode); |
| i_gid = i_gid_read(inode); |
| i_projid = from_kprojid(&init_user_ns, ei->i_projid); |
| if (!(test_opt(inode->i_sb, NO_UID32))) { |
| raw_inode->i_uid_low = cpu_to_le16(low_16_bits(i_uid)); |
| raw_inode->i_gid_low = cpu_to_le16(low_16_bits(i_gid)); |
| /* |
| * Fix up interoperability with old kernels. Otherwise, |
| * old inodes get re-used with the upper 16 bits of the |
| * uid/gid intact. |
| */ |
| if (ei->i_dtime && list_empty(&ei->i_orphan)) { |
| raw_inode->i_uid_high = 0; |
| raw_inode->i_gid_high = 0; |
| } else { |
| raw_inode->i_uid_high = |
| cpu_to_le16(high_16_bits(i_uid)); |
| raw_inode->i_gid_high = |
| cpu_to_le16(high_16_bits(i_gid)); |
| } |
| } else { |
| raw_inode->i_uid_low = cpu_to_le16(fs_high2lowuid(i_uid)); |
| raw_inode->i_gid_low = cpu_to_le16(fs_high2lowgid(i_gid)); |
| raw_inode->i_uid_high = 0; |
| raw_inode->i_gid_high = 0; |
| } |
| raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); |
| |
| EXT4_INODE_SET_CTIME(inode, raw_inode); |
| EXT4_INODE_SET_MTIME(inode, raw_inode); |
| EXT4_INODE_SET_ATIME(inode, raw_inode); |
| EXT4_EINODE_SET_XTIME(i_crtime, ei, raw_inode); |
| |
| raw_inode->i_dtime = cpu_to_le32(ei->i_dtime); |
| raw_inode->i_flags = cpu_to_le32(ei->i_flags & 0xFFFFFFFF); |
| if (likely(!test_opt2(inode->i_sb, HURD_COMPAT))) |
| raw_inode->i_file_acl_high = |
| cpu_to_le16(ei->i_file_acl >> 32); |
| raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl); |
| ext4_isize_set(raw_inode, ei->i_disksize); |
| |
| raw_inode->i_generation = cpu_to_le32(inode->i_generation); |
| if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { |
| if (old_valid_dev(inode->i_rdev)) { |
| raw_inode->i_block[0] = |
| cpu_to_le32(old_encode_dev(inode->i_rdev)); |
| raw_inode->i_block[1] = 0; |
| } else { |
| raw_inode->i_block[0] = 0; |
| raw_inode->i_block[1] = |
| cpu_to_le32(new_encode_dev(inode->i_rdev)); |
| raw_inode->i_block[2] = 0; |
| } |
| } else if (!ext4_has_inline_data(inode)) { |
| for (block = 0; block < EXT4_N_BLOCKS; block++) |
| raw_inode->i_block[block] = ei->i_data[block]; |
| } |
| |
| if (likely(!test_opt2(inode->i_sb, HURD_COMPAT))) { |
| u64 ivers = ext4_inode_peek_iversion(inode); |
| |
| raw_inode->i_disk_version = cpu_to_le32(ivers); |
| if (ei->i_extra_isize) { |
| if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) |
| raw_inode->i_version_hi = |
| cpu_to_le32(ivers >> 32); |
| raw_inode->i_extra_isize = |
| cpu_to_le16(ei->i_extra_isize); |
| } |
| } |
| |
| if (i_projid != EXT4_DEF_PROJID && |
| !ext4_has_feature_project(inode->i_sb)) |
| err = err ?: -EFSCORRUPTED; |
| |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE && |
| EXT4_FITS_IN_INODE(raw_inode, ei, i_projid)) |
| raw_inode->i_projid = cpu_to_le32(i_projid); |
| |
| ext4_inode_csum_set(inode, raw_inode, ei); |
| return err; |
| } |
| |
| /* |
| * ext4_get_inode_loc returns with an extra refcount against the inode's |
| * underlying buffer_head on success. If we pass 'inode' and it does not |
| * have in-inode xattr, we have all inode data in memory that is needed |
| * to recreate the on-disk version of this inode. |
| */ |
| static int __ext4_get_inode_loc(struct super_block *sb, unsigned long ino, |
| struct inode *inode, struct ext4_iloc *iloc, |
| ext4_fsblk_t *ret_block) |
| { |
| struct ext4_group_desc *gdp; |
| struct buffer_head *bh; |
| ext4_fsblk_t block; |
| struct blk_plug plug; |
| int inodes_per_block, inode_offset; |
| |
| iloc->bh = NULL; |
| if (ino < EXT4_ROOT_INO || |
| ino > le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count)) |
| return -EFSCORRUPTED; |
| |
| iloc->block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb); |
| gdp = ext4_get_group_desc(sb, iloc->block_group, NULL); |
| if (!gdp) |
| return -EIO; |
| |
| /* |
| * Figure out the offset within the block group inode table |
| */ |
| inodes_per_block = EXT4_SB(sb)->s_inodes_per_block; |
| inode_offset = ((ino - 1) % |
| EXT4_INODES_PER_GROUP(sb)); |
| iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb); |
| |
| block = ext4_inode_table(sb, gdp); |
| if ((block <= le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) || |
| (block >= ext4_blocks_count(EXT4_SB(sb)->s_es))) { |
| ext4_error(sb, "Invalid inode table block %llu in " |
| "block_group %u", block, iloc->block_group); |
| return -EFSCORRUPTED; |
| } |
| block += (inode_offset / inodes_per_block); |
| |
| bh = sb_getblk(sb, block); |
| if (unlikely(!bh)) |
| return -ENOMEM; |
| if (ext4_buffer_uptodate(bh)) |
| goto has_buffer; |
| |
| lock_buffer(bh); |
| if (ext4_buffer_uptodate(bh)) { |
| /* Someone brought it uptodate while we waited */ |
| unlock_buffer(bh); |
| goto has_buffer; |
| } |
| |
| /* |
| * If we have all information of the inode in memory and this |
| * is the only valid inode in the block, we need not read the |
| * block. |
| */ |
| if (inode && !ext4_test_inode_state(inode, EXT4_STATE_XATTR)) { |
| struct buffer_head *bitmap_bh; |
| int i, start; |
| |
| start = inode_offset & ~(inodes_per_block - 1); |
| |
| /* Is the inode bitmap in cache? */ |
| bitmap_bh = sb_getblk(sb, ext4_inode_bitmap(sb, gdp)); |
| if (unlikely(!bitmap_bh)) |
| goto make_io; |
| |
| /* |
| * If the inode bitmap isn't in cache then the |
| * optimisation may end up performing two reads instead |
| * of one, so skip it. |
| */ |
| if (!buffer_uptodate(bitmap_bh)) { |
| brelse(bitmap_bh); |
| goto make_io; |
| } |
| for (i = start; i < start + inodes_per_block; i++) { |
| if (i == inode_offset) |
| continue; |
| if (ext4_test_bit(i, bitmap_bh->b_data)) |
| break; |
| } |
| brelse(bitmap_bh); |
| if (i == start + inodes_per_block) { |
| struct ext4_inode *raw_inode = |
| (struct ext4_inode *) (bh->b_data + iloc->offset); |
| |
| /* all other inodes are free, so skip I/O */ |
| memset(bh->b_data, 0, bh->b_size); |
| if (!ext4_test_inode_state(inode, EXT4_STATE_NEW)) |
| ext4_fill_raw_inode(inode, raw_inode); |
| set_buffer_uptodate(bh); |
| unlock_buffer(bh); |
| goto has_buffer; |
| } |
| } |
| |
| make_io: |
| /* |
| * If we need to do any I/O, try to pre-readahead extra |
| * blocks from the inode table. |
| */ |
| blk_start_plug(&plug); |
| if (EXT4_SB(sb)->s_inode_readahead_blks) { |
| ext4_fsblk_t b, end, table; |
| unsigned num; |
| __u32 ra_blks = EXT4_SB(sb)->s_inode_readahead_blks; |
| |
| table = ext4_inode_table(sb, gdp); |
| /* s_inode_readahead_blks is always a power of 2 */ |
| b = block & ~((ext4_fsblk_t) ra_blks - 1); |
| if (table > b) |
| b = table; |
| end = b + ra_blks; |
| num = EXT4_INODES_PER_GROUP(sb); |
| if (ext4_has_group_desc_csum(sb)) |
| num -= ext4_itable_unused_count(sb, gdp); |
| table += num / inodes_per_block; |
| if (end > table) |
| end = table; |
| while (b <= end) |
| ext4_sb_breadahead_unmovable(sb, b++); |
| } |
| |
| /* |
| * There are other valid inodes in the buffer, this inode |
| * has in-inode xattrs, or we don't have this inode in memory. |
| * Read the block from disk. |
| */ |
| trace_ext4_load_inode(sb, ino); |
| ext4_read_bh_nowait(bh, REQ_META | REQ_PRIO, NULL); |
| blk_finish_plug(&plug); |
| wait_on_buffer(bh); |
| ext4_simulate_fail_bh(sb, bh, EXT4_SIM_INODE_EIO); |
| if (!buffer_uptodate(bh)) { |
| if (ret_block) |
| *ret_block = block; |
| brelse(bh); |
| return -EIO; |
| } |
| has_buffer: |
| iloc->bh = bh; |
| return 0; |
| } |
| |
| static int __ext4_get_inode_loc_noinmem(struct inode *inode, |
| struct ext4_iloc *iloc) |
| { |
| ext4_fsblk_t err_blk = 0; |
| int ret; |
| |
| ret = __ext4_get_inode_loc(inode->i_sb, inode->i_ino, NULL, iloc, |
| &err_blk); |
| |
| if (ret == -EIO) |
