| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Simple file system for zoned block devices exposing zones as files. |
| * |
| * Copyright (C) 2022 Western Digital Corporation or its affiliates. |
| */ |
| #include <linux/module.h> |
| #include <linux/pagemap.h> |
| #include <linux/iomap.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/blkdev.h> |
| #include <linux/statfs.h> |
| #include <linux/writeback.h> |
| #include <linux/quotaops.h> |
| #include <linux/seq_file.h> |
| #include <linux/parser.h> |
| #include <linux/uio.h> |
| #include <linux/mman.h> |
| #include <linux/sched/mm.h> |
| #include <linux/task_io_accounting_ops.h> |
| |
| #include "zonefs.h" |
| |
| #include "trace.h" |
| |
| static int zonefs_read_iomap_begin(struct inode *inode, loff_t offset, |
| loff_t length, unsigned int flags, |
| struct iomap *iomap, struct iomap *srcmap) |
| { |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| struct super_block *sb = inode->i_sb; |
| loff_t isize; |
| |
| /* |
| * All blocks are always mapped below EOF. If reading past EOF, |
| * act as if there is a hole up to the file maximum size. |
| */ |
| mutex_lock(&zi->i_truncate_mutex); |
| iomap->bdev = inode->i_sb->s_bdev; |
| iomap->offset = ALIGN_DOWN(offset, sb->s_blocksize); |
| isize = i_size_read(inode); |
| if (iomap->offset >= isize) { |
| iomap->type = IOMAP_HOLE; |
| iomap->addr = IOMAP_NULL_ADDR; |
| iomap->length = length; |
| } else { |
| iomap->type = IOMAP_MAPPED; |
| iomap->addr = (z->z_sector << SECTOR_SHIFT) + iomap->offset; |
| iomap->length = isize - iomap->offset; |
| } |
| mutex_unlock(&zi->i_truncate_mutex); |
| |
| trace_zonefs_iomap_begin(inode, iomap); |
| |
| return 0; |
| } |
| |
| static const struct iomap_ops zonefs_read_iomap_ops = { |
| .iomap_begin = zonefs_read_iomap_begin, |
| }; |
| |
| static int zonefs_write_iomap_begin(struct inode *inode, loff_t offset, |
| loff_t length, unsigned int flags, |
| struct iomap *iomap, struct iomap *srcmap) |
| { |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| struct super_block *sb = inode->i_sb; |
| loff_t isize; |
| |
| /* All write I/Os should always be within the file maximum size */ |
| if (WARN_ON_ONCE(offset + length > z->z_capacity)) |
| return -EIO; |
| |
| /* |
| * Sequential zones can only accept direct writes. This is already |
| * checked when writes are issued, so warn if we see a page writeback |
| * operation. |
| */ |
| if (WARN_ON_ONCE(zonefs_zone_is_seq(z) && !(flags & IOMAP_DIRECT))) |
| return -EIO; |
| |
| /* |
| * For conventional zones, all blocks are always mapped. For sequential |
| * zones, all blocks after always mapped below the inode size (zone |
| * write pointer) and unwriten beyond. |
| */ |
| mutex_lock(&zi->i_truncate_mutex); |
| iomap->bdev = inode->i_sb->s_bdev; |
| iomap->offset = ALIGN_DOWN(offset, sb->s_blocksize); |
| iomap->addr = (z->z_sector << SECTOR_SHIFT) + iomap->offset; |
| isize = i_size_read(inode); |
| if (iomap->offset >= isize) { |
| iomap->type = IOMAP_UNWRITTEN; |
| iomap->length = z->z_capacity - iomap->offset; |
| } else { |
| iomap->type = IOMAP_MAPPED; |
| iomap->length = isize - iomap->offset; |
| } |
| mutex_unlock(&zi->i_truncate_mutex); |
| |
| trace_zonefs_iomap_begin(inode, iomap); |
| |
| return 0; |
| } |
| |
| static const struct iomap_ops zonefs_write_iomap_ops = { |
| .iomap_begin = zonefs_write_iomap_begin, |
| }; |
| |
| static int zonefs_read_folio(struct file *unused, struct folio *folio) |
| { |
| return iomap_read_folio(folio, &zonefs_read_iomap_ops); |
| } |
| |
| static void zonefs_readahead(struct readahead_control *rac) |
| { |
| iomap_readahead(rac, &zonefs_read_iomap_ops); |
| } |
| |
| /* |
| * Map blocks for page writeback. This is used only on conventional zone files, |
| * which implies that the page range can only be within the fixed inode size. |
| */ |
| static int zonefs_write_map_blocks(struct iomap_writepage_ctx *wpc, |
| struct inode *inode, loff_t offset, |
| unsigned int len) |
| { |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| |
| if (WARN_ON_ONCE(zonefs_zone_is_seq(z))) |
| return -EIO; |
| if (WARN_ON_ONCE(offset >= i_size_read(inode))) |
| return -EIO; |
| |
| /* If the mapping is already OK, nothing needs to be done */ |
| if (offset >= wpc->iomap.offset && |
| offset < wpc->iomap.offset + wpc->iomap.length) |
| return 0; |
| |
| return zonefs_write_iomap_begin(inode, offset, |
| z->z_capacity - offset, |
| IOMAP_WRITE, &wpc->iomap, NULL); |
| } |
| |
| static const struct iomap_writeback_ops zonefs_writeback_ops = { |
| .map_blocks = zonefs_write_map_blocks, |
| }; |
| |
| static int zonefs_writepages(struct address_space *mapping, |
| struct writeback_control *wbc) |
| { |
| struct iomap_writepage_ctx wpc = { }; |
| |
| return iomap_writepages(mapping, wbc, &wpc, &zonefs_writeback_ops); |
| } |
| |
| static int zonefs_swap_activate(struct swap_info_struct *sis, |
| struct file *swap_file, sector_t *span) |
| { |
| struct inode *inode = file_inode(swap_file); |
| |
| if (zonefs_inode_is_seq(inode)) { |
| zonefs_err(inode->i_sb, |
| "swap file: not a conventional zone file\n"); |
| return -EINVAL; |
| } |
| |
| return iomap_swapfile_activate(sis, swap_file, span, |
| &zonefs_read_iomap_ops); |
| } |
| |
| const struct address_space_operations zonefs_file_aops = { |
| .read_folio = zonefs_read_folio, |
| .readahead = zonefs_readahead, |
| .writepages = zonefs_writepages, |
| .dirty_folio = iomap_dirty_folio, |
| .release_folio = iomap_release_folio, |
| .invalidate_folio = iomap_invalidate_folio, |
| .migrate_folio = filemap_migrate_folio, |
| .is_partially_uptodate = iomap_is_partially_uptodate, |
| .error_remove_folio = generic_error_remove_folio, |
| .swap_activate = zonefs_swap_activate, |
| }; |
| |
| int zonefs_file_truncate(struct inode *inode, loff_t isize) |
| { |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| loff_t old_isize; |
| enum req_op op; |
| int ret = 0; |
| |
| /* |
| * Only sequential zone files can be truncated and truncation is allowed |
| * only down to a 0 size, which is equivalent to a zone reset, and to |
| * the maximum file size, which is equivalent to a zone finish. |
| */ |
| if (!zonefs_zone_is_seq(z)) |
| return -EPERM; |
| |
| if (!isize) |
| op = REQ_OP_ZONE_RESET; |
| else if (isize == z->z_capacity) |
| op = REQ_OP_ZONE_FINISH; |
| else |
| return -EPERM; |
| |
| inode_dio_wait(inode); |
| |
| /* Serialize against page faults */ |
| filemap_invalidate_lock(inode->i_mapping); |
| |
| /* Serialize against zonefs_iomap_begin() */ |
| mutex_lock(&zi->i_truncate_mutex); |
| |
| old_isize = i_size_read(inode); |
| if (isize == old_isize) |
| goto unlock; |
| |
| ret = zonefs_inode_zone_mgmt(inode, op); |
| if (ret) |
| goto unlock; |
| |
| /* |
| * If the mount option ZONEFS_MNTOPT_EXPLICIT_OPEN is set, |
| * take care of open zones. |
| */ |
| if (z->z_flags & ZONEFS_ZONE_OPEN) { |
| /* |
| * Truncating a zone to EMPTY or FULL is the equivalent of |
| * closing the zone. For a truncation to 0, we need to |