| ext4_error_inode_block(inode, err_blk, EIO, |
| "unable to read itable block"); |
| |
| return ret; |
| } |
| |
| int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc) |
| { |
| ext4_fsblk_t err_blk = 0; |
| int ret; |
| |
| ret = __ext4_get_inode_loc(inode->i_sb, inode->i_ino, inode, iloc, |
| &err_blk); |
| |
| if (ret == -EIO) |
| ext4_error_inode_block(inode, err_blk, EIO, |
| "unable to read itable block"); |
| |
| return ret; |
| } |
| |
| |
| int ext4_get_fc_inode_loc(struct super_block *sb, unsigned long ino, |
| struct ext4_iloc *iloc) |
| { |
| return __ext4_get_inode_loc(sb, ino, NULL, iloc, NULL); |
| } |
| |
| static bool ext4_should_enable_dax(struct inode *inode) |
| { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| |
| if (test_opt2(inode->i_sb, DAX_NEVER)) |
| return false; |
| if (!S_ISREG(inode->i_mode)) |
| return false; |
| if (ext4_should_journal_data(inode)) |
| return false; |
| if (ext4_has_inline_data(inode)) |
| return false; |
| if (ext4_test_inode_flag(inode, EXT4_INODE_ENCRYPT)) |
| return false; |
| if (ext4_test_inode_flag(inode, EXT4_INODE_VERITY)) |
| return false; |
| if (!test_bit(EXT4_FLAGS_BDEV_IS_DAX, &sbi->s_ext4_flags)) |
| return false; |
| if (test_opt(inode->i_sb, DAX_ALWAYS)) |
| return true; |
| |
| return ext4_test_inode_flag(inode, EXT4_INODE_DAX); |
| } |
| |
| void ext4_set_inode_flags(struct inode *inode, bool init) |
| { |
| unsigned int flags = EXT4_I(inode)->i_flags; |
| unsigned int new_fl = 0; |
| |
| WARN_ON_ONCE(IS_DAX(inode) && init); |
| |
| if (flags & EXT4_SYNC_FL) |
| new_fl |= S_SYNC; |
| if (flags & EXT4_APPEND_FL) |
| new_fl |= S_APPEND; |
| if (flags & EXT4_IMMUTABLE_FL) |
| new_fl |= S_IMMUTABLE; |
| if (flags & EXT4_NOATIME_FL) |
| new_fl |= S_NOATIME; |
| if (flags & EXT4_DIRSYNC_FL) |
| new_fl |= S_DIRSYNC; |
| |
| /* Because of the way inode_set_flags() works we must preserve S_DAX |
| * here if already set. */ |
| new_fl |= (inode->i_flags & S_DAX); |
| if (init && ext4_should_enable_dax(inode)) |
| new_fl |= S_DAX; |
| |
| if (flags & EXT4_ENCRYPT_FL) |
| new_fl |= S_ENCRYPTED; |
| if (flags & EXT4_CASEFOLD_FL) |
| new_fl |= S_CASEFOLD; |
| if (flags & EXT4_VERITY_FL) |
| new_fl |= S_VERITY; |
| inode_set_flags(inode, new_fl, |
| S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC|S_DAX| |
| S_ENCRYPTED|S_CASEFOLD|S_VERITY); |
| } |
| |
| static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode, |
| struct ext4_inode_info *ei) |
| { |
| blkcnt_t i_blocks ; |
| struct inode *inode = &(ei->vfs_inode); |
| struct super_block *sb = inode->i_sb; |
| |
| if (ext4_has_feature_huge_file(sb)) { |
| /* we are using combined 48 bit field */ |
| i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 | |
| le32_to_cpu(raw_inode->i_blocks_lo); |
| if (ext4_test_inode_flag(inode, EXT4_INODE_HUGE_FILE)) { |
| /* i_blocks represent file system block size */ |
| return i_blocks << (inode->i_blkbits - 9); |
| } else { |
| return i_blocks; |
| } |
| } else { |
| return le32_to_cpu(raw_inode->i_blocks_lo); |
| } |
| } |
| |
| static inline int ext4_iget_extra_inode(struct inode *inode, |
| struct ext4_inode *raw_inode, |
| struct ext4_inode_info *ei) |
| { |
| __le32 *magic = (void *)raw_inode + |
| EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize; |
| |
| if (EXT4_INODE_HAS_XATTR_SPACE(inode) && |
| *magic == cpu_to_le32(EXT4_XATTR_MAGIC)) { |
| int err; |
| |
| ext4_set_inode_state(inode, EXT4_STATE_XATTR); |
| err = ext4_find_inline_data_nolock(inode); |
| if (!err && ext4_has_inline_data(inode)) |
| ext4_set_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); |
| return err; |
| } else |
| EXT4_I(inode)->i_inline_off = 0; |
| return 0; |
| } |
| |
| int ext4_get_projid(struct inode *inode, kprojid_t *projid) |
| { |
| if (!ext4_has_feature_project(inode->i_sb)) |
| return -EOPNOTSUPP; |
| *projid = EXT4_I(inode)->i_projid; |
| return 0; |
| } |
| |
| /* |
| * ext4 has self-managed i_version for ea inodes, it stores the lower 32bit of |
| * refcount in i_version, so use raw values if inode has EXT4_EA_INODE_FL flag |
| * set. |
| */ |
| static inline void ext4_inode_set_iversion_queried(struct inode *inode, u64 val) |
| { |
| if (unlikely(EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL)) |
| inode_set_iversion_raw(inode, val); |
| else |
| inode_set_iversion_queried(inode, val); |
| } |
| |
| static const char *check_igot_inode(struct inode *inode, ext4_iget_flags flags) |
| |
| { |
| if (flags & EXT4_IGET_EA_INODE) { |
| if (!(EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL)) |
| return "missing EA_INODE flag"; |
| if (ext4_test_inode_state(inode, EXT4_STATE_XATTR) || |
| EXT4_I(inode)->i_file_acl) |
| return "ea_inode with extended attributes"; |
| } else { |
| if ((EXT4_I(inode)->i_flags & EXT4_EA_INODE_FL)) |
| return "unexpected EA_INODE flag"; |
| } |
| if (is_bad_inode(inode) && !(flags & EXT4_IGET_BAD)) |
| return "unexpected bad inode w/o EXT4_IGET_BAD"; |
| return NULL; |
| } |
| |
| struct inode *__ext4_iget(struct super_block *sb, unsigned long ino, |
| ext4_iget_flags flags, const char *function, |
| unsigned int line) |
| { |
| struct ext4_iloc iloc; |
| struct ext4_inode *raw_inode; |
| struct ext4_inode_info *ei; |
| struct ext4_super_block *es = EXT4_SB(sb)->s_es; |
| struct inode *inode; |
| const char *err_str; |
| journal_t *journal = EXT4_SB(sb)->s_journal; |
| long ret; |
| loff_t size; |
| int block; |
| uid_t i_uid; |
| gid_t i_gid; |
| projid_t i_projid; |
| |
| if ((!(flags & EXT4_IGET_SPECIAL) && |
| ((ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO) || |
| ino == le32_to_cpu(es->s_usr_quota_inum) || |
| ino == le32_to_cpu(es->s_grp_quota_inum) || |
| ino == le32_to_cpu(es->s_prj_quota_inum) || |
| ino == le32_to_cpu(es->s_orphan_file_inum))) || |
| (ino < EXT4_ROOT_INO) || |
| (ino > le32_to_cpu(es->s_inodes_count))) { |
| if (flags & EXT4_IGET_HANDLE) |
| return ERR_PTR(-ESTALE); |
| __ext4_error(sb, function, line, false, EFSCORRUPTED, 0, |
| "inode #%lu: comm %s: iget: illegal inode #", |
| ino, current->comm); |
| return ERR_PTR(-EFSCORRUPTED); |
| } |
| |
| inode = iget_locked(sb, ino); |
| if (!inode) |
| return ERR_PTR(-ENOMEM); |
| if (!(inode->i_state & I_NEW)) { |
| if ((err_str = check_igot_inode(inode, flags)) != NULL) { |
| ext4_error_inode(inode, function, line, 0, err_str); |
| iput(inode); |
| return ERR_PTR(-EFSCORRUPTED); |
| } |
| return inode; |
| } |
| |
| ei = EXT4_I(inode); |
| iloc.bh = NULL; |
| |
| ret = __ext4_get_inode_loc_noinmem(inode, &iloc); |
| if (ret < 0) |
| goto bad_inode; |
| raw_inode = ext4_raw_inode(&iloc); |
| |
| if ((flags & EXT4_IGET_HANDLE) && |
| (raw_inode->i_links_count == 0) && (raw_inode->i_mode == 0)) { |
| ret = -ESTALE; |
| goto bad_inode; |
| } |
| |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { |
| ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize); |
| if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > |
| EXT4_INODE_SIZE(inode->i_sb) || |
| (ei->i_extra_isize & 3)) { |
| ext4_error_inode(inode, function, line, 0, |
| "iget: bad extra_isize %u " |
| "(inode size %u)", |
| ei->i_extra_isize, |
| EXT4_INODE_SIZE(inode->i_sb)); |
| ret = -EFSCORRUPTED; |
| goto bad_inode; |
| } |
| } else |
| ei->i_extra_isize = 0; |
| |
| /* Precompute checksum seed for inode metadata */ |
| if (ext4_has_metadata_csum(sb)) { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| __u32 csum; |
| __le32 inum = cpu_to_le32(inode->i_ino); |
| __le32 gen = raw_inode->i_generation; |
| csum = ext4_chksum(sbi, sbi->s_csum_seed, (__u8 *)&inum, |