| * re-open the zone to ensure new writes can be processed. |
| * For a truncation to the maximum file size, the zone is |
| * closed and writes cannot be accepted anymore, so clear |
| * the open flag. |
| */ |
| if (!isize) |
| ret = zonefs_inode_zone_mgmt(inode, REQ_OP_ZONE_OPEN); |
| else |
| z->z_flags &= ~ZONEFS_ZONE_OPEN; |
| } |
| |
| zonefs_update_stats(inode, isize); |
| truncate_setsize(inode, isize); |
| z->z_wpoffset = isize; |
| zonefs_inode_account_active(inode); |
| |
| unlock: |
| mutex_unlock(&zi->i_truncate_mutex); |
| filemap_invalidate_unlock(inode->i_mapping); |
| |
| return ret; |
| } |
| |
| static int zonefs_file_fsync(struct file *file, loff_t start, loff_t end, |
| int datasync) |
| { |
| struct inode *inode = file_inode(file); |
| int ret = 0; |
| |
| if (unlikely(IS_IMMUTABLE(inode))) |
| return -EPERM; |
| |
| /* |
| * Since only direct writes are allowed in sequential files, page cache |
| * flush is needed only for conventional zone files. |
| */ |
| if (zonefs_inode_is_cnv(inode)) |
| ret = file_write_and_wait_range(file, start, end); |
| if (!ret) |
| ret = blkdev_issue_flush(inode->i_sb->s_bdev); |
| |
| if (ret) |
| zonefs_io_error(inode, true); |
| |
| return ret; |
| } |
| |
| static vm_fault_t zonefs_filemap_page_mkwrite(struct vm_fault *vmf) |
| { |
| struct inode *inode = file_inode(vmf->vma->vm_file); |
| vm_fault_t ret; |
| |
| if (unlikely(IS_IMMUTABLE(inode))) |
| return VM_FAULT_SIGBUS; |
| |
| /* |
| * Sanity check: only conventional zone files can have shared |
| * writeable mappings. |
| */ |
| if (zonefs_inode_is_seq(inode)) |
| return VM_FAULT_NOPAGE; |
| |
| sb_start_pagefault(inode->i_sb); |
| file_update_time(vmf->vma->vm_file); |
| |
| /* Serialize against truncates */ |
| filemap_invalidate_lock_shared(inode->i_mapping); |
| ret = iomap_page_mkwrite(vmf, &zonefs_write_iomap_ops); |
| filemap_invalidate_unlock_shared(inode->i_mapping); |
| |
| sb_end_pagefault(inode->i_sb); |
| return ret; |
| } |
| |
| static const struct vm_operations_struct zonefs_file_vm_ops = { |
| .fault = filemap_fault, |
| .map_pages = filemap_map_pages, |
| .page_mkwrite = zonefs_filemap_page_mkwrite, |
| }; |
| |
| static int zonefs_file_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| /* |
| * Conventional zones accept random writes, so their files can support |
| * shared writable mappings. For sequential zone files, only read |
| * mappings are possible since there are no guarantees for write |
| * ordering between msync() and page cache writeback. |
| */ |
| if (zonefs_inode_is_seq(file_inode(file)) && |
| (vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_MAYWRITE)) |
| return -EINVAL; |
| |
| file_accessed(file); |
| vma->vm_ops = &zonefs_file_vm_ops; |
| |
| return 0; |
| } |
| |
| static loff_t zonefs_file_llseek(struct file *file, loff_t offset, int whence) |
| { |
| loff_t isize = i_size_read(file_inode(file)); |
| |
| /* |
| * Seeks are limited to below the zone size for conventional zones |
| * and below the zone write pointer for sequential zones. In both |
| * cases, this limit is the inode size. |
| */ |
| return generic_file_llseek_size(file, offset, whence, isize, isize); |
| } |
| |
| static int zonefs_file_write_dio_end_io(struct kiocb *iocb, ssize_t size, |
| int error, unsigned int flags) |
| { |
| struct inode *inode = file_inode(iocb->ki_filp); |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| |
| if (error) { |
| /* |
| * For Sync IOs, error recovery is called from |
| * zonefs_file_dio_write(). |
| */ |
| if (!is_sync_kiocb(iocb)) |
| zonefs_io_error(inode, true); |
| return error; |
| } |
| |
| if (size && zonefs_inode_is_seq(inode)) { |
| /* |
| * Note that we may be seeing completions out of order, |
| * but that is not a problem since a write completed |
| * successfully necessarily means that all preceding writes |
| * were also successful. So we can safely increase the inode |
| * size to the write end location. |
| */ |
| mutex_lock(&zi->i_truncate_mutex); |
| if (i_size_read(inode) < iocb->ki_pos + size) { |
| zonefs_update_stats(inode, iocb->ki_pos + size); |
| zonefs_i_size_write(inode, iocb->ki_pos + size); |
| } |
| mutex_unlock(&zi->i_truncate_mutex); |
| } |
| |
| return 0; |
| } |
| |
| static const struct iomap_dio_ops zonefs_write_dio_ops = { |
| .end_io = zonefs_file_write_dio_end_io, |
| }; |
| |
| /* |
| * Do not exceed the LFS limits nor the file zone size. If pos is under the |
| * limit it becomes a short access. If it exceeds the limit, return -EFBIG. |
| */ |
| static loff_t zonefs_write_check_limits(struct file *file, loff_t pos, |
| loff_t count) |
| { |
| struct inode *inode = file_inode(file); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| loff_t limit = rlimit(RLIMIT_FSIZE); |
| loff_t max_size = z->z_capacity; |
| |
| if (limit != RLIM_INFINITY) { |
| if (pos >= limit) { |
| send_sig(SIGXFSZ, current, 0); |
| return -EFBIG; |
| } |
| count = min(count, limit - pos); |
| } |
| |
| if (!(file->f_flags & O_LARGEFILE)) |
| max_size = min_t(loff_t, MAX_NON_LFS, max_size); |
| |
| if (unlikely(pos >= max_size)) |
| return -EFBIG; |
| |
| return min(count, max_size - pos); |
| } |
| |
| static ssize_t zonefs_write_checks(struct kiocb *iocb, struct iov_iter *from) |
| { |
| struct file *file = iocb->ki_filp; |
| struct inode *inode = file_inode(file); |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| loff_t count; |
| |
| if (IS_SWAPFILE(inode)) |
| return -ETXTBSY; |
| |
| if (!iov_iter_count(from)) |
| return 0; |
| |
| if ((iocb->ki_flags & IOCB_NOWAIT) && !(iocb->ki_flags & IOCB_DIRECT)) |
| return -EINVAL; |
| |
| if (iocb->ki_flags & IOCB_APPEND) { |
| if (zonefs_zone_is_cnv(z)) |
| return -EINVAL; |
| mutex_lock(&zi->i_truncate_mutex); |
| iocb->ki_pos = z->z_wpoffset; |
| mutex_unlock(&zi->i_truncate_mutex); |
| } |
| |
| count = zonefs_write_check_limits(file, iocb->ki_pos, |
| iov_iter_count(from)); |
| if (count < 0) |
| return count; |
| |
| iov_iter_truncate(from, count); |
| return iov_iter_count(from); |
| } |
| |
| /* |
| * Handle direct writes. For sequential zone files, this is the only possible |
| * write path. For these files, check that the user is issuing writes |
| * sequentially from the end of the file. This code assumes that the block layer |
| * delivers write requests to the device in sequential order. This is always the |
| * case if a block IO scheduler implementing the ELEVATOR_F_ZBD_SEQ_WRITE |
| * elevator feature is being used (e.g. mq-deadline). The block layer always |
| * automatically select such an elevator for zoned block devices during the |
| * device initialization. |
| */ |
| static ssize_t zonefs_file_dio_write(struct kiocb *iocb, struct iov_iter *from) |
| { |
| struct inode *inode = file_inode(iocb->ki_filp); |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| struct super_block *sb = inode->i_sb; |
| ssize_t ret, count; |
| |
| /* |
| * For async direct IOs to sequential zone files, refuse IOCB_NOWAIT |