| sizeof(inum)); |
| ei->i_csum_seed = ext4_chksum(sbi, csum, (__u8 *)&gen, |
| sizeof(gen)); |
| } |
| |
| if ((!ext4_inode_csum_verify(inode, raw_inode, ei) || |
| ext4_simulate_fail(sb, EXT4_SIM_INODE_CRC)) && |
| (!(EXT4_SB(sb)->s_mount_state & EXT4_FC_REPLAY))) { |
| ext4_error_inode_err(inode, function, line, 0, |
| EFSBADCRC, "iget: checksum invalid"); |
| ret = -EFSBADCRC; |
| goto bad_inode; |
| } |
| |
| inode->i_mode = le16_to_cpu(raw_inode->i_mode); |
| i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low); |
| i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low); |
| if (ext4_has_feature_project(sb) && |
| EXT4_INODE_SIZE(sb) > EXT4_GOOD_OLD_INODE_SIZE && |
| EXT4_FITS_IN_INODE(raw_inode, ei, i_projid)) |
| i_projid = (projid_t)le32_to_cpu(raw_inode->i_projid); |
| else |
| i_projid = EXT4_DEF_PROJID; |
| |
| if (!(test_opt(inode->i_sb, NO_UID32))) { |
| i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16; |
| i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16; |
| } |
| i_uid_write(inode, i_uid); |
| i_gid_write(inode, i_gid); |
| ei->i_projid = make_kprojid(&init_user_ns, i_projid); |
| set_nlink(inode, le16_to_cpu(raw_inode->i_links_count)); |
| |
| ext4_clear_state_flags(ei); /* Only relevant on 32-bit archs */ |
| ei->i_inline_off = 0; |
| ei->i_dir_start_lookup = 0; |
| ei->i_dtime = le32_to_cpu(raw_inode->i_dtime); |
| /* We now have enough fields to check if the inode was active or not. |
| * This is needed because nfsd might try to access dead inodes |
| * the test is that same one that e2fsck uses |
| * NeilBrown 1999oct15 |
| */ |
| if (inode->i_nlink == 0) { |
| if ((inode->i_mode == 0 || flags & EXT4_IGET_SPECIAL || |
| !(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) && |
| ino != EXT4_BOOT_LOADER_INO) { |
| /* this inode is deleted or unallocated */ |
| if (flags & EXT4_IGET_SPECIAL) { |
| ext4_error_inode(inode, function, line, 0, |
| "iget: special inode unallocated"); |
| ret = -EFSCORRUPTED; |
| } else |
| ret = -ESTALE; |
| goto bad_inode; |
| } |
| /* The only unlinked inodes we let through here have |
| * valid i_mode and are being read by the orphan |
| * recovery code: that's fine, we're about to complete |
| * the process of deleting those. |
| * OR it is the EXT4_BOOT_LOADER_INO which is |
| * not initialized on a new filesystem. */ |
| } |
| ei->i_flags = le32_to_cpu(raw_inode->i_flags); |
| ext4_set_inode_flags(inode, true); |
| inode->i_blocks = ext4_inode_blocks(raw_inode, ei); |
| ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo); |
| if (ext4_has_feature_64bit(sb)) |
| ei->i_file_acl |= |
| ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; |
| inode->i_size = ext4_isize(sb, raw_inode); |
| if ((size = i_size_read(inode)) < 0) { |
| ext4_error_inode(inode, function, line, 0, |
| "iget: bad i_size value: %lld", size); |
| ret = -EFSCORRUPTED; |
| goto bad_inode; |
| } |
| /* |
| * If dir_index is not enabled but there's dir with INDEX flag set, |
| * we'd normally treat htree data as empty space. But with metadata |
| * checksumming that corrupts checksums so forbid that. |
| */ |
| if (!ext4_has_feature_dir_index(sb) && ext4_has_metadata_csum(sb) && |
| ext4_test_inode_flag(inode, EXT4_INODE_INDEX)) { |
| ext4_error_inode(inode, function, line, 0, |
| "iget: Dir with htree data on filesystem without dir_index feature."); |
| ret = -EFSCORRUPTED; |
| goto bad_inode; |
| } |
| ei->i_disksize = inode->i_size; |
| #ifdef CONFIG_QUOTA |
| ei->i_reserved_quota = 0; |
| #endif |
| inode->i_generation = le32_to_cpu(raw_inode->i_generation); |
| ei->i_block_group = iloc.block_group; |
| ei->i_last_alloc_group = ~0; |
| /* |
| * NOTE! The in-memory inode i_data array is in little-endian order |
| * even on big-endian machines: we do NOT byteswap the block numbers! |
| */ |
| for (block = 0; block < EXT4_N_BLOCKS; block++) |
| ei->i_data[block] = raw_inode->i_block[block]; |
| INIT_LIST_HEAD(&ei->i_orphan); |
| ext4_fc_init_inode(&ei->vfs_inode); |
| |
| /* |
| * Set transaction id's of transactions that have to be committed |
| * to finish f[data]sync. We set them to currently running transaction |
| * as we cannot be sure that the inode or some of its metadata isn't |
| * part of the transaction - the inode could have been reclaimed and |
| * now it is reread from disk. |
| */ |
| if (journal) { |
| transaction_t *transaction; |
| tid_t tid; |
| |
| read_lock(&journal->j_state_lock); |
| if (journal->j_running_transaction) |
| transaction = journal->j_running_transaction; |
| else |
| transaction = journal->j_committing_transaction; |
| if (transaction) |
| tid = transaction->t_tid; |
| else |
| tid = journal->j_commit_sequence; |
| read_unlock(&journal->j_state_lock); |
| ei->i_sync_tid = tid; |
| ei->i_datasync_tid = tid; |
| } |
| |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { |
| if (ei->i_extra_isize == 0) { |
| /* The extra space is currently unused. Use it. */ |
| BUILD_BUG_ON(sizeof(struct ext4_inode) & 3); |
| ei->i_extra_isize = sizeof(struct ext4_inode) - |
| EXT4_GOOD_OLD_INODE_SIZE; |
| } else { |
| ret = ext4_iget_extra_inode(inode, raw_inode, ei); |
| if (ret) |
| goto bad_inode; |
| } |
| } |
| |
| EXT4_INODE_GET_CTIME(inode, raw_inode); |
| EXT4_INODE_GET_ATIME(inode, raw_inode); |
| EXT4_INODE_GET_MTIME(inode, raw_inode); |
| EXT4_EINODE_GET_XTIME(i_crtime, ei, raw_inode); |
| |
| if (likely(!test_opt2(inode->i_sb, HURD_COMPAT))) { |
| u64 ivers = le32_to_cpu(raw_inode->i_disk_version); |
| |
| if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { |
| if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) |
| ivers |= |
| (__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32; |
| } |
| ext4_inode_set_iversion_queried(inode, ivers); |
| } |
| |
| ret = 0; |
| if (ei->i_file_acl && |
| !ext4_inode_block_valid(inode, ei->i_file_acl, 1)) { |
| ext4_error_inode(inode, function, line, 0, |
| "iget: bad extended attribute block %llu", |
| ei->i_file_acl); |
| ret = -EFSCORRUPTED; |
| goto bad_inode; |
| } else if (!ext4_has_inline_data(inode)) { |
| /* validate the block references in the inode */ |
| if (!(EXT4_SB(sb)->s_mount_state & EXT4_FC_REPLAY) && |
| (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || |
| (S_ISLNK(inode->i_mode) && |
| !ext4_inode_is_fast_symlink(inode)))) { |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) |
| ret = ext4_ext_check_inode(inode); |
| else |
| ret = ext4_ind_check_inode(inode); |
| } |
| } |
| if (ret) |
| goto bad_inode; |
| |
| if (S_ISREG(inode->i_mode)) { |
| inode->i_op = &ext4_file_inode_operations; |
| inode->i_fop = &ext4_file_operations; |
| ext4_set_aops(inode); |
| } else if (S_ISDIR(inode->i_mode)) { |
| inode->i_op = &ext4_dir_inode_operations; |
| inode->i_fop = &ext4_dir_operations; |
| } else if (S_ISLNK(inode->i_mode)) { |
| /* VFS does not allow setting these so must be corruption */ |
| if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) { |
| ext4_error_inode(inode, function, line, 0, |
| "iget: immutable or append flags " |
| "not allowed on symlinks"); |
| ret = -EFSCORRUPTED; |
| goto bad_inode; |
| } |
| if (IS_ENCRYPTED(inode)) { |
| inode->i_op = &ext4_encrypted_symlink_inode_operations; |
| } else if (ext4_inode_is_fast_symlink(inode)) { |
| inode->i_link = (char *)ei->i_data; |
| inode->i_op = &ext4_fast_symlink_inode_operations; |
| nd_terminate_link(ei->i_data, inode->i_size, |
| sizeof(ei->i_data) - 1); |
| } else { |
| inode->i_op = &ext4_symlink_inode_operations; |
| } |
| } else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) || |
| S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) { |
| inode->i_op = &ext4_special_inode_operations; |
| if (raw_inode->i_block[0]) |
| init_special_inode(inode, inode->i_mode, |
| old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); |
| else |
| init_special_inode(inode, inode->i_mode, |
| new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); |
| } else if (ino == EXT4_BOOT_LOADER_INO) { |
| make_bad_inode(inode); |
| } else { |
| ret = -EFSCORRUPTED; |
| ext4_error_inode(inode, function, line, 0, |
| "iget: bogus i_mode (%o)", inode->i_mode); |
| goto bad_inode; |
| } |
| if (IS_CASEFOLDED(inode) && !ext4_has_feature_casefold(inode->i_sb)) { |
| ext4_error_inode(inode, function, line, 0, |
| "casefold flag without casefold feature"); |
| ret = -EFSCORRUPTED; |
| goto bad_inode; |
| } |
| if ((err_str = check_igot_inode(inode, flags)) != NULL) { |
| ext4_error_inode(inode, function, line, 0, err_str); |
| ret = -EFSCORRUPTED; |
| goto bad_inode; |
| } |
| |
| brelse(iloc.bh); |
| unlock_new_inode(inode); |
| return inode; |
| |
| bad_inode: |
| brelse(iloc.bh); |
| iget_failed(inode); |
| return ERR_PTR(ret); |
| } |
| |
| static void __ext4_update_other_inode_time(struct super_block *sb, |
| unsigned long orig_ino, |
| unsigned long ino, |
| struct ext4_inode *raw_inode) |
| { |
| struct inode *inode; |
| |
| inode = find_inode_by_ino_rcu(sb, ino); |
| if (!inode) |
| return; |
| |
| if (!inode_is_dirtytime_only(inode)) |
| return; |
| |
| spin_lock(&inode->i_lock); |
| if (inode_is_dirtytime_only(inode)) { |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| |
| inode->i_state &= ~I_DIRTY_TIME; |
| spin_unlock(&inode->i_lock); |
| |
| spin_lock(&ei->i_raw_lock); |
| EXT4_INODE_SET_CTIME(inode, raw_inode); |
| EXT4_INODE_SET_MTIME(inode, raw_inode); |
| EXT4_INODE_SET_ATIME(inode, raw_inode); |
| ext4_inode_csum_set(inode, raw_inode, ei); |
| spin_unlock(&ei->i_raw_lock); |
| trace_ext4_other_inode_update_time(inode, orig_ino); |
| return; |
| } |
| spin_unlock(&inode->i_lock); |
| } |
| |
| /* |
| * Opportunistically update the other time fields for other inodes in |
| * the same inode table block. |
| */ |
| static void ext4_update_other_inodes_time(struct super_block *sb, |
| unsigned long orig_ino, char *buf) |
| { |
| unsigned long ino; |
| int i, inodes_per_block = EXT4_SB(sb)->s_inodes_per_block; |
| int inode_size = EXT4_INODE_SIZE(sb); |
| |
| /* |
| * Calculate the first inode in the inode table block. Inode |
| * numbers are one-based. That is, the first inode in a block |
| * (assuming 4k blocks and 256 byte inodes) is (n*16 + 1). |
| */ |
| ino = ((orig_ino - 1) & ~(inodes_per_block - 1)) + 1; |
| rcu_read_lock(); |
| for (i = 0; i < inodes_per_block; i++, ino++, buf += inode_size) { |
| if (ino == orig_ino) |
| continue; |
| __ext4_update_other_inode_time(sb, orig_ino, ino, |
| (struct ext4_inode *)buf); |
| } |
| rcu_read_unlock(); |
| } |
| |
| /* |
| * Post the struct inode info into an on-disk inode location in the |
| * buffer-cache. This gobbles the caller's reference to the |
| * buffer_head in the inode location struct. |
| * |
| * The caller must have write access to iloc->bh. |
| */ |
| static int ext4_do_update_inode(handle_t *handle, |
| struct inode *inode, |
| struct ext4_iloc *iloc) |
| { |
| struct ext4_inode *raw_inode = ext4_raw_inode(iloc); |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| struct buffer_head *bh = iloc->bh; |
| struct super_block *sb = inode->i_sb; |
| int err; |
| int need_datasync = 0, set_large_file = 0; |
| |
| spin_lock(&ei->i_raw_lock); |
| |
| /* |
| * For fields not tracked in the in-memory inode, initialise them |
| * to zero for new inodes. |
| */ |
| if (ext4_test_inode_state(inode, EXT4_STATE_NEW)) |
| memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size); |
| |
| if (READ_ONCE(ei->i_disksize) != ext4_isize(inode->i_sb, raw_inode)) |
| need_datasync = 1; |
| if (ei->i_disksize > 0x7fffffffULL) { |
| if (!ext4_has_feature_large_file(sb) || |
| EXT4_SB(sb)->s_es->s_rev_level == cpu_to_le32(EXT4_GOOD_OLD_REV)) |
| set_large_file = 1; |
| } |
| |
| err = ext4_fill_raw_inode(inode, raw_inode); |
| spin_unlock(&ei->i_raw_lock); |
| if (err) { |
| EXT4_ERROR_INODE(inode, "corrupted inode contents"); |
| goto out_brelse; |
| } |
| |
| if (inode->i_sb->s_flags & SB_LAZYTIME) |
| ext4_update_other_inodes_time(inode->i_sb, inode->i_ino, |
| bh->b_data); |
| |
| BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); |
| err = ext4_handle_dirty_metadata(handle, NULL, bh); |
| if (err) |
| goto out_error; |
| ext4_clear_inode_state(inode, EXT4_STATE_NEW); |
| if (set_large_file) { |
| BUFFER_TRACE(EXT4_SB(sb)->s_sbh, "get write access"); |
| err = ext4_journal_get_write_access(handle, sb, |
| EXT4_SB(sb)->s_sbh, |
| EXT4_JTR_NONE); |
| if (err) |
| goto out_error; |
| lock_buffer(EXT4_SB(sb)->s_sbh); |
| ext4_set_feature_large_file(sb); |
| ext4_superblock_csum_set(sb); |
| unlock_buffer(EXT4_SB(sb)->s_sbh); |
| ext4_handle_sync(handle); |
| err = ext4_handle_dirty_metadata(handle, NULL, |
| EXT4_SB(sb)->s_sbh); |
| } |
| ext4_update_inode_fsync_trans(handle, inode, need_datasync); |
| out_error: |
| ext4_std_error(inode->i_sb, err); |
| out_brelse: |
| brelse(bh); |
| return err; |
| } |
| |
| /* |
| * ext4_write_inode() |
| * |
| * We are called from a few places: |
| * |
| * - Within generic_file_aio_write() -> generic_write_sync() for O_SYNC files. |
| * Here, there will be no transaction running. We wait for any running |
| * transaction to commit. |
| * |
| * - Within flush work (sys_sync(), kupdate and such). |
| * We wait on commit, if told to. |
| * |
| * - Within iput_final() -> write_inode_now() |
| * We wait on commit, if told to. |
| * |
| * In all cases it is actually safe for us to return without doing anything, |
| * because the inode has been copied into a raw inode buffer in |
| * ext4_mark_inode_dirty(). This is a correctness thing for WB_SYNC_ALL |
| * writeback. |
| * |
| * Note that we are absolutely dependent upon all inode dirtiers doing the |
| * right thing: they *must* call mark_inode_dirty() after dirtying info in |
| * which we are interested. |
| * |
| * It would be a bug for them to not do this. The code: |
| * |
| * mark_inode_dirty(inode) |
| * stuff(); |
| * inode->i_size = expr; |
| * |
| * is in error because write_inode() could occur while `stuff()' is running, |
| * and the new i_size will be lost. Plus the inode will no longer be on the |
| * superblock's dirty inode list. |
| */ |
| int ext4_write_inode(struct inode *inode, struct writeback_control *wbc) |
| { |
| int err; |
| |
| if (WARN_ON_ONCE(current->flags & PF_MEMALLOC)) |
| return 0; |
| |
| if (unlikely(ext4_forced_shutdown(inode->i_sb))) |
| return -EIO; |
| |
| if (EXT4_SB(inode->i_sb)->s_journal) { |
| if (ext4_journal_current_handle()) { |
| ext4_debug("called recursively, non-PF_MEMALLOC!\n"); |
| dump_stack(); |
| return -EIO; |
| } |
| |
| /* |
| * No need to force transaction in WB_SYNC_NONE mode. Also |
| * ext4_sync_fs() will force the commit after everything is |
| * written. |
| */ |
| if (wbc->sync_mode != WB_SYNC_ALL || wbc->for_sync) |
| return 0; |
| |
| err = ext4_fc_commit(EXT4_SB(inode->i_sb)->s_journal, |
| EXT4_I(inode)->i_sync_tid); |
| } else { |
| struct ext4_iloc iloc; |
| |
| err = __ext4_get_inode_loc_noinmem(inode, &iloc); |
| if (err) |
| return err; |
| /* |
| * sync(2) will flush the whole buffer cache. No need to do |
| * it here separately for each inode. |
| */ |