| * as this can cause write reordering (e.g. the first aio gets EAGAIN |
| * on the inode lock but the second goes through but is now unaligned). |
| */ |
| if (zonefs_zone_is_seq(z) && !is_sync_kiocb(iocb) && |
| (iocb->ki_flags & IOCB_NOWAIT)) |
| return -EOPNOTSUPP; |
| |
| if (iocb->ki_flags & IOCB_NOWAIT) { |
| if (!inode_trylock(inode)) |
| return -EAGAIN; |
| } else { |
| inode_lock(inode); |
| } |
| |
| count = zonefs_write_checks(iocb, from); |
| if (count <= 0) { |
| ret = count; |
| goto inode_unlock; |
| } |
| |
| if ((iocb->ki_pos | count) & (sb->s_blocksize - 1)) { |
| ret = -EINVAL; |
| goto inode_unlock; |
| } |
| |
| /* Enforce sequential writes (append only) in sequential zones */ |
| if (zonefs_zone_is_seq(z)) { |
| mutex_lock(&zi->i_truncate_mutex); |
| if (iocb->ki_pos != z->z_wpoffset) { |
| mutex_unlock(&zi->i_truncate_mutex); |
| ret = -EINVAL; |
| goto inode_unlock; |
| } |
| /* |
| * Advance the zone write pointer offset. This assumes that the |
| * IO will succeed, which is OK to do because we do not allow |
| * partial writes (IOMAP_DIO_PARTIAL is not set) and if the IO |
| * fails, the error path will correct the write pointer offset. |
| */ |
| z->z_wpoffset += count; |
| zonefs_inode_account_active(inode); |
| mutex_unlock(&zi->i_truncate_mutex); |
| } |
| |
| /* |
| * iomap_dio_rw() may return ENOTBLK if there was an issue with |
| * page invalidation. Overwrite that error code with EBUSY so that |
| * the user can make sense of the error. |
| */ |
| ret = iomap_dio_rw(iocb, from, &zonefs_write_iomap_ops, |
| &zonefs_write_dio_ops, 0, NULL, 0); |
| if (ret == -ENOTBLK) |
| ret = -EBUSY; |
| |
| /* |
| * For a failed IO or partial completion, trigger error recovery |
| * to update the zone write pointer offset to a correct value. |
| * For asynchronous IOs, zonefs_file_write_dio_end_io() may already |
| * have executed error recovery if the IO already completed when we |
| * reach here. However, we cannot know that and execute error recovery |
| * again (that will not change anything). |
| */ |
| if (zonefs_zone_is_seq(z)) { |
| if (ret > 0 && ret != count) |
| ret = -EIO; |
| if (ret < 0 && ret != -EIOCBQUEUED) |
| zonefs_io_error(inode, true); |
| } |
| |
| inode_unlock: |
| inode_unlock(inode); |
| |
| return ret; |
| } |
| |
| static ssize_t zonefs_file_buffered_write(struct kiocb *iocb, |
| struct iov_iter *from) |
| { |
| struct inode *inode = file_inode(iocb->ki_filp); |
| ssize_t ret; |
| |
| /* |
| * Direct IO writes are mandatory for sequential zone files so that the |
| * write IO issuing order is preserved. |
| */ |
| if (zonefs_inode_is_seq(inode)) |
| return -EIO; |
| |
| if (iocb->ki_flags & IOCB_NOWAIT) { |
| if (!inode_trylock(inode)) |
| return -EAGAIN; |
| } else { |
| inode_lock(inode); |
| } |
| |
| ret = zonefs_write_checks(iocb, from); |
| if (ret <= 0) |
| goto inode_unlock; |
| |
| ret = iomap_file_buffered_write(iocb, from, &zonefs_write_iomap_ops); |
| if (ret == -EIO) |
| zonefs_io_error(inode, true); |
| |
| inode_unlock: |
| inode_unlock(inode); |
| if (ret > 0) |
| ret = generic_write_sync(iocb, ret); |
| |
| return ret; |
| } |
| |
| static ssize_t zonefs_file_write_iter(struct kiocb *iocb, struct iov_iter *from) |
| { |
| struct inode *inode = file_inode(iocb->ki_filp); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| |
| if (unlikely(IS_IMMUTABLE(inode))) |
| return -EPERM; |
| |
| if (sb_rdonly(inode->i_sb)) |
| return -EROFS; |
| |
| /* Write operations beyond the zone capacity are not allowed */ |