| if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync) |
| sync_dirty_buffer(iloc.bh); |
| if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) { |
| ext4_error_inode_block(inode, iloc.bh->b_blocknr, EIO, |
| "IO error syncing inode"); |
| err = -EIO; |
| } |
| brelse(iloc.bh); |
| } |
| return err; |
| } |
| |
| /* |
| * In data=journal mode ext4_journalled_invalidate_folio() may fail to invalidate |
| * buffers that are attached to a folio straddling i_size and are undergoing |
| * commit. In that case we have to wait for commit to finish and try again. |
| */ |
| static void ext4_wait_for_tail_page_commit(struct inode *inode) |
| { |
| unsigned offset; |
| journal_t *journal = EXT4_SB(inode->i_sb)->s_journal; |
| tid_t commit_tid = 0; |
| int ret; |
| |
| offset = inode->i_size & (PAGE_SIZE - 1); |
| /* |
| * If the folio is fully truncated, we don't need to wait for any commit |
| * (and we even should not as __ext4_journalled_invalidate_folio() may |
| * strip all buffers from the folio but keep the folio dirty which can then |
| * confuse e.g. concurrent ext4_writepages() seeing dirty folio without |
| * buffers). Also we don't need to wait for any commit if all buffers in |
| * the folio remain valid. This is most beneficial for the common case of |
| * blocksize == PAGESIZE. |
| */ |
| if (!offset || offset > (PAGE_SIZE - i_blocksize(inode))) |
| return; |
| while (1) { |
| struct folio *folio = filemap_lock_folio(inode->i_mapping, |
| inode->i_size >> PAGE_SHIFT); |
| if (IS_ERR(folio)) |
| return; |
| ret = __ext4_journalled_invalidate_folio(folio, offset, |
| folio_size(folio) - offset); |
| folio_unlock(folio); |
| folio_put(folio); |
| if (ret != -EBUSY) |
| return; |
| commit_tid = 0; |
| read_lock(&journal->j_state_lock); |
| if (journal->j_committing_transaction) |
| commit_tid = journal->j_committing_transaction->t_tid; |
| read_unlock(&journal->j_state_lock); |
| if (commit_tid) |
| jbd2_log_wait_commit(journal, commit_tid); |
| } |
| } |
| |
| /* |
| * ext4_setattr() |
| * |
| * Called from notify_change. |
| * |
| * We want to trap VFS attempts to truncate the file as soon as |
| * possible. In particular, we want to make sure that when the VFS |
| * shrinks i_size, we put the inode on the orphan list and modify |
| * i_disksize immediately, so that during the subsequent flushing of |
| * dirty pages and freeing of disk blocks, we can guarantee that any |
| * commit will leave the blocks being flushed in an unused state on |
| * disk. (On recovery, the inode will get truncated and the blocks will |
| * be freed, so we have a strong guarantee that no future commit will |
| * leave these blocks visible to the user.) |
| * |
| * Another thing we have to assure is that if we are in ordered mode |
| * and inode is still attached to the committing transaction, we must |
| * we start writeout of all the dirty pages which are being truncated. |
| * This way we are sure that all the data written in the previous |
| * transaction are already on disk (truncate waits for pages under |
| * writeback). |
| * |
| * Called with inode->i_rwsem down. |
| */ |
| int ext4_setattr(struct mnt_idmap *idmap, struct dentry *dentry, |
| struct iattr *attr) |
| { |
| struct inode *inode = d_inode(dentry); |
| int error, rc = 0; |
| int orphan = 0; |
| const unsigned int ia_valid = attr->ia_valid; |
| bool inc_ivers = true; |
| |
| if (unlikely(ext4_forced_shutdown(inode->i_sb))) |
| return -EIO; |
| |
| if (unlikely(IS_IMMUTABLE(inode))) |
| return -EPERM; |
| |
| if (unlikely(IS_APPEND(inode) && |
| (ia_valid & (ATTR_MODE | ATTR_UID | |
| ATTR_GID | ATTR_TIMES_SET)))) |
| return -EPERM; |
| |
| error = setattr_prepare(idmap, dentry, attr); |
| if (error) |
| return error; |
| |
| error = fscrypt_prepare_setattr(dentry, attr); |
| if (error) |
| return error; |
| |
| error = fsverity_prepare_setattr(dentry, attr); |
| if (error) |
| return error; |
| |
| if (is_quota_modification(idmap, inode, attr)) { |
| error = dquot_initialize(inode); |
| if (error) |
| return error; |
| } |
| |
| if (i_uid_needs_update(idmap, attr, inode) || |
| i_gid_needs_update(idmap, attr, inode)) { |
| handle_t *handle; |
| |
| /* (user+group)*(old+new) structure, inode write (sb, |
| * inode block, ? - but truncate inode update has it) */ |
| handle = ext4_journal_start(inode, EXT4_HT_QUOTA, |
| (EXT4_MAXQUOTAS_INIT_BLOCKS(inode->i_sb) + |
| EXT4_MAXQUOTAS_DEL_BLOCKS(inode->i_sb)) + 3); |
| if (IS_ERR(handle)) { |
| error = PTR_ERR(handle); |
| goto err_out; |
| } |
| |
| /* dquot_transfer() calls back ext4_get_inode_usage() which |
| * counts xattr inode references. |
| */ |
| down_read(&EXT4_I(inode)->xattr_sem); |
| error = dquot_transfer(idmap, inode, attr); |
| up_read(&EXT4_I(inode)->xattr_sem); |
| |
| if (error) { |
| ext4_journal_stop(handle); |
| return error; |
| } |
| /* Update corresponding info in inode so that everything is in |
| * one transaction */ |
| i_uid_update(idmap, attr, inode); |
| i_gid_update(idmap, attr, inode); |
| error = ext4_mark_inode_dirty(handle, inode); |
| ext4_journal_stop(handle); |
| if (unlikely(error)) { |
| return error; |
| } |
| } |
| |
| if (attr->ia_valid & ATTR_SIZE) { |
| handle_t *handle; |
| loff_t oldsize = inode->i_size; |
| loff_t old_disksize; |
| int shrink = (attr->ia_size < inode->i_size); |
| |
| if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| |
| if (attr->ia_size > sbi->s_bitmap_maxbytes) { |
| return -EFBIG; |
| } |
| } |
| if (!S_ISREG(inode->i_mode)) { |
| return -EINVAL; |
| } |
| |
| if (attr->ia_size == inode->i_size) |
| inc_ivers = false; |
| |
| if (shrink) { |
| if (ext4_should_order_data(inode)) { |
| error = ext4_begin_ordered_truncate(inode, |
| attr->ia_size); |
| if (error) |
| goto err_out; |
| } |
| /* |
| * Blocks are going to be removed from the inode. Wait |
| * for dio in flight. |
| */ |
| inode_dio_wait(inode); |
| } |
| |
| filemap_invalidate_lock(inode->i_mapping); |
| |
| rc = ext4_break_layouts(inode); |
| if (rc) { |
| filemap_invalidate_unlock(inode->i_mapping); |
| goto err_out; |
| } |
| |
| if (attr->ia_size != inode->i_size) { |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, 3); |
| if (IS_ERR(handle)) { |
| error = PTR_ERR(handle); |
| goto out_mmap_sem; |
| } |
| if (ext4_handle_valid(handle) && shrink) { |
| error = ext4_orphan_add(handle, inode); |
| orphan = 1; |
| } |
| /* |
| * Update c/mtime on truncate up, ext4_truncate() will |
| * update c/mtime in shrink case below |
| */ |
| if (!shrink) |
| inode_set_mtime_to_ts(inode, |
| inode_set_ctime_current(inode)); |
| |
| if (shrink) |
| ext4_fc_track_range(handle, inode, |
| (attr->ia_size > 0 ? attr->ia_size - 1 : 0) >> |
| inode->i_sb->s_blocksize_bits, |
| EXT_MAX_BLOCKS - 1); |
| else |
| ext4_fc_track_range( |
| handle, inode, |
| (oldsize > 0 ? oldsize - 1 : oldsize) >> |
| inode->i_sb->s_blocksize_bits, |
| (attr->ia_size > 0 ? attr->ia_size - 1 : 0) >> |
| inode->i_sb->s_blocksize_bits); |
| |
| down_write(&EXT4_I(inode)->i_data_sem); |
| old_disksize = EXT4_I(inode)->i_disksize; |
| EXT4_I(inode)->i_disksize = attr->ia_size; |
| rc = ext4_mark_inode_dirty(handle, inode); |
| if (!error) |
| error = rc; |
| /* |
| * We have to update i_size under i_data_sem together |
| * with i_disksize to avoid races with writeback code |
| * running ext4_wb_update_i_disksize(). |
| */ |
| if (!error) |
| i_size_write(inode, attr->ia_size); |
| else |
| EXT4_I(inode)->i_disksize = old_disksize; |
| up_write(&EXT4_I(inode)->i_data_sem); |
| ext4_journal_stop(handle); |
| if (error) |
| goto out_mmap_sem; |
| if (!shrink) { |
| pagecache_isize_extended(inode, oldsize, |
| inode->i_size); |
| } else if (ext4_should_journal_data(inode)) { |
| ext4_wait_for_tail_page_commit(inode); |
| } |
| } |
| |
| /* |
| * Truncate pagecache after we've waited for commit |
| * in data=journal mode to make pages freeable. |
| */ |
| truncate_pagecache(inode, inode->i_size); |
| /* |
| * Call ext4_truncate() even if i_size didn't change to |
| * truncate possible preallocated blocks. |
| */ |
| if (attr->ia_size <= oldsize) { |
| rc = ext4_truncate(inode); |
| if (rc) |
| error = rc; |
| } |
| out_mmap_sem: |
| filemap_invalidate_unlock(inode->i_mapping); |
| } |
| |
| if (!error) { |
| if (inc_ivers) |
| inode_inc_iversion(inode); |
| setattr_copy(idmap, inode, attr); |
| mark_inode_dirty(inode); |
| } |
| |
| /* |
| * If the call to ext4_truncate failed to get a transaction handle at |
| * all, we need to clean up the in-core orphan list manually. |
| */ |
| if (orphan && inode->i_nlink) |
| ext4_orphan_del(NULL, inode); |
| |
| if (!error && (ia_valid & ATTR_MODE)) |
| rc = posix_acl_chmod(idmap, dentry, inode->i_mode); |
| |
| err_out: |
| if (error) |
| ext4_std_error(inode->i_sb, error); |
| if (!error) |
| error = rc; |
| return error; |
| } |
| |
| u32 ext4_dio_alignment(struct inode *inode) |
| { |
| if (fsverity_active(inode)) |
| return 0; |
| if (ext4_should_journal_data(inode)) |
| return 0; |
| if (ext4_has_inline_data(inode)) |
| return 0; |
| if (IS_ENCRYPTED(inode)) { |
| if (!fscrypt_dio_supported(inode)) |
| return 0; |
| return i_blocksize(inode); |
| } |
| return 1; /* use the iomap defaults */ |
| } |
| |
| int ext4_getattr(struct mnt_idmap *idmap, const struct path *path, |
| struct kstat *stat, u32 request_mask, unsigned int query_flags) |
| { |
| struct inode *inode = d_inode(path->dentry); |
| struct ext4_inode *raw_inode; |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| unsigned int flags; |
| |
| if ((request_mask & STATX_BTIME) && |
| EXT4_FITS_IN_INODE(raw_inode, ei, i_crtime)) { |
| stat->result_mask |= STATX_BTIME; |
| stat->btime.tv_sec = ei->i_crtime.tv_sec; |
| stat->btime.tv_nsec = ei->i_crtime.tv_nsec; |
| } |
| |
| /* |
| * Return the DIO alignment restrictions if requested. We only return |
| * this information when requested, since on encrypted files it might |
| * take a fair bit of work to get if the file wasn't opened recently. |
| */ |
| if ((request_mask & STATX_DIOALIGN) && S_ISREG(inode->i_mode)) { |
| u32 dio_align = ext4_dio_alignment(inode); |
| |
| stat->result_mask |= STATX_DIOALIGN; |
| if (dio_align == 1) { |
| struct block_device *bdev = inode->i_sb->s_bdev; |
| |
| /* iomap defaults */ |
| stat->dio_mem_align = bdev_dma_alignment(bdev) + 1; |
| stat->dio_offset_align = bdev_logical_block_size(bdev); |
| } else { |
| stat->dio_mem_align = dio_align; |
| stat->dio_offset_align = dio_align; |
| } |
| } |
| |
| flags = ei->i_flags & EXT4_FL_USER_VISIBLE; |
| if (flags & EXT4_APPEND_FL) |
| stat->attributes |= STATX_ATTR_APPEND; |
| if (flags & EXT4_COMPR_FL) |
| stat->attributes |= STATX_ATTR_COMPRESSED; |
| if (flags & EXT4_ENCRYPT_FL) |
| stat->attributes |= STATX_ATTR_ENCRYPTED; |
| if (flags & EXT4_IMMUTABLE_FL) |
| stat->attributes |= STATX_ATTR_IMMUTABLE; |
| if (flags & EXT4_NODUMP_FL) |
| stat->attributes |= STATX_ATTR_NODUMP; |
| if (flags & EXT4_VERITY_FL) |
| stat->attributes |= STATX_ATTR_VERITY; |
| |
| stat->attributes_mask |= (STATX_ATTR_APPEND | |
| STATX_ATTR_COMPRESSED | |
| STATX_ATTR_ENCRYPTED | |
| STATX_ATTR_IMMUTABLE | |
| STATX_ATTR_NODUMP | |
| STATX_ATTR_VERITY); |
| |
| generic_fillattr(idmap, request_mask, inode, stat); |
| return 0; |
| } |
| |
| int ext4_file_getattr(struct mnt_idmap *idmap, |
| const struct path *path, struct kstat *stat, |
| u32 request_mask, unsigned int query_flags) |
| { |
| struct inode *inode = d_inode(path->dentry); |
| u64 delalloc_blocks; |
| |
| ext4_getattr(idmap, path, stat, request_mask, query_flags); |
| |
| /* |
| * If there is inline data in the inode, the inode will normally not |
| * have data blocks allocated (it may have an external xattr block). |
| * Report at least one sector for such files, so tools like tar, rsync, |
| * others don't incorrectly think the file is completely sparse. |
| */ |
| if (unlikely(ext4_has_inline_data(inode))) |
| stat->blocks += (stat->size + 511) >> 9; |
| |
| /* |
| * We can't update i_blocks if the block allocation is delayed |
| * otherwise in the case of system crash before the real block |
| * allocation is done, we will have i_blocks inconsistent with |
| * on-disk file blocks. |
| * We always keep i_blocks updated together with real |
| * allocation. But to not confuse with user, stat |
| * will return the blocks that include the delayed allocation |
| * blocks for this file. |
| */ |
| delalloc_blocks = EXT4_C2B(EXT4_SB(inode->i_sb), |
| EXT4_I(inode)->i_reserved_data_blocks); |
| stat->blocks += delalloc_blocks << (inode->i_sb->s_blocksize_bits - 9); |
| return 0; |
| } |
| |
| static int ext4_index_trans_blocks(struct inode *inode, int lblocks, |
| int pextents) |
| { |
| if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) |
| return ext4_ind_trans_blocks(inode, lblocks); |
| return ext4_ext_index_trans_blocks(inode, pextents); |
| } |
| |
| /* |
| * Account for index blocks, block groups bitmaps and block group |
| * descriptor blocks if modify datablocks and index blocks |
| * worse case, the indexs blocks spread over different block groups |
| * |
| * If datablocks are discontiguous, they are possible to spread over |
| * different block groups too. If they are contiguous, with flexbg, |
| * they could still across block group boundary. |
| * |
| * Also account for superblock, inode, quota and xattr blocks |
| */ |
| static int ext4_meta_trans_blocks(struct inode *inode, int lblocks, |
| int pextents) |
| { |
| ext4_group_t groups, ngroups = ext4_get_groups_count(inode->i_sb); |
| int gdpblocks; |
| int idxblocks; |
| int ret; |
| |
| /* |
| * How many index blocks need to touch to map @lblocks logical blocks |
| * to @pextents physical extents? |
| */ |
| idxblocks = ext4_index_trans_blocks(inode, lblocks, pextents); |
| |
| ret = idxblocks; |
| |
| /* |
| * Now let's see how many group bitmaps and group descriptors need |
| * to account |
| */ |
| groups = idxblocks + pextents; |
| gdpblocks = groups; |
| if (groups > ngroups) |
| groups = ngroups; |
| if (groups > EXT4_SB(inode->i_sb)->s_gdb_count) |
| gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count; |
| |
| /* bitmaps and block group descriptor blocks */ |
| ret += groups + gdpblocks; |
| |
| /* Blocks for super block, inode, quota and xattr blocks */ |
| ret += EXT4_META_TRANS_BLOCKS(inode->i_sb); |
| |
| return ret; |
| } |
| |
| /* |
| * Calculate the total number of credits to reserve to fit |
| * the modification of a single pages into a single transaction, |
| * which may include multiple chunks of block allocations. |
| * |
| * This could be called via ext4_write_begin() |
| * |
| * We need to consider the worse case, when |
| * one new block per extent. |
| */ |
| int ext4_writepage_trans_blocks(struct inode *inode) |
| { |
| int bpp = ext4_journal_blocks_per_page(inode); |
| int ret; |
| |
| ret = ext4_meta_trans_blocks(inode, bpp, bpp); |
| |
| /* Account for data blocks for journalled mode */ |
| if (ext4_should_journal_data(inode)) |
| ret += bpp; |
| return ret; |
| } |
| |
| /* |
| * Calculate the journal credits for a chunk of data modification. |
| * |
| * This is called from DIO, fallocate or whoever calling |