| if (iocb->ki_pos >= z->z_capacity) |
| return -EFBIG; |
| |
| if (iocb->ki_flags & IOCB_DIRECT) { |
| ssize_t ret = zonefs_file_dio_write(iocb, from); |
| |
| if (ret != -ENOTBLK) |
| return ret; |
| } |
| |
| return zonefs_file_buffered_write(iocb, from); |
| } |
| |
| static int zonefs_file_read_dio_end_io(struct kiocb *iocb, ssize_t size, |
| int error, unsigned int flags) |
| { |
| if (error) { |
| zonefs_io_error(file_inode(iocb->ki_filp), false); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static const struct iomap_dio_ops zonefs_read_dio_ops = { |
| .end_io = zonefs_file_read_dio_end_io, |
| }; |
| |
| static ssize_t zonefs_file_read_iter(struct kiocb *iocb, struct iov_iter *to) |
| { |
| struct inode *inode = file_inode(iocb->ki_filp); |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| struct super_block *sb = inode->i_sb; |
| loff_t isize; |
| ssize_t ret; |
| |
| /* Offline zones cannot be read */ |
| if (unlikely(IS_IMMUTABLE(inode) && !(inode->i_mode & 0777))) |
| return -EPERM; |
| |
| if (iocb->ki_pos >= z->z_capacity) |
| return 0; |
| |
| if (iocb->ki_flags & IOCB_NOWAIT) { |
| if (!inode_trylock_shared(inode)) |
| return -EAGAIN; |
| } else { |
| inode_lock_shared(inode); |
| } |
| |
| /* Limit read operations to written data */ |
| mutex_lock(&zi->i_truncate_mutex); |
| isize = i_size_read(inode); |
| if (iocb->ki_pos >= isize) { |
| mutex_unlock(&zi->i_truncate_mutex); |
| ret = 0; |
| goto inode_unlock; |
| } |
| iov_iter_truncate(to, isize - iocb->ki_pos); |
| mutex_unlock(&zi->i_truncate_mutex); |
| |
| if (iocb->ki_flags & IOCB_DIRECT) { |
| size_t count = iov_iter_count(to); |
| |
| if ((iocb->ki_pos | count) & (sb->s_blocksize - 1)) { |
| ret = -EINVAL; |
| goto inode_unlock; |
| } |
| file_accessed(iocb->ki_filp); |
| ret = iomap_dio_rw(iocb, to, &zonefs_read_iomap_ops, |
| &zonefs_read_dio_ops, 0, NULL, 0); |
| } else { |
| ret = generic_file_read_iter(iocb, to); |
| if (ret == -EIO) |
| zonefs_io_error(inode, false); |
| } |
| |
| inode_unlock: |
| inode_unlock_shared(inode); |
| |
| return ret; |
| } |
| |
| static ssize_t zonefs_file_splice_read(struct file *in, loff_t *ppos, |
| struct pipe_inode_info *pipe, |
| size_t len, unsigned int flags) |
| { |
| struct inode *inode = file_inode(in); |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| loff_t isize; |
| ssize_t ret = 0; |
| |
| /* Offline zones cannot be read */ |
| if (unlikely(IS_IMMUTABLE(inode) && !(inode->i_mode & 0777))) |
| return -EPERM; |
| |
| if (*ppos >= z->z_capacity) |
| return 0; |
| |
| inode_lock_shared(inode); |
| |
| /* Limit read operations to written data */ |
| mutex_lock(&zi->i_truncate_mutex); |
| isize = i_size_read(inode); |
| if (*ppos >= isize) |
| len = 0; |
| else |
| len = min_t(loff_t, len, isize - *ppos); |
| mutex_unlock(&zi->i_truncate_mutex); |
| |
| if (len > 0) { |
| ret = filemap_splice_read(in, ppos, pipe, len, flags); |
| if (ret == -EIO) |
| zonefs_io_error(inode, false); |
| } |
| |
| inode_unlock_shared(inode); |
| return ret; |
| } |
| |
| /* |
| * Write open accounting is done only for sequential files. |
| */ |
| static inline bool zonefs_seq_file_need_wro(struct inode *inode, |
| struct file *file) |
| { |
| if (zonefs_inode_is_cnv(inode)) |
| return false; |
| |
| if (!(file->f_mode & FMODE_WRITE)) |
| return false; |
| |
| return true; |
| } |
| |
| static int zonefs_seq_file_write_open(struct inode *inode) |
| { |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| int ret = 0; |