| * ext4_map_blocks() to map/allocate a chunk of contiguous disk blocks. |
| * |
| * journal buffers for data blocks are not included here, as DIO |
| * and fallocate do no need to journal data buffers. |
| */ |
| int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks) |
| { |
| return ext4_meta_trans_blocks(inode, nrblocks, 1); |
| } |
| |
| /* |
| * The caller must have previously called ext4_reserve_inode_write(). |
| * Give this, we know that the caller already has write access to iloc->bh. |
| */ |
| int ext4_mark_iloc_dirty(handle_t *handle, |
| struct inode *inode, struct ext4_iloc *iloc) |
| { |
| int err = 0; |
| |
| if (unlikely(ext4_forced_shutdown(inode->i_sb))) { |
| put_bh(iloc->bh); |
| return -EIO; |
| } |
| ext4_fc_track_inode(handle, inode); |
| |
| /* the do_update_inode consumes one bh->b_count */ |
| get_bh(iloc->bh); |
| |
| /* ext4_do_update_inode() does jbd2_journal_dirty_metadata */ |
| err = ext4_do_update_inode(handle, inode, iloc); |
| put_bh(iloc->bh); |
| return err; |
| } |
| |
| /* |
| * On success, We end up with an outstanding reference count against |
| * iloc->bh. This _must_ be cleaned up later. |
| */ |
| |
| int |
| ext4_reserve_inode_write(handle_t *handle, struct inode *inode, |
| struct ext4_iloc *iloc) |
| { |
| int err; |
| |
| if (unlikely(ext4_forced_shutdown(inode->i_sb))) |
| return -EIO; |
| |
| err = ext4_get_inode_loc(inode, iloc); |
| if (!err) { |
| BUFFER_TRACE(iloc->bh, "get_write_access"); |
| err = ext4_journal_get_write_access(handle, inode->i_sb, |
| iloc->bh, EXT4_JTR_NONE); |
| if (err) { |
| brelse(iloc->bh); |
| iloc->bh = NULL; |
| } |
| } |
| ext4_std_error(inode->i_sb, err); |
| return err; |
| } |
| |
| static int __ext4_expand_extra_isize(struct inode *inode, |
| unsigned int new_extra_isize, |
| struct ext4_iloc *iloc, |
| handle_t *handle, int *no_expand) |
| { |
| struct ext4_inode *raw_inode; |
| struct ext4_xattr_ibody_header *header; |
| unsigned int inode_size = EXT4_INODE_SIZE(inode->i_sb); |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| int error; |
| |
| /* this was checked at iget time, but double check for good measure */ |
| if ((EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > inode_size) || |
| (ei->i_extra_isize & 3)) { |
| EXT4_ERROR_INODE(inode, "bad extra_isize %u (inode size %u)", |
| ei->i_extra_isize, |
| EXT4_INODE_SIZE(inode->i_sb)); |
| return -EFSCORRUPTED; |
| } |
| if ((new_extra_isize < ei->i_extra_isize) || |
| (new_extra_isize < 4) || |
| (new_extra_isize > inode_size - EXT4_GOOD_OLD_INODE_SIZE)) |
| return -EINVAL; /* Should never happen */ |
| |
| raw_inode = ext4_raw_inode(iloc); |
| |
| header = IHDR(inode, raw_inode); |
| |
| /* No extended attributes present */ |
| if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR) || |
| header->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC)) { |
| memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + |
| EXT4_I(inode)->i_extra_isize, 0, |
| new_extra_isize - EXT4_I(inode)->i_extra_isize); |
| EXT4_I(inode)->i_extra_isize = new_extra_isize; |
| return 0; |
| } |
| |
| /* |
| * We may need to allocate external xattr block so we need quotas |
| * initialized. Here we can be called with various locks held so we |
| * cannot affort to initialize quotas ourselves. So just bail. |
| */ |
| if (dquot_initialize_needed(inode)) |
| return -EAGAIN; |
| |
| /* try to expand with EAs present */ |
| error = ext4_expand_extra_isize_ea(inode, new_extra_isize, |
| raw_inode, handle); |
| if (error) { |
| /* |
| * Inode size expansion failed; don't try again |
| */ |
| *no_expand = 1; |
| } |
| |
| return error; |
| } |
| |
| /* |
| * Expand an inode by new_extra_isize bytes. |
| * Returns 0 on success or negative error number on failure. |
| */ |
| static int ext4_try_to_expand_extra_isize(struct inode *inode, |
| unsigned int new_extra_isize, |
| struct ext4_iloc iloc, |
| handle_t *handle) |
| { |
| int no_expand; |
| int error; |
| |
| if (ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND)) |
| return -EOVERFLOW; |
| |
| /* |
| * In nojournal mode, we can immediately attempt to expand |
| * the inode. When journaled, we first need to obtain extra |
| * buffer credits since we may write into the EA block |
| * with this same handle. If journal_extend fails, then it will |
| * only result in a minor loss of functionality for that inode. |
| * If this is felt to be critical, then e2fsck should be run to |
| * force a large enough s_min_extra_isize. |
| */ |
| if (ext4_journal_extend(handle, |
| EXT4_DATA_TRANS_BLOCKS(inode->i_sb), 0) != 0) |
| return -ENOSPC; |
| |
| if (ext4_write_trylock_xattr(inode, &no_expand) == 0) |
| return -EBUSY; |
| |
| error = __ext4_expand_extra_isize(inode, new_extra_isize, &iloc, |
| handle, &no_expand); |
| ext4_write_unlock_xattr(inode, &no_expand); |
| |
| return error; |
| } |
| |
| int ext4_expand_extra_isize(struct inode *inode, |
| unsigned int new_extra_isize, |
| struct ext4_iloc *iloc) |
| { |
| handle_t *handle; |
| int no_expand; |
| int error, rc; |
| |
| if (ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND)) { |
| brelse(iloc->bh); |
| return -EOVERFLOW; |
| } |
| |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, |
| EXT4_DATA_TRANS_BLOCKS(inode->i_sb)); |
| if (IS_ERR(handle)) { |
| error = PTR_ERR(handle); |
| brelse(iloc->bh); |
| return error; |
| } |
| |
| ext4_write_lock_xattr(inode, &no_expand); |
| |
| BUFFER_TRACE(iloc->bh, "get_write_access"); |
| error = ext4_journal_get_write_access(handle, inode->i_sb, iloc->bh, |
| EXT4_JTR_NONE); |
| if (error) { |
| brelse(iloc->bh); |
| goto out_unlock; |
| } |
| |
| error = __ext4_expand_extra_isize(inode, new_extra_isize, iloc, |
| handle, &no_expand); |
| |
| rc = ext4_mark_iloc_dirty(handle, inode, iloc); |
| if (!error) |
| error = rc; |
| |
| out_unlock: |
| ext4_write_unlock_xattr(inode, &no_expand); |
| ext4_journal_stop(handle); |
| return error; |
| } |
| |
| /* |
| * What we do here is to mark the in-core inode as clean with respect to inode |
| * dirtiness (it may still be data-dirty). |
| * This means that the in-core inode may be reaped by prune_icache |
| * without having to perform any I/O. This is a very good thing, |
| * because *any* task may call prune_icache - even ones which |
| * have a transaction open against a different journal. |
| * |
| * Is this cheating? Not really. Sure, we haven't written the |
| * inode out, but prune_icache isn't a user-visible syncing function. |
| * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) |
| * we start and wait on commits. |
| */ |
| int __ext4_mark_inode_dirty(handle_t *handle, struct inode *inode, |
| const char *func, unsigned int line) |
| { |
| struct ext4_iloc iloc; |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| int err; |
| |
| might_sleep(); |
| trace_ext4_mark_inode_dirty(inode, _RET_IP_); |
| err = ext4_reserve_inode_write(handle, inode, &iloc); |
| if (err) |
| goto out; |
| |
| if (EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize) |
| ext4_try_to_expand_extra_isize(inode, sbi->s_want_extra_isize, |
| iloc, handle); |
| |
| err = ext4_mark_iloc_dirty(handle, inode, &iloc); |
| out: |
| if (unlikely(err)) |
| ext4_error_inode_err(inode, func, line, 0, err, |
| "mark_inode_dirty error"); |
| return err; |
| } |
| |
| /* |
| * ext4_dirty_inode() is called from __mark_inode_dirty() |
| * |
| * We're really interested in the case where a file is being extended. |
| * i_size has been changed by generic_commit_write() and we thus need |
| * to include the updated inode in the current transaction. |
| * |
| * Also, dquot_alloc_block() will always dirty the inode when blocks |
| * are allocated to the file. |
| * |
| * If the inode is marked synchronous, we don't honour that here - doing |
| * so would cause a commit on atime updates, which we don't bother doing. |
| * We handle synchronous inodes at the highest possible level. |
| */ |
| void ext4_dirty_inode(struct inode *inode, int flags) |
| { |
| handle_t *handle; |
| |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, 2); |
| if (IS_ERR(handle)) |
| return; |
| ext4_mark_inode_dirty(handle, inode); |
| ext4_journal_stop(handle); |
| } |
| |
| int ext4_change_inode_journal_flag(struct inode *inode, int val) |
| { |
| journal_t *journal; |
| handle_t *handle; |
| int err; |
| int alloc_ctx; |
| |
| /* |
| * We have to be very careful here: changing a data block's |
| * journaling status dynamically is dangerous. If we write a |
| * data block to the journal, change the status and then delete |
| * that block, we risk forgetting to revoke the old log record |
| * from the journal and so a subsequent replay can corrupt data. |
| * So, first we make sure that the journal is empty and that |
| * nobody is changing anything. |
| */ |
| |
| journal = EXT4_JOURNAL(inode); |
| if (!journal) |
| return 0; |
| if (is_journal_aborted(journal)) |
| return -EROFS; |
| |
| /* Wait for all existing dio workers */ |
| inode_dio_wait(inode); |
| |
| /* |
| * Before flushing the journal and switching inode's aops, we have |
| * to flush all dirty data the inode has. There can be outstanding |
| * delayed allocations, there can be unwritten extents created by |
| * fallocate or buffered writes in dioread_nolock mode covered by |
| * dirty data which can be converted only after flushing the dirty |
| * data (and journalled aops don't know how to handle these cases). |
| */ |
| if (val) { |
| filemap_invalidate_lock(inode->i_mapping); |
| err = filemap_write_and_wait(inode->i_mapping); |
| if (err < 0) { |
| filemap_invalidate_unlock(inode->i_mapping); |
| return err; |
| } |
| } |
| |
| alloc_ctx = ext4_writepages_down_write(inode->i_sb); |
| jbd2_journal_lock_updates(journal); |
| |
| /* |
| * OK, there are no updates running now, and all cached data is |
| * synced to disk. We are now in a completely consistent state |
| * which doesn't have anything in the journal, and we know that |
| * no filesystem updates are running, so it is safe to modify |
| * the inode's in-core data-journaling state flag now. |
| */ |
| |
| if (val) |
| ext4_set_inode_flag(inode, EXT4_INODE_JOURNAL_DATA); |
| else { |
| err = jbd2_journal_flush(journal, 0); |
| if (err < 0) { |
| jbd2_journal_unlock_updates(journal); |
| ext4_writepages_up_write(inode->i_sb, alloc_ctx); |
| return err; |
| } |
| ext4_clear_inode_flag(inode, EXT4_INODE_JOURNAL_DATA); |
| } |
| ext4_set_aops(inode); |
| |
| jbd2_journal_unlock_updates(journal); |
| ext4_writepages_up_write(inode->i_sb, alloc_ctx); |
| |
| if (val) |
| filemap_invalidate_unlock(inode->i_mapping); |
| |
| /* Finally we can mark the inode as dirty. */ |
| |
| handle = ext4_journal_start(inode, EXT4_HT_INODE, 1); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| |
| ext4_fc_mark_ineligible(inode->i_sb, |
| EXT4_FC_REASON_JOURNAL_FLAG_CHANGE, handle); |
| err = ext4_mark_inode_dirty(handle, inode); |
| ext4_handle_sync(handle); |
| ext4_journal_stop(handle); |
| ext4_std_error(inode->i_sb, err); |
| |
| return err; |
| } |
| |
| static int ext4_bh_unmapped(handle_t *handle, struct inode *inode, |
| struct buffer_head *bh) |
| { |
| return !buffer_mapped(bh); |
| } |
| |
| vm_fault_t ext4_page_mkwrite(struct vm_fault *vmf) |
| { |
| struct vm_area_struct *vma = vmf->vma; |
| struct folio *folio = page_folio(vmf->page); |
| loff_t size; |
| unsigned long len; |
| int err; |
| vm_fault_t ret; |
| struct file *file = vma->vm_file; |
| struct inode *inode = file_inode(file); |
| struct address_space *mapping = inode->i_mapping; |
| handle_t *handle; |
| get_block_t *get_block; |
| int retries = 0; |
| |
| if (unlikely(IS_IMMUTABLE(inode))) |
| return VM_FAULT_SIGBUS; |
| |
| sb_start_pagefault(inode->i_sb); |
| file_update_time(vma->vm_file); |
| |
| filemap_invalidate_lock_shared(mapping); |
| |
| err = ext4_convert_inline_data(inode); |
| if (err) |
| goto out_ret; |
| |
| /* |
| * On data journalling we skip straight to the transaction handle: |
| * there's no delalloc; page truncated will be checked later; the |
| * early return w/ all buffers mapped (calculates size/len) can't |
| * be used; and there's no dioread_nolock, so only ext4_get_block. |
| */ |
| if (ext4_should_journal_data(inode)) |
| goto retry_alloc; |
| |
| /* Delalloc case is easy... */ |
| if (test_opt(inode->i_sb, DELALLOC) && |
| !ext4_nonda_switch(inode->i_sb)) { |
| do { |
| err = block_page_mkwrite(vma, vmf, |
| ext4_da_get_block_prep); |
| } while (err == -ENOSPC && |
| ext4_should_retry_alloc(inode->i_sb, &retries)); |
| goto out_ret; |
| } |
| |
| folio_lock(folio); |
| size = i_size_read(inode); |
| /* Page got truncated from under us? */ |
| if (folio->mapping != mapping || folio_pos(folio) > size) { |
| folio_unlock(folio); |
| ret = VM_FAULT_NOPAGE; |
| goto out; |
| } |
| |
| len = folio_size(folio); |
| if (folio_pos(folio) + len > size) |
| len = size - folio_pos(folio); |
| /* |
| * Return if we have all the buffers mapped. This avoids the need to do |
| * journal_start/journal_stop which can block and take a long time |
| * |
| * This cannot be done for data journalling, as we have to add the |
| * inode to the transaction's list to writeprotect pages on commit. |
| */ |
| if (folio_buffers(folio)) { |
| if (!ext4_walk_page_buffers(NULL, inode, folio_buffers(folio), |
| 0, len, NULL, |
| ext4_bh_unmapped)) { |
| /* Wait so that we don't change page under IO */ |
| folio_wait_stable(folio); |
| ret = VM_FAULT_LOCKED; |
| goto out; |
| } |
| } |
| folio_unlock(folio); |
| /* OK, we need to fill the hole... */ |
| if (ext4_should_dioread_nolock(inode)) |
| get_block = ext4_get_block_unwritten; |
| else |
| get_block = ext4_get_block; |
| retry_alloc: |
| handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, |
| ext4_writepage_trans_blocks(inode)); |
| if (IS_ERR(handle)) { |
| ret = VM_FAULT_SIGBUS; |
| goto out; |
| } |
| /* |
| * Data journalling can't use block_page_mkwrite() because it |
| * will set_buffer_dirty() before do_journal_get_write_access() |
| * thus might hit warning messages for dirty metadata buffers. |
| */ |
| if (!ext4_should_journal_data(inode)) { |
| err = block_page_mkwrite(vma, vmf, get_block); |
| } else { |
| folio_lock(folio); |
| size = i_size_read(inode); |
| /* Page got truncated from under us? */ |
| if (folio->mapping != mapping || folio_pos(folio) > size) { |
| ret = VM_FAULT_NOPAGE; |
| goto out_error; |
| } |
| |
| len = folio_size(folio); |
| if (folio_pos(folio) + len > size) |
| len = size - folio_pos(folio); |
| |
| err = __block_write_begin(&folio->page, 0, len, ext4_get_block); |
| if (!err) { |
| ret = VM_FAULT_SIGBUS; |
| if (ext4_journal_folio_buffers(handle, folio, len)) |
| goto out_error; |
| } else { |
| folio_unlock(folio); |
| } |
| } |
| ext4_journal_stop(handle); |
| if (err == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) |
| goto retry_alloc; |
| out_ret: |
| ret = vmf_fs_error(err); |
| out: |
| filemap_invalidate_unlock_shared(mapping); |
| sb_end_pagefault(inode->i_sb); |
| return ret; |
| out_error: |
| folio_unlock(folio); |
| ext4_journal_stop(handle); |
| goto out; |
| } |