| |
| mutex_lock(&zi->i_truncate_mutex); |
| |
| if (!zi->i_wr_refcnt) { |
| struct zonefs_sb_info *sbi = ZONEFS_SB(inode->i_sb); |
| unsigned int wro = atomic_inc_return(&sbi->s_wro_seq_files); |
| |
| if (sbi->s_mount_opts & ZONEFS_MNTOPT_EXPLICIT_OPEN) { |
| |
| if (sbi->s_max_wro_seq_files |
| && wro > sbi->s_max_wro_seq_files) { |
| atomic_dec(&sbi->s_wro_seq_files); |
| ret = -EBUSY; |
| goto unlock; |
| } |
| |
| if (i_size_read(inode) < z->z_capacity) { |
| ret = zonefs_inode_zone_mgmt(inode, |
| REQ_OP_ZONE_OPEN); |
| if (ret) { |
| atomic_dec(&sbi->s_wro_seq_files); |
| goto unlock; |
| } |
| z->z_flags |= ZONEFS_ZONE_OPEN; |
| zonefs_inode_account_active(inode); |
| } |
| } |
| } |
| |
| zi->i_wr_refcnt++; |
| |
| unlock: |
| mutex_unlock(&zi->i_truncate_mutex); |
| |
| return ret; |
| } |
| |
| static int zonefs_file_open(struct inode *inode, struct file *file) |
| { |
| int ret; |
| |
| file->f_mode |= FMODE_CAN_ODIRECT; |
| ret = generic_file_open(inode, file); |
| if (ret) |
| return ret; |
| |
| if (zonefs_seq_file_need_wro(inode, file)) |
| return zonefs_seq_file_write_open(inode); |
| |
| return 0; |
| } |
| |
| static void zonefs_seq_file_write_close(struct inode *inode) |
| { |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); |
| struct zonefs_zone *z = zonefs_inode_zone(inode); |
| struct super_block *sb = inode->i_sb; |
| struct zonefs_sb_info *sbi = ZONEFS_SB(sb); |
| int ret = 0; |
| |
| mutex_lock(&zi->i_truncate_mutex); |
| |
| zi->i_wr_refcnt--; |
| if (zi->i_wr_refcnt) |
| goto unlock; |
| |
| /* |
| * The file zone may not be open anymore (e.g. the file was truncated to |
| * its maximum size or it was fully written). For this case, we only |
| * need to decrement the write open count. |
| */ |
| if (z->z_flags & ZONEFS_ZONE_OPEN) { |
| ret = zonefs_inode_zone_mgmt(inode, REQ_OP_ZONE_CLOSE); |
| if (ret) { |
| __zonefs_io_error(inode, false); |
| /* |
| * Leaving zones explicitly open may lead to a state |
| * where most zones cannot be written (zone resources |
| * exhausted). So take preventive action by remounting |
| * read-only. |
| */ |
| if (z->z_flags & ZONEFS_ZONE_OPEN && |
| !(sb->s_flags & SB_RDONLY)) { |
| zonefs_warn(sb, |
| "closing zone at %llu failed %d\n", |
| z->z_sector, ret); |
| zonefs_warn(sb, |
| "remounting filesystem read-only\n"); |
| sb->s_flags |= SB_RDONLY; |
| } |
| goto unlock; |
| } |
| |
| z->z_flags &= ~ZONEFS_ZONE_OPEN; |
| zonefs_inode_account_active(inode); |
| } |
| |
| atomic_dec(&sbi->s_wro_seq_files); |
| |
| unlock: |
| mutex_unlock(&zi->i_truncate_mutex); |
| } |
| |
| static int zonefs_file_release(struct inode *inode, struct file *file) |
| { |
| /* |
| * If we explicitly open a zone we must close it again as well, but the |
| * zone management operation can fail (either due to an IO error or as |
| * the zone has gone offline or read-only). Make sure we don't fail the |
| * close(2) for user-space. |
| */ |
| if (zonefs_seq_file_need_wro(inode, file)) |
| zonefs_seq_file_write_close(inode); |
| |
| return 0; |
| } |
| |
| const struct file_operations zonefs_file_operations = { |
| .open = zonefs_file_open, |
| .release = zonefs_file_release, |
| .fsync = zonefs_file_fsync, |
| .mmap = zonefs_file_mmap, |
| .llseek = zonefs_file_llseek, |
| .read_iter = zonefs_file_read_iter, |
| .write_iter = zonefs_file_write_iter, |
| .splice_read = zonefs_file_splice_read, |
| .splice_write = iter_file_splice_write, |
| .iopoll = iocb_bio_iopoll, |
| }; |